XIM Community

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - slackchain

Pages: [1]
1
Hardware Compatbility / Corsair K70 RGB MK.2 not working!
« on: 03:53 PM - 03/28/19 »
I just purchased a brand new Corsair K70 low profile RGB mk.2 and I can not get it to work unless I put it in bios mode. Can this be looked into. Before it I had a Corsair Strafe RGB MK and it worked just fine without bios mode. Also it allowed all my macros saved to on board memory to work. K70 works great in bios mode, but no macros.

2
Game Support / Anthem? ST?
« on: 10:17 AM - 02/28/19 »
Does anyone know when the ST for this Anthem will be available? Really be nice to get a smooth ST working. I have been using Destiny 2 but fine movement are still not the best.

3
Game Support / Fortnite-XIM Apex (My Settings)
« on: 04:50 PM - 03/11/18 »
This is a copy of my Config.  If you try please let me know what you think..
Hardware used below

Corsair Keyboard, G502 mouse at 1000Hz Poll Rate with 12000 dpi.

>>> XIM APEX [Fortnite] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

4
Beta / XIM APEX **Firmware 20180303 Beta Testing**
« on: 02:43 PM - 03/06/18 »

Quote
I worked very hard on my Fortnite config. hardware -  Corsair gaming keyboard with a Wired G502 with Logetich mouse pad. Set all hardware at 1000 poll rate along with the XIM Apex. My G502 is set at 4000 DPI. My Apex sensitivities at HIP 252 with ads translator and ADS is 252. Poll rate at 1000 on Apex. I tried smoothness from 1 to 20 an could not get a good feel. However, changed the Apex to 500 poll rate and all hardware at 1000 and changed sensitives to HIP 126 and ADS 126 smoothness at 0 and It a pretty sweet feeling. It might be just me but with the poll rate at 1000 on the Apex with smoothness over 5 sniping wascrap because minor movement was impossible. If I moved the mouse slow it was not registering it. This does not happen with the pollrate at 500. Also I have not tried changing my DPI from 4000 due I have read others having issues at high DPI settings also.

Okay, So I maxed out my G502 at 12k DPI. ADS and HIP at 83 sensitivity and smoothness set to 1 for both. The jerky mouse movement is gone. However, It now feels floaty like the 1 to 1 was lost. I also just saw a beta firmware release for the Apex so on to some more testing. So far I feel the best aim setting in Fortnite is with the 4000 dpi at 500 poll rate.

After Beta Firmware
Okay, Here it is!! This is my sweetest Fortnite aiming setup yet. I have been tweaking for days and now I'm pretty sure I have found my happy place. This is the best 1 to 1 feel yet paying Fortnite on XBOX ONE X at 60FPS. The APEX is just awesome!

XIM APEX [Firmware 20180303] (Beta)
G502 at 2200 DPI. Yes.. 2200 DPI
Poll Rate 1000Hz
Sensitivity HIP -  453.00 - HIP Translator
Sensitivity ADS - 453.00 - ADS Translator
Smoothness 6 for hip and 7 for ADS.

I know this is close to the 500 sensitivity cap, but I'm telling you with the G502 this is the sweetest aiming when playing Fortnite.

I have spent several hours of testing different setting within Fortnite mostly. I can tell you that the Smoothness setting with the BETA Firmware works awesome! I was super shocked with the results! Why to go XIM Team

5
I have been playing Fortnite with the Apex for hours. So far very happy with it.

Question,  on my XIM4 on the ADS config screen you could click the activation button and then click it again and it would say NONE. Then you could save it and you would just be using the HIP when you would aim down sight. On the APEX if I remove the activation key and save it then exit out and come back in it will still have the button I use for ADS bound for the activation.

However the translators are pretty sweet. I have a work around, but just wanted to know why is not saving the removed ADS activation key if that is wanted? Or the disable feature like for World Monster Hunter would be awesome on all configs.

6
XIM APEX Discussions / GOT MY APEX 1 MINUTE AGO!
« on: 03:32 PM - 03/02/18 »
I just want to say thank you to the XIM Team!

7
XIM 4 Discussions / G502 New Firmware issue in Destiny!!
« on: 10:45 AM - 10/09/15 »
I have a G502 and it has never had this problem. I plug the mouse up to make a change to a button. Well there was a required firmware update. Woo Hoo Right!!  Well I completed the firmware update which was Verison 88.2.17. After the update I did not make any other changes until I tested it. Well now in Destiny if you have an Auto rifle out like Suros it will fire a few rounds and stop, sometimes it will fire the hole mag out. Then sometimes it will only fire one round. Has any one else had this issue. Also I have been reading looking for a way to go back to my old firmware. I can not find a way to rollback..   Thank you

Wanted to add I have test another mouse (old Logitech G9) It works fine not issues.

8
Hardware Compatibility / G510s Keyboard Question.
« on: 10:19 AM - 10/05/14 »
I have just purchased a G510s keyboard. When I have it hooked to my computer the LED is the color I set it to which is RED. That is set under the default profile and I have not added any other profiles. When I plug it up to the XIM4 the keyboard LED is white. I was trying to have everything the same color as displayed on my XIM4. IS this possible. Thank you

9
XIM 4 Discussions / Pasting ballistic curve, Help.
« on: 12:51 PM - 09/20/14 »
I my be missing something. I have the XIM4 and want to paste a ballistic curve I found for Destiny. I copied it to clip board and can not for the life of me get it to load into the XIM4 Manager. I use a desktop pc and Bluetooth to my xim4.

What am I missing?

10
I have the mouse and keyboard unhooked from the xim4. When I plug the controller into the xim4 with the chat cable hooked to my turtle beach seven series headphones. it has a buzz and ticking sound. When I move one of the controller sticks the buzzing increases. My friends in the chat or party say it is loud. If I unplug the controller from the xim4 the buzzing stops. Also if the controller is attached wireless to the Xbox one it does not buzz when chatting with friends. I used the same setup with my xim3 on my xbox 360 and it works great ( no buzzing).

I did some more testing last night trying to stop this issue. I plug the micro usb cable into the xbox one and then into the controller by passing the xim4. (no buzzing) Seems like a ground issue when going through the xim4. Is there something I can do. I have tried 4 cables and two are high shielded cables.

11
Support / [ACTIVE] Bad buzzing with chat hooked up
« on: 02:00 AM - 09/19/14 »
I have the mouse and keyboard unhooked from the xim4. When I plug the controller into the xim4 with the chat cable hooked to my turtle beach seven series headphones it has a buzz and ticking sound. My friends in the chat or party say it is load. If I unplug the controller from the xim4 the buzzing stops. Also if the controller is attached wireless to the Xbox one it does not buzz when in s chat with friends. They say it is clear.  I used the same setup with my xim3 on my xbox 360 and it works great ( no buzzing).

12
Hardware Compatibility / G9 Mouse and latest Firmware!
« on: 11:00 AM - 09/09/11 »
A few weeks back I posted about a problem with Gow2 and xim3. In the game Gears of war 2 I would be firing the pistol or hammerburst and it would stop firing after about 3 shots. Well I have flashed my xim3 back to firmware verison 1.00.20110407 and the problem does not exist.. Firing is much faster and I can now see when I do hit the Firing Cap. I would like to run the news firmware so I can use the xim manager. My mouse is a logitech G9 (not g9x) with the latest firmware flashed to the mouse.

13
Support / Logitech g9 mouse firing...?
« on: 12:52 PM - 08/31/11 »
In gears of war 2 I can click my mouse fast and it stops shooting.. I have bind the fire key to a key on the keyboard and tap it fast and it will fire like it is suppose to. I'm using a Logitech g9 mouse.
What is going on! I have not tried anyone game because i do not have a different game.


14
Hardware Compatibility / logitech g9 stops firing!
« on: 12:38 PM - 08/31/11 »
In gears of war 2 I can click my mouse fast and it stops shooting.. I have bind the fire key to a key on the keyboard and tap it fast and it will fire like it is suppose to. I'm using a Logitech g9 mouse.
What is going on! I have not tried anyone game because i do not have a different game.

Pages: [1]
Admin