XIM Community

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - Taktikz

Pages: [1] 2
Game Support / Hunt Showdown PS4 Where is the ST?
« on: 12:37 PM - 03/08/20 »
I thought hubt showdown st was going to be released with the update on 06/03??... where is it please?

Game Support / Darwin Project??
« on: 12:17 PM - 01/24/20 »
Hi. I cant see darwin project ST in the xim app? When I click new it's not listed on there. It shows on the forum game settings page though? I have forces games download and it's still not there??

Hardware Compatbility / Logitech G502 DPI Button Question
« on: 08:51 AM - 10/10/19 »
Is there a way to change the DPI UP & DOWN buttons on the G502 Mouse to normal buttons?

I have the software installed on my computer, just wondering how I can make the dpi buttons be programme-able buttons... because when I press them at the moment they just change DPI up/down.

Reason I am asking is because I am 1 button short for Ghost recon breakpoint (I am using the Nav controller) .. I want to assign my R3 button as one of my DPI buttons on the mouse but don't know how

Game Support / Blackout Looks Darker Since Last Update
« on: 03:32 AM - 11/22/18 »
Anyone else notice this or am I going mad in my old age? Blackout looks darker since the update... I haven't changed any of my monitor settings but @#$% when I went into the Bunker below Nuketown usually my Black Equalizer kicks in well and it doesn't look too dark, but now... it's so dark.

Have they dumbed down the graphics to try and make it run smoother? Or am I just losing my marbles?


I am going to change Firmware for my XIM4 tonight, I am currently using the most up to date Firmware, I am going to change it to SA3 purely for Black Ops 4, will I lose all my configs if I do this?

Also do I need to do "Factory Reset" before I click "Update Firmware" ? Or do I just press Update Firmware.

Please advise ASAP as I will be doing this in the next hour or so.

Game Support / BOPS 4 ADS + Hold Breath
« on: 09:59 AM - 10/22/18 »

Is there a way to configure the hold breath Button the same as my ADS button when sniping?

So I use Sony Nav, L2 on Nav is my ADS button, if I also put nav L2 as my sprint button (hold breath) on secondary bindings but leave L1 bumper on Nav as my primary sprint button, will it let me ADS + Hold Breath at the same time when I press L2 on the nav?

Or will doing this make me sprint instead of ADS every time I press L2 on the nav?

Hope that makes sense, hard for me to explain what I mean.

Game Support / Warface ST
« on: 03:52 AM - 09/23/18 »
Is this going to be added as an St? Its new f2p game on ps4 bit like cod

« on: 08:53 AM - 09/19/18 »
How can I convert a XIM APEX sensitivity to XIM4, or vice versa?

I.e. if my APEX sensitivity is 20, what sensitivity would that be on XIM4? (Using same DPI for both).

Thanks in advance.

After last nights patch, Aim Assist Legacy Mode has been added in the options, anyone know what this means now?

Game Support / Ive found best st for h1z1
« on: 12:04 PM - 05/24/18 »
PVZ2. XIM4. HIP. 12. ADS 6.50.
RML Anti Aim Assist Curve.
It works really good. You can micro ads with this st.
Give me feedback guys
Msging from mobile sorry.

Game Support / H1Z1 ST Incoming ?!
« on: 03:08 AM - 05/22/18 »

Just wondering whether you're making an ST for this for XIM4/APEX (I am still on the XIM4).

Game looks awesome, downloading it while at work right now, just wondering how long until we can expect an ST for this?


Game Support / R6 Siege PS4 XIM4
« on: 05:08 AM - 03/05/18 »
Hey Guys.

I have ordered R6 Siege which should arrive today.

Could anyone suggest some optimal settings for me please? I will be using Sony Nav Controller + G502 12K DPI 1000HZ Mouse.

I fear this game is tricky to get decent settings for... any help would be appreciated.

XIM APEX Discussions / Od1n - Overwatch Question
« on: 11:14 AM - 02/21/18 »
Hey Od1n,

I currently use the below for Overwatch;

12K DPI @ 1000HZ
HIP: 5

Do you know what this would translate to for the APEX?

Would just like to know so when I get the APEX I can get rolling on it straight away.

What full settings are you using at the moment for OW on APEX? =)

XIM APEX Discussions / XIM APEX on Overwatch Question
« on: 04:39 AM - 01/31/18 »

Have any of the testers played Overwatch using the XIM APEX yet?

I ask because Overwatch on PS4 is currently the only game I play at the moment, I'm hooked on it and have my own team in a league etc.

It's an important question for me because I'd like to know whether the difference using the APEX compared to the XIM4 is noticeable/significant enough, specifically on Overwatch, for me to warrant purchasing the APEX or not.

I'd really like some in depth feedback on this if any of the testers could kindly oblige.


Game Support / Does SA3 Support PS4 Pro?
« on: 09:37 AM - 12/07/17 »
Need to know because I am going to try Hoodlums Overwatch set up tonight and he states that he uses SA3, whereas I am currently using GOLD firmware.

Or will Hoodlums setup still work exactly the same for me using GOLD?

Hoodlums setup below.

AA - 100 (with linear it feels better to leave at max even for pharrah, but i don't play her a lot so you may want to mess around with AA for her and lucio)
Aim Smoothing - 0
AA Window 25
SENS - 100 for both
RAMP - Linear

ST - Console Controller Crossover
MOUSE DPI - 12k/1000hz polling no angle snapping
SENS - 9.5
Y/X RATIO - 1.5


I really didn't like the way boost cut off the beginning of the curve so I found some curves that have proven to work for me without boost.  I am posting all 3 since personal preference may differ.  Also remember to adjust sens to your liking since your mousepad/mouse may provide different results.

CURVE 1 SENS:  9.5
CURVE 2 SENS:  16.5

All curves use the same settings posted above.  The only thing that differs is the sens.

****CURVE 1****

>>> XIM4 [Mouse Ballistics] START PASTE >>>
<<< XIM4 END PASTE <<<


I have played around with linear quite i bit and this feels the best to me.  Great turn speed and precise accuracy with small mouse movements.

****CURVE 2****

>>> XIM4 [Mouse Ballistics] START PASTE >>>
<<< XIM4 END PASTE <<<


I have shared settings with a few friends of mine and a couple (mind you this is at GM level) have said they really like the feel of this one.  It is the standard 8.5 curve with max turn speed cutoff.

****CURVE 3****

>>> XIM4 [Mouse Ballistics] START PASTE >>>
<<< XIM4 END PASTE <<<


This curve, at first, felt really good but with my setup pulled slightly when trying to track.  In theory this is the 8.5 curve "henrylibre style."  It may work for others so I wanted to share.

Please keep in mind that sens is personal pref.  Please do not dismiss curves without adjusting the sens to your liking.  Typically what i do is adjust the sens til i hit my desired turn speed and then play with the curve for 1-2 hours.  Don't test this in training ground, but actually against real players.  You wont really know how good it feels until you do.  This is my personal experience, but i can attest the right way to test your curves.

Please make sure you guys keep posting your settings if you change things up.  This just helps the XIM users to get that much closer to finding the perfect setup for linear.

Pages: [1] 2