Topics

1

General Discussion / Lucidsound LS50X or Steelseries Arctis 9X headset

« on: 12:13 PM - 11/11/21 »

Hi, I want a new wireless headset and have narrowed it down to either the Lucidsound LS50X or the Steelseries Arctis 9X headset, any opinions or advice would be appreciated?

2

Hardware Compatbility / Xbox series X controller USB-C cable question

« on: 05:01 PM - 11/12/20 »

What spec USB-C cable does the Xbox series X controller use ?

3

Shared Configs / Bully's COD MW Config (Linear & Precision) (updated 07/18/2021)

« on: 07:51 AM - 03/01/20 »

I am now using a new hip curve and Blamers ADS curve  (Thanks Blamer and props to all his hard work)

Settings are for XBox  (I'm using a Series X)

In-game Settings
20
20
Deadzone - 0.7 (Xbox)
ADS low zoom set to 1.0x
ADS high zoom set to 1.0x
Aim response curve - Linear (I find this more responsive)
Aim assist - Pecision

Xim Apex
Latest XIM Apex Beta Firmware 20210625.  https://community.xim.tech/index.php?topic=94701.0
Call of Duty MW (2019) ST
500hz

I use the Sony NAV controller.


G502 LIGHTSPEED Wireless
Razer Softpad
1000hz
24,000 DPI

HIP
Sens: 4.00
Sync: Default
Smoothing - 15
Y/X: 1.0
No boost, No Steady Aim
SAB: OFF

Hip curve -

Code: [Select]

>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:AAABAAIBAwEEAgUCBgIHAwgDCQQKBAsFDAUNBQ4GDwYQBxEHEgcTCBQIFQkWCRcJGAoZChoLGwscCx0MHgwfDSANIQ4iDiMOJA8lDyYQpxAnECcQJxAnECcQJxAnECcQJxAnECcQ:X5BC
<<< XIM APEX END COPY <<<

ADS -
Sens: 4.50
Sync: Default
Activation delay - 224
Deactivation delay - 224
Smooth aim transition - Selected
Smoothing - 15
Y/X: 1.0
No boost, No Steady Aim
SAB: OFF

ADS curve -

Code: [Select]

>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:AAAA7gHcAsoDuASmBZUGgwdxCF8JTQo7CykMFw0FDfMO4g/QEL4RrBKaE4gUdhVkFlIXQBguGR0aCxr5G+cc1R3DHrEfnyCNIXsiaiNYJEYlNCYipxAnECcQJxAnECcQJxAnECcQ:X5BC
<<< XIM APEX END COPY <<<
Full config, I use a Sony nav controller so remember you will need to change button configs -

Code: [Select]

>>> XIM APEX [Bully/Blamer default sync] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

4

XIM APEX Discussions / Return of button config copy/paste?

« on: 03:06 AM - 12/15/18 »

Will we see the return of the button config copy/paste function?

5

Technical Support / [RESOLVED] Xim Apex purple flashing light

« on: 01:14 PM - 08/01/18 »

My Apex has suddenly started flashing purple when I move my mouse.  Running latest firmware.  I can still move and play ok it just flashes purple.

Will this help diagnose -

[00036] Q[0] E[0] M[0] | S[0] C[1828] T[0] I[0] R[  67,  73,1000] U[50] [26] *^
[00037] Q[0] E[0] M[0] | S[0] C[1828] T[0] I[0] R[  72, 343,1000] U[50] [18] *^
[00038] Q[0] E[0] M[0] | S[0] C[1835] T[0] I[0] R[  70, 329,1000] U[50] [28] *^
[00039] Q[0] E[0] M[0] | S[0] C[1908] T[0] I[0] R[ 116, 390,1000] U[50] [20] *^
           HR[07] HT[02] DV[04] TR[07] BT[00] TW[00] UI[00] EN[00]
    T0[263] | [263] | [  3] [C-MK]
      X1[230] GK[229] GM[253] IP[148]
[00040] Q[0] E[0] M[0] | S[0] C[2000] T[0] I[0] R[ 199, 416,1000] U[49] [35] *^
[00041] Q[0] E[0] M[0] | S[0] C[2365] T[0] I[0] R[ 292, 421,1000] U[50] [34] *^
[00042] Q[0] E[0] M[0] | S[0] C[2912] T[0] I[0] R[ 284, 425,1000] U[50] [36] *^
[00043] Q[0] E[0] M[0] | S[0] C[3253] T[0] I[0] R[ 230, 420,1000] U[50] [33] *^
[00044] Q[0] E[0] M[0] | S[0] C[3766] T[0] I[0] R[ 261, 414,1000] U[50] [33] *^
           HR[08] HT[03] DV[04] TR[16] BT[00] TW[00] UI[00] EN[00]
    T0[271] | [271] | [  3] [C-MK]
      X1[252] GK[239] GM[261] IP[148]
[00045] Q[0] E[0] M[0] | S[0] C[4028] T[0] I[0] R[ 159, 408,1000] U[50] [28] *^
[00046] Q[0] E[0] M[0] | S[0] C[4305] T[0] I[0] R[ 198, 383,1000] U[49] [28] *^
[00047] Q[0] E[0] M[0] | S[0] C[4327] T[0] I[0] R[ 102, 378,1000] U[50] [30] *^
[00048] Q[0] E[0] M[0] | S[0] C[4327] T[0] I[0] R[  68,  74,1000] U[50] [17] *^
[00049] Q[0] E[0] M[0] | S[0] C[4327] T[0] I[0] R[  67,  73,1000] U[50] [28] *^
           HR[07] HT[03] DV[04] TR[09] BT[00] TW[00] UI[00] EN[00]
    T0[270] | [270] | [  4] [C-MK]
      X1[242] GK[242] GM[255] IP[148]
[00050] Q[0] E[0] M[0] | S[0] C[4327] T[0] I[0] R[  68,  75,1000] U[50] [17] *^
[00051] Q[0] E[0] M[0] | S[0] C[4327] T[0] I[0] R[  66,  74,1000] U[50] [27] *^
[00052] Q[0] E[0] M[0] | S[0] C[4327] T[0] I[0] R[  68,  74,1000] U[50] [18] *^
[00053] Q[0] E[0] M[0] | S[0] C[4327] T[0] I[0] R[  67,  74,1000] U[50] [24] *^
[00054] Q[0] E[0] M[0] | S[0] C[4327] T[0] I[0] R[  68,  73,1000] U[50] [22] *^
           HR[07] HT[03] DV[03] TR[07] BT[00] TW[00] UI[00] EN[00]
    T0[258] | [258] | [  3] [C-MK]
      X1[241] GK[226] GM[237] IP[149]
[00055] Q[0] E[0] M[0] | S[0] C[4481] T[0] I[0] R[ 159, 416,1000] U[50] [29] *^
[00056] Q[0] E[0] M[0] | S[0] C[4493] T[0] I[0] R[  76, 347,1000] U[50] [27] *^
[00057] Q[0] E[0] M[0] | S[0] C[4499] T[0] I[0] R[ 110, 383,1000] U[50] [22] *^
[00058] Q[0] E[0] M[0] | S[0] C[4516] T[0] I[0] R[  86, 373,1000] U[50] [29] *^
[00059] Q[0] E[0] M[0] | S[0] C[4542] T[0] I[0] R[  70, 118,1000] U[49] [17] *^
           HR[07] HT[03] DV[04] TR[09] BT[00] TW[00] UI[00] EN[00]
    T0[269] | [269] | [  3] [C-MK]
      X1[238] GK[236] GM[253] IP[148]
[00060] Q[0] E[0] M[0] | S[0] C[4542] T[0] I[0] R[  66,  74,1000] U[50] [27] *^
[00061] Q[0] E[0] M[0] | S[0] C[4542] T[0] I[0] R[  70,  76,1000] U[50] [17] *^
[00062] Q[0] E[0] M[0] | S[0] C[4554] T[0] I[0] R[ 148, 385,1000] U[50] [29] *^
[00063] Q[0] E[0] M[0] | S[0] C[4554] T[0] I[0] R[  68,  74,1000] U[50] [19] *^

6

Technical Support / [Q/A] Logitech G502

« on: 07:55 AM - 05/07/18 »

I bought the G502 yesterday, set it up via the lgs and set it to 12000 dpi, as Inwas running the G700s at 8200 dpi I was expecting the sensitivity to increase quite a bit but it was hardly noticeable.  I saved it to the onboard memory. I tried it out this morning on my Apex and I was expecting to have to lower my sensitivity on my Apex but I only had to change by 1 - 2 digits?  Is this right, should I have notice a large jump in sensitivity on pc and Apex?

7

Technical Support / Apex manager software error

« on: 04:11 PM - 03/13/18 »

Getting this error every time I open the manager in wired mode

I uninstalled and reinstalled and still getting the error.  When I click OK the manager loads, want stop the annoying error pop up every time.  Any help would be great.

Running on Windows 10 home 64bit.

8

Technical Support / [Q/A] NAV Pairing

« on: 04:37 PM - 01/31/18 »

Just bought myself a Nav, it pairs ok and works but the red light on the Nav flashes constantly and fast, the Nav is fully charged.  Any help would be appreciated.

9

Hardware Compatibility / Roccat Sova

« on: 11:51 AM - 12/18/16 »

Is this Roccat Sova compatible with the XIM4 ? - http://www.roccat.org/en-GB/Products/Gaming-Keyboards/Sova/

10

Game Support / BO3 help

« on: 05:01 AM - 05/28/16 »

I have noticed the last few days of playing that sometimes it is hard to get on target whilst in ads, it feels like the reversed polarity of a magnet stopping me from getting on the target once I get to about 1/4 inch away.  Is there anything I can do to improve this. I am on Xbox one and using RML's setup, using firmware 20160405.

11

XIM 4 Discussions / Logitech G440 mouse pad

« on: 02:55 PM - 03/28/16 »

Bought the Logitech G440 mouse pad a couple of weeks ago and it has greatly improved the whole experience with the xim4.  Well worth the money imo.

12

Beta / XIM4 Firmware 20150716 Feedback thread

« on: 03:08 PM - 07/18/15 »

Upgraded to latest Firmware 20150716 and manager, no problems with the upgrade on my laptop and no connection issues.

I decided to back up all my old configs from 20150606 via copy paste including doing the ballistic curves separately, I know Obs has stated in another thread that Config copy/paste won't be compatible with this new build but the ballistic curves copy/paste does work as i thought I'd try it, if you copy only the ballistic curves from the previous build it will paste to the new build and save.  This is great as I was worried about setting up my curves again.

Not tried ipad/iphone yet, just setting it up on laptop tonight.

13

Hardware Compatibility / Cyber Snipa

« on: 05:18 AM - 12/28/14 »

Just to confirm my Cyber Snipa keyboard works with Xim4

14

XIM 4 Discussions / Xbox one controller firmware

« on: 04:09 AM - 12/27/14 »

Hi, you can update the xbox one controllers firmware, there is a new version out if I update it will it affect its use on my xim4 ?

15

Feedback / Great Product

« on: 04:11 PM - 12/17/14 »

Hi all,

I am a new user and have just received my xim4 and just want to say what a superb product it is and thank you.

I have been a pc gamer for many years and wanted to play on PS3 and Xbox but was unable to get to grips with any controller.  I bought a competitors product about 3 years ago (not sure I can name it so won't) it was ok but then stumbled across the xim4 and this blows the competition away, easier to set up, better quality and better mouse controller, this is just like playing on pc !!!  Really happy, thanks again.

I am using a G700s mouse bought just to use on my xim4 (this is the best mouse I have ever bought/used) and a Belkin N52te key pad which is also very good.