XIM Community

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Loki

Pages: [1] 2 3 ... 44
1
Sony Nav must plug the last, just plug only controller and mouse after normal state of xim status then plug PS Nav (wired).
If you want to use PS Nav wireless you need an extra Bluetooth Dongle.

1. Plug Xim, Mouse and Controller
2. Plug PS Nav (wired)
*Due to xim always detect PS Nav first
**For wireless PS Nav use
3. Unplug PS Nav (wired)
4. Plug BT Dongle wait for PS Nav connect to xim hub

Thank you. I will try this now.

Update: I just tried this and it woks. Thank You.

2
Sony Nav must plug the last, just plug only controller and mouse after normal state of xim status then plug PS Nav (wired).
If you want to use PS Nav wireless you need an extra Bluetooth Dongle.

1. Plug Xim, Mouse and Controller
2. Plug PS Nav (wired)
*Due to xim always detect PS Nav first
**For wireless PS Nav use
3. Unplug PS Nav (wired)
4. Plug BT Dongle wait for PS Nav connect to xim hub

Thank you. I will try this now.

3
I take it no one uses the Sony Nav, either that or I'm the only one with this problem.

4
XIM APEX Discussions / Re: G502 lightspeed users question
« on: 03:34 PM - 04/03/21 »
The lag input is 1ms there incredibly fast I own a light speed as well and switched from the wired g502...I thi k the light speeds faster...

Thank you

5
XIM APEX Discussions / Re: G502 lightspeed users question
« on: 03:31 PM - 04/03/21 »
I have 2 lightspeed mice (g502 and G Pro Superlight). Its all personal preference but I have found you don't really need to go any higher than 12k DPI to easily break through the AA bubble. In terms of report rate/polling, 1000hz works fairly well with lightspeed mice but I actually prefer to use 500hz as it mitigates some of my shaky unsteady hands. Edit your profiles on G-Hub then turn the mouse's onboard memory on making sure you have the correct profiles assigned to what you want to use on the Xim. I don't notice any lag using the mice in wireless mode. Have a look on rtings reviews, they will show you how good these mice are in terms of lag. Just in terms of syncs which you didn't mention, I used to play with sync off but then switched to common sync when I had a 60hz monitor, then default sync when I moved to a 120hz monitor which feels great at 12k dpi and 500hz polling. No issues breaking into targets bubbles and breaking back out again. I hope this helps!

Thank you. This was good information. I am tweaking my config now.

6
I am trying to use the Sony Nav with my Xim Apex as I did with the Xim 4 which is wired. As a user suggested (When I used the Xim4) I removed the battery from my Nav because I was using it wired only and it worked fine with the Xim4. If I connect everything to my laptop and open the Xim software on my laptop, I can set the buttons for my nav. When I press the buttons on my Nav the pressed buttons display on the Xim software on my laptop. If I hook everything to the Xbox series X the Sony Nav does not show up on the Xim app on my iPhone. If I plug the Xim Apex into the Xbox Series X first, followed by the Xim hub with the mouse and Sony Nav plugged in. The Sony icon shows up but when I press any buttons on the Sony Nav nothing is displayed on the Xim app. If I press buttons on the mouse they show up on the Xim app. I am able to control the Xbox Series X with the Xbox Series controller X while it is plugged into the Xim hub. What am I doing wrong? I am using Ximmanager 20210313. and I am using Firmware 20210223.

Thank you in advance.


Also worth mentioning. If I plug the Xim Apex into the laptop, followed by the Xim hub with the mouse and Sony Nav plugged in. The Sony Nav shows up on my iPhone app but if I press any buttons nothing displays on the Xim app on my iPhone. If I press any buttons on my mouse (G502 lightspeed) the key presses display on the Xim app on my iPhone.

Once again, Thank you.

7
I am trying to use the Sony Nav with my Xim Apex as I did with the Xim 4 which is wired. As a user suggested (When I used the Xim4) I removed the battery from my Nav because I was using it wired only and it worked fine with the Xim4. If I connect everything to my laptop and open the Xim software on my laptop, I can set the buttons for my nav. When I press the buttons on my Nav the pressed buttons display on the Xim software on my laptop. If I hook everything to the Xbox series X the Sony Nav does not show up on the Xim app on my iPhone. If I plug the Xim Apex into the Xbox Series X first, followed by the Xim hub with the mouse and Sony Nav plugged in. The Sony icon shows up but when I press any buttons on the Sony Nav nothing is displayed on the Xim app. If I press buttons on the mouse they show up on the Xim app. I am able to control the Xbox Series X with the Xbox Series controller X while it is plugged into the Xim hub. What am I doing wrong? I am using Ximmanager 20210313. and I am using Firmware 20210223.

Thank you in advance.

8
XIM APEX Discussions / Re: Xim app new system icon/option
« on: 10:33 AM - 03/24/21 »
If you are using the Beta (Manager and firmware), you will start to see Xbox Series X/S icons for games designed specifically for that platform. Destiny 2 is the first since its aiming system is unique on Xbox Series X/S. As we go forward, any new game that comes out that advertises support for Xbox Series X/S or any prior game that is updated to have unique aim on Xbox Series X/S will get the icon.

Thank you very much Sir.

9
Being that the Xim Apex works great with the Xbox Series X. Are there plans to make a Xbox Series X setting icon or are we just going to continue using the Xbox One icon? Also it would be nice if there was a console section that would allow me to read things about my preferred console versus having to read through a bunch of things I care nothing about. I'm sure the latter will offend some but that is not my attention. I just think it would be easier to click on Xim Apex Beta and then selecting Xbox Series X. I currently have to search which is still a extra step.

Thank you in advance.

10
XIM APEX Discussions / G502 lightspeed users question
« on: 09:37 AM - 03/24/21 »
What settings have you tried that work the best? I currently have my dpi set to 25600 and report rate set to 1000. I plan to use it with the Xbox Series X only. I haven't had time to test it yet. I am currently moving and everything is packed up. Should I turn the profile switch on for my mouse to use my saved settings that I saved as a profile? Last question. Do you notice any lag difference when using wireless vs wired?


Thank you in advance.

11
I've got the G502 lightspeed and the G Pro Superlight. I would say there are positives for both. G502 has more buttons and is very comfy in the hand (although a little heavy). The Superlight has minimal buttons but is so light and my aim is definitely quickly and more accurate. At the moment I play with the superlight and I am just having to get used to the lack of buttons on it.

Thank you

12
After reading reviews,  I'm going to go with the G502 Lightspeed.

Very popular XIM mouse  ;) Did try it myself but it was way too heavy and chunky for my liking, the lighter the better. Using the G305 alongside my Nav, got a G Pro Wireless Superlight just waiting to be used but I'm waiting for my Azeron so I can actually have enough buttons to use it.

Thank you

13
Consider buying a third party warranty if you can within 30 days or purchase. They can be a few dollars more and can make refunds for simple devices like a mouse faster when or if the button switches fail.


Thank you. I purchased a 4 year warranty.

14
Anything with the HERO sensor is nice with the XIM


After reading reviews,  I'm going to go with the G502 Lightspeed.

15
Anything with the HERO sensor is nice with the XIM

Thank you. G903 it is.

Pages: [1] 2 3 ... 44