XIM Community

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - geekdll

Pages: [1] 2 3 ... 12
1
After playing alot with the settings in the application from official ST for apex legends i found the perfect settings. smooth! no mouse stutter or mouse limit movement. Getting each game up to 10/15 kills easy! and loads of wins!

Video below for proof if you want te settings PM me i like to share them with you
 https://youtu.be/aSKSGTQlgns or in description of the video


Mouse DPI 12k (make sure its on 12k dpi) or config wont work good

AIM 35.00

Open Ballistics editor add follow code copy and paste it

>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:AAABfAL4BHQF8AdsCOgKZAvgDVwO2BBUEdATTBTIFkQXwBk8GrgcNB2wHywgqCIkI6ClHCUwJUQlWCVsJYAllCWoJbwl0CXkJfgmDCYgJjQmSCZcJnAmhCaYJqwmwCbUJugm/CcQ:X5BC
<<< XIM APEX END COPY <<<

Sync Off
Smooting 4

Y/X RATIO 1.00
Steady aim 0.0
Boost 0


ADS AIM
56.00
Sync Off
Smooting 7
Y/X Ratio 1.06
Steady aim 0.0
Boost 0

ingame
sens 8
ads 6/7
curve classic
deathzone smalll


Leave comment below

Feels good so far. thanks for sharing

2
I have an issue with the script, anyone have an idea how can i fix it? So i got it up and running and it works great!.. when it works.. often it happens that the digit led on the titan two changes from 0 to lets say 1 or 3,4 and when the digit change, the led changes from green to red as well. Thats when the script doesnt work anymore. Hitting the build buttons just fires up the gun instead of building. I have the same mouse as op and set it up exactly the same. The only way so far i found to temporarily fix this is to hit the buttons up and down next to the digit led to make it 0 and green again, but then out of nowehere it goes back to mostly 1, 3 or 4 and red. Not sure if the specific digits mean anything but letting know in case someone knows whats up with that. I tried rebinding keys on my keyboard so they dont get in the way with the script but didnt help much. Theres only two ways i quit from the building menu which are: pressing Q for axe and/or button on the mouse. Not really sure how to fix this problem, if anyone had the same issue or know how to help, please speak up. Thanks.

My connection is as follows:

Mouse connected to titan two port A. Titan connected to port 1 in apex. Keyboard to port 2 and controller to port 3. And then apex to ps4. I also have power supply plugged into apex.


You have to press the "END" button that you mapped on your mouse to reset the script to exit building mode.

Yes i know about that but it happens even if i am not building anything. Lets say i go to invetory and switch things up or something else. The thing is i cant tell what is causing it because it doesnt happen everytime if i go to invetory lets say. Happens randomly throughout the game playing it. Perhaps, im hitting the END button to quit such things as invetory amd so on and that causes it? Didnt pay attention to that yet. Maybe i need to hit Q to take out my axe instead of hitting the end button. Need to check on that but if anyone has any ides, feel free to let me know.

Try reseting the script by hitting "L" on the mouse scroll wheel press it in you should see your T2 reset to 0 green

3
I have an issue with the script, anyone have an idea how can i fix it? So i got it up and running and it works great!.. when it works.. often it happens that the digit led on the titan two changes from 0 to lets say 1 or 3,4 and when the digit change, the led changes from green to red as well. Thats when the script doesnt work anymore. Hitting the build buttons just fires up the gun instead of building. I have the same mouse as op and set it up exactly the same. The only way so far i found to temporarily fix this is to hit the buttons up and down next to the digit led to make it 0 and green again, but then out of nowehere it goes back to mostly 1, 3 or 4 and red. Not sure if the specific digits mean anything but letting know in case someone knows whats up with that. I tried rebinding keys on my keyboard so they dont get in the way with the script but didnt help much. Theres only two ways i quit from the building menu which are: pressing Q for axe and/or button on the mouse. Not really sure how to fix this problem, if anyone had the same issue or know how to help, please speak up. Thanks.

My connection is as follows:

Mouse connected to titan two port A. Titan connected to port 1 in apex. Keyboard to port 2 and controller to port 3. And then apex to ps4. I also have power supply plugged into apex.


You have to press the "END" button that you mapped on your mouse to reset the script to exit building mode.

4
Redacted are you running t2 through apex? And m&k through t2?
 Console - Apex - HUB  - Controller
                                 |
                                T2 ó- IA (Mouse) and IB (keyboard)?

Nope, I explained how I'm currently running it in the video. But as a diagram, I suppose it would look something as follows:

Console - APEX - HUB - Controller and Keyboard
                                 |
                                T2 - Mouse (Input A)

Oh just to report back having the Apex plugged into the T2 does not work with your script. The script would have to be rewrite to some degree for it work. Only way I got it to work was to have it setup like you explained. It was all working for me last night but woke up this mourning and did the firmware update to my T2 and now anything I plug into any of the inputs doesnt work so the output has issues. I tried all kinds of things and nothing solved it the output light that suppose to turn green when that port has activity doesnt even turn on anymore. I just order another one should be here Monday. I feel like this is a hardware issue with this one.

Does the output light turn green when you plug the T2 into the console or your PC by itself? If so, the APEX hub might be the issue. I had to use a different hub that I had lying around as the APEX hub wasn't allowing enough power to the T2. Cheers.

Nope no green output light no matter what I connect it to console directly or PC. I also tried a powered Hub instead of the Apex Hub and still got nothing. I even purchased a power supply for the Apex Hub and the T2 itself today just to trouble shoot and still got no output light no matter what. So Iím getting a new one delivered Monday and one will get sent back. I got to play a few games with it all working like your setup and it was fun. Thanks again for sharing. I also know there are some forum members on here who can write scripts so maybe we can get some more scripts going around with different setups like having the T2 connected to the console then the apex to the T2 

5
Redacted are you running t2 through apex? And m&k through t2?
 Console - Apex - HUB  - Controller
                                 |
                                T2 ó- IA (Mouse) and IB (keyboard)?

Nope, I explained how I'm currently running it in the video. But as a diagram, I suppose it would look something as follows:

Console - APEX - HUB - Controller and Keyboard
                                 |
                                T2 - Mouse (Input A)

Oh just to report back having the Apex plugged into the T2 does not work with your script. The script would have to be rewrite to some degree for it work. Only way I got it to work was to have it setup like you explained. It was all working for me last night but woke up this mourning and did the firmware update to my T2 and now anything I plug into any of the inputs doesnt work so the output has issues. I tried all kinds of things and nothing solved it the output light that suppose to turn green when that port has activity doesnt even turn on anymore. I just order another one should be here Monday. I feel like this is a hardware issue with this one.

6
This power supply for the Apex Hub was shared to in the forum as a known working power supply for the Apex Hub. So I and a few others have purchased one and it works very well with the hub. Just thought I share it here for others who are looking to purchase one that others are using and works. Also maybe this should also be added to the compatible hardware list of the Apex.

Power Supply: https://www.amazon.com/gp/product/B01DPCPAQS/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

This power supply was originally posted by Broken Toaster

7
I got one of these power supplies for my Apex hub and it works great. Thanks for sharing. This item should be posted in the hardware compatibility section for sure.  ;)

8
I just updated the video description to contain the link to the script :) cheers! and thanks for the heads up on that, i totally forgot

So will your script work if I plug everything into my apex then my apex into the t2?

Try it out. The good things in life come from experimentation ;) at least you'll know definitively if the answer is yes or no. i've never done it that way as i've never had to

I followed your video guide step by step multiple times and after I save a GPC script and input file I try to compile and I get 1 error. Check out this screen shot https://imgur.com/a/Yu1jd  Should I continue and save it to the T2? Maybe your posted the wrong script?

I responded to your similar comment on the video, but you need to look in the Online Resources section of your GTuner software - under GPC Headers, you'll find the light_k file. Save that to the same directory/folder as your script and all should be good


Got it working just like your setup. But my mouse which is a G502 stops responding after about 2 minutes of use. I think the USB port of my version of PS4 doest supply enough power. I think I need to get a power supply for the T2 to help power all of this.

9
I just updated the video description to contain the link to the script :) cheers! and thanks for the heads up on that, i totally forgot

So will your script work if I plug everything into my apex then my apex into the t2?

Try it out. The good things in life come from experimentation ;) at least you'll know definitively if the answer is yes or no. i've never done it that way as i've never had to

I followed your video guide step by step multiple times and after I save a GPC script and input file I try to compile and I get 1 error. Check out this screen shot https://imgur.com/a/Yu1jd  Should I continue and save it to the T2? Maybe your posted the wrong script?

10
I just updated the video description to contain the link to the script :) cheers! and thanks for the heads up on that, i totally forgot

So will your script work if I plug everything into my apex then my apex into the t2?

11
XIM APEX Discussions / Re: Apex with titan two
« on: 04:58 PM - 03/16/18 »
It should work either way.

But wouldn't scripting be different depending on what order you plug thing in?

I believe if you want the scripting to take place for the keyboard keys that are mapped to the mouse, then yes the order is important.

Are you using a power supply with your T2 setup? Your setup looks like this
G502 -> Titan Two (Input-A) -> APEX Hub (Port 2) -> APEX -> Console

Correct?

I plan to use my current Apex Setup just plugged into the T2 on the Port 2 port. Do you know if I have to use Port 2 or 1 on the T2 to connect my Apex that has everything else connected to it?

12
XIM APEX Discussions / Re: Fortnite | One button building
« on: 04:49 PM - 03/16/18 »
Just a heads up. Video has been recorded for the tutorial, just waiting for the Fortnite servers to come back online so I can record some gameplay to demonstrate exactly what the script is doing. This means the video should be out today, assuming servers come back on :)

Sounds great my T2 is gonna be delivered any minute now. I will provide feedback. Thanks

13
Awesome. I will give it a try now. I order mine already.

No need the PSU AC Adapter while using Apex, right?

I was told its optional for most setups. I get mine today. I plan to connect my current Apex setup to the T2 because I heard its the most optimal in terms of what you can do with it connect this way.

14
XIM APEX Discussions / Re: Apex with titan two
« on: 08:40 AM - 03/16/18 »
Most GPC scripts work out of the box with the simpler Apex > T2 > console setup.

It's only if you really want to push the mouse through the T2 upstream of the Apex that you'd do it the other way around. I've never needed to as all output from the Apex gets filtered through the T2, so things like rapid-fire, anti-recoil and sensitivity adjustments all work fine.

As do things like binding a key to a mouse button via Logitech Gaming Software - the Xim sees it as the key, e.g L1+R1 bound to C. DPI button on mouse also bound to C. Press DPI button = L1+R1.

Where things get a little complicated is if you want to bind macros to kb keys instead of button combos. In that case, the kb can be moved to the T2 in either scenario, but scripting gets a bit more complex.

In redacted's setup, only the mouse is passed through the T2. So mods mapped to kb keys won't work, e.g rapid-melee, double-jump etc. Given he's using a G502, they're possibly mapped to the mouse, so it'll still work for his needs, but the kb would be better off attached to the T2, or the Apex to the T2 instead to open up more possibilities, e.g auto-sprint on W press after XXX ms.

^ what he said

Iím getting my T2 today. Are there any tutorials you guys recommend to get me going.

15
XIM APEX Discussions / Re: Apex with titan two
« on: 12:55 AM - 03/16/18 »
It should work either way.

But wouldn't scripting be different depending on what order you plug thing in?

Pages: [1] 2 3 ... 12