Messages

1

Tutorials / Re: Tut: USB -> DualShock 4 adapter mod (WIP)

« on: 09:49 AM - 02/19/14 »

W11cE, my device after calibration as said before was out of sync, but rewireing the ground as the same as the pic above last week sorted the problem, and the problem with the select button infact turned out to be the triangle button wire had come loose from the teensy board, so I resoldered it back and all is good in the hood now, but puzzling that triangle would affect the start button not responding, maybe the wire touching certain points freaked the device out but as I said all is working fine now on my second unit which works like a charm. pulp get your mic working and hit me up on the ps4 chat and I'll run through some settings with you over the network mate.

2

Tutorials / Re: Tut: USB -> DualShock 4 adapter mod (WIP)

« on: 04:13 PM - 02/17/14 »

A question for W11cE or Roads or any other who wants to chime in, the options button on the ds4 = the start button on the ds3 and also in the arduino program ?, if so when in joy.Cpl and the start button is pushed on the xbox360 controller and it responds in the joy.cpl program so all is good, but once attached to the ps4 it fails to respond any thoughts.

3

Tutorials / Re: Tut: USB -> DualShock 4 adapter mod (WIP)

« on: 11:50 AM - 02/15/14 »

I'll be on from 7 ish again gmt time, and yeah pulp your the designated driver.

4

Tutorials / Re: Tut: USB -> DualShock 4 adapter mod (WIP)

« on: 06:44 AM - 02/15/14 »

No probs pulp the more the merrier.

5

General Discussion / Re: How "old school" are you?

« on: 05:53 AM - 02/15/14 »

anyone ever play "Vietcong"?


man that game was one of the best CTF games I ever played... the stream map was awesome sauce.


http://en.wikipedia.org/wiki/Vietcong_(video_game)

Vietcong Classic, great gameplay both storyline and multiplayer, after that I hit Americas Army and all the BF platforms for almost 5 yrs.

6

Tutorials / Re: Tut: USB -> DualShock 4 adapter mod (WIP)

« on: 05:49 AM - 02/15/14 »

Good games last night W11cE and Platten, we owned them for some time, won't do my stats any harm at all , on another note I got disconnected from the internet, due to high winds in my area last night sorry about that, BUT I'm back tonight with a vengeance.

7

Tutorials / Re: Tut: USB -> DualShock 4 adapter mod (WIP)

« on: 10:12 AM - 02/14/14 »

W11cE I will be on from 7ish uk time so 9ish your time I believe, I will add a chat room from 7gmt time onwards and I hope as many peeps will show for a bf4 mass carnage, if not there loss and I look forward to some good games tonight mate.

Psn I'd = LFtFiElDGeNeCiDe

8

Tutorials / Re: Tut: USB -> DualShock 4 adapter mod (WIP)

« on: 02:54 AM - 02/14/14 »

^^ Aus page 8 is all you need.

9

Tutorials / Re: Tut: USB -> DualShock 4 adapter mod (WIP)

« on: 06:04 PM - 02/13/14 »

I suppose here ?, need to make a decent time for everyone to see if they can make it tomarrow night, I know I'm in 100%, so let's see what pans out.

10

General Discussion / Re: How "old school" are you?

« on: 05:53 PM - 02/13/14 »

^

Classic,

Lol,

But I must admit, I did have astro wars as my first rig, followed by puck monster and the usual suspect of the hand held donkeykong.

11

Tutorials / Re: Tut: USB -> DualShock 4 adapter mod (WIP)

« on: 05:42 PM - 02/13/14 »

Finally, figured out after all this time of playing on my first device, what was wrong with my second device, the problem was diagnosed back to a grounding problem, so I rewired the ground back to the pcb board and all is perfect, so now I have 2 devices 1 stacked with 4131s and the other device holds 4151s and the xim edge beta, and in all truthfulness I can't tell which one apart, but I'm liking the fixtures on the beta, but I've become accustomed to my first W11cE device just using the xbox 360st and W11cE can back me up on that one after some gameplay with him, But to my final point, I would like to pay homage to W11cE for he's dedication and input which has been critical for us desperate ps4 users, and I want to round up every player who has built a W11cE device, and gather this Saturday night for a mass celebration on bf4, same side for a total mass domination for respect of W11cE, time wasters need not apply

Sign up

I'm in.

12

Tutorials / Re: Tut: USB -> DualShock 4 adapter mod (WIP)

« on: 05:40 PM - 01/22/14 »

Leftfield just had turning to one side and it was gone after calibration. What does calibration say? post the output of the viewer.

CM guy says its quite granular but he uses some old mouse. Told him to get some high DPI but havent heard back from him.

Sorry forgot to say, Roads I have never had it gone after calibration mate, always the same baffling head banging problem.

13

Tutorials / Re: Tut: USB -> DualShock 4 adapter mod (WIP)

« on: 05:28 PM - 01/22/14 »

^

Might have too Roads just to see what happens, to be all honest, I followed the tutorial from page 1 and also page 8 once W11cE complited the schematic, I was going to use carbon paint on the pads after they were soldered, but decided to not go down that route, so I have all the pads wired from the DS4 board and also the 5 dummy wires aswell which are still attached to the pads but they have been cut back and are not used, so if I solder the wires of l2 and r2 straight to my teensy, do you think this will solve my left trigger problem aswell ??.

Roads you can see my results in my pictures on page 23, after calibration I still had the left stick stuck top left, and as W11ce pointed out, my z axis and z rotation is also grounded tried a calibrate again tonight and same results all runs thru smoothly, and when I hit up joy.cpl I have the exact same problems, all mcp's are 4151s and all wires are correct, as I quoted earlier I have all the wires on the ds4 pad soldered even the dummy ones still, which I cut and left soldered on the pads due to the fact I did not use the carbon paint, as I said could this be a problem, but I thought it should  not because they are not connected to anything.

14

Tutorials / Re: Tut: USB -> DualShock 4 adapter mod (WIP)

« on: 08:10 AM - 01/22/14 »

^

Might have too Roads just to see what happens, to be all honest, I followed the tutorial from page 1 and also page 8 once W11cE complited the schematic, I was going to use carbon paint on the pads after they were soldered, but decided to not go down that route, so I have all the pads wired from the DS4 board and also the 5 dummy wires aswell which are still attached to the pads but they have been cut back and are not used, so if I solder the wires of l2 and r2 straight to my teensy, do you think this will solve my left trigger problem aswell ??.

15

Tutorials / Re: Tut: USB -> DualShock 4 adapter mod (WIP)

« on: 06:26 AM - 01/22/14 »

Resolder that MCP, helps sometimes. No MCP the wrong way? Sounds stupid but happens. Best I did was solder the double MCPs solder all cables to it and then see that one MCP was the way round. "Reaaaaaly" I shouted and laughed. Its so embarrassing talking to yourself LOL

Just checked mcp's, no they are fine all the right way even the ones doubled up.??