XIM Community

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Tony Venom

Pages: [1] 2 3 ... 8
1
change the input option under general within the game menu

Thanks for taking the time to respond. - So since the Xim isnt detected...when i connect it.the input option doesn't unlock which in turn doesnt let me select or deselect the control option, its stuck on keyboard and mouse. If i plug the ps4 controller in alone, it unlocks normally and lets me switch between control and kb/m but even if i do switch it once i put the xim in it just isnt picking anything up so its asking me to reconnect the control or go back to keyboard and mouse... - anyone else have any ideas?

just an FYI - im using the regular xim manager for pc with my normal ps4 ST - maybe thats what im doing wrong? - i dont know.

2
Game Support / Xim apex modern warfare PC - please help :)
« on: 02:01 AM - 06/08/20 »
Guys i apologize in advance, I've been searching but i guess my searching is trash.

Ok so, trying to use my xim apex with my pc for modern warfare, im using a ps4 controller.

So..if i connect the wired ps4 controller directly to the pc the controller lights up blue and the game picks it up normally...but when i connect the Xim apex to the pc and the control to the xim apex hub along with the keyboard and mouse ...i dont get a response - im running the xim apex pc manager and see the keys being picked up, but no action.. It's probably me overlooking something but i cant figure it out and my head hurts, could someone help me?.. thanks! :)

3
Little confused on the OP your ads sense is 440 but in the full config it's 500
Just clarifying which one is correct for the curve? :)

Sorry for the late response, im playing with both on 500 now, but if 440 ads feels better than by all means stick to that. - either or is ok, as long as it works for you!

4
Well according to the games I've been having it feel as if everything is tight and back to normal with the aim even though i haven't officially seen anything. Still curious if anyone has found the issue with the faster sensitivity - My games are going great and this config along with the curve are great for any range - keep me posted!

5
Soul already tried this but for those of u who probably haven't make sure your SYNC is set to "OFF" not to "Default" for both HIP and ADS. When i first started using this setting i overlooked that and i was super fast. Sync has to be set to OFF not default or anything else. Hope it helps

If anyone does find a fix for their issue PLEASE PLEASE post about it. In essence if we're using 800dpi, 1000hz/1000hz sync : off and 500 sens for hip and ads we should all share the same sensitivity..

6
Bro its my second day with the xim and by far these settings are insane thank you for sharing man i tried so many but this is the one

Glad theyre working for u, enjoy your xim bro!

7
Game Support / Re: Modern warfare St is 🗑
« on: 09:05 AM - 05/22/20 »
https://community.xim.tech/index.php?topic=87416.msg810927#msg810927


Hey guys, I have a very popular thread going right now with settings that might help you get back to your game. It's receiving lots of praise from the people that are using the settings and hopefully it works for you guys too. Give it a try.

8
Game Support / Re: MW aim mechanic problem FIX.
« on: 08:56 AM - 05/22/20 »
Quote
thats really weird, if ur mouse is at 800 dpi and 1000hz / 1000hz - and ur sync is off, this shouldn't be happening...i definitely recommend you double check ur dpi (JUST IN CASE- im sure u know what ur running but just as a troubleshooting step)then def check sync, and if u havent ..maybe even make sure to start a new config in case any other setting is hanging out in the background causing the problem. For me id have to swipe the mouse pretty good to do a 180...so this is definitely not normal...  if anyone else has any idea's let us know. Also...could u tell us what mouse you're using?

Yeah really is strange, double checked everything Sync off, 800 dpi 1000/1000

I'm using a Razer Viper Ultimate, will have another look in the morning and report back :)

Thanks again for ya help!


I'm stumped I'm pretty sure there's something we're overlooking. If you find out let me know i'd love to know what the issue was.

I am having the same issue mate, its way to fast for me and I literally had to lower my in- game sensitivity to 13 to compensate with the speed. Also, my ads multiplier low and high are default 1.00. did you change this at all?  I am also using G502, DPI 800 1000hz app 1000hz. I will try to copy your settings as you have recently updated your post. I will let you know if this fixes the issue.

I've tried again and triple checked my settings but still way to fast. I'm stumped too mate tbh Gonna go back to my RML ST for now and hope Obs and the crew could look at re training the ST

Try this conf:
https://community.xim.tech/index.php?topic=87193.0

Add ADS steady aim 5
In game dead zone 0,4

It is important that the value of 500 remains like this, to increase or decrease the sensitivity you must change the curve, it is very simple and the instructions for doing so are in the links of the conf


Just an FYI, same exact config we are using - with a different curve.

9
Game Support / Re: MW aim mechanic problem FIX.
« on: 08:51 AM - 05/22/20 »
Quote
thats really weird, if ur mouse is at 800 dpi and 1000hz / 1000hz - and ur sync is off, this shouldn't be happening...i definitely recommend you double check ur dpi (JUST IN CASE- im sure u know what ur running but just as a troubleshooting step)then def check sync, and if u havent ..maybe even make sure to start a new config in case any other setting is hanging out in the background causing the problem. For me id have to swipe the mouse pretty good to do a 180...so this is definitely not normal...  if anyone else has any idea's let us know. Also...could u tell us what mouse you're using?

Yeah really is strange, double checked everything Sync off, 800 dpi 1000/1000

I'm using a Razer Viper Ultimate, will have another look in the morning and report back :)

Thanks again for ya help!


I'm stumped I'm pretty sure there's something we're overlooking. If you find out let me know i'd love to know what the issue was.

I am having the same issue mate, its way to fast for me and I literally had to lower my in- game sensitivity to 13 to compensate with the speed. Also, my ads multiplier low and high are default 1.00. did you change this at all?  I am also using G502, DPI 800 1000hz app 1000hz. I will try to copy your settings as you have recently updated your post. I will let you know if this fixes the issue.


And now someone else with the same high speed issue using the same mouse i use. That makes it even more confusing for me. If someone knows why this is happening and can tell us how we can correct it that would be great. - My ADS multiplier is default but yesterday i went ahead and changed my low multiplier to match my hip movement and it did just that. feels good too. Some people enjoy the slowdown and some don't im going to play with it this way for a bit and see if it makes my gameplay any better. - Copy the settings and let me know what happens, im curious to find out whats causing this. - Maybe you guys are using a different firmware version???. I'm using XIM APEX [Firmware 20200307] (**LATEST**)

10
Game Support / Re: MW aim mechanic problem FIX.
« on: 08:46 AM - 05/22/20 »
Kinda disappointed there hasn't been any response from the XIM team about the Aim mechanic change in MW. But let me share something with you guys.

I've been trying to find a way to counter-act the "loose ADS" feeling a lot of us have been dealing with lately and I've made the following changes to my ST setup and all of a sudden my aiming is back on track and it feels responsive and accurate..

1. First and foremost drop your current ADS sensitivity a bit to a level to where you still feel like you can control it comfortably. The purpose of this is to smooth out the loose feeling we're getting under our current set ups. We're trying to counter act the changes and the ADS aiming does feel a bit more loose, so by slowing it down you're dialing it back in.
2. I changed my dead zone to 0.04  (from default 0.05)
3. And this is probably where i saw most of the change... for my ADS i changed my steady aim from 0 to 5.

All of a sudden I'm snapping again and I'm back on my game after a few days of unpredictable aiming. I was wondering if you guys could try what i did and tell me if you get the same result and we can build together to see if this is something that actually works. Give it a try and if you can report back. I'm looking forward to the feedback!

For those of you who are curious about my current set up I'm using a blend between the MJFAME setup and my custom curve. I'm going to post it for the people who'd like to follow the setup in its entirety. Let me tell you it's been amazing to me and this is a setup I'm going to stick with. Seems like we're always looking for the next best thing but thats also affecting our muscle memory and our accuracy, find something thats smooth close range / mid and long range like this is for me and stick to it.

the set up I'm using is the following :

I run a Logitech G502
800 dpi mouse
1000 hz polling rate mouse
1000 hz XIM

XIM HIP SETTINGS:

Hip sens : 500 (yes, i know it sounds crazy lol - trust the setup, it works)
Synchronize : OFF (make sure its OFF and not default, otherwise it'll feel really fast)
Smoothing : 20 (which is the max)
Y/X Ratio : 1.00
steady aim : 0
boost : 0
Simulate Analog Behavior (SAB) - OFF

XIM ADS SETTINGS:

activation / deactivation delay 224

ADS sens: 440
Synchronize : OFF
Smoothing : 20
Y/X Ratio : 1.00
Steady aim : 5
Simulate Analog Behavior (SAB) - OFF

Dead zone : 0.04

THIS CURVE IS FOR BOTH HIP AND ADS

Venom Curve :

Code: [Select]
>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:AAABvQN7BTgG9QiyCnAMLQ3qD6cRZZMiE1oTkRPJFAEUORRwFKgU4BUXlU8W8hiVGjcb2h19HyAgwyJlJAilqyW+JdEl4yX2JgkmHCYvJkEmVCZnJnomjCafJrImxSbYJuom/ScQ:X5BC
<<< XIM APEX END COPY <<<

Full configuration :

Code: [Select]
>>> XIM APEX [MJFAME / VENOM CURVE] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

Looking forward to all feedback lets work!


(UPDATE : ADDED FULL CONFIG FOR THOSE WHO ASKED)

Always used the conf of MJ but in recent days I could not hit any shot, thanks to the change in the value of steady aim my aim has returned to normal, thank you very much. I tried your curve but I'm too used to MJ's classic curve,, what are the differences between yours and the "classic" one?. Thank you so much for this, I was going crazy


Hey snoofy, im not a curve professional but i do know that the classic MJ curve required u to raise it up  all the way at 60 percent if u were playing a game that runs at 60 fps and do the same at 30 percent for a game that plays at 30 fps. I disregarded that and applied my curve which gives me more acceleration and it snaps onto targets smoothly. With the classic MJ curve i felt a bit sluggish and not as responsive as i feel with the curve i created.

11
Game Support / Re: MW aim mechanic problem FIX.
« on: 08:43 AM - 05/22/20 »
Quote
thats really weird, if ur mouse is at 800 dpi and 1000hz / 1000hz - and ur sync is off, this shouldn't be happening...i definitely recommend you double check ur dpi (JUST IN CASE- im sure u know what ur running but just as a troubleshooting step)then def check sync, and if u havent ..maybe even make sure to start a new config in case any other setting is hanging out in the background causing the problem. For me id have to swipe the mouse pretty good to do a 180...so this is definitely not normal...  if anyone else has any idea's let us know. Also...could u tell us what mouse you're using?

Yeah really is strange, double checked everything Sync off, 800 dpi 1000/1000

I'm using a Razer Viper Ultimate, will have another look in the morning and report back :)

Thanks again for ya help!


I'm stumped I'm pretty sure there's something we're overlooking. If you find out let me know i'd love to know what the issue was.

I am having the same issue mate, its way to fast for me and I literally had to lower my in- game sensitivity to 13 to compensate with the speed. Also, my ads multiplier low and high are default 1.00. did you change this at all?  I am also using G502, DPI 800 1000hz app 1000hz. I will try to copy your settings as you have recently updated your post. I will let you know if this fixes the issue.

I've tried again and triple checked my settings but still way to fast. I'm stumped too mate tbh Gonna go back to my RML ST for now and hope Obs and the crew could look at re training the ST


I lowered my sensitivity from 500 and i still felt the same smooth movements, why dont u try dialing it down and see if these settings could still work for you? - i'd give it a shot. I'm so confused though i dont understand why under the same exact dpi and settings you'd get a different speed....

12
Game Support / Re: MW aim mechanic problem FIX.
« on: 06:18 PM - 05/21/20 »
Quote
thats really weird, if ur mouse is at 800 dpi and 1000hz / 1000hz - and ur sync is off, this shouldn't be happening...i definitely recommend you double check ur dpi (JUST IN CASE- im sure u know what ur running but just as a troubleshooting step)then def check sync, and if u havent ..maybe even make sure to start a new config in case any other setting is hanging out in the background causing the problem. For me id have to swipe the mouse pretty good to do a 180...so this is definitely not normal...  if anyone else has any idea's let us know. Also...could u tell us what mouse you're using?

Yeah really is strange, double checked everything Sync off, 800 dpi 1000/1000

I'm using a Razer Viper Ultimate, will have another look in the morning and report back :)

Thanks again for ya help!


I'm stumped I'm pretty sure there's something we're overlooking. If you find out let me know i'd love to know what the issue was.

13
Game Support / Re: MW aim mechanic problem FIX.
« on: 01:59 PM - 05/21/20 »
Thx Tony, just tried it and it's still really fast. I can do nearly 3 full turns with one sweep of the mouse. Not really sure how to lower the sens tbh plus don't wanna mess with ya curve!

thats really weird, if ur mouse is at 800 dpi and 1000hz / 1000hz - and ur sync is off, this shouldn't be happening...i definitely recommend you double check ur dpi (JUST IN CASE- im sure u know what ur running but just as a troubleshooting step)then def check sync, and if u havent ..maybe even make sure to start a new config in case any other setting is hanging out in the background causing the problem. For me id have to swipe the mouse pretty good to do a 180...so this is definitely not normal...  if anyone else has any idea's let us know. Also...could u tell us what mouse you're using?

14
Game Support / Re: MW aim mechanic problem potential FIX.
« on: 12:43 PM - 05/21/20 »
Quote
If its super fast it probably means ur DPI is not set to 800 OR ur synchronization is DEFAULT and not OFF like its supposed to be, i made that same mistake and had it set to default instead of off LOL

Thx for the reply mate but that's not it, just double checked everything and it is set to off and 800dpi with mouse and xim at 1000hz :(

Could you paste your full config please and I'll try that?

Cheers :)


That's weird and no problem bro, here it is- Just adjust the controls back to your own preferences.
keep me updated on your results!

FULL CONFIG

Code: [Select]
>>> XIM APEX [MJFAME / VENOM CURVE] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

15
Game Support / Re: MW aim mechanic problem potential FIX.
« on: 12:00 PM - 05/21/20 »
Thx for this Tony :) I've just tried it now and it's super fast, not sure if I've done something wrong though lol

I just copied the curve into an existing MJFame setup, all the settings are as in your OP. Any ideas?

If its super fast it probably means ur DPI is not set to 800 OR ur synchronization is DEFAULT and not OFF like its supposed to be, i made that same mistake and had it set to default instead of off LOL

Pages: [1] 2 3 ... 8
Admin