XIM Community

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Sonicspinner

Pages: [1] 2 3 ... 5
1
however its a bit annoying/strange that i have bow down under the table and press the beloader button to initiate a connection everytime i want to have a gaming session. :(

it wasnt needed when i had beloader on wifi and connected behind the ps5.

I have the same problem. This was their answer.

Support" border="0
Great.
Thanx for the info buddy

2
Beta / Re: Which LAN adapter would work with Beloader?
« on: 08:02 AM - 02/10/22 »
then it ends with green LED which mean LAN connected

Thats my problem no green after the blue...  :-\

i had that problem too in the beginning. btw i  have plugged all this setup behind the ps5. no power adapter was needed.
i played 2 hours gaming session last night without  a problem and disconnect. heck i even had tons of kills and was mostly top on the list.

but try and plug it into the back of the ps5. also make sure that the config file is connected properly.
if everything still fails. try this

1. revert back to the wifi fw. make sure that this work, test it etc.
2. when wifi method work, then update the beloader with LAN fw again.
3. plug in the beloader to pc again in normal usb mode and open the wifi txt file.
4. write 1 in ssid and password and save.
5. now set up the whole LAN method again.
PS5-> Beloader -> USB hub -> LAN cable and  Xim APEX with hub.
now turn on the ps5. wait till its on the main screen.
press the beloader button and see if it gets past the blue LED.

Thank you very much for all your help... Still not working. I go back to Ps4 and hope for a better solution.

grr! i cant sleep if this is not fixed! ahha
add me on psn sonic_DK , we will talk some time, and see if we can solve it

3
Beta / Re: Which LAN adapter would work with Beloader?
« on: 03:00 AM - 02/10/22 »
then it ends with green LED which mean LAN connected

Thats my problem no green after the blue...  :-\

i had that problem too in the beginning. btw i  have plugged all this setup behind the ps5. no power adapter was needed.
i played 2 hours gaming session last night without  a problem and disconnect. heck i even had tons of kills and was mostly top on the list.

but try and plug it into the back of the ps5. also make sure that the config file is connected properly.
if everything still fails. try this

1. revert back to the wifi fw. make sure that this work, test it etc.
2. when wifi method work, then update the beloader with LAN fw again.
3. plug in the beloader to pc again in normal usb mode and open the wifi txt file.
4. write 1 in ssid and password and save.
5. now set up the whole LAN method again.
PS5-> Beloader -> USB hub -> LAN cable and  Xim APEX with hub.
now turn on the ps5. wait till its on the main screen.
press the beloader button and see if it gets past the blue LED.

4
Beta / Re: Which LAN adapter would work with Beloader?
« on: 02:02 AM - 02/10/22 »
so i finally made it work with beloader and lan.

Can you explain how you did that? I just can not manage it. WiFi is not a problem. LAN just won't work. I have done everything strictly according to the instructions several times!

well there was one important thing which was not mentioned in the manual! lol
when everythign is connected, you have to press the beloader button so it starts to initiate the connection!
it starts with white LED, then goes to blue blinking. ( means its looking for lan connectikon )
then it ends with green LED which mean LAN connected

5
so i finally made it work with beloader and lan. however im having a very strange problem
whenever connect the the lan cable to the usb ethernet adapter, it kills my access points in the house.

i bought this which was recommended by  Xim central

https://www.amazon.de/dp/B00WT103J6/ref=pe_27091401_487024491_TE_item

I have 4 apple extreme routers in the house. 1 which is the main router, and the other 3 works as access points/extender.
those 3 simply dies, and gets no internet connection, as soon as i plug in the lan cable to the usb hub.

anyone else with this problem?

Definitely ask in the Beloader Forum about that.
The Beloader is spamming packets at a really high rate, maybe thats an issue for the Apple devices (firewall maybe)? Definitely ask the Beloader Guys, im sure they can help you with that.

thanx buddy!

today i played a bit more with this setup and i found out that if i take the whole setup and plug it in behind the ps5, then i dont have any issues on  my network at home.
so i guess i will keep this way.

however its a bit annoying/strange that i have bow down under the table and press the beloader button to initiate a connection everytime i want to have a gaming session. :(

it wasnt needed when i had beloader on wifi and connected behind the ps5.

6
Beta / Re: Which LAN adapter would work with Beloader?
« on: 03:09 PM - 02/08/22 »
so i finally made it work with beloader and lan. however im having a very strange problem
whenever connect the the lan cable to the usb ethernet adapter, it kills my access points in the house.

i bought this which was recommended by  Xim central

https://www.amazon.de/dp/B00WT103J6/ref=pe_27091401_487024491_TE_item

I have 4 apple extreme routers in the house. 1 which is the main router, and the other 3 works as access points/extender.
those 3 simply dies, and gets no internet connection, as soon as i plug in the lan cable to the usb hub.

anyone else with this problem?

7
so i finally made it work with beloader and lan. however im having a very strange problem
whenever connect the the lan cable to the usb ethernet adapter, it kills my access points in the house.

i bought this which was recommended by  Xim central

https://www.amazon.de/dp/B00WT103J6/ref=pe_27091401_487024491_TE_item

I have 4 apple extreme routers in the house. 1 which is the main router, and the other 3 works as access points/extender.
those 3 simply dies, and gets no internet connection, as soon as i plug in the lan cable to the usb hub.

anyone else with this problem?

8
Hahaha ffs!
So is this button needed to be pressed Everytime I want to game?

9
==========updated 01/14/22==========
just updated my Beloader software version to Firmware 20220103.2103, with ethernet-connection suppported. According to the developer, you need a RJ45 USB hub with RTL8152/8153 or SR9900 network chip.My hub is RTL8152B, it works great for me, brief update steps are as follows.
1.Press and hold the button on beloader, plug it into PC until you see the Beloader in “this PC”.
2.Use the new firmware .bin to replace the old one in Beloader.
3.(important)Plug Beloader to PC again, not holding the button, you will find Wifi setting file in Beloader, make sure the wifi account and password are filled with any characters(any characters are ok, like abc, whether right or wrong).
4.Connect Beloader, USB hub, xim apex, keyboard and mouse according to the connection diagram follows.

4.Plug Beloader to any 5V USB port(a 5V-2A or above USB charger would be better), press Beloader button, the blue light flashes for seconds, which means Beloader is connecting to local network, then turn to green light flashes for seconds, which means Beloader is executing remote play program, then green light stop flashing, it is working now. According to my experience, under LAN connection, the whole procedure is less than 3 seconds, while in wifi connection 5-6 seconds or longer.
Tips:
According to other players, using wired keyboard and mouse, especially those with RGB lighting, may result insufficient USB power, you may need external power cable connect to xim hub, so, a 2.4G wireless keyboard and wireless mouse is recommended.

==========updated 11/25/21==========
bought one yesterday on the Chinese eBay Taobao.com, there are 20 stocks for review in China.
Now the item was just shipped via S.F Express, supposed to deliver tomorrow night.
i will update the look and experience ince i receive it.

point number 5!
so i have to press the button on the beloader in order to initiate the LAN connection? dammit. lol it wasnt stated anywhere, nor on the beloader site or xim central youtube....

ive been fighting to make the LAN  method to work for hours! lol. well i guess i will try again tonight

10
Beta / Re: Which LAN adapter would work with Beloader?
« on: 01:31 AM - 02/07/22 »
morning guys, hope everyone is good and safe.
I need some advice on my situation. So im a ps5 + COD + Xim apex user. 
and recently also Beloader user.
up untill last week, ive been using the remote play trick to play  cod vanguard on ps5. it worked fine i guess, besides the hassle of the turning on the laptop etc.
Anyways, ive been using beloader, on wifi. my router is next to the beloader, and the beloader is plugged in behind the ps5. and the apex connected to the beloader, and my kbmouse and dual sense connected to the xim hub.

works fine, except that im having occasional disconnect. so i thought id try the power adapter method,.
I couldnt for the life me make this work connecting the beloader to a 5V3A adapter. i mean, nothign happens, remote play doesnt connect, and the dual sense just shows orange light, likts its charging only. ( btw in the ps5 setting the controller setting is set to BT,and i have also tried to change it to usb )
ive tried several adapter with the same result.

So, i decided to try the LAN method instead, i bought one of the usbc hubs whch xim central recommended from amazon. finally got it and
- updated the firmware ( double checked that the fw has updates by looking at the version number txt )
- connected everythign accordingly to the instruction and by plugging it behind the ps5.
- nothign happens.

PS5-> beloader - > USB HUB -> Xim adapter wih its hub > LAN cable

also tried with connecting to the power adapter, i got the same result as mentioned above.

so i gave up on it.

reverted back to the wifi fw, connected everything behind the ps5 and everything works.
however this time i disconnected the sony camera from behind the ps5 as well, and i have  2-3 hour cod session with my friends last night with no disconnect., So i was wondering if the sony camera caused the power drawing, ?

so do you guys think i should find a solution to the lan method, ? or should i just stick with the wifi, ?
thanx


11
Guys.
How do you bypass the reconnect issue in warzone Caldera with be loader/remote play?
Everytime I boot up the game  (ps5), after the first loading screen, screen foes black amd monitor signal goes out, and back and remote play /be loader disconnects.
Then I have to replug and I'm running again.
Jhappens only on warzone Caldera
Sorry but why u use beloader in ps4 games, xim support ps4 games...?

You are right. My friend.
It's because me and my mates we start by 1 round of plunder then we jump back to vanguard ps5. So I don't want to switch cables all the times

12
Guys.
How do you bypass the reconnect issue in warzone Caldera with be loader/remote play?
Everytime I boot up the game  (ps5), after the first loading screen, screen foes black amd monitor signal goes out, and back and remote play /be loader disconnects.
Then I have to replug and I'm running again.
Jhappens only on warzone Caldera

13
Beta / Re: Did you get the sample?
« on: 06:30 AM - 12/17/21 »
So my beloader came yesterday .

I watched multiple YouTube videos on how to get it up and running it just wouldn't work. At each step of the installation i got the green tick and success but once i plugged in my beloader into any usb socket be that a powered one  front/ back ps5 console no luck. On the beloader i would get a blue flashing light  then a green flashing light then red light then no lights what i tried

1 watching and reading  all available info
2 putting both my belaoder and ps5 console on the same wifi channel
3 renaming my 2.4 wifi channel and changing password
4 manually adding my info into beloader not using the beloader manager software
5 tried powered usb adapter and all ps5 usb ports

What worked for me i had an old PSN account i didn't use so i tried that with the beloader  i couldn't remember  the password for the account so i reset the account password .

 I reset the password from the page what opens when you add your info into beloader manager

I logged into my ps5 console with that account made sure it was working  and then added that account information into beloaders pc software and bloader connected straight away .

I then reset the password on my  PSN account i use on my ps5 console  i had a 12 digit password i changed that to 10 digit password and once i had the new password setup on my ps5 console i added that new info into beloader and it connected no problem  :)

Not sure if it helps anyone but it worked for me

valuable info! thanx

my beloader is still stuck at customs since december 3rd... due to millions of packages coming from china to  the country. lol

14
Beta / Re: Did you get the sample?
« on: 02:43 AM - 11/23/21 »
Looking at their video, I would not plug it in the back of the console if your Wifi router isn't in that direction.

why not?

well my ps5 is next to my apple router. so this should be ok.
i dont know why they recommend 2.4 ghz. i have 2.4 and 5 ghz wifi running.
should i just use 2.4?

I think you can use 5GHz if your router is close to the beloader when it is plugged in, because the differences between the two is that one provides faster speeds but over a smaller area. Meanwhile, 2.4GHz provides slower speeds but has a better reach. I think the Bealoder team said 2.4GHz due to the majority having their routers in the other room and so forth.

ok thanx! i will use the 5ghz then. beloader and router are 30 cm away7 from each other.with nothing in between

15
Beta / Re: Did you get the sample?
« on: 03:06 PM - 11/22/21 »
Looking at their video, I would not plug it in the back of the console if your Wifi router isn't in that direction.

why not?

well my ps5 is next to my apple router. so this should be ok.
i dont know why they recommend 2.4 ghz. i have 2.4 and 5 ghz wifi running.
should i just use 2.4?

Pages: [1] 2 3 ... 5