XIM Community

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - chimerajr

Pages: [1]
Game Support / Re: Destiny 1&2: Advanced Setups (20190801)
« on: 12:33 PM - 04/13/20 »
Hey RML. I know that you use the Sony Nav with your Config as do i, What's your solution to the double dodge not working all the time. I have the dodge assigned to one of my mouse buttons. sometimes it works when I double click it. At other times I have to click it a lot just to dodge.

I noticed RML runs his mouse at 1000hz polling but has the Apex set at only 500hz. I was wondering the reason for this.

All that matters is that your mouse polling rate exceeds your Xims polling rate. But never the other way around or youíll get stutter.

Bro this config is cheating omgg :)) nice job. İ use it with 12 k dpi is it right ??

All this time on my hands these days, I may revisit this.

Game Support / Re: Sony nav vs keyboard
« on: 10:46 PM - 01/05/20 »
I would say its easier to use than a keyboard.

Game Support / Re: InZane's MW Beta setup (Simple config)
« on: 01:43 PM - 09/23/19 »
why ADS 1.70


Iím not sure what Iím doing wrong, Iíve set all my settings to whatís in the OP, but there is so much pixel skipping no matter how much I lower or higher the ballistic curve. Itís unusable.

Does anyone have a video of how to set this up, I must be missing something. Or is this not specifically great for pixel tracking?

Iím trying it on Apex Legends.


Game Support / Re: Destiny 1&2: Advanced Setups (20190801)
« on: 11:30 AM - 09/01/19 »
cant wait for new settings. been using old setup with hip 4 and ads 3 and been loving it.  if u improve on it it will be amazing

I'm hoping to have some time later this week.

i have a question if someone can help. I have an issue with my apex playing destiny 2. i have a delay coming out of sprinting when i ADS, It doesn't happen a lot but enough to affect PVP play. I don't have any delay active on ADS

I'm pretty sure that's just a weird game mechanic and has nothing to do with XIM.

i have noticed that the issue only with NAV, when i use the KB I don't have the issue. I wonder if I increase the ads delay would that help. I will give that a try and see how that works. I want to that you for all your work with the xim, much appreciated

I don't play Apex Legends.  ;)

im looking for auto sprint on the NAV for destiny 2,

Thanks for being one of most helpful contributors in the community.

I was checking out your new curves and guidance though did not see you mention anything regarding  SAB. I could have missed it but do you have any suggestions on how SAB could impact the curve? Do you prefer SAB off?

I'm a couch gamer, so 90% of the time I use a NAV. I did some testing awhile back and I preferred SAB off. However, I'm no fan of strong Aim Assist. During my testing (which was limited), AA felt stronger with SAB active. The higher the value the worse it became.

My testing though was in regards to Fortnite and the issues people were having at the time with possible KB detection in game.

 Hey RML how do you make sprint automatic using the nav instead of clicking the thumbstick to activate it

Game Support / Re: Destiny 1&2: Advanced Setups (20190801)
« on: 12:02 PM - 08/25/19 »
i have a question if someone can help. I have an issue with my apex playing destiny 2. i have a delay coming out of sprinting when i ADS, It doesn't happen a lot but enough to affect PVP play. I don't have any delay active on ADS

Game Support / Re: Destiny 1&2: Advanced Setups (20190727)
« on: 04:10 PM - 08/01/19 »
 to make sprint automatic without pressing anything

Im using the nav also. My ? is how do you use the without clicking on the thunbstick. How can i make it automatic

Just so I understand, what are you trying to do? Make sprint automatic? So you are constantly sprinting? Or make it so you press the left stick in once to sprint then press it again to cancel sprinting?

Game Support / Re: Destiny 1&2: Advanced Setups (20190727)
« on: 10:11 AM - 07/31/19 »
Im using the nav also. My ? is how do you use the without clicking on the thunbstick. How can i make it automatic

You also might want to try C1 on ADS with Sync off.. Lol  :)

Will do that now. I just immediately went back to Default Sync with Curve 4 Hip and Sprint and Curve 3 ADS and that is most definitely the one. It's just beautiful. I can't thank you enough, it's the best this game has ever felt (and I've used Xim since Destiny 1). 

My personal take only, but I recommend everyone use Default Sync, Curve 4 with Hip and Sprint and Curve 3 with ADS. My sensitivity settings are: Hip 10 (Boost 500), ADS 6.25 (with Y/X 1.25) and Sprint 21.50. 12k DPI and 1000hz polling. It's magical.

Thanks for sharing chris. Have just finished an evening of comp and can say i prefer sync off to sync default. I orefer less aim assist.

Really enjoyed this from rml

12000 dpi
Sync Off
HIP - 84 + C4
ADS - 56 + Y/X 1.25 + C3
Sprint - 200 + C4
Sparrow - 200 + C4

I use nav, my tip would be dont forget to strafe left and right to proc aim assist. I find left stick movement as important as mouse and conciously remind myself to adjusy using the left stick.

As for the new curves, they definately cut through AA very well and removing boost provides a more stable and predictable experience.


Interesting! Definitely with you on your curve setup, they're beaut. The margins of difference I'm talking between Sync Off and Default are tiny, so I can totally see why it comes down to personal preference. It wasn't like Sync Off felt unusable, it just didn't feel like 'home' compared to Default. Just when flicking the crosshairs very quickly to a new target, Off Sync felt a little more unpredictable when it came to slowing the mouse after a flick and positioning for the follow up shot. Default just felt like I would flick to an enemy's head and when I stopped moving my mouse, the crosshair stopped moving instantly and my second shot was already lined up.

There's probably even more refinement I can do, trying out curves 1 and 2 and dialling in sensitivity and boost but it just feels so perfect to me that I'm not too fussed about going even more meta.


Game Support / Re: Destiny 1&2: Advanced Setups (20190706)
« on: 06:24 AM - 07/21/19 »
 how do you do a 180į flick

Full config code gives you my entire setup, sensitivities, button layout, curves, Hip, ads, Sprint and Sparrow configs.

Game Support / Re: Destiny 1&2: Advanced Setups (20190706)
« on: 08:26 AM - 07/19/19 »
Hey RML im a new user. I have a question, what is the purpose of the full config code and where do i use it

So, why try an advanced setup? Here are some of the benefits you will enjoy with my Destiny setups that you don't have with a basic STís. This isn't any fault of XIM. Destiny games just has a lower then normal turn speed cap and an insane amount of Aim Assist.

- Faster movement and more responsive controls while Running.
- Faster movement and more responsive controls while riding Sparrow.
- More responsive character movement and better managed Aim Assist.
- Ballistic curves to help with turning and combating AA.

Destiny Full Setup:
You must use Beta Firmware/Manager 20190702 with this setup, Link -   https://community.xim.tech/index.php?topic=79166.0
In game sensitivity should be maxed at 10
12000 DPI
G502 Polling is set to 1000
APEX 500hz.
SYNC Default

Destiny Full config code:
Code: [Select]
    >>> XIM APEX [RML Destiny ] START COPY >>>

Sens 12
Code: [Select]
  >>> XIM APEX [Translate Ballistics] START COPY >>>

Sens 7
Code: [Select]
   >>> XIM APEX [Translate Ballistics] START COPY >>>

Sens 26.5
Code: [Select]
    >>> XIM APEX [Translate Ballistics] START COPY >>>

Sens 40


Destiny 2 Full Setup
You must use Beta Firmware/Manager 20190702 with this setup, Link -   https://community.xim.tech/index.php?topic=79166.0
In game sensitivity should be maxed at 10
12000 DPI
G502 Polling is set to 1000
APEX 500hz.
SYNC Default

HIP - 11.5 (AA curve active)
ADS - 8 (AAA Curve active)
SPRINT - 26 (AA/Turning curve active)

Destiny 2 full config
Code: [Select]
   >>> XIM APEX [RML Destiny 2 ] START COPY >>>

How to use these setups like a champ!

Step One: ADS and overcoming the massive Aim Assist in this game.
- 2nd set your ADS sensitivity to a comfortable setting to you.
- 3rd if Aim Assist is too strong use the curve Iíve included with this setup or try one from this new set of curves Iíve created.
Code: [Select]
        >>> XIM APEX [Anti Aim Assist 2] START COPY >>>

Step Two: Sprint
- Use a separate config for Sprint.
- Assign an activation key to it.
- Add sensitivity until turning feels comfortable to you. For me this is typically about 2.5x my Hip sensitivity. Also make sure youíre using the Hip Translator (which it should by default).
- I suggest using Hold behavior instead of Toggle for the Sprint config (which it does by default). Thereís a couple of reasons I do this. It creates less confusion about what config is active and also the game likes to suddenly stop sprinting sometimes and suddenly youíll be turning at insane speeds. This also occurs when jumping. So train yourself to hold the button while sprinting and releasing when you stop or jump.
- Use an activation Delay for Sprint. I use 250ms. This is used to avoid jitter when activating your Sprint config.

Step Three: Sparrow
- As with Sprint, you should use a separate config with Sparrow as well.
- Assign it an activation key.
- Set this config to Toggle mode.
- Use Hip Translator (does by default).
- Raise sensitivity until movement speed is sufficient, typically 3x Hip sensitivity.
- I suggest using Turn Assist with the Sparrow. Assign it to an easy to access button. I assign Turn Assist to Right Click.
- Use Reload as a Deactivation key for this config. Then ONLY use Reload to unmount the Sparrow. The reload key will then deactivate the Sparrow config and simultaneously dismount the Sparrow, putting you on foot and in the Hip config.
- If your mouse has macros you can create one that will Summon, mount and activate the Sparrow config with a single button press. When I played ALOT of Destiny thatís what I did. Now I just activate the Sparrow config after mounting it manually, itís a 3 button press action but rather easy and intuitive once you get used to it.


Im having the problem with Destiny 2, I have tried to bind them to Mouse and keyboard with no luck

Pages: [1]