XIM Community

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - PcSkeng

Pages: [1] 2 3 ... 48
1
Good tip on the surface tuning hadn't a clue that was possible. This thread got me to dig out the 600 out of the cupboard forgot how good it is  8)

Youíre welcome from me and the guys who told us about the surface tuning :D

The only thing which was an issue for the first day was, coming from the G502 which is considered ď heavy ď by the mouse community ( it really isníT, it feels great )  is the mouse felt cheap😂 ( the Rival 600 ) I guess itís jusy how gaming mice are built when made for the most precision, which in my opinion is unnecessary because calling something of 120-30grams heavy is just @#$% lol.

The buttons on the G502 are most definitely better, the feeling, the placement and sounds of the clicks are just better, maybe itís just my mouse but as I said before it was only a issue for a day or so, I do prefer the buttons on the G502. Also pretty much all other reviewers have said the same thing.

The mouse is  great though, the buttons on the G502 were annoying at first but itís just going to take a second to get used to on the Rival 600 as was the same for the G502.

All these issues will most likely be fixed because I play with my mouse pad on my lap as Iíve always been a TV gamer, Iím going to buy a desk today or tomorrow ( soon. Lol ) just hope that isnít to hard to get used to and doesnít take to long. After that Iím sure everything is going to feel perfect.

I seem to be having a easier time tracking with this mouse, when I get onlitn Iím going to play one game and see if I have the sticky aim assist issue with the G502 because it could all be in my head. It does feel like this mouse has fixed it, now I just need to perfect my ADS sensitivity.

2
To tune it you hold the DPI button until the mouse starts flashing at you and then you move it around on the mouse pad until it stops flashing.

Thanks.

I donít understand why they donít advertise this feature more and I couldnít find a tutorial / any instructions online on how to do this.

3
General Discussion / Re: Ops 4 Positive Opinion
« on: Today at 06:18 AM »
I replied to this on the ď BO4 worth it? ď thread.


4
XIM APEX Discussions / Re: BO4 Worth It?
« on: Today at 06:01 AM »
It's definitely worth it. Don't listen to the salty cry babies that bought the Xim and thought it would make them a God at every single shooter. It takes a little tweaking but you can create some insane settings and dominate the competition. I managed to find some sick settings that literally feels like I'm using an aimbot. They're so accurate I climb from a 1.38 level 16 to a 2.34 level 42. If you want it buy it. Just be patient, focused and test a bunch of different settings until something clicks and you find what you were looking for.

Boy you have a 2kd, watch your mouth... Thatís the BO2 / AW / Ghosts side of me btw

I was getting some pre game practice in on custom games, picked up my controller because when I watch killcams nobody has any issues aiming, it looks like people can just sit still and have aimbot (WHICH IS HOW THIS GAME WORKS)

Iíve actually found, on BO4 (IMO) itís easier to aim on controller🤣

I didnít change my sensitivity and my aim was literally percfect. I can admit it was off at times but I could easily snap onto my target, this just comes from playing max sensitivity Ďall my lifeí on shooters. Movement was also natural to me.

I was playing against bots but I KNOW, if I spent a day or 2 just using a controlle, Iíd play as good if not better than I do with XIM.

Thereís just less recoil management it feels like on bo4 ( with controller )  and being a high sens player ( with Xim also ) kinda counters that unless I decrease my ads, which feels weird if I do ).

I would happily do this but even after like 10mins my hands hands started hurting and Iím not about to go though all that again just to play with a controller..

Not everyone who has an opinion that is the opposite of yours on this thread are ď salty crybabies who bought Xim and thought it would make them a god ď

Some of us are naturally good at shooters, have our own reasons for buying Xim and have our opinions on the game. Most of us also heavily agree with each other and based off of what ( based on what... for you American guys ) youíve told me, we are on a higher skill level than you ( without that sounding rude )

Back to the topic off this thread.

The game has just released, its messy right now, as fun as quads on Blackout is, even Blackout has a lot of issues.

The multiplayer is the worst multiplayer Treyarch have made but it can be fun and with a few nerfs, patches and fixes, it will most likely be enjoyable for more than 5 games.

Like Iíve said, I would highly recommend the game AS A WHOLE GAME but if you want to strictly play multiplayer, you might have some mental issues after a few days.




5
Okay so like the post says. I feel I could get a little more with tweaking some settings or should I just leave it how it is. This is my first ever settings post.

M: Logitech 502 @12000 DPI and 1000hz
K: Razer Deathstalker
C: Stock Xbox Controller

Game Settings
Look H: 14
Look V: 14
Target Assist: On

Xim Settings

Hip: 28.00
Synch: off
Smoothing: 0
X/Y: 1.00
No Ballistic Curve

ADS: 21.00
Synch: off
Smoothing: 0
X/Y: 1.00
No Ballisc Curve
ADS Delay: 360

I like the feel. Just looking for a little more sticky AA but not much. I know it might be a lame setup but it works for me. Iím just looking for a lil extra.

Pleas try it and let me know what you think.

Iím not going to try them as Iím fine with my settings and 28 HIP with no sync just sounds ridiculous to someone who plays on Sync off but with a 78 hip lol.

If you want stronger aim assist, turn on Common Sync for your ADS *NOT HIP* and make your ADS sensitivity  - 1.31

6
I play with Nav.

Have a subconfig for vehicles, get into the vehicle the sub-config kicks-in Nav stick turns into the Right thumbstick. Get out exits vehicle subconfig to HIP.

No need to pickup the controller.

Wait what, how?

7
XIM APEX Discussions / Re: Bo4 spectators reporting
« on: Today at 03:58 AM »
With the spectating feature in blackout people can tell your not using a controller and last night I had a message from someone I killed saying he's reported me. Is this something I should worry about as I'd rather go back to using a controller than get my account banded ext?

No.

Sony licence their own Keypad and Mouse.

Mictosoft have announced theyíre bringing Mouse and Keyboard support to Xbox  with Razer.

8
Wait Iím confused, do you want faster ADS or slower ADS?

If you want slower, go 28.32

I need faster ADS!! 😃


You canít faster ADS? Jheeze lol.
Try 47.2

9
Wait Iím confused, do you want faster ADS or slower ADS?

If you want slower, go 28.32

10
General Discussion / Re: Curves Library
« on: 02:17 PM - 10/19/18 »
Yes itís worth it, always tune your mouse if you have the option to

11
Im running this set up and it to slow. not sure what im doing wrong?

You probably have the wrong DPI and Sync

12
hello PcSkeng,

sorry for my bad english, iīm from Germany.

Your config is the best ever! Thankīs very much for that  ;D

Now i have a question:

how can i get the ADS faster? The aiming is to slow for me. But i need the AA, without i have no chance to handle with the aim.


I have tried the ADS sensitivity make higher, but it doesnīt work. i have also tried 70, 80 or 100. but there is no change.

Can you help me please? what a config change i have to do, in order to the ADS is faster?


I would please me, when i get an answer!

Also, have you got the curves on both ads and hip?

If you havenít, copy and paste the full curve below into the ballistic editor on ADS, I use it on both but Iím going to try the setup without the curve on HIP

13
hello PcSkeng,

sorry for my bad english, iīm from Germany.

Your config is the best ever! Thankīs very much for that  ;D

Now i have a question:

how can i get the ADS faster? The aiming is to slow for me. But i need the AA, without i have no chance to handle with the aim.


I have tried the ADS sensitivity make higher, but it doesnīt work. i have also tried 70, 80 or 100. but there is no change.

Can you help me please? what a config change i have to do, in order to the ADS is faster?


I would please me, when i get an answer!

Thanks!

What mouse + DPI are you using?

14
Does the Rival 600 have surface tuning?

I thought it did before it canít but I donít think it does.

Couldnít find it.

You need to hold the DPI button to.do surface tuning..

Also, what lift of distance do you use / recommend?

15
Does the Rival 600 have surface tuning?

I thought it did before it canít but I donít think it does.

Couldnít find it.

You need to hold the DPI button to.do surface tuning..

Could you explain this a little more please.

Do you just hold it down and leave it or is it more like the Logitech tuning?

When I hold it, it just blinks and then...... lol

Pages: [1] 2 3 ... 48