XIM Community

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Kaidozan

Pages: [1]
1
Game Support / Re: Post your Overwatch Settings
« on: 04:48 AM - 02/06/18 »
@Joeyknock0
Quote
Logitech 502 with 12,000dpi
1000hz polling rate

XIM SETTINGS:

HIP sense 8.00
Ballistic curve is Henry’s curve


The thing with Henry curve is that you xim4 is never going to flash red when you turn. But this means that his curve feels really slow compared to other curves or standard profile.

I'm using a different curve right now and i can make quick scopes and follow genji's dancing on my head. It feels more natural, but everyone has a different pov.

X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAoUHigyPEZQWmRobHB0eHyAhIiM:X4MB

Boost 1250

I'm playing with 6 and cAPER's curve, I've seen this Henry's curve everywhere and now I wonder, it's really good? I mean so far the cAPERšs curve allowed me to do fast turns without messing around with my tracking and it doesn't need the boost. I will give it try tonight.

8 sens @12000DPI seems insane IMO

2
Game Support / Re: Post your Overwatch Settings
« on: 12:04 PM - 01/01/18 »
I was using lineair but after some day it just felt weird.

I tried expo as a test and i liked it really much for the turning. But for tracking it still feels a bit odd sometimes.

Atm i am playing expo with a [email protected] 12000dpi. Xim sens 26hip 22ads. I tried to play at 800 dpi and higher but this feels much smoother. Almost got to top500 on xbone.

I'm still testing but i might switch to 3600dpi again if the dpi is too fast to track.

3
Hello!

I've been trying your curve but i seem to be a little confused. I've been playing with a lineair curve for a while but it my aim felt to "heavy" like aiming with a stone on your hand. Now i am playing with expo standard ow profile. This is noobish but the only thing i have to do is add your curve to my profile and play with sensitivity's and it should work? Playing with 4000dpi, 1000poll, expo AAW 5/6, AAS 100. My xim is still blinking red when i make a quick move. Am i doing something wrong or do you recommend me a other curve/thread? Have a nice day.

4
Game Support / Re: OVERWATCH Linear Fix
« on: 05:26 PM - 08/04/17 »
All right, it seems like it's fixed. I change the mouse pad options to standard settings and it fixed the strange lag.

5
Game Support / Re: OVERWATCH Linear Fix
« on: 03:11 PM - 08/04/17 »
https://youtu.be/HO0ME69iLmQ

Watch my video, quality is sh!t but I hope it's enough to see my problem.

6
Game Support / Re: OVERWATCH Linear Fix
« on: 03:36 PM - 08/03/17 »
Tomorrow I will try to upload some footage of the problem I am having.

It seems like when I aim up to the sky and go left right it gets so laggy..

Not sure what it is yet.

7
Game Support / Re: OVERWATCH Linear Fix
« on: 02:35 PM - 08/03/17 »
Everyone i know that uses a xim thats top 500 using exp with no curve including myself. All of you guys that keep messing with your sensitivity every week and using a new curve every week are just @#$% up. Theres no god curve or perfect sensitivity. Have you ever wondered why ppl outgun you? its because they stick to one sensitivity and get muscle memory. Im sorry if im coming out rude its just that you guys need to stick to one sensitivity and start building that muscle memory thats how your gonna improve. ive been using the same mouse dpi and sens since the game came out and thats how im able to be so consistent and get top 100 every season. Trust me guys. Just stick to one sensitivity and start building that muscle memory! :)

I wish it was that easy. Once you go linear you don't want anything else.
For me it comes most close to PC gaming.



START PASTE >>>
X4C: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:X4C
<<< XIM4 END PASTE


That's my config using linear. I'm sitting at 3900 right meow. To me this feels the best it was one of the first curves put out there just the standard 12.0 one, give it a try.

4000 dpi
100 aim assist
75 window
O smoothing
Good luck

Hello, thanks for your help but that curve is not working for me. It seems very long, when I try to paste it it won't work.

8
Game Support / Re: OVERWATCH Linear Fix
« on: 07:01 AM - 08/03/17 »
Everyone i know that uses a xim thats top 500 using exp with no curve including myself. All of you guys that keep messing with your sensitivity every week and using a new curve every week are just @#$% up. Theres no god curve or perfect sensitivity. Have you ever wondered why ppl outgun you? its because they stick to one sensitivity and get muscle memory. Im sorry if im coming out rude its just that you guys need to stick to one sensitivity and start building that muscle memory thats how your gonna improve. ive been using the same mouse dpi and sens since the game came out and thats how im able to be so consistent and get top 100 every season. Trust me guys. Just stick to one sensitivity and start building that muscle memory! :)

I wish it was that easy. Once you go linear you don't want anything else.
For me it comes most close to PC gaming.

9
Game Support / Re: OVERWATCH Linear Fix
« on: 05:58 AM - 08/03/17 »
Hello thanks for the support.

I've been using the xim4 for a few weeks now and in the beginning I was enjoying myself.
It was working very well and I was starting to get used to it.


But now (probably) after the latest OW update my aim is messed up. It feels really laggy and jittery. Sometimes it just hangs on some point so I can't move for a second.

The xim4 is not changing in color and not blinking.

I am using hoodlum's second curve but with 1500 boost. Otherwise my xim4 wouldn't see my small mouse movements..

My setup:
Mouse: G502 ( started with 12000 doing, changed to 8000 with increased sens but that didn't work out either.)
Keyboard: Logitech G410
Curve: hoodlum's
Boost:1500
Xim4 sens: It was 16,5 as hoodlum's advised but I thought the lag was gone when I was playing with 40 and lowered DPI. But in the end it was still jittery.

I tried changing to expo but that didn't work either. Can somebody give me some tips?

I am using the CCC for lineair ramp.



Are you on Xbox or PS4? I was having trouble getting hoodlums curve to feel good but I play on Xbox pretty sure it runs better on ps4.

I am playing on the Xbox one. I don't know what happend it was working very well.

10
Game Support / Re: OVERWATCH Linear Fix
« on: 03:55 AM - 08/03/17 »
Hello thanks for the support.

I've been using the xim4 for a few weeks now and in the beginning I was enjoying myself.
It was working very well and I was starting to get used to it.


But now (probably) after the latest OW update my aim is messed up. It feels really laggy and jittery. Sometimes it just hangs on some point so I can't move for a second.

The xim4 is not changing in color and not blinking.

I am using hoodlum's second curve but with 1500 boost. Otherwise my xim4 wouldn't see my small mouse movements..

My setup:
Mouse: G502 ( started with 12000 doing, changed to 8000 with increased sens but that didn't work out either.)
Keyboard: Logitech G410
Curve: hoodlum's
Boost:1500
Xim4 sens: It was 16,5 as hoodlum's advised but I thought the lag was gone when I was playing with 40 and lowered DPI. But in the end it was still jittery.

I tried changing to expo but that didn't work either. Can somebody give me some tips?

I am using the CCC for lineair ramp.

Pages: [1]