XIM Community

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - hditano

Pages: [1] 2
1
Game Support / Re: Post your Overwatch Settings
« on: 04:52 PM - 08/30/17 »
Mist, I would wait on retraining that ST: https://us.battle.net/forums/en/overwatch/topic/20758857079?page=4#post-74

Do you encounter any changes on linear ramp st?

I do feel like there is a slight difference, even on Linear. Something feels off compared to before.

hopefull blizzard resolve this problem asap

The hotfix was released this morning and now I'm sure the problems yesterday affected Linear Ramp as well.

Today, Linear Ramp feels as normal as it did before. Yesterday it was feeling all floaty and jittery.

Is it server side the hot fix? Since I didn't get any download for. It

2
Am I the only one perfectly fine with the new settings? Feels pretty good to me, havent done any extensive testing but 180s with genji feel really smooth and fast.

PS4
1000 polling
12k dpi
Console Controller Crossover
3500 boost
Linear aim
X/Y Ratio 1.51
Varying sensitivities ranging from 10-15
25 AW, 100 AA

Are you using any curve?

3
Game Support / Re: OVERWATCH Linear Fix
« on: 06:14 PM - 08/29/17 »
Since this new option is for linear (aim ease) do you guys set it at 0?

4
Game Support / Re: OVERWATCH Linear Fix
« on: 11:41 PM - 08/27/17 »
I'm shocked to learn that a lot of you use small amounts of aim assist/windows... I have always used 100% AA and 100% AW; when I kept seeing people using little to none I've been trying out lower values, from 0 to 85 I cannot seem to feel comfortable with the lack of AA. I am confused... Isn't the training from the Xim ST (expo) supposed to be trained to work with the aim assist to negate it, or am I mistaken?


Either way, I will spend some more time trying to train myself to use little or no aim assist with this coming comp offseason but the way the last two weeks of trying that have gone I don't see me making that change. I main DPS/Defense characters and my hitscan character accuracy is pretty incredible - 50 to 60% with soldier/McCree. I don't see a reason to make these changes.

As you said. Expo and a high aim window is the way to go. You can have  really nice weapon accuracy when using it properly.

5
Game Support / Re: Overwatch Widowmaker
« on: 05:26 PM - 08/25/17 »
Can you apply this settings for hanzo? Tbh I tried everything but it seems to be the hardest one to setup

6
Game Support / Re: Post your Overwatch Settings
« on: 05:01 PM - 08/25/17 »
Does anyone have any good settings for hanzo? It seems to be one of the hardest one to setup properly.

7
Game Support / Re: Overwatch Widowmaker
« on: 08:43 AM - 08/21/17 »
ive been top 100 every season since season 1 and use the basic translator with 12k dpi / 7Hip / 3ads

The way to get better is to keep playing and develop muscle memory simple as that :)

Ill @#$% on anyone thats playing widow on linear lol

I feel like this is why most xim users are under master is because they keep messing with there settings tbh

What about window size ? It seems the only setting
That's different on top 500 players.thx

8
Game Support / Re: OVERWATCH Linear Fix
« on: 05:00 AM - 08/18/17 »
each curve seems to only work for a handful of people.

I am trying this out right now, but it seems that small movements don't pick up readily... I am assuming this is a deadzone issue.

If it's Linear that you want to test there is only one curve, the curve that works around the dead zone problem. It looks like this:


Or as alternative option you do not use that curve and instead apply Boost to work around dead zone problem.

All the other up and down, mountain range types of curves are experiments of individual players that do not maintain close to linear acceleration as you move the mouse from slow to fast.

It's the mountain curve meta Humanfemale, it will pass eventually.  :P

BODiiES, first at all I really like your settings (the one you got on your signature) you still using them?
Any reason why are you using 500h instead 1000hz km the polling rate? Or just hardware limitations? Thx!

9
Game Support / Re: OVERWATCH Linear Fix
« on: 04:18 AM - 08/17/17 »
I'm confused how to convert Bully's curve to PS4 numbers. Can anyone explain it clearly?
Ok so the numbers on the Left are the Xbox Curve - The second are the 8.0 PS4 curve and the Third is 8.5 PS4 curve
XBOX    PS4   PS4 8.0
12            8.5            8
14           10.5           10
16.5           13           12.5
19.5           16           15.5
23.5           20           19.5
29.5           26           25.5
41.5           38           37.5
60.5           57           56.5
79.5         76           75.5 - x13

I'm not going to plug those numbers in for you but there you go
(totally didn't mean to round all those numbers, just kinda ended up that way)

Bully do you play mcree tracer soldier on those settings too?
I mean the one that is posted with pics a few posts above.
Thx

10
Game Support / Re: OVERWATCH Linear Fix
« on: 10:48 AM - 08/16/17 »
Has anyone found widow settings when using linear? Still Traver genji and widow on expo

11
Game Support / Re: Post your Overwatch Settings
« on: 06:04 AM - 08/16/17 »
Does anyone have a good hitscan settings (mcree soldier etc) it seems to be super inconsistent on my own. For sure. Tried linear and didn't liked it. It feels weird and floaty. So if you guys have any expo settings I'll appreciate it.

What settings did you use for Linear Ramp?

Which curve?

Did you run the official Overwatch ST or Console Controller Crossover ST?

Tried the one on the linear fix ramp thread (first page) plus the one posted by hoodlum. Any advice.? It seems than for. Hitscan heros linear ramp is the way to go.

It shouldn't feel weird and floaty. Makes me think that something may have been wrong with the way you set it up? It can be confusing at first.

The one on the first page that you used, did it start at 8 or 12? You want to make sure you use the right one for your console (8 for PS4 and 12 for Xbox One).
 
Also, are you running just the regular firmware for XIM4? Some people run the experimental firmwares which can sometimes cause problems with Linear Ramp and curves.

Started the curve at 12 (xbox) running  latest stable fw (gold). So you recommend linear or expo for hitscan heroes? Thx!

12
Game Support / Re: Post your Overwatch Settings
« on: 05:33 AM - 08/16/17 »
Does anyone have a good hitscan settings (mcree soldier etc) it seems to be super inconsistent on my own. For sure. Tried linear and didn't liked it. It feels weird and floaty. So if you guys have any expo settings I'll appreciate it.

What settings did you use for Linear Ramp?

Which curve?

Did you run the official Overwatch ST or Console Controller Crossover ST?

Tried the one on the linear fix ramp thread (first page) plus the one posted by hoodlum. Any advice.? It seems than for. Hitscan heros linear ramp is the way to go.

13
Game Support / Re: Post your Overwatch Settings
« on: 10:01 PM - 08/15/17 »
Does anyone have a good hitscan settings (mcree soldier etc) it seems to be super inconsistent on my own. For sure. Tried linear and didn't liked it. It feels weird and floaty. So if you guys have any expo settings I'll appreciate it.

14
Game Support / Re: OVERWATCH Linear Fix
« on: 04:30 PM - 08/14/17 »
XBOX USERS:
Sorry I don't know exactly who's curve this is but though I've found a setting I really like, I like to try other people's curves.
I came across this one today and spent a few hours adjusting. It was a little quick for me and slow at the ends but I liked how it felt. Then I tried slightly dampering the slow end and I think I found a sweet spot. The key is not to turn too fast. The moment you turn faster than OW's internal turn limit you'll feel like it's off. Try taking this to a higher sens then you might feel comfortable and mess around, it's pretty nice.

One other note: I've been helping quiet a few people and I've noticed that a lot of you still use Aim Assist. Whatever that's your deal but that is a BIG reason why you can't turn fast. I have a whole other post about max turn speeds but that aim assist, even at a 1 window, is extremely slowing.

I know you'll miss a few shots at first, especially with Widow and McCree but trust me, you'll get it. I'm still top 1% accuracy with Widow and I think top 5 with Soldier and McCree with 0 Aim Assist. Again just my 2 cents


TL;DR This is a nice setting for high sens and little wrist movements (small mouse pads maybe?)

>>> XIM4 [**OVERWATCH* 35.00 SENS] START PASTE >>>
X4C:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAAALgAqACoATwBWAEUAUgBXAEEAVABDAEgAKgAgADMANQAuADAAMAAgAFMARQBOAFMAAAYBAQAAAAAAABoANAAuADAAMAAuADIAMAAxADYAMAA0ADAANQAAAAYASABpAHAAAAAAAAAAAAAAAAAAAA2sAJYAAAAAAAAAAAAYHCEnLztTeZ+fn5+fn5+fn5+fn59jBGAQYIBiQAAAAAAAAAAAAAAdTABAAaAQgEBiEEAIQBBAAoEggQFABIABgAKACIAEgRCBBAAAAAAAAKAEoAgAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAABoANAAuADAAMAAuADIAMAAxADYAMAA0ADAANQAAAAoAVwBoAGUAZQBsgAEAAAAAAAAAAAAAAAATiABkE4iAAQAAAAABGCApMjtETFVeZ3B4gYqTnKSttr/IYwRgEGCAYkAAAAAAAAAAAAAAHUwAQAGgEIBAYhBAEEAIQAKBIIEBQASAAYACgAiABIEQgQQAAAAAAACgBKAIAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAaADQALgAwADAALgAyADAAMQA2ADAANAAwADX/////AAAAArwAAAAAAAAAAAEDIABkAAAAAAABAAAAAAQJDhMXHCEmKi80OT1CR0xQVVpfAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAaADQALgAwADAALgAyADAAMQA2ADAANAAwADX/////AAAAAAAAAAAAAAAAAAAPoABkAAAAAAAAAAAAAAoUHigyPEZQWmRueIKMlqCqtL7IYwRgEAAAYkAAAIACAACAAQAAHUwBQAGgEIBAgAJACEAQQAKBIIEBQARiEIABgAgAAIEQgQQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAKAIAAAAAAAAAAAAAAAaADQALgAwADAALgAyADAAMQA2ADAANAAwADX/////AAAAAAAAAAAAAAAAAAAPoABkAAAAAAAAAAAAAAoUHigyPEZQWmRueIKMlqCqtL7IYwRgEAAAYkAAAAAAAAAAAAAAHUwAQAEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAgAgAAIEQgQQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACAAaAIAAAAAAAAAAAAAAAaADQALgAwADAALgAyADAAMQA2ADAANAAwADUAAAAGAEEAZABzoBAAASwAAAAAAAAAAAAEsACWAAAAAAAAAAAAGBwhJy87U3mfn5+fn5+fn5+fn5+fYwRgEGCAYkAAAAAAAAAAAAAAHUwAQAGgEIBAYhBACEAQAACBIIEBQAQAAAAAAAAAAIEQgQQAAAAAAACgBKAIAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=:X4C
<<< XIM4 END PASTE <<<

JUST CURVE: >>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1GBwhJy87U3mfn5+fn5+fn5+fn5+f:X4MB
<<< XIM4 END PASTE <<<

See Equipment in Sig below

Whats this wheel thing on the second page ? It should be ADS?. What about dpi?thx

15
Anyone got any updates on widow config??
Thx

Pages: [1] 2
Admin