XIM Community

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Kitten_Hearts

Pages: [1] 2
1
Game Support / Re: OVERWATCH Linear Fix
« on: 10:57 AM - 08/31/17 »
Does everyone use aim assist? If so, why? PC does not have aim assist, and it's pretty much considered hacking by them. The whole point of the XIM is to try to emulate PC, not emulate PC with aim hacks. It makes a huge difference, as my accuracy percentage literally drops by half if I turn aim assist from 100 to 0.

If anyone plays on both PC and console with the XIM, does it feel like a massive advantage with the XIM with aim assist vs PC?

I play both and aim assist makes things MASSIVELY easier.

2
Game Support / Re: OVERWATCH Linear Fix
« on: 08:24 AM - 08/24/17 »
My biggest issue right now at this point is bouncing back and fourth between the two. My settings feel really quite terrible after I've been playing on pc. All I want is to be able to bounce between the two versions of the game without throwing my muscle memory out the window. >:(

3
Game Support / Re: OVERWATCH Linear Fix
« on: 07:54 PM - 08/16/17 »
Hey bully what do you use for pc settings?

4
Hi guys,

I recently made the jump to pc for Overwatch to play with another group of friends and I'm wondering what would be the best recommended settings to use with the xim on ps4 so it doesn't feel to bonkers when I switch between both versions?

Right now I'm really digging linear but it doesn't really feel the same.

5
Game Support / Re: OVERWATCH Linear Fix
« on: 11:22 AM - 07/21/17 »
I played a few hours last night. It felt really good, I was still able to turn with that linear feel to it so that was important, but that window pull with the  window was rough. I'll try again with it at 7 tonight when I get free from work.

6
Game Support / Re: Post your Overwatch Settings
« on: 11:19 AM - 07/21/17 »
I tried linear last night with the +12 curve... it definitely feels more like PC. However, the turn speed and occasional weird diagonal movement had me going back to exponential. Now I'm all screwed up in the head over which to use.

Join the club. I like the higher turn speed of expo when playing tracer, but my aim is off more often than not, hopefully they fix linear.

Honestly you can just get away with two or maybe 3 profiles. If your using anymore chances are your looking way to into it.

7
psn: Kitten_Hearts

Canada- Alberta

Overwatch

8
Game Support / Re: OVERWATCH Linear Fix
« on: 11:33 PM - 07/20/17 »
You were right it wasn't linear anymore.
At first it looked fine and worked well but after many hours of playing I felt I should come up with "normal" things again., so I changed my settings again and I came up with this :



>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1DBciLThDTllkb3qEj5qkr7rEyKF6:X4MB
<<< XIM4 END PASTE <<<

I like the feeling to this one best so far. I'm curious what are you running for AA and window? More so for widow and soldier?

9
Game Support / Re: OVERWATCH Linear Fix
« on: 02:01 PM - 06/27/17 »
So figured I would put my settings up.  Linear felt really good, but turn speeds were a little lacking so I found several curves without boost that felt a little better for tracking.  Anyways, on to the good stuff.  Here is my setup and I hope some of you find it helpful. 

PLAYER EXPERIENCE
Top 500 Season 4:  Soldier/Zarya main
Current Season High:  4414 (not top 500 yet since I only have about 30 games in so far, but I am def in range for it again this season)
Favorite Heroes:  Tracer, Soldier, Zarya, Lucio

HARDWARE
SYSTEM:  PS4 Pro
MOUSE:  Logitech G502
MOUSEPAD:  Artisan Mid
KEYBOARD:  Corsair Strafe Stealth

IN GAME SETTINGS
AA - 100 (with linear it feels better to leave at max even for pharrah, but i don't play her a lot so you may want to mess around with AA for her and lucio)
Aim Smoothing - 0
AA Window 25
SENS - 100 for both
RAMP - Linear

XIM SETTINGS
FIRMWARE - SA03
ST - Console Controller Crossover
MOUSE DPI - 12k/1000hz polling no angle snapping
SENS - 9.5
BOOST - 0
STEADY AIM - Off
Y/X RATIO - 1.5

AND HERE ARE MY CURVES

I really didn't like the way boost cut off the beginning of the curve so I found some curves that have proven to work for me without boost.  I am posting all 3 since personal preference may differ.  Also remember to adjust sens to your liking since your mousepad/mouse may provide different results.

**MY SENS**
CURVE 1 SENS:  9.5
CURVE 2 SENS:  16.5
CURVE 3 SENS:  12

All curves use the same settings posted above.  The only thing that differs is the sens.


****CURVE 1****

>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1ESpDXHV9hY2VnZ2dnZ2enp6enp6f:X4MB
<<< XIM4 END PASTE <<<

http://imgur.com/a/hRl38

I have played around with linear quite i bit and this feels the best to me.  Great turn speed and precise accuracy with small mouse movements.


****CURVE 2****

>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1ERslLzlDTVdha3V/iZOdnZ2dnZ2d:X4MB
<<< XIM4 END PASTE <<<

http://imgur.com/a/6TQIY

I have shared settings with a few friends of mine and a couple (mind you this is at GM level) have said they really like the feel of this one.  It is the standard 8.5 curve with max turn speed cutoff.


****CURVE 3****

>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1ESI0RVdoeoudnZ2dnZ2enp6enp6f:X4MB
<<< XIM4 END PASTE <<<

http://imgur.com/a/ibwnM

This curve, at first, felt really good but with my setup pulled slightly when trying to track.  In theory this is the 8.5 curve "henrylibre style."  It may work for others so I wanted to share.

Please keep in mind that sens is personal pref.  Please do not dismiss curves without adjusting the sens to your liking.  Typically what i do is adjust the sens til i hit my desired turn speed and then play with the curve for 1-2 hours.  Don't test this in training ground, but actually against real players.  You wont really know how good it feels until you do.  This is my personal experience, but i can attest the right way to test your curves.

Please make sure you guys keep posting your settings if you change things up.  This just helps the XIM users to get that much closer to finding the perfect setup for linear.

Is SA03 necessary to try out these curves? Not too sure about how to install it and if possible, save my current configs.
\\

This feels so good for me! Do you have any suggestions for ADS for Widow?

10
Game Support / Re: Post your Overwatch Settings
« on: 12:35 PM - 06/21/17 »
I use 0 window size. Got used to it and when I try even 5 now it feels awful. Just settle on something comfortable and stick with it  :)
Mine is more of a my sensitivity in xim4. I really like the low sense feel but I have a small hard mouse pad.

11
Game Support / Re: Post your Overwatch Settings
« on: 07:28 PM - 06/20/17 »
Is x/y radio needed for boost version?

No it's optional. If you want to speed up horizontal or vertical axis relative to the other you can use it (above 1.0 increases vertical relative to the horizontal, below 1.0 increases horizontal relative to the vertical).
.

What have you settled with for settings more specifically for window. I find myself  switching to often. I'm on the ps4 using a G503 with the G13.

12
Game Support / Re: OVERWATCH Linear Fix
« on: 03:12 PM - 06/10/17 »
Guys does this Linear work best with latest firmware or can I stick to my SA03?
I was running SA05 NPD and it didn't quite work right. Just went back to SA03 and works like a champ.

I also had this issue.

13
Game Support / Re: Post your Overwatch Settings
« on: 03:11 PM - 06/10/17 »
When I try and use the boost it feels dreadful. It's nothing even close to how the curve feels by a long shot. What is everyones exact settings using this method cause I feel I have to be messing up. I'm on ps4 as well and have been using the 8.5 curve....

Scratch all of that. You must have the latest firmware for the boost to work, I was on SA5 and i felt like trash but now i'm on the latest gold and its great.



Not true, I am on SA03 and feels better than latest.


HMMMM odd, Well i know for sure that the SA5-NPD is a no go.

14
Game Support / Re: Post your Overwatch Settings
« on: 11:32 AM - 06/10/17 »
When I try and use the boost it feels dreadful. It's nothing even close to how the curve feels by a long shot. What is everyones exact settings using this method cause I feel I have to be messing up. I'm on ps4 as well and have been using the 8.5 curve....

Scratch all of that. You must have the latest firmware for the boost to work, I was on SA5 and i felt like trash but now i'm on the latest gold and its great.

15
Game Support / Re: Post your Overwatch Settings
« on: 01:23 AM - 06/02/17 »
]
I will give this a shot. Did you notice things like the most dead on shot missing or not registering?

Not but it could be ur connection or playing on a TV with a lot of delay. If u play on TV make sure u have game mode on.

That's not it either. I'm playing on a BENQ zowie gaming monitor. I still do prefer this but its just off at the moment.

Pages: [1] 2