XIM Community

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Lukasz

Pages: [1] 2 3 ... 17
1
Beta / Re: Did you get the sample?
« on: 02:52 AM - 12/09/21 »
Speciality controllers dont work with the Beloader, you cannot connect those to your Titan Two or XIM. The Titan protocol has to be set to PS4 or Xbox to work with the Beloader.

Hey Sir, I have actually tried using PS5 controller with TT2 set to ps4, but still no luck.

Set USB Output Protocol to (USB Automatic PS4, XBOX....) make sure you have enough power for your XIM or TITAN2, because this was my Problem. Since I have an external Power source for my XIM or TITAN2, it works like a charme.

Well, it was worth the try, I had both the Apex and TT 2 powered by two different power supplies but still had no luck, tried it on all possible TT 2 output formats. I a beginning to think there may be something wrong with my TT2. The last thing to try is a different USB cable going from TT 2 to Beloader.

If you're running xim apex + TT then I suggest you go the hardwired remote play route. Not sure if beloader can handle that.

I had actually tried to connect just the TT 2 to the Beloader with no luck again, this time though I had no red light on the TT 2 output.

2
Beta / Re: Did you get the sample?
« on: 09:39 AM - 12/08/21 »
Speciality controllers dont work with the Beloader, you cannot connect those to your Titan Two or XIM. The Titan protocol has to be set to PS4 or Xbox to work with the Beloader.

Hey Sir, I have actually tried using PS5 controller with TT2 set to ps4, but still no luck.


Set USB Output Protocol to (USB Automatic PS4, XBOX....) make sure you have enough power for your XIM or TITAN2, because this was my Problem. Since I have an external Power source for my XIM or TITAN2, it works like a charme.

That is something to try, my Xim has an external power source but TT 2 does not, I will have try this one

3
Beta / Re: Did you get the sample?
« on: 09:13 AM - 12/08/21 »
Speciality controllers dont work with the Beloader, you cannot connect those to your Titan Two or XIM. The Titan protocol has to be set to PS4 or Xbox to work with the Beloader.

Hey Sir, I have actually tried using PS5 controller with TT2 set to ps4, but still no luck.

4
Beta / Re: Did you get the sample?
« on: 08:52 AM - 12/08/21 »
I have tried all of the above and still no luck, I may be doing something wrong, but at this point it is not working for me.

It does not work for you when you tested the Beloader in the process or does not work for you also (with this tutorial) the normal remote play and titan Two?

Yeah, I have actually misunderstood you at first. Anyway, I think I have tested every possible scenario with no luck.

I have tested Apex with a controller connected to Apex hub (both PS5 controller and speciality controller), no luck. I have tested with the controller (both PS5 controller and speciality controller) connected to TT2, no luck. I have even tested without a controller connected to either Apex or TT2, still no luck.

Unfortunately, I do not have an option to use a PC to test whether remote play works without the Beloander, if I could I would not have to get the dongle.

The odd thing is that I use to use TT2 and the speciality controller connected to Apex when playing PS5 games but then I had to take a break from games and when I came back this combo stopped working too. It is like the speciality controller does not authenticate or like it does not turn on in this combo. This is odd to me because this is how I use to play ever since I got my PS5.

Man, I regret not getting Xbox series X, I was really torn between the two and should have gone with Xbox Series X.

5
Beta / Re: Did you get the sample?
« on: 11:59 AM - 12/07/21 »
Oh no, I also use a Titan Two, I hope I didn't order the Beloader for nothing then. My Beloader currently has the following status: China to Germany - Transit in 7 day
After that I will be able to test it.

But at the moment I'm already playing with the Titan Two via Remote Play - for that to work I need to set the output protocol to PS4.

Have you already tried that? So my Titan Two + XIM works on the PC via Remote Play for PS5 games. Without Hori or anything else. Just XIM in Port A.



Quote
Please note the following setup for the Titan Two
1. Download Remote Play: https://remoteplay.dl.playstation.net/r ... 5_win.html
2. Log in with your Playstation Account you playing
3. Make sure both usb cables behind the titan are connected to your PC
4. Connect your Playstation 5 Controller to either port on the front of your Titan Two
5. Make sure remote play is enabled: PS5 settings -> system -> remote play enable
6. Go to Gtuner and click on "Device Configuration" (bottem right)
7. Go to output protocol and select "USB Playstation 4"


So thats maybe the problem?!?! - maybe you have to connect both cable to the PC to make Remote Play work.
So literally you have to connect Titan Two with both cable to Beloader.

Maybe Beloader --> USB Hub --> both cable from Titan Two?!?

But there is another post in the Titan Two forum, it says:

Quote
hi all, looks like in this post is mistake or it has been made for pads only.
i tested multiple confogirations to setup remote play and keyboard and mouse.

for me its working like that:
1. Download Remote Play: https://remoteplay.dl.playstation.net/r ... 5_win.html
2. Log in with your Playstation Account you playing
3. Make sure ONLY ONE usb cables behind the titan are connected to your PC (output)
4. here is information to connect ps5 controler but for me its working without any controler
5. Make sure remote play is enabled: PS5 settings -> system -> remote play enable
6. Go to Gtuner and click on "Device Configuration" (bottem right)
7. Go to output protocol and select "USB Playstation 4
8. connect mouse to port A on the front of titan 2
9. connect keyboard to port B on the front of titan 2

for me this configuration is working without any issue, tested in few different games ps4 and ps5
all scripts game packs and keyboard , mouse settings from titan 2 works correct

Ignore 8 and 9, you just have to put XIM to Port A.



Please test these things, maybe it works.(https://www.consoletuner.com/forum/viewtopic.php?f=2&t=18760&start=20)

I have tried all of the above and still no luck, I may be doing something wrong, but at this point it is not working for me.

6
Beta / Re: Did you get the sample?
« on: 05:48 AM - 12/07/21 »
Cool, I will give that a go when I get home later today and late you know.

It does seem plausible that their is a conflict if both the Beloader acts as a controller and XIM.

7
Beta / Re: Did you get the sample?
« on: 05:44 AM - 12/07/21 »
Sure, I will give that one a go.

That being said, I thought XIM needs a controller connected to it for it to actually work.

Maybe remote play is different because the remote software, or remote dongle like Belonader, is acting as the controller ?

8
Beta / Re: Did you get the sample?
« on: 03:50 AM - 12/07/21 »
Cool, let me know how it goes.

I don't know it this matters but my Titan 2 also stopped working with the Hori controller, you know one of these used fro the first workaround.

When I try to use it now it does not seem as though that controller gets turned on.

Maybe something wrong with my Titan 2?

9
Beta / Re: Did you get the sample?
« on: 03:11 AM - 12/07/21 »
Hi bossman,

I have tried doing anything from XBOX 360 to PS5 and 1000Mhz all the way to 125Hz and with Deloander none of these work.

Do you use the Beloader?

10
Beta / Re: Did you get the sample?
« on: 02:37 AM - 12/07/21 »
Unfortunately, I have tried it with the Hori controller I use to use for the first PS5 solution and still no luck, titan 2 still does not work with Beloander

11
Beta / Re: Did you get the sample?
« on: 09:55 AM - 12/06/21 »
Unfortunately, for me it is still no go, even when Titan is set to PS4, red light on the out put of titan

Whilst it's clearly working for many, there are 'some' - including me, who are struggling to get it to function. The setup is easy; this isn't a user error problem. Beloader to their credit, are also responsive in attempting to resolve the problem.

That all said, I'm expecting any path towards a refund is unlikely, although I haven't poked for that as yet. I'm also expecting at this point that I'll never get it to work.

Its not a huge financial hit, but something to keep in mind...
I mean if I only use XIM Apex with it then it works for me no problem, it is only when I am trying to use it with Titan 2. So far I have been trying to use it with PS5 controller and I am thinking this may be the issue. I will see if anything changes if I use a different controller.

12
Beta / Re: Did you get the sample?
« on: 01:14 PM - 12/05/21 »
Unfortunately, for me it is still no go, even when Titan is set to PS4, red light on the out put of titan

13
Beta / Re: Did you get the sample?
« on: 12:36 PM - 12/05/21 »
I see, I am going to try it later then.

Do you think this will have some negative effects? I mean it should still play PS5 games, right?

14
Beta / Re: Did you get the sample?
« on: 09:13 AM - 12/05/21 »
Hey,

Does any of you use the Beloader/Titan 2/Apex combo?

I can get the Apex to work through Beloader but not the Titan 2.

15
General Discussion / Apex legends 120Hz
« on: 01:55 AM - 07/01/21 »
Hey all,

A mate of mine had convinced me to play some Apex Legends with him and have a simple question about that game on PS5.

Do you guys know if the game runs on 120Hz? and if so, do I need anything special on the XIM side to run it at 120Hz?


Pages: [1] 2 3 ... 17
Admin