XIM Community

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Leotigano

Pages: [1] 2 3
1
Game Support / Re: Fortnite - Season five setup
« on: 10:03 PM - 08/01/18 »
Hi guys,

Part shameless plug for my youtube channel, yes.

But many people have asked me so thought i would leave my most up to date config here with this video.

Changed it up a bit so i could be even more aggressive , my hip was a tad slow before.

Here is the config in full:

12k DPI
1000 hrtz and polling
Default Sync
6.50 Hip
ADS profile is inactive (double click the activate button (RMB) on the ads page so it says none)
All in game settings at maximum except:
ADS 0.70
Scope 0.60
No smoothing / XY changes
AA on

21 Kill Solo here - one of my most fun games i think


Appreciate the support.

Dis I was just wondering... what servers do you play?

2
Not playing this game for a while makes you quickly regress for sure, if i don't play for a few days it can take hours for me to warm up. Its speed of thought (and execution) that suffers.

I have been using a different config, not due to any aim change i'm aware of, just to see how i performed and compare.
Xim
I haven't noticed a difference in my game play as of yet but i think i have said before i'm not sure the config has that much of an impact.

However you guys make like it... so here it is.

12k DPI
1000 hrtz and polling
Default Sync
5.50 Hip
3.50 ADS
All in game setting max
Scope 0.65
No smoothing / XY changes
AA on

Dropped another 20 Bomb with those settings here:

https://www.youtube.com/watch?v=U_w9ac6OKYY&t=6s

About to upload a 20 kill solo (ish team died / was useless) squad game, should be up in a bit.

Oh and while im at it, shameless plug for subs! Appreciate any support i can get - cheers
thanks you!!!! Is amazing !!


D1sable are you still removing the ads settings with this current config like you did when you were at the 3200dpi

Tried this settings. HIP feels good but too slow in my opinion. I had to bump it up. Now ADS is still tweaking. I tried disabling the XIM ADS yesterday as someone suggested here and it feels ok. But cant tell the difference.

Now comparing all my setups so far I reckon I was more consistent with low dpi... dont know why.

I have been struggling to stick with one setup.

3
Has anybody else found that something feels off with their aim since the recent changes they made to ads to address ghost peeking. Thereís the issue of your body blocking the reticle sometimes which they are aware of. But something else feels weird too and I canít quite work out what it is. My aim seems to slow down and accelerate unpredictably at times. Thatís about the only way I can describe it. Even chopping down a tree my aim seems to occasionally drag slowly.

Have seen posts on reddit and Fortnite forums saying that the aim assist is playing up. Apparently there is issues with aim assist not activating properly sometimes. Also apparently there is a bug where aim assist will activate over a location where a player had previously died. The ads sensitivity setting name was changed to ďcontroller targeting sensitivityĒ and x/y was changed to 0-1.0 instead of 0-10, and some have said that their sensitivity has felt messed up since that.

Iím losing tons of close quarter fights especially. I was at 30% solo win rate so far this season. The last few days though my win rate is only 12%.

I have the same problem in regards to the aim slowing  down unpredictably... i also notice when chopping down trees etc...
The thing is... still playable, but of course it could be better. But as the other guy just said, I think this is an Epicís issue...

4
It's a tad floaty feeling compared to common.  Try to adjust your ADS. Might help as ARs use that. I use around 80% of my Hip.

Forgot to ask, does Mjfame settings has 500 or 1000hz for the apex app?
I will have a go tonight and try to tweak my ads sensitivity.
Tks

5
Hi,

Wanted to share my feedback for this.

So I've tested two setups in Battlefield 1.
1. EXTREME - [email protected] - Off - 500/500 - Ballistics set to 54 for [email protected] cm
2. [email protected] - Default - HIP/ADS custom so I can do 360 in 40 cm

I've joined an empty server and tried to follow edges with my aim and the second config feels way better.
I manage to draw edges more smooth compared to first config. First config seems like it had some lag and it was not smooth at all.

Not sure if i am missing something.

Thanks for putting time in getting this tutorial done.

--
Update-1: Forgot to mention hardware. Logitech G Pro on Cloth pad.

A little too late here. But just wondering if you have tried using Common instead of Default sync. (and if you still using this settings after all patches released)

Thanks

6
Is anyone still using Mjfame settings? (500 hip 500 ads)
Have you guys found any optimal settings for the latest patch?
Thanks

I use mjfames extreme.
https://community.xim.tech/index.php?topic=65974.0

It is clean. So is his Purist setup. I don't know why but I prefer low DPI.

Do you get any aim assist from his extreme setup?
I tried once, cant remember which one. But i was struggling a bit when using ARs. Shotties were sharp but ARs were a bit unpredictable...

7
Is anyone still using Mjfame settings? (500 hip 500 ads)
Have you guys found any optimal settings for the latest patch?
Thanks

8
After last released patch I did notice all work
Better,I will reccomend off sync and low dpi to best aim possible.Also turn ON option for running without L3 button,gameplay become smooth like never

Could you please explain why sync off and low dpi?

Cheers

9
Hey Ximmers this is by far the best fortnite settings ive tried
 12k dpi 1khz mouse and manager

Hip- 4
Sync common

Ads- 3
Sync common

Heres a 17 kill solo game I got with these settings enjoy! https://youtu.be/G-ZIN3fTRNM

Thanks for sharing! I will guve a try!

What about ingame settings and what sync (off, default, common)?
 X,Y? Ads? Scope?
Thanks

My sync is common for both ads and hip and I run everything in game max exept for my scope which is 0.80

Thanks mate!

I will try this tonight!

10
Hey Ximmers this is by far the best fortnite settings ive tried
 12k dpi 1khz mouse and manager

Hip- 4
Sync common

Ads- 3
Sync common

Heres a 17 kill solo game I got with these settings enjoy! https://youtu.be/G-ZIN3fTRNM

Thanks for sharing! I will guve a try!

What about ingame settings and what sync (off, default, common)?
 X,Y? Ads? Scope?
Thanks

11
Sup everyone...

Anyone using an updated settings for fortnite? Just wondering since i have tried a few from different posts but i still havent found an optimal for me. I am actually only struggling a bit with ARs medium / long range target tracking... I keep over aiming when i am trying to track.

Thanks

12
Hello fellas.

Now with the Playground mode I was focusing on tune up my sensitivity.

While doing the "360 degree turn drill", I notice something:

If you place your mouse on a startup point A on your mouse pad (e.g. left edge), cross-hair in-game pointing to a reference point in the wall, then you move the mouse in a straight line, constant medium velocity until you do a full 360 turn, getting back to the same starting point of reference on screen.

At your mouse pad you travel from point A to point B. If you get back from point B to A (doing the turn in another direction). When you get back to the starting point of reference on screen: you are not back to the same spot (A) at the mouse pad. I'm about 2 cm off.

In another games like Battlefield 1, EA Battlefront 2015 and 2; if you do a full 360 turn and then get back, you will return to the same starting point at your mouse pad, not in Fornite BR.

I don't know if is only me or the game look mechanics, but that doesn't look like 1:1 movement.

I asking for you guys to try out.

Mouse Sensitivity: 12000 dpi / 1KHz pr
XIM Apex:  Sync  = Common / 1KHz rr
HIP Sense: 2

Wow that is interesting... following up!
since I cant test right now :(

13
Game Support / Re: Post your 4.4 Fortnite settings here!
« on: 06:15 AM - 07/01/18 »
Can someone post d1sable settings?

I just read 2-3 another settings. Dont know what is actual

From the other thread.
Been changing alot since patch but on this atm.

3200 dpi
500 hrtz and polling
Common
14.25 hip
No ads profile
0.80 ads in game

Got 3 games back to back of 16 to 18 kills this morning so it feels quite smooth.



Here

Sorry about the question but how do you deactivate the ADS profile on Xim Apex?
Is it by turning to HIP translator and keep the same sensitivity?
Thanks in advance! :)

Under the ADS tab double click the activation key (1st click is listening second click puts it to none) so that nothing is selected.

Oh got ya! Thanks
I tried Mist and Dis settings. In my personal opinion if you prefer less sticky aim go for Mist. If you like more aim assist go for Dis settings.
Both work very well for me. But i still think tracking while ADS can be smoother on medium to long range. It is very tricky to find an optimal config atm.

14
Game Support / Re: Post your 4.4 Fortnite settings here!
« on: 01:06 AM - 07/01/18 »
Can someone post d1sable settings?

I just read 2-3 another settings. Dont know what is actual

From the other thread.
Been changing alot since patch but on this atm.

3200 dpi
500 hrtz and polling
Common
14.25 hip
No ads profile
0.80 ads in game

Got 3 games back to back of 16 to 18 kills this morning so it feels quite smooth.



Here

Sorry about the question but how do you deactivate the ADS profile on Xim Apex?
Is it by turning to HIP translator and keep the same sensitivity?
Thanks in advance! :)

15
Quick one, are u guys using high or low DPI on your mouse? Could you please say why?
I have tried both but still cant decide...
Cheers

here you have a tutorial that explains dpi and whats best in detail:
http://community.xim.tech/index.php?topic=65749.0

Yeah thanks Od1n ! I did see your tutorial and it made me chose low DPI... i was just wondering what the majority in here have been using to try something new... i still think i can tweak a little to improve it but i am not vere savvy to figure it out myself. :)

Pages: [1] 2 3