Messages

1

Game Support / Re: Share: MW2 ST and your custom config

« on: 02:45 AM - 11/28/22 »

I just set this up 1:1. The aa is strong! I like it
However i play normally with 100.can i keep that?
And also your deactivation and activation delay is highere thab standard. Iis that suitable for assault rifles and smgs?
And lastly my y axis ls slow. Specially when i want to throw nades etc.
How can i make lt faster?

Post2:
nevermind i found i had to change the value in x/y axis. helped alot.
ive been playing this whole evening with your setup. i got  used to thr 110 FOV, coming from 100. 
i really did like your setup. the AA was sticky and magnetic, sametime as the hip and ads sens was quiet good.

will play more this evening

The reason why my Activation/Delay is higher than normal is because the sprint to fire and general ADS time in this game is terrible.  I also use Autotactical Sprint so this makes sprint to fire worse usually lol.  I've just used it since launch and dont notice any real downsides, I run it just fine on all gun types.  Also yea X/Y ratio can be increased if needed, I only bump it up for better recoil control, I use to run 1.10, but generally I've been running this setup since WZ1 launch, only thing I've changed has been the ACT/DELAY values.

Also everything here is subjective and personal preference at the end of the day so feel free to adjust to your needs.

2

Game Support / Re: Share: MW2 ST and your custom config

« on: 06:33 PM - 11/21/22 »

I've used this on both XSX and PC, MP and WZ, felt great on both. I love abusing the AA though and have no problem snapping on multiple people lol.

Ingame Settings
110 FOV
Interface -> Color Customization -> Filter 2 -> Both -> Intesity is personal preference  (Neutral is PING color)

Controller Settings
20/20 in game sens
Standard Curve/Black Ops AA
ADS Transition Instant not Gradual
Auto Tactical Sprint enabled
Prioritize Interact (Interact/Reload Behavior-> In MP I use Prioritize Reload in WZ Interact)
Armor Plate Behavior Apply All
.04 left and right stick minimum / 1.0 maximum on both
left/right trigger deadzone 0 or 0.02

Mouse DPI Setup/Settings
G-Wolves Skoll w/ Hyperglides
DPI 3200 Polling Rate 1000Hz
XIM Polling Rate at 500Hz (This combo just feels better to me than 1k/1k)

HIP Page
HIP SENS: 24.33
Sync: Off
Smoothing: 4
Y/X Ratio: 1
Steady Aim: 0.4
Boost: 0

Under Movement
Simulate Analog Behavior 72%

Aim Down Sight Page
Activation Delay: 320
Deactivation Delay: 320

ADS SENS: 19.13
Sync: Off
Smoothing: 4
Y/X Ratio: 1.04
Steady Aim: 0.4
Boost: 0

I use same config for WZ2 except I use auxiliary and bind it to Left CTRL (I hold this when parachuting/driving)

Sens: 173
Sync: Common

3

Game Support / Re: ADS Aim Transition - MW2

« on: 06:22 PM - 11/21/22 »

I've been playing with instant since the game dropped, I have my ADS Activation and Delay at 320ms

I also run different deadzones from the one in "requirments" and have no issues.

4

XIM APEX Discussions / Re: Black ops st on ps5

« on: 05:43 AM - 12/08/20 »

They added a new aim assist option with the update. Try using legacy. It uses the AA from WZ and feels 2x better imo.

5

Beta / Re: XIM APEX BETA [Firmware 20201201] [Xbox Series X/S] (**LATEST**)

« on: 06:29 PM - 12/02/20 »

I have noticed this laggy feeling recently as well. I hop back to the home screen and then back into the game and the laggy feeling is gone. Happens in sp and mp.

This happens to me since latest update on CW, it starts the game in 60Hz for some reason, have to bring up the Xbox Guide and then go back to game for it to swap to 120Hz, not related to the XIM though.

6

Game Support / Re: Cold War ST has been released

« on: 10:32 PM - 11/29/20 »

Series X here, feels the same as the BO4 config meaning it feels fine for me.

I had to increase my hip sens by hitting the + symbol like 12 times over the BO4 config and ADS probably 4 times.  Other than that feels great.

XIM/MOUSE Settings

Mouse: Razer Viper Ultimate in Wireless mode Mouse Polling: 1000Hz Mouse DPI: 1200 APEX Polling Rate: 500Hz APEX Version: 20201122

DZ in-game 7-100 both sticks.

HIP Settings

Sensitivity: 21.08 Synchronize: Common Smoothing: 3 X/Y Ratio: 1.00 Steady Aim: 0.4 Boost: 0 No Curve

ADS Settings

Sensitivity: 8.32 Synchronize: Common Delay: 234ms Deactivation Delay: 0ms Smoothing: 2 X/Y Ratio: 1.10 Steady Aim: 0.2 Boost: 0 No Curve

I do have a question though, wouldn't it have been better to have trained the ST at 0-100 DZ, also why not use the next gen console to train the Xbox config wouldn't it being smoother help the training, just curious?

7

Game Support / Re: Cold War ST has been released

« on: 12:51 AM - 11/28/20 »

I just had a little play with it and its kinda bad on the XSX.. I don't know if that's because I've been using the bo4 ST for 2 weeks I don't know..

I had to up my sens on hip like 8x by pressing + but that's about it, feels just as good as BO4 tbh.

Deadzone Min-Max 7-99 on both sticks.

8

Game Support / Re: Where is the cold War official config?

« on: 06:49 AM - 11/27/20 »

I'm not sure if the 120fps makes the look mechanic different but it is smoother.

IDK, I’m really skeptical that the game is really pushing 120 FPS. The capability to output 120FPS is not the same as actually doing it. If I had to bet, this game is putting out 60FPS. There’s also issues related to HDMI 2.1 that limit compatibility.

Yea I main pc, this game isn't 60fps atleast on the XSX. When ever I play 60 I immediately notice the stuttering, you also don't need hdmi2.1 for 120FPS anyways. Hdmi 1.4 can do 1080p/144hz hdmi2.0 can do 1440p/144Hz.

Now if you leave 4K on, on atleast the XSX you will only get 60fps in game if your monitor isn't capable of 120Hz since the game is using vsync. Idk about ps5 I heard from my friend he can't use his hdmi 1.4 monitor and get 1080p/120Hz so that's an issue on Sony end since 1.4 is more than capable of 1080p @ 144Hz like mentioned earlier.

There also seems to be the issue of installing the last gen version on the next gen consoles as for some reason the default install on both the ps5 and Xsx was last gen version, I've seen lots of people post about realising they were playing the wrong version of the game since launch 🤣

I think the new gen version of BOCW isn’t ready yet and that’s why we’re playing on old gen version. Am I wrong?

Yes, you have to make sure you install the next gen version because both consoles are backwards compatible. The next gen version is a whole new game lol

Oh I didn’t know, thanks.

But how can I recognise the new gen version? It doesn’t give me any download options on Xbox store...

Go on the Xbox store, search for cold War with the x|s symbol and install it. Pretty sure you need cross gen bundle/ultimate edition.

Also you can manage install, hover over cod CW and press X for file info. Should see GameXSX in the full name if it's correct version.

9

Game Support / Re: Where is the cold War official config?

« on: 08:01 PM - 11/26/20 »

I'm not sure if the 120fps makes the look mechanic different but it is smoother.

IDK, I’m really skeptical that the game is really pushing 120 FPS. The capability to output 120FPS is not the same as actually doing it. If I had to bet, this game is putting out 60FPS. There’s also issues related to HDMI 2.1 that limit compatibility.

Yea I main pc, this game isn't 60fps atleast on the XSX. When ever I play 60 I immediately notice the stuttering, you also don't need hdmi2.1 for 120FPS anyways. Hdmi 1.4 can do 1080p/144hz hdmi2.0 can do 1440p/144Hz.

Now if you leave 4K on, on atleast the XSX you will only get 60fps in game if your monitor isn't capable of 120Hz since the game is using vsync. Idk about ps5 I heard from my friend he can't use his hdmi 1.4 monitor and get 1080p/120Hz so that's an issue on Sony end since 1.4 is more than capable of 1080p @ 144Hz like mentioned earlier.

There also seems to be the issue of installing the last gen version on the next gen consoles as for some reason the default install on both the ps5 and Xsx was last gen version, I've seen lots of people post about realising they were playing the wrong version of the game since launch 🤣

I think the new gen version of BOCW isn’t ready yet and that’s why we’re playing on old gen version. Am I wrong?

Yes, you have to make sure you install the next gen version because both consoles are backwards compatible. The next gen version is a whole new game lol

10

Game Support / Re: Where is the cold War official config?

« on: 05:41 PM - 11/26/20 »

I'm not sure if the 120fps makes the look mechanic different but it is smoother.

IDK, I’m really skeptical that the game is really pushing 120 FPS. The capability to output 120FPS is not the same as actually doing it. If I had to bet, this game is putting out 60FPS. There’s also issues related to HDMI 2.1 that limit compatibility.

Yea I main pc, this game isn't 60fps atleast on the XSX. When ever I play 60 I immediately notice the stuttering, you also don't need hdmi2.1 for 120FPS anyways. Hdmi 1.4 can do 1080p/144hz hdmi2.0 can do 1440p/144Hz.

Now if you leave 4K on, on atleast the XSX you will only get 60fps in game if your monitor isn't capable of 120Hz since the game is using vsync. Idk about ps5 I heard from my friend he can't use his hdmi 1.4 monitor and get 1080p/120Hz so that's an issue on Sony end since 1.4 is more than capable of 1080p @ 144Hz like mentioned earlier.

There also seems to be the issue of installing the last gen version on the next gen consoles as for some reason the default install on both the ps5 and Xsx was last gen version, I've seen lots of people post about realising they were playing the wrong version of the game since launch 🤣

11

Game Support / Re: Where is the cold War official config?

« on: 05:42 PM - 11/23/20 »

So is the ST being trained on the XSX and Last Gen consoles?  I'm not sure if the 120fps makes the look mechanic different but it is smoother.  Not in a rush just curious whats going on with these new consoles in play now.  (I know PS5 will probably be a minute before its supported.)

12

XIM APEX Discussions / Re: make XIM on PC for ModernWarfare feel good

« on: 03:46 PM - 11/19/20 »

Use Sync Off, after that you can pretty much run any DPI and it feel good.

13

Beta / Re: XIM APEX BETA [Firmware 20201111] [Xbox Series X/S] (**LATEST**)

« on: 12:58 AM - 11/18/20 »

If you guys are having issues try going to settings, power, full shutdown. Wasn't working for my friend until he did that.

14

Game Support / Re: Xim apex automated anti recoil trick doesnt work for me

« on: 05:46 PM - 11/17/20 »

This might help

15

Game Support / Re: Xbox series x compatibility

« on: 01:21 PM - 11/17/20 »

You might just have a busted console then. Like I said not a single crash has occurred on my system. My buddies was crashing but then he realized he was playing the Xbox One version of the game.