XIM Community

XIM APEX => Game Support => Shared Configs => Topic started by: GoodAimButATankMain on 05:55 AM - 05/16/20

Title: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 05:55 AM - 05/16/20
UPDATE

On my discord server, jeff87356 let me know that using SAB off can cause a wierd mouse bug where the cursor will speed up for a second or so and then slow back down. He said he found the fix to the problem by changing the SAB value to 0% or above so big thanks to him! :)

SMALL UPDATE

Hey guy's, real quick update here! I created a youtube channel, read the "About me" page to see if u would be interested in my content :) Here is the link to the channel if anyone is interested:
https://www.youtube.com/channel/UCeFZX4ht4zxyo7nT3ueQPjw/about

PS4 UPDATE
Xim user "jerrylee" followed my guide and made a curve for the ps4 for everyone :) It requires the same settings as my xbox configuration, just copy this curve instead:

(jerrylee's curve)

>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:hAKGCoeDiMeJ6IrYi66MmY2Mjl2PGY/OkJmRa5I1kvmTtJRalPaVi5YolsOXXZfrmHKY9Zl1mgiaoptGm+KcfZ0YnaqeMp61nzMfyKBdoP+hlaIdoqCjH6PrpJmlMqW6pjemqycQ:X5BC
<<< XIM APEX END COPY <<<

(The curve i created with jerrylee's data just to check it was made the same. He messed up the last few data points on his curve, but it doesnt make any noticable difference!)

>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:hAKGCoeDiMeJ6IrYi66MmY2Mjl2PGY/OkJmRa5I1kvmTtJRalPaVi5YolsOXXZfrmHKY9Zl1mgiaoptGm+KcfZ0YnaqeMp61nzOfw6BdoP+hlaIdoqCjH6O8pG+lMqW6pjemq6cQ:X5BC
<<< XIM APEX END COPY <<<

UPDATE 4
So guys, after doing way more tests than before, i discovered the data was inaccurate. This is the updated curve, this one feels MUCH more consistent then the last :) However, the new curve is a bit higher than the old one to make the mouse movements 1:1 so u will need to lower ur sensitivity a tad from the last config. I found this decrease to be arround 5% lower than your current sensitivity so simply multiply ur current sensitivity by .95 and add this curve new curve. Also, because there is so many curves now in this config, for my next overwatch config i will make a new post so it isnt so cluttered. Heres the curve guys, excited to see what u guys think of it:

>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:hm6I/4qki/WNHY4njx6QBJDeka2SdJMyk+qUnJVIleeWeJcDl4aYCJiFmP+Zdpnzmm+a7Jtom+ScYZzdnVmd1Z5Sns6fSp/IoEagxaFEob+iOqK0oy2jqaQlpKGlH6WbphemlKcQ:X5BC
<<< XIM APEX END COPY <<<

UPDATE 3
So ive decided to go back on what i said about not updating the 33AEI curve. Since i think this one will be the "jack of all trades" curve, i want it to be as best as possible. Im going to redo all of my data tonight, and increase my time spinning from 2 minutes to 10 minutes. Ill do more tests than before as well, so the curve more closely represents the game :) This will probably be the last update to the 33AEI curve and will probably be released in a couple days. Then i will start working on the exponential release.

UPDATE 2
A comment on my other post got me thinking "what is an s curve and why do games use it?" And then it occured to me that an s curve is just 2 parabolas jointed together :) So, looking back at my overwatch data, turns out i used s curvws along the entire path of a parabola, and thats what was causing a tiny bit of inconsistency, but i know people like that curve so i want to leave both curves up for u to decide which one u like more. All my other settings in the config stayed exactly the same, just copy n paste the new curve n ur good to go :)

UPDATE:
Looks like the curve doesnt work on ps4, sorry guys :( If you are interested in creating a curve that does work for ps4, you can read my guide :) Send me a message if you have any questions!

Origional post:

Intro

Hey guy's, as many of u know this is my favorite game. I have hit top 500 on xbox multiple seasons now, and mid masters on pc. I also know many top 500s give out false config's all the time and hide their real one's. This is 100% my genuine config now guys. I have many hours sunk into this game and have tried every possible config out there. The aiming just always felt wierd. And I just recently found out the "linear" config isnt actually 1:1, and this is obvious when doing a 360 turning slowly and a 360 turning fast. When turning fast, you wont go as far as when u turn slowly. Well, i wrote a guide on to make your own custom game ST and used that to make my own linear ramp+aim ease in ST. This gets rid of microstutter that is used in the main "Linear" Config while still keeping the good tracking, and actually makes ur movement 1:1. Literally the best config I have used :) Also, it is made on xbox, and I think because the xbox has a higher deadzone value than the ps4 does, you will have to add some boost. I dont own a ps4 so i cant try it, but i think it will work on both.

Config

Create a "Generic Alpha" profile. Change your xy ratio to 1.5, then go into your curve editor and paste 1 of these curves. The first curve is the old one, i used the wrong calculations with it, but many people still like it so im not going to take it down. The 2nd curve is the updated curve and will offer a more 1:1 feel than the first :)

Curve 1 (Non updated curve)
>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:hoKI74qMi9WM8433juqP0ZCokXSSNZL5k8iUfJUelbOWPZa/lzuXsZgkmJOY/5lpmdKaOZqfmwSbapvPnDScm50CnWqd1J5Anq6fHp+RoAigg6EDoYiiE6Kfo0Cj5aSWpVWmJ6cQ:X5BC
<<< XIM APEX END COPY <<<

Curve 2 (Updated curve)

>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:hoKI4YqCi9qNBY4RjwaP6pC/kYiSR5L9k6uUU5T1lZGWKJa7l0qX1ZhcmOCZYZngmlua1ZtLm8CcM5yjnRKdf53qnlSevJ8in4ef66BOoK+hD6FtoeWiZKLoo3WkC6SupV+mJKcQ:X5BC
<<< XIM APEX END COPY <<<

Now go into the game and change your aim type to linear, and change your "aim ease in" value to 33. The ST i created was made on 33 so anything different wont have 1:1 mouse movements. I made it on 33 because 65 felt the closest to exponential (good micro movement, bad tracking) and at 0 its linear(good tracking bad micro movement), and i wanted a mix of both good micro movement and good tracking.

Thats the whole setup. I will provide my full optimal settings that work for me :)

My personal options ATM

Mouse:
Dpi 3200, 1000hz

Xim:
70 hip sens default sync
(Might mess with "Simulate Analog Behavior" at a later point)
50 Ashe ADS
35 Widow/Ana

In game:
100 100 sens
100 aim strength
100 Aim assist ease in
100 Aim assist window size
0 Aim smoothing
33 Aim ease in
Linear Ramp
100 aim speed for everyone with a scoped sens
100 Friendly ana aim assist
60 Widow grapple sens

Reticle:
Green dot
Size 4
100 Opacity
50 outline opacity

Also, it would be great if someone on ps4 could let me know how this feels and what boost to use with the curve :) And here is the link to my guide on how to make a ST from scratch for anyone interested in how i did it:

https://community.xim.tech/index.php?topic=87372.0
Title: Re: (T500 Best Config) Overwatch Linear Config Without Micro Stutter
Post by: SmugGreen on 08:03 AM - 05/16/20
Wow, this actually doesn't feel bad. I might start using this tbh. Just feels a bit too loose, but that might just be me. Nice job buddy
Title: Re: (T500 Best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 08:07 AM - 05/16/20
It probably feels loose because ur muscle memory is used to playing the game without 1:1 movements lol. This curve makes your aim truely 1:1 so it will be way more consistent than playing on standard linear, id suggest messing arround with your aim assist settings if it feels loose :) Try lowering your window size and aim assist ease in a bit. I like keeping all mine on 100 because i play projectile hero's so i like having the aim assist kick in slowly. I main roadhog and ball

But, this curve will help with flicking heroes the best imo, it makes your flicks feel way more consistent than the standard linear config.
Title: Re: (T500 Best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 10:23 AM - 05/16/20
UPDATE:
After playing a few hours, i found 100 aim assist ease in and window size was too "loose" as well. The perfect window and aim ease in i found was 40 window size, and 60 aim assist ease in. With this, i feel like the aim assist is actually assisting me while still not being strong enough to lock onto the wrong target and send me flying lol
Title: Re: (T500 Best Config) Overwatch Linear Config Without Micro Stutter
Post by: Jacob smurfff on 05:27 PM - 05/16/20
Dont work in ps4
Title: Re: (T500 Best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 07:28 PM - 05/16/20
Oh man it doesnt? That sucks :( Im sorry guy's. If anyone with a ps4 really want's this config and has a few hours to spare, you could always just read the guide i posted on how i made them. If you have any questions send me a message n ill try my best to answer them! All i ask is that if you do create a curve this way, you give a link saying the curve was made using my guide, and share the curve for everyone else to use :)
Title: Re: (T500 Best Config) Overwatch Linear Config Without Micro Stutter
Post by: De_Haos on 04:13 AM - 05/17/20
Please keep up with those updates, cause currently you are THE ONLY ONE who makes config for OW. No one bothers to update it except you.
Thank you.
Title: Re: (T500 Best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 04:30 AM - 05/17/20
Yes, im still trying to make some updates on overwatch specifically :) I think i may have used a few wrong values here and there because even though the aim feels pretty 1:1 and consistent, it still definitely still has room for improvement. Its still way better than the standard STs in my opinion though, I plan on redoing this ST in a few days, but doing more spin tests and spending more time creating it than i did for this config so i can try to get the data more accurate.... I dont think i will ever be able to get a "Perfect" curve with my method, but i think it can get pretty close if i give it more time. Also, 33 aim ease in is about half way between linear and exponential so thats why i chose it, but in the future im planning on releasing new configs for different aim ease in values so people can choose which they like the best :) Higher aim ease in offers better micro movement, while a lower value offers better tracking
Title: Re: (T500 Best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 07:01 AM - 05/17/20
Just posted the new updated curve in the config..... Also im just noticing that this post is literally littered with smiley faces from me hahaha
Title: Re: (T500 Best Config) Overwatch Linear Config Without Micro Stutter
Post by: Crunchee on 07:08 AM - 05/17/20
Just posted the new updated curve in the config..... Also im just noticing that this post is literally littered with smiley faces from me hahaha

Nothing wrong with smiling! Thanks so much for these configs this is the best overwatch has ever felt no lie
Title: Re: *UPDATED (T500 Best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 07:15 AM - 05/17/20
Yeah im glad u guys are liking it! Makes the game way more enjoyable now that we have working STs for it lol. And lmk what u guys want me to make next, I can either make a 0 aim ease in curve that would be good on close range tracking and flick characters, or a 60+ aim ease in config for precise heros. I plan to make both at some point but im busy with other things atm (Like getting my deep rock galactic curve done). Also, im thinking of maybe making a thread for unofficial releases/updates to st's i make and will accept requests from people lol.
Title: Re: *UPDATED (T500 Best Config) Overwatch Linear Config Without Micro Stutter
Post by: Boomboks on 07:24 AM - 05/17/20
Thanks for these, friend. You're a legend  :)

My vote is for a higher ease in, I'd like to see how a more precise version of this curve feels. My tracking is perfect up close with Tracer, but can feel a little jittery and inprecise on Widow, or even Soldier 76 when targets are long distance. Although maybe that's just that I'm using it at such a high sens.
Title: Re: *UPDATED (T500 Best Config) Overwatch Linear Config Without Micro Stutter
Post by: Boomboks on 07:56 AM - 05/17/20
Actually, just getting used to the updated curve, might not even feel any of that jitter at all anymore, even on widow. This ST feels so good. You've made my quarantine way better
Title: Re: *UPDATED (T500 Best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 08:10 AM - 05/17/20
Awesome! N yeah, i think the updated curve eliminates most of the jitter. But that jitter messed w the aim assist in a good way in a lot of situation's imo so i still think its a decent curve lol, even if it was made by accident. Im actually currently working on a way to add custom curves to these curves. I think an anti aim assist curve on top of the updated one would be GODLY with close range
Title: Re: *UPDATED (T500 Best Config) Overwatch Linear Config Without Micro Stutter
Post by: Crunchee on 08:43 AM - 05/17/20
Re: your poll, doesn't linear handle AA better than expo?
Title: Re: *UPDATED (T500 Best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 08:54 AM - 05/17/20
Not entirely sure. I think they both will handle it about the same at linear with 60 aim ease in and expo with 0 , i think the only reason why linear feels like it handles aim assist better than exponential ramp is because the normal linear overwatch config feels a bit better than exponential ramp does. Im not saying the standard linear is good, because i think its broken... I just think its not AS bad as the standard exponential config thats out right now lol
Title: Re: *UPDATED (T500 Best Config) Overwatch Linear Config Without Micro Stutter
Post by: Crunchee on 10:12 AM - 05/17/20
Oh right, I've been playing on expo for about 6 months now and it's always felt weird so I spent months digging through old posts trying to find something to help and gave up. That's where I read linear has better AA and tested it but the standard ST felt so jittery

This however feels similar but so much smoother and I feel like actually controlling a cross hair now! I'm really excited to see what you can do with expo to compare if it makes any at all of a difference.

You're the t5 player and I'm stuck in plat so I'll take any advice ya got 🤣
Title: Re: *UPDATED (T500 Best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 02:32 PM - 05/17/20
Yeah, everyone can expect a exponential ramp update in the near future to try n get it as good as possible :) BUT, exponential will most likely be worse than my linear+33aei curve at close ranges because expo will have better slow movements than linear, but worse when it comes to fast movement's. Luckily though, the game offers character specific setting's so u can have a separate config set up for different characters and then hot swap them on the go while ur in a match depending on the character ur playing :) (Like if u want widow to have expo config, u can create a new xim config named widow... copy the expo ramp, then go into overwatch and change ur widow aim type to exponential and then all ur other characters will still be used with linear exept her)
Title: Re: *UPDATED (T500 Best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 05:23 PM - 05/17/20
Also, i dont know if u guys can tell, but towards the end of the curve at 85.57, there is a increase in the curve. This is because i didnt get enough sample data so the parabolas didnt line up nicely lol. And on top of that, i used a the data i had at once for each parabola (Basically i used 6 data points at the same time and followed the parabola to get my values). Both of these things negatively affects the ST, so in the future i will use 3 points at once instead of all 6 to build each individual segment of the parabola (Difference will barely be noticable but it should be a tiny fraction more accurate) and get more data samples (Difference will be a bit more accurate). :) However, i dont think its worth it to recreate this ST because the difference will be minimal compared to the ammount of time it would take to do. If i did update the ST, you would likely only notice this change if u play with no aim assist, or are doing accuracy tests while standing still.

But again, in the future i will use more data points to further optimize the ST's i create to try to get it as accurate as i possibly can for everyone before i release them :)
Title: Re: *UPDATED (T500 Best Config) Overwatch Linear Config Without Micro Stutter
Post by: Crunchee on 04:06 PM - 05/18/20
In three days I've probably put in 25 hours with this curve and I've gotten used to the movements much more fluent. My mouse flicks feel so much better I don't know if it can get any better but I'm pumped to see if you come up with anything else
Title: Re: *UPDATED (T500 Best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 04:20 PM - 05/18/20
Yeah, im about half way done with my tests :) Im doing about double the amount of tests this time, and doing the tests for about 1 and a half times longer on each test.... So its taking a while to make, but this will hopefully get it really close to perfect :) Im going to continue working on the curve throughout the day so expect the new curve either later tonight or tomorrow depending on how i feel. Ive been doing calculations non stop for the past like 3, 4, or maybe even 5 days so im starting to get wore out by them lol. Im also starting to get more request's for other games... so i might slow the process down quite a bit after i complete the updated curve. Ill probably take a break from creating configs for a little while and just enjoy the games lol. This doesnt mean I will stop making curves for games, it just means each config will be taking longer till its finnished.
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 02:37 AM - 05/19/20
Just put my final curve up! Let me know how u guys like it :) Doing accuracy tests with this curve compared to the last shows its way closer to 1:1 than the other's.
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Crunchee on 08:28 AM - 05/19/20
Sweeeet Ive been playing so I'll try this curve in like an hour with a fresh hand and let you know
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Crunchee on 04:36 PM - 05/19/20
Feels good I don't notice a massive difference and I'm on a cold spell for aiming but whatever thank you for all the hard work man!
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 04:39 PM - 05/19/20
No problem :) And its not a huge increase in accuracy, but its still better than the last. Glad everyone is enjoying my setup
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Riotmaker91 on 02:21 AM - 05/20/20
No problem :) And its not a huge increase in accuracy, but its still better than the last. Glad everyone is enjoying my setup

Hello Sir,

So i see you updated the OP. Do you still use 60 and 40 for the AAEI and AAW or did you go back to 100?
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 06:40 AM - 05/20/20
I still use an aaw of 40, and a aaei of 60. However, this is up to personal preference 🙂 Also, since i updated the curve, a few people told me it felt odd. This is because the 1:1 curve reacts differently to aim assist then the old curves so it will most likely need adjustment from your old value.
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Addytoostrong on 11:33 AM - 05/20/20
Will be testing this out today. I currently run 4.5 sens 12k dpi on default. Smoothing is at 5 and I don't use an aux on widow. Interested to see how linear reacts to 12k and 3.2k dpi values as I use both. My scoped accuracy is 61% this season in 4 hours of gameplay. Crits are around 28% so expo has been working but a bit inconsistent. I'll post my results after I get used to it.
Out of curiosity could you calculate a sensitivity formula for finding my sens with the generic alpha? If I use 4.5 on 12k dpi what would that equal on the alpha st
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 12:07 PM - 05/20/20
Im not exactly sure. But the way i convert game senses is by lining up my mouse right next to my keyboard and slowly sliding it to the right to see where it lands. Then, once u use my config do the same thing n get it to land in roughly the same spot :)
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Addytoostrong on 01:48 PM - 05/20/20
I've played 2 games and I must say I'm really digging this config. Only issue is on widow at longer ranges and my flicking is off. But both take some time I suppose. Great job and ty for the response
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 02:27 PM - 05/20/20
Glad u like it :) I didnt fully test widowmaker, ashe and ana scope's because i assumed the aiming curves would be the same in this game (i ran for like 5 mins in training range testing ashe n widow and it felt fine but i didnt do any accuracy tests with it). If u continue using it n ur flicks still dont feel 1:1 please post something about it and let me know because if so, i can create an ADS curve for sniper's. Itd be great if i can get input from multiple sniper player's as well on this :) Also glad u like the configuration! I like trying to get my config's feeling as good as possible, so its great to see all the support backing my config's up and even saying their better than the official's!!!
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Addytoostrong on 03:30 PM - 05/20/20
I've ran multiple games as ashe and widow and it's just weird. I can track great and my ashe has improved. I'm using in game scoped of 61 no aux. Widow is different. I hit shots like crazy but it almost lifts my crosshair on flicks. For instance I've practiced my lateral flicks for years and can hit almost anything with a simple flick left or right but I'm finding my crosshair to rise slightly when doing so. That being said I don't think it's the curve but instead the aim assist interacting with the last part of the curve. Since flicking meets the turn cap pretty instantly maybe it's something on the tail end of the curve plus ows weird aa. Mid to close range is phenomenal. So amazing job. I feel like I might use this full time and you deserve credit where do. I'd almost pay for your time to test widows scope interaction. Do a custom mer game as on bots it felt amazing. Where can I send $20 lmao. Pm me
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Crunchee on 03:36 PM - 05/20/20
I've ran multiple games as ashe and widow and it's just weird. I can track great and my ashe has improved. I'm using in game scoped of 61 no aux. Widow is different. I hit shots like crazy but it almost lifts my crosshair on flicks. For instance I've practiced my lateral flicks for years and can hit almost anything with a simple flick left or right but I'm finding my crosshair to rise slightly when doing so. That being said I don't think it's the curve but instead the aim assist interacting with the last part of the curve. Since flicking meets the turn cap pretty instantly maybe it's something on the tail end of the curve plus ows weird aa. Mid to close range is phenomenal. So amazing job. I feel like I might use this full time and you deserve credit where do. I'd almost pay for your time to test widows scope interaction. Do a custom mer game as on bots it felt amazing. Where can I send $20 lmao. Pm me

Yesss you finally described what I could not with I felt like I was missing easy headshots on stationary target! What's your widow sense in game?
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Addytoostrong on 04:18 PM - 05/20/20
I mean I'm still popping in games but it feels better with 65 aaei and 30 aaw only on widow. I'm using 45 scoped on widow. I'm messing around with 2-7 smoothing jn xim app now.
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: De_Haos on 02:48 AM - 05/21/20
I mean I'm still popping in games but it feels better with 65 aaei and 30 aaw only on widow. I'm using 45 scoped on widow. I'm messing around with 2-7 smoothing jn xim app now.

Agree with you on aiming being more "consistent" when i was playing Ash and Zen. I could easly with one mouse swipe could turn around without hindering aim in the process.
Also i do agree with Linear-- 60 aei for mid range.

Previous version aim was a little floaty but seems to be fixed with a new curve.
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 07:37 AM - 05/21/20
Glad u guys are liking it :) My main focus with the entire method i came up with was basically meant FOR this game. I couldnt take it anymore lol, something had to change
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 07:43 AM - 05/21/20
Also sorry my apex curve isnt done yet. I spent all day yesterday building my first gaming pc and id like to play on that for a few days :) I will come back to making configs for u guys though
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Addytoostrong on 11:41 AM - 05/21/20
To give everyone an idea of how well this curve has worked 10 of my 20 matches on widow have been using this config. Heres my stats on a smurf in plat/diamond thus far.

https://www.overbuff.com/players/xbl/SR%20Gainz?mode=competitive
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Crunchee on 09:24 PM - 05/21/20
Just to check you're using 67.5 as your sense with the 3rd curve? Did you guys ever find a good SAB?
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 09:33 PM - 05/21/20
66.5* :) And i cant speak for others, but i havent messed with the SAB values at all and leave it on "Off"
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Crunchee on 09:50 PM - 05/21/20
66.5* :) And i cant speak for others, but i havent messed with the SAB values at all and leave it on "Off"

Alright I'll give off a whirl! Is 66.5 your 28cm/360?
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 01:26 AM - 05/22/20
Im not actually sure :) Last time i updated my sens was a while back.
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Boomboks on 06:01 AM - 05/22/20
I love your configs so much more than the default OW configs, but quick question.


The 4th curve (most recent) feesl less consistant to me. It's problematic at times and sometimes fails to track consistantly. Are you sure this 4th curve is really better than the 2nd curve?

Maybe I just like how the 2nd curve interacts with the aim assist, and the 4th curve really is more 1 to 1. But not only am I experiencing less consistancy in close range tracking with the 4th curve, I'm also noticing less consistant sniping flicks when it comes to ADS on Widow, as others have reported.
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 10:54 AM - 05/22/20
Yeah im sure the 4th curve is more 1:1. The way I test them is by going into a practice range with no bot's to enable aim assist, lining my mouse cursor up with a target and placing it right beside my keyboard, and flicking to the side at different flick speed's while moving it back towards my keyboard slowly. The closer u are to the end target when u touch the keyboard, the closer it is to a real 1:1, but this doesnt mean u need to use it :) I left all curve's up because i know this game has wonky aim assist setting's and many people liked how the old one's interacted with it.
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Crunchee on 09:36 AM - 05/23/20
Just checking in see if you guys made any changes to in game or xim settings? Addy you said you were messing with smoothing any luck with that?
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Addytoostrong on 09:40 AM - 05/23/20
I run smoothing on 5. Currently using 12k dpi with 19 sens. Feels really good. SAB and window size are the only things I seem to mess with while playing. I got rid of an AUX completely and it feels better. Takes a game or two but worth it. SAB is set to 90 right now. Still deciding on window size. I like 40 but also like 25 and 70. Lmao, so no help there, depends on your aim that day I suppose. I've had crazy games at 70 window and 60 aaei where I cannot miss anything if I tried. Then other times it's too heavy so I think I'm running 25-40 more than not.
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Crunchee on 09:56 AM - 05/23/20
Sweet man I'll try those today! I saw you replied to that reddit post as well I was going to haha.

Yeah I never used an Aux, 61.40 for Ashe in game and Widow/Ana 45.20
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Addytoostrong on 11:10 AM - 05/23/20
If you convert your sens to 12k dpi it's around 16.5. Idk how smoothing will react to lower dpi.. If you're using 3200 or so I'd start with 2 or smoothing. You can start with 5 but I really just like how it smooths out the quick movements and makes aa a bit more easy to handle.
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 11:05 AM - 05/24/20
Apex Config is out guy's. Sorry, I had some trouble's getting it to work with the advanced setting's, but I found linear was actually very close to linear so i posted a config for that instead :) I talk more about the process and all that in the config intro. Here is the link:

https://community.xim.tech/index.php?topic=87626.0
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Crunchee on 01:16 PM - 05/24/20
Apex Config is out guy's. Sorry, I had some trouble's getting it to work with the advanced setting's, but I found linear was actually very close to linear so i posted a config for that instead :) I talk more about the process and all that in the config intro. Here is the link:

https://community.xim.tech/index.php?topic=87626.0

Thank you for all the hard work I'll try it out tonight!
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 02:04 PM - 05/24/20
Most people voted for "Linear with 60aei" for the next overwatch config, so I will be doing that instead of using exponential :) This should result in just about the same thing, so once this curve is created I dont think the exponential curve will really have a use. I still have 1 more config to make before I create this curve though so it will still be a bit till it is out!
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: PJHudson on 03:18 AM - 05/25/20
Hi all, My Apex is arriving today, I'm going to try these setting right out of the box, I've read through thread a couple of times. I'm a little lost what aaei I should be using if I start off with the newest curve, It says 33 in the posts but the info at the start states 100?

Also does the 1.5 X/Y still apply, I'm coming from XIM 4 so looking forward to hopefully an improvement.

As always thanks for all your time Tank Main
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: PJHudson on 03:22 AM - 05/25/20
oh ignore me, AAei is always 33. it's everything else that is `100 . That seems crazy to me, but I'll take it for a ride before passing judgement.

I use practically every character, so hope it's usable for all :-)
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 07:55 AM - 05/25/20
Hey! Actually, the aim assist behaves differently with the final curve so i did drop my aim assist window to 40, and aim assist ease in to 60 since that felt better to me, but this is personal preference. Just make sure u have the curve copied, the in game sensitivity on 100 100, and use 100% scoped sensitivity. And then just make an aux for those character's :) I also know some people like using no aux and instead using the ingame setting to customize the sens. This means your flicks wont be as fast but it works better for some people lol
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: PJHudson on 05:10 AM - 05/26/20
Hey! Actually, the aim assist behaves differently with the final curve so i did drop my aim assist window to 40, and aim assist ease in to 60 since that felt better to me, but this is personal preference. Just make sure u have the curve copied, the in game sensitivity on 100 100, and use 100% scoped sensitivity. And then just make an aux for those character's :) I also know some people like using no aux and instead using the ingame setting to customize the sens. This means your flicks wont be as fast but it works better for some people lol

Ok great, I'll copy it over and not use an Aux to begin with, I've got to transfer all my button mappings over from Xim 4, I'm not looking forward to it as this stuff doesn't come naturally to me. Atm on Xim 4 I use a mixture of Linear and expo for (hit scan) and hot key it. Hoping these linear setting work for McCree and Soldier as I play these the most
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 10:55 AM - 05/26/20
This curve works well on every character so u wont need to swap :) Also, when i was talking about the auxes, i meant auxes for aim down sights (like widow scope, ana, and ashe)
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Boomboks on 01:03 PM - 05/27/20
Not to rush you or anything, but do you have a rough timeline for when the new 60 ease in config will be ready? I'm excited for it.

I decided to go back to the official exponential config and I found more success with it, even at close range. Even though it has that stutter/jitter, I guess I like the aim assist interaction better.

I'm hoping the 60AEI config will be the best of both worlds and will feel like exponential but without the stuttery feeling
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 01:25 PM - 05/27/20
No, I dont have a set plan for the 60aaei curve. I never planned on making so many configuration's for game's. I planned on getting the guide out, and having a few configuration's for examples on what my method feels like in game's. It take's like at the very least 4 hours to create a single curve, and thats if i rush it and since I dont play on console very much anymore, I stopped making these config's for a while. If anyone want's these sooner or wants a curve for a new game, go ahead and follow my guide :) Thats why i wrote it lol, I dont plan on fixing every game for people or doing any of that... I just wanted to get the info out so people can do it themselves.
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Boomboks on 01:38 PM - 05/27/20
Gotcha, that's okay. It looks really daunting and complicated to me, maybe someone else will take up the challenge or I'll give it a try myself
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 04:27 PM - 05/27/20
Od1n was talking about making a video on it but im not sure if he will decide to. I think having a video showing the process would make it easier, but I have no way of making a video so the best thing i could do was provide screenshot's and a guide lol
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: DaTz on 05:55 PM - 05/27/20
im assuming this doesnt work on pc? put in all your settings and its pretty bad ... also cant adjust assist settings on pc it seems
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 05:58 PM - 05/27/20
Yeah, pc doesnt allow aim assist with controllers on overwatch i think.
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: DaTz on 06:44 PM - 05/27/20
Yeah, pc doesnt allow aim assist with controllers on overwatch i think.

@#$% wish i could get the mouse movement to be smooth atleast with linear
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: De_Haos on 06:40 AM - 05/28/20
Ana on the other hand feels like sen is too much, while ads is fine, look sen is too much and it is difficult to land sleep darts.
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 11:47 AM - 05/28/20
Hmm? Do u have ur in game setting's right on ana? If you change the specific character setting's, sometimes the character does not get updated with the new setting's so try going to ana in the option's and changing her?
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Biotic Sight on 01:42 PM - 05/28/20
Yo bro srsly this config is the best frs they feel so much better than the official overwatch ST lol thank u so much! I've been having trouble with overwatch settings for like a year cuz of how bad the aim assist is but with this @#$% bro I'm set lol thanks again bro  :D
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Maria on 02:30 AM - 05/29/20
Yo bro srsly this config is the best frs they feel so much better than the official overwatch ST lol thank u so much! I've been having trouble with overwatch settings for like a year cuz of how bad the aim assist is but with this @#$% bro I'm set lol thanks again bro  :D

What system?
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: PJHudson on 06:32 AM - 05/31/20
I run smoothing on 5. Currently using 12k dpi with 19 sens. Feels really good. SAB and window size are the only things I seem to mess with while playing. I got rid of an AUX completely and it feels better. Takes a game or two but worth it. SAB is set to 90 right now. Still deciding on window size. I like 40 but also like 25 and 70. Lmao, so no help there, depends on your aim that day I suppose. I've had crazy games at 70 window and 60 aaei where I cannot miss anything if I tried. Then other times it's too heavy so I think I'm running 25-40 more than not.
Hey dude, hope you are well, do you use smoothing 5 for all heroes or just Widow?

Cheers
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Xenar on 09:50 AM - 06/01/20
This feels so much better than the main ST, great work
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: PJHudson on 04:44 AM - 06/02/20
Hi people who know stuff, I'm using this config and it's great, but I've just copied the in game settings for every hero.
so atm I'm at

Sens 100
AAW 40
AAEI 60
AEI 33

 I used to adjust them for each hero based on things I'd read.
so my question, with this config I find i have to lead my shots a lot more with heroes like Orisa. what setting should I move around to try and make this feel a bit better?

Thanks in advance
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Boomboks on 08:21 AM - 06/02/20
Hi people who know stuff, I'm using this config and it's great, but I've just copied the in game settings for every hero.
so atm I'm at

Sens 100
AAW 40
AAEI 60
AEI 33

 I used to adjust them for each hero based on things I'd read.
so my question, with this config I find i have to lead my shots a lot more with heroes like Orisa. what setting should I move around to try and make this feel a bit better?

Thanks in advance

If you're saying that you're having difficulty leading your shots, increasing the aim assist window size for that hero will give you more room inside the window to lead shots. Try a value of 70 or 80 instead of 40
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: PJHudson on 09:03 AM - 06/02/20
Hi people who know stuff, I'm using this config and it's great, but I've just copied the in game settings for every hero.
so atm I'm at

Sens 100
AAW 40
AAEI 60
AEI 33

 I used to adjust them for each hero based on things I'd read.
so my question, with this config I find i have to lead my shots a lot more with heroes like Orisa. what setting should I move around to try and make this feel a bit better?

Thanks in advance

If you're saying that you're having difficulty leading your shots, increasing the aim assist window size for that hero will give you more room inside the window to lead shots. Try a value of 70 or 80 instead of 40

Thanks brotha, I will give this a go, I think i just have to get used to it, but whatever setting I used to have it felt a bit easier
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: hmmwyut on 09:54 PM - 06/03/20
Anyone have the ps4 equivalence? Would greatly appreciate it.
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: De_Haos on 08:18 AM - 06/04/20
Hi people who know stuff, I'm using this config and it's great, but I've just copied the in game settings for every hero.
so atm I'm at

Sens 100
AAW 40
AAEI 60
AEI 33

 I used to adjust them for each hero based on things I'd read.
so my question, with this config I find i have to lead my shots a lot more with heroes like Orisa. what setting should I move around to try and make this feel a bit better?

Thanks in advance

LOL i also have AEI set to 33. What a coincidence. I also noticed that if you lower your AEI to like 10 or 12 (or below 30) you will spin like a motherfuka and you will not be able to aim properly cause it is set on high sen.
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Trshy on 09:11 AM - 06/04/20
Anyone have the ps4 equivalence? Would greatly appreciate it.

i am interested in this as well, any kind soul out there who can make a ps4 compatible curve.? thanks.
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 01:21 AM - 06/05/20
Hey everyone! Sorry I havent posted any updates in a while. I would like to say that I have started playing on pc and dont want to switch back to console anytime soon. This means i wont be playing with my xim much, and there will probably be no more new curves from me anytime soon. Ive just dedicated so many hours to this project and I dont have the energy to continue anymore. I have a guide on how exactly I create these curve's, so anyone is welcome to continue making configs if they want to. Thanks for all the support guys, hope you understand! :)
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: jerrylee on 11:50 AM - 06/05/20
If I have some time, I'll try to make the curve for PS4 using the guide this weekend.

But I want to ask you guys that have a PS4 a favor.

Following the guide, I've started to make some tests here and I've noticed when I spin with 100% walk speed things go fine, but if I go down that percentage, let's say, 30% like in the guide, the crosshair starts to go up with each spin. I'll make a video to demonstrate better and edit this message with it.

Could anyone try to spin in place and see if the crosshair goes up with 30% walk speed? I recommend the same place in training mode as in the guide.

Edit:
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Boomboks on 05:53 PM - 06/05/20
Hey everyone! Sorry I havent posted any updates in a while. I would like to say that I have started playing on pc and dont want to switch back to console anytime soon. This means i wont be playing with my xim much, and there will probably be no more new curves from me anytime soon. Ive just dedicated so many hours to this project and I dont have the energy to continue anymore. I have a guide on how exactly I create these curve's, so anyone is welcome to continue making configs if they want to. Thanks for all the support guys, hope you understand! :)

The process is too complex for me and I was really looking forward to the 60AEI config you announced. But
that said, you did a ton for the community, more than we can expect out of just one person. Still using your 33AEI config and recommending it to people. Thanks for your contributions :)
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 08:56 PM - 06/05/20
If I have some time, I'll try to make the curve for PS4 using the guide this weekend.

But I want to ask you guys that have a PS4 a favor.

Following the guide, I've started to make some tests here and I've noticed when I spin with 100% walk speed things go fine, but if I go down that percentage, let's say, 30% like in the guide, the crosshair starts to go up with each spin. I'll make a video to demonstrate better and edit this message with it.

Could anyone try to spin in place and see if the crosshair goes up with 30% walk speed? I recommend the same place in training mode as in the guide.

Edit:

Yeah, ive experienced this problem in a few xbox titles as well :) Check that ur "simulate analog behavior" is ticked to "OFF" because even at "0%" it will still be activated and mess with the results. U get it to the "OFF" position by clicking 1 more time to the left after 0%.
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 09:07 PM - 06/05/20
Also, I know the guide says 30%, 60%, and 90% stick tilt (or something like that to get a base curve), but this game does not have a strait parabola meaning ur going to need more data points to get an accurate result :) for comparison, I used 20% all the way up to 100% in increments of 5% (like 20, 25, 30, 35% ...) to get an accurate curve, and then worked on the areas that didnt have as many data points. Depending on how much time u have, u can use either more or less data, but more data will give a more accurate result :)
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 09:08 PM - 06/05/20
You can pm me if u have any questions, and ill be willing to help in any way i can :)
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: jerrylee on 07:07 AM - 06/06/20
Yeah, ive experienced this problem in a few xbox titles as well :) Check that ur "simulate analog behavior" is ticked to "OFF" because even at "0%" it will still be activated and mess with the results. U get it to the "OFF" position by clicking 1 more time to the left after 0%.

Man, I swear to you that yesterday before sleep I've thinked about that!
I'll try to put SAB to OFF today.

I'll try to make the curve with increments of 5% like you suggested and if I need some help I'll sure pm you. Thanks!

Update: SAB was set to OFF, it is in the guide.  :( So the problem persists.
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 11:17 AM - 06/06/20
Hmmm, well thats never happend to me before while SAB was turned off so thats odd? I wonder if its coded in the game for some reason on ps4  ??? Well, I wonder if on every stick tilt value, the cursor goes up at the same ratio, u may be able to still get pretty accurate results since EVERY value will go up. U could try choosing a starting target thats pretty low on the ground, and then choose a target thats kind of high up as ur end target so then u still have to do quite a bit of spins to get accurate results. Im not sure if this will work though, because if the vertical stick tilt goes at the same speed through all of the stick tilt values, when using lower stick tilt values ur cursor will go up a lot faster than it will on a high stick tilt value.
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 11:28 AM - 06/06/20
If i were you, id try recreating the configuration? Use "Generic Alpha", turn your sab completely off, and then I also take the extra precaution of turning my xim sensitivity to 0, setting the whole xim curve to 0, and turning my xy ratio to 0. I also turn my boost to 0, then i bind my look stick to my arrow keys, and then bind the right sticks "walk" key to my right arrow key. Im not sure if this will help, but its worth a try? I do all this because i dont wanna accidentally slide my mouse and mess up the translation lol
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 11:35 AM - 06/06/20
Also, check that ur in game sens is set to 0 on both vertival and horizontal sensitivity? And adjust ur in game settings to linear with 33aei or whatever in game settings u wanted to use for config? Can u try these and tell me if the problem still persists?
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: jerrylee on 01:03 PM - 06/06/20
Hmmm, well thats never happend to me before while SAB was turned off so thats odd? I wonder if its coded in the game for some reason on ps4  ??? Well, I wonder if on every stick tilt value, the cursor goes up at the same ratio, u may be able to still get pretty accurate results since EVERY value will go up. U could try choosing a starting target thats pretty low on the ground, and then choose a target thats kind of high up as ur end target so then u still have to do quite a bit of spins to get accurate results. Im not sure if this will work though, because if the vertical stick tilt goes at the same speed through all of the stick tilt values, when using lower stick tilt values ur cursor will go up a lot faster than it will on a high stick tilt value.

Yes, I'm almost sure that it will not work either.

Quote
If i were you, id try recreating the configuration? Use "Generic Alpha", turn your sab completely off, and then I also take the extra precaution of turning my xim sensitivity to 0, setting the whole xim curve to 0, and turning my xy ratio to 0. I also turn my boost to 0, then i bind my look stick to my arrow keys, and then bind the right sticks "walk" key to my right arrow key. Im not sure if this will help, but its worth a try? I do all this because i dont wanna accidentally slide my mouse and mess up the translation lol

In the update of my post earlier I'd already tried all of that. I've even tried to change things that I know won't matter like the keyboard and the PS4 pad. I've tried to create a "Generic Beta" too, same results.

Quote
Also, check that ur in game sens is set to 0 on both vertival and horizontal sensitivity? And adjust ur in game settings to linear with 33aei or whatever in game settings u wanted to use for config? Can u try these and tell me if the problem still persists?

Here are the configs I'm using, I think there's nothing wrong:

(https://i.imgur.com/fjsZ1Sxl.jpg)(https://i.imgur.com/hC6AG2Dm.jpg)(https://i.imgur.com/pYZKwAMm.jpg)

The curve is on default but I've already tried to flatten it.

Maybe I'll get it to work if I manually press the down key rapidly every couple of spins to adjust the height.  ???
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 01:16 PM - 06/06/20
Maybe it would work but im not 100% sure? I wonder why it does that on the ps4 version but not the xbox version ??? I think rapidly pressing down might fix the issue, as long as the horizontal speed stays the same and the vertical speed doesnt change it? Or even if it does alter the curve slightly, the curve might still be accurate enough to use and would probably be hard to notice actually in a match. One thing I thought of to test whether or not its actually coded ingame or not is to try moving the xim curve to "30%" on both sides so the curve is a strait line across y axis 30. Then, turn your smoothing and steady aim to max and move your mouse to the right as slowly as possible. This will give u completely horizontal movement that will always be at 30% stick tilt as long as ur moving the mouse, and u can see whether or not the cursor moves up while doing this test. If it moves up, then its probably a game issue that we cant fix with any xim settings, but if it doesnt move, maybe its a xim firmware issue and maybe u can try going back to a earlier release? Im not sure which version im running but i can check if this is the case :)
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 01:18 PM - 06/06/20
Because i know many people have problems with the "simulate analog behavior" option, I wonder if maybe they messed something up if ur running a newer version?
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: jerrylee on 01:23 PM - 06/06/20
I've turned on "legacy sticks" in the game. It puts the spin on the left stick instead of the right one and it worked.  :o No crosshair going up!  ;D

I don't know if it will mess something up.  :-\
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 01:27 PM - 06/06/20
I dont see why it would :) Thats a good idea! I should add that in my guide lol :D Nice job man!
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 01:29 PM - 06/06/20
Also, I know many people get confused on the desmos part. If u feel like u cant do it, u can pm me all the data u got and I can try to actually plug all the data in to make ur curve if u cant do it :) Its just the part of going in game and counting spins that was getting really annoying for me, I dont mind plugging in the calculations for u though if u need the help or want the help lol
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: jerrylee on 11:11 AM - 06/07/20
Ok, guys, finished the curve for PS4:

>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:hAKGCoeDiMeJ6IrYi66MmY2Mjl2PGY/OkJmRa5I1kvmTtJRalPaVi5YolsOXXZfrmHKY9Zl1mgiaoptGm+KcfZ0YnaqeMp61nzMfyKBdoP+hlaIdoqCjH6PrpJmlMqW6pjemqycQ:X5BC
<<< XIM APEX END COPY <<<

It was made with 33 "aim easy in" and "linear" in the game settings.

@GoodAimButATankMain : Thanks for all the support you gave me while I was making the curve. You are the best! Feel free to add it to the first topic if you want.
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: hmmwyut on 05:55 PM - 06/07/20
Thank you for all your hard work GoodAimButATankMain & jerrylee.
Title: Re: *FINAL UPDATE* (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: kaiju on 06:13 PM - 06/07/20
Ok, guys, finished the curve for PS4:

>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:hAKGCoeDiMeJ6IrYi66MmY2Mjl2PGY/OkJmRa5I1kvmTtJRalPaVi5YolsOXXZfrmHKY9Zl1mgiaoptGm+KcfZ0YnaqeMp61nzMfyKBdoP+hlaIdoqCjH6PrpJmlMqW6pjemqycQ:X5BC
<<< XIM APEX END COPY <<<

It was made with 33 "aim easy in" and "linear" in the game settings.

@GoodAimButATankMain : Thanks for all the support you gave me while I was making the curve. You are the best! Feel free to add it to the first topic if you want.

These settings are smooth as hell ima play some high rank comp and get back to you but they feel great. Thanks to you, and TankMain
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Aguy44 on 09:29 PM - 06/07/20
Hello, do I need to have "SAB" off or on "0" for the config?
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 10:51 PM - 06/07/20
I have sab turned off, but u can experiment :)
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Lowkeeloki on 04:39 AM - 06/08/20
Which one do I copy for ps4? You have two on the updated config on the first page and then jerrlees on this page, also do I adjust the sens normally or with the ballistic editor? As I dont know how to use the ballistic editor even after the YouTube tutorial, thanks
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 10:20 AM - 06/08/20
jerrylee's curve is almost the exact same as mine, exept at the last 2 or 3 points their a tiny bit higher than my curve. I made the same curve to make sure lee did it correct and he did it all perfectly :) He just made a tiny mistake on the last few points so it is a tiny, tiny ammount off. I think mine is technically more accurate than his, but I dont think you would ever notice a real difference between the 2 curves so you can use any of them. Jerrylees curve he posted here is the same as the first page as well, so their the same. Also, Adjust ur sens using the xim sensitivity, not the curve :)
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: jerrylee on 11:50 AM - 06/08/20
I've played yesterday 2 hours with each curve, mine original and GoodAimButATankMain's version and I didn't feel any difference. But... he is way more experienced than me on this so I'll keep using his version.  :)

Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 05:16 PM - 06/08/20
Yeah we used all the same points so the curves are nearly identical :) Its just the very last part on the curve, you messed up the "once u pass the 3rd point, delete the data and use the next point to copy the data" and insteaf of using the next data point, u used the next 3 data points at the same time to make the final bit of the curve. The difference is not noticable at all really though, just a little slip up lol :)
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: kaiju on 08:12 PM - 06/08/20
Alright I've been using this on PS4 for last day or two, and I like it. It's a little fast dunno if turning down the sense messes anything up, but I find it alot easier to track targets as a soldier or mccree makes killing pharahs easier. I played on an account that is 4058
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 09:37 PM - 06/08/20
Turning your sens down doesnt change anything
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: ssjgohan on 12:23 AM - 06/09/20
I haven't played Overwatch in a while so I may just need to get accustomed to the aim assist strength again but is the aim assist supposed to be this strong? I can hardly move my crosshair in the bubble. There is extreme slowdown when you target an enemy. Is this normal? This is how the config feels for everyone else? I'm on PS4 btw. Just making sure I'm not doing anything wrong.
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 08:28 AM - 06/09/20
I felt this on xbox too. The movement is really close to 1:1, where the normal ST isnt. This makes it interact with the aim assist differently than the main ST, if its too strong just lower it :) But i suggest u keep the strength max and try to mess with your window size and aim assist ease in, then decrease the strength as a last resort.
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Addytoostrong on 08:34 PM - 06/10/20
Definitely mess with window size over any other setting. The Xbox curve made me realize that low window size like 20 actually feels stronger than a window of 70. Because when inside the window you still hit the turn cap and are limited. A mouse swipe will never be able to handle aim assist because the swipe is emulating stick tilt. And there's no way to swipe consistent enough to match a stick tilt of the same value. So window size effects more than just when it kicks in. It also effects how strong the aim assist grabs. Test it out on a target at long range with flicks. Far easier to flick on low window and its more magnetic where high window causes just a larger window of inconsistent movement.
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 09:26 PM - 06/10/20
Definitely mess with window size over any other setting. The Xbox curve made me realize that low window size like 20 actually feels stronger than a window of 70. Because when inside the window you still hit the turn cap and are limited. A mouse swipe will never be able to handle aim assist because the swipe is emulating stick tilt. And there's no way to swipe consistent enough to match a stick tilt of the same value. So window size effects more than just when it kicks in. It also effects how strong the aim assist grabs. Test it out on a target at long range with flicks. Far easier to flick on low window and its more magnetic where high window causes just a larger window of inconsistent movement.

Exactly. But the aim ease in can affect when the aim assist actually starts kicking in so its good to mess with both to your liking :) The way the aim assist ease in works if no one knows is the higher the value, the closer to the target the aim assist will start kicking in harder. For example, if u use 100 aim window, and 0 aim assist ease in, the second ur crosshair touches the aim window you will have 100% aim assist strength, but if u use 100 window and 100 aim assist ease in, the aim assist strength will be really weak the second u hit the window, and slowly ramp up till ur on target to max strength once u hit the target. Its good to find a good balance between the 2 so your flicks are still pretty consistent, but u also keep good tracking when needed :) Good example is hanzo, where sometimes u track, and sometimes u flick.
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: BeeDee on 01:20 AM - 06/11/20
These settings are FIRE! Only got to play for about an hour after getting the config set up but I could already tell how much of a difference this config felt to the one I was using. Thanks for sharing!
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Lowkeeloki on 11:20 AM - 06/11/20
Can I actually get the ps4 config please, DPI, INGAME settings and xim settings, I understand I only have to download the ballistic editor curve but what about the rest of the settings??
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 01:02 PM - 06/11/20
The in game settings are the exact same as my xbox config :) The xim settings are completely personal preference though. However, I do think that using any boost will mess with the 1:1 feel so id suggest not using boost, but u can certainly try it :)
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Malinkadink on 12:31 AM - 06/16/20
Trying out these settings now after not playing for a year or so. Not bad so far.

One thing i'd recommend for the ADS heros (ana,widow,ashe) turn scoped sensitivty to 100% and use AUX in the XIM. Take your base sensitivity value and multiply it by 0.614 for Ashe and 0.452 for Ana/Widow. The game uses a FOV of 93
on console and to get as close to 1:1 while scoped you use those values.

You can check it here:
https://jscalc-blog.com/overwatch-zoom-sensitivity-calculator/
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 04:16 AM - 06/16/20
Yup, exactly what i do too. You can try using the hero sensitivity multiplier in game instead since I think it would offer a bit more accuracy (i know some widow players did this a while back), but u will be giving up the faster flick speed for it and it might make flicking up close challenging. I tried both, and found using the xim aux was better for me personally since it fit my playstyle (aggressive flank style), but if ur more of a sniping widow sitting in the back then u might find the in game scoped sens to be better. I suppose if u really wanted to, u could use some math to find a good middleground value using the aux and ingame sens multipler combined, that way u could keep relatively fast flicks while gaining a bit of accuracy :) This probably most likely isnt needed though, just throwing it out there if anyone wants to try it!
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Boomboks on 05:02 PM - 06/16/20
Yup, exactly what i do too. You can try using the hero sensitivity multiplier in game instead since I think it would offer a bit more accuracy (i know some widow players did this a while back), but u will be giving up the faster flick speed for it and it might make flicking up close challenging. I tried both, and found using the xim aux was better for me personally since it fit my playstyle (aggressive flank style), but if ur more of a sniping widow sitting in the back then u might find the in game scoped sens to be better. I suppose if u really wanted to, u could use some math to find a good middleground value using the aux and ingame sens multipler combined, that way u could keep relatively fast flicks while gaining a bit of accuracy :) This probably most likely isnt needed though, just throwing it out there if anyone wants to try it!

This is also a good method if you want to have widow and ashe on the same aux. Set the aux to 0.614 of your hip sens, and then go in game and lower the widow scope sens to 73.6%. You wont be able to flick as fast on widow but your ashe and widow sens will feel close to 1:1 on the same aux
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Malinkadink on 06:55 PM - 06/16/20
I think its easier to just have multiple configs in xim. I use the F keys to swap between configs and just color code them ie purple xim lights = widow/ana, red = ashe
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 03:10 AM - 06/17/20
I think its easier to just have multiple configs in xim. I use the F keys to swap between configs and just color code them ie purple xim lights = widow/ana, red = ashe

This can work too, but the disadvantage to this is u need the app open to swap config's, and if u have many config's it could get confusing trying to swap between them. If u dont mind swapping config's, then u can do this, but if u get annoyed with it or if u flex and play multiple different heros, it can be easier just to have a sniper contig, and a normal config that will work with everyone :) All down to personal preference.
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 03:13 AM - 06/17/20
Yup, exactly what i do too. You can try using the hero sensitivity multiplier in game instead since I think it would offer a bit more accuracy (i know some widow players did this a while back), but u will be giving up the faster flick speed for it and it might make flicking up close challenging. I tried both, and found using the xim aux was better for me personally since it fit my playstyle (aggressive flank style), but if ur more of a sniping widow sitting in the back then u might find the in game scoped sens to be better. I suppose if u really wanted to, u could use some math to find a good middleground value using the aux and ingame sens multipler combined, that way u could keep relatively fast flicks while gaining a bit of accuracy :) This probably most likely isnt needed though, just throwing it out there if anyone wants to try it!

This is also a good method if you want to have widow and ashe on the same aux. Set the aux to 0.614 of your hip sens, and then go in game and lower the widow scope sens to 73.6%. You wont be able to flick as fast on widow but your ashe and widow sens will feel close to 1:1 on the same aux

Also, if anyone is wondering how he came up with 73.6%, you simply divide the widow 1:1 sens (.452), by the ashe 1:1 sens (.614), which gives you .736, or 73.6%. If any new scoped heros come out in the future, u can use this same thing again to find what the relative aim sensitivity is suppose to be :) This means that when using 100% ashe relative aim sensitivity, and an aux set to .614 your normal sensitivity, u can swap to widow using the SAME aux and still keep the 1:1 movements as long as your widow relative aim sensitivity is set to 73.6% (this also works with ana, since widow and ana have the same exact scope movements)
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Addytoostrong on 06:01 PM - 06/17/20
In theory the same aux for widow and ashe makes sense. However, without a delay you'll have awkward interactions every now and then. Delay for widow is 330ms and delay for ashe is 250ms. Would this interfere?
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Addytoostrong on 06:08 PM - 06/17/20
Also, read something showing high aaw with high aaei being a new thing in linear especially. 100 aaei feels trash in 20 window but because the aaei doesn't have time to do what its meant to in such a small window. I plan on experimenting with 70 aaw and 100 aaei tomorrow morning to see the results. Right now 20 window with 60 aaei seems to feel good then it starts to have issues on consistency. Showing what we've all known. I don't think the xim or set up is ever the issue, the issue is ow aim settings.. having 5 different options and each option changing the aim assist so much, I bet even the developers don't know the amount of holes or issues within their own system. On controller I was still a top widow on Xbox but I remember even then some days high aw and some low aw. Now worth aaei out adds just another layer on top of an already flawed layer of settings. Idk why instead of making set AA windows and just allowing us to adjust strength, they just continued to add more settings.
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 06:12 PM - 06/17/20
Yeah, the deactivation delay can be wierd, but u can get used to it imo. And i think adding more setting's is always a good thing in my opinion as long as people have the time to adjust them.
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Malinkadink on 08:50 PM - 06/17/20
I think its easier to just have multiple configs in xim. I use the F keys to swap between configs and just color code them ie purple xim lights = widow/ana, red = ashe

This can work too, but the disadvantage to this is u need the app open to swap config's, and if u have many config's it could get confusing trying to swap between them. If u dont mind swapping config's, then u can do this, but if u get annoyed with it or if u flex and play multiple different heros, it can be easier just to have a sniper contig, and a normal config that will work with everyone :) All down to personal preference.

No need to have the app open, on the first config page you can set a hotkey to swap to that config on the fly i use the F1-F12 keys for this.
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 09:39 PM - 06/17/20
Hmm, maybe im doing something wrong then? I have a samsung galaxy s8, and i have the same hotkeys too, but it only swaps when i have the app open.
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Malinkadink on 10:27 PM - 06/17/20
Hmm, maybe im doing something wrong then? I have a samsung galaxy s8, and i have the same hotkeys too, but it only swaps when i have the app open.

Could be it, i have an iphone 11 and i just have the xim manager in the background and it works fine. Maybe check your background app refresh settings, if the app isn't allowed to update while its in the background that could be it.
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Addytoostrong on 01:57 AM - 06/18/20
You have to make sure you close out of the app or disconnect Bluetooth before it will swap automatically. So you have to open your previous apps and hit close on it. If you just hit home and BT is connected it won't swap.
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Crunchee on 08:53 AM - 06/18/20
Can everyone post their in game and xim settings? Idk what's going but something for sure changed and my aim with even Ana is horrible now.
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Addytoostrong on 09:09 AM - 06/18/20
I played all morning with expo ramp and legacy mode on. I think I'm just done with aim ease in and rather keep it at 50 or off all together. I was popping on widow and ashe with legacy mode. Who knows anymore.

I also ran the linear with 70 aaw and 70 aaei. Felt really good. But thats on xbox.
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 10:41 AM - 06/18/20
Yeah, expo ramp might be better with snipers because u get better micromovements but with the normal ST's the movements arent 1:1 so it feels wierd to me. Maybe someone would be willing to make an expo curve next using my method, i could do it but im not sure if ill go back to creating them or not since i rarely play console anymore.
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: b1gr1ch on 03:22 PM - 06/18/20
Id honestly pay you to make an expo one. Your ST is so good man
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Addytoostrong on 03:26 PM - 06/18/20
Thats what I'm saying let's get it going! You can't just leave console behind like that, remember where your heart always will be lmao.
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 05:52 PM - 06/18/20
Idk guys lol, maybe i will depending on how many people would want it... Its a lot of work just for a couple people to use. Its not that i dont want people to have a good setup, its just the ammount of time and work id put in just for a little increase in mouse movement might not be worth it.
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Lowkeeloki on 06:12 PM - 06/18/20
Please make an expo one 🥺
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Crunchee on 07:12 PM - 06/18/20
I vote yes!
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 08:32 PM - 06/18/20
Ill think about it, in the meantime im going to make a poll asking how many people will use it to see if itll be worth it.
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 11:27 PM - 06/18/20
Hey guy's, so I think ill create the expo ramp config... but should i create it with linear ramp and an aei value like this config, or just use expo ramp? Also off topic, but I just created a new youtube channel to post good clips and stuff i get! I havent posted anything yet, and probably wont be posting much since i dont play console much anymore, but here's the channel if you guys wanna check it out and read the description, id really appreciate it! :)

https://www.youtube.com/channel/UCeFZX4ht4zxyo7nT3ueQPjw/about
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: b1gr1ch on 12:00 AM - 06/19/20
You the man! Subbing now!
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Boomboks on 12:01 AM - 06/19/20
Hey guy's, so I think ill create the expo ramp config... but should i create it with linear ramp and an aei value like this config, or just use expo ramp? Also off topic, but I just created a new youtube channel to post good clips and stuff i get! I havent posted anything yet, and probably wont be posting much since i dont play console much anymore, but here's the channel if you guys wanna check it out and read the description, id really appreciate it! :)

https://www.youtube.com/channel/UCeFZX4ht4zxyo7nT3ueQPjw/about

This is the best news I've read all day, I'm so glad you've decided to make this config. I'm really grateful for the work it'll take, I'll definitely subscribe to your youtube!

My vote is exponential, it seems like the more popular option of the two base configs even with it's aim assist issues. So I'd be curious if an exponential curve using your method would solve the weird aim assist issues along with the microstutter.

But you're the expert so I'd trust your judgement. Maybe using linear with a high AEI value would be virtually the same but with even less risk of aim assist issues since linear tends to have less of that.

All I know is that I love your curve, and I think a version with a little more microadjustment would be perfect for me on Soldier/Widow
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 12:05 AM - 06/19/20
Thanks guy's!!! Look's like a lot of people want exponential :) I could always create the expo ramp for people, and then if its not good enough i could maybe try creating a linear ramp with high aei? Idk, but ill start working on it when i can! Im busy for a bit, so dont expect it to come out super soon, but ill try to get it at least started in the next few day's for everyone. Ill keep my main "game config" page updated with the progress :)
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: PJHudson on 01:54 AM - 06/19/20
Will any of these configs stop me having a Genji who now thinks he is invincible on my team ?
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Malinkadink on 02:59 AM - 06/19/20
Just a PSA to anyone that may not know but the ease in setting is really reserved for linear ramp only. Back when it came out linear ramp had a weird deadzone and ease in was added like a band aid fix to it where around 30 ease in would eliminate that deadzone at the start of the stick tilt.

Testing it now however on xbox i can't tell a difference, so maybe the deadzone was fixed, or its more noticeable on ps4 because of the 8 bit vs 16 bit analog stick resolution difference between the consoles. Either way I wouldn't play with ease in at all unless on linear ramp.

For aim assist ease in a setting of 0 SHOULD behave like legacy mode on. AAEI just adjusts the stickiness of aim assist depending on how well you're tracking some target. At a setting of 100 if you are tracking a target well you'll feel the great amount of that stick provided your AA strength is also high. Technically 100 AAEI would benefit flick heroes best because as you flick towards a target AA stick will ramp up to the maximum as your flick approaches the target and will stop your crosshair on target so you can shoot. Lower AAEI is better for tracking heroes like tracer since you want to have your aim be glued to whatever you're targetting.

In short theres no perfect setup especially since the real perfect setup would be individual settings for certain characters because of how they all play, but that brings a problem of lack of consistency getting used to one sensitivity like how it is on PC where you just run one sens for everyone. Between linear, expo, and dual zone, DZ was the first and i think most players stuck with that. It does lend itself well for the widest variety of characters because it gives you precision in the 0-90% stick tilt range and higher turn speed at the last 10%. This is of course talking about controller users.

For XIM it becomes more complicated, but aside from custom generic configs I'd say expo is probably the best when you set it up to really lean into exploiting the aim assist in this game, which you really should try to do. I can't think of any other game that feels worse using a xim than Overwatch, where disabling AA entirely just handicaps you as a player, where other games that feel much more like the PC versions of the game can be played fine with or without AA depending on preference.
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 02:27 PM - 06/19/20
Okay guys, so my plans actually got cancelled for the day so i will probably spend the day getting data for the expo curve. You can expect it to come out tomorrow probably! I will post a link to the expo config under this config after i make the post. :)
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Crunchee on 02:33 PM - 06/19/20
*excited face*!
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 05:57 PM - 06/19/20
UPDATE:
Spent the last hour and a half or so getting data points. I only managed to get around 7 data points, tried to make a curve using that data, and it wasnt good enough to release or use in a real game. I will work on getting more data for the curve soon, but i think ive had enough today :) If you would like to support me, check out my youtube's "about me" page for more info. Link is in my bio ;) Also, im really glad you guys enjoy these curves i make. It feels great knowing people are enjoying their games again cuz of the work i did. Ill try to have this curve out in the near future for everyone!
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Crunchee on 07:21 PM - 06/19/20
I will for sure drop you a sub, you're the best thanks for not giving up on us!
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 04:32 PM - 06/20/20
UPDATE:
Spent the last hour and a half or so getting data points. I only managed to get around 7 data points, tried to make a curve using that data, and it wasnt good enough to release or use in a real game. I will work on getting more data for the curve soon, but i think ive had enough today :) If you would like to support me, check out my youtube's "about me" page for more info. Link is in my bio ;) Also, im really glad you guys enjoy these curves i make. It feels great knowing people are enjoying their games again cuz of the work i did. Ill try to have this curve out in the near future for everyone!

So, i think the curve is going to take longer to create than I thought. I spend 2 hours and 30 minutes yesterday getting new, accurate data for the curve (spent 5 mins spinning on each data point), and the data was only able to make about half of the curve. But, when i tested this data, it still wasnt completely 1:1 so I will need to go back and add even more data to get the curve good enough to release. My guess is itll probably take around at least 4 more hours of me testing to get the curve good enough. Ill keep you guys updated on how the curve is going while i make it, but i dont have 4 hours to spare all at one time so i will have to keep working at little bits of the curve till it is complete.
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 05:02 PM - 06/20/20
Also, I think the xim forum's layout makes it kind of hard to organize all my work and stuff since you have to bounce through links. What i think im going to do is create a discord server so all my info is in one place and everyone can hang out there if they want! :) That should help everyone find what their looking for lol! Ill try to create one today and set it all up!
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 06:32 PM - 06/20/20
Hey guy's! Here is my discord server link. I will still respond on the xim forum for everyone who does not have discord, but I will probably spend more time on discord than on the xim website so this is the place if you want to get fast feedback! :) Also, im not quite sure I set it all up 100% correctly so itd be great if you guys could let me know if I need to change anything or add anything.

https://discord.gg/tbuD8RP
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: Addytoostrong on 08:02 PM - 06/20/20
Joined up and that's a great idea. Ty for helping the community
Title: Re: *PS4 SUPPORT (t500s best Config) Overwatch Linear Config Without Micro Stutter
Post by: GoodAimButATankMain on 05:21 AM - 06/21/20
Just finnished the expo curve. Here is the link everyone!
https://community.xim.tech/index.php?topic=88215.msg815284#msg815284