XIM Community

XIM APEX => XIM APEX Discussions => Shared Configs => Topic started by: Djurik on 07:34 PM - 03/24/20

Title: Apex Legends XIM setting for PC (closest feel) (Season-12)
Post by: Djurik on 07:34 PM - 03/24/20
Season 12 Version-1 XIM Settings (Current)

(https://i.ibb.co/Zh8fK0N/Wraith-S12-v1.png)

Discord discussion here - https://discord.gg/rZAHr9BJw7
Upd: Initially there were only my settings, but community had been grown and now there is various settings by many players as well as the XIMMR files and curves collection. Lol, big friendly community now with free talks and no stress.

!! IMPORTANT !!:
For this settings to work, you need to have v4.1 ST
XIMMR File (ST) can download here - P4.1 (X1.1) (https://drive.google.com/file/d/1E7MpXw_HElGRMZfXwSJ7wS3vNfOH5xfA/view?usp=sharing)

Copy/paste codes are here
https://docs.google.com/spreadsheets/d/1iO3VlYYWcITOyQUO49dI7CjdT76hcgQA/edit?usp=sharing&ouid=118377458730062813469&rtpof=true&sd=true
you can also try other configs starting from Season 6.

(https://i.ibb.co/kGdWCSR/unknown.png)
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: jd394y on 10:47 AM - 03/25/20
The only thing on PC I haven't experimented with is Advance Settings. Went from Common to Default to OFF and last night I decided to make the change and go back to DEFAULT and def noticed movement felt waaaay smoother than OFF. I'm doing OK this season, run SOLO 95% of the time and play for a couple hours each night. 107 wins, 3.47 KD. My movement feels insanely smooth, the ONLY difference i notice compared to PC is TURN SPEED. (and i honestly can't say that, that's every cost me the game)

My settings:

DPI: 4000
Mouse and XIM: 1000 hz
ST: Titanfall 2
HIP: 11  ADS: 9.25
SAB HIP: Off
SAB ADS: 85-100
NO Smoothing, Boost, Steady AIM, Y/X ratio. want to keep it as close to 1:1 as possible.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 08:04 PM - 03/25/20
ST: Titanfall 2

Whats the noticeable difference between this and Apex ST? I see everyone now switching to TF2 ST, but that after FW and ST update, I didn't update that yet.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: sikpup on 12:36 PM - 03/26/20
Which Apex ST are you using on PC (xbox or ps4)?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 07:27 PM - 03/26/20
Which Apex ST are you using on PC (xbox or ps4)?
Xbox One

By the way, yesterday tried TF2 settings as suggested above, I can say it feels better and much more responsive, thx for suggestion. Even those you can't really see it, but you can definitely Feel the difference. I just copied my Apex settings using the code and setup is ready to go. Only ADS i reduced a bit.

Below is a better video than 1st post, so you could see how fast and responsive movements are and how the AA makes the ADS lasering.



So if you like it - use the Titanfall 2 ST, but you may copy all the settings from 1st post.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 08:05 PM - 03/29/20
So i tested playing with titanfall 2 ST these few days and adjusted my sensitivity for this and seems like this will be my perm settings for now. Here is what I achieved so far with a new settings:

(https://i.imgur.com/Vb4sylD.png)

(https://i.imgur.com/IvLv0wX.png)

This 22 bomb gameplay I accidentally deleted, so below is almost same gameplay with 19 bombs just before that, also solo, except that short of 1 more squad in the end.


So here is my final settings for this:

PC Settings:
DPI - 12000 (my mouse max)

XIM Settings (Did not upgrade to latest FW):
Titanfall 2 settings (XboxOne)

HIP:
Sens - 4.50
Synchronize - Default
Smoothing - 2
Y/X - no changes
Steady Aim - 1.0
Boost - no changes
SAB - 20

ADS:
Sens - 1.30
Synchronize - Common
Smoothing - 15
Y/X - 1.10
Steady Aim - 0
Boost - no changes
SAB - 100

* Changed Synchronize to Common as i feel it is a better AA than default, i played a few hours with this and it feels much much better this way. Not sure devs have any comments on it as HIP & ADS have 2 different synchronizations.

Apex In-Game settings:

Video:
Playing at 720p now, as my PC is old, so only like this I can get steady 100 FPS to match with a monitor refresh rate (reduced from 120Hz to 100Hz)
FOV - 84

Controller:
Menu cursor speed - center bar
rest no changes as I activate Advanced Look Controls

ALC
Deadzone - 2 click right from empty bar
Outer Treshold - 1 click right from empty bar
Responce Curve - 1 click left from default bar

Yaw Speed - 3 click left from full bar
Pitch Speed - 3 click left from full bar
Turning Extra Yaw - default line
Turning Extra PItch - 0
Turning Ramp up time - 0
Turning Ramp up delay - 0

ADS Yaw Speed - 6 click left from full bar
ADS Pitch Speed - 2 click left from full bar
ADS Turning Extra Yaw - 0
ADS Turning Extra PItch - 0
ADS Turning Ramp up time - 0
ADS Turning Ramp up delay - 0

Per Optic sensitivity (feels good with any optic attachment):
x1 - 1.0
x2 - 1.1
all others - 1.2
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 09:40 PM - 03/29/20
Sorry guyzz, just noticed that on my video my mic was all the way recording everything in the room, lol, dunno why.. I will edit the video tonight and will re upload, so same time will make it shorter a bit too
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: jd394y on 11:03 AM - 03/30/20
what are you using to get the Green cross in the center of your screen?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 06:56 PM - 03/30/20
This is Nvidia filters, Nov 2019 driver version, as after that they had removed the option to add stickers to screen overlay, so I'm still using old ones. Eventually will update it - is either there is major improvements for the games I play or someone will find a way to add back this custom stickers to Nvidia, as in system files all these files with default stickers are still there.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: hurtmep1nty on 10:51 AM - 04/01/20
I tried these settings but with the Apex ST and it felt a lot smoother than the TF one... very interested in this thread. Please update if you change or tweak anything.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 08:22 PM - 04/01/20
I tried back Apex ST also, but for me turn response feels slower, so still using TF2. The recent changes what I did:

1. HIP
SAB - changed to "OFF"

Because so many times I noticed when I want to run in 45-degree direction - the character just slows down, so I off it and I see no changes to AA strength and no more this problem.

The rest of the settings is feeling good, not touching it at the moment. Except the rotation wheel for heals and explosives need to tweak further, as it is still rotating not so smooth.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: jd394y on 10:38 AM - 04/02/20
its def weird on PC bc you can tell the the ST reacts and behaves differently than on console lol (reacts BETTER imo).All i did for the healing / shield wheel is

New Subconfig:

ACTIVATION: 3 ( 3 is normally my Healing / Shielding key bind so I used it to Activate + mouse around the wheel better)

AIM:

15 Sensitivity
Sync: Default
Boost: 200

and that's it. Super smooth, zero issues with choosing between all heals and shields.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 06:51 PM - 04/02/20
its def weird on PC bc you can tell the the ST reacts and behaves differently than on console lol (reacts BETTER imo).All i did for the healing / shield wheel is

New Subconfig:

ACTIVATION: 3 ( 3 is normally my Healing / Shielding key bind so I used it to Activate + mouse around the wheel better)

AIM:

15 Sensitivity
Sync: Default
Boost: 200

and that's it. Super smooth, zero issues with choosing between all heals and shields.

Thx, will try tonight. But whats your DPI, Mouse refresh rate for PC/XIM and in Game FOV (just in case its affects also). Apex ST or TF2?
I think the last time I have smooth healing wheel is when I had 1000hz on mouse and XIM, I changed to 500hz, maybe this one also affect. Will try to play with 1000hz tonight
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Maria on 04:04 AM - 04/03/20
I just got my PC and Xim Apex is imo a bigger advantage than on console. Aim assist even when hip firing/strafing, 110 fov with no issues and I once I turned that hz to 144hz it was game over. Sexy squad wipes.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: hexa on 08:14 AM - 04/03/20
So is this for people who plays with controller on PC?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Maria on 02:08 PM - 04/03/20
So is this for people who plays with controller on PC?

Mouse through Xim Apex
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: jd394y on 11:11 AM - 04/04/20
its def weird on PC bc you can tell the the ST reacts and behaves differently than on console lol (reacts BETTER imo).All i did for the healing / shield wheel is

New Subconfig:

ACTIVATION: 3 ( 3 is normally my Healing / Shielding key bind so I used it to Activate + mouse around the wheel better)

AIM:

15 Sensitivity
Sync: Default
Boost: 200

and that's it. Super smooth, zero issues with choosing between all heals and shields.

Thx, will try tonight. But whats your DPI, Mouse refresh rate for PC/XIM and in Game FOV (just in case its affects also). Apex ST or TF2?
I think the last time I have smooth healing wheel is when I had 1000hz on mouse and XIM, I changed to 500hz, maybe this one also affect. Will try to play with 1000hz tonight

all my settings are ABOVE (2nd comment in this thread) . default + DPI = 4k, 1000hz on BOTH..... still messing around with 3200 (default) + 12k DPI (Common) Tried 12k w/ Common and  they felt really good, was an absolute magnet for aim assist but then there's times when it feels like @#$%. it's so inconsistent it sucks... dont know if it's the game / servers etc. I always go back to 4k on Default.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 08:55 PM - 04/05/20
I just got my PC and Xim Apex is imo a bigger advantage than on console. Aim assist even when hip firing/strafing, 110 fov with no issues and I once I turned that hz to 144hz it was game over. Sexy squad wipes.
Nice, i wish i could upgrade mine soon. i have 100hz only now (downscale my 120Hz monitor) and even with FOV 84 it is still drop sometimes lower than 100 FPS. 144hz is @#$% smooth. Hip fire aim assist not always works, coz for me i totally off SAB. The only thing that i like is that even with the high senses for good movement - it is still slows mouse down on enemy, so can hip more precise and accurate. Without it on high sense i was going all around the place without hitting the dudes ))


all my settings are ABOVE (2nd comment in this thread) . default + DPI = 4k, 1000hz on BOTH..... still messing around with 3200 (default) + 12k DPI (Common) Tried 12k w/ Common and  they felt really good, was an absolute magnet for aim assist but then there's times when it feels like @#$%. it's so inconsistent it sucks... dont know if it's the game / servers etc. I always go back to 4k on Default.
Yeah, 12k DPI AA is much stronger than 4k and below, i like it alot. After i set mouse on high senses - it easily breaks the AA bubble if move mouse faster, but if move slow - it stays within it. The game itself i think ok now, but those suffering is with old PC parts (my case), which i think they don't really bother to optimize as it already obsolete + connection issues (also my case) - i got to buy private VPN for a more/less good hirtreg and connection, without it a lot of times i got hit behind the corner and also most of the time can't see enemy shoot yet, but can see suddenly my armor totally gone. Gonna change my ISP soon anyways.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: jd394y on 10:42 AM - 04/06/20

[/quote]
Yeah, 12k DPI AA is much stronger than 4k and below, i like it alot. After i set mouse on high senses - it easily breaks the AA bubble if move mouse faster, but if move slow - it stays within it. The game itself i think ok now, but those suffering is with old PC parts (my case), which i think they don't really bother to optimize as it already obsolete + connection issues (also my case) - i got to buy private VPN for a more/less good hirtreg and connection, without it a lot of times i got hit behind the corner and also most of the time can't see enemy shoot yet, but can see suddenly my armor totally gone. Gonna change my ISP soon anyways.
[/quote]

you sure? normally HIGHER DPI (12k) = less AA, yes, easier to cut through AA, but should provide LESS overall AA in gun fights.

From what i've seen multiple times on these forums:

LESS AA = High DPI, Sync off, Boost, Steady AIM
MORE AA = Low DPI, SAB
1000hz Polling = Lowers AA, More responsive and breaks out of AA Bubble, less accurate overall as mouse can drop Hz which leads to inconsistency. (depends on how well your current mouse Holds the 1000hz polling rate)
500Hz Polling = More accurate, more reliable. Increase of AA and better target tracking.

Now use all this with a grain of salt, it was stuff that ive seen on the forums and saved into my notes on my iphone for later use. i thought 12k DPI had WAY LESS AA than 3200 or 4k DPI personally. Hope some of this helps, i might try and go back to 500hz today and see how it handles.

Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: jd394y on 12:52 PM - 04/06/20
Soooooo after running some tests on the HZ of my mouse, i decided to check out 500hz on Mouse AND XIM and let me just say.... i will NEVER go back to 1000hz lol. The AA is sooooooooo clean and feels absolutely AMAZING! BY far the best settings i've come across.

Quick Recap of current settings

Titanfall 2 ST
HIP: 12.50 / SAB OFF
ADS: 11.50 / SAB 85 / XY Ratio: 1.25 (trying this out, so far so good)
SYNC: Default
Mouse: 3200 DPI / 500 hz
Xim Apex: 500 Hz
ALS = OFF
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 06:25 AM - 04/07/20
I feel better AA with higher DPI, and yeah, i used 1000hz before, after swapping to 500Hz it feels better for me too, so all my settings is also with 500Hz
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: n40line on 10:39 PM - 04/07/20
Soooooo after running some tests on the HZ of my mouse, i decided to check out 500hz on Mouse AND XIM and let me just say.... i will NEVER go back to 1000hz lol. The AA is sooooooooo clean and feels absolutely AMAZING! BY far the best settings i've come across.

Quick Recap of current settings

Titanfall 2 ST
HIP: 12.50 / SAB OFF
ADS: 11.50 / SAB 85 / XY Ratio: 1.25 (trying this out, so far so good)
SYNC: Default
Mouse: 3200 DPI / 500 hz
Xim Apex: 500 Hz
ALS = OFF


Which is the dead zone?
None, small, medium, large
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: jd394y on 12:16 AM - 04/08/20
Soooooo after running some tests on the HZ of my mouse, i decided to check out 500hz on Mouse AND XIM and let me just say.... i will NEVER go back to 1000hz lol. The AA is sooooooooo clean and feels absolutely AMAZING! BY far the best settings i've come across.

Quick Recap of current settings

Titanfall 2 ST
HIP: 12.50 / SAB OFF
ADS: 11.50 / SAB 85 / XY Ratio: 1.25 (trying this out, so far so good)
SYNC: Default
Mouse: 3200 DPI / 500 hz
Xim Apex: 500 Hz
ALS = OFF


Which is the dead zone?
None, small, medium, large

Everything else other than listed is default settings. (Settings when you start the game for the first time)
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Maria on 02:10 PM - 04/10/20
What controller you guys use to authenticate?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: jd394y on 08:12 PM - 04/10/20
What controller you guys use to authenticate?

XBox controller.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Maria on 12:27 PM - 04/11/20
Are you using default or common? Because at that DPI my default ads would be 16 (90 fov) or 20 (110 fov) and that's already fairly slow...
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: jd394y on 07:39 PM - 04/11/20
Are you using default or common? Because at that DPI my default ads would be 16 (90 fov) or 20 (110 fov) and that's already fairly slow...

I use default. Every time i try Common i come right back to default. Default = better movement, easier transition in and out of the aim assist bubble (in my opinion.) Just use w/e sensitivity feels right to YOU.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: savimaster on 03:53 AM - 04/13/20
My mouse movement is so slow on pc Even With 4K dpi and 30 sens on default. Am i missing something?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: jd394y on 10:29 AM - 04/13/20
My mouse movement is so slow on pc Even With 4K dpi and 30 sens on default. Am i missing something?


same rules apply as console... so did you go into settings under controller and change Both sensitivities to 7?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Maria on 02:00 PM - 04/13/20
My mouse movement is so slow on pc Even With 4K dpi and 30 sens on default. Am i missing something?

Fps too high?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: n40line on 10:49 PM - 04/14/20
Soooooo after running some tests on the HZ of my mouse, i decided to check out 500hz on Mouse AND XIM and let me just say.... i will NEVER go back to 1000hz lol. The AA is sooooooooo clean and feels absolutely AMAZING! BY far the best settings i've come across.

Quick Recap of current settings

Titanfall 2 ST
HIP: 12.50 / SAB OFF
ADS: 11.50 / SAB 85 / XY Ratio: 1.25 (trying this out, so far so good)
SYNC: Default
Mouse: 3200 DPI / 500 hz
Xim Apex: 500 Hz
ALS = OFF


fov?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: nakedmoose on 02:44 AM - 04/15/20
I've been struggling to get the Xim Apex set up on the PC. Even after just moving the setup to plugging in the Apex in the PC, Apex Legends does not detect any controller movement.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: GSA_Kronos_GR on 05:07 AM - 04/15/20
I've been struggling to get the Xim Apex set up on the PC. Even after just moving the setup to plugging in the Apex in the PC, Apex Legends does not detect any controller movement.
Have you check your connection on xim usb hub?
1 port mouse second port keyboard or sony nav or any controller you like third port controller for mapping (ps controller or xbox controller)
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: jd394y on 09:56 AM - 04/15/20
Soooooo after running some tests on the HZ of my mouse, i decided to check out 500hz on Mouse AND XIM and let me just say.... i will NEVER go back to 1000hz lol. The AA is sooooooooo clean and feels absolutely AMAZING! BY far the best settings i've come across.

Quick Recap of current settings

Titanfall 2 ST
HIP: 12.50 / SAB OFF
ADS: 11.50 / SAB 85 / XY Ratio: 1.25 (trying this out, so far so good)
SYNC: Default
Mouse: 3200 DPI / 500 hz
Xim Apex: 500 Hz
ALS = OFF


fov?


110
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: RiskyShot on 04:31 AM - 04/16/20
So i tested playing with titanfall 2 ST these few days and adjusted my sensitivity for this and seems like this will be my perm settings for now. Here is what I achieved so far with a new settings:

(https://i.imgur.com/Vb4sylD.png)

(https://i.imgur.com/IvLv0wX.png)

This 22 bomb gameplay I accidentally deleted, so below is almost same gameplay with 19 bombs just before that, also solo, except that short of 1 more squad in the end.


So here is my final settings for this:

PC Settings:
DPI - 12000 (my mouse max)

XIM Settings (Did not upgrade to latest FW):
Titanfall 2 settings (XboxOne)

HIP:
Sens - 4.50
Synchronize - Default
Smoothing - 2
Y/X - no changes
Steady Aim - 1.0
Boost - no changes
SAB - 20

ADS:
Sens - 1.30
Synchronize - Common
Smoothing - 15
Y/X - 1.10
Steady Aim - 0
Boost - no changes
SAB - 100

* Changed Synchronize to Common as i feel it is a better AA than default, i played a few hours with this and it feels much much better this way. Not sure devs have any comments on it as HIP & ADS have 2 different synchronizations.

Apex In-Game settings:

Video:
Playing at 720p now, as my PC is old, so only like this I can get steady 100 FPS to match with a monitor refresh rate (reduced from 120Hz to 100Hz)
FOV - 84

Controller:
Menu cursor speed - center bar
rest no changes as I activate Advanced Look Controls

ALC
Deadzone - 2 click right from empty bar
Outer Treshold - 1 click right from empty bar
Responce Curve - 1 click left from default bar

Yaw Speed - 3 click left from full bar
Pitch Speed - 3 click left from full bar
Turning Extra Yaw - default line
Turning Extra PItch - 0
Turning Ramp up time - 0
Turning Ramp up delay - 0

ADS Yaw Speed - 6 click left from full bar
ADS Pitch Speed - 2 click left from full bar
ADS Turning Extra Yaw - 0
ADS Turning Extra PItch - 0
ADS Turning Ramp up time - 0
ADS Turning Ramp up delay - 0

Per Optic sensitivity (feels good with any optic attachment):
x1 - 1.0
x2 - 1.1
all others - 1.2

What does titanfall settings mean? Also, what is ST?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: jd394y on 10:30 AM - 04/16/20
So i tested playing with titanfall 2 ST these few days and adjusted my sensitivity for this and seems like this will be my perm settings for now. Here is what I achieved so far with a new settings:

(https://i.imgur.com/Vb4sylD.png)

(https://i.imgur.com/IvLv0wX.png)

This 22 bomb gameplay I accidentally deleted, so below is almost same gameplay with 19 bombs just before that, also solo, except that short of 1 more squad in the end.


So here is my final settings for this:

PC Settings:
DPI - 12000 (my mouse max)

XIM Settings (Did not upgrade to latest FW):
Titanfall 2 settings (XboxOne)

HIP:
Sens - 4.50
Synchronize - Default
Smoothing - 2
Y/X - no changes
Steady Aim - 1.0
Boost - no changes
SAB - 20

ADS:
Sens - 1.30
Synchronize - Common
Smoothing - 15
Y/X - 1.10
Steady Aim - 0
Boost - no changes
SAB - 100

* Changed Synchronize to Common as i feel it is a better AA than default, i played a few hours with this and it feels much much better this way. Not sure devs have any comments on it as HIP & ADS have 2 different synchronizations.

Apex In-Game settings:

Video:
Playing at 720p now, as my PC is old, so only like this I can get steady 100 FPS to match with a monitor refresh rate (reduced from 120Hz to 100Hz)
FOV - 84

Controller:
Menu cursor speed - center bar
rest no changes as I activate Advanced Look Controls

ALC
Deadzone - 2 click right from empty bar
Outer Treshold - 1 click right from empty bar
Responce Curve - 1 click left from default bar

Yaw Speed - 3 click left from full bar
Pitch Speed - 3 click left from full bar
Turning Extra Yaw - default line
Turning Extra PItch - 0
Turning Ramp up time - 0
Turning Ramp up delay - 0

ADS Yaw Speed - 6 click left from full bar
ADS Pitch Speed - 2 click left from full bar
ADS Turning Extra Yaw - 0
ADS Turning Extra PItch - 0
ADS Turning Ramp up time - 0
ADS Turning Ramp up delay - 0

Per Optic sensitivity (feels good with any optic attachment):
x1 - 1.0
x2 - 1.1
all others - 1.2

What does titanfall settings mean? Also, what is ST?
He's talking about the profile he uses. When you first set it up, you punch in what GAME you using, go down the the list, find Titanfall 2 ST (profile)
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: LJEND on 02:59 AM - 04/17/20
yo all. im preda on controler PC, today i bought xim apex, blekin transafer cable for ximlink, and xbox controler.


I see a lot settings here i will test all today, and if i find smth bettter i post it.

tell me only i need to cap my frames to my monitor hz yes? ANd when i change fov for other than in the settings i need to change all rest of settings too? or fov not change anything? If i need,eyou  guys have some calculator or can tell my how to change sensivity when i change fov? sorry for my bad english -_-; have a nice day all
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 08:05 PM - 04/17/20
Are you using default or common? Because at that DPI my default ads would be 16 (90 fov) or 20 (110 fov) and that's already fairly slow...
Im using Default for HIP and Common for ADS and it also works well this way. And i noticed 1 more thing, here is maybe the difference for you - my mouse windows settings is +1 to default sensitivity settings.
When i play normal with M+KB - it doesn't matter what windows mouse settings are, in Apex it just take RAW input, but when i accidentally changed my Windows mouse settings lower and later play through XIM - it affects the sensitivity. So XIM maybe taking Windows mouse inputs?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: KO Poopstain on 08:18 PM - 04/20/20
Hey i have a couple questions.

First one is how do i go about getting the frimware and ST your currently using? do i need to reset my xim to factory and will i lose all my current configs if i do that. How do i get the old TF2 ST? do i need to delete the manager app and redownload it and not update the game files? just a little confused on that stuff. Im using very simialr settings as JD as i feel like the the non ALC feel better for me. Ive tried your settings and they are good for close range but when im aim far the reticle is very floaty and i cant lad consistant shots.

Second has to do with my setup and getting advice on how to make the changes i need to inorder to cap fps for HZ. Ive seen people talking about how importants that is and im not sure why and or how to do it. my mouse is set to 500hz along with xim and my monitor is is 1440 144hz. I currenty have all settings on low and usualy get around 70fps while fighting. If im just looting its anywhere from 90-144. Im not the most PC savey so just looking for tips and how to get the correct setup. thanks for any help.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 09:21 PM - 04/22/20
1. I had updated to the latest firmware few days ago and didn't noticed any impact on the controls. But what i missed is i think I'm still using old ST. I already downloaded latest games config, but need to delete existing and add new ST. This part i will test these few days. For firmware you can follow the steps here - https://community.xim.tech/index.php?topic=85503.0 (https://community.xim.tech/index.php?topic=85503.0)
I also have this issue with floating crosshair, but you notice that is only happening when you aiming somewhere not enemy. When you aim at enemy AA slows it down, so is no more float. So i guess it should be ok, get used to it. Now with these settings i start like back R301 and especially Havoc, i can drop most of the enemy from mid to long range with Havoc before they even reached to me, as this sensitivity let me lasering the dudes, no chance to escape from 1 mag 95% of the time  ;D
Alternatively if it happened on x1 scopes - try to reduce Response Curve in ALC a bit, this settings makes the crosshair very responsive, so it might float a bit. If this is only happens at x2 scope and above - try set Per Optic sensitivity back to default.

2. 70 is too low for apex, i mean is still ok, but not enough for competitive gameplay. You will need to search for Apex Legends optimization videos, or forums threads to find what best works for you.
I have a 120Hz monitor and my FPS on all low is also cant achieve constant 120FPS (it needs to be constant for smooth gameplay). What i did is:
1. Locked my monitor to 100Hz in properties
2. Locked Apex Legends to 100FPS and 100Hz refresh rate
(Origin - Apex - Game properties - Advanced Launch Options - key inside this: -novid +fps_max 100 -refresh 100)
3. Removed Origin In-Game
4. Set FOV in Apex to 84 (like to play at 104 FOV, but hardware cannot cope, haha)
5. Set Apex Resolution to 1360x720, the figures might be slight different, i cant remember exact values for resolution, but is 720p.
So with the settings above i get constant 100FPS in game and smooth gameplay.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 03:57 AM - 04/23/20
By the way, currently i playing with 3200 DPI, found this somehow better when tracking enemies, the AA more often had turned my character almost like 90 degree in close 1 on 1 fight. Lol, that was something spectacular when i could laser the guy run in front of me from one side to the other side, so there were like 120 degree turn with very precise tracking. If someone need, below is the TF2 ST settings for 3200 and 12k DPI.

3200 DPI
Code: [Select]
>>> XIM APEX [Apex TF2 3200 DPI] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

12k DPI
Code: [Select]
>>> XIM APEX [Apex TF2 12k DPI] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

I had also added Ballistic curve to HIP fire, as per latest XIMGameplay config update, as this doesnt impact movement and helps during hipfire fight
Code: [Select]
>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:AAAApwFPAfYCngNFA+0ElAU8BeMGiwcyB9oIgQkpCdAKeIsfC/gM0Q2pDoIPWxA0EQwR5RK+E5cUbxVIFiEW+hfSGKsZhBpdGzUcDhznHcAemB9xIEohIyH7ItQjrSSGJV4mNycQ:X5BC
<<< XIM APEX END COPY <<<

Credits to XIMGameplay video - https://www.youtube.com/watch?v=UsKekwKEock
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: dautruongybb on 07:57 PM - 05/26/20
By the way, currently i playing with 3200 DPI, found this somehow better when tracking enemies, the AA more often had turned my character almost like 90 degree in close 1 on 1 fight. Lol, that was something spectacular when i could laser the guy run in front of me from one side to the other side, so there were like 120 degree turn with very precise tracking. If someone need, below is the TF2 ST settings for 3200 and 12k DPI.

3200 DPI
Code: [Select]
>>> XIM APEX [Apex TF2 3200 DPI] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

12k DPI
Code: [Select]
>>> XIM APEX [Apex TF2 12k DPI] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

I had also added Ballistic curve to HIP fire, as per latest XIMGameplay config update, as this doesnt impact movement and helps during hipfire fight
Code: [Select]
>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:AAAApwFPAfYCngNFA+0ElAU8BeMGiwcyB9oIgQkpCdAKeIsfC/gM0Q2pDoIPWxA0EQwR5RK+E5cUbxVIFiEW+hfSGKsZhBpdGzUcDhznHcAemB9xIEohIyH7ItQjrSSGJV4mNycQ:X5BC
<<< XIM APEX END COPY <<<

Credits to XIMGameplay video - https://www.youtube.com/watch?v=UsKekwKEock

Do you have the latest updates on your PC?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: GSA_Kronos_GR on 01:40 AM - 05/28/20
Very good profile.
Only problem is that when i press button to "ping" it also fires the weapon. I double checked everything but i set the keybindings correctly. I use xbox ST. Any ideas?

Any updates for the new season?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Giantman12345 on 05:28 AM - 05/28/20
Very good profile.
Only problem is that when i press button to "ping" it also fires the weapon. I double checked everything but i set the keybindings correctly. I use xbox ST. Any ideas?

Any updates for the new season?

It means it's binded to something else, double check auxiliary's and bindings for hip and ads
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: GSA_Kronos_GR on 09:29 AM - 05/28/20
Very good profile.
Only problem is that when i press button to "ping" it also fires the weapon. I double checked everything but i set the keybindings correctly. I use xbox ST. Any ideas?

Any updates for the new season?

It means it's binded to something else, double check auxiliary's and bindings for hip and ads

I did many times.
I created a new profile and transfer the values manually. Now works fine.  ;D
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: IM-Nikon on 09:33 AM - 05/28/20
Sorry! I want to ask
According to your settings
When I press the mouse (right button) (aiming)
very slow
⬇️
https://www.youtube.com/watch?v=cWdrvGAep-0 (https://www.youtube.com/watch?v=cWdrvGAep-0)
(0:27)

I checked the same settings as you
⬇️
https://www.flickr.com/photos/bossusa732/49945717242/in/dateposted-public/ (https://www.flickr.com/photos/bossusa732/49945717242/in/dateposted-public/)
⬇️
https://www.flickr.com/photos/bossusa732/49944926753/in/dateposted-public/ (https://www.flickr.com/photos/bossusa732/49944926753/in/dateposted-public/)

Is this problem caused by the new version of the Xim Apex app?


thank you very much

『 Mouse setting = 500Hz
     XimApex = 500Hz 』
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: GSA_Kronos_GR on 11:18 AM - 05/28/20
Polling rate is 1000 mouse 500 app or 500 mouse 500 app?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: PampuGomez on 05:55 AM - 05/29/20
By the way, currently i playing with 3200 DPI, found this somehow better when tracking enemies, the AA more often had turned my character almost like 90 degree in close 1 on 1 fight. Lol, that was something spectacular when i could laser the guy run in front of me from one side to the other side, so there were like 120 degree turn with very precise tracking. If someone need, below is the TF2 ST settings for 3200 and 12k DPI.

3200 DPI
Code: [Select]
>>> XIM APEX [Apex TF2 3200 DPI] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

12k DPI
Code: [Select]
>>> XIM APEX [Apex TF2 12k DPI] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

I had also added Ballistic curve to HIP fire, as per latest XIMGameplay config update, as this doesnt impact movement and helps during hipfire fight
Code: [Select]
>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:AAAApwFPAfYCngNFA+0ElAU8BeMGiwcyB9oIgQkpCdAKeIsfC/gM0Q2pDoIPWxA0EQwR5RK+E5cUbxVIFiEW+hfSGKsZhBpdGzUcDhznHcAemB9xIEohIyH7ItQjrSSGJV4mNycQ:X5BC
<<< XIM APEX END COPY <<<

Credits to XIMGameplay video - https://www.youtube.com/watch?v=UsKekwKEock

I can't copy your setting bro, can you post here your sens hip ecc ecc? thanks
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 10:56 PM - 06/04/20
Hiii.. Wah, so many posts, lol.. sorry was busy lately and also messing around with settings.. For me S5 messed my AA, so it become much much less. So what i tried to do is changed to 400 DPI, as recommended by teammate. My main target was to make character turn faster. And yes, it is faster now, AA also better (i changed synchronization for ADS to default and move response curve slider 4click to the left from default) but the problem is - there is heavy stutters when doing macro movements, unplayable.
Tonight i will be changing back to 3200, will do adjustments from there, will test sometime and will update here.

Was also testing a XIM link. Everything connected and work, but it seems stuck buttons when you switch to xim, or crosshair move infinitely, etc. Will be testing also with Windows 1607 Anniversary once have time to install it.

Recently also added a Ballistic curve to ADS, it helps me slow down crosshair more on enemy. Here it is, you may try it.
Code: [Select]
>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:gACAPYDAgWqCJYL9g+CE44WmhmeHMAf8CMgJlApgCywL+AzEDZAOXA8oD/QQwBGMElgTJBPwFLwViBZUFyAX7Bi4GYQaUBscG+gctB2AHkwfGB/kILAhfCJIIxQj4CSsJXgmRCcQ:X5BC
<<< XIM APEX END COPY <<<


Very good profile.
Only problem is that when i press button to "ping" it also fires the weapon. I double checked everything but i set the keybindings correctly. I use xbox ST. Any ideas?

Any updates for the new season?

All the bindings need to check and set for your own liking. This is happened coz my ping button is set to ALT, original ping button is melee.

Sorry! I want to ask
According to your settings
When I press the mouse (right button) (aiming)
very slow
⬇️
https://www.youtube.com/watch?v=cWdrvGAep-0 (https://www.youtube.com/watch?v=cWdrvGAep-0)
(0:27)

My settings uses ADS translator (if you copied my code), so just check the in game ADS sensitivity are maxed out (at mouse and keyboard settings there).
If you manually did the settings in XIM - the ADS Aim settings using Common synchronization, not default and translator is ADS. Try.

I can't copy your setting bro, can you post here your sens hip ecc ecc? thanks
Currently don't have access to my XIM. You just put it to your liking for now.. After i finish testing for season 5 i will update settings here. Coz now it really messed up my AA.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 08:53 PM - 06/05/20
Hi All, yesterday messed with settings and made it to turn character more faster and also was literally lasering people again min 10-15 kills per game, AA seems back to normal, but feels a bit less. Guess I'm sticking with this settings for season 5. Here is the updates:

Apex in game changes are all same except the below changes:
FOV - i changed to 86
Responce Curve - 4 click left from default bar


XIM settings:
I find that when you increase the response curve in-game - this setting behave weird, so i tried Latest Apex Legends ST (DPI still 3200)

Settings in XIM:

HIP:
Sens - 18
Synchronize - Default
Smoothing - 0
Y/X - 1.10
Steady Aim - 15.0
Boost - no changes
SAB - OFF

ADS:
Sens - 10
Synchronize - Default
Smoothing - 15
Y/X - 1.10
Steady Aim - 0
Boost - no changes
SAB - 100

ADS Ballistic curve:
Code: [Select]
>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:gACAPYDAgWqCJYL9g+CE44WmhmeHMAf8CMgJlApgCywL+AzEDZAOXA8oD/QQwBGMElgTJBPwFLwViBZUFyAX7Bi4GYQaUBscG+gctB2AHkwfGB/kILAhfCJIIxQj4CSsJXgmRCcQ:X5BC
<<< XIM APEX END COPY <<<

The code is for the above settings (including ballistic curve):
Code: [Select]
>>> XIM APEX [Apex 3200 DPI] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 08:56 PM - 06/05/20
Ouh, nice, can edit 1st post now.. Thx guys!!.. Will tidy up 1st page
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: dautruongybb on 11:02 PM - 06/05/20
Thanks with update. I try it. You play apex legend in pc?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 04:08 AM - 06/06/20
Yes, this is exclusively setup for PC. May not work good for console. Here on forum almost all other settings are for consoles, so im not adding anything for it.

PS: By the way, all settings from this thread i had tidy up on the 1st page. So if you want to see a complete settings list (even previous settings) - refer to 1st post.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: PampuGomez on 08:02 AM - 06/06/20
Yes, this is exclusively setup for PC. May not work good for console. Here on forum almost all other settings are for consoles, so im not adding anything for it.

PS: By the way, all settings from this thread i had tidy up on the 1st page. So if you want to see a complete settings list (even previous settings) - refer to 1st post.

I play on 100 fov and is too slow so i have to increase the hip and ads sens?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: jd394y on 05:23 PM - 06/06/20
Hi All, yesterday messed with settings and made it to turn character more faster and also was literally lasering people again min 10-15 kills per game, AA seems back to normal, but feels a bit less. Guess I'm sticking with this settings for season 5. Here is the updates:

Apex in game changes are all same except the below changes:
FOV - i changed to 86
Responce Curve - 4 click left from default bar


XIM settings:
I find that when you increase the response curve in-game - this setting behave weird, so i tried Latest Apex Legends ST (DPI still 3200)

Settings in XIM:

HIP:
Sens - 18
Synchronize - Default
Smoothing - 0
Y/X - 1.10
Steady Aim - 15.0
Boost - no changes
SAB - OFF

ADS:
Sens - 10
Synchronize - Default
Smoothing - 15
Y/X - 1.10
Steady Aim - 0
Boost - no changes
SAB - 100

ADS Ballistic curve:
Code: [Select]
>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:gACAPYDAgWqCJYL9g+CE44WmhmeHMAf8CMgJlApgCywL+AzEDZAOXA8oD/QQwBGMElgTJBPwFLwViBZUFyAX7Bi4GYQaUBscG+gctB2AHkwfGB/kILAhfCJIIxQj4CSsJXgmRCcQ:X5BC
<<< XIM APEX END COPY <<<

The code is for the above settings (including ballistic curve):
Code: [Select]
>>> XIM APEX [Apex 3200 DPI] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

have you just tried shutting off advance look settings? I dont use ALS at all on pc. APEX ST, 4k DPI, Default @ 500hz on both mouse and xim and AA is amazing + i dont have turn issues at all.Feels smooth as butter. I tried using ALS and I didnt like it at all. AA felt off and movement did too. I can def see ALS being very good for console since it feels like your moving through mudd lol.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: dautruongybb on 05:01 AM - 06/07/20
Hi All, yesterday messed with settings and made it to turn character more faster and also was literally lasering people again min 10-15 kills per game, AA seems back to normal, but feels a bit less. Guess I'm sticking with this settings for season 5. Here is the updates:

Apex in game changes are all same except the below changes:
FOV - i changed to 86
Responce Curve - 4 click left from default bar


XIM settings:
I find that when you increase the response curve in-game - this setting behave weird, so i tried Latest Apex Legends ST (DPI still 3200)

Settings in XIM:

HIP:
Sens - 18
Synchronize - Default
Smoothing - 0
Y/X - 1.10
Steady Aim - 15.0
Boost - no changes
SAB - OFF

ADS:
Sens - 10
Synchronize - Default
Smoothing - 15
Y/X - 1.10
Steady Aim - 0
Boost - no changes
SAB - 100

ADS Ballistic curve:
Code: [Select]
>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:gACAPYDAgWqCJYL9g+CE44WmhmeHMAf8CMgJlApgCywL+AzEDZAOXA8oD/QQwBGMElgTJBPwFLwViBZUFyAX7Bi4GYQaUBscG+gctB2AHkwfGB/kILAhfCJIIxQj4CSsJXgmRCcQ:X5BC
<<< XIM APEX END COPY <<<

The code is for the above settings (including ballistic curve):
Code: [Select]
>>> XIM APEX [Apex 3200 DPI] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

have you just tried shutting off advance look settings? I dont use ALS at all on pc. APEX ST, 4k DPI, Default @ 500hz on both mouse and xim and AA is amazing + i dont have turn issues at all.Feels smooth as butter. I tried using ALS and I didnt like it at all. AA felt off and movement did too. I can def see ALS being very good for console since it feels like your moving through mudd lol.
You use alc? I dont use it. Setting alc and xim apex of you?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 08:55 PM - 06/07/20
I play on 100 fov and is too slow so i have to increase the hip and ads sens?

Ya, try this. But could be many reasons why this happened. DPI same? In game mouse sensitivity (hip & ads) set to 20? In XIM synchronization same?

have you just tried shutting off advance look settings? I dont use ALS at all on pc. APEX ST, 4k DPI, Default @ 500hz on both mouse and xim and AA is amazing + i dont have turn issues at all.Feels smooth as butter. I tried using ALS and I didnt like it at all. AA felt off and movement did too. I can def see ALS being very good for console since it feels like your moving through Mudd lol.

Hi, ya, i had tried to off it, it is also ok, the main reason i don't use default is because it add acceleration to the mouse, which is no good for muscle memory. I use ALC because there can off acceleration, so is like raw mouse input.

You use alc? I dont use it. Setting alc and xim apex of you?

On the 1st post of this thread
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: dautruongybb on 09:32 PM - 06/07/20
I do not understand why my AA is not working 2 today. Do you have any workarounds? How do i know if AA works?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 01:07 AM - 06/08/20
Hi. The only way i check it quick is in firing range. ADS to dummy with R99 or Wingman and move left and right (do not adjust mouse) - then the crosshair will adjust by itself to dummy. Not much, but you can notice it.

PS: i recalling in season 4, with the same settings, when i activate dummies - AA was adjusting crosshair quite alot on them, now it does not happening. Not sure where to adjust for it, or maybe respawn had adjusted something. If anyone have any suggestion - pls post, would like to have stronger AA as before also. I could only think is because i OFF SAB on hip, maybe it takes time for AA to activate when i switching from HIP to ADS. the rest of the settings are same.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: dautruongybb on 01:50 AM - 06/08/20
thank's  . i try it.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 09:24 PM - 06/08/20
Ok, yesterday did test a several settings and found a few interesting things  :D.

XIM Settings:
1. Transferred my 400 DPI settings from TF2 ST to Apex Legends ST. It seems better for season 5, Responce curve can be reduced by 4-5 clicks from the default.
2. Changed HIP SAB to 10 - and AA surprisingly stronger. I leave it there for now for further tests, but for me movement a bit affected, doesn't feel comfortable.

Finding-1 (this one interesting)
When i switched to this Apex ST with 400 DPI and go to firing range - my weapons had 0 spread!! Not sure why like this. I had switched to Apex ST with 3200 DPI and the spread is big. Switched back - 0 spread. (R99 still have a bit).


Finding-2
It seems Apex somehow initialize controlling devices during loading of match (my guess only, this could be other explanation) and based on it adjust AA:
1. I had entered firing range with activated dummies with my ADS synchronization DEFAULT - and AA was strong, i had switched it to Common - still same.
2. Entered firing range with activated dummies with my ADS synchronization COMMON - and AA was weak, i had switched it to back to Common still weak. After i restarted firing range with ADS synchronization DEFAULT - AA back to normal.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: dautruongybb on 04:05 AM - 06/09/20
You can update config new with version xim apex fw new?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Giantman12345 on 04:11 AM - 06/09/20
Ok, yesterday did test a several settings and found a few interesting things  :D.

XIM Settings:
1. Transferred my 400 DPI settings from TF2 ST to Apex Legends ST. It seems better for season 5, Responce curve can be reduced by 4-5 clicks from the default.
2. Changed HIP SAB to 10 - and AA surprisingly stronger. I leave it there for now for further tests, but for me movement a bit affected, doesn't feel comfortable.

Finding-1 (this one interesting)
When i switched to this Apex ST with 400 DPI and go to firing range - my weapons had 0 spread!! Not sure why like this. I had switched to Apex ST with 3200 DPI and the spread is big. Switched back - 0 spread. (R99 still have a bit).


Finding-2
It seems Apex somehow initialize controlling devices during loading of match (my guess only, this could be other explanation) and based on it adjust AA:
1. I had entered firing range with activated dummies with my ADS synchronization DEFAULT - and AA was strong, i had switched it to Common - still same.
2. Entered firing range with activated dummies with my ADS synchronization COMMON - and AA was weak, i had switched it to back to Common still weak. After i restarted firing range with ADS synchronization DEFAULT - AA back to normal.
That's Intresting because it wouldn't make sense for that to work like that. All the PS4 or the game can recognise is that a DS4 is connected wired to the PS4, because the xim allows the DS4 inputs to be passed through but edited by the apex from what I believe so curious to how this is possible, I'd have to test it though
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: PampuGomez on 04:47 AM - 06/09/20
Hi All, yesterday messed with settings and made it to turn character more faster and also was literally lasering people again min 10-15 kills per game, AA seems back to normal, but feels a bit less. Guess I'm sticking with this settings for season 5. Here is the updates:

Apex in game changes are all same except the below changes:
FOV - i changed to 86
Responce Curve - 4 click left from default bar


XIM settings:
I find that when you increase the response curve in-game - this setting behave weird, so i tried Latest Apex Legends ST (DPI still 3200)

Settings in XIM:

HIP:
Sens - 18
Synchronize - Default
Smoothing - 0
Y/X - 1.10
Steady Aim - 15.0
Boost - no changes
SAB - OFF

ADS:
Sens - 10
Synchronize - Default
Smoothing - 15
Y/X - 1.10
Steady Aim - 0
Boost - no changes
SAB - 100

ADS Ballistic curve:
Code: [Select]
>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:gACAPYDAgWqCJYL9g+CE44WmhmeHMAf8CMgJlApgCywL+AzEDZAOXA8oD/QQwBGMElgTJBPwFLwViBZUFyAX7Bi4GYQaUBscG+gctB2AHkwfGB/kILAhfCJIIxQj4CSsJXgmRCcQ:X5BC
<<< XIM APEX END COPY <<<

The code is for the above settings (including ballistic curve):
Code: [Select]
>>> XIM APEX [Apex 3200 DPI] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

Only change DPI 12000 and easy win in solo on the first match of the day
FOV 100
I think my problem is muscles memory with 3200 DPI
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 09:19 PM - 06/09/20
You can update config new with version xim apex fw new?
Currently using latest FW and Games configs also latest as of today

That's Intresting because it wouldn't make sense for that to work like that. All the PS4 or the game can recognise is that a DS4 is connected wired to the PS4, because the xim allows the DS4 inputs to be passed through but edited by the apex from what I believe so curious to how this is possible, I'd have to test it though

Just guessing here, but maybe on consoles the game treat all inputs the same, as only authorized controllers are work with them, but for PC it could be different approach, as any random 3rd party controller can be connected to PC.

But what i had tested yesterday - it could be not a DPI issue. Probably when my game treat all inputs as controller - it reduces weapon spread and increase AA. This what happened to me yesterday. As per instructional videos from XIM Gameplay on youtube - if settings are not set properly it may confuse the AA algorithm, so this could be an answer. I tested new settings with 5000 DPI and seems all working with AA and no spread. Today will be testing comparing with my 3200 DPI setup.

Only change DPI 12000 and easy win in solo on the first match of the day
FOV 100
I think my problem is muscles memory with 3200 DPI

I don't get it man. You could just change sensitivity in XIM if it is a same setup.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: PampuGomez on 04:21 AM - 06/11/20
Djurik can you post some clips of your match or kill? And another question, can i make AN aux for recoil?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 11:50 PM - 06/12/20
Djurik can you post some clips of your match or kill? And another question, can I make AN aux for recoil?
Ok, I will try these few days to record some random kills to see how the sensitivity works for me and how the AA works. Not doing this coz I have old PC, maxed out Gen-4.. So my fps drops while recording and gameplay not so smooth lol...
And you can definitely create aux, you will only need to sacrifice one of the existing, like grenades. I didn't like that because it affects hipfire also (those aux linked to the left mouse button).
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: PampuGomez on 01:59 AM - 06/13/20
Djurik can you post some clips of your match or kill? And another question, can I make AN aux for recoil?
Ok, I will try these few days to record some random kills to see how the sensitivity works for me and how the AA works. Not doing this coz I have old PC, maxed out Gen-4.. So my fps drops while recording and gameplay not so smooth lol...
And you can definitely create aux, you will only need to sacrifice one of the existing, like grenades. I didn't like that because it affects hipfire also (those aux linked to the left mouse button).

Apex legends st (xbox) but I have this problem

https://ibb.co/rpFRcVH

Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 07:52 PM - 06/14/20
Hi. You mean only sensitivities did not pasted or all settings? If only senses then just put your values or manually from the 1st post settings list. Double check the code, something might be missing or accidentally deleted.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 10:00 PM - 06/14/20
Ok, here is some compilation recently made. But this with my latest settings of 5000 DPI. I found its better, AA stronger, turns faster and crosshair move more smooth. The complete settings for 5000 DPI i had added to the 1st post.

Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: dautruongybb on 02:49 AM - 06/15/20

Why I don't feel like AA! haizzzzz
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 03:00 AM - 06/15/20
Guess this season in order to feel more AA, need to sacrifice more on mobility by adding more SAB to HIP and also Smoothing. Also make senses slower and reduce the response curve. Try 1st settings from my 1st post, see if AA stronger for you - that settings was oriented more to AA, now more to mobility. Pls feedback later if you test it, want to know also.

By the way in latest settings i feel AA stronger only when using x2 scope, so not sure is because of scope or because the senses on x2 is slower
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: dautruongybb on 05:12 AM - 06/15/20
I use final config of you. Acl off.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 09:22 PM - 06/15/20
Like this can feel more AA?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: dautruongybb on 09:31 PM - 06/15/20
Like this can feel more AA?
yes, I feel like AA and easier to control
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: PampuGomez on 06:03 AM - 06/16/20
I use final config of you. Acl off.

ACL off or default?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: dautruongybb on 10:42 AM - 06/16/20
Acl off.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: PampuGomez on 11:57 AM - 06/16/20
Acl off.

yeah with acl off Aa is more but the recoil increase for me
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 10:22 PM - 06/16/20
Guys, yesterday i tested with my friend many settings, so here is the findings:
1. Reduce responce curve in ALC - AA increase (i set 2 click left from default)
2. Add more SAB to hip - AA increase (i set mine to 50)
3. Add smoothing to hip and ads (i added 5 to hip and 15 to ads)
4. Tried back TF2 settings with 5000 dpi and above changes - AA strong again

So in the settings 1-3 as i said earlier - sacrifice mobility for stronger AA, it works, very sticky now. For item-4, as someone said in this forum this probably server related, coz few weeks after S5 out i had no AA on TF2, but had it on Apex ST, now i have it back on TF2, but don't have on Apex (i tried with above changes also, no so sticky).

So just keep a few settings on XIM and switch back and forth as needed.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: PampuGomez on 10:00 AM - 06/17/20
Guys, yesterday i tested with my friend many settings, so here is the findings:
1. Reduce responce curve in ALC - AA increase (i set 2 click left from default)
2. Add more SAB to hip - AA increase (i set mine to 50)
3. Add smoothing to hip and ads (i added 5 to hip and 15 to ads)
4. Tried back TF2 settings with 5000 dpi and above changes - AA strong again

So in the settings 1-3 as i said earlier - sacrifice mobility for stronger AA, it works, very sticky now. For item-4, as someone said in this forum this probably server related, coz few weeks after S5 out i had no AA on TF2, but had it on Apex ST, now i have it back on TF2, but don't have on Apex (i tried with above changes also, no so sticky).

So just keep a few settings on XIM and switch back and forth as needed.

yeah with tf2 AA is better but I have a problem with my inventory, Tab is my bottom key to open the inventory but also open the menu to exit (there's no another bottom associated to Tab)
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: dautruongybb on 10:06 AM - 06/17/20
I really can't control mouse, when use config of you!
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 10:08 AM - 06/17/20
Hi. What i know is a controller original binding, press Tab - go to inventory, hold Tab - go to menu. You cannot separate them. If this is what you mean.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 10:10 AM - 06/17/20
I really can't control mouse, when use config of you!
Haha.. what happened. Which config you using? There are few. Last 2 in my 1st post is mobility oriented and mouse is very responsive. But it adjusted as close to real PC feel as possible. My last few post is AA oriented, more gentle, like controller feel
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: dautruongybb on 10:51 AM - 06/17/20
i use Version-2 - 5000 DPI. How setting mouse liver with pc? when ads zoom, crosshair Move very fast. I could not make it
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 12:00 PM - 06/17/20
Its response curve make it like this. Can shift slider more to default line it won't happen. Maybe 1-2 click to the left from default line.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: PampuGomez on 12:46 PM - 06/17/20
Hi. What i know is a controller original binding, press Tab - go to inventory, hold Tab - go to menu. You cannot separate them. If this is what you mean.

But I don't know why it work sometimes and sometimes no and I can't use my mouse to pick and drop, can you show me your conf about inventory and loot?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 09:12 PM - 06/17/20
But I don't know why it work sometimes and sometimes no and I can't use my mouse to pick and drop, can you show me your conf about inventory and loot?

Hi. In my settings there is Auxillary called - Mouse move. For my mouse it is set to button 4 if I'm not wrong, which is the button shown below on picture. When i hold it - i can move mouse normally in inventory and menus. But during loot i have Auxillary called - looting, for me i bind it to R, when i hold this button during loot - i can move mouse normally, scroll items up and down, and with left/right mouse buttons - pick and drop items. You may change this binding to your own.
(https://i.imgur.com/1tY4ATH.jpg)
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: PampuGomez on 06:14 AM - 06/18/20
But I don't know why it work sometimes and sometimes no and I can't use my mouse to pick and drop, can you show me your conf about inventory and loot?

Hi. In my settings there is Auxillary called - Mouse move. For my mouse it is set to button 4 if I'm not wrong, which is the button shown below on picture. When i hold it - i can move mouse normally in inventory and menus. But during loot i have Auxillary called - looting, for me i bind it to R, when i hold this button during loot - i can move mouse normally, scroll items up and down, and with left/right mouse buttons - pick and drop items. You may change this binding to your own.
(https://i.imgur.com/1tY4ATH.jpg)

thanks man, another stupid question your firmware is 307?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 08:51 PM - 06/18/20
ya, im using latest. 307 now
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: ehfaz on 08:36 AM - 06/19/20
Guys, yesterday i tested with my friend many settings, so here is the findings:
1. Reduce responce curve in ALC - AA increase (i set 2 click left from default)
2. Add more SAB to hip - AA increase (i set mine to 50)
3. Add smoothing to hip and ads (i added 5 to hip and 15 to ads)
4. Tried back TF2 settings with 5000 dpi and above changes - AA strong again

So in the settings 1-3 as i said earlier - sacrifice mobility for stronger AA, it works, very sticky now. For item-4, as someone said in this forum this probably server related, coz few weeks after S5 out i had no AA on TF2, but had it on Apex ST, now i have it back on TF2, but don't have on Apex (i tried with above changes also, no so sticky).

So just keep a few settings on XIM and switch back and forth as needed.

I have have been following this thread and it has helped be a lot to understand. Thank you.

1. Are all the game settings at default except for the changes your mentioned above?

2. 5000 DPI on mouse, what polling rate are you using on mouse and XIM?

3. Are you still using the ballistic curve from your first post?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Malinkadink on 10:35 AM - 06/19/20
I'm not one to judge but isn't this basically cheating in a sense that using a mouse on PC with aim assist is like using a soft lock aimbot? I've never tried but it sounds like there are shortcomings. As a veteran fps player on PC it just makes more sense use the mouse natively with no aim assist at 240hz if your PC is strong enough.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: jd394y on 12:16 PM - 06/19/20
I'm not one to judge but isn't this basically cheating in a sense that using a mouse on PC with aim assist is like using a soft lock aimbot? I've never tried but it sounds like there are shortcomings. As a veteran fps player on PC it just makes more sense use the mouse natively with no aim assist at 240hz if your PC is strong enough.

I mean lol... canít be as bad as using a mouse with aim assist against controller players lol???
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 09:42 PM - 06/19/20
I have have been following this thread and it has helped be a lot to understand. Thank you.

1. Are all the game settings at default except for the changes your mentioned above?

2. 5000 DPI on mouse, what polling rate are you using on mouse and XIM?

3. Are you still using the ballistic curve from your first post?

Thx man. I shared it for everyone use.
Items 1-3 - I had updated my 1st post with current settings (Version 3 with 5000 DPI). Removed ballistic curve for now because was testing AA behaviour with clean ADS. Now when everything is works maybe will add it to try. You may just add see if it works for you.

I'm not one to judge but isn't this basically cheating in a sense that using a mouse on PC with aim assist is like using a soft lock aimbot? I've never tried but it sounds like there are shortcomings. As a veteran fps player on PC it just makes more sense use the mouse natively with no aim assist at 240hz if your PC is strong enough.
Even with this slight help from AA - you still need to be good to smack that 20 bomb.. if people r dumb, even with real aimbot also can lose. If you are good, you can do it without AA too, but more sweaty. Everyone is using it for its own purpose. My own purpose is that something wrong with my hand muscle, so when i move it really slow during tracking it just start hopping and skipping pixels randomly. Dunno why like this. So if i set my normal PC mouse too slow to eliminate this - recoil is unbearable, up/down catching guys also very hard, close range ads too slow. If i set ADS faster - hand skipping pixels a lot and tracking no good.
So XIM solved my problem with this, i still have my usual sensitivity, which is slows down on enemy, so i can tracking enemies. The downside is only movement with restricted speed and less buttons shortcuts.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: PampuGomez on 05:04 AM - 06/20/20
New st titan 2 is out and the old stop work for me.
Copy and paste your settings in st apex and it works
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: dautruongybb on 07:46 AM - 06/20/20
New st titan 2 is out and the old stop work for me.
Copy and paste your settings in st apex and it works
You use config? You can share picture setting acl in game?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: PampuGomez on 09:09 AM - 06/20/20
New st titan 2 is out and the old stop work for me.
Copy and paste your settings in st apex and it works
You use config? You can share picture setting acl in game?

Just Copy the settings in st apex, also same acl
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 07:34 PM - 06/20/20
Ya, new settings is better, no more crosshair jitter issue in TF2 ST. Have abit but very minor. I was able to set response curve higher without jitter
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: ehfaz on 04:20 AM - 06/21/20
Ya, new settings is better, no more crosshair jitter issue in TF2 ST. Have abit but very minor. I was able to set response curve higher without jitter

Hey man, are you still using the Titalfall 2 ST even after the update or are you back in Apex Legends ST?

What do you mean by "response curve higher"?   What is your response curve setting currently? Is it still at 2 clicks from the default line?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 07:35 PM - 06/21/20
Yeah, after the update im continue using Titanfall 2 settings, because as i tested in earlier post the AA is more sticky in TF2 now. With a new update movement is still responsive but with almost no jitter. I make it -3 clicks now for curve and is still good, bit i played few games only. Will be testing more today. (Redused ADS too, now i think is 2.20 for me)
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: ehfaz on 08:36 AM - 06/22/20
Yeah, after the update im continue using Titanfall 2 settings, because as i tested in earlier post the AA is more sticky in TF2 now. With a new update movement is still responsive but with almost no jitter. I make it -3 clicks now for curve and is still good, bit i played few games only. Will be testing more today. (Redused ADS too, now i think is 2.20 for me)

Hey, thank you for your reply.

I am wondering whether increasing sensitivity in the app will decrease AA. I follow your config but turning seems slow for me so I want to increase sensitivity in the app. Will it break the AA?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: PampuGomez on 09:48 AM - 06/22/20
Yeah, after the update im continue using Titanfall 2 settings, because as i tested in earlier post the AA is more sticky in TF2 now. With a new update movement is still responsive but with almost no jitter. I make it -3 clicks now for curve and is still good, bit i played few games only. Will be testing more today. (Redused ADS too, now i think is 2.20 for me)

Testing slow sync in ads and works great for me
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: VNnaD on 01:56 AM - 06/23/20
Can use this config for MW/WARZONE ?
Or maybe you can create one for him !?
Thanks alot !!
 :)
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 05:55 AM - 06/23/20
Hey, thank you for your reply.

I am wondering whether increasing sensitivity in the app will decrease AA. I follow your config but turning seems slow for me so I want to increase sensitivity in the app. Will it break the AA?

If slow comparing to normal PC mouse, then can't do anything, its a XIM restrictions, if you know it and it just slow can try increase responce curve. Increase senses will not break AA, in my tests it could only reduce strength. You can also set SAB in HIP settings to OFF, now its 50.

Can use this config for MW/WARZONE ?
Or maybe you can create one for him !?
Thanks alot !!
 :)

Apex and Titanfall 2 created on the same engine that why translation in XIM quite similar, but MW not sure built on which one. If same engine then can try, just copy paste the settings and redo keybinds. If not - got to see settings from console guys here and adjust for your liking. I don't have this game, barely enough time for Apex.. Haha..
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: dautruongybb on 08:29 PM - 06/25/20
Hey, thank you for your reply.

I am wondering whether increasing sensitivity in the app will decrease AA. I follow your config but turning seems slow for me so I want to increase sensitivity in the app. Will it break the AA?

If slow comparing to normal PC mouse, then can't do anything, its a XIM restrictions, if you know it and it just slow can try increase responce curve. Increase senses will not break AA, in my tests it could only reduce strength. You can also set SAB in HIP settings to OFF, now its 50.

Can use this config for MW/WARZONE ?
Or maybe you can create one for him !?
Thanks alot !!
 :)

Apex and Titanfall 2 created on the same engine that why translation in XIM quite similar, but MW not sure built on which one. If same engine then can try, just copy paste the settings and redo keybinds. If not - got to see settings from console guys here and adjust for your liking. I don't have this game, barely enough time for Apex.. Haha..
you use Ballistic Curve? can share with me? pls
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: hurtmep1nty on 10:01 AM - 06/26/20
Rocking the new 5k setting with Apex ST..... Been lazing people. Had a 23 kill game last night (on pc).

The main issue with this game is definitely the servers. Basically, they are trash. 1 out of 4 games is a good one (connection wise) and they hide the lag quite nicely, but it's there.

Keep up the great work on this profile!
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: dautruongybb on 08:49 PM - 06/26/20
Rocking the new 5k setting with Apex ST..... Been lazing people. Had a 23 kill game last night (on pc).

The main issue with this game is definitely the servers. Basically, they are trash. 1 out of 4 games is a good one (connection wise) and they hide the lag quite nicely, but it's there.

Keep up the great work on this profile!
You can share setting ALC ingame? PLS
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: hurtmep1nty on 09:34 PM - 06/26/20
Quote
You can share setting ALC ingame? PLS

Same as on the first page :) under the 5k st.

Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: dautruongybb on 12:30 AM - 06/27/20
Quote
You can share setting ALC ingame? PLS

Same as on the first page :) under the 5k st.
Did you shoot accurately at a distance?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 08:19 AM - 06/27/20
Did you shoot accurately at a distance?

Its jitter a little for distance, but when the enemy is there the AA will slow it down, so it won't be jittery. This is done in favor of a responsive turns. You can make 1 click closer to default for Response curve, it will be better, but turns will be slower..

Rocking the new 5k setting with Apex ST..... Been lazing people. Had a 23 kill game last night (on pc).

The main issue with this game is definitely the servers. Basically, they are trash. 1 out of 4 games is a good one (connection wise) and they hide the lag quite nicely, but it's there.

Keep up the great work on this profile!

Thx man.. From gamers for gamers.. FTW!!

you use Ballistic Curve? can share with me? pls

Not using now. I make my ads slower by itself, so it is slow now without curve, like this tracking is easier.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Giantman12345 on 03:57 AM - 06/30/20
Hey I've tried to run my Xim through my gaming laptop but it doesn't work. Is there anything that I need specifically to get it working.

I use PS4 dualshock 2.

Thanks for any help.

Should be working natively with Apex legends. I have 2 of the V2 controllers and both work fine.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: PampuGomez on 06:13 AM - 07/04/20
2 setting season 4 12000 dpi works great for me, last conf 5000 dpi stop work for me after the patch
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 12:34 AM - 07/06/20
2 setting season 4 12000 dpi works great for me, last conf 5000 dpi stop work for me after the patch
Lol. My Apex stop work for me after the patch. Keep crashing, freezing, game stutters..
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: PampuGomez on 05:43 AM - 07/06/20
2 setting season 4 12000 dpi works great for me, last conf 5000 dpi stop work for me after the patch
Lol. My Apex stop work for me after the patch. Keep crashing, freezing, game stutters..

nooooooo  :'(
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: PampuGomez on 02:42 PM - 07/10/20
Go back djurik, we need you
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 01:25 PM - 07/11/20
Hey.. i tried my 5k DPI settings - it works properly..
The only thing i notice is that it not always work and i belive is due to the bad connection to server or bad PC.. i have an old PC + recent patch make things for me even more worse till now - during the match with the same gun (in my case it was flatline with x2) i most of the time don't have AA, bit sometime it just start pulling like crazy. So just keep the settings that last worked for you and check PC performance or change server..
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Aesir4l on 08:18 PM - 07/15/20
Hey All, i saw alot of settings here on this forum and tried most of them also, but realized that they are all intended for consoles, so the feels not the same as used to play on PC. Saw also raged PC players quit XIM as they can't get close enough to that PC feel  ;D . Below is the video of gameplay with this settings. Don't judge too hard, this was 2nd or 3rd game after I woke up and few days was not playing, so decision making is slow, as well as movement and no so much action. Will try to retake next few week. Now also keep trying new settings, so the sensitivity a bit offset, coz I can't really match it with my PC settings with all those smoothing, steady aim, etc, so adjusting to my liking after each ST changes.


(https://i.imgur.com/Vb4sylD.png)

(https://i.imgur.com/IvLv0wX.png)

Pros of this setup:
* Fast movement, even those my XIM is flashing red, speed does not slowdown, however, flicks mouse movement needs to be a bit slower than PC, need to get used to it
* AA is medium strength, it helps slowdown crosshair, guide a bit, but not disturbing or jitter
* Looting boxes can scroll mouse up/down for items, and left/right mouse buttons operates as on PC, easy (Must Hold R to open loot box and continue holding it during loot)
* Right mouse button (on the side) is binded to move mouse cursor freely in game menus

1st Settings (OLD)
Code: [Select]
[b]Cons:[/b]
* Pls feedback, didn't notice any


[b]PC Settings:[/b]

DPI - 12000 (my mouse max)



XIM Settings (Did not upgrade to latest FW and Apex ST also previous, will add FW version later):

[b]HIP:[/b]
Sens - 4.50
Synchronize - Default
Smoothing - 2
Y/X - no changes
Steady Aim - 1.0
Boost - no changes
SAB - 20

[b]ADS:[/b]
Sens - 1.90
Synchronize - Common
Smoothing - 10
Y/X - 1.15
Steady Aim - 1.4
Boost - no changes
SAB - 100

* Changed Synchronize to Common as i feel it is a better AA than default, i played a few hours with this and it feels much much better this way. Not sure devs have any comments on it as HIP & ADS have 2 different synchronizations. 

[b]Apex In-Game settings:[/b]

[b]Video:[/b]
Playing at 720p now, as my PC is old, so only like this I can get steady 100 FPS to match with a monitor refresh rate (reduced from 120Hz to 100Hz)
FOV - 84

[b]Controller:[/b]
Menu cursor speed - center bar
rest no changes as I activate Advanced Look Controls

[b]ALC[/b]
Deadzone - 2 click right from empty bar
Outer Treshold - 1 click right from empty bar
Responce Curve - 2 click left from default bar

Yaw Speed - 3 click left from full bar
Pitch Speed - 3 click left from full bar
Turning Extra Yaw - default line
Turning Extra PItch - 0
Turning Ramp up time - 0
Turning Ramp up delay - 0

ADS Yaw Speed - 6 click left from full bar
ADS Pitch Speed - 2 click left from full bar
ADS Turning Extra Yaw - 0
ADS Turning Extra PItch - 0
ADS Turning Ramp up time - 0
ADS Turning Ramp up delay - 0

[b]Per Optic sensitivity (feels good with any optic attachment):[/b]
x1 - 1.0
x2 - 1.1
all others - 1.2

Alternatively, just copy my code and adjust to your liking:

>>> XIM APEX [Apex 12k DPI] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

(I copy this settings before adjusting HIP/ADS sensitivity and sinchronization, so if u copy this code - adjust settings manually based on the ones given above)

Pls try and comment what can be adjusted/improved. Guess if you try for console - your AA will be way too strong and movements/aim probably will not be good.


2nd Settings, Lasted Whole Season-4 (OLD)
Code: [Select]
PC Settings:
DPI - 12000 (my mouse max) - Latest changes is DPI-3200, so only sensitivity below adjust to your liking, the rest no changes.

XIM Settings (Did not upgrade to latest FW):
Titanfall 2 settings (XboxOne)

HIP:
Sens - 4.50
Synchronize - Default
Smoothing - 2
Y/X - no changes
Steady Aim - 1.0
Boost - no changes
SAB - OFF

ADS:
Sens - 1.30
Synchronize - Common
Smoothing - 15
Y/X - 1.10
Steady Aim - 0
Boost - no changes
SAB - 100

* Changed Synchronize to Common as i feel it is a better AA than default, i played a few hours with this and it feels much much better this way. Not sure devs have any comments on it as HIP & ADS have 2 different synchronizations.

Apex In-Game settings:

Video:
Playing at 720p now, as my PC is old, so only like this I can get steady 100 FPS to match with a monitor refresh rate (reduced from 120Hz to 100Hz)
FOV - 84

Controller:
Menu cursor speed - center bar
rest no changes as I activate Advanced Look Controls

ALC
Deadzone - 2 click right from empty bar
Outer Treshold - 1 click right from empty bar
Responce Curve - 1 click left from default bar

Yaw Speed - 3 click left from full bar
Pitch Speed - 3 click left from full bar
Turning Extra Yaw - default line
Turning Extra PItch - 0
Turning Ramp up time - 0
Turning Ramp up delay - 0

ADS Yaw Speed - 6 click left from full bar
ADS Pitch Speed - 2 click left from full bar
ADS Turning Extra Yaw - 0
ADS Turning Extra PItch - 0
ADS Turning Ramp up time - 0
ADS Turning Ramp up delay - 0

Per Optic sensitivity (feels good with any optic attachment):
x1 - 1.0
x2 - 1.1
all others - 1.2


3rd Settings (Current) - Season-5 (for my tests this settings gives me min 10-15 kills per game with at least 3k+ damage almost every time)

Version-1 - 3200 DPI

Windows:
Mouse - default settings
Mouse Refresh rate - 500Hz
DPI-3200
Xim Refresh rate - 500Hz
Xim FW - Latest as of now
XIM Game ST - Latest as of now

In Game Settings:
Video:
Playing at 720p now, refresh rate 100Hz
FOV - 86

Controller:
Menu cursor speed - center bar
rest no changes as I activate Advanced Look Controls

ALC
Deadzone - 2 click right from empty bar
Outer Treshold - 1 click right from empty bar
Responce Curve - 4 click left from default bar

Yaw Speed - 3 click left from full bar
Pitch Speed - 3 click left from full bar
Turning Extra Yaw - default line
Turning Extra PItch - 0
Turning Ramp up time - 0
Turning Ramp up delay - 0

ADS Yaw Speed - 6 click left from full bar
ADS Pitch Speed - 2 click left from full bar
ADS Turning Extra Yaw - 0
ADS Turning Extra PItch - 0
ADS Turning Ramp up time - 0
ADS Turning Ramp up delay - 0

Per Optic sensitivity (feels good with any optic attachment):
x1 - 1.0
x2 - 1.1
all others - 1.2

Settings in XIM:

Apex Legends ST

HIP:
Sens - 18
Synchronize - Default
Smoothing - 0
Y/X - 1.10
Steady Aim - 15.0
Boost - no changes
SAB - OFF

ADS:
Sens - 10
Synchronize - Default
Smoothing - 15
Y/X - 1.10
Steady Aim - 0
Boost - no changes
SAB - 100

ADS Ballistic curve:
Code: [Select]
>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:gACAPYDAgWqCJYL9g+CE44WmhmeHMAf8CMgJlApgCywL+AzEDZAOXA8oD/QQwBGMElgTJBPwFLwViBZUFyAX7Bi4GYQaUBscG+gctB2AHkwfGB/kILAhfCJIIxQj4CSsJXgmRCcQ:X5BC
<<< XIM APEX END COPY <<<

The code is for the above settings (including ballistic curve):
Code: [Select]
>>> XIM APEX [Apex 3200 DPI] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<


Version-2 - 5000 DPI

Differences highlighted in RED.

Windows:
Mouse - default settings
Mouse Refresh rate - 500Hz
DPI-5000
Xim Refresh rate - 500Hz
Xim FW - Latest as of now (307)
XIM Game ST - Latest as of now

In Game Settings:
Video:
Playing at 720p now, refresh rate 120Hz
FOV - 86

Controller:
Menu cursor speed - center bar
rest no changes as I activate Advanced Look Controls

ALC
Deadzone - 2 click right from empty bar
Outer Treshold - 1 click right from empty bar
Responce Curve - 2 click left from default bar

Yaw Speed - 3 click left from full bar
Pitch Speed - 3 click left from full bar
Turning Extra Yaw - default line
Turning Extra PItch - 0
Turning Ramp up time - 0
Turning Ramp up delay - 0

ADS Yaw Speed - 6 click left from full bar
ADS Pitch Speed - 2 click left from full bar
ADS Turning Extra Yaw - 0
ADS Turning Extra PItch - 0
ADS Turning Ramp up time - 0
ADS Turning Ramp up delay - 0

Per Optic sensitivity (feels good with any optic attachment):
x1 - 1.0
x2 - 1.1
all others - 1.2

Settings in XIM:

Titanfall-2 ST

HIP:
Sens - 9
Synchronize - Default
Smoothing - 5
Y/X - 1.0
Steady Aim - 2.0
Boost - no changes
SAB - 50

ADS:
Sens - 2.80
Synchronize - Common
Smoothing - 15
Y/X - 1.15
Steady Aim - 0
Boost - no changes
SAB - 100

Can you please post picture of your ALC configurations? I cant understand, my english is very bad
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 07:52 PM - 07/17/20
Can you please post picture of your ALC configurations? I cant understand, my english is very bad

Here it is man..

(https://i.imgur.com/D3jIhJc.png)

By the way, tried same 5k settings but with Apex Legends ST - works better now, AA was much stronger also.. So You just need to have a few settings on standby and swap them over once one of them behave odd. Is something with Apex servers or devs just changing something.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: PampuGomez on 04:05 AM - 07/19/20
Can you please post picture of your ALC configurations? I cant understand, my english is very bad

Here it is man..

(https://i.imgur.com/D3jIhJc.png)

By the way, tried same 5k settings but with Apex Legends ST - works better now, AA was much stronger also.. So You just need to have a few settings on standby and swap them over once one of them behave odd. Is something with Apex servers or devs just changing something.

different alc bro? it's not the same
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: CH3NEY on 10:36 PM - 07/20/20
are u using the 5k settings with the ballistic curve?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: M2we on 05:22 PM - 07/23/20
what are your Apex Legends per optic sensitivities?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 11:16 PM - 07/27/20
are u using the 5k settings with the ballistic curve?
Nope, switched off now. Sometimes it works sometimes not. So now perform better without it

what are your Apex Legends per optic sensitivities?
Per Optic sensitivity (feels good with any optic attachment):
x1 - 1.0
x2 - 1.1
all others - 1.2
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: yasin on 01:44 AM - 07/29/20
Did you make any changes to your original 5k st?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 11:57 PM - 07/30/20
Did you make any changes to your original 5k st?
Nope, all the way same, only swithing between Apex and TF ST
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: KochengOren on 12:57 AM - 08/02/20
Did you make any changes to your original 5k st?
Nope, all the way same, only swithing between Apex and TF ST

Hi, sorry if this has been asked before, but what's your in-game sensitivity settings? Default (5), 7 or max (20)?
Thanks in advance.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: PampuGomez on 04:54 PM - 08/06/20
Any news? new setup?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: YoshzSir on 06:14 PM - 08/08/20
its def weird on PC bc you can tell the the ST reacts and behaves differently than on console lol (reacts BETTER imo).All i did for the healing / shield wheel is

New Subconfig:

ACTIVATION: 3 ( 3 is normally my Healing / Shielding key bind so I used it to Activate + mouse around the wheel better)

AIM:

15 Sensitivity
Sync: Default
Boost: 200

and that's it. Super smooth, zero issues with choosing between all heals and shields.

Thx, will try tonight. But whats your DPI, Mouse refresh rate for PC/XIM and in Game FOV (just in case its affects also). Apex ST or TF2?
I think the last time I have smooth healing wheel is when I had 1000hz on mouse and XIM, I changed to 500hz, maybe this one also affect. Will try to play with 1000hz tonight

Iím playing on a 240hz monitor at a steady 144+FPS. Iím using your titan fall 2 setup but canít seem to replicate your strong AA, any pointers would be helpful on how to increase the AA.

Thank you for your configs!

Mouses:
G305 Wireless
G502
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: mmotti on 09:04 PM - 08/09/20
Has anyone tested the feasibility of these settings on console?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Bb4life1991 on 06:18 PM - 08/10/20
Im surprised for pc feel you guys dont use 1000hz an max dpi when i lower dpi or hertz i instantly just feel like its slower an less responsive (which to me isnt pc like) but idk maybe its in my head
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: SMPhoo on 06:17 PM - 08/15/20
Interested in giving this a go as I play PC.

So firstly, the one thing I've noticed with this setup and a few others is an inconsisteny with mouse movement speed.
Take the range for example. Around look it feels the quickest, then targets a bit slower, but when nothing is in view, it seems to slow down a lot. Am I doing something wrong?

And I noticed you have to setups, one for 100hz and one at 120hz.
Does this really make a difference as I play at 240hz?

Thanks
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Noslen on 09:20 AM - 08/18/20
Interested in giving this a go as I play PC.

So firstly, the one thing I've noticed with this setup and a few others is an inconsisteny with mouse movement speed.
Take the range for example. Around look it feels the quickest, then targets a bit slower, but when nothing is in view, it seems to slow down a lot. Am I doing something wrong?

And I noticed you have to setups, one for 100hz and one at 120hz.
Does this really make a difference as I play at 240hz?

Thanks

I've been fighting this same issue since the start of last season, also not sure if I have been doing anything wrong.

I upped my DPI to 12000 and play on 144hz.

Been trying to change what I can that might help, but no use.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: SMPhoo on 04:22 PM - 08/18/20
Interested in giving this a go as I play PC.

So firstly, the one thing I've noticed with this setup and a few others is an inconsisteny with mouse movement speed.
Take the range for example. Around look it feels the quickest, then targets a bit slower, but when nothing is in view, it seems to slow down a lot. Am I doing something wrong?

And I noticed you have to setups, one for 100hz and one at 120hz.
Does this really make a difference as I play at 240hz?

Thanks

I've been fighting this same issue since the start of last season, also not sure if I have been doing anything wrong.

I upped my DPI to 12000 and play on 144hz.

Been trying to change what I can that might help, but no use.

I'm really wanting to give this a go but haven't just yet.
I don't know why, but the weird speed ups and slow downs of cursor speed throws me off and I'm not sure why it does it?
I guess around targets I can assume thats AA kicking in, but around loot also, it just goes way quicker than the standard.

Also, it makes looting really difficult in boxes and inventory, with reverse controls, even in the peekaboo settings where you hit tab, I always forget and feels real clunky.

It's a shame really
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: PampuGomez on 06:58 AM - 08/26/20
news?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 04:20 AM - 09/08/20
Heyy.. Currently no news for this, as my PC refusing to run Apex.. Will be back in near future when i save up enough for a new set.. Currently im busy with my 2 YouTube channels, will create 1 more for Apex once have new PC. Take the templates from the 1st post and edit for your liking, it seems also that every season it has to be finetune too.

I saw the posts about slow movement - that is not settings, its a Xim limitations.

Regarding that sometimes mouse move faster when loot - for me it was happened because my loot button is bind to the settings page in Xim and there sensitivity is higher, so just match it to your normal senses and it will not kick alot.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: tayfurdude on 11:51 AM - 09/09/20
(https://i.ibb.co/QcNJ4fd/ALC-Settings-1.jpg)
(https://i.ibb.co/vmjRrYc/ALC-Settings-2.jpg)
(https://i.ibb.co/kyjjv8s/Video-settings.jpg)

Version 2 - 5000 DPI
Running with Titanfall 2 PS4 config on Xim apex - The same config as you mentioned on first message.
120 hz monitor settings, 720p video settings, 500 hz on mouse and on xim apex. My mouse runs on 5040 dpi.

But still my mouse jittery as hell. It's not possible to make slow movement - my aim jumps around.

Could you please tell me where is the mistake? :)
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 11:37 PM - 09/09/20
Mybe PS4 controller behave differently, this setup was done with XBOX One controller, can try 2 things:
1. Move Response Curve slider in Controller settings more to the center line or even can try beyond the line to the right (Now yours looks like 3 click left from the line).
2. Create Apex Legends settings and copy all data from TF to Apex Legends
3. Check Apex Legends M+KB settings - Mouse sensitivity and ADS must maxed out (20).

Usually the 1st settings solved this for me. If none of this helps - try create NEW Apex legends profile with default settings and slowly adjust to your liking.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: aaaaras on 01:48 AM - 09/10/20
hey Djurik, thanks for the config they work well on PC

- i have that slow down mouse on ADS everytime i do small movement as well but only on 7-7 no ALC configuration, i do not have it on custom ALCs
- yet as every configuration on this site works only with custom ALC, i never tried no ALC config because of that slow/no moving mouse issue.

Do you know if no ALC provide more AA than with ALC ?
 i feel like ALC configuration are very aaccurate but i do not feel that ''guiding hand'' that helps me shred enemies
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 09:16 AM - 09/10/20
Do you know if no ALC provide more AA than with ALC ?
 i feel like ALC configuration are very aaccurate but i do not feel that ''guiding hand'' that helps me shred enemies

That is the reason every season i had fine tuned the settings. This is what everyone here wants to get )) but all with trial and errors, have adjust settings by small increment here and there and see what will work best for you.. I usually test it with live bots on firing range or with my friend. The best settings for me was when the crosshair starts to lead abit with the target - your "guiding hand", then i can assume that the settings are ok..

Too many variables here that affect this effect - DPI, HZ, SAB, Smoothing, Even Response Curve.. Need keep test and adjust..
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: aaaaras on 09:25 AM - 09/10/20
i see,
your config works well but
so far i just perform like i usually play with M+K

do you guys manage to do the finetune in firing range or do you need to test it in a game ?

also what feeling do i need to look for in firing range ?

Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: PampuGomez on 06:17 PM - 09/11/20
12000 dpi with no alc works best for me
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: aaaaras on 12:51 AM - 09/12/20
12000 dpi with no alc works best for me
how do you deal with crosshair not moving on the screen for small movement of the mouse while in ads ?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: PampuGomez on 04:21 AM - 09/12/20
12000 dpi with no alc works best for me
how do you deal with crosshair not moving on the screen for small movement of the mouse while in ads ?

I don't have that problem sorry, my problem is with alc on. when i hold the button ads my crosshair shaking and i don't know why
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Maria on 04:33 AM - 09/12/20
^ Most likely too low of a deadzone or response curve
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: PampuGomez on 01:34 AM - 09/13/20
^ Most likely too low of a deadzone or respond curve

today same problem, my crosshair shaking on ads with no alc.How can I solve?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: tayfurdude on 03:23 PM - 09/13/20
I started to use version 1. I have a question. How I can increase AA?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 12:03 AM - 09/14/20
I started to use version 1. I have a question. How I can increase AA?
I noticed AA had reduced for me quite a lot after Season-3, Probably devs had adjusted some mechanics. For me, if i still playing this, i would start from scratch and slowly fine-tune up all the settings again 1 by 1 to see which settings are most affecting AA.
Start from scratch i mean - no ALC, Default ST in XIM, 100% SAB and default all other Advanced settings. Once you feel that controller type motions in your hand see if the AA is better (which i guess will not) - start with DPI and Mouse/XIM Hz.. 
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: tayfurdude on 03:31 AM - 09/14/20
I started to use version 1. I have a question. How I can increase AA?
I noticed AA had reduced for me quite a lot after Season-3, Probably devs had adjusted some mechanics. For me, if i still playing this, i would start from scratch and slowly fine-tune up all the settings again 1 by 1 to see which settings are most affecting AA.
Start from scratch i mean - no ALC, Default ST in XIM, 100% SAB and default all other Advanced settings. Once you feel that controller type motions in your hand see if the AA is better (which i guess will not) - start with DPI and Mouse/XIM Hz..

Honestly I was using the version 2 and first day AA was good. Tracking was strong and no issue, then I had to reboot computer and boom AA is gone. Even though I did not change anything in configs. There is no explanation how and why it stopped. I removed all configs and done it again but no way.

Version 1 (for me) has more mobility than version 2. If I could a little more strong AA for version 1, it would be best for me.

I am quite new in this, as you know and I don't know how I can do it by myself. For now without any changes I am adjusting curves to get better AA. Is it possible with small changes to make better AA or it have to be from scratch?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: tayfurdude on 02:52 AM - 09/17/20
I think my Ds4 behaving differently because I can not get smooth aim in apex legends. Its shaking like crazy with your default settings. I have to increase curves to make it smooth but then it's too dull, slow reactions, limits my mobility, which is sucks.

If I get xbox one controller - do u think I can fix the problem?

And btw my alc settings is correct? I was posting it in your topic.

I am sorry if bothering you with many questions..
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: sikpup on 10:38 AM - 09/29/20
The xbox controller made a world of difference for me.  I had nothing but problems trying to use the DS4. 
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: dautruongybb on 09:07 PM - 09/29/20
The xbox controller made a world of difference for me.  I had nothing but problems trying to use the DS4.
Does it make a difference?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 10:53 PM - 10/14/20
Heyyy Everyone!! Been long time i didn't updated the settings.. But today i will bring you some happiness and chance to wrack up as much as you can till the season ends, hahaha..

Due to many requests in PM i had finally tried my Apex yesterday and despite it is still laggy, choppy for me and a lot of times dying where i not supposed to (like behind walls, etc) - i did figured out a good settings for now.. Get like 12-18 wins within a few hours and usually damage 2k-3k. AA is not that strong as in before S4, but it is noticeable now and helps tracking (Last time it can move by itself, now you have to guide a bit into enemy moving direction and AA will kick in). Moves are really fast now, think better than with ALC, due to controller accelerations, but i didn't notice any difference with direct input without acceleration, so i guess should not affect muscle memory that much. Crosshair no more jitters - it is steady now and shots are very firm and accurate.

This is basically - BACK to BASIC settings inspired by @Maria's config. Major changes are:
1. Mouse polling rate - 1000Hz on mouse and in XIM (After change on XIM need to un-plug and plug it back)
2. No more ALC (If you setup before - reset to default and OFF it)
3. +No Recoil control ;) (Latest XIM feature discovered by "@Year0")

Good Luck guys!! Latest settings updated in the 1st Post..
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: shthappensbro on 01:29 AM - 10/15/20
U play on pc  so this won't work good on xbox? 
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 03:54 AM - 10/15/20
U play on pc  so this won't work good on xbox? 
Ya man, probably will not, but you may try, I'm not sure. If take vise versa - those console settings doesn't work for me on PC.. You may find a lot of console settings here on this forum, PC settings is just a few only..

Similar settings to my current one you can find here - https://community.xim.tech/index.php?topic=85183.0 (its for console) i was inspired on this settings too. (Actually i think is not similar, is the same, some minor changes only adjusted for PC and DPI there is 3200, mine is 1600)
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: PampuGomez on 04:04 AM - 10/24/20
Have you try sync off on Ads? With it I Have more aim assist
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 03:53 AM - 10/25/20
Oh really. Will try this tonight. I only tried to use same settings with TF2 ST - it feels more responsive and more AA. You can try that too )).
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: ehfaz on 04:05 AM - 10/25/20
Hey, can you update us with the lastest settings that you are using right now?

U play on pc  so this won't work good on xbox? 
Ya man, probably will not, but you may try, I'm not sure. If take vise versa - those console settings doesn't work for me on PC.. You may find a lot of console settings here on this forum, PC settings is just a few only..

Similar settings to my current one you can find here - https://community.xim.tech/index.php?topic=85183.0 (its for console) i was inspired on this settings too. (Actually i think is not similar, is the same, some minor changes only adjusted for PC and DPI there is 3200, mine is 1600)
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 09:02 PM - 10/25/20
Hey, can you update us with the lastest settings that you are using right now?

Updated already bro, look for the 1st post - 4th Settings - Season-6 (Current)  :o . The only difference for me now is I'm using TF2 ST with the same settings. Feels better. AA is back ))

This results is with my stutters and all other sht like dying behind walls or hits not registers. If you have a decent PC, your results could be better than this ))
(https://i.imgur.com/LfzwQgu.jpg)

The powerhouse weapon combination now is Volt + Hemlock with x3 scope. But hemlock now become hard to find. Love this setup coz it's good for any range engagement.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: ehfaz on 09:21 PM - 10/26/20
Thank you for taking the time to do this for all of us. We really appreciate it.

1. I have been using your season 6 configs and they are good. I have an issue where I sometimes find it difficult to break IN the AA bubble. What settings should I mess with to fix this?

2.  Are you using any ALC or ALC off for this season?

3.  In your config, you wrote XIM Refresh rate 100 Hz (One hundred), is this a mistake? Did you mean 1000 (one thousand)?


Hey, can you update us with the lastest settings that you are using right now?

Updated already bro, look for the 1st post - 4th Settings - Season-6 (Current)  :o . The only difference for me now is I'm using TF2 ST with the same settings. Feels better. AA is back ))

This results is with my stutters and all other sht like dying behind walls or hits not registers. If you have a decent PC, your results could be better than this ))
(https://i.imgur.com/LfzwQgu.jpg)

The powerhouse weapon combination now is Volt + Hemlock with x3 scope. But hemlock now become hard to find. Love this setup coz it's good for any range engagement.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: 2in1Shampoo on 09:35 PM - 10/26/20
Prob already answered but will playing on pc w/ xim apex with console team mates put you in crossplay lobbies or controller lobbies?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Maria on 09:39 PM - 10/26/20
Prob already answered but will playing on pc w/ xim apex with console team mates put you in crossplay lobbies or controller lobbies?


PC only. There's no input based matchmaking.

Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: aA1zen on 05:26 AM - 10/27/20
thank you for sharing your amazing config! one question... would be kind if you can help me. I Struggle with the dpi it wont transfer to xim? it works just fine in windows but while in-game nothing happens :/ all help is appreciated.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: GSA_Kronos_GR on 10:15 AM - 10/27/20
Put your mouse Dpi in onboard memory not at the windows app
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 11:26 PM - 10/27/20
Thank you for taking the time to do this for all of us. We really appreciate it.
Yay!! Thx man.. Was struggling before to find out a right setup for PC, so decided to share it here to save everyone's time and have something to start off or even have a suggestions to improve.

Quote
1. I have been using your season 6 configs and they are good. I have an issue where I sometimes find it difficult to break IN the AA bubble. What settings should I mess with to fix this?
For me this happening from game to game, it should be something to do with Apex servers, so for me personally i either increase or decrease ADS sensitivity a bit (I do it usually during gameplay, if tracking target is always offset a bit - i will decrease, once i start fighting with AA - will increase). But XIM devs recommendation is to use Steady Aim - now is 1.6, can maybe try it higher a bit, like 1.8 or 2.

Quote
2.  Are you using any ALC or ALC off for this season?
Reset all settings and OFF ALC. Past few seasons no AA at all with ALC. But last time it was unplayable without ALC, now - movements surprisingly responsive. Thx for @Maria's setup i finally got it back now without ALC. Enjoying playing now ))

Quote
3.  In your config, you wrote XIM Refresh rate 100 Hz (One hundred), is this a mistake? Did you mean 1000 (one thousand)?
Woops, typo error, should be 1000Hz. Corrected it in the 1st post. Thx

Have you try sync off on Ads? With it I Have more aim assist
I think you are right, have slightly better AA, but ramped up my senses to 200 now with OFF Sync. Currently staying with it. Thx for suggestion.

Prob already answered but will playing on pc w/ xim apex with console team mates put you in crossplay lobbies or controller lobbies?
Nope. This been written on the Apex patch notes - console players will be thrown to PC player lobbies. If they throw PC players to Console lobbies - this will be a BIG mess!! And millions of haters, hahaha.. As @Maria mentioned there is no Controller detection also, even if you use XIM or Controller on PC - it is still detects you as PC..

thank you for sharing your amazing config! one question... would be kind if you can help me. I Struggle with the dpi it wont transfer to xim? it works just fine in windows but while in-game nothing happens :/ all help is appreciated.
Yup, as @GSA_Kronos_GR said - is something to do with the mouse and software. Coz usually for me - i will need to connect mouse to PC and adjust DPI in mouse software. After i save the settings - it is saved on mouse itself.
I just realize that i have similar issue with my Razer Deathadder mouse at my workplace. If i don't run the mouse software - all my settings doesn't save on mouse and back to default. lol. If this happening to you only after restarting PC - what you can try is connect mouse back to PC, recognize it back in mouse software, then connect back to XIM. Share your mouse model and brand, maybe someone have same model and can advise.


PS: Big downside of this settings is - they are probably gonna stop working on 04.11.20. Hahaha.. I mean with S7 update.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 08:52 PM - 10/28/20
Yesterday stressed out my system and ON recordings, so managed to record a gameplay with current settings. Is a 22 kills gameplay highlights :o . Recording is at 720p, but i can't go higher with my system.

Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Maria on 09:24 PM - 10/28/20
Dropping 20s in this SBMM era. Monster!


PS: Big downside of this settings is - they are probably gonna stop working on 04.11.20. Hahaha.. I mean with S7 update.
You'll know when your fully kitted R301 loses to a level 16 Bloodhound and his Spitfire lmao. But since you turned off Advanced look controls maybe the change won't be so drastic. If any.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: PampuGomez on 09:46 PM - 10/28/20
Yesterday stressed out my system and ON recordings, so managed to record a gameplay with current settings. Is a 22 kills gameplay highlights :o . Recording is at 720p, but i can't go higher with my system.


Can you post a guide to out crosshair please?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: ehfaz on 11:08 PM - 10/28/20
GG man. Are you playing with Sync Off, Titanlfall 2 ST? And your crosshair looks different.

Yesterday stressed out my system and ON recordings, so managed to record a gameplay with current settings. Is a 22 kills gameplay highlights :o . Recording is at 720p, but i can't go higher with my system.

Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 11:23 PM - 10/28/20
Dropping 20s in this SBMM era. Monster!
Hahaha.. That was just lucky match, and just nice when i start recording. Usually it 12-16. Now this happening very rare to me, depends on my PC mood, which is usually very bad. My plan was to record a few matches and glue some kills together to show how the settings behave on my end.

Can you post a guide to out crosshair please?
GG man. Are you playing with Sync Off, Titanlfall 2 ST? And your crosshair looks different.

Currently Sync OFF on ADS, TF2 ST.
I followed this guide for crosshair - https://www.youtube.com/watch?v=TUXtGDiX-7k
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: tayfurdude on 11:12 AM - 10/30/20
Hey man, nice to see you are back!

I will test out how things are with my setup but I couldn't manage to copy ballistice curve to my xim apex. Always gives error.. ehhhh.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 08:46 PM - 10/30/20
Ya, don't using any curve at the moment. Back to Basic  ;D.

Not sure about the error, you can try manually adjust roughly the same curve.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: PampuGomez on 03:38 PM - 11/02/20
with this method i have more aim assist on ads (PC)

https://community.xim.tech/index.php?topic=81768.0
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 08:23 PM - 11/02/20
with this method i have more aim assist on ads (PC)

https://community.xim.tech/index.php?topic=81768.0

Hi. Thx for info, think i saw this before and played around, but forgotten. Will surely try that tonight. Now with default ALC sometimes is really fighting vs AA. Hope this method helps.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 07:26 PM - 11/03/20
with this method i have more aim assist on ads (PC)

https://community.xim.tech/index.php?topic=81768.0

Wow man, thx for sharing, this method really works, yesterday i adjusted and immediately stays with it. For me AA become much more stronger and is really easier to tracking moving dudes now, was so easy now to full clip someone on the move without missing a shot.

With these settings something interesting and unusual happens to me yesterday:
I was shooting the guy, we were on grass platform, he run and step just 1 platform lower, so i could only see his chest and head, i didn't adjust my aim on him and i still continue to shoot and guess what.. Hahaha.. I see my overlay crosshair is still pointing to the center of the screen (the guy old location on my platform), but, the in-game crosshair moved down by itself like a magnet to the guy and i hit him all the bullets to the head..
Lool.. This was strange because when you playing, no matter what you do or how you turn - your crosshair is always on the center of the screen (normal scenario, not counting jumping, falling, etc), but here it went below the center of the screen by itself. I didn't see like this before.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: X-Strobe on 04:49 AM - 11/04/20
with this method i have more aim assist on ads (PC)

https://community.xim.tech/index.php?topic=81768.0

Wow man, thx for sharing, this method really works, yesterday i adjusted and immediately stays with it. For me AA become much more stronger and is really easier to tracking moving dudes now, was so easy now to full clip someone on the move without missing a shot.

With these settings something interesting and unusual happens to me yesterday:
I was shooting the guy, we were on grass platform, he run and step just 1 platform lower, so i could only see his chest and head, i didn't adjust my aim on him and i still continue to shoot and guess what.. Hahaha.. I see my overlay crosshair is still pointing to the center of the screen (the guy old location on my platform), but, the in-game crosshair moved down by itself like a magnet to the guy and i hit him all the bullets to the head..
Lool.. This was strange because when you playing, no matter what you do or how you turn - your crosshair is always on the center of the screen (normal scenario, not counting jumping, falling, etc), but here it went below the center of the screen by itself. I didn't see like this before.

Hello ! Can I use this settings on ps4 xim ? 👀
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: PampuGomez on 04:51 AM - 11/04/20
with this method i have more aim assist on ads (PC)

https://community.xim.tech/index.php?topic=81768.0

Wow man, thx for sharing, this method really works, yesterday i adjusted and immediately stays with it. For me AA become much more stronger and is really easier to tracking moving dudes now, was so easy now to full clip someone on the move without missing a shot.

With these settings something interesting and unusual happens to me yesterday:
I was shooting the guy, we were on grass platform, he run and step just 1 platform lower, so i could only see his chest and head, i didn't adjust my aim on him and i still continue to shoot and guess what.. Hahaha.. I see my overlay crosshair is still pointing to the center of the screen (the guy old location on my platform), but, the in-game crosshair moved down by itself like a magnet to the guy and i hit him all the bullets to the head..
Lool.. This was strange because when you playing, no matter what you do or how you turn - your crosshair is always on the center of the screen (normal scenario, not counting jumping, falling, etc), but here it went below the center of the screen by itself. I didn't see like this before.

Sync on Ads off or default? I only try default with this method
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: aaaaras on 05:40 AM - 11/04/20
Hey djurik,
do you use small or none look deadzone ?
i feel like i have some jitter with small but nothing with none, it is also feel like more responsive ?

how are you playing on your side ?

Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 08:57 PM - 11/04/20
Hello ! Can I use this settings on ps4 xim ? 👀

You may try, some said it works good, if not, try @Maria's settings, is about the same but for console oriented
https://community.xim.tech/index.php?topic=85183.0

Sync on Ads off or default? I only try default with this method

OFF.

Hey djurik,
do you use small or none look deadzone ?
i feel like i have some jitter with small but nothing with none, it is also feel like more responsive ?

how are you playing on your side ?


Everything default, ALC OFF. Once i touch anything on movement in Apex in game settings - AA gone.. Wait if devs release separate ST for Apex. There we can play around with responsiveness
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: dautruongybb on 09:03 PM - 11/04/20
you can update change new?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 10:13 PM - 11/04/20
you can update change new?
Will update once i can get my hands to S7. Didn't tried it yet.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 07:45 PM - 11/05/20
you can update change new?

Tried S7 yesterday. Feels the same for me with current settings, i think this time they didn't touched the controller part. So no changes for me. Any feedback?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Maria on 11:38 PM - 11/05/20
with this method i have more aim assist on ads (PC)

https://community.xim.tech/index.php?topic=81768.0
Have you tried pairing it with the ADS AA booster?

https://youtu.be/hY6LqF7bLGo
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 03:25 AM - 11/06/20
I saw this video, but didn't tried bcos again it uses new Auxillary, so i didn't want to give up any existing. Hope devs can add more pages, i had also requested for this in the feature request thread.
Did you tried it? If it really have good effect, i may give up my nades Aux.

My next test in the list is:
1. Tourette Linear setup with PS4 ST and 4k DPI
2. My own settings with Tourette curve + just now heard from video that Smoothing should be 20 if Sync is OFF
3. Probably this AA booster i wan also to test out.. The curve looks fears. lol.

But i can't understand the logic behind this curve. Tourette can see that it slows your senses on start, which is good, because your hand is usually accelerated when you start to aim, but this fears curve - like fast/slow/fast/slow..  Only OBsIV knows the answer.. Haha
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 07:37 PM - 11/08/20
Have you tried pairing it with the ADS AA booster?
https://youtu.be/hY6LqF7bLGo

Hi.. Yeah, i tried it yesterday. Not sure, how it works, but, i think it is slightly better. 2-4k damage almost every match even on my broken game.. I think it works, coz even i have 3-5 kills in game, damage is till 2-3k.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Lordvader76 on 01:54 AM - 11/09/20
Have you tried pairing it with the ADS AA booster?
https://youtu.be/hY6LqF7bLGo

Hi.. Yeah, i tried it yesterday. Not sure, how it works, but, i think it is slightly better. 2-4k damage almost every match even on my broken game.. I think it works, coz even i have 3-5 kills in game, damage is till 2-3k.

Hi, could you share your settings for this? Thank you so much
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 04:00 AM - 11/09/20
Hi, could you share your settings for this? Thank you so much

Yeah man.. Tomorrow, as i need to turn on the PC to connect to my XIM..

I think i will just create a discord channel with my settings, so it will be easier to drop small updates or duplicate codes there, so you guys will also be easier to copy-paste it to XIM from discord mobile right?

Actually i thought of just make one channel with a separate groups for each guy creating and editing codes here for easy sharing and discussing (those who want to ofcourse). But not sure our XIM forum bosses ok with it?
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Lordvader76 on 06:15 AM - 11/09/20
That would be great
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: BossJ00 on 02:27 PM - 11/09/20
Would love to see this happen! Just got xim for pc - and trying to get used to the looting system.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 07:30 PM - 11/09/20
That would be great

There is an existing unofficial XIM group, now i talking to the admin to park there, see how it goes.

Would love to see this happen! Just got xim for pc - and trying to get used to the looting system.

It is pain in the @%% man. In my settings i make it easier to navigate there by holding an assigned button, so can use mouse to move around and scrolling by mouse wheel. But last time scroll was much faster, after S5 changes - it become very slow, i also dunno how to solve it. It is hard to quick swap armor now.
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: BossJ00 on 08:21 PM - 11/09/20

Yea dude... it's killing me - haha! But yeah I'm doing your "hold a button" during the looting process to get the mouse to move... but still after 2 years of PC and then going to XIM - so difficult.

When you updating the 1st page with your latest settings? Looking forward to using them! Thanks for doing this!
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: dautruongybb on 09:07 PM - 11/09/20
You can update new ss7? Thanks very much
Title: Re: Apex Legends XIM setting for PC (closest feel)
Post by: Djurik on 11:27 PM - 11/09/20
No changes for me for S7. I will just update the title. Some experimenting only here and there. But the settings are the same.
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-7)
Post by: CrazyGamer1019 on 11:45 AM - 11/10/20
XIM on PC is cheating.
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-7)
Post by: yasin on 04:26 PM - 11/10/20
XIM on PC is cheating.
ay little man your last post was asking about a good setting for pc so stop being hypocrite and let people enjoy games how ever they want to play. ps why you here if you think its cheating
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-7)
Post by: yasin on 04:29 PM - 11/10/20
people take so long time from they daily rooting  to test and do thing for best gaming experience and then this guy coming like *Pc xiM iTs cHeAtiNg*
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-7)
Post by: Djurik on 09:59 PM - 11/11/20
Lol..

Ok guyzz.. There is no response from admins on that Discord channel, so i had created one just for XIM Settings sharing. Join in here - https://discord.gg/rZAHr9BJw7 .

Who wants to post their settings there and manage own channel pls PM me on discord, i will create a separate channel with permissions. For now it is simple, don't really have much time to manage, but will give it a try.
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-8)
Post by: Djurik on 08:04 PM - 04/23/21
Heyyy.. recently decided to try back the XIM again, so updated the Settings for S8, was quite satisfied with it now, movements are about the same as my MKB setup, except the flicks ofcourse, but still can do it fast by moving mouse slowly. AA was surprisingly good - it does not kick in when you just aim or doing a small tracking, but when enemy jump, fast strafe, or runs - it will kick in, nice.. (I was laughing when I ADS Octane in 1m distance, then he Q away pass by me, the AA pulls over my aim by 180 degrees so fast, if someone spectate - sure report, looks like aimbot, lol).
See 1st post for the settings. Let me know how it goes for you.
Try not to change ALC, but adjust your senses through XIM, when I changing these values in ALC - AA just breaks.
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-9)
Post by: Djurik on 07:27 PM - 05/06/21
Yoo... Updated settings for Season 9. There are 2 options - Stronger AA and Weaker AA.. Strong AA feels like aimbot now, especially with x2 scope. If you dont have it, probably it is a server related issues, coz sometimes for me same settings can become 0 AA, i will just bear with it, or try to play abit with ADS Yaw Speed in ALC and XIM ADS Senses. These are the only 2 settings that affect AA for me (Actually only 1 - ADS Yaw, XIM senses use just to compensate back the changes). But do remember exact initial settings, if other day your changes stops working, just revert back to original and it will work again.
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-9)
Post by: Maria on 09:11 PM - 05/06/21
My PS friends are telling me that the ALC feels worse for them. For me it feels more responsive. Then again weaker AA is better for us Ximmers but perhaps worse for them controller players.
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-9)
Post by: Djurik on 11:59 PM - 05/06/21
This season 9 they did something to controller response configs or something else, when i 1st try to play i thought i did not plug in my XIM, lol, it is so responsive and turns are fast. 1st time i experience this with XIM for all past seasons..
About the AA - it depends on how it activates, when the dude moving slow and the AA kick in and mess it up - Controllers also hard to aim i guess. The thing is that the Season 8 settings AA was not kick in when enemy move slow or stand, only slow down abit, but not messing with the aim, but when the enemy start to quick strafe/run/jump - it was kick in right moment and follow like crazy.
I honestly no idea which exactly settings doing this, trials and errors. Now this settings is about the same, but sometimes mid range slow moving guys AA got mess up the aim.. But now AA feels more stronger when need it, settings are playable already. Next few weeks will finetune abit, havent tried with ADS Yaw Speed 300-500 range yet
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-9)
Post by: GGU_Atlas on 03:09 PM - 05/08/21
7th Settings - Season 9 (Current)
(Fast Moves, no shaky Crosshair and accurate aim, AA don't interfere to your aim, but when enemy is strafing or run/jump - it pulls the aim follow)

Discord discussion here - https://discord.gg/rZAHr9BJw7

This is a gameplay recording with this settings (its in 720p max, i can't go higher due to hardware limitations)
Old gameplay, but just keep it here till I have time to do a new one


Windows:
Mouse - default settings
Mouse Refresh rate - 1000Hz
DPI-3200
Xim Refresh rate - 1000Hz
Xim FW - Latest as of now
XIM Game ST - Latest as of now

In-Game Settings:
Video:
Playing at 1080p now, refresh rate 140Hz (Lock at 140, above this XIM become very slow)
FOV - 110


Controller:
Menu cursor speed - center bar
Sensitivity HIP/ADS - 7/6

ALC Settings:
Deadzone - 8%
OT - 2%
RC - 10

HIP
Yaw Speed - 380
Pitch Speed - 230
Rest - 0

ADS
Yaw Speed - 230
Pitch Speed - 320
Rest - 0



Per Optic sensitivity (feels good with any optic attachment):
x1 - 1.0
x2 - 1.1
all others - 1.2

Settings in XIM:

Apex Legends ST (I used Xbox)

HIP:
Sens - 20
Synchronize - Common
Smoothing - 10
Y/X - 1.00
Steady Aim - 1.0
Boost - 0
SAB - 30
(Added SAB in hope for hip to be more sticky, it does not affect movement like it did before, but if for some reasons you cannot move diagonally - set it OFF)

ADS:
Sens - 20
Synchronize - Common
Smoothing - 10
Y/X - 1.00
Steady Aim - 1.0
Boost - 0
SAB - 50


This setup there is strong AA (i feel it a bit stronger than S8). If you need less AA - set ADS Yaw Speed to 180 and compensate sensitivity in XIM (Set to 24 for example).
If you guys want to adjust sensitivity - do it in XIM, try not to change the values in ALC, when i tried to do so it breaks AA.


Old settings
Code: [Select]
[b]1st Settings (OLD)[/b]
DPI - 12000 (my mouse max)
[b]Apex In-Game settings:[/b]
[b]Video:[/b]
Playing at 720p now, as my PC is old, so only like this I can get steady 100 FPS to match with a monitor refresh rate (reduced from 120Hz to 100Hz)
FOV - 84
[b]Controller:[/b]
Menu cursor speed - center bar
rest no changes as I activate Advanced Look Controls
[b]ALC[/b]
Deadzone - 2 click right from empty bar
Outer Treshold - 1 click right from empty bar
Responce Curve - 2 click left from default bar

Yaw Speed - 3 click left from full bar
Pitch Speed - 3 click left from full bar
Turning Extra Yaw - default line
Turning Extra PItch - 0
Turning Ramp up time - 0
Turning Ramp up delay - 0

ADS Yaw Speed - 6 click left from full bar
ADS Pitch Speed - 2 click left from full bar
ADS Turning Extra Yaw - 0
ADS Turning Extra PItch - 0
ADS Turning Ramp up time - 0
ADS Turning Ramp up delay - 0

[b]Per Optic sensitivity (feels good with any optic attachment):[/b]
x1 - 1.0
x2 - 1.1
all others - 1.2

Alternatively, just copy my code and adjust to your liking:

>>> XIM APEX [Apex 12k DPI] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<





[b]2nd Settings, Lasted Whole Season-4 (OLD)[/b]
PC Settings:
DPI - 12000 (my mouse max) - Latest changes is DPI-3200, so only sensitivity below adjust to your liking, the rest no changes.
XIM Settings (Did not upgrade to latest FW):
Titanfall 2 settings (XboxOne)
Apex In-Game settings: Same as 1st Settings





[b]3rd Settings - Season-5 (OLD)[/b] (for my tests this settings gives me min 10-15 kills per game with at least 3k+ damage almost every time)
[u][b][color=green][size=15pt]Version-1 - 3200 DPI[/size][/color][/b][/u]
[b]Windows:[/b]
Mouse - default settings
Mouse Refresh rate - 500Hz
DPI-3200
Xim Refresh rate - 500Hz
Xim FW - Latest as of now
XIM Game ST - Latest as of now

[b]In Game Settings:[/b]
[b]Video:[/b]
Playing at 720p now, refresh rate 100Hz
FOV - 86

[b]Controller:[/b]
Menu cursor speed - center bar
rest no changes as I activate Advanced Look Controls

[b]ALC[/b]
Deadzone - 2 click right from empty bar
Outer Treshold - 1 click right from empty bar
Responce Curve - 4 click left from default bar

Yaw Speed - 3 click left from full bar
Pitch Speed - 3 click left from full bar
Turning Extra Yaw - default line
Turning Extra PItch - 0
Turning Ramp up time - 0
Turning Ramp up delay - 0

ADS Yaw Speed - 6 click left from full bar
ADS Pitch Speed - 2 click left from full bar
ADS Turning Extra Yaw - 0
ADS Turning Extra PItch - 0
ADS Turning Ramp up time - 0
ADS Turning Ramp up delay - 0

[b]Per Optic sensitivity (feels good with any optic attachment):[/b]
x1 - 1.0
x2 - 1.1
all others - 1.2

[b]Settings in XIM:[/b]

[b]Apex Legends ST[/b]

[b]HIP:[/b]
Sens - 18
Synchronize - Default
Smoothing - 0
Y/X - 1.10
Steady Aim - 15.0
Boost - no changes
SAB - OFF

[b]ADS:[/b]
Sens - 10
Synchronize - Default
Smoothing - 15
Y/X - 1.10
Steady Aim - 0
Boost - no changes
SAB - 100

[b]ADS Ballistic curve:[/b]
>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:gACAPYDAgWqCJYL9g+CE44WmhmeHMAf8CMgJlApgCywL+AzEDZAOXA8oD/QQwBGMElgTJBPwFLwViBZUFyAX7Bi4GYQaUBscG+gctB2AHkwfGB/kILAhfCJIIxQj4CSsJXgmRCcQ:X5BC
<<< XIM APEX END COPY <<<

[b]The code is for the above settings (including ballistic curve):[/b]
>>> XIM APEX [Apex 3200 DPI] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<


[u][b][color=green][size=15pt]Version-2 - 5000 DPI[/size][/color][/b][/u]
Differences highlighted in RED.
[b]Windows:[/b]
Mouse - default settings
Mouse Refresh rate - 500Hz
DPI-5000
Xim Refresh rate - 500Hz
Xim FW - Latest as of now (307)
XIM Game ST - Latest as of now

[b]In Game Settings:[/b]
[b]Video:[/b]
Playing at 720p now, refresh rate [color=red]120[/color]Hz
FOV - 86

[b]Controller:[/b]
Menu cursor speed - center bar
rest no changes as I activate Advanced Look Controls

[b]ALC[/b]
Deadzone - 2 click right from empty bar
Outer Treshold - 1 click right from empty bar
Responce Curve - [color=red]2[/color] click left from default bar

Yaw Speed - 3 click left from full bar
Pitch Speed - 3 click left from full bar
Turning Extra Yaw - default line
Turning Extra PItch - 0
Turning Ramp up time - 0
Turning Ramp up delay - 0

ADS Yaw Speed - 6 click left from full bar
ADS Pitch Speed - 2 click left from full bar
ADS Turning Extra Yaw - 0
ADS Turning Extra PItch - 0
ADS Turning Ramp up time - 0
ADS Turning Ramp up delay - 0

[b]Per Optic sensitivity (feels good with any optic attachment):[/b]
x1 - 1.0
x2 - 1.1
all others - 1.2

[b]Settings in XIM:[/b]
[b][color=red]Titanfall-2 ST[/color][/b]

[b]HIP:[/b]
Sens - [color=red]9[/color]
Synchronize - Default
Smoothing - [color=red]5[/color]
Y/X - [color=red]1.0[/color]
Steady Aim - [color=red]2.0[/color]
Boost - no changes
SAB - [color=red]50[/color]

[b]ADS:[/b]
Sens - [color=red]2.80[/color]
Synchronize - [color=red]Common[/color]
Smoothing - [color=red]15[/color]
Y/X - 1.[color=red]15[/color]
Steady Aim - 0
Boost - no changes
SAB - 100



Settings - Season-7 (OLD)

[b]Windows:[/b]
Mouse - default settings
Mouse Refresh rate - 1000Hz
DPI-1600
Xim Refresh rate - 1000Hz
Xim FW - Latest as of now
XIM Game ST - Latest as of now

[b]In Game Settings:[/b]
[b]Video:[/b]
Playing at 720p now, refresh rate 120Hz
FOV - 88

[b]Controller:[/b]
Menu cursor speed - center bar
Sensitivity HIP/ADS - 7/7
(If you guys used the previous settings and adjusted ALC - go to this settings again, find RESET SETTINGS option at the bottom and Reset all these. Then on Top of the page - Disable ALC)

[b]Per Optic sensitivity (feels good with any optic attachment):[/b]
x1 - 1.0
x2 - 1.1
all others - 1.2

[b]Settings in XIM:[/b]

[b]Apex Legends ST[/b] (Latest update - you can try same settings with TitanFall 2 ST, feels more responsive)

[b]HIP:[/b]
Sens - 34
Synchronize - Default
Smoothing - 8
Y/X - 1.00
Steady Aim - 2.0
Boost - 0
SAB - 30

[b]ADS:[/b]
Sens - 190
Synchronize - OFF
Smoothing - 10
Y/X - 1.00
Steady Aim - 1.6
Boost - 0
SAB - 100


[b]The code is for the above settings (this include no recoil control, adjust percentage to your liking in ADS settings under Movement, you will see current value is set to 8%. If you adjust sensitivity - then this figure might need to be adjusted as well. To test - just hold Fire button while ADS in Firing range and you will see the effect):[/b]
>>> XIM APEX [Apex New 1600 DPI] START COPY >>>

X5C: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:X5C

<<< XIM APEX END COPY <<<



Settings - Season-8 (OLD)

[b]Windows:[/b]
Mouse - default settings
Mouse Refresh rate - 1000Hz
DPI-3200
Xim Refresh rate - 1000Hz
Xim FW - Latest as of now
XIM Game ST - Latest as of now

[b]In-Game Settings:[/b]
Video:
Playing at 1080p now, refresh rate 140Hz
FOV - 110


[b]Controller:[/b]
Menu cursor speed - center bar
Sensitivity HIP/ADS - 7/6

[b]ALC Settings:[/b]
Deadzone - 8%
OT - 2%
RC - 10

HIP
Yaw Speed - 408
Pitch Speed - 300
Rest - 0

ADS
Yaw Speed - 300
Pitch Speed - 400
Rest - 0

Per Optic sensitivity (feels good with any optic attachment):
x1 - 1.0
x2 - 1.1
all others - 1.2

[b]Settings in XIM:[/b]

Apex Legends ST (I used Xbox)

HIP:
Sens - 26
Synchronize - Common
Smoothing - 5
Y/X - 1.00
Steady Aim - 1.0
Boost - 0
SAB - OFF

ADS:
Sens - 12
Synchronize - Common
Smoothing - 10
Y/X - 1.00
Steady Aim - 1.0
Boost - 0
SAB - OFF


If you guys want to adjust sensitivity - do it in XIM, try not to change the values in ALC, when i tried to do so it breaks AA


These settings feel pretty cracked with Y/X Ratio set to .8 or .9 for hip and ADS. Everything lazer beams
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-9)
Post by: Djurik on 07:05 PM - 05/09/21
But like tis you only increasing horizontal senses by sacrificing some vertical senses, i didnt see anyone go below 1.0
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-9)
Post by: Djurik on 07:26 PM - 05/14/21
Hi All,

Added my community-based V3 settings on 1st post. This is more to Linear setup with a quick mouse response and more control of your aim with less AA. Still working for more AA, but if your Aim is good, that is good enough, AA did help also.
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-9)
Post by: savimaster on 09:48 AM - 05/15/21
Since s9 controller feels like mouse on pc. Super responsive
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-9)
Post by: Djurik on 07:28 PM - 05/16/21
Yeah, noticed it straight after the update..
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-9)
Post by: Djurik on 09:06 PM - 06/02/21
aaaaand, we on top again  :)
By the way added some requirements for settings (To use ST4.2)

Will be trying to test out settings closer to XIM4:
Sync - Default
SAB - 0
Smoothing - 0
Polling - 125Hz

All these additional features were worked in S4,5, but now it's like 0 AA when you adding all those additional settings. Guessing Respawn might have implemented some kind of shadow detection for XIM players, they dont ban, but remove AA instead. Was blaming the servers or network before, but realize that even have a good connection, hitreg very good, almost no lags, but still 0 AA, even for those settings that was given aimbot like feelings before. Nothing has been changed.


To DEVS - if the above is true, we need to have a settings values for a RAW controller input (or at least closest to it), so we can set it as our starting values. For example now by default smoothing is 0, we increase it to smoothen higher DPI mouse inputs small jitters, so need to have some starting values for DPI ranges to have a controller like output as close as possible, at least for those commonly used 800, 3200, 5000, 10000, 20000. Last time (during S4 or 5) i tried Smoothing 20 - not able to even move properly, now 20 values, like no changes at all.
SAB starting values - 0 (or OFF?)
Polling rate - 125Hz (if you set 1000Hz maybe there are other settings to change to compensate it)
Sync - Default
Other settings i believe are just multipliers and will not affect anything, like X/Y ratio, steady Aim, boost

After default settings are met, we should not have any issues with the behaviour in game and it suppose to be as same as controller. Theeeen, we start to meddle with it and find settings that gives a good movement with least losses of XIM benefits.
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-9)
Post by: xploitsFPS on 09:34 PM - 06/02/21
aaaaand, we on top again  :)
By the way added some requirements for settings (To use ST4.2)

Will be trying to test out settings closer to XIM4:
Sync - Default
SAB - 0
Smoothing - 0
Polling - 125Hz

All these additional features were worked in S4,5, but now it's like 0 AA when you adding all those additional settings. Guessing Respawn might have implemented some kind of shadow detection for XIM players, they dont ban, but remove AA instead. Was blaming the servers or network before, but realize that even have a good connection, hitreg very good, almost no lags, but still 0 AA, even for those settings that was given aimbot like feelings before. Nothing has been changed.


To DEVS - if the above is true, we need to have a settings values for a RAW controller input (or at least closest to it), so we can set it as our starting values. For example now by default smoothing is 0, we increase it to smoothen higher DPI mouse inputs small jitters, so need to have some starting values for DPI ranges to have a controller like output as close as possible, at least for those commonly used 800, 3200, 5000, 10000, 20000. Last time (during S4 or 5) i tried Smoothing 20 - not able to even move properly, now 20 values, like no changes at all.
SAB starting values - 0 (or OFF?)
Polling rate - 125Hz (if you set 1000Hz maybe there are other settings to change to compensate it)
Sync - Default
Other settings i believe are just multipliers and will not affect anything, like X/Y ratio, steady Aim, boost

After default settings are met, we should not have any issues with the behaviour in game and it suppose to be as same as controller. Theeeen, we start to meddle with it and find settings that gives a good movement with least losses of XIM benefits.

I am gonna be trying your settings in the AM. For some reason it seems like no matter what settings I try from the forum the XIM has either input lag or the AA is to strong. At times I can do a full 180 with a swipe of my hand and other times I have to redrag my mouse across my mouse pad several times just to get turned around. I am not sure what the issue is exactly where it's a xim problem or a config problem. It has been driving me crazy though. I have been using the Titanfall ST for PS4 though on the PC.
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-9)
Post by: Djurik on 11:35 PM - 06/02/21
I am gonna be trying your settings in the AM. For some reason it seems like no matter what settings I try from the forum the XIM has either input lag or the AA is to strong. At times I can do a full 180 with a swipe of my hand and other times I have to redrag my mouse across my mouse pad several times just to get turned around. I am not sure what the issue is exactly where it's a xim problem or a config problem. It has been driving me crazy though. I have been using the Titanfall ST for PS4 though on the PC.

Yeh, these settings oriented for a better move and trying to preserve some AA. If you use 1st settings there - Must use XIMMR v4.2 (only 4.2 give a good movement with AA, you can try response curve set to 4), Version 3 no need 4.2 ximmr, but i have 0 AA on V3 currently. Both have a good movement without need to re drag).

At times I can do a full 180 with a swipe of my hand and other times I have to redrag my mouse across my mouse pad several times just to get turned around

For me i noted this caused by 2 items:
1. FPS. If i have above 140 FPS - movement become problem, sometime fast sometime slow, lock to 140 solve it
2. Response curve and deadzone. Each ST behaves differently with different settings. For example if you set V3 settings Deadzone above 0 - it will affect movement by alot
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-9)
Post by: Djurik on 12:04 AM - 06/14/21
Hii.. Updated settings to V4. Currently works well with good movement and good AA. Hope it will last, as i was really enjoying playing the past few days with these settings. Went back again to 10-15 kills per match with 2-4k damage.
Updates in the 1st post.
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-9)
Post by: Fabscher92 on 10:23 AM - 06/30/21
Lol..

Ok guyzz.. There is no response from admins on that Discord channel, so i had created one just for XIM Settings sharing. Join in here - https://discord.gg/rZAHr9BJw7 .

Who wants to post their settings there and manage own channel pls PM me on discord, i will create a separate channel with permissions. For now it is simple, don't really have much time to manage, but will give it a try.
Wich settings feels like Aimbot?
Is it working on ps4 too?

Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-9)
Post by: Djurik on 07:02 PM - 07/08/21
Try the latest V4, it is working for me till now. Guess for PS4 it will have the strongest AA, as it gives good AA for PC too.
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-9)
Post by: Sm0keyApex on 10:34 AM - 08/08/21
So Iíve used the config from the first page with st 4.2 and Xbox st which I just found out 4.2 (4 is supposed to be ps4? So that may be wrong on my understanding) and page 14 current but with ps4 st. Same dpi listed 400 and 3200 same hrz, default or common that is listed. Gotten good results, best I can find however i feel itís just not right. One is good for medium range and the other close range. I canít figure out a good all around consistency for aim assist.
With that being said is yaw and pitch more for speed or does it affect aim assist? If it does could it be elaborated on.
Also is there an updated season 10 config that I could try out?
I used to play on Xbox and switched to pc and out the xim away until just a couple of days ago and have been going hard in the firing range and in arenas testing. 1.5 Kd without xim and with it had been climbing. Just with the xim I have to change my play style immensely but I love using the wingman and r99 with xim where as without Iíd use r301 or flatline and maybe a longbow flatline 
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-9)
Post by: Djurik on 08:14 PM - 08/09/21
Ya, have updated settings, basically is same as V4, but with 3200 DPI and Maria's trick. You may find it on Discord in my signature. Recently many of us lost AA for like a week or so and now settings are under testing stage, that why not posted here yet. Will update in 1 week time. Now trying to settle my CPU 100% usage 1st, coz this probably affect AA as well.
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-9)
Post by: Djurik on 07:49 PM - 08/12/21
Unforeseen happen  ;D . Not sure how old was my Xbox controller firmware, but yesterday i updated it and also reset calibration. So now all the settings are feels different from before, most become more better. My previous settings no more works for me, need to start to create settings and test out from scratch again, in the meantime using another fellow settings from Discord.
You might want to try update your controller firmware if its too old and you might notice different results. Will post the settings once have time to test out and finetune.
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-9)
Post by: Sm0keyApex on 07:51 AM - 08/14/21
Iím pretty sure mine hasnít been updated in a while, but if I have everything working fine should I even attempt to update? Sounds like it could be a disaster lol
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-10)
Post by: Djurik on 07:35 PM - 08/15/21
if I have everything working fine should I even attempt to update

As a general rule, if it works - don't touch it  :). Mine was really no AA in any settings, and also something wrong with deadzone (even if i set DZ4 - the crosshair already started to move by itself) so i did it as a last resort. Also this controller is very old and i never updated it once, so i guessed that the firmware is also the one that comes with controller from factory.


By the way, first S10 settings is out, see the 1st post.
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-10)
Post by: Djurik on 07:33 PM - 08/20/21
Small ADS Ballistic tweak that made micro aim more smoother, shots more accurate and also increased AA for me (ADS need to increase, for me it was 16->20):
Code: [Select]
>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:AAAAdQDrgWACLQL7A8gElQViBjAG/QfKCJcJZQoyCv8LzQyaDWcONA8CD88QnBFqEjcTBBPRFJ8VbBY5FwYX1BihGW4aPBsJG9Ycox1xHj4fCx/ZIKYhcyJAIw4j2ySoJXUmQycQ:X5BC
<<< XIM APEX END COPY <<<
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-11)
Post by: Djurik on 07:38 PM - 11/15/21
Updated settings for S11.
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-11)
Post by: jd394y on 07:53 PM - 11/15/21
Season 11 XIM Settings (Current)

Season 11 Settings (V1) - Currently (as of 16.11.21) works well, Strong AA, responsive fast movements.

Discord discussion here - https://discord.gg/rZAHr9BJw7
Upd: Initially there were only my settings, but community had been grown and now there is various settings by many players as well as the XIMMR files and curves collection. Lol, big friendly community now with no stress and free talks.

Some short gameplay here:

I had used the method of not opening settings publicly and it seems to works, so continue the same (Randomized values).

!! IMPORTANT !!:For this settings to work, you need to have v4.2 ST

Windows:
Mouse - default settings
Mouse Refresh rate - 1000Hz
DPI-2500
Xim Refresh rate - 125Hz
Xim FW - Latest as of now

In Game Settings:
Video:
Playing at 1920x1080p, Locked at 143 FPS
FOV - 106

Controller:
Menu cursor speed - center bar

Now important steps in controller settings (@Maria's trick):
1. Turn on ALC
2. Set all to 0 (only Outer Treshold min is 1)
3. Turn on Per Optics and set these values:
x1 - 8.2
All rest - 10
4. Now Turn Off ALC (dont disable per optics)
Next is in Controller Settings Tab:
5. Hip sensitivity - 7
6. ADS sensitivity - 2
7. Per Optics Sentivity - Disable
8. Look Deadzone - None
9. Responce Curve - Classic
10.Movement Deadzone - Large

Settings in XIM:

Titanfall 2 ST (Xbox)
(Note: Values below i will not give exact, everyone just use your own. This way settings can live longer)

HIP:
Sens - 18-22
Synchronize - Off
Smoothing - 3-5
Y/X - 1.10
Steady Aim - 1.0
Boost - 100
SAB - 0

ADS:
Sens - 15-19
Synchronize - Off
Smoothing - 2-4
Y/X - 1.20
Steady Aim - 1.2
Boost - 0
SAB - 80-100

Enjoy!!
 
Optional.
HIP Ballistics:
Code: [Select]
>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:AAAAWACxAQkBYQG6ghICpwM7g9AEZwT9BZSGKgbvB7UIegk/CgQKyouPDHoNZA5PDzoQJREPEfoS5RPPFLoVpRaPF3oYZRlQGjobJRwQHPod5R7QH7ogpSGQInsjZSRQJTsmJScQ:X5BC
<<< XIM APEX END COPY <<<

you have a link to v4.2 ST?
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-11)
Post by: Djurik on 08:05 PM - 11/15/21
Can download here:
https://drive.google.com/file/d/1-0p7wUQjVNDoIrO0WCbs8tb3B2RD9xy8/view?usp=sharing
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-11)
Post by: jd394y on 08:09 PM - 11/15/21
Can download here:
https://drive.google.com/file/d/1-0p7wUQjVNDoIrO0WCbs8tb3B2RD9xy8/view?usp=sharing

thanks! so Im using the current on manager and xim apex. I've been out of the loop with my xim + apex legends for a while. Whats the difference to what's out now compared to v4.2 ST? I've always used Titanfall 2 to play Apex and it worked better than the apex legends one lol
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-11)
Post by: Djurik on 05:45 AM - 11/16/21
They trained it to ALC settings instead of default, so it is much more responsive in terms of movement. But the issue is for many people is that it doesnt give good AA for PC, so for console this ST should be perfect balance of movement and slightly reduced AA. For PC everyone stick to 4.2 now.
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-11)
Post by: jd394y on 09:49 AM - 11/16/21
They trained it to ALC settings instead of default, so it is much more responsive in terms of movement. But the issue is for many people is that it doesnt give good AA for PC, so for console this ST should be perfect balance of movement and slightly reduced AA. For PC everyone stick to 4.2 now.

wow good to know! PC is all i use it on as of lately, Maybe Battlefield 2042 on xbox series x once they iron out the bugs, but  APEX is always on pc.
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-11)
Post by: jd394y on 11:07 AM - 11/16/21
Alright so i THINK I did it right....

Followed the video here: https://www.youtube.com/watch?v=n067N8qf1zE

Manager Version: 5.00.20190719
Firmware Version: 5.00.20201111

Manager version matches video, but Firmware version doesn't. Will that matter? In the video, they use the PS4 config. When clicking on the Apex Legends picture and it shows what it does in the video, "ApexL-Hip-P4.2". So am i all good now? Also the video states "these steps wont effect your other XIM config's", so if i normally use Titanfall 2 for a config, do i drop that and use the PS4 version? Or make a brand new TF2 config and it'll be able to take advantage of 4.2?  Sorry for so many questions lol, trying to figure this out.
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-11)
Post by: Djurik on 07:08 PM - 11/16/21
Will that matter?
As long as its not the latest Beta then is ok, coz latest Beta firmware become different ST, not compatible with old ones. But you can update to the normal latest version, no issue. I don't remember what are the updates with their latest version.(not Beta)

When clicking on the Apex Legends picture and it shows what it does in the video, "ApexL-Hip-P4.2". So am i all good now?
Yeah, you will be using PS4 config. It's because in the video he generated PS4 Config from Manager, you can generate Xbox too, so when you click on the picture it will show X1.1. This is what I use (Xbox ST 4.2).

Also the video states "these steps wont effect your other XIM config's", so if i normally use Titanfall 2 for a config, do i drop that and use the PS4 version? Or make a brand new TF2 config and it'll be able to take advantage of 4.2?
You may treat the XIMMR you downloaded as a library with the books, so those you previously taken still with you with no changes, the new ones you take - is the new ones from that library.. lol..
In other words - what you generate now in PC manager - will be PS4 4.2 or Xbox X1.1 configs (Apex and TF2, other games not sure). So if want take advantage of it - just rename those you newly generated as 4.2, so you will know which is which easy.

My XIM for example now have

Apex:
Xbox - 4.2 (X1.1)
Xbox - 4.3 (X1.2)
PS4 - 4.2
PS4 - 4.3

TF2:
Xbox - 4.2 (X1.1)
Xbox - 4.3 (X1.2)
PS4 - 4.2
PS4 - 4.3

So I can cycle them and test whenever I need it to, or if someone shared config with that specific version - I will just paste code into it..

The season 10 in Apex was quite stable for configs, was used only one config for the whole season, it worked great. Only some minor adjustments and DPI changes, but that was not related to XIM, own PC usage without changing DPI here and there. Not sure, maybe its because I randomized the values when share configs??!! (XIM bros for sure will say its not related, hahaha)
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-11)
Post by: Djurik on 07:33 PM - 11/16/21
Hi All,
Missed out important note, those start using config pls update:
!! IMPORTANT !!:
In ADS config - set activation button to left click. Was fine-tuning the config for this approach. Pros is:
1. Your ADS is as fast as HIP, quick target switching (it is slow down when you start firing)
2. Your Hipfire senses will slow down when you start shooting
3. Wingman, PK - easy to use up close
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-11)
Post by: jd394y on 10:48 PM - 11/18/21


My XIM for example now have

Apex:
Xbox - 4.2 (X1.1)
Xbox - 4.3 (X1.2)
PS4 - 4.2


TF2:
Xbox - 4.2 (X1.1)
Xbox - 4.3 (X1.2)
PS4 - 4.2
PS4 - 4.3

No @#$%? I didnt realize any of this lol. Seeing how i normally use TF2 for APEX would you say TF2 4.2 (X1.1) is better than 4.3 (x1.2) or was the apex one only effected by they retrained around ALC?

would you happen to have the download link for
1. APEX: Xbox - 4.2 (X1.1) (<--- would like to test this against the PS4 4.2)
2. Xbox - 4.2 (X1.1) (currently using the 4.3, so if 4.2 is better i'd def want)
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-11)
Post by: Djurik on 08:02 PM - 11/21/21
Can download here:
https://drive.google.com/file/d/1-0p7wUQjVNDoIrO0WCbs8tb3B2RD9xy8/view?usp=sharing

This link I given is ST4.2 = PS(4.2) = Xbox(X1.1)   8)

It's a XIMMR configs library (database), inside there are the PS and Xbox configs altogether.
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-11)
Post by: fabioprince on 02:14 AM - 12/23/21
hi... i tried to play with my xim on pc.. but apex legends doesn t recognize anything... on xim manager everythings works... i have a beta firmware because i play with ps5 and st 4.2... latest pc xim manager.. i tried to connect an xbox controller and ps4 controller but nothing happening... can anyone help me plse??
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-11)
Post by: Djurik on 11:33 PM - 12/23/21
hi... i tried to play with my xim on pc.. but apex legends doesn t recognize anything... on xim manager everythings works... i have a beta firmware because i play with ps5 and st 4.2... latest pc xim manager.. i tried to connect an xbox controller and ps4 controller but nothing happening... can anyone help me plse??
But it works on PS5 for you? You can try to flash the latest not beta firmware to XIM and see if it works.
Some people also connect XIM wrongly to PC, they connect it in wired mode (holding the xim button while plugging in to USB). Connect normally without holding the xim button and try, xim manager is through the phone via bluetooth.
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-11)
Post by: Sonya on 05:53 PM - 12/25/21
Anyone feeling like the translator got destroyed just recently? Coincidentally, this occured right after I had to update my xim manager.
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-11)
Post by: Giantman12345 on 04:37 AM - 12/26/21
Anyone feeling like the translator got destroyed just recently? Coincidentally, this occured right after I had to update my xim manager.
I've seen someone else say this. Translator is fine, it doesn't get changed so can't change aa behaviour. On the other hand the server netcode can and they said they have been trying to improve it so they are probably testing things
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-11)
Post by: Klepta on 12:10 PM - 12/27/21
I noticed a little of this too. I literally added 2 more smoothing to my ADS (up from 1 to 3) and got right back where it felt good. Iíve also added some SAB to my ADS canít give an actual number though. Iím still playing around with it. Iíve used as low as 20% and as high as 100%. Currently on 80% and itís felt ok. With all that said I use a version of Mariaís config.
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-11)
Post by: Djurik on 08:33 PM - 12/27/21
I've seen someone else say this. Translator is fine, it doesn't get changed so can't change aa behaviour. On the other hand the server netcode can and they said they have been trying to improve it so they are probably testing things

Yeah, think they are testing stuff now, I played before yesterday and it was really bad, connection to lobby takes like 5min,  some lobbies shows 70-80ms ping, but in the match shows 500+ (no packet loss). almost every time have no connection to EA server or kicked out while connecting to match with Server Full error.  :o
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-11)
Post by: Djurik on 08:31 PM - 01/02/22
Updated Season-11 settings to Version-2. Combined the best from 2 of my older configs. Can find it on the 1st page.
Happy Hunting!!!
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-11)
Post by: Djurik on 08:11 PM - 01/24/22
Updated Season-11 settings to Version-3.
Switched back from 16k DPI to 4k, it feels better and more responsive now. AA is on point, snapping fast and easy to control within bubble.
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-11)
Post by: xiaolin888 on 02:13 AM - 02/04/22
Hello, there is no data in your latest configuration form, can you send your data?
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-11)
Post by: Djurik on 07:07 PM - 02/09/22
Oh, the copy paste? Will paste that tonight
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-12)
Post by: Djurik on 03:16 AM - 03/14/22
Settings updated for Season-12.
All settings in the 1st post in the image or use Google sheet.
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-12)
Post by: jd394y on 09:30 AM - 03/14/22
Settings updated for Season-12.
All settings in the 1st post in the image or use Google sheet.

any footage of gameplay of recent settings?
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-12)
Post by: jd394y on 09:32 AM - 03/14/22
Also, in one of your older videos where you get that cross hair from? Built into the monitor?

in this video: https://www.youtube.com/watch?v=AeuVJgkbg7s
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-12)
Post by: Djurik on 01:07 PM - 03/14/22
Hey.. Crosshair is the Reshade (https://reshade.me/ (https://reshade.me/))

Footage havent do yet, seldom play now due to a bad lags on my network now. This is today some.
https://streamable.com/321zt7 (https://streamable.com/321zt7)



Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-12)
Post by: jd394y on 02:42 PM - 03/14/22
Hey.. Crosshair is the Reshade (https://reshade.me/ (https://reshade.me/))

Footage havent do yet, seldom play now due to a bad lags on my network now. This is today some.
https://streamable.com/321zt7 (https://streamable.com/321zt7)

good @#$% dude. shredding :) Can you get banned for using that crosshair? I know I read about using 3rd party software was bannable even if its for just a cross hair. (absolutely retarded)
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-12)
Post by: jd394y on 02:44 PM - 03/14/22
Also, whats the deal with 4.1? I know 4.2 was suppose to be better with Aim assist, 4.3 is based around ALC, but i havent tried 4.1 yet? def downloading tonight to check out
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-12)
Post by: Djurik on 06:36 PM - 03/14/22
Using reshade since S5 i think. I feel that ban for this is really stupid, most of the latest monitors are comes with it built-in, so how about that..

I just tried back 4.1 and it worked better for me. 4.2 and 4.3 there is insane AA on x1 optics, but x2 and above was struggle, the side to side recoil way too strong. With 4.1 i have less AA on x1 but mid/long range optics are much more accurate now.

I might try later to have 2 exactly same configs with hotkey activation, but one is 4.1 (for mid/long ranges) and the other is 4.2 (for close quarters).. :)
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-12)
Post by: Djurik on 03:31 AM - 03/25/22
Made some highlights finally

Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-12)
Post by: jd394y on 08:48 PM - 04/23/22
Season 12 Version-1 XIM Settings (Current)

(https://i.ibb.co/Zh8fK0N/Wraith-S12-v1.png)

Discord discussion here - https://discord.gg/rZAHr9BJw7
Upd: Initially there were only my settings, but community had been grown and now there is various settings by many players as well as the XIMMR files and curves collection. Lol, big friendly community now with free talks and no stress.

!! IMPORTANT !!:
For this settings to work, you need to have v4.1 ST
XIMMR File (ST) can download here - P4.1 (X1.1) (https://drive.google.com/file/d/1E7MpXw_HElGRMZfXwSJ7wS3vNfOH5xfA/view?usp=sharing)

Copy/paste codes are here
https://docs.google.com/spreadsheets/d/1iO3VlYYWcITOyQUO49dI7CjdT76hcgQA/edit?usp=sharing&ouid=118377458730062813469&rtpof=true&sd=true
you can also try other configs starting from Season 6.

(https://i.ibb.co/kGdWCSR/unknown.png)

What does trigger deadzone: ZERO do by having it that way??
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-12)
Post by: s0N1c on 10:22 AM - 05/02/22
Season 12 Version-1 XIM Settings (Current)

(https://i.ibb.co/Zh8fK0N/Wraith-S12-v1.png)

Discord discussion here - https://discord.gg/rZAHr9BJw7
Upd: Initially there were only my settings, but community had been grown and now there is various settings by many players as well as the XIMMR files and curves collection. Lol, big friendly community now with free talks and no stress.

!! IMPORTANT !!:
For this settings to work, you need to have v4.1 ST
XIMMR File (ST) can download here - P4.1 (X1.1) (https://drive.google.com/file/d/1E7MpXw_HElGRMZfXwSJ7wS3vNfOH5xfA/view?usp=sharing)

Copy/paste codes are here
https://docs.google.com/spreadsheets/d/1iO3VlYYWcITOyQUO49dI7CjdT76hcgQA/edit?usp=sharing&ouid=118377458730062813469&rtpof=true&sd=true
you can also try other configs starting from Season 6.

(https://i.ibb.co/kGdWCSR/unknown.png)


Can i use this confgs or only cuves on console ??
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-12)
Post by: Djurik on 08:01 PM - 05/04/22
Can i use this confgs or only cuves on console ??

Can use both.. Either the whole config, or the curves individually, they are adjusted to make linear configs more stable and not so shaky. If config work good without curves - can remove them. ADS can keep, I made it to slow down a bit in panic shots if the hand move too fast.
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-12)
Post by: iTz TiMe2BLaZe on 11:51 AM - 05/18/22
Do you play on PC with these brotha?
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-12)
Post by: Djurik on 08:29 PM - 05/18/22
Yep, on PC
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-12)
Post by: alemetal91 on 04:23 AM - 05/24/22
Someone can link 4.2 st ? I can't find it anywhere!
Title: Re: Apex Legends XIM setting for PC (closest feel) (Season-12)
Post by: Djurik on 06:31 PM - 05/24/22
Just go discord in my signature, we have all files there, 4.1, 4.2, 4.3 (In XIM-files-and-curves)