XIM Community
General Category => Game Support => Topic started by: Tavenkilledyou on 09:59 PM - 10/22/19
-
The new st feel weird to me it feels almost too slow to use idk if I’m doing something wrong but I’ll be using the old st and praying I’ll never accidentally delete it bc I’ll never get it again
-
We should get instructions soon from the team what in-game settings to use with it for better results
-
I'm pretty sure the in game settings on http://xim.tech/settings are correct, but mist4fun will have to comment tomorrow.
-
After a few minor tweaks I’m starting to like it I about doubled my hip and ads and seem to be feeling better... ar shots and sniping feel much better but building overall feels slower and a little sticky
-
Yeah the new settings are posted with warning about aim mechanics being bad.
I wonder if this ST is meant to outperform the old? Or if it’s just a new ST with advanced settings.
I haven’t had a chance to try the new one.
-
mist4fun said performance should be better than it has been in awhile since it's now possible to turn down temporal acceleration. He will comment tomorrow.
-
It feels like butter, great job Mist
-
Definitely have to change some things up with my building sens but sniping feels better than ever the aim assist doesn’t pull as much
-
Does turning boost ramp time matter of boost is set to 0%
-
Where do we download the fortnite update? Not seeing it anywhere on the forums? I'm kind of a noob when it comes to updating my XIM Apex.
-
It’s not a XIM update its a st (smart translator) update all’s you have to do is click the download arrow underneath the three dots of your xim apex manger and hit download and if for whatever reason it’s not showing up for you you can go under global settings and hit force games download... also config recreation is required so you must create a new one and delete the old one
-
Yeah I also noticed the only thing missing in settings update is turning boost ramp time for look and ADS sens
Should we turn this to 1 second in order to try minimizing this boost?
-
Does turning boost ramp time matter of boost is set to 0%
Yeah I also noticed the only thing missing in settings update is turning boost ramp time for look and ADS sens
Should we turn this to 1 second in order to try minimizing this boost?
The “Turning boost ramp time” is how long it takes for the horizontal and vertical boost values to kick in. Since those are at 0 (no boost), then the ramp time setting doesn’t do anything.
-
With the new St out what setting(full) are you all using right now?(ie default, sync, hip ads numbers etc etc)
-
Any advice on the ads horizontal / vertical settings when having Xim ads disabled and using in game ads sensitivity instead.
Apparently to have x and y ads the same on the new settings, vertical should be higher than horizontal. That’s why when you copy from legacy it sets the values different. Eg. legacy value of .5 ads will set as 53% horizontal and 65% vertical when using copy from legacy. Is that behaviour the same when using Xim, or does it somehow change when running through the ST hip profile.
Basically want to know if to have x and y even for ads, would 53% / 65% ads be correct (like it would be when using a controller), or should it be 53% / 53%.
-
Does turning boost ramp time matter of boost is set to 0%
Yeah I also noticed the only thing missing in settings update is turning boost ramp time for look and ADS sens
Should we turn this to 1 second in order to try minimizing this boost?
The “Turning boost ramp time” is how long it takes for the horizontal and vertical boost values to kick in. Since those are at 0 (no boost), then the ramp time setting doesn’t do anything.
*edit*
I see what you’re saying now. It will not enable boost because the boosts are disabled
-
Any advice on the ads horizontal / vertical settings when having Xim ads disabled and using in game ads sensitivity instead.
My advice, dont do that ;).
Your xim fortnite config is then no longer optimized for your ingame settings and you usually suffer in ads mode from things like
- aim acceleration
- inconsistent aim assist
- stutter or skipping
there are better waits to overcome the ads slowdown while building stairs :).
-
Any advice on the ads horizontal / vertical settings when having Xim ads disabled and using in game ads sensitivity instead.
My advice, dont do that ;).
Your xim fortnite config is then no longer optimized for your ingame settings and you usually suffer in ads mode from things like
- aim acceleration
- inconsistent aim assist
- stutter or skipping
there are better waits to overcome the ads slowdown while building stairs :).
Thanks for that. Will have a browse around the forum for one of those better solutions. Does having the in game build and edit values higher effect anything badly?
-
Any advice on the ads horizontal / vertical settings when having Xim ads disabled and using in game ads sensitivity instead.
My advice, dont do that ;).
Your xim fortnite config is then no longer optimized for your ingame settings and you usually suffer in ads mode from things like
- aim acceleration
- inconsistent aim assist
- stutter or skipping
there are better waits to overcome the ads slowdown while building stairs :).
I found this post from Mist. It’s from back in January though, so I’m not sure if it would be different or not with the new aim mechanic changes.
Hip and ADS use the same ST in Fortnite so there is no need to worry about keeping the ADS page enabled. The above is true for games that use different look mechanics and STs between views.
-
True but even if that still applies to the new aiming mechanic, by not using 100% ingame ADS sensitivity your HIP=ADS translator will no longer be perfectly optimized.
As soon as you go from 100% to 99% you can already face problems, the more you reduce the sensitivity the bigger the aiming problems can become.
-
- Controller Sensitivity Page -
Use Advanced Options: On
Advanced - Look Sensitivity:
Look Horizontal Speed: 100%
Look Vertical Speed: 100%
Turning Horizontal Boost: 0%
Turning Vertical Boost: 0%
Turning Boost Ramp Time ??? should this be 0.00Seconds or left as default??
Advanced - ADS Sensitivity:
Look Horizontal Speed: 100%
Look Vertical Speed: 100%
Turning Horizontal Boost: 0%
Turning Vertical Boost: 0%
Turning Boost Ramp Time ??? should this be 0.00Seconds or left as default??
Advanced - Sensitivity:
Look Dampening Time: 0
Look Input Curve: Exponential
Use Legacy Controls: Off
- Controller Page -
Button Layout: Combat ProThis needs changing to Builder Pro
Right Analog Stick Deadzone: Default (Xbox: .20, PS4 .12)
Everything in red needs answering. @Mist @OBSIV
-
Any idea why my ramps are slowing down?! Wasn’t like this be fire for ages....
Thanks for help.
I love new st...
Everything is so smooth. Just ramps slowing down.... did everything like says in the settings. Created new config. Any one got the same problem ?
-
Any idea why my ramps are slowing down?! Wasn’t like this be fire for ages....
Thanks for help.
I love new st...
Everything is so smooth. Just ramps slowing down.... did everything like says in the settings. Created new config. Any one got the same problem ?
I use a button on the side on my mouse for ramps so I don't get the ADS slowdown. It was a pain in the arse to get use to but after a day or two your muscle memory will adjust :)
-
Any idea why my ramps are slowing down?! Wasn’t like this be fire for ages....
Thanks for help.
I love new st...
Everything is so smooth. Just ramps slowing down.... did everything like says in the settings. Created new config. Any one got the same problem ?
I use a button on the side on my mouse for ramps so I don't get the ADS slowdown. It was a pain in the arse to get use to but after a day or two your muscle memory will adjust :)
Didn’t have this bro lemme before this ST...is it only in this ST?
-
Yeah it's different now because we are using the new settings. The ST is completely fine you just need to use a different key for ramps and tweak your "XIM ADS" for weapons.
-
Yeah it's different now because we are using the new settings. The ST is completely fine you just need to use a different key for ramps and tweak your "XIM ADS" for weapons.
Oh I see I have to find another bind now :)
Thanks mate!
-
Best ST yet
-
What you all using for ramp?
-
Here's a thought, not sure if it will work:
Assign ramp to another button in game settings (right dpad or something)
Make Aux config toggled by build button
Set Right click (normally ADS) to right dpad (or whatever) in aux.
Would this work?
-
So you can’t use Legacy settings on this config right?
-
Mhhm New St feels very Bad if i switch to old St IT feels much better. I use the correct settings and 3200dpi 1000hz sync off anybody have same Problems??
-
Mhhm New St feels very Bad if i switch to old St IT feels much better. I use the correct settings and 3200dpi 1000hz sync off anybody have same Problems??
Initial playtime with new ST (with updated in game settings) and I tend to agree. The previous ST "feels" better. New ST feels floaty. Glad I didn't delete the old ST. ;)
-
Mhhm New St feels very Bad if i switch to old St IT feels much better. I use the correct settings and 3200dpi 1000hz sync off anybody have same Problems??
Initial playtime with new ST (with updated in game settings) and I tend to agree. The previous ST "feels" better. New ST feels floaty. Glad I didn't delete the old ST. ;)
Don’t know what you taking about guys. Feels amazing. You didn’t play enough with new one, almost two weeks in old one you played of course it feels different. Give a time. My ar shots is on point. Flicks are easy :) you sing off sync for hip and common for ads.
-
Mhhm New St feels very Bad if i switch to old St IT feels much better. I use the correct settings and 3200dpi 1000hz sync off anybody have same Problems??
Initial playtime with new ST (with updated in game settings) and I tend to agree. The previous ST "feels" better. New ST feels floaty. Glad I didn't delete the old ST. ;)
Don’t know what you taking about guys. Feels amazing. You didn’t play enough with new one, almost two weeks in old one you played of course it feels different. Give a time. My ar shots is on point. Flicks are easy :) you sing off sync for hip and common for ads.
You made a typo in the last sentence so I m not sure what you mean, what sync are you using for HIP and ADS? Do you use Hip translator on ADS? And finally, DPI and polling?
-
Mhhm New St feels very Bad if i switch to old St IT feels much better. I use the correct settings and 3200dpi 1000hz sync off anybody have same Problems??
Initial playtime with new ST (with updated in game settings) and I tend to agree. The previous ST "feels" better. New ST feels floaty. Glad I didn't delete the old ST. ;)
Don’t know what you taking about guys. Feels amazing. You didn’t play enough with new one, almost two weeks in old one you played of course it feels different. Give a time. My ar shots is on point. Flicks are easy :) you sing off sync for hip and common for ads.
You made a typo in the last sentence so I m not sure what you mean, what sync are you using for HIP and ADS? Do you use Hip translator on ADS? And finally, DPI and polling?
he said:
off sync for hip and common for ads
Hip SYNC OFF
ADS SYNC COMMON
-
I make a complete New cfg without paste and same Problem... The St feels floaty if i switch to old one the reaction is much better. With old St hip 130 and With New St 200 and very Bad feeling.
-
- Controller Sensitivity Page -
Use Advanced Options: On
Advanced - Look Sensitivity:
Look Horizontal Speed: 100%
Look Vertical Speed: 100%
Turning Horizontal Boost: 0%
Turning Vertical Boost: 0%
Turning Boost Ramp Time ??? should this be 0.00Seconds or left as default??
Advanced - ADS Sensitivity:
Look Horizontal Speed: 100%
Look Vertical Speed: 100%
Turning Horizontal Boost: 0%
Turning Vertical Boost: 0%
Turning Boost Ramp Time ??? should this be 0.00Seconds or left as default??
Advanced - Sensitivity:
Look Dampening Time: 0
Look Input Curve: Exponential
Use Legacy Controls: Off
- Controller Page -
Button Layout: Combat ProThis needs changing to Builder Pro
Right Analog Stick Deadzone: Default (Xbox: .20, PS4 .12)
Everything in red needs answering. @Mist @OBSIV
Boost Ramp Time isn't included because it's not used when using the settings listed. Ramp Time is disabled with Boost set to 0% so you can have Ramp Time set to anything because it isn't used.
We had supported Builder Pro in earlier versions I believe but the community requested Combat Pro so it was changed. There would need to be a large demand to switch back.
-
- Controller Sensitivity Page -
Use Advanced Options: On
Advanced - Look Sensitivity:
Look Horizontal Speed: 100%
Look Vertical Speed: 100%
Turning Horizontal Boost: 0%
Turning Vertical Boost: 0%
Turning Boost Ramp Time ??? should this be 0.00Seconds or left as default??
Advanced - ADS Sensitivity:
Look Horizontal Speed: 100%
Look Vertical Speed: 100%
Turning Horizontal Boost: 0%
Turning Vertical Boost: 0%
Turning Boost Ramp Time ??? should this be 0.00Seconds or left as default??
Advanced - Sensitivity:
Look Dampening Time: 0
Look Input Curve: Exponential
Use Legacy Controls: Off
- Controller Page -
Button Layout: Combat ProThis needs changing to Builder Pro
Right Analog Stick Deadzone: Default (Xbox: .20, PS4 .12)
Everything in red needs answering. @Mist @OBSIV
Boost Ramp Time isn't included because it's not used when using the settings listed. Ramp Time is disabled with Boost set to 0% so you can have Ramp Time set to anything because it isn't used.
We had supported Builder Pro in earlier versions I believe but the community requested Combat Pro so it was changed. There would need to be a large demand to switch back.
Hey Mist! Could you answer one last thing, what Sync should we be using on HIP and ADS to get the most out of your ST?
And noob question, why does it matter if you trained with combat pro or builder pro? Can’t understand why that would be important
-
New update feels a lot smoother than old ST, thanks for all your work. I may be wrong on this but I'm pretty sure no one is using combat pro anymore and everyone is using either builder pro or custom. Idk if that makes a difference for the ST but combat pro is just inferior in fortnite right now. I am curious if there are any thoughts on building and edit sens. I have mine on 1.8 and 2.0. If feels fine but is there any reason that I should change it for new ST.
-
- Controller Sensitivity Page -
Use Advanced Options: On
Advanced - Look Sensitivity:
Look Horizontal Speed: 100%
Look Vertical Speed: 100%
Turning Horizontal Boost: 0%
Turning Vertical Boost: 0%
Turning Boost Ramp Time ??? should this be 0.00Seconds or left as default??
Advanced - ADS Sensitivity:
Look Horizontal Speed: 100%
Look Vertical Speed: 100%
Turning Horizontal Boost: 0%
Turning Vertical Boost: 0%
Turning Boost Ramp Time ??? should this be 0.00Seconds or left as default??
Advanced - Sensitivity:
Look Dampening Time: 0
Look Input Curve: Exponential
Use Legacy Controls: Off
- Controller Page -
Button Layout: Combat ProThis needs changing to Builder Pro
Right Analog Stick Deadzone: Default (Xbox: .20, PS4 .12)
Everything in red needs answering. @Mist @OBSIV
Boost Ramp Time isn't included because it's not used when using the settings listed. Ramp Time is disabled with Boost set to 0% so you can have Ramp Time set to anything because it isn't used.
We had supported Builder Pro in earlier versions I believe but the community requested Combat Pro so it was changed. There would need to be a large demand to switch back.
I used Builder PRO since day 1 ...not sure WHO recommended Combat PRO...this is by far inferior to Builder PRO
could we get a vote and have it changed please?
If people think Combat PRO is better, they should definitely change to Builder PRO and try it. THat is night and day difference in game.
-
- Controller Sensitivity Page -
Use Advanced Options: On
Advanced - Look Sensitivity:
Look Horizontal Speed: 100%
Look Vertical Speed: 100%
Turning Horizontal Boost: 0%
Turning Vertical Boost: 0%
Turning Boost Ramp Time ??? should this be 0.00Seconds or left as default??
Advanced - ADS Sensitivity:
Look Horizontal Speed: 100%
Look Vertical Speed: 100%
Turning Horizontal Boost: 0%
Turning Vertical Boost: 0%
Turning Boost Ramp Time ??? should this be 0.00Seconds or left as default??
Advanced - Sensitivity:
Look Dampening Time: 0
Look Input Curve: Exponential
Use Legacy Controls: Off
- Controller Page -
Button Layout: Combat ProThis needs changing to Builder Pro
Right Analog Stick Deadzone: Default (Xbox: .20, PS4 .12)
Everything in red needs answering. @Mist @OBSIV
Boost Ramp Time isn't included because it's not used when using the settings listed. Ramp Time is disabled with Boost set to 0% so you can have Ramp Time set to anything because it isn't used.
We had supported Builder Pro in earlier versions I believe but the community requested Combat Pro so it was changed. There would need to be a large demand to switch back.
Would it hurt to use Legacy 🥶
-
Yeah not to be difficult but nobody uses Combat. Builder pro is standard.
-
I don't think anything would be different between combat and builder. Think Mist is mistaking the 2 arround. I think we went from something like quick builder to combat pro to builder pro. Nobody using combat pro after builder pro came out anymore.
Aiming shouldn't change, only bindings I assume
-
Would it hurt to use Legacy 🥶
. Yes Legacy isn't trained with the new ST, Use the new recommend settings then adjust XIM settings to what you prefer also there will be a slowdown on your ramps cause we cant use just a HIP profile anymore as the Ingame HIP/ADS now use a separate look mechanic. If you want to avoid the slowdown you will now either have to use a new button for ramps. I use sniper button on the Logitech G502 or use the previous ST with Legacy settings.
-
I don't think anything would be different between combat and builder. Think Mist is mistaking the 2 arround. I think we went from something like quick builder to combat pro to builder pro. Nobody using combat pro after builder pro came out anymore.
Aiming shouldn't change, only bindings I assume
. Your right this wont affect anything, I was just pointing out that it says "Combat Pro" in the recommended settings. Builder Pro is 100% the one to choose.
-
I do agree the new ST feels wayyyyy better than the old.
Boost Ramp Time isn't included because it's not used when using the settings listed. Ramp Time is disabled with Boost set to 0% so you can have Ramp Time set to anything because it isn't used.
We had supported Builder Pro in earlier versions I believe but the community requested Combat Pro so it was changed. There would need to be a large demand to switch back.
Not sure if you’re confused but I have not seen a single person on this forum or anywhere that uses combat pro. Would this make a difference on the STs? I don’t see how it would but if it does I think a builder pro ST is definitely needed.....
-
Ok no judgement here ok.. I’m new to this stuff. Is this new s/t supposed to remove the aim assist that it would give me because it thinks I am a controller? Or is it supposed to stack the aim assist on top of my mouse and keyboard movement? Or is the new s/t supposed to negate the aim assist bubble because most people prefer to override aim assist? I sort of like the snappiness of AA personally. I honestly just need a little guidance. I’m running 250hz polling too because I was told it would make the AA more snappy. Also have it at 4000dpi. I’m probably all over the place here because I took too much random advice. This post is also probably annoying because I sound like an idiot - but again I’m new. I am using a G502. Could I get a little guidance?
-
Will xim4 get the ow and fn update?
-
Questions:
Is the new ST trained on linear ?
Is the foot controller option also trained for the ST?
-
Questions:
Is the new ST trained on linear ?
Is the foot controller option also trained for the ST?
No and no
-
So guys, which synchronisation u using with the new St?
-
New st low-key sucks 😭 the aim assist is still way to strong I don’t feel like am playing with a mouse anymore feels like am playing on controller . The movements feel weird but everything else is okay .
-
Did you try aim assist strength in-game settings?
-
loving the new st... my aim is on point and doesnt feel all floaty as before
-
What DPI and Sync settings u all using ? Because the aim assist feels way to strong?
-
No dpi or sync is gonna cut through that aim assist u better either lower the aim assist strength or up ur ads sensitivity a bit to cut through it
-
What DPI and Sync settings u all using ? Because the aim assist feels way to strong?
12k dpi
Sync default
-
with new ST everything feels amazing, smooth, and with new aim assist it feels like pc its not so sticky like was on old settings.
I am using 4k DPI 500hz
HIP Sync OFF 19
ADS Sync COMMON 3.5
settings in game standard
then jump in here for a 30-60 min adjust your sens HIP and ADS as needed, get your muscle memory and you are done.:)
https://www.youtube.com/watch?v=vRxfAGq-TR0.
-
with new ST everything feels amazing, smooth, and with new aim assist it feels like pc its not so sticky like was on old settings.
I am using 4k DPI 500hz
HIP Sync OFF 19
ADS Sync COMMON 3.5
settings in game standard
then jump in here for a 30-60 min adjust your sens HIP and ADS as needed, get your muscle memory and you are done.:)
https://www.youtube.com/watch?v=vRxfAGq-TR0.
I tried sync off on HIP, but it was strange, sometimes the aim would “stutter”, don’t know how to explain..any particular reason you are using Sync off? Common on both Hip and ADS feels better to me
-
Would it hurt to use Legacy 🥶
. Yes Legacy isn't trained with the new ST, Use the new recommend settings then adjust XIM settings to what you prefer also there will be a slowdown on your ramps cause we cant use just a HIP profile anymore as the Ingame HIP/ADS now use a separate look mechanic. If you want to avoid the slowdown you will now either have to use a new button for ramps. I use sniper button on the Logitech G502 or use the previous ST with Legacy settings.
Then what is the sense if I have to retrain my mind to use a different button for ramps? I have everything just the way I like it. Might just go native KB/M.
-
with new ST everything feels amazing, smooth, and with new aim assist it feels like pc its not so sticky like was on old settings.
I am using 4k DPI 500hz
HIP Sync OFF 19
ADS Sync COMMON 3.5
settings in game standard
then jump in here for a 30-60 min adjust your sens HIP and ADS as needed, get your muscle memory and you are done.:)
https://www.youtube.com/watch?v=vRxfAGq-TR0.
I tried sync off on HIP, but it was strange, sometimes the aim would “stutter”, don’t know how to explain..any particular reason you are using Sync off? Common on both Hip and ADS feels better to me
if I am using common or default and I am in a build/shotgun fight when enemy near my, it slowing my movement down because of AA(diodnt try yet to lower AA) and its difficult to hit the shot when i need it, with sync off totally different story, I dont have this problem. It feels more like PC, AA not sticky.
-
If you think of playing competitive good luck because this ST sucks. No matter what you do just doesn’t feel good . Maybe training the ST on legacy is a way better option . Using advanced is horrible horrible horrible .
-
If you think of playing competitive good luck because this ST sucks. No matter what you do just doesn’t feel good . Maybe training the ST on legacy is a way better option . Using advanced is horrible horrible horrible .
Use legacy look controls on that is what I been using I went on a 17 win streak the other day with it
-
I would like to know why the new ST was not done using the Linear setting. I'm sure there is a good one but just curious.
-
i'm just wondering what settings / sensitivities you guys use ..
feel like i haven't found a good setting & would love to try out a new one & change it from there
using 9.75 hip 9 ads common with 4kdpi
got a large mousepad
-
If you are struggling to cut through aim assist here
https://community.xim.tech/index.php?topic=82359.0
-
I have zero aim assist with the new settings. Even at 100.
-
I have zero aim assist with the new settings. Even at 100.
thats super odd they are strong
-
I have zero aim assist with the new settings. Even at 100.
thats super odd they are strong
Tomorrow I'll see if I can do a vid.
-
I have zero aim assist with the new settings. Even at 100.
thats super odd they are strong
Tomorrow I'll see if I can do a vid.
Something has to be wrong with ur settings in game or xim
-
I have zero aim assist with the new settings. Even at 100.
thats super odd they are strong
Tomorrow I'll see if I can do a vid.
Something has to be wrong with ur settings in game or xim
No, there is nothing wrong with it. If you enable advanced options and go to the bottoms and use Legacy Controls, it will grey out advanced and you can use the legacy menu. With Legacy Aim Assist, it will do the old Snap to the player with ADS spam.
If you use the Advanced Settings, AIM assist was changed. There is NO snapping to player anymore. Epic changed it so it will track better when shooting targets. Watch Youtube videos about the difference between the 2
Basically, Legacy is good for those that like snap aim assist. That is good for close range fights and mid range.
Advanced setting aim assist is no longer good for close range and more of a Mid-Long Range fighting and tracking.
The problem is, the new ST is designed to be used with the advanced settings. I personally wouldve preferred the option to select Legacy or New because i prefer Legacy but with the new ST and me updating my advanced settings to the XIM recommended, i am still getting 5-9 kills games
-
If http://xim.tech/settings isn't clear on how to configure the game, please let us know.
-
I have zero aim assist with the new settings. Even at 100.
thats super odd they are strong
Tomorrow I'll see if I can do a vid.
Something has to be wrong with ur settings in game or xim
No, there is nothing wrong with it. If you enable advanced options and go to the bottoms and use Legacy Controls, it will grey out advanced and you can use the legacy menu. With Legacy Aim Assist, it will do the old Snap to the player with ADS spam.
If you use the Advanced Settings, AIM assist was changed. There is NO snapping to player anymore. Epic changed it so it will track better when shooting targets. Watch Youtube videos about the difference between the 2
Basically, Legacy is good for those that like snap aim assist. That is good for close range fights and mid range.
Advanced setting aim assist is no longer good for close range and more of a Mid-Long Range fighting and tracking.
The problem is, the new ST is designed to be used with the advanced settings. I personally wouldve preferred the option to select Legacy or New because i prefer Legacy but with the new ST and me updating my advanced settings to the XIM recommended, i am still getting 5-9 kills games
Ya new settings to get them good u gotta play around with settings alot i like legacy better. But i know u can use the legacy settings with new st if u have to i know bado is. Just have to adjust sensitivity accordingly....an both st are based on exponential
-
I have zero aim assist with the new settings. Even at 100.
This will give you a very strong aim assist
1000 DPI
250HZ
HIP 40 Common Sync with 3 smoothing
ADS 28 Common Sync with 6 smoothing
No SAB
IMPORTANT
in game settings
LEGACY LOOK CONTROLS ON
Remember to turn on the aim assist in the game settings!
-
If you think of playing competitive good luck because this ST sucks. No matter what you do just doesn’t feel good . Maybe training the ST on legacy is a way better option . Using advanced is horrible horrible horrible .
Advanced is working great for me right now. And as for competitive goes I'm currently Division 7 I don't seem to be having any issues.
-
I think after today's update 10.40 aim feels weird, idk maybe it's only me :-\
-
Good evening,
I also have tried the new ST for XIM and I can say that it is working only on legacy settings - on.
On previous ST and new ST the advanced settings are unplayable. For example - if I ADS in the distance and slowly move the cursor horizontal, it moves like shaky waves. It is very hard to aim.
If I turn the legacy settings on - the cursor is very precise and is not waving or shaking. To be honest, I see no difference in previous and new ST. Maybe on new ST the aim is a little bit more precise, but only on legacy settings on.
This is my experience.
-
Can someone please explain to me why it was trained on expo and not linear???? Linear is literally perfect for mouse and key, why interpolate with expo. Ugh.
-
Does anyone know how do I downgrade to previous software?
I can now say, the aim is very bad. It is very hard to aim precisely. When I ADS in a far distance, the cursor moves in a zigzag motion..
-
I'm really confused why everyone is having such an issue with this ST it literally feels better than it ever has. Maybe I just have the right settings at 16000 DPI and 10.0 sens. I even went back to the old ST and tried it with legacy settings and its night and day between the new ST. Aim Assist is great not to strong and tracking is almost perfect. Maybe a higher DPI is the answer for those who are having issues.
-
I'm really confused why everyone is having such an issue with this ST it literally feels better than it ever has. Maybe I just have the right settings at 16000 DPI and 10.0 sens. I even went back to the old ST and tried it with legacy settings and its night and day between the new ST. Aim Assist is great not to strong and tracking is almost perfect. Maybe a higher DPI is the answer for those who are having issues.
Hello.
Yes I am also confused why I am having problem with the new software. I am wondering what might be the problem.
As I already mentioned earlier, when I ADS far in the distance, and very slowly move the cursor, I can see that it is moving in a zigzag motion. If there wouldnt be the aim assist, it would be impossible to hit a shot in a far distance :(
-
Personally really liking the new ST. I've been hitting crazy shotgun flicks and absolutely melting people with AR.
in case anyone is interested I've found that Default sync, 1000hz, 12K DPI to be my favorite so far. Very vanilla I know but man it feels great with the advanced settings.
-
I'm really confused why everyone is having such an issue with this ST it literally feels better than it ever has. Maybe I just have the right settings at 16000 DPI and 10.0 sens. I even went back to the old ST and tried it with legacy settings and its night and day between the new ST. Aim Assist is great not to strong and tracking is almost perfect. Maybe a higher DPI is the answer for those who are having issues.
Hello.
Yes I am also confused why I am having problem with the new software. I am wondering what might be the problem.
As I already mentioned earlier, when I ADS far in the distance, and very slowly move the cursor, I can see that it is moving in a zigzag motion. If there wouldnt be the aim assist, it would be impossible to hit a shot in a far distance :(
That was my experience with the old ST while using advanced settings but once I uploaded new ST it got a whole lot smoother. So make sure you have the right ST and configure a new profile not just copy and paste. Other than that I don't know what settings, DPI, or sens you use so I'm not sure what the problem is.
-
Dpi shouldnt affect ain assist in my opinion...hertz an sync will...idk how people use default i get orange hit markers so much with default. Not to mention its for 120fps fortnite is 60fps so ur basically using something not in sync with game to me means some errors or inconsistencies could happen. New st i like cause doesnt seem like as much acceleration as old one but im still using old st with legacy so i can beam people far away. New aim assist = no auto rotate to character and aim assist actually doesnt even work as far away as legacy and another con no edit mode aim assist if you use it
-
Im assuming it was to hard for the devs to make the st for linear but that woulda an shoulda been the way to go for most mouse like movement. Exponential is more controller like with delay an acceleration. Linear is more instant an no acceleration idk why they did it on exponential im assuming to difficult or maybe not possible not sure
-
Im assuming it was to hard for the devs to make the st for linear but that woulda an shoulda been the way to go for most mouse like movement. Exponential is more controller like with delay an acceleration. Linear is more instant an no acceleration idk why they did it on exponential im assuming to difficult or maybe not possible not sure
because for the smart trainer it doesnt make any difference if an aim mechanic is exponential or linear. the smart trainer will level the mechanic to a linear behavior anyway. what matters though are all the other aspects that the aim mechanic has, especially the flaws. and in that regard the exponential one seems to have less flaws which overall results in better mouse movements. thats why mist picked it over the other mechanic.
just because an aim mechanic sounds better on first sight doesnt mean it actually is :).
-
How do you increase scope sensitivity with new ST?
-
because for the smart trainer it doesnt make any difference if an aim mechanic is exponential or linear. the smart trainer will level the mechanic to a linear behavior anyway. what matters though are all the other aspects that the aim mechanic has, especially the flaws. and in that regard the exponential one seems to have less flaws which overall results in better mouse movements. thats why mist picked it over the other mechanic.
just because an aim mechanic sounds better on first sight doesnt mean it actually is :).
So basically we have to use exponential which has acceleration?. That doesn't make that much sense to me when linear doesn't have acceleration. Pretty sure the "temporal acceleration" was the main issue with Fortnite so why still use exponential? Any chance @Mist could chime in as to why this is since he is the only one that makes the ST's? Also the Aim assist on the new settings are straight trash. Would of been nice to have a ST for Legacy for those who want the old Aim Assist to.
-
No,new aim assist is good.It is very easy to aim with shotgun.OP.
-
What is your settings?
-
I just find the new aim assist way to strong . I know my friends on PC find it okay . But on console it’s to strong for me specially when it comes to close range fights makes it very difficult to track players .
-
I just find the new aim assist way to strong . I know my friends on PC find it okay . But on console it’s to strong for me specially when it comes to close range fights makes it very difficult to track players .
No doubt. ADS at close range will just get you killed. The slow down is so strong mouse tracking can't keep up with the player. Hip fire at close range. It's a difficult habit to quit.