XIM Community
XIM APEX => Downloads => Beta => Topic started by: OBsIV on 07:53 PM - 12/09/18
-
IMPORTANT: This Beta requires you upgrade both firmware and Manager in order to access the new features. Please use the links below.
This is a BETA firmware build that, based on community request, brings in the Boost setting and Steady Aim experimental test feature from XIM4. It also includes a new feature for keyboard users: Simulate Analog Behavior. These are advanced features that should be used with caution as they can negatively affect aiming performance if not used correctly. This build also includes a new subconfig Deactivation Delay feature for games that require it.
● Steady Aim: Unlike Smoothing which produces uniform mouse stabilization, Steady Aim forcibly restricts mouse movement into discrete values. Higher values produce a stronger effect. Located under Aim expert settings.
● Boost: Boost artificially inflates the game's aiming stick dead zone. Be advised that values too large will significantly degrade micro-aiming performance. Located under Mouse expert settings.
● Simulate Analog Behavior: For keyboard users, outputs controller values similar to that of the gamer using a thumbstick. Higher values produce a stronger effect. Located under Movement expert settings.
● Deactivation Delay: Similar to a subconfig's (such as ADS) Activation delay, a Deactivation delay waits for the specified time before it's longer active. Located under each subconfig's Activation settings.
● Deactivation Priority: Prior to this change, when a subconfig is no longer active, return to Hip settings occurs. Now, if there is a subconfig between the active and Hip that is currently activated, it is selected (rather than Hip).
XIM APEX Firmware
Download XIM APEX Firmware Tool 20181204 for PC (http://cloud.xim.tech/Beta/XIMAPEXFlash-20181204-PC.exe)
Windows 7/8/8.1/10 x86/x64
Download XIM APEX Firmware Tool 20181204 for Mac (http://cloud.xim.tech/Beta/XIMAPEXFlash-20181204-Mac.zip)
macOS 10.11 or higher
Flash Upgrade Instructions (instructional video (https://youtu.be/fYlwNXl-ZGw)):
1. Hold down the button on your XIM APEX
2. Plug your XIM APEX into your computer while continuing to hold the button
3. Wait for your XIM APEX's light to display blue and then release the button
4. Download and run the XIMAPEXFlash tool
5. Select Update Firmware
6. Disconnect your XIM APEX from your computer after the tool completes
XIM APEX Manager
Download XIM APEX Manager 20181204 for iOS (https://testflight.apple.com/join/1IAp7e3i) (← Join our TestFlight by clicking the link from your iOS device)
iOS 8 or higher
Download XIM APEX Manager 20181204 for Android (http://cloud.xim.tech/Beta/XIMAPEXManager-20181204-Android.apk) (Direct APK download)
Android 4.4 or higher
Download XIM APEX Manager 20181204 for PC (http://cloud.xim.tech/Beta/XIMAPEXManager-20181204-PC.exe)
Windows 10/8.1/8 x86/x64
-
Hi, I have already a firmware test version 20181204 and it is different from this one so I can't update to this one.
How could I solve this issue?
-
Hi, I have already a firmware test version 20181204 and it is different from this one so I can't update to this one.
How could I solve this issue?
Backup your configs, due a factory reset and then restore your configs.
-
Correct, for those few that are in this situation will need to do as RML describes.
-
Hi, I have already a firmware test version 20181204 and it is different from this one so I can't update to this one.
How could I solve this issue?
Backup your configs, due a factory reset and then restore your configs.
Dove :-)
Thank you very much :-)
-
Says the new version was released today (in TestFlight) but I was having issues pasting a new config. Anyone know if it was actually released by Apple or if they are just being their normal selves and we still have a wait?
All good, got a message from TestFlight saying it dropped and was able to set up the new config. On a sidenote, interesting how you have to cut and paste rather than copy and paste on iOS for copying configs, could just be me though. Thanks for the new firmware/manager!
-
What game needs deactivation delay and why?
-
Can’t download new manager for iOS
-
Can’t download new manager for iOS
I got a notification to update and it updated just fine.
-
What game needs deactivation delay and why?
RDR2 needs it, its the first game that has a delay when you switch the aiming modes
for more infos: https://community.xim.tech/index.php?topic=72824.0;topicseen
-
Could you guys add the copy - paste functionality to it? It is really poor experience to have to either back up configs or do it manually again.
Backup configs is not working well on the last beta version as it seems my character ( in fortnite) drifts to the right using the same config previously setup.
Please?
-
Could you guys add the copy - paste functionality to it? It is really poor experience to have to either back up configs or do it manually again.
Backup configs is not working well on the last beta version as it seems my character ( in fortnite) drifts to the right using the same config previously setup.
Please?
Its a beta....
-
Could you guys add the copy - paste functionality to it? It is really poor experience to have to either back up configs or do it manually again.
Backup configs is not working well on the last beta version as it seems my character ( in fortnite) drifts to the right using the same config previously setup.
Please?
Huh? Copy/Paste settings have always been there, and still are...
-
Question, is it normal if my xim flash’s green then gold when I right click my mouse which is ADS or left trigger on the controller?
-
Welcome to the community. Yes, that is normal. It's your XIM letting you know when subconfigs have been activated/deactivated. The color of the light matches the header of the subconfig in Manager.
-
The new firmware has messed up the toggle ads. It causes it to skip or do a double pump before going into a full ads (BO4)
-
Im not able to use W key in the beginning of every fortnite game unless i hit A or D first.
Also still getting the input blocked pop up.
-
The new firmware has messed up the toggle ads. It causes it to skip or do a double pump before going into a full ads (BO4)
RML, did you see anything like this in your testing?
Nytemare01, can you be more specific about what's happening? In particular, is it like the left trigger is being pressed and released and pressed again quickly?
-
Should I update this ? I'm on.20 181109
-
The new firmware has messed up the toggle ads. It causes it to skip or do a double pump before going into a full ads (BO4)
RML, did you see anything like this in your testing?
Nytemare01, can you be more specific about what's happening? In particular, is it like the left trigger is being pressed and released and pressed again quickly?
I'll look into it.
Can you post your full config?
I did find another bug though with subs. But that bug exists on the 1109 build as well. It's hard to explain and I don't have video catcha right now.
I'll start a thread in the Alpha section, I'd like Od1n and or mist to test it as well.
-
Toggle ADS works fine for me, I'm assuming you're using Nom4d button layout in game?
Can you better describe the issue?
-
Not using the NOMAD but default setting as I always have. All I did was update the firmware and manager, then restored my settings, nothing else. Yeah when I hit my ads button it quickly starts to zoom in, but about 1/5 into the animation it goes back out, then finally goes into full ads.
-
I've also changed mice and still the same result
-
Is this firmware any different to the last BETA FW for Black Ops 4 or is it mainly for games like RDR2?
-
Hmm, I didn't see anything like this during testing but will need to take a look. Are you using the Deactivation keys too (i.e. simulating toggle ADS in CoD)?
-
Yes I'm using the simulate toggle. also using deactivation keys which I always have been. But have not set a deactivation delay.
-
When I disable the toggle ads on the xim, there is no longer any issue, but when I reactivate toggle ads it starts again. You really notice it when your character is standing or walking but not sprinting
-
When I disable the toggle ads on the xim, there is no longer any issue, but when I reactivate toggle ads it starts again. You really notice it when your character is standing or walking but not sprinting
Ok thanks, I'll take a look. In the mean time you can downgrade firmware.
-
Do I need to downgrade the manager also?
-
Do I need to downgrade the manager also?
Can you post your config code so I can take a look at it? Before you downgrade?
-
No you don't need to downgrade Manager. Just the firmware.
-
Do I need to update to this new firmware?
-
IOS Testflight XIM Manager is available
-
Do I need to upgrade to this?????
-
Could you guys add the copy - paste functionality to it? It is really poor experience to have to either back up configs or do it manually again.
Backup configs is not working well on the last beta version as it seems my character ( in fortnite) drifts to the right using the same config previously setup.
Please?
Huh? Copy/Paste settings have always been there, and still are...
Before replying with “huh” ffs, DO YOU NEED ME TO DRAW IT FOR YOU?
Between beta firmwares , the copy paste is not working, at least on my side. Not even mentioned that the functionality is missing , I am talking about not working!
-
Please keep in mind that this is a beta build. While the Xim team always strive for excellence they also try to expedite some things that are important to the community. This build significantly improves the gaming experience for RDR2 and also the way subs are prioritized. Unfortunately, with change can come unforeseen challenges. And while these builds are tested prior to beta, occasionally some bugs may sneak by. But thats also why its offered in Beta, this gives the community an oppurtunity to help test and improve the product.
So thank you for participating in the beta and offering feedback. Thats what its here for. Also thank you for your patience while the team works to correct quality issues within the Beta build. Ofcourse you can always revert back to the latest gold build if you so desire.
Cheers!
-
Copying & pasting full configs is working for me. I tried internal copy/pasting and pasting external code.
-
Are there any benefits to this firmware I’m using it for Destiny but not using a sprint config?
-
I’m guessing support for xim4 is dead
-
Between beta firmwares , the copy paste is not working, at least on my side. Not even mentioned that the functionality is missing , I am talking about not working!
When new settings are added the copy/paste format changes to include the new settings. So, anything you copied from the last firmware and pasted to the new (and vice versa) won't work. Is this the issue you are seeing?
-
I’m guessing support for xim4 is dead
XIM4 will always receive game updates. But, it's out of room (memory) for new features and settings.
-
I’m guessing support for xim4 is dead
XIM4 will always receive game updates. But, it's out of room (memory) for new features and settings.
Is xim apex almost out of memory??? Too?
-
Is xim apex almost out of memory??? Too?
No, still headroom there. :)
-
Is xim apex almost out of memory??? Too?
No, still headroom there. :)
Haha XD how much headroom is the question
-
Während ich im Spiel (Fortnite) mein Inventar sortiere erscheint seit ein paar Tagen der Hinweis „Gerät blockiert“ mit einem „Maus/Tastaur“ Symbol. Ich konnte bisher danach aber normal weiterspielen. Muss ich etwas anderes einstellen?
-
Is this firmwire god for Fortnite? Or can i stay on old version?
-
Don't know if its me but slight character drift to right have not change analog deadzone both are 7500
-
Während ich im Spiel (Fortnite) mein Inventar sortiere erscheint seit ein paar Tagen der Hinweis „Gerät blockiert“ mit einem „Maus/Tastaur“ Symbol. Ich konnte bisher danach aber normal weiterspielen. Muss ich etwas anderes einstellen?
Stellen Sie sicher, dass Sie die Option zum Simulieren von analogem Verhalten verwenden
-
I got to say this beta has worked without any noticeble issues. I still get disconnected occasionally but had that since I got the apex, works perfect some days, others not so much. Could be battery, ps4pro ports, wires, bluetooth or whatever. Nevertheless moving on, I tested the previous Beta and I had to delete it after 1 day of test trial. Aim was off, x/y felt not 1:1. My crosshair could jump straight down to the ground when swiping left or right to turn 180°. Recoil control was terrible but with this Beta non of those issues are left. Very nice. Btw testing it in Siege so I don't really need the SA or BOOST. I've just tried it out for learning exp. Goin to test Analog Behaviour today. I think that option gave me a few problems with the last beta. W key = Forward stopped function. Hopefully I won't walk into that again LOL. Very happy so far!! This Beta feels much better, more precise. Got a few Aces with it. Good job XIM team.
-
Sorry to hear you are getting disconnects. That should never happen (we run stress test on XIM and will run on consoles -- like PS4 -- for up to 24 hours at a time). Could the connection itself between your XIM and PS4 be the issue? If you touch the XIM while it's plugged in does it cause a disconnect?
-
I have an issue at least I think I do. I updated my apex to the latest flash no problem. But the beta for Android does nothing. If I delete the app from my phone or tablet and hit the link it directs me to the play store. I reinstalled and checked the build number and it matches. But no steady aim or boost show up. I can download the apk to my laptop but haven't figured out how to get the apk onto my android devices to try and install.
-
All you should need to do is click on the APK from your web browser on your phone and tell it to install. Or, if it downloads then go to your Downloads folder and click on it there and tell it to install.
-
Cant Download the Android Manager. Can anyone help me?
Ty
-
Cant Download the Android Manager. Can anyone help me?
Try pressing and holding the link and seeing if you get a popup that gives you a download option.
-
So I am getting some double pump ADS issues with the toggle aiming feature on this beta for Black Ops. I haven't tested it on BFV or Siege yet. I added a video so you could see what I'm talking about. The first two are the double pump and the third ads is if I hold instead of toggle.
https://youtu.be/SXvylY7kDMQ
-
So I am getting some double pump ADS issues with the toggle aiming feature on this beta for Black Ops. I haven't tested it on BFV or Siege yet. I added a video so you could see what I'm talking about. The first two are the double pump and the third ads is if I hold instead of toggle.
https://youtu.be/SXvylY7kDMQ
Admin is aware of the issue and needing some time to debug. Are you using an ADS delay? If so, What is it? Do you have the same issue without a delay?
-
[/quote]
Admin is aware of the issue and needing some time to debug. Are you using an ADS delay? If so, What is it? Do you have the same issue without a delay?
[/quote]
I was playing with ADS delay of 165ms. The problem seems to have gone away with 0 ADS delay.
-
Admin is aware of the issue and needing some time to debug. Are you using an ADS delay? If so, What is it? Do you have the same issue without a delay?
[/quote]
I was playing with ADS delay of 165ms. The problem seems to have gone away with 0 ADS delay.
[/quote]
Does 0 ads delay work well for black ops?
-
Cant Download the Android Manager. Can anyone help me?
Try pressing and holding the link and seeing if you get a popup that gives you a download option.
That works. Didn't think of holding on it never had to with posted links before. Thanks.
-
Sorry to hear you are getting disconnects. That should never happen (we run stress test on XIM and will run on consoles -- like PS4 -- for up to 24 hours at a time). Could the connection itself between your XIM and PS4 be the issue? If you touch the XIM while it's plugged in does it cause a disconnect?
Used to happen yes but not anymore. I've tried different ports the 2 in front and the 1 back. No difference. I bought a controller charger that I plug to the wall to keep it charged all times. Has improved alot since but still get the disconnects from time to time. Run no rgb stuff. Got a charge & transfer cable. Don't get why the issue appear. Luckily the Xim is so amazing overall I could live with this problem. If I found out a solution would be great but when it works it's the best thing. Without it I can't play because of a injure I got from many years using a controller. That's not even a joke haha.
-
Admin is aware of the issue and needing some time to debug. Are you using an ADS delay? If so, What is it? Do you have the same issue without a delay?
I was playing with ADS delay of 165ms. The problem seems to have gone away with 0 ADS delay.
[/quote]
Does 0 ads delay work well for black ops?
[/quote]
Yea It works decently well. Slows down snap shots a tiny bit.
-
I can’t use 0 delay on blackops it’s messes me up badly, what’s recommended?
-
can i use this manager with the 11.09 firmware? or do I need to update the firmware to this one?
-
You'll need to upgrade to this one in order to access the new features.
-
Should I use delay for PUBG????
-
Are there any problems with the xim apex and the joy con? Would like to buy a joy con.
-
You'll need to upgrade to this one in order to access the new features.
Obs what’s the official word on ads delay for blackops?
-
i have a problem with this build that i discovered last night because it was the first time i try it.
anyway, if i unchecked the inherit option in the ads menu i can use the SAB feature for the ads only not the hip, which is interesting for me, however once i press the ads button and start shooting then stop and release the ads and press it again fast, the gun will shoot by itself without me firing, this happens only when i enable SAB for ads, when the SAB is enabled for the hip with the inherit option checked it works perfectly.
this problem occurred on fortnite with a 120 SAB on ads only.
-
Hey what's the word on the double pump toggle ads issue?
-
i have a problem with this build that i discovered last night because it was the first time i try it.
anyway, if i unchecked the inherit option in the ads menu i can use the SAB feature for the ads only not the hip, which is interesting for me, however once i press the ads button and start shooting then stop and release the ads and press it again fast, the gun will shoot by itself without me firing, this happens only when i enable SAB for ads, when the SAB is enabled for the hip with the inherit option checked it works perfectly.
this problem occurred on fortnite with a 120 SAB on ads only.
The gun auto fire is a Fortnite bug, not the Xim's fault. Usually occurs when a certain button combo happens with fast inputs.
-
Are there any problems with the xim apex and the joy con? Would like to buy a joy con.
I have a used a joycon before. Works great!
-
Are these settings still working and valid as of 1/10/2018 using the link in the original post for firmware and manager software? Haven’t been able to get it working so far.
-
Hello @ all,
i have a problem with my xim, i want to update the newest firmware, for the :
● Simulate Analog Behavior: For keyboard users, outputs controller values similar to that of the gamer using a thumbstick. Higher values produce a stronger effect. Located under Movement expert settings.
And i tried almost everything, Factory Reset, Upgrade again and again. But i dont see the option in movement :Simulate Analog Behavior
And yes i have developer mode on..
Please help
-
Hello @ all,
i have a problem with my xim, i want to update the newest firmware, for the :
● Simulate Analog Behavior: For keyboard users, outputs controller values similar to that of the gamer using a thumbstick. Higher values produce a stronger effect. Located under Movement expert settings.
And i tried almost everything, Factory Reset, Upgrade again and again. But i dont see the option in movement :Simulate Analog Behavior
And yes i have developer mode on..
Please help
Welcome to the community. Can you open up About under Manager and tell us what version numbers you see there?
-
Hello @ all,
i have a problem with my xim, i want to update the newest firmware, for the :
● Simulate Analog Behavior: For keyboard users, outputs controller values similar to that of the gamer using a thumbstick. Higher values produce a stronger effect. Located under Movement expert settings.
And i tried almost everything, Factory Reset, Upgrade again and again. But i dont see the option in movement :Simulate Analog Behavior
And yes i have developer mode on..
Please help
Welcome to the community. Can you open up About under Manager and tell us what version numbers you see there?
Thanks for your quick reply :)
In the German Section i post my Problem too and Odin told me that i must update my Manager on Android too, to get the accses of the new features. But at the moment i am working, i allready uninstalled the old manager and installed the new one from your latest firware post.
I will try it if i am @ home and give you feedback. ;)
-
Während ich im Spiel (Fortnite) mein Inventar sortiere erscheint seit ein paar Tagen der Hinweis „Gerät blockiert“ mit einem „Maus/Tastaur“ Symbol. Ich konnte bisher danach aber normal weiterspielen. Muss ich etwas anderes einstellen?
Stellen Sie sicher, dass Sie die Option zum Simulieren von analogem Verhalten verwenden
Where is the option to simulate analog behavior? I cannot seem to find it and I keep getting mouse and keyboard blocked messages also on fortnite.
-
So there’s a problem I think others have this problem also when unchecking inherit hip settings when you ads the gun shoots on its own
-
Where is the option to simulate analog behavior? I cannot seem to find it and I keep getting mouse and keyboard blocked messages also on fortnite.
It's under the "Keyboard" section when Expert is enabled. Press on the "..." to show it.
-
Hi everyone
I got a weird problem recently
After settling any config and playing with it several hours a macro hapens between the mouse right click and the Q button also between the right click and the C button when i hold the right click and the Q button it triggers the L1 on the ps4 and it infects all other configs.
I had to delete the configs one by one and download it again.
When it happened i tried changing the keypoard and mouse and it still happens.
I got this problem in this Beta unfortunately i dont know how to downgarde to test it on previous Betas or the official version.
anyone got my problem?
-
Having a issue with the new firmware now. was working fine but now the xim flashes purple and doesn't do anything when i send commands to it. have to unplug the xim and replug it in for it to work again. this started yesterday but been using the update for a while now.
-
Having a issue with the new firmware now. was working fine but now the xim flashes purple and doesn't do anything when i send commands to it. have to unplug the xim and replug it in for it to work again. this started yesterday but been using the update for a while now.
It means that the update rate of your mouse doesn't match that of your mouse.
-
Hi everyone
I got a weird problem recently
After settling any config and playing with it several hours a macro hapens between the mouse right click and the Q button also between the right click and the C button when i hold the right click and the Q button it triggers the L1 on the ps4 and it infects all other configs.
I had to delete the configs one by one and download it again.
When it happened i tried changing the keypoard and mouse and it still happens.
I got this problem in this Beta unfortunately i dont know how to downgarde to test it on previous Betas or the official version.
anyone got my problem?
I think its now solved i kept playing and all is ok
I found the solution in a thread here
Had this issue with PUBG and fortnite. On beta firmware and I'm still using it. Took a few seconds after loading into lobby and also jumping from plane before I could move. I had to change sab value to 1 instead of 0.
-
IMPORTANT: This Beta requires you upgrade both firmware and Manager in order to access the new features. Please use the links below.
This is a BETA firmware build that, based on community request, brings in the Boost setting and Steady Aim experimental test feature from XIM4. It also includes a new feature for keyboard users: Simulate Analog Behavior. These are advanced features that should be used with caution as they can negatively affect aiming performance if not used correctly. This build also includes a new subconfig Deactivation Delay feature for games that require it.
● Steady Aim: Unlike Smoothing which produces uniform mouse stabilization, Steady Aim forcibly restricts mouse movement into discrete values. Higher values produce a stronger effect. Located under Aim expert settings.
● Boost: Boost artificially inflates the game's aiming stick dead zone. Be advised that values too large will significantly degrade micro-aiming performance. Located under Mouse expert settings.
● Simulate Analog Behavior: For keyboard users, outputs controller values similar to that of the gamer using a thumbstick. Higher values produce a stronger effect. Located under Movement expert settings.
● Deactivation Delay: Similar to a subconfig's (such as ADS) Activation delay, a Deactivation delay waits for the specified time before it's longer active. Located under each subconfig's Activation settings.
● Deactivation Priority: Prior to this change, when a subconfig is no longer active, return to Hip settings occurs. Now, if there is a subconfig between the active and Hip that is currently activated, it is selected (rather than Hip).
XIM APEX Firmware
Download XIM APEX Firmware Tool 20181204 for PC (http://cloud.xim.tech/Beta/XIMAPEXFlash-20181204-PC.exe)
Windows 7/8/8.1/10 x86/x64
Download XIM APEX Firmware Tool 20181204 for Mac (http://cloud.xim.tech/Beta/XIMAPEXFlash-20181204-Mac.zip)
macOS 10.11 or higher
Flash Upgrade Instructions (instructional video (https://youtu.be/fYlwNXl-ZGw)):
1. Hold down the button on your XIM APEX
2. Plug your XIM APEX into your computer while continuing to hold the button
3. Wait for your XIM APEX's light to display blue and then release the button
4. Download and run the XIMAPEXFlash tool
5. Select Update Firmware
6. Disconnect your XIM APEX from your computer after the tool completes
XIM APEX Manager
Download XIM APEX Manager 20181204 for iOS (https://testflight.apple.com/join/1IAp7e3i) (← Join our TestFlight by clicking the link from your iOS device)
iOS 8 or higher
Download XIM APEX Manager 20181204 for Android (http://cloud.xim.tech/Beta/XIMAPEXManager-20181204-Android.apk) (Direct APK download)
Android 4.4 or higher
Download XIM APEX Manager 20181204 for PC (http://cloud.xim.tech/Beta/XIMAPEXManager-20181204-PC.exe)
Windows 10/8.1/8 x86/x64
Hey guys, currently im still running 20181109 for manager and firmware. is it worth upgrading and changing to the latest BETA?
-
IMPORTANT: This Beta requires you upgrade both firmware and Manager in order to access the new features. Please use the links below.
Hey guys, currently im still running 20181109 for manager and firmware. is it worth upgrading and changing to the latest BETA?
Yes
-
Hello. I'm having trouble here, I can't find Simulate Analog Behavior, Boost, etc. I've updated both firmware manger to the latest versions. I Also factory reset xim apex and deleted manager app from my iPhone and redownloaded again still nothing . Do you guys think I need IOS 12?
-
Hello. I'm having trouble here, I can't find Simulate Analog Behavior, Boost, etc. I've updated both firmware manger to the latest versions. I Also factory reset xim apex and deleted manager app from my iPhone and redownloaded again still nothing . Do you guys think I need IOS 12?
I use iOS 10 and it works fine. Go back and follow all of the steps very carefully. Make sure you enable advanced settings after firmware update so you can actually see the advanced settings.
-
Hello. I'm having trouble here, I can't find Simulate Analog Behavior, Boost, etc. I've updated both firmware manger to the latest versions. I Also factory reset xim apex and deleted manager app from my iPhone and redownloaded again still nothing . Do you guys think I need IOS 12?
I use iOS 10 and it works fine. Go back and follow all of the steps very carefully. Make sure you enable advanced settings after firmware update so you can actually see the advanced settings.
Do you mean Enable expert configuration? I'm having trouble finding the advance settings.
-
Factory reset and updated both firmware and manager and noe my sens is skyrocket high using the same config as before. And yes i use sync off.. on blackops 4 i used 40/20 hip/ads sync off and now this is unplayable. Any suggestions?
-
Double check your polling rate. When using off sync sens is tied to polling rate so make sure you're using the same as before. Also you need to unplug your xim after adjusting polling rate.
-
Do i need to use SAB on fortnite with this one to not be "detected"?
If yes, what value is recommended
-
the manager for PC gives me a "Failure writing XIM APEX [6]" error.