XIM Community
XIM APEX => Downloads => Beta => Topic started by: OBsIV on 11:43 AM - 11/14/18
-
IMPORTANT: This Beta requires you upgrade both firmware and Manager in order to access the new features. Please use the links below.
This is a BETA firmware build that, based on community request, brings in the Boost setting and Steady Aim experimental test feature from XIM4. It also includes a new feature for keyboard users: Simulate Analog Behavior. These are advanced features that should be used with caution as they can negatively affect aiming performance if not used correctly.
● Steady Aim: Unlike Smoothing which produces uniform mouse stabilization, Steady Aim forcibly restricts mouse movement into discrete values. Higher values produce a stronger effect. Located under Aim expert settings.
● Boost: Boost artificially inflates the game's aiming stick dead zone. Be advised that values too large will significantly degrade micro-aiming performance. Located under Mouse expert settings.
● Simulate Analog Behavior: For keyboard users, outputs controller values similar to that of the gamer using a thumbstick. Higher values produce a stronger effect. Located under Movement expert settings.
XIM APEX Firmware
Download XIM APEX Firmware Tool 20181109 for PC (http://cloud.xim.tech/Beta/XIMAPEXFlash-20181109-PC.exe)
Windows 7/8/8.1/10 x86/x64
Download XIM APEX Firmware Tool 20181109 for Mac (http://cloud.xim.tech/Beta/XIMAPEXFlash-20181109-Mac.zip)
macOS 10.11 or higher
Flash Upgrade Instructions (instructional video (https://youtu.be/fYlwNXl-ZGw)):
1. Hold down the button on your XIM APEX
2. Plug your XIM APEX into your computer while continuing to hold the button
3. Wait for your XIM APEX's light to display blue and then release the button
4. Download and run the XIMAPEXFlash tool
5. Select Update Firmware
6. Disconnect your XIM APEX from your computer after the tool completes
XIM APEX Manager
Download XIM APEX Manager 20181109 for iOS (https://testflight.apple.com/join/1IAp7e3i) (← Join our TestFlight by clicking the link from your iOS device)
iOS 8 or higher
Download XIM APEX Manager 20181109 for Android (http://cloud.xim.tech/Beta/XIMAPEXManager-20181109-Android.apk) (Direct APK download)
Android 4.4 or higher
Download XIM APEX Manager 20181109 for PC (http://cloud.xim.tech/Beta/XIMAPEXManager-20181109-PC.exe)
Windows 10/8.1/8 x86/x64
-
this is the best firmware we have had so far!
Simulate Analog Behaviour reduces the amount of issues with the aim assist to a minimum! :)
i can only recommend everyone to give this new version a try!
-
this is the best firmware we have had so far!
Simulate Analog Behaviour reduces the amount of issues with the aim assist to a minimum! :)
i can only recommend everyone to give this new version a try!
sounds promising, just have to wait for the mac version.😅
-
Od1n SAB is in movement on WASD, left stick, so I guess its a detection thing. What has it to do with aim assist? You mean Boost or Steady aim?
-
Will there be a XIM APEX Manager 20181109 for PC?
-
is it already Christmas today? Boost and steady Aim. wow madness i am happy.
I love you and all XIM Team :o
-
Od1n SAB is in movement on WASD, left stick, so I guess its a detection thing. What has it to do with aim assist? You mean Boost or Steady aim?
aim assist is implemented not only with analog aiming in mind but also analog movement
hence you have a much better aim assist with a sony nav + mouse than with a keyboard + mouse
this feature brings the two much closer to each other and solves most of the aim assist problems you have with a keyboard, such as being pushed away from the target or having a hard time to break into the aim assist bubble :)
-
Didn’t know its left stick also. Thought its only right stick. I mean I knew its different when you move or stay put.
-
Best Firmware ever !! :)
-
I've set my Simulate analog behaviour to 200 just to test out the difference. My character cancels out the sprint on taking moderate to sharp turns and on bumping to objects. Feels like I've to hold down the shift button to remain sprinting.
-
Just a note for BO4 - Simulate Analog has a cap of 65 before it'll cancel Sprint. I expect there'll be similar value thresholds in other games. The beaut thing here is OBsIV has made it adjustable.
It's also noteworthy that the intent of this functionality is to obfuscate our Xims in case of input detection heuristics. It's best to leave it disabled, unless experimenting with AA, or if Fortnite enables kb input detection again.
I'm glad everyone gets to play with this FW release, we've been testing it for a week or two. I know a number of you have been asking for Steady Aim and Boost on Apex for quite some time :)
-
Just a note for BO4 - Simulate Analog has a cap of 65 before it'll cancel Sprint. I expect there'll be similar value thresholds in other games.
It's also noteworthy that the intent of this functionality is to obfuscate our Xims in case of input detection heuristics, so best to leave it disabled, unless experimenting with AA.
i have a analog keyboard logitech G13 and R600 ; do you think this firmware is so good really or not, i play 100% of my time in Blackout with your setup sync off ;
-
OMG...
You are truly a god OBSiV..
Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..Thank you..
:'( :'( :'(
-
i have a analog keyboard logitech G13 and R600 ; do you think this firmware is so good really or not, i play 100% of my time in Blackout with your setup sync off ;
This firmware is a must-have upgrade. By default, it's exactly the same as the gold firmware with all of these new toys disabled by default. So if you use Sync Off and OBsIV's quantisation curves, you can continue to do so (I have).
But, let's say you wanted to use an acceleration curve with a touch of Boost and some Simulate Analog, remove the curve and play around with Steady Aim instead.
So basically, Steady Aim now removes the need for the curve so we can add other stuff on top of it. But, if you're happy with your current settings, upgrading the FW won't change anything, until you play around with the new toys.
IMHO, this is the biggest and best Xim FW released in a decade, with more capacity to tweak our settings than any other version. OBsIV has addressed everyone's concerns and delivered a killer update.
-
this is the best firmware we have had so far!
Simulate Analog Behaviour reduces the amount of issues with the aim assist to a minimum! :)
i can only recommend everyone to give this new version a try!
Sir! Looking forward for a video that explains what these new settings do and how to use them properly :)
-
you should have special settings for steady aim? some can share cfg?
-
i have a analog keyboard logitech G13 and R600 ; do you think this firmware is so good really or not, i play 100% of my time in Blackout with your setup sync off ;
This firmware is a must-have upgrade. By default, it's exactly the same as the gold firmware with all of these new toys disabled by default. So if you use Sync Off and OBsIV's quantisation curves, you can continue to do so (I have).
But, let's say you wanted to use an acceleration curve with a touch of Boost and some Simulate Analog, remove the curve and play around with Steady Aim instead.
So basically, Steady Aim now removes the need for the curve so we can add other stuff on top of it. But, if you're happy with your current settings, upgrading the FW won't change anything, until you play around with the new toys.
IMHO, this is the biggest and best Xim FW released in a decade, with more capacity to tweak our settings than any other version. OBsIV has addressed everyone's concerns and delivered a killer update.
Wouldnt this "Simulate Analog" be a thing for Destiny also? Often I feel the movement in air much nicer with a nav compare to keyboard. Will this maybe open up that for new settings?
-
Wouldnt this "Simulate Analog" be a thing for Destiny also? Often I feel the movement in air much nicer with a nav compare to keyboard. Will this maybe open up that for new settings?
Potentially, yes. Because Destiny 2 has slow changes of direction, Simulate Analog may help to manipulate AA whilst not negatively impacting movement. A lot of the "more vs less AA" experimentation originated with Destiny. It won't however allow for granular control movement speed (e.g 30% stick deflection), nor vary a great deal from the 8 WASD vectors.
In games with fast changes of direction like Black Ops 4, the value of analog input is questionable as AA is already overwhelmingly strong. If anything, we want to minimise rather than increase AA in this game. However, Simulate Analog can be used to experiment with AA to see if we can generate a 'snap-on' AA effect in BO4.
These are very early days for what amounts to very big tools in our Xim arsenal. Collectively, it's going to take us some time to figure out good game settings. Remember to start low rather than high - maxed settings for each of these dials will be unplayable.
-
Hey Obsiv, what's the range for Steady Aim for like a reference of what's strong, weak or about half way?
-
this is the best firmware we have had so far!
Simulate Analog Behaviour reduces the amount of issues with the aim assist to a minimum! :)
i can only recommend everyone to give this new version a try!
Sir! Looking forward for a video that explains what these new settings do and how to use them properly :)
video should be out tomorrow :)
-
After 5 minutes of gameplay in duos , pop up a message , input blocked ,just for a second than all back to normal , I set my simulate analog to 50
-
After 5 minutes of gameplay in duos , pop up a message , input blocked ,just for a second than all back to normal , I set my simulate analog to 50
It popped up just once and only paused input for a couple of seconds?
-
(https://i.imgur.com/5Tf1O7F.jpg)
I can't believe it this is everything we have been waiting for! And it's not even christmas yet! ;D
-
After 5 minutes of gameplay in duos , pop up a message , input blocked ,just for a second than all back to normal , I set my simulate analog to 50
if it pops up again please try a value of 100 and let us know if it comes up again
-
After 5 minutes of gameplay in duos , pop up a message , input blocked ,just for a second than all back to normal , I set my simulate analog to 50
It popped up just once and only paused input for a couple of seconds?
Impossible say if input be paused it s like a fragment of second . Happen in inventory
-
I've been searching around online and I see other instances of this -- not sure of their setup/situation. What is supposed to happen if you start a game on controller and then plug in a mouse and keyboard after the match starts? Does it still do this popup, or, does it actually boot?
-
This happened today for me once, using the beta19 firmware ( not this latest beta), I couldn’t reproduce it at all...like could not...maybe it is one time only?
I was as well using the inventory...maybe related to using the inventory?
but I was not blocked, it was really really fast though..
-
There is something that intrigues me its simulates the analog behavior of a keyboard but the Logitech G13 is analog, does it change something or degrades the movement ?
-
Hi obsiv where any changes made to the final release or should i just stick with the alpha?
-
Hi obsiv where any changes made to the final release or should i just stick with the alpha?
I'd upgrade to this one since it's latest released. Thanks again for all your testing and feedback. :-)
-
Your welcome man thanks for listening to the community and constantly improving an already amazing product 😊. I hope that i can maybe test out new firmwares in the future 😉.
-
All i got to say is thank you so much. With this update my aim actually feels normal now. (After years of playing with jacked up settings with my xim2,3,and 4)
Everything is so perfect now :) That was some hard coding to accomplish, i am glad you got it working! I'd buy you a beer but you live in cali lol
-
I’ve downloaded this using TestFlight and I don’t have any of these settings ?
-
Do you have expert mode ticked?
-
All i got to say is thank you so much. With this update my aim actually feels normal now. (After years of playing with jacked up settings with my xim2,3,and 4)
Everything is so perfect now :) That was some hard coding to accomplish, i am glad you got it working! I'd buy you a beer but you live in cali lol
Just curious what kind of adjustments did you make?
-
All i got to say is thank you so much. With this update my aim actually feels normal now. (After years of playing with jacked up settings with my xim2,3,and 4)
Everything is so perfect now :) That was some hard coding to accomplish, i am glad you got it working! I'd buy you a beer but you live in cali lol
Just curious what kind of adjustments did you make?
first off i was take the first point of the ballistic curve and starting it at about .20 to give the curve acceleration. now it does not need that. just a nice 300 boost and 3 SA and it feels almost close to my old settings back in the day. the .20 was jittery and unplayable
-
I haven't got to test this yet, but I just wanted to say Thanks Obsiv for going through the effort of bringing us these tools to tweak to our liking. I haven't been very active over the years, but I used to be pretty active with RC testing and all of that. Black ops 4 and a bit of destiny have sparked my interest again. The ST's are amazing, but I've always needed to have more options to get my best personal feel, as mouse on Console is tricky to get that right feeling. I'm grateful that you continue to show support for us who need more options to get the best out of their experience. I sincerely thank you and can't wait to test away. Thanks again.
-
All i got to say is thank you so much. With this update my aim actually feels normal now. (After years of playing with jacked up settings with my xim2,3,and 4)
Everything is so perfect now :) That was some hard coding to accomplish, i am glad you got it working! I'd buy you a beer but you live in cali lol
Just curious what kind of adjustments did you make?
first off i was take the first point of the ballistic curve and starting it at about .20 to give the curve acceleration. now it does not need that. just a nice 300 boost and 3 SA and it feels almost close to my old settings back in the day. the .20 was jittery and unplayable
So no curves at all? Just adjustments to the new settings?
-
All i got to say is thank you so much. With this update my aim actually feels normal now. (After years of playing with jacked up settings with my xim2,3,and 4)
Everything is so perfect now :) That was some hard coding to accomplish, i am glad you got it working! I'd buy you a beer but you live in cali lol
Just curious what kind of adjustments did you make?
first off i was take the first point of the ballistic curve and starting it at about .20 to give the curve acceleration. now it does not need that. just a nice 300 boost and 3 SA and it feels almost close to my old settings back in the day. the .20 was jittery and unplayable
So no curves at all? Just adjustments to the new settings?
You dont need curves with boost. it makes it pointless, but i always played with the same curve,so i just lowered my DPI and kept my curves so its not a micro movement, jitter screen shaking disaster.
-
All i got to say is thank you so much. With this update my aim actually feels normal now. (After years of playing with jacked up settings with my xim2,3,and 4)
Everything is so perfect now :) That was some hard coding to accomplish, i am glad you got it working! I'd buy you a beer but you live in cali lol
Just curious what kind of adjustments did you make?
first off i was take the first point of the ballistic curve and starting it at about .20 to give the curve acceleration. now it does not need that. just a nice 300 boost and 3 SA and it feels almost close to my old settings back in the day. the .20 was jittery and unplayable
So no curves at all? Just adjustments to the new settings?
You dont need curves with boost. it makes it pointless, but i always played with the same curve,so i just lowered my DPI and kept my curves so its not a micro movement, jitter screen shaking disaster.
Ah ok thanks for the info
-
I love this update. One hiccup on bo4 that I’m finding is when I put in joystick analog behavior any amount of value whenever I ads and shoot it works then when I unADS then immediately re ADS it shoots one bullet randomly before I press the trigger button. Anyone notice that?
-
I touch my right mouse click and it shoots one bullet when I engage the ADS immediately after shooting ADS’ed. And when I put the analog value back to 0 it doesn’t do that then I put it to 5 and it does that.
-
Any good settings for Fortnite with the new variables applied?
I'm
5750 DPI
11.65 sens
Common
NO smoothing
So many variables but 3.0 steady aim and 20 boost with 5 simulate analog behavior seems like a starting point...
Thoughts?
-
Id love to know what value for Steady Aim would match Xim4's Steady Aim and if possible SA3 aswell. :)
-
I’ve tried 5 different mice with this analog input update clicking in the right mouse click immediately after holding down both mouse clicks ADS shooting it randomly shoots one bullet as I ADS again.anyone else experience this glitch in COD BO4????
-
Btw steady aim seems to work better with default sync than common producing less stutter.
-
Really like the additional features that this firmware brings. I do feel that all the people that wanted steady aim and boost are now going to be making a lot of posts about what settings to use now. Good job on the update 👌
-
Hey Everyone,
I assume this is for PS4? I updated my XIM APEX with this version and when i goto my APEX Manager on my iphone, i dont see these options there. Also, is this still plug and play so i can use this with my config from 20180501, so i hope it doesnt mess with my config so i can just keep playing like i used to until i can find these settings heh
Will this make Aim Assist feel stronger then? which one these will do that? i also use a keyboard
Steady Aim: Unlike Smoothing which produces uniform mouse stabilization, Steady Aim forcibly restricts mouse movement into discrete values. Higher values produce a stronger effect. Located under Aim expert settings.
● Boost: Boost artificially inflates the game's aiming stick dead zone. Be advised that values too large will significantly degrade micro-aiming performance. Located under Mouse expert settings.
● Simulate Analog Behavior: For keyboard users, outputs controller values similar to that of the gamer using a thumbstick. Higher values produce a stronger effect. Located under Movement expert settings.
-
@ OBsIV, this is by far the best update, great work to all Team Xim :) 8)
-
I’ve tried 5 different mice with this analog input update clicking in the right mouse click immediately after holding down both mouse clicks ADS shooting it randomly shoots one bullet as I ADS again.anyone else experience this glitch in COD BO4????
Can anyone else reproduce this behavior?
-
It’s odd it doesn’t matter what gun I use or what mouse and I don’t even have to shoot if I just run around and ads maybe 2 out of every 10 times i ADS a random shot will fire. The weirdest thing the only reason it throws me off is when you pre aim a lane or poke out and ADS sometimes it will misfire like that and throw off the aim for a split second which in COD could mean the difference sometimes. Other than that this update is amazing. I tried all values even happens at 5 and 65 but not when I put it at 0.
-
Hi everyone
yesterday I tried the new configuration but I do not understand if the new parameters need to be changed on both HIP and AIM Down?
If possible it would take a tutorial that better explains the functionality and correlations between the functionalities so as to achieve maximum precision and stability using keyboard + mouse
Thank you
-
I’ve tried 5 different mice with this analog input update clicking in the right mouse click immediately after holding down both mouse clicks ADS shooting it randomly shoots one bullet as I ADS again.anyone else experience this glitch in COD BO4????
Can anyone else reproduce this behavior?
Few members downloaded but can’t see new options ?
I’ve downloaded with test flight but still can’t see any options? Are you sure you pushed correct version to test flight
-
When everyone talks about SA3, are they talking about an ADS steady aim value of 3.0 or 30.0 because it goes up to 100
-
When everyone talks about SA3, are they talking about an ADS steady aim value of 3.0 or 30.0 because it goes up to 100
Nope SA3 means Steady Aim 3 Build (Experimental Xim4 Firmware) and it only had the option to Enable it not change the value.
So we'll have to wait for OBsIV to hopefully share the values that match xim4's steady aim.
-
I updated to beta and for bo4 right now I have the anti sticky aim curve 1600dpi 250hz with off sync and wanted to play around with steady aim/boost but don’t know what to look for .... do I need to have no curve for it to work better ?
-
I updated to beta and for bo4 right now I have the anti sticky aim curve 1600dpi 250hz with off sync and wanted to play around with steady aim/boost but don’t know what to look for .... do I need to have no curve for it to work better ?
you don't need to use curve if you use boost, which everyone seems to say it is better than curve...but we need the video to be out (hopefully today ) so we can learn more about how to tweak these new features.
-
config copy seems broken to older versions, the kids go crazy in my BF5 generic thread.
-
this is the best firmware we have had so far!
Simulate Analog Behaviour reduces the amount of issues with the aim assist to a minimum! :)
i can only recommend everyone to give this new version a try!
Sir! Looking forward for a video that explains what these new settings do and how to use them properly :)
video should be out tomorrow :)
Patiently waiting :D hopefully we get it today! <3
-
I’ve tried 5 different mice with this analog input update clicking in the right mouse click immediately after holding down both mouse clicks ADS shooting it randomly shoots one bullet as I ADS again.anyone else experience this glitch in COD BO4????
Can anyone else reproduce this behavior?
I've had the same issue in COD, tried values between 50-65.
-
I have a problem when updating this firmware
Once I have updated the firmware, I load my saved configurations and when connecting the xim apex to the xbox it has colored lights and it does not recognize it.
I have tried to return to the firmware without loading my settings (by default) and there it does recognize it, but I have to add my settings of each game one by one.
Is this the case or am I doing something wrong?
So far I have always been able to make a copy and load my settings.
regards
-
OBsIV. When is the XIM APEX Manager 20181109 coming for pc or is it still a work in progress?
-
config copy seems broken to older versions, the kids go crazy in my BF5 generic thread.
I think I'm not the only one who happens to this.
Please have a look
-
Updated my xim to this but can’t find these new values to change in my apex manager? I know I’m probably being stupid.
-
Updated my xim to this but can’t find these new values to change in my apex manager? I know I’m probably being stupid.
You have to download also new manager
-
Ive found it now guys. So with pubg I’m using a curve on hip, do I remove this now and use boost?
-
Ive found it now guys. So with pubg I’m using a curve on hip, do I remove this now and use boost?
if the effect of your curve only boosts your mouse movements then yes id use the new boost feature instead, it allows a much better customization for boost than a curve
if your curve does other stuff such as increasing your mouse sensitivity in certain areas then continue to use it
(maybe its worth it to add some boost on top of it then)
-
Ok thanks guys. You are all awesome.
-
My manager wont update? Help
-
Just updated to the new firmware and manager. Any good settings to use for fornite? With the new boost and steady aim? Because im new to this.
-
hello, concretely how did the steady aim on AA?
-
Hi
How to find steady aim option ? :) please make video detailing all new features.
Many thanks
-
Hi
How to find steady aim option ? :) please make video detailing all new features.
Many thanks
a video is on the way :)
activate the expert mode in the global settings
after that head into your config editing menu, under your sensitivity press the (...) button to find the steady aim
-
Obsiv would be nice to state to update apex manager on first page for the noobs . plus default sync AA is super strong compared to Gold fw plus off sync feels better for AA can we get values for SA from xim4 SA 1-6 would be helpful
-
Wow best fw ever.
Rainbow Six realy good
17/2/4 First round :-* i Love it
-
Wow best fw ever.
Rainbow Six realy good
17/2/4 First round :-* i Love it
What is your sensitivity ?
-
Am I the only one who cannot get manager to download on my iPhone? It’s driving me crazy.
-
Am I the only one who cannot get manager to download on my iPhone? It’s driving me crazy.
remove old XIM AMANAGER from your Iphone
Then install TestFlight on your phone from app store
After that you come to this forum, access this thread and on the first page click on the IOS link and it will open in the Test Flight app and you can install it. it will show up with a orange dot.
good luck
-
Anybody has good settings for pubg on this new update ...from xim apex?
-
Cod is one of the biggest games in the planet right now how has no one other than myself and one other person not tried the analog value option in BO4 and not noticed that ADS bug????? Lol
-
Cod is one of the biggest games in the planet right now how has no one other than myself and one other person not tried the analog value option in BO4 and not noticed that ADS bug????? Lol
maybe its your button bindings?
please share your Simulate Analog Behavior value so other players can try those and check if they also have the ADS bug then
-
One person already has so that’s good but I was just jokingly asking what game everyone else is playing that they haven’t noticed this on COD. All in good fun humor. But I’m glad it’s not just me I thought I was crazy I reset everything tried multiple mice but I get the same result any input value other than 0 results in that random ADS misfire
-
One person already has so that’s good but I was just jokingly asking what game everyone else is playing that they haven’t noticed this on COD. All in good fun humor. But I’m glad it’s not just me I thought I was crazy I reset everything tried multiple mice but I get the same result any input value other than 0 results in that random ADS misfire
which is the lowest value you can use before it happens?
if you go above 65 your sprinting can accidentally cancel, the ads bug happens with values of 65 to less too right?
-
I can’t put in any value. If it’s not 0 that big happens. Keep in mind I don’t even have to shoot, all I have to do is run around and ADS and out of say 10 times randomly it will misfire I bullet just ADS’ing. Super wierd.
-
Anybody has good settings for pubg on this new update ...from xim apex?
No, i cannot find it either. I updated the firmware and the new options werent there. I thought there might be a new XIM Manager software so i checked the app store for IOS and my version was the latest version. I re-downloaded Testflight from back when i used my XIM4 and i dont see anything and says i need a invite.
Also, another issue i have noticed is that when the game first starts in Fortnite, if i hit any of my WASD keys, it will not register or respond. It takes a few secs after i press the button before it finally moves my char. Anyone else have that issue?
-
Six pages of posts and no one has yet to list any settings for Fortnite???
-
Yes I'm having the same issue!! If I press WASD keys it takes a few seconds before it responds!!
-
Yes I'm having the same issue!! If I press WASD keys it takes a few seconds before it responds!!
+1
I was NOT having this issue yesterday however... only this evening...
-
Yes I'm having the same issue!! If I press WASD keys it takes a few seconds before it responds!!
You can fix this ( at least this is what fixed it for me). By changing the values in the movement analog to 100 and you will not be blocked when spawning anymore
-
Video is out guys
-
this is the best firmware we have had so far!
Simulate Analog Behaviour reduces the amount of issues with the aim assist to a minimum! :)
i can only recommend everyone to give this new version a try!
Sir! Looking forward for a video that explains what these new settings do and how to use them properly :)
video should be out tomorrow :)
Patiently waiting :D hopefully we get it today! <3
here is the tutorial video for simulate analog behavior :)
https://community.xim.tech/index.php?topic=72231.0
-
this is the best firmware we have had so far!
Simulate Analog Behaviour reduces the amount of issues with the aim assist to a minimum! :)
i can only recommend everyone to give this new version a try!
Sir! Looking forward for a video that explains what these new settings do and how to use them properly :)
video should be out tomorrow :)
Patiently waiting :D hopefully we get it today! <3
here is the tutorial video for simulate analog behavior :)
https://community.xim.tech/index.php?topic=72231.0
Are we getting boost and steady aim as well? If yes ,what is the ETA?
Thanks for making this for us! Amazing work!
-
if i have enough time the boost video should be out on saturday, the steady aim one could be ready on monday i guess :)
-
if i have enough time the boost video should be out on saturday, the steady aim one could be ready on monday i guess :)
Thank you kind sir!
-
Not seeing the link for the updated Manager for PC.
-
Od1n SAB is in movement on WASD, left stick, so I guess its a detection thing. What has it to do with aim assist? You mean Boost or Steady aim?
aim assist is implemented not only with analog aiming in mind but also analog movement
hence you have a much better aim assist with a sony nav + mouse than with a keyboard + mouse
this feature brings the two much closer to each other and solves most of the aim assist problems you have with a keyboard, such as being pushed away from the target or having a hard time to break into the aim assist bubble :)
im still confused. I understand that aim assist has a correlation to both the right and left stick but the SAB setting itself only has an effect on the Keyboard movement keys (left stick) correct? is aiming with the mouse effected(right stick)?
-
Hey everyone, heres my issue: I play COD, Im using vanilla and absolutely love how aim assist on 1:1 feels. I would say my shot is on most of the time, I aim right on target and have no issues with the aim assist. However, occasionally, I would say like 1/5 gunfights, I aim ever so slightly off target and it feels like there is an aim assist "barrier" that not necessarily "pushes" my aim away from the target but prevents me from "breaking" into it, costing me the gunfight. Would you guys recommend steady aim or a certain amount of boost for this problem? Just need a very slight nudge to break into that aim assist bubble on those occasional gunfights. or perhaps a curve?
-
Yes I'm having the same issue!! If I press WASD keys it takes a few seconds before it responds!!
You can fix this ( at least this is what fixed it for me). By changing the values in the movement analog to 100 and you will not be blocked when spawning anymore
As long as the value is not 0 (off) you won't have this issue of the initial input delay.
-
Not seeing the link for the updated Manager for PC.
It will be added hopefully by this weekend.
-
Not seeing the link for the updated Manager for PC.
It will be added hopefully by this weekend.
ok thanks
-
I have updated the firmware on my xim and even re-downloaded the xim manager on my android phone but I never see the new settings. Any help would be appreciated.
-
I’ve tried 5 different mice with this analog input update clicking in the right mouse click immediately after holding down both mouse clicks ADS shooting it randomly shoots one bullet as I ADS again.anyone else experience this glitch in COD BO4????
Can anyone else reproduce this behavior?
I've had the same issue in COD, tried values between 50-65.
Your the only other person who has the same problem have you found a solution?
-
I am utterly in LOVE with this Firmware update. I just played cod for the last 2 hours straight after hearing about this FW and I can honestly say it's the most fun I've had in COD in a long time. Aiming felt so effortless.
Using BO4 ST with G502 12kdpi 1000hz apex at 1000hz
Using Sync Off, Steady Aim at 5 and Analog Movement at 55.
Feels like I'm playing a different game, in a good way.
-
Wow best fw ever.
Rainbow Six realy good
17/2/4 First round :-* i Love it
What is your sensitivity ?
44 Hip 23 ADS default 6000 Dpi
-
What is steady aim for?
-
i never received an email with my invitation how do i access a code. for testflight
-
i never received an email with my invitation how do i access a code. for testflight
read all pages, this question has been asked already, here you go:
1. Remove old XIM AMANAGER from your Iphone
2.Then install TestFlight on your phone from app store
3. Come to this forum, access this thread and on the first page click on the IOS link:
https://community.xim.tech/index.php?topic=72146.0
https://testflight.apple.com/join/1IAp7e3i
Next after you clik the link, it will open in the Test Flight app and you can install it.
TEST apps, will show up with an orange dot.
good luck
-
I am utterly in LOVE with this Firmware update. I just played cod for the last 2 hours straight after hearing about this FW and I can honestly say it's the most fun I've had in COD in a long time. Aiming felt so effortless.
Using BO4 ST with G502 12kdpi 1000hz apex at 1000hz
Using Sync Off, Steady Aim at 5 and Analog Movement at 55.
Feels like I'm playing a different game, in a good way.
Are you using any curves? I'm torn between your settings, and my old settings with RML's curves. I can't seem to decide which I like best. Perhaps tomorrow I'll have my wife perform a blind test for me.
-
Wow best fw ever.
Rainbow Six realy good
17/2/4 First round :-* i Love it
What is your sensitivity ?
44 Hip 23 ADS default 12000 Dpi
So I guess this firmware does not affect R6S is that right ?
-
hello, if you play with a psnav, simulate analog is useful?
-
no, as it is analog
-
thank you, another question, what is the consequence, if I ride my value steady aim on aim assist?
-
Do we have a timeline for the release of the Mac version update? I know we are all anxious to update our apex and enjoy the new features.
-
I am utterly in LOVE with this Firmware update. I just played cod for the last 2 hours straight after hearing about this FW and I can honestly say it's the most fun I've had in COD in a long time. Aiming felt so effortless.
Using BO4 ST with G502 12kdpi 1000hz apex at 1000hz
Using Sync Off, Steady Aim at 5 and Analog Movement at 55.
Feels like I'm playing a different game, in a good way.
hip and ads sensi and ads delay ?
no boost needed with sync off right?
-
Wow best fw ever.
Rainbow Six realy good
17/2/4 First round :-* i Love it
What is your sensitivity ?
44 Hip 23 ADS default 12000 Dpi
So I guess this firmware does not affect R6S is that right ?
I think it's much smoother.
Here is my complete Settings
1000Hz 6000dpi
In Game
Vertical: 94
Horizon .: 94
Dead left: 29
Dead right: 10
With visor: 83
Full config
>>> XIM APEX [Rainbow Six Siege] START COPY >>>
X5C:AAAAGgA1AC4AMAAwAC4AMgAwADEAOAAxADEAMAA5AAAAIgBSAGEAaQBuAGIAbwB3ACAAUwBpAHgAIABTAGkAZQBnAGVnBAIAAQAAAAAAAAAGAEgAaQBwAQAAAAAAAAEAAAAAAAAAABEwAGQAAQAAAAAAAAAAAAAAAAAAyAGQAlgDIAPoBLAFeAZABwgH0AiYCWAKKArwC7gMgA1IDhAO2A+gEGgRMBH4EsATiBRQFRgV4BaoF3AYOBkAGcgakBtYHCAc6B2wHngfQCAIINAhmCJgIygj8CS4JYAmSCcQYwRgEGCAYkAAAAAAAAAAAGUQAAAAAAECBAUAAB1MHUwUFEABQAJhAXwBQBBhAmUQfAJiIEAEYgFkAWOAYwJiCGUIZQJlAQAAAAAAAGIQAAAAAAAAAAAAAKAEagRqAmmAagEAAAAAAAAAAAAAABwAQQBpAG0AIABEAG8AdwBuACAAUwBpAGcAaAB0AQFAAgAAAAEAAAAAAAAAAAiYAHYAAQAAAAAAAAEADwAAAAAAyAGQAlgDIAPoBLAFeAZABwgH0AiYCWAKKArwC7gMgA1IDhAO2A+gEGgRMBH4EsATiBRQFRgV4BaoF3AYOBkAGcgakBtYHCAc6B2wHngfQCAIINAhmCJgIygj8CS4JYAmSCcQYwRgEGCAYkAAAAAAAAAAAGUQAAAAAAECBAUAAB1MHUwUFEABQAJhAXwBQBBhAmUQfAJiIEAEYgFkAWOAYwJiCGUIZQJlAQAAAAAAAGIQAAAAAAAAAAAAAKAEagRqAmmAagEAAAAAAAAAAAAAABYAQQB1AHgAaQBsAGkAYQByAHkAIAAxAAEAAAAAAAEAAAAAAAAAAAXcAGQAAQAAAAAAAAAAAAAAAAAAyAGQAlgDIAPoBLAFeAZABwgH0AiYCWAKKArwC7gMgA1IDhAO2A+gEGgRMBH4EsATiBRQFRgV4BaoF3AYOBkAGcgakBtYHCAc6B2wHngfQCAIINAhmCJgIygj8CS4JYAmSCcQYwRgEGCAYkAAAAAAAAAAAAAAAAAAAAECBAUAAB1MHUwUFEABQAJhAXwCYQRiEGUQYEBiIGNAagRqAmmAagFpAWUIZQIAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAABYAQQB1AHgAaQBsAGkAYQByAHkAIAAyAAEAAAAAAAEAAAAAAAAAAAXcAGQAAQAAAAAAAAAAAAAAAAAAyAGQAlgDIAPoBLAFeAZABwgH0AiYCWAKKArwC7gMgA1IDhAO2A+gEGgRMBH4EsATiBRQFRgV4BaoF3AYOBkAGcgakBtYHCAc6B2wHngfQCAIINAhmCJgIygj8CS4JYAmSCcQYwRgEGCAYkAAAAAAAAAAAAAAAAAAAAECBAUAAB1MHUwUFEABQAJhAXwCYQRiEGUQYEBiIGNAagRqAmmAagFpAWUIZQIAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAABYAQQB1AHgAaQBsAGkAYQByAHkAIAAzAAEAAAAAAAEAAAAAAAAAAAXcAGQAAQAAAAAAAAAAAAAAAAAAyAGQAlgDIAPoBLAFeAZABwgH0AiYCWAKKArwC7gMgA1IDhAO2A+gEGgRMBH4EsATiBRQFRgV4BaoF3AYOBkAGcgakBtYHCAc6B2wHngfQCAIINAhmCJgIygj8CS4JYAmSCcQYwRgEGCAYkAAAAAAAAAAAAAAAAAAAAECBAUAAB1MHUwUFEABQAJhAXwCYQRiEGUQYEBiIGNAagRqAmmAagFpAWUIZQIAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAABYAQQB1AHgAaQBsAGkAYQByAHkAIAA0AAEAAAAAAAEAAAAAAAAAAAXcAGQAAQAAAAAAAAAAAAAAAAAAyAGQAlgDIAPoBLAFeAZABwgH0AiYCWAKKArwC7gMgA1IDhAO2A+gEGgRMBH4EsATiBRQFRgV4BaoF3AYOBkAGcgakBtYHCAc6B2wHngfQCAIINAhmCJgIygj8CS4JYAmSCcQYwRgEGCAYkAAAAAAAAAAAAAAAAAAAAECBAUAAB1MHUwUFEABQAJhAXwCYQRiEGUQYEBiIGNAagRqAmmAagFpAWUIZQIAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA==:X5C
<<< XIM APEX END COPY <<<
(https://www.bilder-upload.eu/thumb/4fe013-1542373593.jpeg) (https://www.bilder-upload.eu/bild-4fe013-1542373593.jpeg.html)
-
Things feel much different even without using any of the new features and i like it. But one issue i noticed i'll be playing fortnite and during a start of the match my wasd for movement doesn't want to respond or sometimes when jumping out of the bus.
-
Things feel much different even without using any of the new features and i like it. But one issue i noticed i'll be playing fortnite and during a start of the match my wasd for movement doesn't want to respond or sometimes when jumping out of the bus.
Yeah I had this in pubg last night. Someone posted earlier in the thread how to fix it I think.
-
OBsIV
can we get a breakdown of the Steady Aim values. Like Low vs High values. What's the impact exactly. Tried different sync's but seems like DEFAULT with a low SA value between 1 and 3 seems pretty good.
-
Testflight is asking me for a inv code, where i have to look for it?
Ready! Fixed.
65 it is a good value for Fortnite BR?
-
100-125 works best in fortnite, give it a try and let us know if you like it
-
I am utterly in LOVE with this Firmware update. I just played cod for the last 2 hours straight after hearing about this FW and I can honestly say it's the most fun I've had in COD in a long time. Aiming felt so effortless.
Using BO4 ST with G502 12kdpi 1000hz apex at 1000hz
Using Sync Off, Steady Aim at 5 and Analog Movement at 55.
Feels like I'm playing a different game, in a good way.
Can u share ur hip and ads settings?
Do u use any smoothing or boost?
-
I am utterly in LOVE with this Firmware update. I just played cod for the last 2 hours straight after hearing about this FW and I can honestly say it's the most fun I've had in COD in a long time. Aiming felt so effortless.
Using BO4 ST with G502 12kdpi 1000hz apex at 1000hz
Using Sync Off, Steady Aim at 5 and Analog Movement at 55.
Feels like I'm playing a different game, in a good way.
Can u share ur hip and ads settings?
Do u use any smoothing or boost?
I use the ADS translator only. So I have my ADS activation key set to something I don't ever use and then on hip I make sure the translator for that is using the ADS translator. I do this because I don't mind the acceleration it provides in HIP and makes it feel snappier, and the benefit of having a single translator instead of the normal HIP & ADS is that you can ignore delay setting as the game will now control that perfectly every time. Makes for much more accurate snapping. I don't recommend it for new users btw as it's not 1:1 and you now can only control one sensitivity as apposed to HIP and ADS independently.
My sens is 21. Below are my other settings. I use no curve.
(https://i.imgur.com/BKdCRH3.png)
-
I don’t see the Simulation analog behavior option I updated the firmware but it’s not in the App manager?
-
I don’t see the Simulation analog behavior option I updated the firmware but it’s not in the App manager?
You have to have the beta manager on your phone as well. Install testflight if on iOS then click on this link and follow instructions to install the beta. I chose to have it remove my old version in favor of the beta.
https://testflight.apple.com/join/1IAp7e3i (https://testflight.apple.com/join/1IAp7e3i)
Beyond that, you have to make sure you have "enable expert configuration" checked in the global settings of the xim manager to see the analog movement settings under the movement tab.
-
Dear forum,
Could someone please help me. Maybe I am doing something wrong.
I have updated my my XIM to 20181109. I upgraded the XIM using the file, but I dont have the new features in my android application. I tried to upgrade again, also tried to reinstall the application, but I dont have the new options like - simulate analog behavoir. I watched the video and did everything as it is showen, but nothing happens.And of course I have enabled the expert configuation.
What might be the problem?
here is the images - https://imgur.com/a/8eLtoJn
-
You need to read the bottom of the first post and install the ADK of the manager on your phone as well as have the new firmware.
-
Things feel much different even without using any of the new features and i like it. But one issue i noticed i'll be playing fortnite and during a start of the match my wasd for movement doesn't want to respond or sometimes when jumping out of the bus.
Change your "simulate analog behavior" under the movement tab (at the bottom after you press the three dots to expand the menu) to a value greater than 0.
-
100-125 works best in fortnite, give it a try and let us know if you like it
1) 100-125 for which setting? "simulate analog behavior" or boost or steady aim? and WHY do you say it works best?
2) Does changing the sync from common, default, slow or off affect how the three new settings behave (SAB, boost & steady aim)? IF so, does one of the sync settings work better and WHY? I'm on XBox One X with 4K HDR TV.
Thanks!
-
You need to read the bottom of the first post and install the ADK of the manager on your phone as well as have the new firmware.
thank you. now it works! :)
-
As much as I liked the new firmware I had to uninstall it and go back to the previous firmware because of the issues I was having. I have a quick question I use a G13 keypad and use the analog stick for movement already. Do I even need SImulated analog movement? And if not when I did add value to that does anybody think that maybe what was throwing off my COD game?
-
As much as I liked the new firmware I had to uninstall it and go back to the previous firmware because of the issues I was having. I have a quick question I use a G13 keypad and use the analog stick for movement already. Do I even need SImulated analog movement? And if not when I did add value to that does anybody think that maybe what was throwing off my COD game?
Yes the Simulate Analog Movement is meant for Keyboard users only. So since you are using analog on the g13 that part of this firmware is pointless to you and using it probably made things worse as far as your COD game.
However, there are still reasons like the new "boost" option and "steady aim" options re-introduced into this firmware that even g13 and sony nav users will still want. Just don't use the analog movement setting. Keep it at 0.
-
As much as I liked the new firmware I had to uninstall it and go back to the previous firmware because of the issues I was having. I have a quick question I use a G13 keypad and use the analog stick for movement already. Do I even need SImulated analog movement? And if not when I did add value to that does anybody think that maybe what was throwing off my COD game?
Thanks I appreciate the info
Yes the Simulate Analog Movement is meant for Keyboard users only. So since you are using analog on the g13 that part of this firmware is pointless to you and using it probably made things worse as far as your COD game.
However, there are still reasons like the new "boost" option and "steady aim" options re-introduced into this firmware that even g13 and sony nav users will still want. Just don't use the analog movement setting. Keep it at 0.
Thank you for the Info!
-
I ask for Boost and he provides boost.
I ask for steady aim and he provides steady aim.
Then he presents us with analog simulation just for good measure.
Obsiv you are a beautiful man.
Time to test and find out the best settings for destiny 2. With so many variables now it's hard to know where to start!
P.s. Antithesis, I'm glad you like this firmware. I've been working on the alpha team for a while now and glad you now have a chance to try it for yourself x
-
hello, still no one to explain how the values of steady aim act on our AA and our ads?
-
config copy seems broken to older versions, the kids go crazy in my BF5 generic thread.
Some answer?
Thank you
-
config copy seems broken to older versions, the kids go crazy in my BF5 generic thread.
Some answer?
Thank you
I have experienced the same. You have to redo it manually I am afraid...at least until there is some answers from OB...
-
Am I the only one who cannot get manager to download on my iPhone? It’s driving me crazy.
remove old XIM AMANAGER from your Iphone
Then install TestFlight on your phone from app store
After that you come to this forum, access this thread and on the first page click on the IOS link and it will open in the Test Flight app and you can install it. it will show up with a orange dot.
good luck
Thanks for the help but it is still not letting me install.
Says unable to join beta. The request app Is not available or does not exist
-
You are using this link?: https://testflight.apple.com/join/1IAp7e3i
-
Hey OB I sent you a personal message with a question about the latest firmware update.
-
You are using this link?: https://testflight.apple.com/join/1IAp7e3i
Yes that is the link I use.
-
can i ask if there is a ETA for mac version?
-
You are using this link?: https://testflight.apple.com/join/1IAp7e3i
Okay so I tried everything and finally got it. This is the fix..
I had xim4 beta testing still in my test flight and I had to push “stop testing” then went to the link posted and it asked if I wanted to replace it. Pushed yes and now it works!! Thanks to everyone for helping.
-
config copy seems broken to older versions, the kids go crazy in my BF5 generic thread.
Some answer?
Thank you
I have experienced the same. You have to redo it manually I am afraid...at least until there is some answers from OB...
This is a disaster, I have several games and doing it with everyone is very frustrating, we hope to receive an answer to this
-
can someone explain what steady aim does. pls, say I run 0 SA vrs 200. whats the difference?
-
The latest xim manager link for Android isn't working. Is there another source?
-
can someone explain what steady aim does. pls, say I run 0 SA vrs 200. whats the difference?
See https://community.xim.tech/index.php?topic=72268.msg726495#msg726495 (https://community.xim.tech/index.php?topic=72268.msg726495#msg726495) for an explanation. I believe Od1n is making a tutorial video.
-
I’m guessing this feature won’t be coming to the XIM4? :/
-
I’m guessing this feature won’t be coming to the XIM4? :/
No, sorry about that. XIM4 is maxed out -- there is simply no room left on it.
-
I have to say that this update is amazing! BO4 has never felt this good!! I actually played for hours. The boost plus steady aim makes my aim feel so precise. Went 111-16 today on hardpoint. The game still has connection issues but with this update I felt like my bullets were registering way better. I was about to sell my apex because it has never felt as good as my xim4 but with this update it’s even better! Well done! Thanks for listening to everyone :)
-
I dropped back to the older firmware. PUBG is my main game and anytime I started a map like the waiting area and after jumping from a plane there was like 5 seconds I could not move. I was not using any of the new features but I was planning to use them on games with aim assist.
-
I dropped back to the older firmware. PUBG is my main game and anytime I started a map like the waiting area and after jumping from a plane there was like 5 seconds I could not move. I was not using any of the new features but I was planning to use them on games with aim assist.
you just need to increase the value for Simulate Analog Behavior to greater than *0*..have you tried this?
-
I will try this later.
-
Any testing been done to determine what an acceptable analog behavior setting is in Overwatch?
-
Any testing been done to determine what an acceptable analog behavior setting is in Overwatch?
Yes you should contact mattyb98 who I believe has spent a lot of time on this.
-
I have to say that this update is amazing! BO4 has never felt this good!! I actually played for hours. The boost plus steady aim makes my aim feel so precise. Went 111-16 today on hardpoint. The game still has connection issues but with this update I felt like my bullets were registering way better. I was about to sell my apex because it has never felt as good as my xim4 but with this update it’s even better! Well done! Thanks for listening to everyone :)
mind sharing your settings? i'm stil figuring and trying new things.
my current settings and i'm happy with are default sync
3 SA
300 Boost
55 analog behavior
i'm so accurate with these settings and aim assist is a no issue for me anymore, but i can try new things
-
Any testing been done to determine what an acceptable analog behavior setting is in Overwatch?
120 works very well for me. By the way, if you are a keyboard user who plays Overwatch, you need to upgrade to this firmware asap. It finally makes apex feel good on Overwatch. I think all you Nav / G13 people should be prepared for some tough competition this season from us keyboarders.
-
so.... i did the update... but when i go into the xim app to activate these new settings, they aren't there. even after i turn on expert settings. what am i missing?
-
Same! The new setting is not there, i know my way around my Apex very well and did everything right multiple times and still nothing. Whats goin on?!
-
20181019 has much stronger more precise aim assist all i know.. prolly cause the download is broken
-
so.... i did the update... but when i go into the xim app to activate these new settings, they aren't there. even after i turn on expert settings. what am i missing?
You need to update both the Apex firmware, and the Xim Manager iOS/Android app to see the changes.
-
Would using the Generic Alpha ST on Overwatch and using the analog behavior setting give me the same results if I used 150 for both. Or would they feel different since they are different STs?
-
I have to say that this update is amazing! BO4 has never felt this good!! I actually played for hours. The boost plus steady aim makes my aim feel so precise. Went 111-16 today on hardpoint. The game still has connection issues but with this update I felt like my bullets were registering way better. I was about to sell my apex because it has never felt as good as my xim4 but with this update it’s even better! Well done! Thanks for listening to everyone :)
mind sharing your settings? i'm stil figuring and trying new things.
my current settings and i'm happy with are default sync
3 SA
300 Boost
55 analog behavior
i'm so accurate with these settings and aim assist is a no issue for me anymore, but i can try new things
Are you putting steady aim and boost on both hip and ads? Are you using any curves with this? I’m really struggling with aim assist games. I mainly play pubg but when I switch I can’t get my xim set up for the @#$% aa bubble.
-
Same! The new setting is not there, i know my way around my Apex very well and did everything right multiple times and still nothing. Whats goin on?!
Seems like your new but here to help you need to update apex manager its on 1st page of this thread
-
After 15h of gameplay with the new beta I did not see any problem.
I only play destiny 2
1000hz 3200dpi defaut and without curves. Simulate analog 200
-
I still get the warning message on fortnite with latest uppdate, I wonder can people see this message if they are spectating me?
-
I still get the warning message on fortnite with latest uppdate, I wonder can people see this message if they are spectating me?
Controller users are getting it too.
Nothing to worry about. It's Fortnite's typical teething issues when they either try or prepare for something new.
-
Polling rate seems to change sensitivity on this firmware
-
Does anyone think Stimulate Analog movement really makes a difference changing it from 0 to 1 i have really bad OCD when it comes to making sure my settings are perfect and getting the wasd issue. Any other way to fix it?
-
Polling rate seems to change sensitivity on this firmware
If Sync is set to Off, then yes, it does. It always has as sens is tied to response rate with Sync Off.
If Sync is set to any other value and that value doesn't change (e.g leave Sync at Common, change response rate from 1000Hz to 500Hz), then response rate shouldn't affect sensitivity as its values are normalised.
I haven't tested this though on the new FW, so it's worth checking.
-
Polling rate seems to change sensitivity on this firmware
If Sync is set to Off, then yes, it does. It always has as sens is tied to response rate with Sync Off.
If Sync is set to any other value and that value doesn't change (e.g leave Sync at Common, change response rate from 1000Hz to 500Hz), then response rate shouldn't affect sensitivity as its values are normalised.
I haven't tested this though on the new FW, so it's worth checking.
I believe you are right bc I was using sync off
-
I have to say that this update is amazing! BO4 has never felt this good!! I actually played for hours. The boost plus steady aim makes my aim feel so precise. Went 111-16 today on hardpoint. The game still has connection issues but with this update I felt like my bullets were registering way better. I was about to sell my apex because it has never felt as good as my xim4 but with this update it’s even better! Well done! Thanks for listening to everyone :)
mind sharing your settings? i'm stil figuring and trying new things.
my current settings and i'm happy with are default sync
3 SA
300 Boost
55 analog behavior
i'm so accurate with these settings and aim assist is a no issue for me anymore, but i can try new things
Are you putting steady aim and boost on both hip and ads? Are you using any curves with this? I’m really struggling with aim assist games. I mainly play pubg but when I switch I can’t get my xim set up for the @#$% aa bubble.
i use it for both hip and ads, and no curves, and i use bo4 st
dpi 12k
polling rate 500hz
sync default
Steady aim 3.0 and 3.5 for ads
boost 300 for hip, and 350 for ads
55 simulate analog behavior
the aim assis is there but it's snappier than ever, i can break it easily while take advantage of it to snap on targets
-
looking forward to trying it when the PC manager is out as i could never get my phone to connect to my xim
-
Any idea on the eta for Mac? I apologize if this has already been answered. Really want to test out the firmware, thanks again guys!
-
Great firmware, I'm in love with it, but I have a small issue with new simulate analog behavior feature.
When playing BO4 MP or Blackout my character sometimes just cancel sprint, so I need to press SHIFT once again.
My settings for HIP and ADS are:
55 simulate analog behavior
5 steady aim
sync off
Tried with another keyboard - same issue.
I must try to lower SAB value or raise it?
-
Great firmware, I'm in love with it, but I have a small issue with new simulate analog behavior feature.
When playing BO4 MP or Blackout my character sometimes just cancel sprint, so I need to press SHIFT once again.
My settings for HIP and ADS are:
55 simulate analog behavior
5 steady aim
sync off
Tried with another keyboard - same issue.
I must try to lower SAB value or raise it?
lower it, try 50 and try, if it still happens lower it to 45 and try...etc
-
Love the New Firmware. Aiming on Fortnite feels so much better. My settings so far as im waiting on a video for Steady Aim and boost.
Logitech G Pro Hero Wired
1000hz
23 Hip
Common
13.50 ADS
Common
100 SAB
-
I have to say that this update is amazing! BO4 has never felt this good!! I actually played for hours. The boost plus steady aim makes my aim feel so precise. Went 111-16 today on hardpoint. The game still has connection issues but with this update I felt like my bullets were registering way better. I was about to sell my apex because it has never felt as good as my xim4 but with this update it’s even better! Well done! Thanks for listening to everyone :)
mind sharing your settings? i'm stil figuring and trying new things.
my current settings and i'm happy with are default sync
3 SA
300 Boost
55 analog behavior
i'm so accurate with these settings and aim assist is a no issue for me anymore, but i can try new things
Hi I play on 12000 dpi
500hz
I use 9 steady aim and 70 boost on ads
7 steady aim and 70 boost for hip
Analog I am not changing
To be honest I don’t even know if these settings make sense but they feel so amazing to me.
-
I have to say that this update is amazing! BO4 has never felt this good!! I actually played for hours. The boost plus steady aim makes my aim feel so precise. Went 111-16 today on hardpoint. The game still has connection issues but with this update I felt like my bullets were registering way better. I was about to sell my apex because it has never felt as good as my xim4 but with this update it’s even better! Well done! Thanks for listening to everyone :)
mind sharing your settings? i'm stil figuring and trying new things.
my current settings and i'm happy with are default sync
3 SA
300 Boost
55 analog behavior
i'm so accurate with these settings and aim assist is a no issue for me anymore, but i can try new things
Are you putting steady aim and boost on both hip and ads? Are you using any curves with this? I’m really struggling with aim assist games. I mainly play pubg but when I switch I can’t get my xim set up for the @#$% aa bubble.
Steady aim on both. 9 ads and 7 hip. 70 boost for both
-
Forgot to mention I always use common sync. Cheers
-
Mac firmware tool is now available.
-
lower it, try 50 and try, if it still happens lower it to 45 and try...etc
Thanks. No problems at all with 50 value.
-
Mac firmware tool is now available.
When will the manager be available for pc download?
-
this is the best firmware we have had so far!
Simulate Analog Behaviour reduces the amount of issues with the aim assist to a minimum! :)
i can only recommend everyone to give this new version a try!
Sir! Looking forward for a video that explains what these new settings do and how to use them properly :)
yep need a video please!!!
@OBsIV & xim team great work once again!!!!
-
I still get the warning message on fortnite with latest uppdate, I wonder can people see this message if they are spectating me?
Controller users are getting it too.
Nothing to worry about. It's Fortnite's typical teething issues when they either try or prepare for something new.
I had this playing on my note 9 lol.
-
should we being using sync off with smoothing + SA /or/ default + SA with no smoothing
-
Cod is one of the biggest games in the planet right now how has no one other than myself and one other person not tried the analog value option in BO4 and not noticed that ADS bug????? Lol
i set it to 25 and i do not notice anything except more AA. your trippin.
-
should we being using sync off with smoothing + SA /or/ default + SA with no smoothing
I have been using default with 5 SA. No smoothing. Going to add a little boost and see how that works.
-
should we being using sync off with smoothing + SA /or/ default + SA with no smoothing
FYI thanks to anthitesis
Less AA - Sync Off, Boost, Steady Aim, acceleration Ballistics Curves
More AA - Sync Default > Common > Slow, Smoothing, Sim Analog Behaviour, deceleration Ballistics Curves
-
Mac firmware tool is now available.
Can you fix the wasd issue on spawn when SA is set to 0
-
I cant get the redeem code email sent to my dang email for test flight! Any suggestions!!? why is this so hard ugh
-
First I’d like to say thank you for putting in your time to consistently improve an already great product.
My question is would this new firmware present anything viable for a game like Pubg? I have seen others ask the question but it seems the only answers being given are for games like fortnight and BO4. I am assuming then that these games that have aim assist are the ones that this firmware is targeting.
If anyone could please write a small explaination as to what would be a good way to use these new features for Pubg or other games without AA that would be greatly appreciated.
-
I Agree!! Thx to the Devs. Excellent work!
Bro. Test it all out and make it work for you!!!
Cheers!
-
this is the best firmware we have had so far!
Simulate Analog Behaviour reduces the amount of issues with the aim assist to a minimum! :)
i can only recommend everyone to give this new version a try!
Yeah, and after rereading that post I had to do it and updated. Now let’s see what I can do with it.
-
Will there be a video guide on these settings? I am not sure whether I need to use these settings to optimize control in the coming BF5. If anybody has specific tips regarding expert config. settings specifically for BF5, I look forward to listening.
-
Theres an option in cod4 for aim assist do I enable it or unclick???? Xbox one
-
Theres an option in cod4 for aim assist do I enable it or unclick???? Xbox one
I haven't tried this firmware yet on cod4 remastered but i would leave it on helps with the drag shot when quick scoping
-
Things feel much different even without using any of the new features and i like it. But one issue i noticed i'll be playing fortnite and during a start of the match my wasd for movement doesn't want to respond or sometimes when jumping out of the bus.
Yeah I had this in pubg last night. Someone posted earlier in the thread how to fix it I think.
Its because you dont have Simulate Analog Behavior on. The minute you change the value from 0 (off) to 50 or 100, it will fix itself. I had the same issue
The only thing i cant figure out is, what is the difference between 50 and 100 SAB. The higher you go, the less Aim Assist you have? I watched the vid and it said dont go above 125 for fortnite
-
Things feel much different even without using any of the new features and i like it. But one issue i noticed i'll be playing fortnite and during a start of the match my wasd for movement doesn't want to respond or sometimes when jumping out of the bus.
Yeah I had this in pubg last night. Someone posted earlier in the thread how to fix it I think.
Its because you dont have Simulate Analog Behavior on. The minute you change the value from 0 (off) to 50 or 100, it will fix itself. I had the same issue
The only thing i cant figure out is, what is the difference between 50 and 100 SAB. The higher you go, the less Aim Assist you have? I watched the vid and it said dont go above 125 for fortnite
Yah i'm aware of that now. I went back to the official firmware until this get's fixed. Honestly i perfer more aim assist. Just mainly because i am used to it now.
-
The only thing i cant figure out is, what is the difference between 50 and 100 SAB. The higher you go, the less Aim Assist you have?
The higher you go, the more analog-like your WASD movement. Don't confuse this with an AA increasing button.
It's also the opposite - the higher you go, the more AA you get, to a point. It also assumes that the game you're playing supports left-stick rotational AA. But, the cost is unpredictable movement (slight drift) and slower strafe speed.
-
I dropped back to the older firmware. PUBG is my main game and anytime I started a map like the waiting area and after jumping from a plane there was like 5 seconds I could not move. I was not using any of the new features but I was planning to use them on games with aim assist.
In PUBG I noticed the issue too at 0 SAB. I since played it on 40, 50, and 60 SAB and have not noticed this issue again. Also no negative reticle pull so these values seem to be good. The only thing I do feel is better movement as I run and move around. I used to have more issues stopping suddenly on the old firmware when doing the same movements. Could be placebo but I like it.
-
Mac firmware tool is now available.
When will the manager be available for pc download?
-
Mac firmware tool is now available.
When will the manager be available for pc download?
I'm sorry, I'm going to need more time on that since building an install package isn't a fast thing. But, I'm curious how this will really help here. These new settings require a lot of adjustment at runtime while you are in-game. Since PC is offline configuration, you won't be able to do that. Or, are you using Commander?
-
Please read down below...
Clan HLD-Jump Loot Die
för 2 timmar sedan
Anyone who can help with invite code from testflight! This totly not working without it -.-
XIMGameplay
XIMGameplay
för 2 timmar sedan
Here you have an invitational link, follow the steps and youll get an invite via your apple id mail. You can then download the manager through the apple testflight app. Link: https://testflight.apple.com/join/1IAp7e3i
Clan HLD-Jump Loot Die
Clan HLD-Jump Loot Die
för 2 timmar sedan
@XIMGameplay Ive been waiting for the code for almost 2days -:(
XIMGameplay
XIMGameplay
för 1 timme sedan
@Clan HLD-Jump Loot Die Its being sent to your apple email, maybe check your spam folder? Also verify if you checked the correct email adress. You could also just download testflight and check if the app is already in there, maybe your apple settings have an auto approval and therefore no confirmation email is necessary.
Clan HLD-Jump Loot Die
Clan HLD-Jump Loot Die
för 26 minuter sedan
XIMGameplay i have the TestFlight app, the problem is that, what should i do next? Now it ask for a code invate code that i wont Recive in any box, trash, inbox so on
XIMGameplay
XIMGameplay
för 16 minuter sedan
@Clan HLD-Jump Loot Die Hey, id recommend you to write in the following xim topic so obsiv who is managing the testflight can check out your problem, maybe something went wrong! https://community.xim.tech/index.php?topic=72146.0
-
I'm sorry, I'm going to need more time on that since building an install package isn't a fast thing. But, I'm curious how this will really help here. These new settings require a lot of adjustment at runtime while you are in-game. Since PC is offline configuration, you won't be able to do that. Or, are you using Commander?
Hey. That's totally understandable I was just interested in playing around with the new settings. I have a older smartphone which can't download the manager which is why i use my pc to use the xim managers. I just unplug from from my pc to console and change the settings that way. I know it's not the most efficient way of doing things but I don't have the spare money for a decent smartphone. Thank you for the reply.
-
The only thing i cant figure out is, what is the difference between 50 and 100 SAB. The higher you go, the less Aim Assist you have?
The higher you go, the more analog-like your WASD movement. Don't confuse this with an AA increasing button.
It's also the opposite - the higher you go, the more AA you get, to a point. It also assumes that the game you're playing supports left-stick rotational AA. But, the cost is unpredictable movement (slight drift) and slower strafe speed.
Hi antithesis, thank you for responding. According to the SAB vid, it said that anything greater than 125 would start to give you the drift, so if i bump it back up to 100 from 50, are you saying that i would still feel the effects of drift?
I kinda get what your saying, or please correct me if my interpretation is wrong, increasing SAB is not a "Increase Aim Assist," but it more makes the game think you are using an analog controller; therefore, increasing Aim Assist slightly since AA was designed more for the analog movement?
I currently play fortnite :)
Another silly question, ive seen folks comment that they like the Retail Build or Vanilla Build, what does that mean? Are they referring to the 2018501 build?
-
Mac firmware tool is now available.
When will the manager be available for pc download?
I'm sorry, I'm going to need more time on that since building an install package isn't a fast thing. But, I'm curious how this will really help here. These new settings require a lot of adjustment at runtime while you are in-game. Since PC is offline configuration, you won't be able to do that. Or, are you using Commander?
Always need to have a PC manager. Sure the phone apps are great for in game tweaking but actual config setups are better done on PC. Actual management of all your setups is better done on PC.
-
Hmmm cant download the xim Manager on my note 9 phone click the link page goes down the the button right nothing happens ??? Gonna restart phone try again
-
Got it to work
-
Any good setups for Overwatch?
I can't really figure out if Analog is helping much.
As a whole, trying to figure out what they all do in conjunction together is a bit challenging.
It's almost as if there's too many settings that can be put into play to determine their individual impact on a config.
I guess a better explanation video for these new settings will help when it's developed, but I messed around with the values all day and felt very little difference.
-
Can I convert codes made before the latest beta into code for the latest beta?
An error occurred when pasting the previous code.
-
IMPORTANT: This Beta requires you upgrade both firmware and Manager in order to access the new features. Please use the links below.
This is a BETA firmware build that, based on community request, brings in the Boost setting and Steady Aim experimental test feature from XIM4. It also includes a new feature for keyboard users: Simulate Analog Behavior. These are advanced features that should be used with caution as they can negatively affect aiming performance if not used correctly.
● Steady Aim: Unlike Smoothing which produces uniform mouse stabilization, Steady Aim forcibly restricts mouse movement into discrete values. Higher values produce a stronger effect. Located under Aim expert settings.
● Boost: Boost artificially inflates the game's aiming stick dead zone. Be advised that values too large will significantly degrade micro-aiming performance. Located under Mouse expert settings.
● Simulate Analog Behavior: For keyboard users, outputs controller values similar to that of the gamer using a thumbstick. Higher values produce a stronger effect. Located under Movement expert settings.
XIM APEX Firmware
Download XIM APEX Firmware Tool 20181109 for PC (http://cloud.xim.tech/Beta/XIMAPEXFlash-20181109-PC.exe)
Windows 7/8/8.1/10 x86/x64
Download XIM APEX Firmware Tool 20181109 for Mac (http://cloud.xim.tech/Beta/XIMAPEXFlash-20181109-Mac.zip)
macOS 10.11 or higher
Flash Upgrade Instructions (instructional video (https://youtu.be/fYlwNXl-ZGw)):
1. Hold down the button on your XIM APEX
2. Plug your XIM APEX into your computer while continuing to hold the button
3. Wait for your XIM APEX's light to display blue and then release the button
4. Download and run the XIMAPEXFlash tool
5. Select Update Firmware
6. Disconnect your XIM APEX from your computer after the tool completes
XIM APEX Manager
Download XIM APEX Manager 20181109 for iOS (https://testflight.apple.com/join/1IAp7e3i) (← Join our TestFlight by clicking the link)
iOS 8 or higher
Download XIM APEX Manager 20181109 for Android (http://cloud.xim.tech/Beta/XIMAPEXManager-20181109-Android.apk) (Direct APK Download)
Android 4.4 or higher
This manager doesn't work with the OnePlus 6t or at least it doesn't for me neither does it for the OnePlus 3t which I had before I upgraded to the OnePlus 6t. The error I get is 'Bluetooth failure (6)' Is there a guide of how to use and connect to a Bluetooth dongle on pc it never seems to pair with the Bluetooth adapter. Is there a manager 20181109 coming out for pc
-
Hi,
I downloaded the Testflight app yesterday and now im wondering where I can get that Redeem code to get this app working? I havent recieved any email from the developer.
Thank you already!
-
Any reports of XIM Apex Manager crashing with new firmware? Can't see to open the App most of time and when it does, it just crashes upon saving settings or configs. I updated Firmware on the Manager and on the Xim Apex and confirmed they're the same. Going to try factory resetting and hope that works.
edit: factory resetting did work for anybody having same issue. things are running smooth now. excited to try out new features. cheers and thanks for the hard work devs, much appreciated!
-
This manager doesn't work with the OnePlus 6t or at least it doesn't for me neither does it for the OnePlus 3t which I had before I upgraded to the OnePlus 6t. The error I get is 'Bluetooth failure (6)' Is there a guide of how to use and connect to a Bluetooth dongle on pc it never seems to pair with the Bluetooth adapter. Is there a manager 20181109 coming out for pc
OnePlus 6T is my personal primary phone and I do all developing and testing of XIM Manager on it. Can you try rebooting your phone?
-
Thanks, updated to this version from 20180501 and everything is working well.
Have not tried the new features yet.
-
Any good setups for Overwatch?
I can't really figure out if Analog is helping much.
As a whole, trying to figure out what they all do in conjunction together is a bit challenging.
It's almost as if there's too many settings that can be put into play to determine their individual impact on a config.
I guess a better explanation video for these new settings will help when it's developed, but I messed around with the values all day and felt very little difference.
I use 120 SAB in Overwatch but I am using one of the Generic STs. You could try 120 and it might be similar in Overwatch. Unsure if an SAB translates well between a Generic ST and an official ST. Maybe OBsIV or mist will be able to chime in.
-
What is the best steady aim value for Black ops 4? Which settings is the same like xim4 steady aim 1?
-
I've updated to the latest versions of manager and firmware (confirmed) but I still don't see this new feature anywhere. Can someone tell me what I'm doing wrong or why? I've re-downloaded the games and even tried creating a new profile and don't see this new feature under movement.
-
Finally got it working after multiple resets and reinstalls. No idea why it finally worked but I'll take it.
Scratch that - it's completely unusable now. I got the option to display while the XIM wasn't connected to the console. Now nothing works at all. No lights on the USB dongle so no power to my KB&M. I've got an iPhone 8 on current OS so this makes no sense. The app freezes constantly as well when I attempt to do anything. I don't know what everyone else is using for their XIM manager app, but I've been sitting here for hours trying to get it to work and it won't. Lesson learned to stay away from anything XIM beta.
-
Lesson learned to stay away from anything XIM beta.
I'm sorry to hear you are having issues, but, nothing changed in any of the code paths that involve Manager connection and communication.
Do you have anything else connected over Bluetooth to your phone at the same time?
-
Lesson learned to stay away from anything XIM beta.
I'm sorry to hear you are having issues, but, nothing changed in any of the code paths that involve Manager connection and communication.
Do you have anything else connected over Bluetooth to your phone at the same time?
Do I have to delete my old xim apex config for fortnite or just update Manager then be done ??
-
Lesson learned to stay away from anything XIM beta.
I'm sorry to hear you are having issues, but, nothing changed in any of the code paths that involve Manager connection and communication.
Do you have anything else connected over Bluetooth to your phone at the same time?
Do I have to delete my old xim apex config for fortnite or just update Manager then be done ??
Should carry over atleast for me it did.
-
Will the version that gets pushed to stable be different than this beta version? Or will we not have to download it.
-
Hey Obi can you make an updated Beta version that has like the Simulate Analog Behavior settings to around 50? Whats the latest 20181019 beta Simulate Analog Behavior set at? For those who cant get into the Test-flight APP Beta testing thing. :/ That would be 5star service, and would be great to hold those over until the Xim App gets updated out of the Beta stage and used by everyone.
-
1019 had it at 100. Testflight is open to everyone. All you need to do is click the link -- over 500 of you have used it.
-
I am having issues with the new manager. I flashed the xim to 20181109, but on my android phone, after I downloaded and updated the manager app ( I did it 5 times, same result), when I go to check the manager version, it shows 20181019, instead of 20181109.....?
Also, what does " What color is black" mean ?
-
Any word on the tutorial videos for SA and BOOST? Last ETA was Saturday but I don't see anything in the threads
-
Any word on the tutorial videos for SA and BOOST? Last ETA was Saturday but I don't see anything in the threads
Boost and Simulate Analog are done - https://www.youtube.com/channel/UCJQZlZVwbWQNvgCXK3gCPrA
-
Firmware vsrsion: 50020181019
Manager version: 500201811109
Expert mode on
I cant find new options.How fix that? Samsung galaxy s7
-
Any word on the tutorial videos for SA and BOOST? Last ETA was Saturday but I don't see anything in the threads
Boost and Simulate Analog are done - https://www.youtube.com/channel/UCJQZlZVwbWQNvgCXK3gCPrA
I'm using the Logitech 502 but I do not know what to do with the settings to update the new What do you recommend Boost & steady Aim?
-
Any word on the tutorial videos for SA and BOOST? Last ETA was Saturday but I don't see anything in the threads
Boost and Simulate Analog are done - https://www.youtube.com/channel/UCJQZlZVwbWQNvgCXK3gCPrA
The text link about boost tutorial is wrong!!
please!
-
Any word on the tutorial videos for SA and BOOST? Last ETA was Saturday but I don't see anything in the threads
Boost and Simulate Analog are done - https://www.youtube.com/channel/UCJQZlZVwbWQNvgCXK3gCPrA (https://www.youtube.com/channel/UCJQZlZVwbWQNvgCXK3gCPrA)
The text link about boost tutorial is wrong!!
please!
What's wrong? That links straight to the XimGameplay YouTube channel. The first video listed there is for Boost.
-
Any word on the tutorial videos for SA and BOOST? Last ETA was Saturday but I don't see anything in the threads
Boost and Simulate Analog are done - https://www.youtube.com/channel/UCJQZlZVwbWQNvgCXK3gCPrA (https://www.youtube.com/channel/UCJQZlZVwbWQNvgCXK3gCPrA)
The text link about boost tutorial is wrong!!
please!
What's wrong? That links straight to the XimGameplay YouTube channel. The first video listed there is for Boost.
Link English Text of boost video is not mention boost.
https://pastebin.com/dckWpZ9p
-
So you're saying the link to the text version on Pastebin for the Boost video is wrong? Gotcha. We'll need to let Od1n know.
Thanks for the heads up!
-
yeah sorry i didnt change the link, i updated the video description so the link should be correct now
here it is: https://pastebin.com/W06wgHLU
-
Firmware vsrsion: 50020181019
Manager version: 500201811109
Expert mode on
I cant find new options.How fix that? Samsung galaxy s7
You have to download the forward from nov 9, you haven't updated your apex yet. The link is on page one of this thread.
-
i can't update the manager ? I'm running on ISO 12.1 and it is not showing any available updates.
-
Hey Obi can you make an updated Beta version that has like the Simulate Analog Behavior settings to around 50? Whats the latest 20181019 beta Simulate Analog Behavior set at? For those who cant get into the Test-flight APP Beta testing thing. :/ That would be 5star service, and would be great to hold those over until the Xim App gets updated out of the Beta stage and used by everyone.
The SAB is a setting you can adjust within the manager, so it can be set to 0, 50, 75, 100 etc and also in smaller increments
-
If i dont use SAB, Steady AIM or Boost for fornite, are firmwares v20180501 and v20181109 the same then? the only difference being that 20181109 has the movement fix for fornite kb/m detection?
And i didnt see an answer to my previous question but when i see folks saying retail or vanilla version, are they referring to firmware 20180501?
-
This firmware is fantastic. I love the Steady Aim feature and Boost is back!!! An old guy feeling like a young kid again!!! Thank you!
-
Fortnite issues:
I have basically no aim assist at all!
Settings:
4K dpi
1000hz
15 hip
No ads profile
3 Steady Aim
Default sync
0 boost
120 simulate analog movement
Prior to this I had same settings except for retail version and it felt so much better?!???
Movement also felt much quicker and less clunky in retail. Or am I alone?
-
Good afternoon, someone has managed to make an optimal configuration of the battelfield V with this new firware, a greeting thank you.
-
Could we get a config code with the new settings included for BO4/Blackout?
-
I’ve been trying to figure out some decent settings for Destiny 2 using the new features of this beta build (steady aim, boost, etc.). So far, no luck. Anyone have any recommended settings to start with?
-
any help please i've downloaded the best firmware and manager the firmware goes in fine and shows the correct 5.00.20181109 but the manager is'nt having any of it it does show the same numbers but the none of the new features are showing up i've enable expert mode as instructed and watch the utube video time and time again i am getting no where also theres no manager for pc only andoid wha is this when i download it its shows as an apk file which i have no clue what to do with any helps please.
-
any help please i've downloaded the best firmware and manager the firmware goes in fine and shows the correct 5.00.20181109 but the manager is'nt having any of it it does show the same numbers but the none of the new features are showing up i've enable expert mode as instructed and watch the utube video time and time again i am getting no where also theres no manager for pc only andoid wha is this when i download it its shows as an apk file which i have no clue what to do with any helps please.
Manager for PC is coming soon from what we have been told.
-
yeah im super keen for it to! heard great things from my mates about this update i neeed it :p
-
any help please i've downloaded the best firmware and manager the firmware goes in fine and shows the correct 5.00.20181109 but the manager is'nt having any of it it does show the same numbers but the none of the new features are showing up i've enable expert mode as instructed and watch the utube video time and time again i am getting no where also theres no manager for pc only andoid wha is this when i download it its shows as an apk file which i have no clue what to do with any helps please.
Manager for PC is coming soon from what we have been told.
thanks man appreciate the feed back i'll hang on as im doing pretty good anyway
-
Wow, this is so far the best update. App keeps crashing from time to time android(galaxy s8 plus), but all new features are awsom . Steady aim brilliant
-
How do I delete the contents of android to be able to install the new version. Its because i have the new version but i do not have the new options because i stayed with things old version.You should have implement an option within the application to be able to do UPDATE instead to bee installing APK all the time.
-
Playing R6s before update had 2-3 kills, after update 16 kills nice ! Sometimes I feel then u aim down sight a bit laggy. Another problem I have then I connect titan2 and then I press qckuikly Ads it's starts shooting never had this before. I will try to play a bit more with settings and will see if I can sort this out
-
can someone explain what steady aim does. pls, say I run 0 SA vrs 200. whats the difference?
Try it and see :-)
-
Anyone else having the following issues after updating firmware/manager:
1) problems when starting ps4: can´t use kb/m without removing them from the apex and pluggin back.
2) while playing fortnite: suddenly kb/m stops working, have to do the same thing than when starting the ps4.
-
can someone explain what steady aim does. pls, say I run 0 SA vrs 200. whats the difference?
Try it and see :-)
-
Will there be a XIM APEX Manager 20181109 for PC?
-
can someone explain what steady aim does. pls, say I run 0 SA vrs 200. whats the difference?
Try it and see :-)
He asked about Steady Aim not Boost. The Steady Aim video is coming soon
-
This is fantastic, the amount of tweaking is useful and functional. but also, you folks, dont forget that just because you can tweak more doesnt mean you always should or need to. that being said, i cant think of how this could be improved, truly impressive work here. ive only tried this with destiny 2, but it can be a difficult game to work with, but ive enjoyed the tinkering. thank you for doing this.
-
dont forget that just because you can tweak more doesnt mean you always should or need to.
Yes, as I always say, this. ^
-
PC Manager is now available.
-
PC Manager is now available.
Thank you OBsIV <3
-
PC Manager is now available.
How long do you think until these features are available in the retail firmware? I’d like to be able to use the feature to simulate analog behavior but I am always lenient on doing betas.
-
PC Manager is now available.
Thank you sir
-
PC Manager is now available.
How long do you think until these features are available in the retail firmware? I’d like to be able to use the feature to simulate analog behavior but I am always lenient on doing betas.
Our Betas are really stable. It's in Beta just to get feedback on the features themselves, not for their stability.
-
PC Manager is now available.
Sorry for the dumb question,but what is PC Manager?
-
Any idea when u release this on main build?
-
Sorry for the dumb question,but what is PC Manager?
It’s like the smartphone app we use to adjust our settings (sensitivity, keybinds, etc) but for the PC.
-
Our Betas are really stable. It's in Beta just to get feedback on the features themselves, not for their stability.
Ok so I went ahead and downloaded the Beta firmware and tried out the new Simulate Analog Behavior feature and I think it tremendously helps with games that have aim assist. I didn’t realize that the bad aim assist was being caused by my keyboard. I thought it was just the game that had bad aim assist. Once I enabled the SAB setting and put the value to 55 (for Black Ops 4) it was a night and day difference. The SAB setting should most definitely be added to the retail firmware of the XIM Apex.
-
The SAB setting should most definitely be added to the retail firmware of the XIM Apex.
Thanks for your feedback. :)
-
why is it so hard to get the app on my phone:(((((((
i try to send the file with mail/discord/telegram/pc/phone itself and its just impossible to get the manager app:(
-
Our Betas are really stable. It's in Beta just to get feedback on the features themselves, not for their stability.
Ok so I went ahead and downloaded the Beta firmware and tried out the new Simulate Analog Behavior feature and I think it tremendously helps with games that have aim assist. I didn’t realize that the bad aim assist was being caused by my keyboard. I thought it was just the game that had bad aim assist. Once I enabled the SAB setting and put the value to 55 (for Black Ops 4) it was a night and day difference. The SAB setting should most definitely be added to the retail firmware of the XIM Apex.
To be honest, I feel like SAB is the best improvement that I've seen to Xim since I started using the product. If you use a keyboard in Overwatch, this update makes aim assist so much easier to navigate, particularly on characters that move while aiming and shooting. So much more of a difference on McCree and soldier than on widow, for example. Personally, this update made Ashe playable for me.
-
why can i dow load the pc version on my phone but not the android version? i want ir so bad:(
-
why can i dow load the pc version on my phone but not the android version? i want ir so bad:(
You just tap the link, it'll download to your phone and then you tell your phone it's ok to install APKs directly. There are videos about showing how to do this online.
-
The Steady Aim tutorial is now out too :)
https://community.xim.tech/index.php?topic=72603.0
-
So does anyone know which SA value corresponds to SA3 on xim4? That's what I use for D2 (went back to xim4), but would like to give apex another shot with this new firmware. Thanks.
-
PC Manager is now available.
well well well i was already happy with the apex this has surpassed itself once again i LOVE this new update i set my SAB to 30 and feels so nice i tried testing many values and i even had a friend help me with adjustment via me strafeing on him seeing how it affects and changes the feel of aim assist and strafeing speed ive found my value thanks again man serious i dont know how you do it but much respect kick back relax and have a can mate well done
-
So I update the firmware and app manger. After I did that I went to test it out in black ops 4 and it didn't feel right to me. I looked around in the app and notice some curves on my hip and ADS, I don't remember setting up any curves for this game. I don't use any curves in any of my configs for games, only for the glided in Black Out. It through me off really bad because I started to think, did I set up some curves. I really couldn't remember, I've been playing this game since it came out with my xim and I've only just now gotten back on from taking a week off from playing. I rewatched the XIMGameplay tutorial on Black Ops and he doesn't put any curves on his hip or ads, that is where I got my config for this game from. So I'm still wondering why they showed up once I updated or where I could have gotten them from, if I did put them in before the update. It's just really strange to me, it's making me feel like I'm crazy.
-
I'm having a problem installing the new manager from the android download link to my Samsung S9. When I try to open the file I get the error message "Unable to open file. You don't have any apps that can open this type of file. You can search for one on Play Store." Does anyone have a solution for this?
-
I'm having a problem installing the new manager from the android download link to my Samsung S9. When I try to open the file I get the error message "Unable to open file. You don't have any apps that can open this type of file. You can search for one on Play Store." Does anyone have a solution for this?
Problem solved. I restarted my phone and this time when I tried to open the phone it finally gave me the option to "install from unknown sources" and I was able to install the new manager. Can't wait to try out the new BFV settings!
-
To start off, thanks for being a reliable source to an alternative sense of gameplay to us that choose not to play with controllers, I love the XIM and haven't had any negative experiences myself since day 1. So considering that Rb6 doesn't have aim assist will these features produce any benefits? Just curious
-
To start off, thanks for being a reliable source to an alternative sense of gameplay to us that choose not to play with controllers, I love the XIM and haven't had any negative experiences myself since day 1. So considering that Rb6 doesn't have aim assist will these features produce any benefits? Just curious
I can say for sure you won’t experience any benefits from the “Simulate Analog Behavior” feature. I’m pretty sure all of these new settings are just to make Aim Assist feel better. It does a good job at that but won’t do anything for games without aim assist.
-
I HAVE THE SAME PROBLEM AS THE SMOKE XIM PLAYER IT SHOLUDNT BE THAT COMPILCATED
-
To start off, thanks for being a reliable source to an alternative sense of gameplay to us that choose not to play with controllers, I love the XIM and haven't had any negative experiences myself since day 1. So considering that Rb6 doesn't have aim assist will these features produce any benefits? Just curious
No but boost helps the broken turn speed not by much but enough to at least have a faster left to right.
-
Wait activation testflight
-
Wait activation testflight
There should be no waiting. The link included should automatically add you.
-
I cant get it because the Bluetooth of my k laptop is not working and the only way I can get it is through my Phone and it's not an iphone so for Android....
-
i still do all these steps, and when i open my manager on my phone, i still dont see the boost or non of the rest. what else can i do?
-
i still do all these steps, and when i open my manager on my phone, i still dont see the boost or non of the rest. what else can i do?
Can you please go to About and tell us what you see for both your firmware and Manager versions?
-
Testflight only works for IPhone or that's what I understood.
I clicked on the link for Android at the begining it looked like it was going to open but it did nothing eventually...
If U have to download an app apk direct I really tried everey thing I could. Sry but I don't understand why U have to take so many steps only for download the latest xim manager
Sry for my English I hope I made myself understood.
-
I got a new notification -41 minutes ago- for a new xim manager available in testflight...5.00.20181109
Any updates on what the new version of xim manager brings?
-
I got a new notification -41 minutes ago- for a new xim manager available in testflight...5.00.20181109
Any updates on what the new version of xim manager brings?
+1
-
I updtade my xim... Donwloaded the app Manager...
The version is actual but the firmware don t change... Someone can help me pls?
Manage Version 5.00.20181109
Firmware Version 5.00.20180501
I have a Zenfone 4.
-
Welcome to the community. You will need to update XIM's firmware on a PC or Mac using the link on the first page of this thread. Instructions are shown near the download link.
-
I got a new notification -41 minutes ago- for a new xim manager available in testflight...5.00.20181109
Any updates on what the new version of xim manager brings?
You shouldn't have, I have no idea why -- this is the same build that we released 20 days ago. TestFlight is really a terrible system and I really wish Apple would just drop it, but, of course they won't.
-
Welcome to the community. You will need to update XIM's firmware on a PC or Mac using the link on the first page of this thread. Instructions are shown near the download link.
Thanks Mist4fun.... I really did the update xim firmware on a pc. But still doenst work....
And im sorry to my bad english.
-
RomanoBra, the firmware version you have shared is the latest non-beta build. You will need the beta firmware located on the first page of this thread. Here are direct links.
PC: http://cloud.xim.tech/Beta/XIMAPEXFlash-20181109-PC.exe
Mac: http://cloud.xim.tech/Beta/XIMAPEXFlash-20181109-Mac.zip
-
Manager: 5.00.20180528
Firmware: 5.00.20181109
-
Im sorry to say this guys but i need to uninstall this update. I installed both firmware and manager and when i went into battlefield 5 on ps4 i cannot move the mouse in a straight line anymore. I move the mouse straight across the pad and it makes my guy turn in a downward spiral. After 180 degree turn i am looking straight down at the ground. Previous versions were fine i dont know if im the only one but now im nervous to even update when this version becomes official because this is actually unusable.
-
Manager: 5.00.20180528
Firmware: 5.00.20181109
I believe you have the wrong manager
-
LOVE THE NEW UPDATE
SA is an amazing feature, seriously insane how helpful. I DO notice however when xhanging the SA levels, let’s say I have 8.0 on ADS, it’s fine, but maybe a slightly higher number like 9.0, the sensitivity goes bananas, super fast. But 10.0 will be back to normal. It seems a few numbers will trip everything out. Not consistently in screaming in SA intensity if that makes sense. Any idea?
-
I got a new notification -41 minutes ago- for a new xim manager available in testflight...5.00.20181109
Any updates on what the new version of xim manager brings?
You shouldn't have, I have no idea why -- this is the same build that we released 20 days ago. TestFlight is really a terrible system and I really wish Apple would just drop it, but, of course they won't.
Understood , alright then I will not update it and continue with what I have.
Thanks for the reply.
-
Im sorry to say this guys but i need to uninstall this update. I installed both firmware and manager and when i went into battlefield 5 on ps4 i cannot move the mouse in a straight line anymore. I move the mouse straight across the pad and it makes my guy turn in a downward spiral. After 180 degree turn i am looking straight down at the ground. Previous versions were fine i dont know if im the only one but now im nervous to even update when this version becomes official because this is actually unusable.
This happend to me. Same thing when I turn 180 sometimes I ended up pointing at my own feet, lol. I thought my mouse was failing me but it was the firmware. I tried it for 1 day. Had a very hard time controlling recoil aswell. Never been an issue before. Also, a few times my WASD wasn't responding at all. I couldn't move only with the controller but not with keys. I had to unplug, restart everything to be able to move. Not a good thing when u got 3 min rounds and u have to struggle for a min before u can move. This needs to be fixed asap. I was looking forward to try it, many said it was so good. Well I've tried but It has too many flaws right now. I lost way too much, I had to delete it and go back to 05. Hope u can fix it. Good luck!
-
LOVE THE NEW UPDATE
SA is an amazing feature, seriously insane how helpful. I DO notice however when xhanging the SA levels, let’s say I have 8.0 on ADS, it’s fine, but maybe a slightly higher number like 9.0, the sensitivity goes bananas, super fast. But 10.0 will be back to normal. It seems a few numbers will trip everything out. Not consistently in screaming in SA intensity if that makes sense. Any idea?
Checkout the SA guide : https://youtu.be/Q_xhQhbHpyI
IIRC 0-3 or 0-5 is recommended. So 5 is kinda max?
-
Manager: 5.00.20180528
Firmware: 5.00.20181109
I believe you have the wrong manager
That's the only manager I saw on the app store.
-
The beta version of Manager isn't available in the app store. Both firmware and Manager links are on the first page of this thread.
-
The beta version of Manager isn't available in the app store. Both firmware and Manager links are on the first page of this thread.
I think Obsiv should put a note that you need to update manager on first page alot of noobs that dont know how to upgrade their devices. I personally have helped a few people on a facebook page for xim lol
-
This is the first text on the page. :)
IMPORTANT: This Beta requires you upgrade both firmware and Manager in order to access the new features. Please use the links below.
-
This is the first text on the page. :)
IMPORTANT: This Beta requires you upgrade both firmware and Manager in order to access the new features. Please use the links below.
Mybad I think he updated it have not been on first page sorry lol
-
This is the first text on the page. :)
IMPORTANT: This Beta requires you upgrade both firmware and Manager in order to access the new features. Please use the links below.
Mybad I think he updated it have not been on first page sorry lol
No, that text has been there the whole time. :)
-
Like I said b4 I followed the steps and it didnt work. Maybe it's my phn dont know. I click on the android link and nothing opens.
-
Ok so I got it to work.
The troubleshoot I did is, if itll be helpful for anyone.
I changed the setting on the page, I allowed cookies/pop ups.
I went on my phone setting and allowed downloads from unknown websites.
I uninstalled the xim apex app cause the download didnt want to work with the app on my phone. And then I open the app and forced the download, and it finally worked.
1)you have to download the xim firmware from the computer, with your xim connected to it.
2) to upgrade or download the app, come back to the same post where you uploaded the xim, but through your phone and click on the link.
I think ppl get that confused.
-
So I've updated my firmware and manager through the links on the first page, but still unable to view the new settings.
Manager version: 5.00.20181109
Firmware version: 5.00.20180501
Im usong the manager on a samsung galaxy s9
-
So I've updated my firmware and manager through the links on the first page, but still unable to view the new settings.
Manager version: 5.00.20181109
Firmware version: 5.00.20180501
Im usong the manager on a samsung galaxy s9
your firmware is still on the old one, only your manager is on the latest one
both your firmware and manager have to be on 20181109
download the flashtool for the xim from the first post and update your xim, then it should work
-
Version 20181109 on both and looks like xim manager dont detect properly the xim apex, impossible to load configs and xim manager blocks all time when trying to save configs.
P.D: Finally xim manager detect xim apex but when trying to load a config the manager block and need start it again.
-
So I've updated my firmware and manager through the links on the first page, but still unable to view the new settings.
Manager version: 5.00.20181109
Firmware version: 5.00.20180501
Im usong the manager on a samsung galaxy s9
your firmware is still on the old one, only your manager is on the latest one
both your firmware and manager have to be on 20181109
download the flashtool for the xim from the first post and update your xim, then it should work
Okay so when i do that, it says the "Xim apex is already running the same version firmware available through this flash tool" but when i plug it in and view on the manager, it still shows the firmware version 20180501.
Would a factory reset work?
Edit: okay so i may have been on a different page to where i was downloading the 20180501 flash tool instead of the 20181109 flash tool, everything seems to be working smoothly.
Cheers
-
I've updated mine and rechecked that it is updated twice and there's still no option to simulate analog movement in the movement expert setting
-
I've updated mine and rechecked that it is updated twice and there's still no option to simulate analog movement in the movement expert setting
What versions do you see under "About" in Manager?
-
I have seen this issue before with xim 4 which was resolved, but currently on xim apex there is the same issue.
I’m using sony nav the problem is with L2 trigger sensetivity , currently it will activate when it pushed down around 80% or more.
Is it possible to fix that issue?
Thanks
-
I have seen this issue before with xim 4 which was resolved, but currently on xim apex there is the same issue.
I’m using sony nav the problem is with L2 trigger sensetivity , currently it will activate when it pushed down around 80% or more.
Is it possible to fix that issue?
Thanks
Yes set the bindings under Analog and remove the digital ones for Triggers
-
I have seen this issue before with xim 4 which was resolved, but currently on xim apex there is the same issue.
I’m using sony nav the problem is with L2 trigger sensetivity , currently it will activate when it pushed down around 80% or more.
Is it possible to fix that issue?
Thanks
Obsiv can you also add a sticky note on 1st page stating that if android you need to enable unknown sources for apk to download would help alot of people out under their phone general settings: security
-
Yes set the bindings under Analog and remove the digital ones for Triggers
Can confirm this works; barely have to pull the trigger to ADS with it setup properly.
-
Obsiv can you also add a sticky note on 1st page stating that if android you need to enable unknown sources for apk to download would help alot of people out under their phone general settings: security
Your phone should tell you that when you try installing an APK and that setting isn't on. That didn't happen for you? If not, what type of phone are you using?
-
Obsiv can you also add a sticky note on 1st page stating that if android you need to enable unknown sources for apk to download would help alot of people out under their phone general settings: security
Your phone should tell you that when you try installing an APK and that setting isn't on. That didn't happen for you? If not, what type of phone are you using?
Have no problem just been helping people on installing it thats why I just stated that obsiv
-
Oh I see, thanks for helping people out!
-
I also employ the Titan 2.
Will I be able to use the features such as Steady Aim or will those be filtered out by the Titan 2?
Thank you.
-
Obsiv can you also add a sticky note on 1st page stating that if android you need to enable unknown sources for apk to download would help alot of people out under their phone general settings: security
Your phone should tell you that when you try installing an APK and that setting isn't on. That didn't happen for you? If not, what type of phone are you using?
Just for information, I am using pixel 3XL (Android 9) and it did not tell me that unknown sources was off. I had to turn it on and then was able to install the APK.
-
i noticed that the reticle magnetism / aim stickiness in paladins (the game), the effect of my aim getting “pulled” onto other targets, seems to have gotten much worse after updating to this firmware, especially when hip firing. am i just crazy, or is there some reason that would be the case?
-
i noticed that the reticle magnetism / aim stickiness in paladins (the game), the effect of my aim getting “pulled” onto other targets, seems to have gotten much worse after updating to this firmware, especially when hip firing. am i just crazy, or is there some reason that would be the case?
That would happen if you've been playing around with Simulate Analog Behaviour. If you haven't touched anything on Apex regarding the new settings, which are all disabled by default, it'll be the game or placebo effect.
-
Forgive my stupidity or ignorance here but I downloaded the TestFlight app onto my iphone 10 XS. I opened the app but no public or email link.
Where do I find the link and/or email address to request a Beta?
I already updated the Apex firmware tot he latest Beta version.
-
OK, I got it figured out.
I wasn't aware I had to use my iphone and visit the Xim Beta area and click IOS Testflight link from there.
What I originally did was visit the Xim Beta area on my iMac then clicked the link where it described what to do (download TestFlight App.....). I downloaded the TestFlight app onto my iphone but didn't download it using a link from Xim Beta site link. That was the problem.
**** Problem solved.
For dummies like me, it may help to add in the Xim Beta description that you must use iphone (if thats what you are using) and connect to the Xim Beta site section through that to get the TestFlight link otherwise you will end up like me.....downloading TestFlight without using a link to download it and left wondering how to get hooked into the Beta invite link.
Don't be me ;)
-
Ok, thanks, I'll update the text to make that more clear.
-
WOW!
I thought things were great with what Apex had to offer from the get-go but with the new Beta additions of Steady Aim and Boost Apex is now a monster on steroids.
I exclusively play COD and my play style is a very aggressive run-n-gun style. With Apex and some ballistic curves I built for my game style my game improved instantly compared to using my Elite.
Now, with the Beta update for Apex, using no ballistic's and experimenting with some Steady Aim and Boost configurations so far, Xim team has delivered a monster in spades.
My game has gone beyond the limits of what I thought was possible and I have only scratched the surface with this latest Beta build.
Apex is certified OP. 8)
Cheers to Xim team for going over the top with this latest gem!
-
downloaded and cant find any of the settings for analog and boost etc... do i have to factory reset and try again ?
-
downloaded and cant find any of the settings for analog and boost etc... do i have to factory reset and try again ?
Download latest beta apex manager too from 1st page.... & xim beta firmware. Read n pay attention, its all there on PAGE 1
https://youtu.be/Ezao54NqsvA
https://youtu.be/gHKEOkIMYUY
Pay attention and you will find it. Pls Subscribe for more informative content n smash like button too !
-
i noticed that the reticle magnetism / aim stickiness in paladins (the game), the effect of my aim getting “pulled” onto other targets, seems to have gotten much worse after updating to this firmware, especially when hip firing. am i just crazy, or is there some reason that would be the case?
That would happen if you've been playing around with Simulate Analog Behaviour. If you haven't touched anything on Apex regarding the new settings, which are all disabled by default, it'll be the game or placebo effect.
thanks, that was my assumption but i wasn’t sure. re placebo vs game change, could easily be either tbh, although paladins does change up its look mechanic/in game options frequently
-
First it felt so good , but after few days it's the same like all other versions aim just not the same ( Rainbow six siege) all my friends who owns xim apex says the same. Settings the same mouse dpi the same but feeling different. Someone mention that deadzone changes itself or something. I wish I didn't sell my xim4 never had that problem . Always used to use the same settings. And with apex it just feels like settings changed. And everytime i need to adjust.And yes I have checked mouse dpi poling rate, still the same. In manager settings the same, but feeling different. I think need sell apex and buy xim4 again.
-
Hello !
When do you think you will put this beta firmware into an official firmware?
Regards
S
-
First it felt so good , but after few days it's the same like all other versions aim just not the same ( Rainbow six siege) all my friends who owns xim apex says the same. Settings the same mouse dpi the same but feeling different. Someone mention that deadzone changes itself or something. I wish I didn't sell my xim4 never had that problem . Always used to use the same settings. And with apex it just feels like settings changed. And everytime i need to adjust.And yes I have checked mouse dpi poling rate, still the same. In manager settings the same, but feeling different. I think need sell apex and buy xim4 again.
The xim4 won’t be getting support for much longer
-
first post on the xim forums.i cant seem to update my manager to the beta firmware im on android and the link keeps shutting out.
-
I have problem with my xim apex..when I connect it it flashes rgb and it's not connects the things that I have in my xim apex hub
-
I apologize if this has been discussed, but I could not find it. In regards to SAB, is there a numerical range? Is a 1 on the SAB setting comparable to slowly moving the analog stick, and lets say 500 on the SAB setting comparable to using a keyboard, where there is no middle ground between not moving and moving at full speed? Thanks
-
I've been reading this thread and seeing some really positive feedback, but I seem to be a little confused. Can anyone explain to me the use case scenario for boost and steady aim? I don't see how expanding the emulated deadzone would assist with accuracy, and I also fail to see how a setting that does the opposite of smoothing would help with micro stutters.
If there's any video demonstration, that would be even better!
Edit: I just saw the videos posted above... thats what I get for not reading the thread to the end!! Thanks!!
-
Any chance I could get a bit more of descriptive details configuring the trigger setup? I too use Sony navigation and the L2 trigger on the back requires quite a lot of travel before registering, I would love to make it much more sensitive to have a quicker reaction with less distance of pushing down.
-
How do I download the manger? I have finished updating the apex
-
I'm desperate. Please, anyone, help. I can't get the latest version on my phone. I click the link for android for the apex manager and all it does it flash what appears to be a pop up briefly then disappears. There's nothing in my downloads. There's no new tabs. Pure nothingness. I enabled pop ups and signed in, still nothing. I don't know why there's not a beta version in the store. If I missed it let me know. Thank you everyone.
-
I also employ the Titan 2.
Will I be able to use the features such as Steady Aim or will those be filtered out by the Titan 2?
-
I'm desperate. Please, anyone, help. I can't get the latest version on my phone. I click the link for android for the apex manager and all it does it flash what appears to be a pop up briefly then disappears. There's nothing in my downloads. There's no new tabs. Pure nothingness. I enabled pop ups and signed in, still nothing. I don't know why there's not a beta version in the store. If I missed it let me know. Thank you everyone.
Did you enable download of APKs from unknown sources?
-
My buddy just bought the Xim and wants to download the beta. But when he downloads TestFlight it says “No Apps Available to Test”. How does he get Xim in TestFlight?
-
Maybe since I have an iPhone6 it will not let me update to the new manager?
-
Is that true? You have to have a certain level of iPhone to run the manager?
-
Is that true? You have to have a certain level of iPhone to run the manager?
it works for all iphones that run iOS 8 or newer, so of course an iPhone 6s will work
Maybe since I have an iPhone6 it will not let me update to the new manager?
My buddy just bought the Xim and wants to download the beta. But when he downloads TestFlight it says “No Apps Available to Test”. How does he get Xim in TestFlight?
check if you properly applied to the testflight program via the link in the first post of this topic, other than that it can take a few days until apple accepts you
-
So I downloaded the Android APK to my phone and "installed" it, but when I open up the app I still don't have all of the new features available as seen in the tutorials...any tips?
-
So I downloaded the Android APK to my phone and "installed" it, but when I open up the app I still don't have all of the new features available as seen in the tutorials...any tips?
What new features exactly ?? Pls Post link here to page where you downloaded apex manager app & Xim Apex firmware from in reply?
Tip : all you need is go to Page 1 of this topic & read first few lines carefully! Do it ? & you will not need to reply to this post EXCEPT " Thanks "
Cheers
-
I keep trying to flash the xim with this update, the light is blue, and when I release it I press update firmware on the program, and all the options just go grey from there and nothing else happens. Suggestions?
-
I'm desperate. Please, anyone, help. I can't get the latest version on my phone. I click the link for android for the apex manager and all it does it flash what appears to be a pop up briefly then disappears. There's nothing in my downloads. There's no new tabs. Pure nothingness. I enabled pop ups and signed in, still nothing. I don't know why there's not a beta version in the store. If I missed it let me know. Thank you everyone.
Download the APK on your computer, drag the APK over to your Google Drive. Open the file through drive on your phone. Easy!
-
I'm desperate. Please, anyone, help. I can't get the latest version on my phone. I click the link for android for the apex manager and all it does it flash what appears to be a pop up briefly then disappears. There's nothing in my downloads. There's no new tabs. Pure nothingness. I enabled pop ups and signed in, still nothing. I don't know why there's not a beta version in the store. If I missed it let me know. Thank you everyone.
Download the APK on your computer, drag the APK over to your Google Drive. Open the file through drive on your phone. Easy!
or copy the link and pasted on a new tab
http://cloud.xim.tech/Beta/XIMAPEXManager-20181109-Android.apk
-
I just got a wooting one keyboard for xmas, does the SAB benefit me at all, or make it worse? Or should i just not use SAB because the wooting is analog? or simulated analog.... not sure which it is
-
bump?
-
Hello,
Link for the Android Manager dosent work? Can someone help me?
Thank you... And sorry for My Bad english :)
-
I just verified it does work.
-
Hey Obv
Did you happen to see my post above about wooting one? Will SAB benefit me at all? I also noticed that when i switched to it, my deagle shots in Fortnite arent hitting, when before, i was spot on. its almost like its shooting right next to their head is my guess. Is there a setting to adjust that? please let me know
gracias
-
No Wooting won't benefit from SAB -- that's specially designed for digital keyboards. But, as we support joysticks, the Wooting should work through that device type.
-
No Wooting won't benefit from SAB -- that's specially designed for digital keyboards. But, as we support joysticks, the Wooting should work through that device type.
wait, is there a certain setting i need to change in my XIM to change to joysticks device type?
-
No, if the USB device presents itself as a USB joystick, then XIM will treat it that way.
-
Hey Obv
Did you happen to see my post above about wooting one? Will SAB benefit me at all? I also noticed that when i switched to it, my deagle shots in Fortnite arent hitting, when before, i was spot on. its almost like its shooting right next to their head is my guess. Is there a setting to adjust that? please let me know
gracias
Thanks! Did you see my question about Deagle shots? can you please let me know what setting can be tweaked to adjust for that? The same issue happened when i initially switched from v501 to the November Beta one so i went back to 501 cause i couldnt find the answer.. Seems like it happened with the SAB on, and now that i switched to the wooting one which is analog
-
Hey Obv
Did you happen to see my post above about wooting one? Will SAB benefit me at all? I also noticed that when i switched to it, my deagle shots in Fortnite arent hitting, when before, i was spot on. its almost like its shooting right next to their head is my guess. Is there a setting to adjust that? please let me know
gracias
Thanks! Did you see my question about Deagle shots? can you please let me know what setting can be tweaked to adjust for that? The same issue happened when i initially switched from v501 to the November Beta one so i went back to 501 cause i couldnt find the answer.. Seems like it happened with the SAB on, and now that i switched to the wooting one which is analog
What is your sab set to? I don’t think you need to go higher then 20.
-
Thanks! Did you see my question about Deagle shots? can you please let me know what setting can be tweaked to adjust for that? The same issue happened when i initially switched from v501 to the November Beta one so i went back to 501 cause i couldnt find the answer.. Seems like it happened with the SAB on, and now that i switched to the wooting one which is analog
What is your sab set to? I don’t think you need to go higher then 20.
Hello,
I dont have SAB on because i got the wooting one keyboard, which is an analog keyboard, but my aim with a deagle is exactly how it was before the wooting one when i had a digital keyboard with v20181109 with SAB on 100.
Basically,
v20180501 - Digital Keyboard, no SAB - AA with deagle would barely miss
v20181109 - Digital Keyboard, SAB =100, AA with deagle would miss 80-90% of the time
v20180501 - Wooting One - AA with deagle would miss 80-90% of the time
v20181109 - Wooting One, SAB = off, AA with deagle would miss 80-90% of the time
Got wooting one for Christmas. For those that dont know, the wooting one is a pressure sensitive analog keyboard, or at least the WASD keys and the ones you bind in the analog mode are. Its actually a mix of digital and analog inputs for full keyboard functionality. You can set it to just analog but then you cant type or do anything else.
Im hoping there is some setting that can be tweaked to make that minor adjustment back so my deagle was the way it was.
My settings are
Game - Fortnite
v20180501 - I just changed back to v0501 a few days ago but i had v20181109.
Logitech G502
3700k DPI
500 polling
Hip 17 Sens, default Sync
ADS 4.5 sens, Common Sync
SAB = 0 (off)
Thank you for all the help.
-
Thanks! Did you see my question about Deagle shots? can you please let me know what setting can be tweaked to adjust for that? The same issue happened when i initially switched from v501 to the November Beta one so i went back to 501 cause i couldnt find the answer.. Seems like it happened with the SAB on, and now that i switched to the wooting one which is analog
What is your sab set to? I don’t think you need to go higher then 20.
Hello,
I dont have SAB on because i got the wooting one keyboard, which is an analog keyboard, but my aim with a deagle is exactly how it was before the wooting one when i had a digital keyboard with v20181109 with SAB on 100.
Basically,
v20180501 - Digital Keyboard, no SAB - AA with deagle would barely miss
v20181109 - Digital Keyboard, SAB =100, AA with deagle would miss 80-90% of the time
v20180501 - Wooting One - AA with deagle would miss 80-90% of the time
v20181109 - Wooting One, SAB = off, AA with deagle would miss 80-90% of the time
Got wooting one for Christmas. For those that dont know, the wooting one is a pressure sensitive analog keyboard, or at least the WASD keys and the ones you bind in the analog mode are. Its actually a mix of digital and analog inputs for full keyboard functionality. You can set it to just analog but then you cant type or do anything else.
Im hoping there is some setting that can be tweaked to make that minor adjustment back so my deagle was the way it was.
My settings are
Game - Fortnite
v20180501 - I just changed back to v0501 a few days ago but i had v20181109.
Logitech G502
3700k DPI
500 polling
Hip 17 Sens, default Sync
ADS 4.5 sens, Common Sync
SAB = 0 (off)
Thank you for all the help.
are you talking about shots far off or close up? I have noticed a considerable drop in AA for far off shots since SAB implementation. I really struggle with anything that isnt within the range of a smg in fortnite. It seems like AA doesn't kick in even when I try and re-ads to reset it.
Also ... I feel that fortnite is constantly messing with the amount of AA they give when they push updates. Frequently when I don't even change my settings I notice a considerable difference in AA when I ADS at people standing still in the lobby.... or go into playgrounds mode. It is really annoying.
-
Try changing your ads sync to default and not common
-
Try changing your ads sync to default and not common
Doesnt Default and Off have the lowest AA?
-
are you talking about shots far off or close up? I have noticed a considerable drop in AA for far off shots since SAB implementation. I really struggle with anything that isnt within the range of a smg in fortnite. It seems like AA doesn't kick in even when I try and re-ads to reset it.
Also ... I feel that fortnite is constantly messing with the amount of AA they give when they push updates. Frequently when I don't even change my settings I notice a considerable difference in AA when I ADS at people standing still in the lobby.... or go into playgrounds mode. It is really annoying.
basically anything mid rangish, for example if im standing at house in Lazy Links and aim at someone at end of pool they miss most of the time now
-
The too much aim assist is making you miss your shots
-
The too much aim assist is making you miss your shots
And your getting stuck in the bubble which is a huge problem your right outside the actually hitbox
-
The too much aim assist is making you miss your shots
And your getting stuck in the bubble which is a huge problem your right outside the actually hitbox
Thank you responding Antec. I went ahead and changed my ADS to default instead of common. Will let you know if that helps :) was doing Oneshot last night so didnt have a chance to get a deagle heh
-
How do i get the 109 manager to work on my ss s7 ? Firmwares any help appreciated
-
Firmware installed with no worrys just the manager wont change i really wanna try the new steady aim analog boost features currently stuck on 109 fw with latest manager but need 109 manager need help asap to solve this issue thx xim nation 🤙
-
Firmware installed with no worrys just the manager wont change i really wanna try the new steady aim analog boost features currently stuck on 109 fw with latest manager but need 109 manager need help asap to solve this issue thx xim nation 🤙
im not familiar with the android side of things but check TestFlight?
-
Firmware installed with no worrys just the manager wont change i really wanna try the new steady aim analog boost features currently stuck on 109 fw with latest manager but need 109 manager need help asap to solve this issue thx xim nation 🤙
im not familiar with the android side of things but check TestFlight?
Toby did my suggestions help you with your Deagle shots?
-
this is the best firmware we have had so far!
Simulate Analog Behaviour reduces the amount of issues with the aim assist to a minimum! :)
i can only recommend everyone to give this new version a try!
Sir! Looking forward for a video that explains what these new settings do and how to use them properly :)
video should be out tomorrow :)
What steady aim value would most closely resemble the SA3 firmware in xim4?
-
Firmware installed with no worrys just the manager wont change i really wanna try the new steady aim analog boost features currently stuck on 109 fw with latest manager but need 109 manager need help asap to solve this issue thx xim nation 🤙
im not familiar with the android side of things but check TestFlight?
Toby did my suggestions help you with your Deagle shots?
Sorry for the delayed response, i was a bit sick all week. It did but honestly, i had to revert back to default sens and common ads because i just couldnt get my AIM sens close to what it was and everything was just off but my hunting rifle and deagle def improved by doing that. Thanks bud
-
I can update the firmare without a problem but not the manager the link doesnt open i dont know why... Can someone help me with this?
And nope testflight and other apps do not work
Ps im on an op6t
Idea: cant you like upload the apk to an official apk downloader so we can download it there? Or make it a beta tester version in the play store
-
I can update the firmare without a problem but not the manager the link doesnt open i dont know why... Can someone help me with this?
And nope testflight and other apps do not work
Ps im on an op6t
Idea: cant you like upload the apk to an official apk downloader so we can download it there? Or make it a beta tester version in the play store
Press and hold when selecting the download link to choose the equivalent of 'download as'.
-
How do I get back managers and firmware??
-
Does this beta still work? I remember this was the best firmware I've used.
-
Does this beta still work? I remember this was the best firmware I've used.
X2 can’t find the manager, someone needs to do a link
-
this one is better than the last one i feel my aim is better on overwach
-
works in the last update? XIM APEX [Firmware 20200307] (** LATEST **)
-
works in the last update? XIM APEX [Firmware 20200307] (** LATEST **)
What do you mean exactly compared to the last update?
-
Good morning, i try to download the app for ios beta, but it comes out written that i don't have an invitation, can someone tell me how to do it ?? thank you very much
-
You don't need to register for Testflight, XIM APEX Manager in the App Store is the latest version.