XIM Community

XIM APEX => Game Support => Topic started by: RML on 04:13 PM - 10/16/18

Title: BO4: Advanced Setup (20181216)
Post by: RML on 04:13 PM - 10/16/18
Per requests, here's my current setup for BO4.

I personally like utilizing Aim Assist (AA) as I believe it gives me an advantage. Why? Because when utilizing AA I can out maneuver and out aim "most" of my opponents that can't move and turn as fast as I can and maintain a high degree of accuracy. I can do this because I can play at higher sensitivity's then a controller player and still be accurate with my shots thanks to the slow down effects of AA. With a little practice XIM can easily put you into the "Elite" class of controller players. The biggest problem with AA is it can be a little over powering for a device as precise as a mouse. For more on that, please see the link in my signature titled "Anti Aim Assist curve set for any FPS game".

PLEASE NOTE: I'm currently getting away from any AA curves with APEX. APEX polling at 1000hz combined with SYNC OFF, 12000 DPI and some added boost cuts through AA nicely.

If you're newer to XIM and you don't know me and you're wondering if this setup may apply to you. Here's a little background on me and my setup.

"I use 12000 dpi because it helps over come AA a little. I use SYNC OFF, because it helps over come AA a little, I use 1000hz. because it helps over come AA a little. Then I use Boost to do the rest. The objective would be to use as little Boost as possible because its the only one of these that will have a negative impact on Linear movement. I've taken all of these things into account, and came up with the settings I've shared. The goal being to make Aim Assist feel more manageable without degrading linear and micro movements to noticeably.

Morale of the story... The more you lower DPI, Polling, SYNC settings and Sensitivity, the more you have to compensate with curves and boost if Aim Assist is too strong for you. I understand wanting to use lower DPI, I honestly Used to be "That Guy!" Od1n and myself were probably the biggest "known members" here that have spoken this way. I swore on 4000 dpi! That was my thing with my Destiny Setup. 4000 DPI, that's because I grew up with it. 12000 dpi felt jittery to me.

Then APEX came along. As an Alpha tester I was committed to test and trial running at 1000hz. At first this felt pretty Jittery to me and I had some real concerns about the quality of performance. But after about a week of playing at 1000hz. and after I realized how much better Aim Assist felt to me while playing at 1000hz. I was completely sold that this is the future of XIM! It takes performance up a few notches, it's more responsive, it cuts through AA better!

Then HE4DHUNTER convinced me to do something I swore I NEVER would do, convert to 12000 DPI. Again, at first this felt jittery to me as much or more so then 1000hz. But I learned to dial in my sensitivity with these new settings and my G502. I learned to steady my hand a little. Now, I won't stray from 12000 DPI either.

(If you don't know who HE4DHUNTER is, watch any of the Admin videos advertising a XIM product since EDGE, if it's COD, then it's HH behind the mouse. The guy is the best XIM COD player on the planet, period!)

My point is. I do these things for a reason. It made sense to me to alter my style and switch to 12000 dpi because I liked how it made AA feel for me when compared to lower DPI settings.

Aim Assist has always been my one and only Nemesis ever since I bought my first XIM and it seems to be just getting stronger with most games. So what you see in my setup is quite literally an evolution of my gaming style over the last 5 years (maybe more)! But it was a necessity for me personally. In order to make AA work for me, to my expectations and still keep linear movement as crisp and clean as possible. This setup is what I had to do.

That being said, everyone is different. This is the story behind my setup. If you asked "what could I do to match your settings?" I don't know how to fully explain that to you without sharing my journey. So sorry for the long winded, ba,blah,ba blah. But that's my answer.

Cheers!"   - RML



THEORY BEHIND THIS SETUP:
- High DPI helps cut through AA (Aim Assist).
- 1000hz helps cut through AA.
- SYNC OFF helps cut through AA.
- Higher Sensitivity helps cut through AA.
- Boost helps cut through AA.
- Smoothing increases AA.



HOW TO APPLY THIS CONCEPT TO YOUR GAME:
- Use your mouses Max DPI setting.
- Activate Advanced settings in XIM Manager.
- Use 1000hz in XIM Manager and 1000 polling on your mouse. (if your mouse doesn't poll at 1000hz consistently and you're feeling Stutter, then run XIM manager at 500hz. This will make AA slightly stronger but fix the stutter. If you're unsure if it's your mouse's polling rate, then add Smoothing and see if it fixes the issue. You should add Smoothing in increments of 1 until stutter is gone. You want to keep Smoothing as low as possible as it will also make AA stronger).
- Change your Sync setting from DEFAULT to SYNC OFF, in manager.
- Adjust your Hip sensitivity in game until you feel comfortable. Adjust your ADS sensitivity the same, but maybe push it a little toward the fast side. Remember higher sens = less AA and raising your ADS sensitivity is the Purest way of eliminating AA. So push it but make sure it's controllable, I suggest you test it on bots in a private game to get the feel for how AA is effecting your aim.
- While testing your aim in a private match, Adjust boost in increments of 100 until AA feels manageable to you. You can then fine tune in smaller increments if you'd like, I'd suggest 25 minimum.

If needed, I suggest the following for applying Smoothing to your setup.
- MUTIPLAYER: 0-4
- BLACKOUT: 4-8

If needed, I suggest the following for applying Boost to your setup.
- BLACKOUT: 0-400 (Going above 400 in Blackout may make long range sniping difficult).
- MULTIPLAYER: 0-1000 (All depends on how much AA you like, if you go above 1000 though aiming gets to responsive IMO).


Got it? Good! On to the setup...

Here's my Full Setup
Beta Firmware/Manager, Link - https://community.xim.tech/index.php?topic=73173.0
In game sensitivity should be maxed at Insane 14
Ads 1x
High Zoom .75x

Aim Assist in game should be [ON]
12000 DPI - http://www.csgosetup.com/dpi-calculator/
G502 Polling is set to 1000
BO4 ST
XIM APEX Polling - 1000
Sync Off
ADS Delay 400ms


FULL CONFIG (Sync Off) - I'm a NAV user, so you'll have to assign buttons to your liking. This "Full Config Code" is for APEX ONLY!
Code: [Select]
   >>> XIM APEX [BLACKOUT ] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<< 


If the settings above don't work for you then you can try an Anti Aim Assist curve. If you're going to use any of these curves I suggest you first remove any Boost from your settings. Here's a full configuration code. This is an Alpha Stencil ST and not meant for use with ANY particular game. This Configs only purpose is to act as a storage area for AAA curves. Every sub within this config has a AAA curve in it. Every AAA curve I currently recommend is within this config. Just copy/paste the curve from this config into your own.

Anti Aim Assist Curves Storage Config.
Code: [Select]
  >>> XIM APEX [Anti Aim Assist Curves] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

Here's my G502 button mapping (cause several have asked).
(https://i.imgur.com/7nofMHZ.jpg)


CHEERS!
Title: Re: BO4 My Advanced Setup/Advice
Post by: antithesis on 05:23 PM - 10/16/18
As always, your thicc curves are a valuable contribution. I'm sure you're going to get a tonne of PMs asking for your latest settings, so good luck dealing with that :D

How are you handling the wingsuit, is it just a curve? No turn assist, swapping sticks etc?
Title: Re: BO4 My Advanced Setup/Advice
Post by: Deazly on 06:30 PM - 10/16/18
I've been using the same setup without curves and on 3200k DPI. I've liked your curves for other games and will test these curves too!

Thanks for the share Rml. *Clap!* 8)

More to follow:....~~~~~~~.  ;D


Ps: I prefer to use and learn with AA on.
Title: Re: BO4 My Advanced Setup/Advice
Post by: IAmVerbose on 06:40 PM - 10/16/18
Ss always thanks friendo. Also cheers for thinking of the lil guys and adding x4 curves
Title: Re: BO4 My Advanced Setup/Advice
Post by: M1GATRON on 06:43 PM - 10/16/18
Thank you for taking the to post these! @RML are you using Turn assist in this configuration for the Wing Suit?
Title: Re: BO4 My Advanced Setup/Advice
Post by: Agathon on 06:50 PM - 10/16/18
I'm using his setup and the wingsuit requires turn assist. I don't see how he could play without it.
Title: Re: BO4 My Advanced Setup/Advice
Post by: Xenaph1 on 07:41 PM - 10/16/18
What is your hip curve and setting ?
Title: Re: BO4 My Advanced Setup/Advice
Post by: czech on 07:43 PM - 10/16/18
Rml can you I can get full configuration  for apex please thank you
Title: Re: BO4 My Advanced Setup/Advice
Post by: Admiralkizaru on 07:48 PM - 10/16/18
I am very sorry for asking this but when I try to copy and paste the code into my xim4 settings on Android I am getting the red caution icon. Unfortunately, with my bad lucky YouTube is down and I cant really watch any help videos atm...FML. Do I need to update my Xim4 app for firmware? I am on Firmware 4.00.20170103.
Title: Re: BO4 My Advanced Setup/Advice
Post by: milkman on 07:53 PM - 10/16/18
Thanks RML!! Can you add a full config for us plz.

Thank you in advance.
Title: Re: BO4 My Advanced Setup/Advice
Post by: IAmVerbose on 08:03 PM - 10/16/18
Just an update, I played with the settings via xim4 for a few hours and I have to say, amazing, I feel like I can actually snipe in peace now aswell as overall aiming feels slicker aswell as brought into the assist alot nicer. Played some blackout aswell and sniping has never felt more amazing, dropped a 10 kill match with ONLY the paladin via squads

6hip w curve via xim4 7 ads with curve heres my full cfg thanks to rml

Code: [Select]
>>> XIM4 [Call of Duty: Black Ops 4] START PASTE >>>
X4C: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:X4C
<<< XIM4 END PASTE <<<

(https://image.ibb.co/kuPLT0/10bomb.jpg)
Title: Re: BO4 My Advanced Setup/Advice
Post by: RML on 08:15 PM - 10/16/18
Thanks for letting me know I forgot to mention Turn Assist with Wing Suit, etc. I updated the OP

Also added Full config for Apex. Sorry, I no longer have a Xim4
Title: Re: BO4 My Advanced Setup/Advice
Post by: RML on 08:22 PM - 10/16/18
I'm using his setup and the wingsuit requires turn assist. I don't see how he could play without it.

Yes it does, thank you. I added that info to the OP.




What is your hip curve and setting ?

I do not use a curve for Hip. You can try ADS 1.0 you may like it on Hip. I prefer no curve on Hip though as I only use curves to combat AA. Hip has very little AA



Rml can you I can get full configuration  for apex please thank you

Done!
Title: Re: BO4 My Advanced Setup/Advice
Post by: [email protected] on 09:07 PM - 10/16/18
Thank RML. It seems your ADS [ACTIVE] Curve is different from ADS curve in full configuration. Which one do you use?

from full configuration
(https://preview.ibb.co/iCXP6L/Screenshot-20181017-095732.jpg)

from ADS [ACTIVE] Curve
(https://preview.ibb.co/nop46L/Screenshot-20181017-095706.jpg)
Title: Re: BO4 My Advanced Setup/Advice
Post by: IAmVerbose on 09:17 PM - 10/16/18
Not a worry the x4 cfg works perfect much love thanks brother
Title: Re: BO4 My Advanced Setup/Advice
Post by: wAxtreme on 09:34 PM - 10/16/18
Got 2 question
1. what firmware are you on?
2. The steady aim profile how do you recommend using it, does it needs to be set as the same button as the ads ? ( sorry if its a stupid question )
Once again you did a very good job on this!
Thanks for sharing!
Title: Re: BO4 My Advanced Setup/Advice
Post by: Nicktyler222 on 09:47 PM - 10/16/18
Incredible detailed post... I can't wait to try these tomorrow. Wish I read this before bedtime!

Just curious, what are your thoughts on the BO3 ST in comparison to the BO4 ST? Pros/cons? I've noticed a less floaty feeling with BO3 and I've stuck with that as it feels so much more responsive. I'm curious if you've either found a way to combat that "off" feeling or are just dealing with it.
Title: Re: BO4 My Advanced Setup/Advice
Post by: RML on 10:52 PM - 10/16/18
Thank RML. It seems your ADS [ACTIVE] Curve is different from ADS curve in full configuration. Which one do you use?

Hmmm... thatís strange, I wonder if it didnít transfer right over to Apex outside of the Full config? Very weird. Iím using the one from full config. Iíll repost it.

Thanks! And good catch!


Incredible detailed post... I can't wait to try these tomorrow. Wish I read this before bedtime!

Just curious, what are your thoughts on the BO3 ST in comparison to the BO4 ST? Pros/cons? I've noticed a less floaty feeling with BO3 and I've stuck with that as it feels so much more responsive. I'm curious if you've either found a way to combat that "off" feeling or are just dealing with it.

At first I felt the same way about the BO3 config. However after playing on BO4 ST for a bit it feels better to me now. I think I just got used to a different feel. So 4 ST felt a little strange at first. However, if you make 2 STís and alternate between them, youíll notice the 4 ST feels better in HIP. Swipe your mouse back and forth and alternate them. 3 seems like the turn speed slows towards the end of the swipe, 4 feels consistent from beginning to end. Thatís what ultimately made me switch and stick with it.

However, these curves will work fine with either ST. So thatís up to you!

Cheers!
Title: Re: BO4 My Advanced Setup/Advice
Post by: RML on 11:20 PM - 10/16/18
Got 2 question
1. what firmware are you on?
2. The steady aim profile how do you recommend using it, does it needs to be set as the same button as the ads ? ( sorry if its a stupid question )
Once again you did a very good job on this!
Thanks for sharing!

I'm on the latest Gold firmware (not the fortnite Beta stuff)

I use it as an Alternate ADS currently. When I do use it which is rare... very loong shots! Kind of like PUBG if you were used to using alternate Aiming buttons there.
Title: Re: BO4 My Advanced Setup/Advice
Post by: Phoenix10 on 12:31 AM - 10/17/18
Code: [Select]
    >>> XIM APEX [RML - BLACKOUT 60FPS] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

ADS [ACTIVE] Curve:
:
Code: [Select]
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1ABAgMEFQX26AnMjIyMjIyMjIyMjI:X4MB<<< XIM4 END PASTE <<<


good morning my friend
which of that two includes your full setup for multiplayer ???
am running on XimApex
and i like your curves set ups

am also running G502 on 3200 Dpi

i mean which link i have to use in order to get all of your curves and your final set up ??
Title: Re: BO4 My Advanced Setup/Advice
Post by: milkman on 12:45 AM - 10/17/18
Code: [Select]
    >>> XIM APEX [RML - BLACKOUT 60FPS] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

ADS [ACTIVE] Curve:
:
Code: [Select]
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1ABAgMEFQX26AnMjIyMjIyMjIyMjI:X4MB<<< XIM4 END PASTE <<<


good morning my friend
which of that two includes your full setup for multiplayer ???
am running on XimApex
and i like your curves set ups

am also running G502 on 3200 Dpi

i mean which link i have to use in order to get all of your curves and your final set up ??

The full config is the top one  BLACKOUT 60 FPS.
then adjust the sensitivity to your liking.
Great work RML..
Thank you.
Title: Re: BO4 My Advanced Setup/Advice
Post by: Phoenix10 on 12:58 AM - 10/17/18
perfect !! thanks bro
Title: Re: BO4 My Advanced Setup/Advice
Post by: Omarf826 on 01:54 AM - 10/17/18
Thank RML. It seems your ADS [ACTIVE] Curve is different from ADS curve in full configuration. Which one do you use?

from full configuration
(https://preview.ibb.co/iCXP6L/Screenshot-20181017-095732.jpg)

from ADS [ACTIVE] Curve
(https://preview.ibb.co/nop46L/Screenshot-20181017-095706.jpg)

Woahh, good catch, thats a mind @#$% right there haha. I second the curiousty as well
Title: Re: BO4 My Advanced Setup/Advice
Post by: neopaxxx on 04:40 AM - 10/17/18
Nice config, bit I think for blackout the sensitivities are too high.
Title: Re: BO4 My Advanced Setup/Advice
Post by: WarioMario on 05:38 AM - 10/17/18
hello, the configuration that comes out of the blackout is valid for the multiplayer? greetings, thank you.
Title: Re: BO4 My Advanced Setup/Advice
Post by: Taktikz on 06:48 AM - 10/17/18
RML - What is the XIM4 1.1 Curve for on your opening post?

Also, do you use cloth pad or hard pad? I use same dpi and mouse as you and find cloth better than hard pad for this game, but hard pad is better for Overwatch for me.

And what does "Alternate ADS curves for "Less AA" then Vanilla settings (no curve).
XIM4 1.0:" mean? What do you mean "No curve" ? Isn't this a curve?
Title: Re: BO4 My Advanced Setup/Advice
Post by: Phoenix10 on 07:03 AM - 10/17/18
First TD game with that settings and i scored 15-5 not bad at all..
I think hip is slow for me, i will increase it to 6

Also i have some questions

1. What is Wing Suit and when i need it? Which key to put on activation?

2. What are the other ADS auxiliary?

3. Can i change the speed of the ads speed or i will loose curves?
Title: Re: BO4 My Advanced Setup/Advice
Post by: RML on 07:09 AM - 10/17/18
Nice config, bit I think for blackout the sensitivities are too high.

That's simple, turn your sensitivity down. I've actually been leaning towards 500hz lately.


 
hello, the configuration that comes out of the blackout is valid for the multiplayer? greetings, thank you.

It'll work for all game modes. As neopaxx posted abov, you may want to adjust sensitivity a little. My advice to you guys is to setup an ADS for Blackout and an ADS for other game modes. Then all you have to do is Activate one and deactivate the other depending on what you're playing.

The reasoning for this is you will have ALOT of CQC situations in Multiplayer. The closer you are to a player the more the Aim Assist you will encounter. Blackout on the other hand has ALOT of long range encounters that have very little Aim Assist. Another words, you may want higher sens for Multiplayer then you do in Blackout.


First TD game with that settings and i scored 15-5 not bad at all..
I think hip is slow for me, i will increase it to 6

Also i have some questions

1. What is Wing Suit and when i need it? Which key to put on activation?

2. What are the other ADS auxiliary?

3. Can i change the speed of the ads speed or i will loose curves?


1 - Wing suit is for Blackout at the beginning of the game. This also works very well for controlling Vehicles in Blackout and for controlling some Kill Streaks that have very slow look mechanics.

2 - The other ADS profiles are just there for you guys to tryout. 1.0 is the curve I was using with the BO3 ST and could be useful for some of you that feel like my [Active] curve is too aggressive.

3 - You should adjust your sensitivity to your liking. The Active curve should typically require you to lower your sensitivity for ADS, compared to using Vanilla settings (no curve).

BTW - I've only played 1 TDM game and I was 60-4, Lol.. I primarily only play Blackout.

Title: Re: BO4 My Advanced Setup/Advice
Post by: HypeR on 07:42 AM - 10/17/18
Nice config, bit I think for blackout the sensitivities are too high.

That's simple, turn your sensitivity down. I've actually been leaning towards 500hz lately.


 
hello, the configuration that comes out of the blackout is valid for the multiplayer? greetings, thank you.

It'll work for all game modes. As neopaxx posted abov, you may want to adjust sensitivity a little. My advice to you guys is to setup an ADS for Blackout and an ADS for other game modes. Then all you have to do is Activate one and deactivate the other depending on what you're playing.

The reasoning for this is you will have ALOT of CQC situations in Multiplayer. The closer you are to a player the more the Aim Assist you will encounter. Blackout on the other hand has ALOT of long range encounters that have very little Aim Assist. Another words, you may want higher sens for Multiplayer then you do in Blackout.


First TD game with that settings and i scored 15-5 not bad at all..
I think hip is slow for me, i will increase it to 6

Also i have some questions

1. What is Wing Suit and when i need it? Which key to put on activation?

2. What are the other ADS auxiliary?

3. Can i change the speed of the ads speed or i will loose curves?


1 - Wing suit is for Blackout at the beginning of the game. This also works very well for controlling Vehicles in Blackout and for controlling some Kill Streaks that have very slow look mechanics.

2 - The other ADS profiles are just there for you guys to tryout. 1.0 is the curve I was using with the BO3 ST and could be useful for some of you that feel like my [Active] curve is too aggressive.

3 - You should adjust your sensitivity to your liking. The Active curve should typically require you to lower your sensitivity for ADS, compared to using Vanilla settings (no curve).

BTW - I've only played 1 TDM game and I was 60-4, Lol.. I primarily only play Blackout.


Yo RML what's ur ads sens in normal modes do u lowering ur ads sens?
Title: Re: BO4 My Advanced Setup/Advice
Post by: duvdvn on 08:06 AM - 10/17/18
Hello RML!

I little confuse about the ballistic curve in xim apex.

if i want to copy just the ballistic curve and play with AA (in-game settings), what Ballistic should i use?

in your post i see 3 kind of ballistic curve, and i guess that the first one is for AA off (in-game settings). what the others?

Thanks!
Title: Re: BO4 My Advanced Setup/Advice
Post by: Phoenix10 on 08:09 AM - 10/17/18

1 - Wing suit is for Blackout at the beginning of the game. This also works very well for controlling Vehicles in Blackout and for controlling some Kill Streaks that have very slow look mechanics.




Hahaha ok as i play mostly TD and i use sony controller and no keyboard.. What key i have to set for it??
Title: Re: BO4 My Advanced Setup/Advice
Post by: Taktikz on 08:33 AM - 10/17/18

1 - Wing suit is for Blackout at the beginning of the game. This also works very well for controlling Vehicles in Blackout and for controlling some Kill Streaks that have very slow look mechanics.

Hahaha ok as i play mostly TD and i use sony controller and no keyboard.. What key i have to set for it??

do you mean the Nav controller? If so, I use the "X" button as my Wingsuit/Vehicle Button.

My Full Button Config Is Here if anyone wants to try it;

Nav + G502 Mouse

Nav L2 Bumper = ADS
Nav L1 Bumper = Sprint
Nav "X" Button = Wingsuit/Vehicles/Killstreak Config Change
Nav "O" Button = Change Weapon
Nav "PS" Button = Map / Scoreboard
Nav Push Down On Analogue = Crouch/Slide/Prone
D-Pad = Unchanged (Scroll through weapons/loot/emotes etc

Left Click = Fire
Right Click = Jump
Scroll Up = Inventory
Scroll Down = Melee
Scroll Button = Reload / Pick Up Loot
Left Mouse Button Front = Heal
Left Mouse Button Back = Gadget

I think that's everything. People find it weird that I use L2 on the Nav to ADS instead of right click on the mouse, but I love it that way.
Title: Re: BO4 My Advanced Setup/Advice
Post by: wAxtreme on 09:01 AM - 10/17/18
Got 2 question
1. what firmware are you on?
2. The steady aim profile how do you recommend using it, does it needs to be set as the same button as the ads ? ( sorry if its a stupid question )
Once again you did a very good job on this!
Thanks for sharing!

I'm on the latest Gold firmware (not the fortnite Beta stuff)

I use it as an Alternate ADS currently. When I do use it which is rare... very loong shots! Kind of like PUBG if you were used to using alternate Aiming buttons there.

Thanks for the reply!
Title: Re: BO4 My Advanced Setup/Advice
Post by: milkman on 09:29 AM - 10/17/18
Hello RML!

I little confuse about the ballistic curve in xim apex.

if i want to copy just the ballistic curve and play with AA (in-game settings), what Ballistic should i use?

in your post i see 3 kind of ballistic curve, and i guess that the first one is for AA off (in-game settings). what the others?

Thanks!

The curve is the "ACTIVE AA"  Second one on the top.
👍
Title: Re: BO4 My Advanced Setup/Advice
Post by: RML on 10:21 AM - 10/17/18
To be clear, ALL of the curves I posted are there to be used with Aim Assist ON. I wouldn't use a curve if you have Aim Assist off.

I'm using the Active curve with ADS only! NO curve on Hip.

@milkman - I like your pic man, are you a Vet? Also, is that Virginia? I have property in Virginia, your pic reminds me of the peace I have back home. (I have two residencies, one is serene "country" the other is chaos "city life")

Your pic makes me miss my dog too Lol... she's out in the country. I'd never have a dog in my condo in the city.
Title: Re: BO4 My Advanced Setup/Advice
Post by: adiman1992 on 11:08 AM - 10/17/18
Do u have for xim4?
Title: Re: BO4 My Advanced Setup/Advice
Post by: RML on 12:24 PM - 10/17/18
^ Sry I DONOT have a XIM4 anymore.
Title: Re: BO4 My Advanced Setup/Advice
Post by: Kivansh on 12:29 PM - 10/17/18
thanks for the topic and full detail!

i'm facing problem with the curves, i'm kinda of brand new of all this.
every time i start copy the code for curves and paste it into my app(using iphone 10)
it says ERROR and the ballastic curve line stay same thing

i start copy after (>>>) and finish before (<<<<)
what am i doing wrong?

btw i havent used ur settings yet, i will use today
but my current settings is
mouse g900 dpi 12k
hip 15.5
ads 7
game AA on
no curves.
(yes i'm facing hell when riding vehicle or KS or wingsuit)
but my problem is everytime i walk FORWARD with keybind(W)
the character slightly go to the right a little bit i mean another example (like a car need alignment lol)
what the best solution for this? before i use your settings and thanks in Advance
Title: Re: BO4 My Advanced Setup/Advice
Post by: Trshy on 12:54 PM - 10/17/18
thanks for the topic and full detail!

i'm facing problem with the curves, i'm kinda of brand new of all this.
every time i start copy the code for curves and paste it into my app(using iphone 10)
it says ERROR and the ballastic curve line stay same thing

i start copy after (>>>) and finish before (<<<<)
what am i doing wrong?

btw i havent used ur settings yet, i will use today
but my current settings is
mouse g900 dpi 12k
hip 15.5
ads 7
game AA on
no curves.
(yes i'm facing hell when riding vehicle or KS or wingsuit)
but my problem is everytime i walk FORWARD with keybind(W)
the character slightly go to the right a little bit i mean another example (like a car need alignment lol)
what the best solution for this? before i use your settings and thanks in Advance

you need to copy everything, even the (<) and the  (>)
Title: Re: BO4 My Advanced Setup/Advice
Post by: Kivansh on 01:11 PM - 10/17/18
thanks for the topic and full detail!

i'm facing problem with the curves, i'm kinda of brand new of all this.
every time i start copy the code for curves and paste it into my app(using iphone 10)
it says ERROR and the ballastic curve line stay same thing

i start copy after (>>>) and finish before (<<<<)
what am i doing wrong?

btw i havent used ur settings yet, i will use today
but my current settings is
mouse g900 dpi 12k
hip 15.5
ads 7
game AA on
no curves.
(yes i'm facing hell when riding vehicle or KS or wingsuit)
but my problem is everytime i walk FORWARD with keybind(W)
the character slightly go to the right a little bit i mean another example (like a car need alignment lol)
what the best solution for this? before i use your settings and thanks in Advance

you need to copy everything, even the (<) and the  (>)


thanks for reply mate,

1)

 >>> XIM APEX [RML - BLACKOUT 60FPS] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<



2)

 START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1ABAgMEFQX26AnMjIyMjIyMjIyMjI:X4MB<<< XIM4 END PASTE <<<


3)


>>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1ABAgMEFQX26AnMjIyMjIyMjIyMjI:X4MB<<<






WHICH one?
Title: Re: BO4 My Advanced Setup/Advice
Post by: MattBrady on 01:24 PM - 10/17/18
RML are these settings you use mainly for Blackout or do you play Multiplayer aswell with them? Will they work aswell for MP?
Title: Re: BO4 My Advanced Setup/Advice
Post by: RML on 02:51 PM - 10/17/18
RML are these settings you use mainly for Blackout or do you play Multiplayer aswell with them? Will they work aswell for MP?

They work great for me with all game modes. I actually made the ADS curve along time ago for XIM4 and it works for pretty much ANY FPS game that has heavy Aim Assist. I just transferred it over to APEX. Originally it was created in COD multiplayer FFA and TDM. 
Title: Re: BO4 My Advanced Setup/Advice
Post by: JDM on 02:54 PM - 10/17/18
RML do you wanna get off Trash Box and join us PlayStation GODS?

We would take you in with open arms  :)
Title: Re: BO4 My Advanced Setup/Advice
Post by: RML on 02:58 PM - 10/17/18
RML do you wanna get off Trash Box and join us PlayStation GODS?

We would take you in with open arms  :)

All my friends and Family are on Xbox. Besides, have you seen the new Avatars?

LMAO... They're pretty dope!  :P

Sony just needs to get off their High Horse and allow cross play!
Title: Re: BO4 My Advanced Setup/Advice
Post by: antithesis on 03:12 PM - 10/17/18
Sony just needs to get off their High Horse and allow cross play!
It's not a horse, it's an Aibo. And no, you can't have one you dirty Xbox player you.

New avatars you say? I don't boot my XB1 up often enough to notice.
Title: Re: BO4 My Advanced Setup/Advice
Post by: Nicktyler222 on 03:19 PM - 10/17/18
RML do you wanna get off Trash Box and join us PlayStation GODS?

We would take you in with open arms  :)

All my friends and Family are on Xbox. Besides, have you seen the new Avatars?

LMAO... They're pretty dope!  :P

Sony just needs to get off their High Horse and allow cross play!

You stay right at home where you belong RML, on the box, with us, your people.  :)
Title: Re: BO4 My Advanced Setup/Advice
Post by: Trshy on 05:00 PM - 10/17/18
thanks for the topic and full detail!

i'm facing problem with the curves, i'm kinda of brand new of all this.
every time i start copy the code for curves and paste it into my app(using iphone 10)
it says ERROR and the ballastic curve line stay same thing

i start copy after (>>>) and finish before (<<<<)
what am i doing wrong?

btw i havent used ur settings yet, i will use today
but my current settings is
mouse g900 dpi 12k
hip 15.5
ads 7
game AA on
no curves.
(yes i'm facing hell when riding vehicle or KS or wingsuit)
but my problem is everytime i walk FORWARD with keybind(W)
the character slightly go to the right a little bit i mean another example (like a car need alignment lol)
what the best solution for this? before i use your settings and thanks in Advance

you need to copy everything, even the (<) and the  (>)


thanks for reply mate,

1)

 >>> XIM APEX [RML - BLACKOUT 60FPS] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<



2)

 START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1ABAgMEFQX26AnMjIyMjIyMjIyMjI:X4MB<<< XIM4 END PASTE <<<


3)


>>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1ABAgMEFQX26AnMjIyMjIyMjIyMjI:X4MB<<<






WHICH one?

#2
Title: Re: BO4 My Advanced Setup/Advice
Post by: JDM on 06:32 PM - 10/17/18
Sony just needs to get off their High Horse and allow cross play!
It's not a horse, it's an Aibo. And no, you can't have one you dirty Xbox player you.

New avatars you say? I don't boot my XB1 up often enough to notice.

X what? I didnít even love my x girlfriend, how can anyone love an x-box? wHatttt!!?

Right antithesis?

What kind of **** is that.
Title: Re: BO4 My Advanced Setup/Advice
Post by: Jackedup Jonesy on 06:46 PM - 10/17/18
Thanks, RML.

Having great success after modifying this to 4k DPI and adjusting everything to a sensitivity that works for me. The ADS curve feels awesome.

I've mostly been a lurker here the last four years. But I really appreciate all the good work you do here. Your work on this and Destiny have really made these games enjoyable on console for me.

I just ended on a 13 kill duos win before typing this up and here are the three games before it and clip of one of the wins:


(https://lh3.googleusercontent.com/5PCa5kLxYLNnd5iGKqWs4-jlwGeEQzdwQBKwokdjT1YEWX_KjKBV65xTxHVtcgRn1N7hfBTAfV69EgFmPt06sc6cXugZVPOnhla7QLRGKQ1ppbIJZgN7MxPaMDhkc-08nUHM4BwqIiyBeuLxGNoXiGBncLw01pqGmGZ_S1ExZiV_jfQfe5U0jhMYYByowRgVbuJX1t49Aq4l6JEvKANSfUiE3bLQ2G2YF0l4VinqBFjgpbJatzI3wDVPh-o3LBVdNg-fCMT-82sD_GVPpBXYxklLyNi66bV_gpKf7f7JdlpQzssPxLwRB5SolhV8bhFhVGR0WHrc2xxZA6KUupYhM5PPHXr1Saf7zGe6X1zmST6D6im9JeWDP3rx6XA6RJ_9aseN2LEZYVl_4Fom6E4vjmwtdspCf4A2XHnViJtP86Ns-g5Fr-eE9ZmUZ1U7AZnino5BQmjLpV0e3wEbgMe-0vO-53huk0dlYfDexVZtqvi9LB8NewEgvYEGaFwph_ozRynLkTqCEhtsFkD_D5JMQN0-FQAlqp4qtpEUMUZ3bxf1vz94oCXwhooCFcusRcsIJQZHg4cj68k6pkaJ-RX2ZALYk5AE3P2mBgbxZWsGYE_fnnQt_dYCeSiw0cBSEM8=w1140-h776-no)

https://xboxdvr.com/gamer/jackedup-jonesy/video/62173820
Title: Re: BO4 My Advanced Setup/Advice
Post by: sbfx on 07:27 PM - 10/17/18
Hey RML,
Thanks for the settings, they feel great already.

Question for you - do you use a separate sens and curve for multiplayer vs. blackout mode? Do you have any recommendations there?

I understand in multiplayer there will be a lot more close encounters so adjustments could be necessary.

Any settings in particular that are working better for multiplayer vs. blackout for you so far?
Title: Re: BO4 My Advanced Setup/Advice
Post by: YeaItsMe on 07:45 PM - 10/17/18
I don't know what it is but I just can't run APEX at max dpi (12,000/hard-pad). Its like that with Fortnite and now in BO4...on the move going from hip to ads I can hit the mark maybe 7 out of 10 times. I can't stand having to make micro adjustments...leads to too many deaths.

For me...

G502 3,000 DPI... Polling 500...Cloth Pad
BO4 ST
XIM APEX Polling 500
SYNC COMMON
HIP Sens - 20
ADS Sens - 8 - AA curve active


Really liking the curve. The only time I notice ANY issues with AA bubbles, is every once in awhile when someone sprint slides across my screen. I can't always get out in front with the reticle. But again, doesn't happen often.
Title: Re: BO4 My Advanced Setup/Advice
Post by: JamesCaywood on 08:23 PM - 10/17/18
Got it working nice going to try it out now
Title: Re: BO4 My Advanced Setup/Advice
Post by: JDM on 08:52 PM - 10/17/18
I don't know what it is but I just can't run APEX at max dpi (12,000/hard-pad). Its like that with Fortnite and now in BO4...on the move going from hip to ads I can hit the mark maybe 7 out of 10 times. I can't stand having to make micro adjustments...leads to too many deaths.

For me...

G502 3,000 DPI... Polling 500...Cloth Pad
BO4 ST
XIM APEX Polling 500
SYNC COMMON
HIP Sens - 20
ADS Sens - 8 - AA curve active


Really liking the curve. The only time I notice ANY issues with AA bubbles, is every once in awhile when someone sprint slides across my screen. I can't always get out in front with the reticle. But again, doesn't happen often.

Yeah, when my Rival 600 comes, Iím going to try 800 dpi, a good player ( Legit Shooter ) uses this setup on the same mouse pad I use and doesnít seem to be having any issues + he plays really good and with the Nav controller, as do I.

Iím not sure but, I think with xim, it doesnít matter as much for the mouses dpi, which material of mouse pad you use due to the fact you have the ingame sensitivity ( which needs to be max ) and then the dpi which is normal and then the Xim sensitivity which kinda controls it all. So I feel like mouse pad is just preference of how it feels for Xim over performance.

Title: Re: BO4 My Advanced Setup/Advice
Post by: another1ne on 09:07 PM - 10/17/18
between the LESS AA and the ACTIVE AA how much roughly did u lower your sensitivity in hip. (from less to the active.)
Title: Re: BO4 My Advanced Setup/Advice
Post by: milkman on 12:50 AM - 10/18/18

@milkman - I like your pic man, are you a Vet? Also, is that Virginia? I have property in Virginia, your pic reminds me of the peace I have back home. (I have two residencies, one is serene "country" the other is chaos "city life")

Your pic makes me miss my dog too Lol... she's out in the country. I'd never have a dog in my condo in the city.

Just hanging out in my backyard with my buddy Tank on the 4th of July in South Florida. I'm not a Veteran but my son is deployed "Air Force". We keep in touch while gaming, he's good with the controller and I'm good with the M&K "thanks to your setups and the xim apex" lol..
Keep up the good work!
Thank you.
Title: Re: BO4 My Advanced Setup/Advice
Post by: duvdvn on 03:31 AM - 10/18/18
@RML

Hello again,

1. Are you using X\Y or Smoothing?

2. I don't understood this sentence : "Wing Suit/Vehicle/KS Profile Sens - 15 or approx. 3x's HIP sens (Curve Active, also utilize Turn Assist)"

Should i have to open new profile for the battle royal or put it in the Auxiliry?

and what sens in the hip \ ads on the battle royal wings mode?


Thanks
Title: Re: BO4 My Advanced Setup/Advice
Post by: RML on 09:32 AM - 10/18/18
You stay right at home where you belong RML, on the box, with us, your people.  :)

I have no loyalty's to consoles, just friends and family, so I'm not going anywhere.  ;)


Thanks, RML.

Having great success after modifying this to 4k DPI and adjusting everything to a sensitivity that works for me. The ADS curve feels awesome.

I've mostly been a lurker here the last four years. But I really appreciate all the good work you do here. Your work on this and Destiny have really made these games enjoyable on console for me.

I just ended on a 13 kill duos win before typing this up and here are the three games before it and clip of one of the wins:


(https://lh3.googleusercontent.com/5PCa5kLxYLNnd5iGKqWs4-jlwGeEQzdwQBKwokdjT1YEWX_KjKBV65xTxHVtcgRn1N7hfBTAfV69EgFmPt06sc6cXugZVPOnhla7QLRGKQ1ppbIJZgN7MxPaMDhkc-08nUHM4BwqIiyBeuLxGNoXiGBncLw01pqGmGZ_S1ExZiV_jfQfe5U0jhMYYByowRgVbuJX1t49Aq4l6JEvKANSfUiE3bLQ2G2YF0l4VinqBFjgpbJatzI3wDVPh-o3LBVdNg-fCMT-82sD_GVPpBXYxklLyNi66bV_gpKf7f7JdlpQzssPxLwRB5SolhV8bhFhVGR0WHrc2xxZA6KUupYhM5PPHXr1Saf7zGe6X1zmST6D6im9JeWDP3rx6XA6RJ_9aseN2LEZYVl_4Fom6E4vjmwtdspCf4A2XHnViJtP86Ns-g5Fr-eE9ZmUZ1U7AZnino5BQmjLpV0e3wEbgMe-0vO-53huk0dlYfDexVZtqvi9LB8NewEgvYEGaFwph_ozRynLkTqCEhtsFkD_D5JMQN0-FQAlqp4qtpEUMUZ3bxf1vz94oCXwhooCFcusRcsIJQZHg4cj68k6pkaJ-RX2ZALYk5AE3P2mBgbxZWsGYE_fnnQt_dYCeSiw0cBSEM8=w1140-h776-no)

https://xboxdvr.com/gamer/jackedup-jonesy/video/62173820


Thanks Jonesy, I always appreciate the feedback. Especially when you include stats. I'm glad it's helped.



Hey RML,
Thanks for the settings, they feel great already.

Question for you - do you use a separate sens and curve for multiplayer vs. blackout mode? Do you have any recommendations there?

I understand in multiplayer there will be a lot more close encounters so adjustments could be necessary.

Any settings in particular that are working better for multiplayer vs. blackout for you so far?

Hello sbfx, I spent some time last night playing TDM and I've actually toned my sens down just a little bit overall as a result. I find that these settings work best across all game modes. The only change I've implemented is a "Steady Aim" Alternate ADS for long range sniping in Blackout. If you copy/paste my full config you can find it there. I may add pics ets. to the OP eventually to help out XIM4 users. Other then the Steady Aim profile, I use the exact same settings for all game modes.




@milkman - I like your pic man, are you a Vet? Also, is that Virginia? I have property in Virginia, your pic reminds me of the peace I have back home. (I have two residencies, one is serene "country" the other is chaos "city life")

Your pic makes me miss my dog too Lol... she's out in the country. I'd never have a dog in my condo in the city.

Just hanging out in my backyard with my buddy Tank on the 4th of July in South Florida. I'm not a Veteran but my son is deployed "Air Force". We keep in touch while gaming, he's good with the controller and I'm good with the M&K "thanks to your setups and the xim apex" lol..
Keep up the good work!
Thank you.


That's Awesome man! Your response that my setup helps you game with your deployed son is probably one of my favorite recognition's of all time. From one Vet to another, please thank your son (from me) for his service. BTW, Tank is an awesome name, lol... God speed!



@RML

Hello again,

1. Are you using X\Y or Smoothing?

2. I don't understood this sentence : "Wing Suit/Vehicle/KS Profile Sens - 15 or approx. 3x's HIP sens (Curve Active, also utilize Turn Assist)"

Should i have to open new profile for the battle royal or put it in the Auxiliry?

and what sens in the hip \ ads on the battle royal wings mode?


Thanks


1. I'm currently not changing X/Y ratio. I do currently have smooth aim transition on and ADS delay set to 125.

2. This is an aux. profile that utilizes higher sens and Turn Assist to help control the Wing suit and Vehicles in Blackout. I also use it in multiplayer for certain Kill streaks that turn slower then Hip.







 
 
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/18/18)
Post by: RML on 09:38 AM - 10/18/18
Updated the following on OP

HIP - 4.2
ADS - 1.95
ADS delay - 125
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/18/18)
Post by: Taktikz on 09:45 AM - 10/18/18
Updated the following on OP

HIP - 4.2
ADS - 1.95
ADS delay - 125

Hey RML, I am using 12K DPI on XIM4, same mouse as you, will the HIP and ADS sensitivities be the same for me on the XIM4 as you use on the APEX?


Also do you use cloth or hard pad? I have both but I find cloth pad easier for this game. Sorry for the 20 questions :)
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/18/18)
Post by: Redrabbit5 on 10:06 AM - 10/18/18
Updated the following on OP

HIP - 4.2
ADS - 1.95
ADS delay - 125

Thanks for the awesome work !!

What firmware are you using on apex ?
Title: Re: BO4 My Advanced Setup/Advice
Post by: biro1 on 11:05 AM - 10/18/18
Thanks, RML.

Having great success after modifying this to 4k DPI and adjusting everything to a sensitivity that works for me. The ADS curve feels awesome.

I've mostly been a lurker here the last four years. But I really appreciate all the good work you do here. Your work on this and Destiny have really made these games enjoyable on console for me.

I just ended on a 13 kill duos win before typing this up and here are the three games before it and clip of one of the wins:


(https://lh3.googleusercontent.com/5PCa5kLxYLNnd5iGKqWs4-jlwGeEQzdwQBKwokdjT1YEWX_KjKBV65xTxHVtcgRn1N7hfBTAfV69EgFmPt06sc6cXugZVPOnhla7QLRGKQ1ppbIJZgN7MxPaMDhkc-08nUHM4BwqIiyBeuLxGNoXiGBncLw01pqGmGZ_S1ExZiV_jfQfe5U0jhMYYByowRgVbuJX1t49Aq4l6JEvKANSfUiE3bLQ2G2YF0l4VinqBFjgpbJatzI3wDVPh-o3LBVdNg-fCMT-82sD_GVPpBXYxklLyNi66bV_gpKf7f7JdlpQzssPxLwRB5SolhV8bhFhVGR0WHrc2xxZA6KUupYhM5PPHXr1Saf7zGe6X1zmST6D6im9JeWDP3rx6XA6RJ_9aseN2LEZYVl_4Fom6E4vjmwtdspCf4A2XHnViJtP86Ns-g5Fr-eE9ZmUZ1U7AZnino5BQmjLpV0e3wEbgMe-0vO-53huk0dlYfDexVZtqvi9LB8NewEgvYEGaFwph_ozRynLkTqCEhtsFkD_D5JMQN0-FQAlqp4qtpEUMUZ3bxf1vz94oCXwhooCFcusRcsIJQZHg4cj68k6pkaJ-RX2ZALYk5AE3P2mBgbxZWsGYE_fnnQt_dYCeSiw0cBSEM8=w1140-h776-no)

https://xboxdvr.com/gamer/jackedup-jonesy/video/62173820

Hello josney, are you in 1000hz 4000dpi or 500hz 4000dpi?

What mouse and keyboard do you use?

Can you share your HIP and your ads? I would also like to get off my HIP I lack precision in 12k dpi 1000hZ on my G502.
Title: Re: BO4 My Advanced Setup/Advice
Post by: biro1 on 11:52 AM - 10/18/18
Thanks, RML.

Having great success after modifying this to 4k DPI and adjusting everything to a sensitivity that works for me. The ADS curve feels awesome.

I've mostly been a lurker here the last four years. But I really appreciate all the good work you do here. Your work on this and Destiny have really made these games enjoyable on console for me.

I just ended on a 13 kill duos win before typing this up and here are the three games before it and clip of one of the wins:


(https://lh3.googleusercontent.com/5PCa5kLxYLNnd5iGKqWs4-jlwGeEQzdwQBKwokdjT1YEWX_KjKBV65xTxHVtcgRn1N7hfBTAfV69EgFmPt06sc6cXugZVPOnhla7QLRGKQ1ppbIJZgN7MxPaMDhkc-08nUHM4BwqIiyBeuLxGNoXiGBncLw01pqGmGZ_S1ExZiV_jfQfe5U0jhMYYByowRgVbuJX1t49Aq4l6JEvKANSfUiE3bLQ2G2YF0l4VinqBFjgpbJatzI3wDVPh-o3LBVdNg-fCMT-82sD_GVPpBXYxklLyNi66bV_gpKf7f7JdlpQzssPxLwRB5SolhV8bhFhVGR0WHrc2xxZA6KUupYhM5PPHXr1Saf7zGe6X1zmST6D6im9JeWDP3rx6XA6RJ_9aseN2LEZYVl_4Fom6E4vjmwtdspCf4A2XHnViJtP86Ns-g5Fr-eE9ZmUZ1U7AZnino5BQmjLpV0e3wEbgMe-0vO-53huk0dlYfDexVZtqvi9LB8NewEgvYEGaFwph_ozRynLkTqCEhtsFkD_D5JMQN0-FQAlqp4qtpEUMUZ3bxf1vz94oCXwhooCFcusRcsIJQZHg4cj68k6pkaJ-RX2ZALYk5AE3P2mBgbxZWsGYE_fnnQt_dYCeSiw0cBSEM8=w1140-h776-no)

https://xboxdvr.com/gamer/jackedup-jonesy/video/62173820

Hello josney, are you in 1000hz 4000dpi or 500hz 4000dpi?

What mouse and keyboard do you use?

Can you share your HIP and your ads? I would also like to get off my HIP I lack precision in 12k dpi 1000hZ on my G502.

and syncro default or common?
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/18/18)
Post by: Jasjoe1991 on 03:22 PM - 10/18/18
which profile is the sniping profile?
Title: Re: BO4 My Advanced Setup/Advice
Post by: TroyMuni on 03:34 PM - 10/18/18
thanks for the topic and full detail!

i'm facing problem with the curves, i'm kinda of brand new of all this.
every time i start copy the code for curves and paste it into my app(using iphone 10)
it says ERROR and the ballastic curve line stay same thing

i start copy after (>>>) and finish before (<<<<)
what am i doing wrong?

btw i havent used ur settings yet, i will use today
but my current settings is
mouse g900 dpi 12k
hip 15.5
ads 7
game AA on
no curves.
(yes i'm facing hell when riding vehicle or KS or wingsuit)
but my problem is everytime i walk FORWARD with keybind(W)
the character slightly go to the right a little bit i mean another example (like a car need alignment lol)
what the best solution for this? before i use your settings and thanks in Advance

you need to copy everything, even the (<) and the  (>)

I can't get it to work either.  I've tried everything from selecting the entire thing to a single < to <<< and it keeps saying error.  I'm going nuts trying to get this to work.  I'm new to this so I'm sure I don't understand something and doing something wrong.  If anyone could help clarify what I'm doing wrong or suggestions that would be great.  I've got a new XIM Apex and downloaded the app onto a iPhone 8s with the current firmware updated on everything.
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/18/18)
Post by: RML on 03:43 PM - 10/18/18
which profile is the sniping profile?

It's entitled "Steady Aim"

The one right after Wing N IT  :P
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/18/18)
Post by: TroyMuni on 04:05 PM - 10/18/18
Can anyone please tell me what I may be doing wrong?  Which one of his RML code links should I be copying into the ADS ballistic curve?  This is driving me crazy.  I've tried just hitting paste when I open up the graph and also tried pasting it into the - + field...keeps saying error.  I have no idea what I'm supposed to be doing with this.

If I copy what I have there in ADS ballistics (default), this is what I'm seeing:

>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:AAAAyAGQAlgDIAPoBLAFeAZABwgH0AiYCWAKKArwC7gMgA1IDhAO2A+gEGgRMBH4EsATiBRQFRgV4BaoF3AYOBkAGcgakBtYHCAc6B2wHngfQCAIINAhmCJgIygj8CS4JYAmSCcQ:X5BC
<<< XIM APEX END COPY <<<
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/18/18)
Post by: TroyMuni on 04:23 PM - 10/18/18
I think I figured it out.  I'm sure there are other people having the same issue that are new to this.  The only set of code that works in the ADS ballistic curve is his 3rd one:

>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:AACBVIKKg+iFRoakiDSJxIsijICNrI7Yj9KQzJHGko6TiJSClXyWj5e7mQCakJy2n1mil6cQJxAnECcQJxAnECcQJxAnECcQJxAnECcQJxAnECcQJxAnECcQJxAnECcQJxAnECcQ:X5BC
<<< XIM APEX END COPY <<<

I still have no idea where to enter in the first part that he references as "full configuration".  I'm also not sure why there is code referenced as XIM4 since he says this is all for Apex.  Sorry, I'm just very confused and frustrated from trying to figure this all out and not having any experience with this before.
Title: Re: BO4 My Advanced Setup/Advice
Post by: Jackedup Jonesy on 04:46 PM - 10/18/18
Thanks, RML.

Having great success after modifying this to 4k DPI and adjusting everything to a sensitivity that works for me. The ADS curve feels awesome.

I've mostly been a lurker here the last four years. But I really appreciate all the good work you do here. Your work on this and Destiny have really made these games enjoyable on console for me.

I just ended on a 13 kill duos win before typing this up and here are the three games before it and clip of one of the wins:


(https://lh3.googleusercontent.com/5PCa5kLxYLNnd5iGKqWs4-jlwGeEQzdwQBKwokdjT1YEWX_KjKBV65xTxHVtcgRn1N7hfBTAfV69EgFmPt06sc6cXugZVPOnhla7QLRGKQ1ppbIJZgN7MxPaMDhkc-08nUHM4BwqIiyBeuLxGNoXiGBncLw01pqGmGZ_S1ExZiV_jfQfe5U0jhMYYByowRgVbuJX1t49Aq4l6JEvKANSfUiE3bLQ2G2YF0l4VinqBFjgpbJatzI3wDVPh-o3LBVdNg-fCMT-82sD_GVPpBXYxklLyNi66bV_gpKf7f7JdlpQzssPxLwRB5SolhV8bhFhVGR0WHrc2xxZA6KUupYhM5PPHXr1Saf7zGe6X1zmST6D6im9JeWDP3rx6XA6RJ_9aseN2LEZYVl_4Fom6E4vjmwtdspCf4A2XHnViJtP86Ns-g5Fr-eE9ZmUZ1U7AZnino5BQmjLpV0e3wEbgMe-0vO-53huk0dlYfDexVZtqvi9LB8NewEgvYEGaFwph_ozRynLkTqCEhtsFkD_D5JMQN0-FQAlqp4qtpEUMUZ3bxf1vz94oCXwhooCFcusRcsIJQZHg4cj68k6pkaJ-RX2ZALYk5AE3P2mBgbxZWsGYE_fnnQt_dYCeSiw0cBSEM8=w1140-h776-no)

https://xboxdvr.com/gamer/jackedup-jonesy/video/62173820

Hello josney, are you in 1000hz 4000dpi or 500hz 4000dpi?

What mouse and keyboard do you use?

Can you share your HIP and your ads? I would also like to get off my HIP I lack precision in 12k dpi 1000hZ on my G502.

and syncro default or common?

4000 DPI, 1000HZ
Keyboard: G513
Mouse: G502
HIP: 9.5 (Common)
ADS:5.6 (Common)
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/18/18)
Post by: another1ne on 05:00 PM - 10/18/18
Anyone know why on steady aim there is no curve? i feel like you want an extreme curve when you snipe cause the aim assist is so locked on its crazYYY
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/18/18)
Post by: Nicktyler222 on 05:32 PM - 10/18/18
I think I figured it out.  I'm sure there are other people having the same issue that are new to this.  The only set of code that works in the ADS ballistic curve is his 3rd one:

>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:AACBVIKKg+iFRoakiDSJxIsijICNrI7Yj9KQzJHGko6TiJSClXyWj5e7mQCakJy2n1mil6cQJxAnECcQJxAnECcQJxAnECcQJxAnECcQJxAnECcQJxAnECcQJxAnECcQJxAnECcQ:X5BC
<<< XIM APEX END COPY <<<

I still have no idea where to enter in the first part that he references as "full configuration".  I'm also not sure why there is code referenced as XIM4 since he says this is all for Apex.  Sorry, I'm just very confused and frustrated from trying to figure this all out and not having any experience with this before.

You paste the full config on the first page, before Hip, where you chose the color and edit the name of the config. Make sure advanced options are on in case they are needed, then on that page click the three dots (...) to pull up the copy/paste options
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/18/18)
Post by: mcdonamw on 06:05 PM - 10/18/18
Digging the active curve, thanks for that RML, but I have to ask, what is the driving force for such a curve?  I don't understand why one would want this kind of wave throughout their aim.  My curves usually follow more of a linear or parabolic upward trend but not following the S curve you got going on.
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/18/18)
Post by: RML on 07:15 PM - 10/18/18
I think I figured it out.  I'm sure there are other people having the same issue that are new to this.  The only set of code that works in the ADS ballistic curve is his 3rd one:

>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:AACBVIKKg+iFRoakiDSJxIsijICNrI7Yj9KQzJHGko6TiJSClXyWj5e7mQCakJy2n1mil6cQJxAnECcQJxAnECcQJxAnECcQJxAnECcQJxAnECcQJxAnECcQJxAnECcQJxAnECcQ:X5BC
<<< XIM APEX END COPY <<<

I still have no idea where to enter in the first part that he references as "full configuration".  I'm also not sure why there is code referenced as XIM4 since he says this is all for Apex.  Sorry, I'm just very confused and frustrated from trying to figure this all out and not having any experience with this before.

The only thing that is ONLY for APEX is the Full Configuration code. All the ADS curves are posted for Apex and Xim4. Is this not clear in the thread? Anyone else getting confused by this?


Digging the active curve, thanks for that RML, but I have to ask, what is the driving force for such a curve?  I don't understand why one would want this kind of wave throughout their aim.  My curves usually follow more of a linear or parabolic upward trend but not following the S curve you got going on.

Because it's soooo smooth!  8)

In all seriousness, I've tried creating this with straight lines and it just doesn't feel right. The curve is shaped that way to push through the AA bubble at different ranges of engagement. Mid to long you don't move your mouse as fast and therefore won't get as much acceleration. Short range, fast movement will give you a lot of acceleration.
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/18/18)
Post by: RML on 07:21 PM - 10/18/18
Anyone know why on steady aim there is no curve? i feel like you want an extreme curve when you snipe cause the aim assist is so locked on its crazYYY

Steady Aim was only meant for long range PRECISION shots on BLACKOUT. These types of shots have very little to no Aim Assist, which is why I've removed the curve.
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/18/18)
Post by: another1ne on 07:27 PM - 10/18/18
Anyone know why on steady aim there is no curve? i feel like you want an extreme curve when you snipe cause the aim assist is so locked on its crazYYY

Steady Aim was only meant for long range PRECISION shots on BLACKOUT. These types of shots have very little to no Aim Assist, which is why I've removed the curve.


makes sense but seems like everytime i scope in for those shots i have a hard time moving it to them because it slows down so much but makes sense! i cant decide which curve i like more for blackout between active and LESS
Title: Re: BO4 My Advanced Setup/Advice
Post by: biro1 on 01:32 AM - 10/19/18
Thanks, RML.

Having great success after modifying this to 4k DPI and adjusting everything to a sensitivity that works for me. The ADS curve feels awesome.

I've mostly been a lurker here the last four years. But I really appreciate all the good work you do here. Your work on this and Destiny have really made these games enjoyable on console for me.

I just ended on a 13 kill duos win before typing this up and here are the three games before it and clip of one of the wins:


(https://lh3.googleusercontent.com/5PCa5kLxYLNnd5iGKqWs4-jlwGeEQzdwQBKwokdjT1YEWX_KjKBV65xTxHVtcgRn1N7hfBTAfV69EgFmPt06sc6cXugZVPOnhla7QLRGKQ1ppbIJZgN7MxPaMDhkc-08nUHM4BwqIiyBeuLxGNoXiGBncLw01pqGmGZ_S1ExZiV_jfQfe5U0jhMYYByowRgVbuJX1t49Aq4l6JEvKANSfUiE3bLQ2G2YF0l4VinqBFjgpbJatzI3wDVPh-o3LBVdNg-fCMT-82sD_GVPpBXYxklLyNi66bV_gpKf7f7JdlpQzssPxLwRB5SolhV8bhFhVGR0WHrc2xxZA6KUupYhM5PPHXr1Saf7zGe6X1zmST6D6im9JeWDP3rx6XA6RJ_9aseN2LEZYVl_4Fom6E4vjmwtdspCf4A2XHnViJtP86Ns-g5Fr-eE9ZmUZ1U7AZnino5BQmjLpV0e3wEbgMe-0vO-53huk0dlYfDexVZtqvi9LB8NewEgvYEGaFwph_ozRynLkTqCEhtsFkD_D5JMQN0-FQAlqp4qtpEUMUZ3bxf1vz94oCXwhooCFcusRcsIJQZHg4cj68k6pkaJ-RX2ZALYk5AE3P2mBgbxZWsGYE_fnnQt_dYCeSiw0cBSEM8=w1140-h776-no)

https://xboxdvr.com/gamer/jackedup-jonesy/video/62173820

Hello josney, are you in 1000hz 4000dpi or 500hz 4000dpi?

What mouse and keyboard do you use?

Can you share your HIP and your ads? I would also like to get off my HIP I lack precision in 12k dpi 1000hZ on my G502.

and syncro default or common?

4000 DPI, 1000HZ
Keyboard: G513
Mouse: G502
HIP: 9.5 (Common)
ADS:5.6 (Common)
Thx friend
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/18/18)
Post by: InZaneHD on 03:00 AM - 10/19/18
Hi, good work on this one RML creds to you! Question: I am always using toggle ads not hold to ads. Will this cause any problems with your settings? And is ads delay neccessary? Sry for bad english
(And if anyone on the Xbox want to play some blackout on EU server, feel free to add me GT: LnZane HD or msg me here)
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/18/18)
Post by: Taktikz on 04:08 AM - 10/19/18
RML, dunno if you saw my previous message, but would my sensitivities be the same as yours if I'm using the XIM4? I use 12K DPI too.
And do you use cloth or hard pad. Finding cloth better for this game.
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/18/18)
Post by: destined1ne on 05:07 AM - 10/19/18
I love this config! Thanks for sharing.
The only thing is that the gliding/wingsuit is still slow for me. Any advice?
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/18/18)
Post by: RML on 06:45 AM - 10/19/18
Hi, good work on this one RML creds to you! Question: I am always using toggle ads not hold to ads. Will this cause any problems with your settings? And is ads delay neccessary? Sry for bad english
(And if anyone on the Xbox want to play some blackout on EU server, feel free to add me GT: LnZane HD or msg me here)

Toggle won't be an issue, ADS delay can help with smoothing out the transition from HIP to ADS. COD is the only game on the market that uses an ADS delay that I'm aware of. What it does is the game has Two built in look mechanics, one for HIP and one for ADS. The transition from Hip to ADS has a delay built in and this delay will vary depending on what weapon/attachments you have equipped. So when you click the button to ADS the game waits a certain amount of time before changing the look mech. We have to manually try to figure this out by entering a delay setting. We do this because HIP and ADS are different. So if you transition from the Hip Translator to the ADS translator before or after the game mechanic has already transitioned, you may experience a sudden slowdown or lurch in movement, depending on your HIP vs. ADS sensitivity. So the goal here is to have your XIM transition from the HIP ST to the ADS ST at the same time as the games built in look mechanic. Hope that makes sense! Ugh.... lol



RML, dunno if you saw my previous message, but would my sensitivities be the same as yours if I'm using the XIM4? I use 12K DPI too.
And do you use cloth or hard pad. Finding cloth better for this game.


Hey Taktikz, I missed it sry. The answer is no, I'm playing on Common settings (60fps) XIM4 runs at 125. So you'll have to pretty much double your sensitivity. Also I'm using 1000hz. I don't know if that's still an issue when compared to 125hz. or if OBsIV fixed that. I haven't strayed from 1000hz. since last year during testing. Maybe others that alternate more can answer. I think it would be pretty obvious though if your sensitivity feels really slow or fast. Then it's out of whack!



I love this config! Thanks for sharing.
The only thing is that the gliding/wingsuit is still slow for me. Any advice?

Are you utilizing Turn Assist? If you are and you're still not happy then raise your sensitivity until it feels better. However, you cannot exceed the games built in turn speed limit. So at some point, that's as fast as you're going to get. Your XIM will tell you by Flashing red insanely fast!


I'm adding A new trick I use for fast menu navigation to the OP. After using these settings for a few hours (yes I had to get used to it) I can honestly say, It's a game changer if you haven't been using the quick menu in the past.

IDK maybe I'm late to the party Lol.. but I was always doing one of two things when looting.

1. Pick it up and then at some point hit the menu button "Start" and then stand there while I equip or attach the item.
2. Change my weapon and then pick up the attachment so that it would automatically attach to the weapon that I wanted.

Either way I was wasting valuable looting time and often standing around going through my inventory like a sitting duck! I've now fixed that by finally finding a button combination that works well for me to use the quick menu.

So here it is. I'm using the G502.

Scroll Up = Dpad up
Scroll wheel right = Dpad right
Scroll Wheel Left = Dpad left
Forward Button = Dpad down

This allows me to control the quick navigation menu without standing around like an idiot! I can manipulate my entire inventory while running around the map. The only thing you CANNOT do is pick up more Loot while the quick menu is open.

This is a game changer folks. If you haven't been doing this, DO IT!!

CHEERS!
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: neopaxxx on 10:14 AM - 10/19/18
The mouse wheel right and left click (pan?) works not correctly with my g502. It seems that there is a type of delay after clicking, I canít switch fast between right and left.
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: Gaben22 on 01:26 PM - 10/19/18
The mouse wheel right and left click (pan?) works not correctly with my g502. It seems that there is a type of delay after clicking, I canít switch fast between right and left.

Mine seems to do this also g502. The left, right pan sometimes even fails to register but definitely a delay when it does. Kinda hafta use pan button wait .5 sec to see if it works, if it does, it feels like you hafta wait a brief moment before using pan button again.
On the other hand scroll wheel up and down is currently set for my left and right and is for sure half of the game changer plans for looting. Just wish I could get the pan buttons to work as well for some of the quick menu options. I still find myself having to open inventory to activate some perks, attachment, ect.
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: RML on 02:00 PM - 10/19/18
Strange mine seems to work fine. You could make an alternate profile and use whatever buttons you want.
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: RML on 03:35 PM - 10/19/18
I noticed od1n has a cool new setup idea too that you may want to try. Check out his BO4 configuration here.

https://community.xim.tech/index.php?topic=71224.0


BTW.. any mod feel free to move my setup to the shared config thread, if you would please.

I just noticed that such a thing even existed! Lol
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: mcdonamw on 04:39 PM - 10/19/18
The mouse wheel right and left click (pan?) works not correctly with my g502. It seems that there is a type of delay after clicking, I canít switch fast between right and left.

Mine has always done this, and even my  new G502 Hero if I use the default pan assignments.  Change them to KB buttons and it'll work fine.  I never understood why the default Pan buttons had issues.
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: RML on 05:21 PM - 10/19/18
The mouse wheel right and left click (pan?) works not correctly with my g502. It seems that there is a type of delay after clicking, I canít switch fast between right and left.

Mine has always done this, and even my  new G502 Hero if I use the default pan assignments.  Change them to KB buttons and it'll work fine.  I never understood why the default Pan buttons had issues.

Ahhh... That makes sense. Yeah I assign a KB button to Pan left and Pan right. Works fine.
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: M1k3 on 05:50 PM - 10/19/18
The mouse wheel right and left click (pan?) works not correctly with my g502. It seems that there is a type of delay after clicking, I canít switch fast between right and left.

Mine seems to do this also g502. The left, right pan sometimes even fails to register but definitely a delay when it does. Kinda hafta use pan button wait .5 sec to see if it works, if it does, it feels like you hafta wait a brief moment before using pan button again.
On the other hand scroll wheel up and down is currently set for my left and right and is for sure half of the game changer plans for looting. Just wish I could get the pan buttons to work as well for some of the quick menu options. I still find myself having to open inventory to activate some perks, attachment, ect.


I binded the Buttons 8 and 9 to scrollwheel left and right with the Logitech Software on my PC. Then bind 8+9 to d-Pad left+right in your xim settings. Since then there is no more delay
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: neopaxxx on 12:52 AM - 10/20/18
The scroll wheel has no delay. Itís only while clicking the wheel to a site.
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: Phoenix10 on 01:58 AM - 10/20/18
Hey RML
I noticed a big problem

I use your settings
On

Logitech G502
12.000 dpi
1000 hz
Aim assist on

Speed
Hip 6-8 most of the times 8
Ads 3

What problem i found
In most fast hip firing fights
My xim crash and i cant turn to follow the opponent
It stops and i cant move to the target..

Any idea?


P. S.
Also about wingsuit is there any way to be active only wile i hold its actovation button, and when i release it to go back to my normal config?
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: M1k3 on 01:47 PM - 10/20/18
The scroll wheel has no delay. Itís only while clicking the wheel to a site.

Thats exactly what I tried to explain..
Scroll Wheel left Click = 8
Scroll Wheel right Click = 9
both binded in the Logitech Software to these buttons..


Edit:

But check out odins config. The idea to swipe left/right with mouse buttons left/right is much more comfortable and faster imho
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: RML on 03:13 PM - 10/20/18

What problem i found
In most fast hip firing fights
My xim crash and i cant turn to follow the opponent
It stops and i cant move to the target..

Any idea?


P. S.
Also about wingsuit is there any way to be active only wile i hold its actovation button, and when i release it to go back to my normal config?


Try curve 1.0 for Hip and you should fix that problem.

Wingsuit just unclick the toggle box for the config and then it' only be active while the button is held.

I also like Od1n's idea with menu navigation. The only draw back is it needs its own config.
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: Phoenix10 on 04:32 PM - 10/20/18

What problem i found
In most fast hip firing fights
My xim crash and i cant turn to follow the opponent
It stops and i cant move to the target..

Any idea?


P. S.
Also about wingsuit is there any way to be active only wile i hold its actovation button, and when i release it to go back to my normal config?


Try curve 1.0 for Hip and you should fix that problem.

Wingsuit just unclick the toggle box for the config and then it' only be active while the button is held.

I also like Od1n's idea with menu navigation. The only draw back is it needs its own config.

Hmm i think i will combine the two confiqs in one. Yours and odins.
Just a question how can i make the 1.0 curve for hip?
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: RML on 05:18 PM - 10/20/18
Just copy/paste it into the Hip ballistic curve box.
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: Omarf826 on 11:52 PM - 10/20/18
Iíve read other users here are using 270ms delay vs 125ms for ads, can you elaborate why 125>270. Iíve tried 125ms and its worked well but seems likesomethings still off.

P.s ( i only use kn, icr, abr, and occasionally  gks) i barely snipe

What would be a better delay for those guns?
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: Phoenix10 on 10:36 AM - 10/21/18
Just copy/paste it into the Hip ballistic curve box.

Yes but from were?
Sorry for the stupid questions but am noob as f*ck
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: SwipeFPS on 04:18 PM - 10/21/18
I still canít find settings that work for me man this is frustrating af. I play competitive free ladders and tourneys so my aim has to be golden lol some of these curves either over accelerate or just feels off. I currently use 3200 dpi with a g502 mouse. I just need to be able to beam people like how I use to in ww2. Any top tier boarders who play snd tourneys got any pointers for me.

Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: RML on 04:24 PM - 10/21/18
Iíve read other users here are using 270ms delay vs 125ms for ads, can you elaborate why 125>270. Iíve tried 125ms and its worked well but seems likesomethings still off.

P.s ( i only use kn, icr, abr, and occasionally  gks) i barely snipe

What would be a better delay for those guns?

It was a ballpark figure. Since playing more TDM I've changed my delay to 170ms. It feels pretty close for most guns
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: Omarf826 on 07:09 PM - 10/21/18
Iíve read other users here are using 270ms delay vs 125ms for ads, can you elaborate why 125>270. Iíve tried 125ms and its worked well but seems likesomethings still off.

P.s ( i only use kn, icr, abr, and occasionally  gks) i barely snipe

What would be a better delay for those guns?

It was a ballpark figure. Since playing more TDM I've changed my delay to 170ms. It feels pretty close for most guns

I mostly only play blackout, and kn/icr/abr are my go to guns, i virtually only use those guns every time i play. I tried 270ms today and it worked really good, barely lost any gun fights when i would shoot first/etc accuracy and sensitivity felt really good as well. I will try 170ms tonight on blackout
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: jjoao on 11:31 AM - 10/22/18
What is the best ads delay for sniper?
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: kls on 02:40 AM - 10/23/18
Im using the curve with sync off and 1.25 xj ratio, aim assist doesnt feel that strong anymore.
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: cullenmac on 06:23 AM - 10/23/18
so i have tried everything low dpi high dpi aa on aa off and i couldnt break 1.5 kd. i went wireless to try to see if bad ping would help still crap. 2 hours ago i switched to rmls setting and have gone 124 and 42 in tdms and i have been leveling up weapons like the mosu and the lmgs. i think once i start using the icr and vapr my stats will improve even more under his settings , oh and thats having a 2-8 game where i came into a game and they were loosing 60 -15 and i was bombarded with score streaks
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: dimikxx on 09:49 AM - 10/23/18
To OP, RML

I see you're using a Nav controller. I'm receiving my XIM APEX and the Nav controller this week. I wanted to know how you solved this issue and can help out a noob.

I like to use mouse wheel down as reload, and mouse wheel up as switch to secondary weapon. In game, its Triangle to switch weapons, but HOLD triangle to call in streaks. What are the possible solutions to this, if I want to maintain mouse wheel up to switch weapons.

Thanks,
Dmitry
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: Redrabbit5 on 10:00 AM - 10/23/18
To OP, RML

I see you're using a Nav controller. I'm receiving my XIM APEX and the Nav controller this week. I wanted to know how you solved this issue and can help out a noob.

I like to use mouse wheel down as reload, and mouse wheel up as switch to secondary weapon. In game, its Triangle to switch weapons, but HOLD triangle to call in streaks. What are the possible solutions to this, if I want to maintain mouse wheel up to switch weapons.

Thanks,
Dmitry

First solution , open your Hip config in app , scroll down to all bind click on primary so appear ď secondary ď you can make bind for extra button , example click mouse wheel for ď triangle ď

Second solution , remove a bind from your d pad on Sony nav and add ď triangle ď

Add at your setup a multi usb extra with a cheap keyboard for extra bind .
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: cullenmac on 10:03 AM - 10/23/18
To OP, RML

I see you're using a Nav controller. I'm receiving my XIM APEX and the Nav controller this week. I wanted to know how you solved this issue and can help out a noob.

I like to use mouse wheel down as reload, and mouse wheel up as switch to secondary weapon. In game, its Triangle to switch weapons, but HOLD triangle to call in streaks. What are the possible solutions to this, if I want to maintain mouse wheel up to switch weapons.

Thanks,
Dmitry
what mouse are you using? i use the g502 . on the nav side i use the trigger as crouch and upper button as lb . i use g502 mouse wheel right as rb . i also put some sugru on the nav where my palm and fingers rest makes them a lot more comfortable
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: Omarf826 on 12:55 PM - 10/23/18
Im using the curve with sync off and 1.25 xj ratio, aim assist doesnt feel that strong anymore.


How much ads delay are you using??
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: skrelet on 03:13 PM - 10/23/18
Thank you for this! I have struggled hard the past week to "fight" the AA but still have AA, tried a bunch of curves and settings.

But this curve have been the best yet!

This curve only for the ads is perfect! (X5BC:AACBVIKKg+iFRoakiDSJxIsijICNrI7Yj9KQzJHGko6TiJSClXyWj5e7mQCakJy2n1mil6cQJxAnECcQJxAnECcQJxAnECcQJxAnECcQJxAnECcQJxAnECcQJxAnECcQJxAnECcQ:X5BC)

I've heard numerous people have the problem of "fighting" the AA, but this fixed my problem.

Settings used with this curve:

4000 DPI mouse
1000hz (app + mouse)

Hip: 10
Ads: 7.50
Sync: Common on both (since i play 60FPS, XONEX)
Smooth: 3 on both
200 ads delay

Feels very close to PC but still utilizing the AA!
All people having problems with the AA in Bo4 should definitely try this curve with these settings or ur own.

Kind Regards!
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: jjoao on 12:49 AM - 10/24/18
Thank you for this! I have struggled hard the past week to "fight" the AA but still have AA, tried a bunch of curves and settings.

But this curve have been the best yet!

This curve only for the ads is perfect! (X5BC:AACBVIKKg+iFRoakiDSJxIsijICNrI7Yj9KQzJHGko6TiJSClXyWj5e7mQCakJy2n1mil6cQJxAnECcQJxAnECcQJxAnECcQJxAnECcQJxAnECcQJxAnECcQJxAnECcQJxAnECcQ:X5BC)

I've heard numerous people have the problem of "fighting" the AA, but this fixed my problem.

Settings used with this curve:

4000 DPI mouse
1000hz (app + mouse)

Hip: 10
Ads: 7.50
Sync: Common on both (since i play 60FPS, XONEX)
Smooth: 3 on both
200 ads delay

Feels very close to PC but still utilizing the AA!
All people having problems with the AA in Bo4 should definitely try this curve with these settings or ur own.

Kind Regards!
Copy/Paste again your curve because this one doesn't work for me.This curve is for hip or ads.

What is your x/y ratio?
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: skrelet on 05:02 AM - 10/24/18

Copy/Paste again your curve because this one doesn't work for me.This curve is for hip or ads.

What is your x/y ratio?
[/quote]

the curve is only for the ads, and i copyd first page curve as seen here:

APEX:
Code: [Select]

>>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:AACBVIKKg+iFRoakiDSJxIsijICNrI7Yj9KQzJHGko6TiJSClXyWj5e7mQCakJy2n1mil6cQJxAnECcQJxAnECcQJxAnECcQJxAnECcQJxAnECcQJxAnECcQJxAnECcQJxAnECcQ:X5BC
<<< XIM APEX END COPY <<<

So in other words, copy this:

X5BC:AACBVIKKg+iFRoakiDSJxIsijICNrI7Yj9KQzJHGko6TiJSClXyWj5e7mQCakJy2n1mil6cQJxAnECcQJxAnECcQJxAnECcQJxAnECcQJxAnECcQJxAnECcQJxAnECcQJxAnECcQ:X5BC

default settings on x/y ratio.
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: vikram_101 on 08:28 AM - 10/24/18
Hello Guys :)

I have pasted RMLs fill configuration and only using the default ADS tab.
I only play TDMs and i find that with AA off (in game menu) serves perfectly with this profile :D

Sorry if its a dumb question. Im new to all this :)
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: Taktikz on 08:34 AM - 10/24/18
Hello Guys :)

I have pasted RMLs fill configuration and only using the default ADS tab.
I only play TDMs and i find that with AA off (in game menu) serves perfectly with this profile :D

Sorry if its a dumb question. Im new to all this :)

I don't understand the Aim Assist in the menu, because you can turn it off, but it says "This will not affect multiplayer" Ö so even if you turn it off in the options, you will still have aim assist in normal multiplayer?

I think it only turns Aim Assist off for Blackout but not for games like TDM etc. Anyone know?
Title: Re: BO4 My Advanced Setup/Advice
Post by: lh82p on 12:12 PM - 10/24/18
Thanks for letting me know I forgot to mention Turn Assist with Wing Suit, etc. I updated the OP

Also added Full config for Apex. Sorry, I no longer have a Xim4

Is the Apex much better then the Xim4 in Black ops 4?
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: Alverax on 03:10 PM - 10/24/18
Funny you ask if xim4 is better in my personal opinion I'm having such a hard time with my new xim apex I like a lot my configuration I had for bo4 with my xim4 it felt way more smooth than with the apex somehow I read here that everyone is using 1000hz with apex but when I do that in my case feels like it has a latency delay it doesn't feel as responsive as xim4 and i tried everything there is to try like lowering it to 500hz 250hz even 125hz (this last one of I understand correctly is the one xim4 uses) same sensitivity settings on 125hz with apex feel like complete @#$% and so do the other frequencies compared to my xim4 on 125hz my mouse is the proteus core g502 and I have it at 1000hz polling rate and 12k dpi never had a problem with my xim4 but with apex same mouse settings feels soooooooo bad at least in this game I haven't really played anything else I got it 2 days after bo4 got released (xim apex) and I can tell u XIM4 FTW
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: ungabunga9 on 04:34 PM - 10/24/18
I purchased Apex and I can notice a difference when compared to XIM4.

The Apex feels different(better) but I don't think it will make you aim better.

I'm running 1000hz. Tried multiple setups/curves on both APEX and XIM4.

This is generally what I expected. I decided to purchase the Apex based on how many countless hours I actually spend with a xim. The other reason that I wanted Apex is that more configs are being shared on Apex.

At the end of the day, upgrading from XIM4 to Apex will probably have zero impact on your K/D. A big part of becoming good with a XIM is just muscle memory.
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: Pickle Jar Hero on 12:49 PM - 10/25/18
RML, thanks for all the hard work on this...it does not go unappreciated!

Quick Question:

I pulled in the Full Config and the delay is showing 65 ms delay with no SAT for ADS config...

I thought I had read somewhere you were playing with the default delay with SAT.  Just wanted to check confirm.

Anyone else using smooth aim transition on ADS? 

Thanks!
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: RML on 12:54 PM - 10/25/18
RML, thanks for all the hard work on this...it does not go unappreciated!

Quick Question:

I pulled in the Full Config and the delay is showing 65 ms delay with no SAT for ADS config...

I thought I had read somewhere you were playing with the default delay with SAT.  Just wanted to check confirm.

Anyone else using smooth aim transition on ADS? 

Thanks!

Check here for my latest full config settings.

https://community.xim.tech/index.php?topic=71474.0
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: Phoenix10 on 07:26 AM - 10/27/18

What problem i found
In most fast hip firing fights
My xim crash and i cant turn to follow the opponent
It stops and i cant move to the target..

Any idea?


P. S.
Also about wingsuit is there any way to be active only wile i hold its actovation button, and when i release it to go back to my normal config?


Try curve 1.0 for Hip and you should fix that problem.

Wingsuit just unclick the toggle box for the config and then it' only be active while the button is held.

I also like Od1n's idea with menu navigation. The only draw back is it needs its own config.

Hmm i think i will combine the two confiqs in one. Yours and odins.
Just a question how can i make the 1.0 curve for hip?

Can someone please help me here
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: Taktikz on 04:40 AM - 10/31/18
RML, you still using your ACTIVE curve since last nights update?

Aim assist feels stronger now after the update for me, using your ACTIVE Curve (XIM4).

It was fine pre-update though. :-|
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: duvdvn on 08:01 AM - 10/31/18
Hello RML.

we need new ST for bo4.

ask why?

there is no aim assist after the "huge" update.

Thanks!
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: Taktikz on 08:10 AM - 10/31/18
Hello RML.

we need new ST for bo4.

ask why?

there is no aim assist after the "huge" update.

Thanks!

What are you talking about? The aim assist has got massively stronger since last nights 1.04 update :-| My settings felt great pre-update, now the aim assist is way too strong, even using RML's AAA Curve (which is what I was using pre-update too)
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: duvdvn on 08:23 AM - 10/31/18
Hello RML.

we need new ST for bo4.

ask why?

there is no aim assist after the "huge" update.

Thanks!

What are you talking about? The aim assist has got massively stronger since last nights 1.04 update :-| My settings felt great pre-update, now the aim assist is way too strong, even using RML's AAA Curve (which is what I was using pre-update too)

i play on default sync. maybe this is the problem?  :o
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: Taktikz on 08:34 AM - 10/31/18
^^ I don't know, I use XIM4 still 12K DPI 1000Hz, Aim Assist Strength is 100% stronger since last nights patch, no question. It was perfect for me the night before the update.
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: JustSquatchThings on 11:26 PM - 10/31/18
Noticed that your bo4 curve is different than your other post for bo4. What curve is the one your currently running?
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: Kivansh on 02:50 PM - 11/01/18
your settings are amazing, i did increase sens little, but it work great only one issue i'm having is
meanwhile i'm going forward with no turns at all my character goes slightly to the right just a little bit and have to correct the direction by the mouse. is it something with the curve?

example: a car need alignment, the problem i have similar to this haha
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: Phoenix10 on 04:07 AM - 11/02/18
@RML are you still there ??

it seems that we have problem with new update ..

any idea ??
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: TroyMuni on 02:34 PM - 11/12/18
@RML are you still there ??

it seems that we have problem with new update ..

any idea ??

What kind of a problem are you noticing?  He may just be updating his master config that he linked us all to instead of checking this thread.
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: quietclutch on 05:06 PM - 11/12/18
Would this work well for multiplayer in black ops 4 like TDM. Just wondering if like the aim assist is useful not only in blackout.
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: TroyMuni on 11:39 AM - 11/13/18
@RML are you still there ??

it seems that we have problem with new update ..

any idea ??

I went back and tried RML's official setup and definitely noticed some issues that may have resulted from the latest patch.  Not sure if it's what you're experiencing but I couldn't play with that setup.  The biggest issues that I had was that it was very slow to transition into ADS and very slow to snap onto targets when in ADS.  I tried making adjustments, but literally nothing I did made enough of a difference.  Hip was too sluggish for me too.

I went back to my original settings that I was using before, which include his original ADS curve.  They work very well for me. AA was working for me with this setup and I don't have any issues breaking it off to get headshots. It's very easy to adjust to enemies that you unexpectedly encounter in an enclosed space directly in front of you.  I'll post them tonight when I get home if anyone's interested. 
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: redacted on 01:15 PM - 11/13/18
@RML are you still there ??

it seems that we have problem with new update ..

any idea ??

I went back and tried RML's official setup and definitely noticed some issues that may have resulted from the latest patch.  Not sure if it's what you're experiencing but I couldn't play with that setup.  The biggest issues that I had was that it was very slow to transition into ADS and very slow to snap onto targets when in ADS.  I tried making adjustments, but literally nothing I did made enough of a difference.  Hip was too sluggish for me too.

I went back to my original settings that I was using before, which include his original ADS curve.  They work very well for me. AA was working for me with this setup and I don't have any issues breaking it off to get headshots. It's very easy to adjust to enemies that you unexpectedly encounter in an enclosed space directly in front of you.  I'll post them tonight when I get home if anyone's interested.

Interesting to hear of the issues. I dropped 23 kills in quads(blackout) with RMLs profile and curves just last game. Feels the same to me. To be completely fair, my 1.05 CoD update just hit me and is now forcing me to download. I'll report back once this update is finished
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: redacted on 04:35 PM - 11/13/18
Post 1.05 update = still amazing :D
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: RML on 05:41 PM - 11/13/18
Everyone is going to be slightly different based on the amount of AA they like to experience while playing the game. That is why I have multiple AA curves for people to try out and also explained how to adjust them to your preference.

Some will like my settings by default, but most will need to tweak a little as well they should.
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: TroyMuni on 01:00 PM - 11/14/18
First, this isn't intended to be critical of RML...I would never even be here using/understanding this tool if it wasn't for him.


Sorry, got tied up last night and just got around to posting my settings.  I had to do this quickly so I only have the main full config.  You'll need to set up your buttons to whatever you're comfortable using.  These settings work great for me with the same polling and DPI settings

>>> XIM APEX [Best -Call of Duty: Black Ops 4] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: RML on 10:17 AM - 11/15/18
Why would anyone think you were being critical on me? You're still using my Classic curve. That's what this is all about. Take my setup and tweak it to your liking. Everyone is going to be different.
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: puinsai on 10:45 AM - 11/15/18
any update with the new FW with Boost and Steady Aim ?
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: Hersheys247 on 04:59 PM - 11/18/18
Does anyone have a config for the chat wheel (inventory left) and the emote wheel (inventory right) so that it can be used in game with the XIM4

TIA
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: RML on 08:18 AM - 11/19/18
any update with the new FW with Boost and Steady Aim ?

I'll be updating my AAA thread with a new setup and the full configs as well. I am currently on the beta firmware and all my old setups work fine.
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: TroyMuni on 01:06 PM - 11/19/18
Cool, thanks.  I saw a XIM Apex video where they talk about the firmware, but he calls it "a deal breaker" in the first few minutes.  I'm not sure if I should use it or not with the ballistics curve?
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: ervaNz on 03:07 PM - 11/19/18
Can't wait to see the new settings RML with the firmware update. 

While we wait for RML to post his new killer config....I played around in a private server today messing with settings with the new firmware.  I kept it simple today and these settings felt good.  There is room for improvement but overall its pretty solid and basic.  I am not that active but I am a 3 KD multiplayer guy (just running around like an idiot) and usually 9-13 kills a game with the occasional big kill game in Blackout.

AA - On
Ingame Sens - Insane (14)
ST - BO4
Freq - Common
DPI - 3600
Hip - 9
ADS - 5
Polling - 1000hz
No Smoothing
No Steady Aim / Boost
No Curves

May be worth a try and tune to your liking.  DPI is at 3600 as thats my G400S max otherwise I'd go higher.  Cheers.
Title: Re: BO4 My Advanced Setup/Advice (Updated 10/19/18)
Post by: Phoenix10 on 01:37 AM - 11/20/18
any update with the new FW with Boost and Steady Aim ?

I'll be updating my AAA thread with a new setup and the full configs as well. I am currently on the beta firmware and all my old setups work fine.

perfect sir

i cant wait to try your new setup
Title: Re: BO4 My Advanced Setup/Advice (Updated 11.20.18)
Post by: RML on 09:49 PM - 11/20/18
Updated with latest Blackout settings (I also use these settings for other multiplayer modes as well, just deactivate the Wing suit profile).

So what's new?
- Variable Sync settings to maximize Aim Assist for every engagement.
- Variable ADS curves to maximize Aim Assist for every engagement.
- Alt ADS profile to maximize mid-long ranged encounters. This will be a simple change for those of you that are used to PUBG. Everyone else, yes it is a learning curve. However, if you want to be able to cut through Aim Assist at CQC and still be able to nail those mid-long ranged shots, this is the best way! I promise you it feels very fluid after a few practice hours and once you really get the hang of it you will see your game play rise to a new level. This really does make a big difference once mastered. In Blackout you'll have the tools you need to dominate at any range. In multiplayer, if you're a Run N Gun player like me. You'll be dominating CQC and now hitting shots on those ranged targets that were often troublesome in the past.

Yes it's a learning curve, is it worth it? Depends on how good you want to be!  :-*

You will notice I also have some new curves and my old 1.2 curve. This is where it gets tricky folks, because to be honest. I often simply CANNOT decide which curves I like the most. OBsIV"s curves work insanely well and I sometimes mix them up as well. Currently though, I'm using 1.2 on primary ADS and OBsIV's gradual curve for mid-long. Like I said though, you can mix and match and see what works best for you. With the proper sync and sens settings, they all manage AA very well and should be fine tuned to your liking.

I can honestly say this setup is perfect for me. But you have to follow the Sync settings, that's a must! Sync off cuts through AA a lot better then Common.

CHEERS!
Title: Re: BO4 My Advanced Setup (Updated 11.20.18)
Post by: siijuunn on 01:09 AM - 11/21/18
if you guys havenít tried this profile out yet HOLY MOSES

Do it! Helps sooo much with be aim assist. I went from like 1.89 to an average of 3.3 in 10 games. I dropped my sene a little but itís pretty much perfect! Ty for all the hard work!!! Youíve made me so happy!!
Title: Re: BO4 My Advanced Setup (Updated 11.20.18)
Post by: duvdvn on 02:10 AM - 11/21/18
Hello RML !

So first of all thanks you so much for you awesome Balistic cruve - i like it so much.

Second, we know that you use the Nav (Sony) and not keyboard. my question is - your config suitable for keyboard users like me? 

i try to play yesterday on Default, your balistic (ofcurse) 4 smoothing (both), 165 delay, 1.30 x\y on the Ads, 1000 boost on the Hip and 100 boost on the ADS.

Before the update, everything works fine, but after the (another...) update the game looks pretty quickly and i have jitters.

so i little confused cuz i dont know if your settings will works well on my keybaord.

Best Regards,

duvdvn (psn).
Title: Re: BO4 My Advanced Setup (Updated 11.20.18)
Post by: RML on 09:32 AM - 11/21/18
if you guys havenít tried this profile out yet HOLY MOSES

Do it! Helps sooo much with be aim assist. I went from like 1.89 to an average of 3.3 in 10 games. I dropped my sene a little but itís pretty much perfect! Ty for all the hard work!!! Youíve made me so happy!!

Thanks for the recommendation, glad you like it.



Hello RML !

So first of all thanks you so much for you awesome Balistic cruve - i like it so much.

Second, we know that you use the Nav (Sony) and not keyboard. my question is - your config suitable for keyboard users like me? 

i try to play yesterday on Default, your balistic (ofcurse) 4 smoothing (both), 165 delay, 1.30 x\y on the Ads, 1000 boost on the Hip and 100 boost on the ADS.

Before the update, everything works fine, but after the (another...) update the game looks pretty quickly and i have jitters.

so i little confused cuz i dont know if your settings will works well on my keybaord.

Best Regards,

duvdvn (psn).

My Settings will work just as well with KB. The only difference I've personally noticed between Nav and KB is you can break AA a little quicker with KB when Strafing. This is because WASD instantly pegs the stick, where Nav's analog movement may not as quickly. However, on the flip side. If you're moving just one direction with a KB or NOT quickly strafing you will sometimes actually feel more AA with a KB. This is because the faster you move "in one direction" the greater the Aim Assist. I think some people get confused about this.

As far as your jitters go, here's what I would do if I were you.
- Get rid of the Boost in HIP and ADS! You don't need it with SYNC OFF. I only use Boost with wing suit. Boost will instantly give you jitters and destroys micro movements.
- Changing your X/Y ratio can also give you jitters and cause you to quickly exceed the Turn Speed limit while moving your cross hairs vertically. That's because the look mech in game has a greater horizontal turn speed the vertical. Don't believe me? Move your cross hairs left and right and then Up and Down. See how fast you red light vertically? :P

I know some suggest changing X/Y ratio to help with recoil, I personally advise against it, primarily for this reason.



Title: Re: BO4 My Advanced Setup (Updated 11.20.18)
Post by: duvdvn on 09:43 AM - 11/21/18
if you guys havenít tried this profile out yet HOLY MOSES

Do it! Helps sooo much with be aim assist. I went from like 1.89 to an average of 3.3 in 10 games. I dropped my sene a little but itís pretty much perfect! Ty for all the hard work!!! Youíve made me so happy!!

Thanks for the recommendation, glad you like it.



Hello RML !

So first of all thanks you so much for you awesome Balistic cruve - i like it so much.

Second, we know that you use the Nav (Sony) and not keyboard. my question is - your config suitable for keyboard users like me? 

i try to play yesterday on Default, your balistic (ofcurse) 4 smoothing (both), 165 delay, 1.30 x\y on the Ads, 1000 boost on the Hip and 100 boost on the ADS.

Before the update, everything works fine, but after the (another...) update the game looks pretty quickly and i have jitters.

so i little confused cuz i dont know if your settings will works well on my keybaord.

Best Regards,

duvdvn (psn).

My Settings will work just as well with KB. The only difference I've personally noticed between Nav and KB is you can break AA a little quicker with KB when Strafing. This is because WASD instantly pegs the stick, where Nav's analog movement may not as quickly. However, on the flip side. If you're moving just one direction with a KB or NOT quickly strafing you will sometimes actually feel more AA with a KB. This is because the faster you move "in one direction" the greater the Aim Assist. I think some people get confused about this.

As far as your jitters go, here's what I would do if I were you.
- Get rid of the Boost in HIP and ADS! You don't need it with SYNC OFF. I only use Boost with wing suit. Boost will instantly give you jitters and destroys micro movements.
- Changing your X/Y ratio can also give you jitters and cause you to quickly exceed the Turn Speed limit while moving your cross hairs vertically. That's because the look mech in game has a greater horizontal turn speed the vertical. Don't believe me? Move your cross hairs left and right and then Up and Down. See how fast you red light vertically? :P

I know some suggest changing X/Y ratio to help with recoil, I personally advise against it, primarily for this reason.

What a statement bro! Thanks you so much. i will check it again and contact will you soon.

i wish that i can play with you with the xim apex.

Thanks again!
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: Mike10522 on 12:54 PM - 11/21/18
do you use SAB at all?
Title: Re: BO4 My Advanced Setup/Advice (Updated 11.20.18)
Post by: Delmaestr0 on 01:45 PM - 11/21/18
Updated with latest Blackout settings (I also use these settings for other multiplayer modes as well, just deactivate the Wing suit profile).

So what's new?
- Variable Sync settings to maximize Aim Assist for every engagement.
- Variable ADS curves to maximize Aim Assist for every engagement.
- Alt ADS profile to maximize mid-long ranged encounters. This will be a simple change for those of you that are used to PUBG. Everyone else, yes it is a learning curve. However, if you want to be able to cut through Aim Assist at CQC and still be able to nail those mid-long ranged shots, this is the best way! I promise you it feels very fluid after a few practice hours and once you really get the hang of it you will see your game play rise to a new level. This really does make a big difference once mastered. In Blackout you'll have the tools you need to dominate at any range. In multiplayer, if you're a Run N Gun player like me. You'll be dominating CQC and now hitting shots on those ranged targets that were often troublesome in the past.

Yes it's a learning curve, is it worth it? Depends on how good you want to be!  :-*

You will notice I also have some new curves and my old 1.2 curve. This is where it gets tricky folks, because to be honest. I often simply CANNOT decide which curves I like the most. OBsIV"s curves work insanely well and I sometimes mix them up as well. Currently though, I'm using 1.2 on primary ADS and OBsIV's gradual curve for mid-long. Like I said though, you can mix and match and see what works best for you. With the proper sync and sens settings, they all manage AA very well and should be fine tuned to your liking.

I can honestly say this setup is perfect for me. But you have to follow the Sync settings, that's a must! Sync off cuts through AA a lot better then Common.

CHEERS!

Hey, I've been trying to paste your config into the manager but I keep getting an error.  I tried using just the select button, then manually selecting it, then deleting the spaces in the beginning and I keep getting the error. This is for the full config. I had to older on saved but the updated config just won't stick
Title: Re: BO4 My Advanced Setup/Advice (Updated 11.20.18)
Post by: puinsai on 01:57 PM - 11/21/18
Hey, I've been trying to paste your config into the manager but I keep getting an error.  I tried using just the select button, then manually selecting it, then deleting the spaces in the beginning and I keep getting the error. This is for the full config. I had to older on saved but the updated config just won't stick

do you have the last beta firmware ?
Title: Re: BO4 My Advanced Setup/Advice (Updated 11.20.18)
Post by: Delmaestr0 on 02:08 PM - 11/21/18
Hey, I've been trying to paste your config into the manager but I keep getting an error.  I tried using just the select button, then manually selecting it, then deleting the spaces in the beginning and I keep getting the error. This is for the full config. I had to older on saved but the updated config just won't stick

do you have the last beta firmware ?

Yea, I'm running the beta 20181109

Actually I just checked and while the xim firmware is 20181109, the xim manager is not. Would that cause the issue?

Final edit. Got it. Didn't realize the manager had to be updated too. Had to get test flight first. Thanks
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: Kuzzad on 02:39 PM - 11/21/18
Rml question about how you have this config set up you have the mid range curve set up for the 9 key but you also have that as a secondary key for the normal ads page care to explain how this works?
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: B0wl_of_weed on 02:49 PM - 11/21/18
Thanks rml ill give these a try. Do you use a curve for sniping? Also do you ever find sync off is jittery at times i really find an issue with that
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: Kuzzad on 03:34 PM - 11/21/18
Also do you have a curve for snipers ? I canít seem to snipe like I used to when I used a controller
Title: Re: BO4 My Advanced Setup/Advice (Updated 11.20.18)
Post by: Phoenix10 on 03:42 PM - 11/21/18
Updated with latest Blackout settings (I also use these settings for other multiplayer modes as well, just deactivate the Wing suit profile).

So what's new?
- Variable Sync settings to maximize Aim Assist for every engagement.
- Variable ADS curves to maximize Aim Assist for every engagement.
- Alt ADS profile to maximize mid-long ranged encounters. This will be a simple change for those of you that are used to PUBG. Everyone else, yes it is a learning curve. However, if you want to be able to cut through Aim Assist at CQC and still be able to nail those mid-long ranged shots, this is the best way! I promise you it feels very fluid after a few practice hours and once you really get the hang of it you will see your game play rise to a new level. This really does make a big difference once mastered. In Blackout you'll have the tools you need to dominate at any range. In multiplayer, if you're a Run N Gun player like me. You'll be dominating CQC and now hitting shots on those ranged targets that were often troublesome in the past.

Yes it's a learning curve, is it worth it? Depends on how good you want to be!  :-*

You will notice I also have some new curves and my old 1.2 curve. This is where it gets tricky folks, because to be honest. I often simply CANNOT decide which curves I like the most. OBsIV"s curves work insanely well and I sometimes mix them up as well. Currently though, I'm using 1.2 on primary ADS and OBsIV's gradual curve for mid-long. Like I said though, you can mix and match and see what works best for you. With the proper sync and sens settings, they all manage AA very well and should be fine tuned to your liking.

I can honestly say this setup is perfect for me. But you have to follow the Sync settings, that's a must! Sync off cuts through AA a lot better then Common.

CHEERS!



RML am facing a problem with your set up

Am using G502 mouse and Sony Navigation Controller

I set
Heal on both hip and ads at button 9 (L1) of navigation controller

But I cant make it work
Always when I hold L1 for heal my player always goes at ads mode
And I can't heal
What is the problem

I tried also to set all hip buttons and inherits ads and long range, but still the same

Here is my confinq
Code: [Select]

>>> XIM APEX [RML BLACKED OUT] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

What is the problem???
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: RML on 04:09 PM - 11/21/18
The issue is I use button 9 (L1) as my Alt ADS. You either have to disable the Alt ADS profile or use another button to heal.
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: Phoenix10 on 04:19 PM - 11/21/18
Were is alt dsl because i cant found it?
And what it use for?
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: Mike10522 on 04:29 PM - 11/21/18
there seems to be an issue with the gliding config.   When I activate turn assist and look down my character in blackout doesn't dive down.


Any fix for this?
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: RML on 05:00 PM - 11/21/18
Were is alt dsl because i cant found it?
And what it use for?

It's the 4th profile to the right hip>ads>wind n it>alt Ads. Go to alt ADS and uncheck the enable button at the top. By doing this you're not optimizing your setup though and ranged shots will be more difficult. You also need to remove button 9 from secondary button bindings in hip.


there seems to be an issue with the gliding config.   When I activate turn assist and look down my character in blackout doesn't dive down.

Any fix for this?

It works fine, you're swiping down with the mouse while holding the turn assist button riight?
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: The prodigy on 05:12 PM - 11/21/18
Were is alt dsl because i cant found it?
And what it use for?

It's the 4th profile to the right hip>ads>wind n it>alt Ads. Go to alt ADS and uncheck the enable button at the top. By doing this you're not optimizing your setup though and ranged shots will be more difficult. You also need to remove button 9 from secondary button bindings in hip.


there seems to be an issue with the gliding config.   When I activate turn assist and look down my character in blackout doesn't dive down.

Any fix for this?

It works fine, you're swiping down with the mouse while holding the turn assist button riight?

Pretty sure its because you don't check 'inherit' so the movement is still on nav for that profile.
Had the same issue until i figured this out.
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: Alverax on 06:20 PM - 11/21/18
Am I the only one here that finds the ads way to high? And also I noticed that whenever I use sync off if you move your mouse slowly in diagonal directions either way from the center to the top or center to the bottom it moves really jittery for some reason that doesn't happen with other sync options. Thank you MRL anyways for ur hard work bro
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: Minipeace on 06:52 PM - 11/21/18
Has any one noticed a change in the look mechanics since the 1.07 patch.
When I sat on the rear of a quad on blackout I had very slow movement but now I have the same sensitivity as my setting so I can turn nice and quickly.
Thought I would mention this as the patch may have altered other aspects of the movement in game.
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: Mike10522 on 06:57 PM - 11/21/18
Were is alt dsl because i cant found it?
And what it use for?

It's the 4th profile to the right hip>ads>wind n it>alt Ads. Go to alt ADS and uncheck the enable button at the top. By doing this you're not optimizing your setup though and ranged shots will be more difficult. You also need to remove button 9 from secondary button bindings in hip.


there seems to be an issue with the gliding config.   When I activate turn assist and look down my character in blackout doesn't dive down.

Any fix for this?

It works fine, you're swiping down with the mouse while holding the turn assist button riight?


yes, I hold the right click which activates it, and then with east i pan the camera so i'm looking down which should allow me to pick up speed.  But my character stays the way it is, no moving. 


Then when I release right mouse button my camera snaps back to where it was before I moved it
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: RML on 07:31 PM - 11/21/18
Am I the only one here that finds the ads way to high? And also I noticed that whenever I use sync off if you move your mouse slowly in diagonal directions either way from the center to the top or center to the bottom it moves really jittery for some reason that doesn't happen with other sync options. Thank you MRL anyways for ur hard work bro

This is the whole point of the setup that people aren't understanding. Normal ADS isn't meant for slow movements. It's meant for CQC and some mid ranged encounters. The alt ADS is there for your slow micro aiming needs. You guys aren't reading the thread, this isn't a plug and play setup. Also, don't be afraid to turn the sensitivity down. Nearly EVERYONE will have to adjust sensitivity to their liking.

On top of that there seem to STILL be issues with copying entire configs and buttons not transferring correctly. I just noticed my MWR full config buttons were a disaster and not what I'm using.   >:(
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: RML on 07:37 PM - 11/21/18
Mike I'll try it right now after copying and pasting my own config. Maybe something isn't transferring

Yep, works fine. Did you take it off of toggle? Change button combos around and get something off?
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: Mike10522 on 07:52 PM - 11/21/18
Mike I'll try it right now after copying and pasting my own config. Maybe something isn't transferring


I didn't copy and paste your config, I set it up manually *I copy and pasted the curves*
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: Ixian on 10:06 PM - 11/21/18
This config is stupid-good. Maybe it's because I also use a Nav and a 12k/1k mouse and am used to it but I installed the full config, mapped the buttons the way I like, dialed in sens after an initial match, and almost immediately started wrecking people. I'm sure I'll tweak it more but thanks RML!
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: xpandabl3 on 02:49 AM - 11/22/18
Hi RML, been a lurker since XIM4 and now using Apex. Just want to express my thanks for your awesome curves for COD series. It really does make a difference.

Just curious if anyone tries this setup with a G703 wireless mouse? Not sure if its just me but if I have the Sync set to off using G703 wirelessly, it jitters/stutters whenever character is moving while turning. Fortunately I do have a G502 laying around and it works perfectly. If I use G703 wired, it is also no issue however.
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: AahTist on 03:08 AM - 11/22/18
Hi when have keys set like reload is kpad3 are you using a keypad as well?
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: Ixian on 07:06 AM - 11/22/18
Hi when have keys set like reload is kpad3 are you using a keypad as well?

He's using a Nav, that's what Nav buttons show up as (kpad1, 2, 3 etc.)
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: B0wl_of_weed on 08:25 AM - 11/22/18
I use nav none of my buttons show up key pad 1 i was also wondering same thing are u usijg keyboard or fooot pedals :o and also what do you use for sniping
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: RML on 08:52 AM - 11/22/18
I use nav none of my buttons show up key pad 1 i was also wondering same thing are u usijg keyboard or fooot pedals :o and also what do you use for sniping

Here's the deal with the key pad buttons. 1st off they have absolutely nothing to do with using a NAV. Some mouse buttons don't always work right on default settings so I use a wireless keypad to name buttons in the Logitech gaming software. I also use it as a numbering system to better organize the G502 mouse buttons. Plus its needed to make macro's for games like Destiny. And one last thing, I use it to change configs without a smart phone occasionally.
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: Mike10522 on 09:33 AM - 11/22/18
hey RML, were you able to figure out what's going on with wing suit and turn assist?
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: RML on 10:21 AM - 11/22/18
hey RML, were you able to figure out what's going on with wing suit and turn assist?

It works fine for me, no issues. Can you post your full config. If so I'll take a look at it. You must have something a miss.
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: Mike10522 on 10:25 AM - 11/22/18
hey RML, were you able to figure out what's going on with wing suit and turn assist?

It works fine for me, no issues. Can you post your full config. If so I'll take a look at it. You must have something a miss.


Code: [Select]
>>> XIM APEX [Sam] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: RML on 11:53 AM - 11/22/18
Here's your full config back, it should work now lol...

Let me know. You'll have to hit your wing suit activation key to deactivate. :)

Code: [Select]
    >>> XIM APEX [Sam] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: AahTist on 01:33 PM - 11/22/18
I use nav none of my buttons show up key pad 1 i was also wondering same thing are u usijg keyboard or fooot pedals :o and also what do you use for sniping

Here's the deal with the key pad buttons. 1st off they have absolutely nothing to do with using a NAV. Some mouse buttons don't always work right on default settings so I use a wireless keypad to name buttons in the Logitech gaming software. I also use it as a numbering system to better organize the G502 mouse buttons. Plus its needed to make macro's for games like Destiny. And one last thing, I use it to change configs without a smart phone occasionally.
I thought so I do the same just wanted to make sure u were not doing something else crafty.
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: AahTist on 01:35 PM - 11/22/18
is it possible to get a diagram of what buttons are where for your mouse kpad1 kpad2 etc.
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: Mike10522 on 05:44 PM - 11/22/18
Here's your full config back, it should work now lol...

Let me know. You'll have to hit your wing suit activation key to deactivate. :)

Code: [Select]
    >>> XIM APEX [Sam] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<





Still doesn't work RML.
;

I press CTRL to ativiate the aux, then I hold right click to activate turn assist which allows me to look down instantly, but my character doesn't turn to matter which direction I look.  As soon as I let go of the right mouse button the camera snaps back to it's default location.
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: poorboy08 on 10:22 PM - 11/22/18
First time poster so go easy on me...but I'm having the same problem with wingsuit control.

Here is my config...
Code: [Select]
>>> XIM APEX [Bo4 original] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

RML I have tried to copy your config code multiple times and paste it in a newly created config.  Everytime I've tried I get an error, and no config info other than your config name and HIP sens show up.  Here is the procedure I'm doing.

1.  From the main XIM screen I select New Config
2.  Select BO4 and XBOX One
3.  Load the config and from the Identity screen select Paste.

Am I doing something wrong?

BTW RML, your insight and dissemination of knowledge is very much appreciated, you are a rare bird :-)

Hope everyone had a happy Turkey day.
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: LastStandD on 05:19 AM - 11/23/18
First time poster so go easy on me...but I'm having the same problem with wingsuit control.

Here is my config...
Code: [Select]
>>> XIM APEX [Bo4 original] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

RML I have tried to copy your config code multiple times and paste it in a newly created config.  Everytime I've tried I get an error, and no config info other than your config name and HIP sens show up.  Here is the procedure I'm doing.

1.  From the main XIM screen I select New Config
2.  Select BO4 and XBOX One
3.  Load the config and from the Identity screen select Paste.

Am I doing something wrong?

BTW RML, your insight and dissemination of knowledge is very much appreciated, you are a rare bird :-)

Hope everyone had a happy Turkey day.

Are you using the Beta firmware ?

The config only works with the New beta  FIRMWARE 20181109
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: another1ne on 11:03 AM - 11/23/18
@RML  Any reason u do not use steady aim or smooth aiming?? Just curious... maybe i will have to go away from it.
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: S13002931 on 02:18 PM - 11/23/18
Many thanks  for this configuration.  I use nav + g502.   

1st configuration I found on this forum which doesn't need   hip/ads sensitivity adjustment! ( unlike others which are extremely slow & make you to waste time  adjusting it) 

Its just perfect ! ( 12k dpi 1k polling  )
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: another1ne on 09:13 PM - 11/23/18
@RML  Any reason u do not use steady aim or smooth aiming?? Just curious... maybe i will have to go away from it.


I have to use smooth aiming otherwise my aim skips all over but the steady aim why dont u use that? no point because the curve is creating its own?
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: Maianhtuan305 on 10:55 PM - 11/23/18

I just have xim4  and i'm using G900  with 12000 DPI- 1000Hz

i'm newbie and dont know much about curve and setting

i still using curve of RML in update 19/11 for ADS (set 2 sens) and HIP using ADS translator ( set 5 sens) -- (1) do i wrong when using HIP with ADS curve and translator?

and now i read this update and see that this use only for XIM APEX --(2) Can i use curve of APEX for XIM4?

(3) i don't know what " HIP1.0" / " ADS 1.x " means? This is version of RML or what? and how to set and change between those version

to day i just think about those 3 question :D pls answer me gently
Sorry for my bad english :(
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: UnholySeoul on 05:49 AM - 11/24/18
Does anyone have an updated config with the new boost & analag behavior settings?
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: YeaItsMe on 07:47 AM - 11/24/18
Just wanted to say thanks RML...

I was fairly happy with my own settings but finally got around to trying yours yesterday. I like the flexibility that the variable sync options bring to the table. I only used your setup for a couple hours but this may become my top config for BO4

Again, thx for the work you put into this thread/sharing
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: RML on 10:25 AM - 11/24/18
is it possible to get a diagram of what buttons are where for your mouse kpad1 kpad2 etc.

Here's what it looks like.
(https://i.imgur.com/7nofMHZ.jpg)



Does anyone have an updated config with the new boost & analag behavior settings?

The new settings are not really necessary IMO. Boost is good for Vehicles and wing suit configs, other then that Sync off
 @ 1000 polling handles AA well with a curve or even no curve. Analog behavior on a KB kind of defeats the purpose of a KB. Steady Aim is like applying Angle Snapping to your mouse (which I used to do, but hate it now). OBsIV threw these features in because some people were complaining that XIM4 had features that Apex doesn't.



@RML  Any reason u do not use steady aim or smooth aiming?? Just curious... maybe i will have to go away from it.

I have added some smoothing in my latest config. The reason I try to stay away from smoothing is Aim Assist. Adding smoothing makes AA slightly stronger. This is the reason I also added an Alt ADS config. I want Primary ADS for CQC-Mid and ALt ADS for Mid-Long engagements. This allows me to have less AA at close range and more at longer ranges.



Many thanks  for this configuration.  I use nav + g502.   

1st configuration I found on this forum which doesn't need   hip/ads sensitivity adjustment! ( unlike others which are extremely slow & make you to waste time  adjusting it) 

Its just perfect ! ( 12k dpi 1k polling  )


You must like similar settings, that's all. Most will have to fine tune to there liking. Good to know you play pretty much exactly like me though.  8)





Title: Re: BO4 My Advanced Setup (Updated 20181124)
Post by: RML on 01:44 PM - 11/24/18
Updated 20181124 - New Sniper curve (used for snipers and AR's, etc. with AA, short scopes) and new sensitivity settings.
Title: Re: BO4 My Advanced Setup (Updated 11.21.18)
Post by: poorboy08 on 02:21 PM - 11/24/18
First time poster so go easy on me...but I'm having the same problem with wingsuit control.

Here is my config...
Code: [Select]
>>> XIM APEX [Bo4 original] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

RML I have tried to copy your config code multiple times and paste it in a newly created config.  Everytime I've tried I get an error, and no config info other than your config name and HIP sens show up.  Here is the procedure I'm doing.

1.  From the main XIM screen I select New Config
2.  Select BO4 and XBOX One
3.  Load the config and from the Identity screen select Paste.

Am I doing something wrong?

BTW RML, your insight and dissemination of knowledge is very much appreciated, you are a rare bird :-)

Hope everyone had a happy Turkey day.

Are you using the Beta firmware ?

The config only works with the New beta  FIRMWARE 20181109

That's why...not using that firmware...I'll have to update.  Thanks!
Title: Re: BO4 My Advanced Setup (Updated 20181124)
Post by: Crosy on 06:10 PM - 11/24/18
Hi RML. Thanks for the great work. I've been using your previous settings with great success so far.

I have 2 questions about the new one:
1) Do you have an activation button for the Sniper Ads? How does that work since you have 2 different Ads settings? Don't they overlap?
2) What settings do you have now for Menu Navigation using the mouse to select items?

Thanks again for the effort!
Title: Re: BO4 My Advanced Setup (Updated 20181124)
Post by: S13002931 on 09:46 AM - 11/26/18
How do you activate Alternate ADS ? Is the button on Nav or mouse ?  Please help me understand  .   
Title: Re: BO4 My Advanced Setup (Updated 20181124)
Post by: RML on 10:13 AM - 11/26/18
Left Trigger is Primary, Left Bumper is Alt.
Title: Re: BO4 My Advanced Setup (Updated 20181124)
Post by: S13002931 on 03:51 PM - 11/26/18
Left Trigger is Primary, Left Bumper is Alt.

Thank you
Title: Re: BO4 My Advanced Setup (Updated 20181124)
Post by: Mongoose87 on 01:02 AM - 11/27/18
Left Trigger is Primary, Left Bumper is Alt.

Is the alt ads button meant to function on itís own (aim and trigger alt profile with the one keybind)? Or do you need to ads normally and press alt keybind whilst still holding ads keybind?
Title: Re: BO4 My Advanced Setup (Updated 20181124)
Post by: RML on 01:35 AM - 11/27/18
Left Trigger is Primary, Left Bumper is Alt.

Is the alt ads button meant to function on itís own (aim and trigger alt profile with the one keybind)? Or do you need to ads normally and press alt keybind whilst still holding ads keybind?

It no longer matters. I've optimized my setup to the point you can forget about the Alt ADS. These new settings are easily the best I've ever used in this game. Yet, very easy and simple to use.

You folks ready, cause I'm telling you, it's going to be pee pee pants city here real soon!

MASSIVE UPDATE!
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: The prodigy on 01:55 AM - 11/27/18
(https://i.imgur.com/jNw0WHz.gif)

I might aswell uninstall now with the skill based matchmaking and popularity of your setup.
Save myself a headache  :P
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: S13002931 on 02:03 AM - 11/27/18
Thank you for the new configuration  :) it is wonderful.

Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: Souljazz on 05:52 AM - 11/27/18
hello its normal the setup dont have curve? just to be sure its all right :p
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: RML on 09:38 AM - 11/27/18
hello its normal the setup dont have curve? just to be sure its all right :p

Yep, no curves! Just Sync off, 1000hz, Boost and Hip 1.6x ADS for Ads delay happiness
Title: Re: BO4 My Advanced Setup (Updated 20181124)
Post by: Phoenix10 on 10:43 AM - 11/27/18
Left Trigger is Primary, Left Bumper is Alt.

Is the alt ads button meant to function on itís own (aim and trigger alt profile with the one keybind)? Or do you need to ads normally and press alt keybind whilst still holding ads keybind?

It no longer matters. I've optimized my setup to the point you can forget about the Alt ADS. These new settings are easily the best I've ever used in this game. Yet, very easy and simple to use.

You folks ready, cause I'm telling you, it's going to be pee pee pants city here real soon!

MASSIVE UPDATE!

Hey RML were are the new settings?
Were can i found them?
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: Gilmani on 10:49 AM - 11/27/18
I appreciate all the hard work. It's still doesn't feel right to me. I'm having more luck and winning more gunfights on bo3 sf using common sync.

Can you share an alternative setup that could help me?

Best,
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: Dodge on 11:08 AM - 11/27/18
RML what mouse pad do you use with the g502?
With my Logitech GPW on a g440 the sens is way to fast.
Title: Re: BO4 My Advanced Setup (Updated 20181124)
Post by: redacted on 11:12 AM - 11/27/18
Left Trigger is Primary, Left Bumper is Alt.

Is the alt ads button meant to function on itís own (aim and trigger alt profile with the one keybind)? Or do you need to ads normally and press alt keybind whilst still holding ads keybind?

It no longer matters. I've optimized my setup to the point you can forget about the Alt ADS. These new settings are easily the best I've ever used in this game. Yet, very easy and simple to use.

You folks ready, cause I'm telling you, it's going to be pee pee pants city here real soon!

MASSIVE UPDATE!

Hey RML were are the new settings?
Were can i found them?

First page of this thread :) Enjoy!
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: Haghgoy on 11:17 AM - 11/27/18
I just did what ever you said, but it feel so @#$% slow?
did i make any mistakes or it should feel so slow?
btw thanks buddy for all your hard works
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: Souljazz on 11:27 AM - 11/27/18
hello its normal the setup dont have curve? just to be sure its all right :p

Yep, no curves! Just Sync off, 1000hz, Boost and Hip 1.6x ADS for Ads delay happiness

And how it works the wing suit I use keyboard I donít understand how i have to change keys
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: RML on 12:12 PM - 11/27/18
RML what mouse pad do you use with the g502?
With my Logitech GPW on a g440 the sens is way to fast.

I'm using the SS 9Hd pad. All of my peripherals are in my Sig. Just lower your sens a little but keep the Hip to ADS speed differential.


[quote/]

And how it works the wing suit I use keyboard I donít understand how i have to change keys

It's a sub profile next to ADS. Just enable it and assign whatever key you want to activate. While it's active you can use RC on the mouse for Turn Assist.


I just did what ever you said, but it feel so @#$% slow?
did i make any mistakes or it should feel so slow?
btw thanks buddy for all your hard works
Some are saying too fast, some too slow. Just goes to show how different we can all be. If it's too slow or fast then adj. Your sens accordingly "it's ok". Just keep everything else the same and keep hip at least 1.6x faster then Ads.
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: Hacksaw1942 on 04:03 PM - 11/27/18
RML Just switched to your newest and it is AWESOME!!! I kept everything the same as yours( using the same mouse and nav).
THANKS!!!!
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: Gilmani on 05:54 PM - 11/27/18
I appreciate all the hard work. It's still doesn't feel right to me. I'm having more luck and winning more gunfights on bo3 sf using common sync.

Can you share an alternative setup that could help me?

Best,
[/quote

RML Can you help me out? struggling here
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: redacted on 06:00 PM - 11/27/18
I've only played a handful of games with the new settings. Very small sample size but so far I think I'm liking the pre-no-curve config. I'll give it more time, I'm a fair person ;)
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: Hacksaw1942 on 06:07 PM - 11/27/18
Some are saying too fast, some too slow. Just goes to show how different we can all be. If it's too slow or fast then adj. Your sens accordingly "it's ok". Just keep everything else the same and keep hip at least 1.6x faster then Ads.

I prefer my ads a lil slower than my hip why do you have it faster
[/quote]


I just copied and pasted  RML settings and Hip is at 68 and ADS is at 42
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: Delmaestr0 on 06:12 PM - 11/27/18
Some are saying too fast, some too slow. Just goes to show how different we can all be. If it's too slow or fast then adj. Your sens accordingly "it's ok". Just keep everything else the same and keep hip at least 1.6x faster then Ads.

I prefer my ads a lil slower than my hip why do you have it faster
[/quote]

the ADS is slower than the HIP with his config.

I had to lower the sens.  I try to keep a 360 at the the length on my mouse pad.  I settled on 42 Hip 26 ADS.
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: AahTist on 06:25 PM - 11/27/18
Then why is he saying keep hip 1.6 times faster than ads?
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: KCabello77 on 06:37 PM - 11/27/18
Hey! I just bought the Sony Nav, and I was wondering what your button mapping was? Iíve got the G502 as well, I just canít figure out what buttons (mostly on the mouse) should do what.
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: RML on 07:05 PM - 11/27/18
Then why is he saying keep hip 1.6 times faster than ads?

Umm... I don't. Hip is exactly 1.6x faster then ADS. At least as far as numbers are concerned.


Hey! I just bought the Sony Nav, and I was wondering what your button mapping was? Iíve got the G502 as well, I just canít figure out what buttons (mostly on the mouse) should do what.

When you copy/paste my entire config you get my button layout as well. It's all there.
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: KCabello77 on 09:17 PM - 11/27/18

Hey! I just bought the Sony Nav, and I was wondering what your button mapping was? Iíve got the G502 as well, I just canít figure out what buttons (mostly on the mouse) should do what.

When you copy/paste my entire config you get my button layout as well. It's all there.
[/quote]

Yeah, but the issue is that youíve mapped the buttons on the G502 (ie. DPS shift, DPS up/ down) to random keys in order to use them, for example the reload button, or X, is mapped to Key something.. but i donít know which button on the G502 that is
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: AahTist on 10:19 PM - 11/27/18
RML do you play blackout or normal cod multiplayer when you use this setup I find they are different when it comes to the way the guns work especially with there being a lot of range in blackout
and your cm360 for hip is aroud 7cm is that rite?
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: CameronMC on 11:01 PM - 11/27/18
Yeah I'm curious also RML this config felt amazing for Multiplayer but I felt like I wanted more aim assist at range for Blackout or maybe I'm just used to no boost, but the 400 boost felt amazing like PC even for multi just blackout range of like 100m+ I kinda miss AA

Also I see you got the 1.6 hip/ads but you keep the 224 delay value plus turn off smooth aim transition, thoughts behind this? I think roads suggested 1.6 with no smooth aim and 0 value.
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: jeffpaw96 on 11:04 PM - 11/27/18
Per requests, here's my current setup for BO4.

I personally like utilizing AA as I believe it gives me an advantage. Why? Because when utilizing AA I can out maneuver and out aim "most" of my opponents that can't move and turn as fast as I can and maintain a high degree of accuracy. I can do this because I can play at higher sensitivity's then a controller player and still be accurate with my shots thanks to the slow down effects of AA. With a little practice XIM can easily put you into the "Elite" class of controller players. The biggest problem with AA is it can be a little over powering for a device as precise as a mouse. For more on that, please see the link in my signature titled "Anti Aim Assist curve set for any FPS game".

Here's What's Changed with the Last Update 20181126
EVERYTHING!
- Gone are Two separate ADSs
- Gone are AA curves, yes you heard it right. You see I highly underestimated the effects of boost with 1000hz and Sync off.

So what's new?
- A very simple setup
- The best setup I've ever used, Period!

Folks this setup is so simple yet so @#$% good you are going to soil your britches.

Here's my Full Setup
Beta Firmware/Manager, Link - https://community.xim.tech/index.php?topic=72146.0
In game sensitivity should be maxed at Insane 14
Aim Assist in game should be [ON]
12000 DPI  (I prefer higher DPI because it cuts through AA better then low DPI. Here's a calculator if you can't or don't want to match my DPI)
http://www.csgosetup.com/dpi-calculator/
G502 Polling is set to 1000
BO4 ST
XIM APEX Polling - 1000
HIP - Sync OFF, sens 68, Smoothing 3
ADS - Sync OFF, sens - 42, Smoothing 3, Boost 400.
ADS delay - 224
Wing Suit/Vehicle - Sync COMMON, Sens - 15, Boost 1000, Turn Assist Active and assigned to Right Click for ease of use.

THREE things are super key to this setup.
1 - Sync and Smoothing settings.
2 - Keep Hip approx. 1.6x's faster then ADS, this helps smooth out ADS delay on all weapons.
3 - Boost 400 feels perfect for me. You can Adj. Up or down for more or less Aim Assist. Going much higher though will ruin micro aiming though and going much lower will make AA too strong imo.

You will feel more Aim Assist with this setup then any of my priors. However, AA will feel optimized and very easy to manipulate. You should have no issues getting in and out of the AA bubble.

Note: I use the same settings for Blackout and other Multiplayer modes, you just have to Activate/Deactivate the Wing Suit profile depending on which mode you're playing. I DONOT use Steady Aim for any of my profiles.

Full Configuration - I'm a NAV user, so you'll have to assign buttons to your liking. This "Full Config Code" is for APEX ONLY!
Code: [Select]
   >>> XIM APEX [RML BO4 ] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

If you still feel the need for an AA curve, (Aim Assist too strong? Then just apply this one).

Code: [Select]
  >>> XIM APEX [Translate Ballistics] START COPY >>>
X5BC:AAAA3QG6ApcDdARRBS4GCwboB8UIowmACl0LOgwXDPQN0Q6uD4uQaBEwEfgSwBOIFFAVGBXgFqgXcBg4GQAZyBqQG1gcIBzoHbAeeJ9AoCGhG6JgpCKnEKcQJxAnECcQpxAnECcQ:X5BC
<<< XIM APEX END COPY <<<   


CHEERS!

New setup is amazing!! Thank you.

Are the smoothing values to reduce jitter, or do you have another reason for their inclusion?
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: Figga on 01:05 AM - 11/28/18
Amazing setting RML!! Another thing I add toggle and then I bind deactivate button on WINGSUIT auxiliary to whatever you use for X (Xbox) so when you jump out of car or atv it deactivates and you can start shooting!! Lol
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: RML on 08:56 AM - 11/28/18
New setup is amazing!! Thank you.

Are the smoothing values to reduce jitter, or do you have another reason for their inclusion?

I'm glad so many are enjoying it, I knew from the start this would be a popular setup. It just feels so @#$% good! Tracking is super easy and getting in and out of the hit box is pretty @#$% smooth.

The smoothing values are to reduce jitter, you are correct.


Yeah I'm curious also RML this config felt amazing for Multiplayer but I felt like I wanted more aim assist at range for Blackout or maybe I'm just used to no boost, but the 400 boost felt amazing like PC even for multi just blackout range of like 100m+ I kinda miss AA

Also I see you got the 1.6 hip/ads but you keep the 224 delay value plus turn off smooth aim transition, thoughts behind this? I think roads suggested 1.6 with no smooth aim and 0 value.


For me personally I like these settings for all game modes. There's a few things you guys can do though. Maybe setup a full config just for Blackout and lower the boost values. Otherwise try one of the following.
- Setup an Alt ADS like I used in my old setup, just for long range encounters
- Add more Smoothing, 5-8 instead of 3. This will make micro movements slightly more manageable and add a little AA.
- Try these settings with Default or Common Sync to add more AA with Blackout ONLY.

As for ADS delay and smooth aim. The whole idea behind the value of HIP = ADS x 1.6 is to average out the turn speed for Hip and ADS. So the delay time really shouldn't matter too much. But there also seems to be this weird moment on some weapons, almost like a dead spot while transitioning into ADS where your sens gets really high on occasion. That is why I left the 224 in there.


Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: CameronMC on 09:43 AM - 11/28/18
What do you think of using analog feature say a value or 50?
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: RML on 09:48 AM - 11/28/18
What do you think of using analog feature say a value or 50?

I play on an analog stick so it doesnít really apply. That feature was implemented to hide your KB from devs trying to detect it. Will raising the value give you more or less AA with a KB? Idk, I havenít experimented with it.
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: RML on 09:54 AM - 11/28/18
Also guys, just lowering your sensitivity a tad will give you added AA. Maybe turn it down a little for Blackout. I used to lower my sens approx. 10% for  Blackout. Iím used to it now though.
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: CameronMC on 09:59 AM - 11/28/18
I think I need to purchase a Sony nav haha and yeah it sorta does raise aa I feel
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: RML on 10:10 AM - 11/28/18
I think I need to purchase a Sony nav haha and yeah it sorta does raise aa I feel

Idk, Iíd play on KB but I like to chill on the couch lol. KB is a bigger advantage though IMO. Itís just cumbersome and annoying. But strafing with a KB is far superior to strafing with analog.

Thatís how I always know a good XIM player just beat me. When I see that ultra quick strafing lol.. itís soo obvious! You just canít move like that with an analog stick.
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: RML on 10:16 AM - 11/28/18

Yeah, but the issue is that youíve mapped the buttons on the G502 (ie. DPS shift, DPS up/ down) to random keys in order to use them, for example the reload button, or X, is mapped to Key something.. but i donít know which button on the G502 that is

I added a pic of my G502 button mapping to the OP, for reference.
Title: Re: BO4 My Advanced Setup (Updated 20181124)
Post by: JDM on 10:21 AM - 11/28/18
Left Trigger is Primary, Left Bumper is Alt.

Is the alt ads button meant to function on itís own (aim and trigger alt profile with the one keybind)? Or do you need to ads normally and press alt keybind whilst still holding ads keybind?

It no longer matters. I've optimized my setup to the point you can forget about the Alt ADS. These new settings are easily the best I've ever used in this game. Yet, very easy and simple to use.

You folks ready, cause I'm telling you, it's going to be pee pee pants city here real soon!

MASSIVE UPDATE!

Going to try your settings, Iím kinda bored lol.


Seems youíre not using a super slow sens anymore.
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: RML on 10:26 AM - 11/28/18
Hmmm... that seems like a strange comment as the new settings are slightly slower then what Iíve been using, especially with the curves gone.

The reasoning is just for pure accuracy. The Boost allows me to use lower settings because it breaks the bubble and allows for tracking that I could only accomplish before with curves and high sensitivity.

One of my prior setups utilized Common Sync, maybe thatís what youíre referring too.
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: ervaNz on 10:42 AM - 11/28/18
these feel so smooth. im a low sens player playing on 3600 DPI and didnt even change hip/ads numbers and its just not right the amount of domination!
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: N1TRO on 10:58 AM - 11/28/18
Very interesting i may give this a try in overwatch and tweek to my liking. Also do you use a very high sens if you play on your couch? Also a life hack if you ever want to switch to keyboard is to get a lap desk. Il link a cheap one below. The width is 55cm and if you got a 10 keyless keyboard they are around 37cm long so you would have enough space for an 18cm 360. You could of course also use one of the smaller keyboard devices.
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: RML on 11:04 AM - 11/28/18
these feel so smooth. im a low sens player playing on 3600 DPI and didnt even change hip/ads numbers and its just not right the amount of domination!

Yeah OBsIV really nailed it bringing Boost to Apex. I noticed this previously with my old setup where I was changing the first value of the linear scale (which was simulating boost). But this makes it much easier and user friendly.

1000hz + Sync Off + 400 Boost = Near perfect aim and tracking in BO4. Boost never felt this good with Xim4 and I never liked it running at 125hz. It just doesnít feel the same.

The really cool part is these settings transfer extremely well across A lot of games. Iím now using these exact settings with every COD and BF game I have. The only thing I have to adj. is sensitivity.

The only game series that needs a different Boost value is Destiny and Iím currently ironing that out.
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: Verone- on 11:09 AM - 11/28/18
these feel so smooth. im a low sens player playing on 3600 DPI and didnt even change hip/ads numbers and its just not right the amount of domination!

Yeah OBsIV really nailed it bringing Boost to Apex. I noticed this previously with my old setup where I was changing the first value of the linear scale (which was simulating boost). But this makes it much easier and user friendly.

1000hz + Sync Off + 400 Boost = Near perfect aim and tracking in BO4. Boost never felt this good with Xim4 and I never liked it running at 125hz. It just doesnít feel the same.

The really cool part is these settings transfer extremely well across A lot of games. Iím now using these exact settings with every COD and BF game I have. The only thing I have to adj. is sensitivity.

The only game series that needs a different Boost value is Destiny and Iím currently ironing that out.
How would Fortnite run with these settings? Did you try?
Gonna try later, blackout felt great
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: RML on 11:19 AM - 11/28/18
Very interesting i may give this a try in overwatch and tweek to my liking. Also do you use a very high sens if you play on your couch? Also a life hack if you ever want to switch to keyboard is to get a lap desk. Il link a cheap one below. The width is 55cm and if you got a 10 keyless keyboard they are around 37cm long so you would have enough space for an 18cm 360. You could of course also use one of the smaller keyboard devices.

Thanks, Iíve tried lap desks in the past and it just doesnít work for me. I even built my own lol. I just really like to chill when playing games. Iím competitive but not super competitive. I build these setups just to compete with all you young bucks. Iím really not that great of a player. Primarily because I canít stick to any one game. I get burned out after a few weeks and bounce around. I often wonder though how many of you beat me with my own advice lol.. but I take it as a compliment. I know my settings can make an average player (like me) really good. I can only imagine what they do for a great player!

Iím just an old dude chillin on the couch!  8)

So if you kill a dude named RockyMtn Legend.. give props please!

 :-*
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: N1TRO on 11:42 AM - 11/28/18
Il look out for you 😂😂. You sound very similar to a guy i play with often he hses a 50 inch tv and likes to chill while gaming. Its just not me monitor and desk all the way for shooters.

Also on a more important note do you not feel less accurate with a boost value on? Iv never liked the idea of adding acceleration to micromovements as it makes sense that it would lead to more inacuracy. Also what range of boost would you suggest for overwatch being that it is basically a purely hipfire game?
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: ORG on 11:58 AM - 11/28/18
RML the new settings are off the charts man, holy cow! You're right its definitely Pee Pee city for the other team though lol.

Thank you!!

Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: RML on 12:19 PM - 11/28/18
Il look out for you 😂😂. You sound very similar to a guy i play with often he hses a 50 inch tv and likes to chill while gaming. Its just not me monitor and desk all the way for shooters.

Also on a more important note do you not feel less accurate with a boost value on? Iv never liked the idea of adding acceleration to micromovements as it makes sense that it would lead to more inacuracy. Also what range of boost would you suggest for overwatch being that it is basically a purely hipfire game?

1st off, donít underestimate the couch setup! Lol.. did you look at my setup in my sig? TV pfft.. Why would I use one of those?  ;)

I do need to upgrade the monitor, just waiting for a good 4K HDR though. Weíre getting close!

About Boost, like I said prior. With XIM4 I wouldnít touch it. With Apex though running at 1000hz and Sync off, it feels completely different. Will boost destroy micro movements? Yes but only when over used. I find 400 to be the sweet spot. It changes micro a little but not too bad IMO. The reward outweighs the risk, again, IMO. Do I feel less accurate? Hell no, I feel way more accurate because I can actually track targets and move around in the hit box without running my sensitivity through the roof.

As for Overwatch, I couldnít say. I know 400 works really well with all COD and BF games but itís not enough for Destiny 2. I havenít tried it with Forts N Kites or Overwatch.


RML the new settings are off the charts man, holy cow! You're right its definitely Pee Pee city for the other team though lol.

Thank you!!



Youíre welcome Bro
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: N1TRO on 12:33 PM - 11/28/18
Thanks for the reply iv gotta give this more of a test. I mainly stayed away from off sync since the new update as i figured the fact you need smoothing for off sync to be effective wasnt worth it any longer.

On another note ever thought of uploading random gameplays with xim i know that i would be interested to watch regardless of ability none of us are pros. Antithesis is starting streaming soon and od1n uploads his own gameplay every now and then. Its nice to see the OG xim gods playing ☺
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: agthomps on 12:38 PM - 11/28/18
THANKS RML


Really like the new settings!!!!! I mainly play Hardcore KC, is it me or is the hip fire trash compared to other CODS... I could literally be behind/infront and missing shots... I run n gun!! this is getting frustrating LMAO!!!! sorry just venting!
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: RML on 12:41 PM - 11/28/18
If too much Aim Assist is your problem the 1st place you should probably start is Sync Off. AA gets considerably stronger with every other Sync setting with Low (30 FPS) being the strongest!

With smoothing set between 3-5 micros are much better but it does slightly add AA. IMO I hardly ever need to make such a fine shot that Sync Off is an issue. But thatís why smoothing is set to 3, that game me just enough to hit 99% of my shots in Blackout. In regular multiplayer You can turn smoothing completely off as it limits AA even more and isnít really needed in those modes. Itís primarily there for Blackout and I usually leave it as is just for consistency.
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: RML on 12:48 PM - 11/28/18
THANKS RML


Really like the new settings!!!!! I mainly play Hardcore KC, is it me or is the hip fire trash compared to other CODS... I could literally be behind/infront and missing shots... I run n gun!! this is getting frustrating LMAO!!!! sorry just venting!

Are you talking Aim Assist or bullet spread? They have put a HEAVY emphasis on attachments for better hip fire in this game. That being said, if you double up on laser attachments (on the classes that offer it) your Hip fire accuracy is almost as accurate as ADS fire.
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: agthomps on 12:53 PM - 11/28/18
Thanks for the fast response, I am talking about bullet spread.... I will try that double laser out on MX9...I had to bind ads+fire just to get the advantage...
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: RML on 01:17 PM - 11/28/18
Thanks for the fast response, I am talking about bullet spread.... I will try that double laser out on MX9...I had to bind ads+fire just to get the advantage...

No worries, Iím pretty much chillin today and have a lot of time to hang around.

Another tip guys, if Micro aiming is an issue then stay away from Steady Aim AT ALL COST! This is the worst setting you can use for fine aiming! I know that sounds backwards right? Steady Aim (sounds like it should help with fine aiming needs). Well if you like taking your circular movements and making them square then I guess it will. Because thatís exactly what SA does, itís like angle snapping.

Sad truth is, I used to use Angle Snapping with Logitech mice but I wouldnít touch it now. Besides, IMO Angle snapping worked better then SA does. Either way I wouldnít touch either if micro movements are an issue.
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: N1TRO on 01:33 PM - 11/28/18
To be fair a value of 1 or 2 steady aim is almost undisernable and feels very nice but i do agree that its probably not worth it in most games unless the aim assist has to much magnetism or is generally way to strong.
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: RML on 01:44 PM - 11/28/18
To be fair a value of 1 or 2 steady aim is almost undisernable and feels very nice but i do agree that its probably not worth it in most games unless the aim assist has to much magnetism or is generally way to strong.

I was talking pure micro movements, it can help with AA. After testing both though I personally find boost more effective and the better option. I didnít feel like SA was doing much of anything until it was destroying micro movements.
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: N1TRO on 02:14 PM - 11/28/18
Fair enough. Its always nice to hear anothers thoughts on new features thanks for remaining so active over the years.
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: CameronMC on 08:02 PM - 11/28/18
Any difference with Smooth Aim Transition off or on? I can't seem to find one, I always thought Smooth Aim Transition was progressive aim from XIM4 with a name change.
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: Boonersooner on 08:09 PM - 11/28/18
Any difference with Smooth Aim Transition off or on? I can't seem to find one, I always thought Smooth Aim Transition was progressive aim from XIM4 with a name change.

Same man! Great question man, hopefully RML or someone can go into detail about this!
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: Justinian27 on 08:49 PM - 11/28/18
THANKS RML


Really like the new settings!!!!! I mainly play Hardcore KC, is it me or is the hip fire trash compared to other CODS... I could literally be behind/infront and missing shots... I run n gun!! this is getting frustrating LMAO!!!! sorry just venting!

Are you talking Aim Assist or bullet spread? They have put a HEAVY emphasis on attachments for better hip fire in this game. That being said, if you double up on laser attachments (on the classes that offer it) your Hip fire accuracy is almost as accurate as ADS fire.



Thanks RML but Im wondering what I need to adjust. I like this setup but noticed I have to make large sways left and right with mouse to turn. I like using a small mouse pad. I'm not sure if i missed something. + do I only need the first curve you posted for standard multiplayer?
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: exotic on 05:36 AM - 11/29/18
Hey,

I just purchased Apex and tried out this config.

I have max dpi on g502 (12k) and 1000hz polling rate.

I am wondering are you guys able to use this kind of sensitivity or am I doing something wrong? I had to reduce sens to 16 hip and 8 ads in order to play.....
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: The prodigy on 05:51 AM - 11/29/18
Hey,

I just purchased Apex and tried out this config.

I have max dpi on g502 (12k) and 1000hz polling rate.

I am wondering are you guys able to use this kind of sensitivity or am I doing something wrong? I had to reduce sens to 16 hip and 8 ads in order to play.....

RML is a wrist aimer so it's going to be fast if you normally use your whole mousepad.
Just make sure you're using sync off.  Also you want to be using the latest beta firmware if you want to copy his full setup.
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: RML on 07:15 AM - 11/29/18
Fair enough. Its always nice to hear anothers thoughts on new features thanks for remaining so active over the years.

Thanks, also to be fair, I will test SA a little more in combo with boost instead of one or the other.


Any difference with Smooth Aim Transition off or on? I can't seem to find one, I always thought Smooth Aim Transition was progressive aim from XIM4 with a name change.

I don't see a real difference either way, however, there are alot of weapons and load out combinations. So this needs more testing. It shoudn't really matter though as we're applying the 1.6 rule to this setup which should smooth out ADS no matter what other settings you apply. So IMO, SAT is not needed. And yes, it is (was) Progressive aim.


Hey,

I just purchased Apex and tried out this config.

I have max dpi on g502 (12k) and 1000hz polling rate.

I am wondering are you guys able to use this kind of sensitivity or am I doing something wrong? I had to reduce sens to 16 hip and 8 ads in order to play.....


Sounds like you didn't turn your Sync to OFF and left it on Default.



Thanks RML but Im wondering what I need to adjust. I like this setup but noticed I have to make large sways left and right with mouse to turn. I like using a small mouse pad. I'm not sure if i missed something. + do I only need the first curve you posted for standard multiplayer?

Sounds like your DPI is probably set lower then mine or you didn't max out your "In Game" sensitivity to insane. There's no way you should have to make swipes like that to be able to turn efficiently.



RML is a wrist aimer so it's going to be fast if you normally use your whole mousepad.
Just make sure you're using sync off.  Also you want to be using the latest beta firmware if you want to copy his full setup.

Actually I'm a combo player, I use both. Kind of wrist and elbow combo thing going on there, mostly elbow.
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181126)
Post by: KCabello77 on 01:04 PM - 11/29/18
Hey RML! The settings are epic!! I absolutely have been wrecking! My only question would be, what keyboard keys do you have mapped to your mouse? That way I can figure out what buttons on your mouse do what. Also, are you still using the scroll wheel to navigate the quick equip menu? Or are you using the d pad on the Nav? I appreciate the help!
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181126)
Post by: RML on 02:57 PM - 11/29/18
Hey RML! The settings are epic!! I absolutely have been wrecking! My only question would be, what keyboard keys do you have mapped to your mouse? That way I can figure out what buttons on your mouse do what. Also, are you still using the scroll wheel to navigate the quick equip menu? Or are you using the d pad on the Nav? I appreciate the help!

(https://i.imgur.com/wCt8bLx.jpg)

I've been playing mostly TDM lately. I need to make a new setup for quick menu, I already forgot what I was using lol... maybe this weekend.
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181126)
Post by: JDM on 03:20 PM - 11/29/18
Works really well.

Changed the boost from 400 > 300

Changed the ads delay from 224 > 30 ( helps for fast pace sniping )

And the sensitivity - Hip > 89. ADS > 36.50

Only issue is itís made my sniping accuracy sooo bad, i might upload some clips of how I used to snipe, Iíd more quickscope with the outlaw mostly but my accuracy just seems really off, going to keep messing with the boost as that seems like the only thing that could be messing with it.

Other than that, feels great.

Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181126)
Post by: RML on 04:25 PM - 11/29/18
Works really well.

Changed the boost from 400 > 300

Changed the ads delay from 224 > 30 ( helps for fast pace sniping )

And the sensitivity - Hip > 89. ADS > 36.50

Only issue is itís made my sniping accuracy sooo bad, i might upload some clips of how I used to snipe, Iíd more quickscope with the outlaw mostly but my accuracy just seems really off, going to keep messing with the boost as that seems like the only thing that could be messing with it.

Other than that, feels great.

I actually wreck with sniping and boost at 400. Most snipers still have AA with all the scopes I use. I haven't sniped a ton with this in Blackout though with the sniper scope.

I'm assuming you're talking about snipers with no AA though. If so I agree that the best thing for any weapon without AA is no Boost and no Curves.
Title: Re: BO4 My Advanced Setup (Updated 20181126)
Post by: The prodigy on 07:32 PM - 11/29/18
Quote
Actually I'm a combo player, I use both. Kind of wrist and elbow combo thing going on there, mostly elbow.

Interesting , that's how i play using my xim , probably why our sensitivity is always really close i was using 64 , 38 before trying your setup.
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181126)
Post by: jeffpaw96 on 08:03 PM - 11/29/18
Hey RML! The settings are epic!! I absolutely have been wrecking! My only question would be, what keyboard keys do you have mapped to your mouse? That way I can figure out what buttons on your mouse do what. Also, are you still using the scroll wheel to navigate the quick equip menu? Or are you using the d pad on the Nav? I appreciate the help!

(https://i.imgur.com/wCt8bLx.jpg)

I've been playing mostly TDM lately. I need to make a new setup for quick menu, I already forgot what I was using lol... maybe this weekend.

Just had my best game yet with these new settings!! (64-0 on firing range hardpoint!! - called in at least 4 chopper/strike team/mantis). I do use quite a bit higher sens. but otherwise your exact config. KD averaging between 4-5 past few days. This setup is gold my friend!
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181126)
Post by: destined1ne on 08:52 AM - 11/30/18
Do you guys all use Sony Nav + G502? I have a Sony Nav and considering using it, but my mouse doesn't have enough buttons. Should I get a G502?
Also, @RML, what is "PU Stuff" in your mappings?

This is an epic config. Just won a solo blackout match with it.
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181126)
Post by: Phoenix10 on 10:16 AM - 11/30/18
RML
What monitor do you use?
Also
Which monitor do you suggest for less than 200usd
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181126)
Post by: RML on 11:32 AM - 11/30/18
Do you guys all use Sony Nav + G502? I have a Sony Nav and considering using it, but my mouse doesn't have enough buttons. Should I get a G502?
Also, @RML, what is "PU Stuff" in your mappings?

This is an epic config. Just won a solo blackout match with it.

Nav or KB, doesnít matter strictly user preference. I like Nav because itís comfy to chill on the couch with. I sit at a desk while at work a lot, I want to chill while gaming.

PU is short for pick up. I use scroll down as my primary Y button to change weapons. But you canít hold it to pick up stuff from the ground. So I have a secondary button for that.


RML
What monitor do you use?
Also
Which monitor do you suggest for less than 200usd

Iím using an older Benq monitor, canít even remember the model. Iím getting ready to upgrade just wait on a solid 4K HDR to buy.

I havenít upgraded in several years so Iím really out of the loop right now on decent cheaper models, sry.
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181126)
Post by: neat on 12:21 PM - 11/30/18
Any XIM4 users in here that can suggest some settings? Just got the game and I'm a Battlefield OG so I have no idea what im doing lol
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181126)
Post by: jeffpaw96 on 12:34 PM - 11/30/18
RML
What monitor do you use?
Also
Which monitor do you suggest for less than 200usd

This one is really good (only 1ms input delay). Refresh rate is 60hz so this really intended for console and not PC. If you can forgo lack of 4k and meh audio (you should always use headphones anyway for sound in cod) I would look at this

https://www.amazon.com/gp/aw/d/B01H5KKRLO/ref=dp_ob_neva_mobile
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181126)
Post by: N1TRO on 12:50 PM - 11/30/18
If you want a great 144hz monitor for a reasonable price id recommend the aoc pf.... i cant remember the rest but it should be easy to find. It has freedync btw which may be a benefit if you play on playstation as new models if they get 144hz compatibility will likely be freesync based as i believe the pc gpu is an amd model.
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181126)
Post by: Phoenix10 on 04:54 PM - 11/30/18
Thanks guys i will give a try
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181126)
Post by: Phoenix10 on 07:47 AM - 12/01/18
What do you think about BenQ XL2420T 24 inch
I found one used for 130 euros
Does it worth it?
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181126)
Post by: N1TRO on 08:11 AM - 12/01/18
Seems like a steal to me mate. 144hz 2 hdmi ports is always a benefit and its a premium monitor meaning its probably not a tr pannel meaning it will have more accurate colours if this is in fact the case. If that deal is legit and the monitor is in good shape you got very lucky to find the deal. Also there are conflicting specs saying 1ms or 2ms but either way its not really a big deal. Id go for it man.

Edit
The only downside i forgot to mention is it does not have a display port meaning if you would have to use dvi for 144hz which honestly doesnt mean a lot and is barely a downside just thought id mention it.
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181126)
Post by: Phoenix10 on 08:15 AM - 12/01/18
Thanks man you saved me..
The only problem i figure out is that its just 24 inch
And 1 year old
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181126)
Post by: N1TRO on 08:17 AM - 12/01/18
Id honestly say 24 inch is optimal for gaming its the perfect size to keep and a reasonable distance and be able to see the whole display. 27 inch is also fine for gaming but imo its really not necessary and may bring a tiny competitive disadvantage for the niceties of a bit bigger display.
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181126)
Post by: N1TRO on 08:24 AM - 12/01/18
Heres my monitor i got it on sale for around £150 i can highly recommend it as a cheaper end 144hz monitor. Id say if you want a new monitor that may last longer go with the aoc but if you want a more suffisticated model with better colour depth go with the benq.

AOC G2460PF 24 inch 144 Hz LED Gaming Monitor (1 ms Response Time, Height Adustable, Display Port, HDMI, DVI, VGA, Speakers, Adaptive Sync, Vesa) - Black https://www.amazon.co.uk/dp/B01BV1XBEI/ref=cm_sw_r_cp_apa_aKPaCbMBQBZ0E
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181126)
Post by: Phoenix10 on 08:28 AM - 12/01/18
N1TRO you are the best man... Thank you so much
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181126)
Post by: N1TRO on 09:04 AM - 12/01/18
All good man hope you enjoy your new monitor.
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181201)
Post by: RML on 01:34 PM - 12/01/18
Added full config for Default Sync. This should help those of you who struggle with my sync off setup and Blackout.

Cheers!
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181201)
Post by: Davano on 03:12 PM - 12/01/18
Added full config for Default Sync. This should help those of you who struggle with my sync off setup and Blackout.

Cheers!

Does this work with the 1109 version or do i need to update to 1201 for your config to work?
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181201)
Post by: RML on 12:46 AM - 12/02/18
Added full config for Default Sync. This should help those of you who struggle with my sync off setup and Blackout.

Cheers!

Does this work with the 1109 version or do i need to update to 1201 for your config to work?

The only update I'm referring to is this thread.

Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181201)
Post by: Blinky234 on 01:00 AM - 12/02/18
Love the. New config !! But sniping has been an issue for me with this one! I'm rifht onnthe guy every shot and its not hitting them ! Anything I should do RML?
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181201)
Post by: ceebs on 01:38 PM - 12/02/18
Love the. New config !! But sniping has been an issue for me with this one! I'm rifht onnthe guy every shot and its not hitting them ! Anything I should do RML?
What have you got your ADS Activation Delay set to?
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181201)
Post by: Blinky234 on 02:43 PM - 12/02/18
Delay 224
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181201)
Post by: Goommba on 03:19 PM - 12/02/18
Everytime I copy and paste the code into my apex I get an error? I am updated to the latest firmware and all my connections to the apex are good. Please Help.
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181201)
Post by: RML on 06:53 PM - 12/02/18
Everytime I copy and paste the code into my apex I get an error? I am updated to the latest firmware and all my connections to the apex are good. Please Help.

You have to be on the Beta Firmware, I linked it in the OP. Doesnít really matter though. I have something special coming tmw. These settings will soon be outdated and forgotten!

Update tmw will fix a lot of issues, no more Boost, and no more Ads delay problems!  ;)
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181201)
Post by: Goommba on 07:08 PM - 12/02/18
IM WET, SAY NO MORE.
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181201)
Post by: redacted on 07:16 PM - 12/02/18
IM WET, SAY NO MORE.

^ this
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181201)
Post by: FNATIKX on 07:24 PM - 12/02/18
Everytime I copy and paste the code into my apex I get an error? I am updated to the latest firmware and all my connections to the apex are good. Please Help.

You have to be on the Beta Firmware, I linked it in the OP. Doesnít really matter though. I have something special coming tmw. These settings will soon be outdated and forgotten!

Update tmw will fix a lot of issues, no more Boost, and no more Ads delay problems!  ;)



Can you make the new one able to be used for XIM4 aswell please and thanks!!!
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181201)
Post by: zaahj on 08:10 PM - 12/02/18
Should Target Assist be on as well? Or just AA? I heard AA was turned off in MP but it doesn't really seem like it, I thought Aim Assist didn't work when you ADS, only when hipfiring, but I definitely get Aim Assist when I ADS so i'm totally confused.
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181201)
Post by: jeffpaw96 on 12:13 AM - 12/03/18
Should Target Assist be on as well? Or just AA? I heard AA was turned off in MP but it doesn't really seem like it, I thought Aim Assist didn't work when you ADS, only when hipfiring, but I definitely get Aim Assist when I ADS so i'm totally confused.
Multiplayer/blackout - only uses target assist
Zombies - target assist + aim assist

In cod ww2 options were split into rotation assist and aim slowdown. This is not the case in bo4 where target assist is actually rotation assist and aim slowdown combined into one setting. It's all or nothing in this game. Both ADS and hip utilize target assist in both forms but it is stronger when ADSing. Rotation helps with tracking enemies that are moving while you already have your aim on them whereas aim slowdown literally slows down your aim as you are acquiring a target.

Aim assist is the auto-aim like feeling in zombies that really helps you snap onto a target when you are not even really that close to it.
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181201)
Post by: blime on 02:16 AM - 12/03/18
Sorry for a noobie-question, what is the easiest way to copy a config when on an iphone? Can't get the full text and if I send the config to my mail and den copy it I just get the error when I paste in app.
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181201)
Post by: redacted on 02:25 AM - 12/03/18
Sorry for a noobie-question, what is the easiest way to copy a config when on an iphone? Can't get the full text and if I send the config to my mail and den copy it I just get the error when I paste in app.

I double-tap it on my iphone. easy peasy
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181201)
Post by: blime on 03:19 AM - 12/03/18
Sorry for a noobie-question, what is the easiest way to copy a config when on an iphone? Can't get the full text and if I send the config to my mail and den copy it I just get the error when I paste in app.

I double-tap it on my iphone. easy peasy

Thats zoom in and zoom out for me, and when I try to manually mark it I can't get the hole text :/
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181201)
Post by: ceebs on 03:23 AM - 12/03/18
Delay 224
Sniper rifles take longer to aim down sight; 300ms IIRC. At 224 you'll switch over to your ADS sens 76ms before the ADS animation has finished and be tracking a moving target too slowly. Try a Delay of 300, but be prepared to adjust it even higher as I can't remember the aim down sight speed of all of the snipers: they might take longer.
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181201)
Post by: RML on 07:18 AM - 12/03/18

Can you make the new one able to be used for XIM4 aswell please and thanks!!!

New settings will work with XIM4, yes. However, there are a few things you may have to figure out on your own.


Delay 224
Sniper rifles take longer to aim down sight; 300ms IIRC. At 224 you'll switch over to your ADS sens 76ms before the ADS animation has finished and be tracking a moving target too slowly. Try a Delay of 300, but be prepared to adjust it even higher as I can't remember the aim down sight speed of all of the snipers: they might take longer.

This will be fixed for all weapons using my latest setup. I'll post it today, it's a lot though, going to take some time to explain.
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181201)
Post by: Omarf826 on 07:55 AM - 12/03/18
^ cant wait for the new settings to be updated  8) ;D
Title: Re: BO4 My Advanced Setup (Updated 20181201)
Post by: Shredly on 09:08 AM - 12/03/18
Hey RML curious as to why youíre not using boost or any of the new settings added in beta. Iím not questioning you I know nothing about xim just curious as to I heard their decent and I used your old build from yesterday with boost and enjoyed it canít wait to try this one.
Title: Re: BO4 My Advanced Setup ďNo CurvesĒ (Updated 20181201)
Post by: jeffpaw96 on 09:19 AM - 12/03/18
Sorry for a noobie-question, what is the easiest way to copy a config when on an iphone? Can't get the full text and if I send the config to my mail and den copy it I just get the error when I paste in app.

I double-tap it on my iphone. easy peasy

Thats zoom in and zoom out for me, and when I try to manually mark it I can't get the hole text :/
Hmm that's odd. Don't have an iphone but maybe you could paste the code in a note app like keep.google.com on a computer and then download Google keep on your phone. It should autosync
Title: Re: BO4 My Advanced Setup (Updated 20181201)
Post by: HypeR on 09:28 AM - 12/03/18
Yoo @rml,

Do u use the sync off config or the default one?
Title: Re: BO4 My Advanced Setup (Updated 20181201)
Post by: RML on 09:41 AM - 12/03/18
Hey RML curious as to why youíre not using boost or any of the new settings added in beta. Iím not questioning you I know nothing about xim just curious as to I heard their decent and I used your old build from yesterday with boost and enjoyed it canít wait to try this one.

There are some games and some scenarios where Boost will still be used. However, my goal is and always has been to optimize Aiming and Aim Assist performance. Boost is great for overcoming Aim Assist but negatively effects Hip to Ads transition and micro movements. Steady Aim Can help combat AA. But for me personally I prefer using the Gradual and Granular curves as they basically do the same thing, only better IMO. I may spend some more time with SA down the road.

Yoo @rml,

Do u use the sync off config or the default one?

I don't use either anymore, I have further optimized my setup. The new setup will have settings added for both later today. A lot of slow changes going on in the OP, sry for any confusion.
Title: Re: BO4 My Advanced Setup (Updated 20181201)
Post by: Pilik976 on 11:25 AM - 12/03/18
Hi, is it possible to copy to xim apex curve to xim 4 ?
Title: Re: BO4 My Advanced Setup (Updated 20181201)
Post by: Domenic.HRO on 11:53 AM - 12/03/18
Hello RML, can you completely copy your complete new config with default sync and sync off config. Thank you
Title: Re: BO4 My Advanced Setup (Updated 20181201)
Post by: destined1ne on 12:29 PM - 12/03/18
@RML

I know you're a sony nav user. How do you loot in Blackout while moving around? I find that there's no good way to do that with a nav, since you control movement and d-pad from the left thumb.
Title: Re: BO4 My Advanced Setup (Updated 20181201)
Post by: RML on 02:49 PM - 12/03/18
Hi, is it possible to copy to xim apex curve to xim 4 ?

Negative, sorry.


Hello RML, can you completely copy your complete new config with default sync and sync off config. Thank you

I will after I get this thread updated and the configs are ready. Busy day!


@RML


I know you're a sony nav user. How do you loot in Blackout while moving around? I find that there's no good way to do that with a nav, since you control movement and d-pad from the left thumb.

It's not easy! This is something I'll probably be working on after my Xmas gift from OBsIV.  :P
Title: Re: BO4 My Advanced Setup (Updated 20181201)
Post by: CameronMC on 04:37 PM - 12/03/18
So keen to try this, man I love your last config with Default Sync for Blackout.. dropped two 15 kill quad games in a row, then a 17 kill later.
Title: Re: BO4 My Advanced Setup (Updated 20181201)
Post by: Gilmani on 04:59 PM - 12/03/18
Hey RML, can you post the full new config?

I only see the old.
Title: Re: BO4 My Advanced Setup (Updated 20181201)
Post by: Gilmani on 05:14 PM - 12/03/18
BTW thank you for your hard work on this. You rock
Title: Re: BO4 My Advanced Setup (Updated 20181201)
Post by: RML on 05:37 PM - 12/03/18
So keen to try this, man I love your last config with Default Sync for Blackout.. dropped two 15 kill quad games in a row, then a 17 kill later.

I will leave the old settings up. I still like them as well, Boost is fun, it just sounds fun right!? However, the new settings are superior! Why? Because I say so!  :P (and so does math).


Hey RML, can you post the full new config?

I only see the old.

(http://www.quickmeme.com/img/ae/ae1dfdf4604d5c7124fa6c41de62055bdb6f349abea44c5b30fd6b68f8845c6d.jpg)
Title: Re: BO4 My Advanced Setup (Updated 20181201)
Post by: Davano on 07:57 PM - 12/03/18
Is the new config for today up yet?
Title: Re: BO4 My Advanced Setup (Updated 20181201)
Post by: Balor1712 on 08:04 PM - 12/03/18
No
Title: Re: BO4 My Advanced Setup (Updated 20181201)
Post by: Gilmani on 08:14 PM - 12/03/18
(http://i65.tinypic.com/2eba61e.png)
Title: Re: BO4 My Advanced Setup (Updated 20181201)
Post by: another1ne on 09:14 PM - 12/03/18
Itís my gaming night thought I was going to get lucky !!
Title: Re: BO4 My Advanced Setup (Updated 20181201)
Post by: Omarf826 on 09:32 PM - 12/03/18
RML stop cappin us, drop the new config tonight playa!!!
Title: Re: BO4 My Advanced Setup (Updated 20181201)
Post by: puinsai on 09:48 PM - 12/03/18
use Default Sync setup from RML but with Gradual curves, its good
Title: Re: BO4 My Advanced Setup (Updated 20181201)
Post by: Gilmani on 09:52 PM - 12/03/18
RML you're such a tease  ;)
Title: Re: BO4 My Advanced Setup (Updated 20181201)
Post by: redacted on 10:00 PM - 12/03/18
use Default Sync setup from RML but with Gradual curves, its good

This. All these people demanding it, obviously didn't read his post. If you take the time to read his posts, you'd know exactly how to set it up.
Title: Re: BO4 My Advanced Setup (Updated 20181201)
Post by: RML on 10:02 PM - 12/03/18
Lol... sorry gents, finally got home. Finishing it up now while RDR2 downloads. I'll post new settings tonight. Give me an hour or so to run through a few things.

I have been updating the post off and on throughout the day with what to expect. Most of the info is there already, but not all.

Codes coming pretty soon.
Title: Re: BO4 My Advanced Setup (Updated 20181201)
Post by: RML on 10:15 PM - 12/03/18
Wait, @#$% are you kidding me! 22gb update for BO4 today!

@#$%

Got to stop my rdr2 download   >:(

What's new with the update?
Title: Re: BO4 My Advanced Setup (Updated 20181201)
Post by: Gilmani on 10:17 PM - 12/03/18
NOOOOOOOOOOO What does this mean?
Title: Re: BO4 My Advanced Setup (Updated 20181201)
Post by: CompBoarder on 10:18 PM - 12/03/18
Nothing big, just a lot of stability and bug changes for the most part.
Title: Re: BO4 My Advanced Setup (Updated 20181201)
Post by: RML on 10:30 PM - 12/03/18
Nothing big, just a lot of stability and bug changes for the most part.

Thanks, 51% ugh
Title: Re: BO4 My Advanced Setup (Updated 20181201)
Post by: CompBoarder on 12:20 AM - 12/04/18
Almost done with that config?
Title: Re: BO4 My Advanced Setup (Updated 20181201)
Post by: RML on 01:35 AM - 12/04/18
Almost done with that config?

Still can't quite get hip under control for higher sens players. Going to have to revisit this tmw.   :'(
Title: Re: BO4 My Advanced Setup (Updated 20181201)
Post by: Boonersooner on 01:48 AM - 12/04/18
@#$% lol! Well thanks for trying to get it tonight tho!
Title: Re: BO4 My Advanced Setup (Updated 20181201)
Post by: ceebs on 03:56 AM - 12/04/18
As I also had to wait whilst Treyarch's update downloaded (they're probably adding some awesome new skins! /s), I decided to hop into a custom game and test the latest Advanced Setup.

Bottom line is, I can't get on with it. It's that 2.4x multiplier! It's just much too high for BO4. I'm not dissing the math, but dialing in an ADS sensitivity that works for me means that my Hip is super sensitive. I turn to the right and find I've done a 180! I know I could retrain myself but I don't see the point as the 1.6 version worked perfectly.

2.4x worked well in older CoDs. You mentioned Ghosts - I used that multiplier in that game and it worked flawlessly. I also used it in AW without issues, it's just proving too sensitive for the current game.

I've gone back to your 1.6x with Boost version - works really well for me, even better than the stair-stepping BC. Many thanks.
Title: Re: BO4 My Advanced Setup (Updated 20181201)
Post by: baadnewz on 04:23 AM - 12/04/18
I've tried almost all configurations on this game. None was what I would say,perfect for me. I changed DPI's ,polling rates, sensitivities,everything. Maybe this one will be the one. Can't wait for the code.
Title: Re: BO4 My Advanced Setup (Updated 20181201)
Post by: Boonersooner on 05:16 AM - 12/04/18
Idk I'm 19.20 hip and 8 ads on default  its do able... playing fine with 2.4 x ads... wish ads was a little higher tho
Title: Re: BO4 My Advanced Setup (Updated 20181201)
Post by: FNATIKX on 06:35 AM - 12/04/18
Can someone link me to his XIM4 curve for this. Please and thanks
Title: Re: BO4 My Advanced Setup (Updated 20181201)
Post by: RML on 09:23 AM - 12/04/18
As I also had to wait whilst Treyarch's update downloaded (they're probably adding some awesome new skins! /s), I decided to hop into a custom game and test the latest Advanced Setup.

Bottom line is, I can't get on with it. It's that 2.4x multiplier! It's just much too high for BO4. I'm not dissing the math, but dialing in an ADS sensitivity that works for me means that my Hip is super sensitive. I turn to the right and find I've done a 180! I know I could retrain myself but I don't see the point as the 1.6 version worked perfectly.

2.4x worked well in older CoDs. You mentioned Ghosts - I used that multiplier in that game and it worked flawlessly. I also used it in AW without issues, it's just proving too sensitive for the current game.

I've gone back to your 1.6x with Boost version - works really well for me, even better than the stair-stepping BC. Many thanks.

I can assure you, 2.4 is the right number. However, after many hours of trying to figure out a way to make this setup work for everyone. I must acknowledge my failure with using the 2.4 rule.

Thatís the bad news!

Then thereís the really good news! It doesnít matter, Iíve found a work around that fixes the Ads delay issue. Iíll share in just a few mins. Going to take some time to fix the OP AGAIN, to accurately describe this setup.

But youíre right ceebs, I too prefer the Default setup with Boost over the curves. So Iím adding the Ads transition fix and a few other minor tweaks to my current setup.

I must say, this feels Truly Fantastic! This will be my last change to this setup. I honestly believe this is as good as it gets!

Give me a few to get the OP fixed and updated.

Cheers!
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: ceebs on 11:00 AM - 12/04/18
Looking forward to trying it. You're a legend, my friend.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 11:24 AM - 12/04/18
I've updated the code in the OP. This is it guys, IMO it doesn't get any better then this! This setup is literally Rediculous!

I still have to update the description in the OP but the codes there.

What's new?
- The biggest change (which may be huge for a lot of you, I know it is for me) is this setup fixes Hip to ADS transition issues with Every Loadout, no matter the attachments or perks, sprinting, doesn't matter. This was actually a pretty simple fix TBH and I figured it out on accident while testing Hip to ADS transition with 700ms delay. No matter though, this does the trick and I no longer have ANY issues with ADS delay. The fix? Smooth Aim Trasition [on] and 700ms ADS delay! I know that seems excessive and I cant really tell you why, but it just works! Like I said, I discovered this on accident and would've never raised it that high on purpose lol. But there it is, Fixed! Now if you going drastically changing my setup and sensitivities, then I can't guarantee anything. But I think you would have to make some pretty drastic changes to screw this up.
- I've also fine tuned Boost a little more to be more diverse with different loadours. Cuts through AA beautifully, not too much, just enough IMO. It also doesn't mess up sniping in Blackout, feels great!
- Using Default Sync only right now. This is primarily just to stick with one setup and master it. Default Sync is the better overall config since I like ALL game modes. I just activate/deactivate the Wing Suit profile, depending on the mode I'm playing.
- Removed all Curves, they're simply not necessary.

I think that's it guys. This config Really feels Amazing! Please share your experience with it too. IMO it's a shame if someone isn't using this, it is that @#$% good!

Tell us your opinion, I know many of you are enjoying this. And if you aren't, also knowing why could help others find something better suited for them. Or maybe I can help you dial it in so you're experiencing what I am.

Cheers!
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: puinsai on 11:29 AM - 12/04/18
Thanks you but its NEVER a final update, a continuity of the best always towards the best trajectory, good job and lets go to try :-)
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 11:32 AM - 12/04/18
Thanks you but its NEVER a final update, a continuity of the best always towards the best trajectory, good job and lets go to try :-)

I don't know dude, this is the best a COD game  has ever felt for me personally. You guys may not be done, but I'm Golden!
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 11:57 AM - 12/04/18
Alright... Everything in the OP is updated. PLEASE let me know if something's weird in the verbiage. I don't want new users to get confused.

Thanks, enjoy and please share your experience.

Cheers!
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: S13002931 on 12:11 PM - 12/04/18
Alright... Everything in the OP is updated. PLEASE let me know if something's weird in the verbiage. I don't want new users to get confused.

Thanks, enjoy and please share your experience.

Cheers!

Thanks.  Can you please share your previous config with me ?  The one that was just before   4thDec,2018   ?  Please  ?    Ads seems jittery on this one. 
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: TheBestAkaliNA on 12:19 PM - 12/04/18
Hey RML, long time lurker and Iíve always given your configurations a try but end up using a hip cafe ratio between 1.05x and 1.14x as this feels really smooth transition wise for me, Ruhsky and Xuk He4dhunt3r. Do you have any gameplay videos of the new sensitivity? Preferably in multiplayer where you get more action. And do you reach the turn speed cap at all on your xim with these sensitivities? I also noticed you switched back from OFF to DEFAULT sync. I thought you agreed as well that OFF cut through the ADS better. I understand with the boost you might not need it but boost and steady aim can also add an inorganic layer to gameplay that can mess with muscle memory, much like curves, no?
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Helvetic on 12:33 PM - 12/04/18
Alright... Everything in the OP is updated. PLEASE let me know if something's weird in the verbiage. I don't want new users to get confused.

Thanks, enjoy and please share your experience.

Cheers!

Hey RML...I appreciate all of your hard work on this.  I was using your last update and it was also excellent. Anyhow, I am running into an issue after copying your file.  The Apex says "error" but it is loading in your settings.  I am saving right away and then adjusting the keybinds and saving again.  After I save and back out of the settings, the profile changes on it's own within a few seconds.  The items in the profile changing are the color of the config, and all of the settings.

Long story short - After copy pasting your profile it reverts to some sort of config that I have never used and clears out majority of the keybinds.

Any ideas on how to correct this?
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 12:37 PM - 12/04/18
Alright... Everything in the OP is updated. PLEASE let me know if something's weird in the verbiage. I don't want new users to get confused.

Thanks, enjoy and please share your experience.

Cheers!

Thanks.  No curves  ? :)

Nope, not needed.


Hey RML, long time lurker and Iíve always given your configurations a try but end up using a hip cafe ratio between 1.05x and 1.14x as this feels really smooth transition wise for me, Ruhsky and Xuk He4dhunt3r. Do you have any gameplay videos of the new sensitivity? Preferably in multiplayer where you get more action. And do you reach the turn speed cap at all on your xim with these sensitivities? I also noticed you switched back from OFF to DEFAULT sync. I thought you agreed as well that OFF cut through the ADS better. I understand with the boost you might not need it but boost and steady aim can also add an inorganic layer to gameplay that can mess with muscle memory, much like curves, no?

Great points. Yes Sync Off does cut through AA better then Default Sync. The trade off though is micro movements with Sync off are not nearly as good as Sync Default without adding smoothing and Smoothing effects Aim Assist.

So it's really a trade off and at the end of the day I still need some boost with Sync off as well to make AA feel right. Being that I enjoy ALL game modes I feel default is the most diverse. Great for CQC and long range sniping in Blackout.

If you're only playing multiplayer (not Blackout). Then I Sync off works great. But I'd still be adding boost, for my personal taste. Overall I just want one setup and Default is the most diverse. Not to mention it feels great anyways!

Great question!
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Skandou on 12:38 PM - 12/04/18
Thanks bro for the Job. U are a Master !
I saw that ADS-Delay is set to 700. It is right like this ?
Thanks bro.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 12:41 PM - 12/04/18
Thanks bro for the Job. U are a Master !
I saw that ADS-Delay is set to 700. It is right like this ?
Thanks bro.

Yes, but Smooth Aim Transition MUST  be [on]. No exceptions!  ;)

Alright... Everything in the OP is updated. PLEASE let me know if something's weird in the verbiage. I don't want new users to get confused.

Thanks, enjoy and please share your experience.

Cheers!

Hey RML...I appreciate all of your hard work on this.  I was using your last update and it was also excellent. Anyhow, I am running into an issue after copying your file.  The Apex says "error" but it is loading in your settings.  I am saving right away and then adjusting the keybinds and saving again.  After I save and back out of the settings, the profile changes on it's own within a few seconds.  The items in the profile changing are the color of the config, and all of the settings.

Long story short - After copy pasting your profile it reverts to some sort of config that I have never used and clears out majority of the keybinds.

Any ideas on how to correct this?

I'll test the code now.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: S13002931 on 12:42 PM - 12/04/18
Can you please share your previous config with me ?  The one that was just before   4thDec,2018   ?  Please  ?   

Thanks
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 12:49 PM - 12/04/18
Can you please share your previous config with me ?  The one that was just before   4thDec,2018   ?  Please  ?   

Thanks

Sorry it's gone, but if you uncheck smooth aim transition, set ADS delay to 224 and boost on ADS to 400, you should be close.

@Helvetic (sry if that's wrong, auto correct) the code works fine. Are you sure you're on the Beta firmware and manager. Some have had issues like this when there on the latest manager but the firmware didn't update correctly.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Helvetic on 12:52 PM - 12/04/18
Can you please share your previous config with me ?  The one that was just before   4thDec,2018   ?  Please  ?   

Thanks

Sorry it's gone, but if you uncheck smooth aim transition, set ADS delay to 224 and boost on ADS to 400, you should be close.

@Helvetic (sry if that's wrong, auto correct) the code works fine. Are you sure you're on the Beta firmware and manager. Some have had issues like this when there on the latest manager but the firmware didn't update correctly.

That would do it.  I am on the right beta firmware, but didn't know the manager mattered.  Thanks for clearing that up for me.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Sl3vin on 01:05 PM - 12/04/18
A RML config without curve? I dont geht it
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Skandou on 01:08 PM - 12/04/18
You set HIP to 8.5 and ADS to 6.5 ? Right ?
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 01:28 PM - 12/04/18
A RML config without curve? I dont geht it

Try it, it's Apex. You don't need it with this game. If you do need more help with AA, raise your sensitivity or the boost value. If you're dead set on curves then use the gradual or Granular curves that OBsIV made. Other curves may screw up the ADS delay fix.

You set HIP to 8.5 and ADS to 6.5 ? Right ?


Currently 8.5 and 5.5, but sens is somewhat subjective and should be tweaked to preference. I haven't  tried a bunch of extreme values, but I imagine the Hip to ADS transition fix has a breaking point. Not sure what that is yet though.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 01:35 PM - 12/04/18
Guys/gals, just to be clear. This setup fixes the ADS delay issue with all load-outs! You DONOT need to follow the 2.4 rule. There's a new code added TODAY! Check it out.

Getting a lot of PMs, please ask your questions here. Someone else may have the same question. There are no stupid questions!
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Omarf826 on 02:13 PM - 12/04/18
Guys/gals, just to be clear. This setup fixes the ADS delay issue with all load-outs! You DONOT need to follow the 2.4 rule. There's a new code added TODAY! Check it out.

Getting a lot of PMs, please ask your questions here. Someone else may have the same question. There are no stupid questions!

Ill test it out later tonight and let you know how it plays out, the other config was very goodi just tweaked ads delay settings to my weapons and sens wise. But i will try this one to see if its better and ill check in later
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Hacksaw1942 on 02:21 PM - 12/04/18
Thanks RML for putting the time in to do this.  I just tried it and feel that I am having a hard time locking onto targets and seemed to have better initial lock on with the previous code.
I am using the code with no changes and same settings on my g502 as yours.
Not sure if I am missing something?
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: destined1ne on 02:32 PM - 12/04/18
Hey RML, thanks for all your hard work! I'm excited to try this when I get home tonight!
Quick Question: does this work well with blackout as well?
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: isidrojose on 02:36 PM - 12/04/18
Thanks RML for this just tried it on blackout and definitely feels good..
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Helvetic on 02:50 PM - 12/04/18
Played BO4 for first time today and used the most recent profile....amazing.  Just like being on the PC.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: S13002931 on 02:53 PM - 12/04/18
I shall try it again tomorrow.  But, thanks for sharing your configurations RML.

Regards

S13
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Sl3vin on 03:22 PM - 12/04/18
Quote

Try it, it's Apex. You don't need it with this game. If you do need more help with AA, raise your sensitivity or the boost value. If you're dead set on curves then use the gradual or Granular curves that OBsIV made. Other curves may screw up the ADS delay fix.


More AA then your config??? Ist this even possible? I dont know nur your config is a aimbot for me, but its very good for me because i am not good in bo4^^

Thx for share your config. Help me a lot
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Dodge on 03:30 PM - 12/04/18
Hip and Ads sens values adapt to own needs?Much to fast for my setup.
I want to use sync off can i put some smoothing on it?

Greetz
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Hacksaw1942 on 04:09 PM - 12/04/18
are you guys liking the new code with Multiplayer or just Blackout?
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 04:22 PM - 12/04/18
Hip and Ads sens values adapt to own needs?Much to fast for my setup.
I want to use sync off can i put some smoothing on it?

Greetz

Yes and yes.


are you guys liking the new code with Multiplayer or just Blackout?

...and correct answer is yes! Both! Lol

Hey RML, thanks for all your hard work! I'm excited to try this when I get home tonight!
Quick Question: does this work well with blackout as well?

Yes


Thanks RML for putting the time in to do this.  I just tried it and feel that I am having a hard time locking onto targets and seemed to have better initial lock on with the previous code.
I am using the code with no changes and same settings on my g502 as yours.
Not sure if I am missing something?

I raised my boost from 400 to 550. Try 400 again if that was working well for you. It will give you more Aim Assist, but make it slightly harder to move your reticle in the hit box.

This is a great comment btw. Boost and Sensitivity are subjective. If you guys are feeling too much AA the raise boost value a little. Too little AA then lower your boost a little. I'd use increments of 50.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Kuzzad on 04:24 PM - 12/04/18
Had to raise ads to 6.5 other than that LOVE IT
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Dodge on 04:34 PM - 12/04/18
Switched to Sync off, lower HIP from 68 to 60 and ADS from 44 to 37.50
Very smooth, i like it.😁
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 04:40 PM - 12/04/18
Switched to Sync off, lower HIP to 60 and ADS 37.50
Very smooth, i like it.😁

Sync off is a great way to go if you're not playing Blackout. You may struggle with long sniper shots though without default Sync.

Btw... You guys are not making this easy for me, I'm really trying to stick with Default Sync so I don't have to switch configs for Blackout and other multiplayer modes. But I really like sync off as well. Default is just more diverse and also really good!


Had to raise ads to 6.5 other than that LOVE IT

Played BO4 for first time today and used the most recent profile....amazing.  Just like being on the PC.


Thanks for the feedback!
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Dodge on 04:48 PM - 12/04/18
I stick with MP and for me off is the way to go.
That boost and ADS delay is a real improvement for me compared to SA and SAB.
I will adjust the config later to 16k dpi.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Dodge on 05:02 PM - 12/04/18
Man RML...for real?!😁😂
First match with the settings icebreaker gunship 75-27 win 6.5k damage.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Hacksaw1942 on 06:41 PM - 12/04/18
So I only play multiplayer and I like the previous code better. So with this new one if I just turn sync off it should be better for MP?
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Safefall on 07:05 PM - 12/04/18
Not sure what Iím doing wrong but I get an error any time I paste these settings
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 07:06 PM - 12/04/18
Man RML...for real?!😁😂
First match with the settings icebreaker gunship 75-27 win 6.5k damage.

Glad you're enjoying it.

So I only play multiplayer and I like the previous code better. So with this new one if I just turn sync off it should be better for MP?

I'll add a code for Sync Off settings. Seems a lot prefer sync off for multiplayer.

Also, just an Fyi for everyone. After some more testing I've determined that the key to the ADS delay fix is just making sure you have Smooth Aim Transition [on] and the delay value set to be longer then the slowest ADS transition in the game. Now, I'm not sure what the slowest transition time is, but I'd guess somewhere in the 300's. So I'd think you'd be safe with an ADS delay around 400. However 400 doesn't feel any different to me them 700. So I see no need to change it. The only time I have an issue with the Hip to ADS transition while smooth aim is active is when my delay is set lower then my slowest transitioning loadout.

Hope that makes sense. In short, just keep it at 700, it's fine! Lol
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 07:08 PM - 12/04/18
Not sure what Iím doing wrong but I get an error any time I paste these settings

You have to be on the Beta firmware and manager. The link is in the OP to update.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: FNATIKX on 07:15 PM - 12/04/18
Is there a way to transition your code/settings onto the XIM4?

Or should I just toss my XIM4 out now and order an Apex? Cause thatís what itís looking like for everything.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Deazly on 07:24 PM - 12/04/18
Thanks RML. Love your work and thanks for sharing.

How do you find your perfect boost, in detail please? You said adjust by 50: Could you please elaborate?

Thx
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 07:53 PM - 12/04/18
Thanks RML. Love your work and thanks for sharing.

How do you find your perfect boost, in detail please? You said adjust by 50: Could you please elaborate?

Thx

I set boost to my preference in a private match, either with bots or a friend. Then test it in multiplayer and Blackout. The best way is a friend though, so they can simulate different movements. Then I just raise boost until I can get in and out of the hit box. Then test tracking targets at close, mid and long ranges. Adjust boost to be as diverse as possible with all those scenarios!

Or just trust me and then fine tune lol...

If you're struggling to stay on target, lower by 50 until you're good. If you're struggling to track a target or getting stuck in the hit box, raise boost by 50 until you're good.


Is there a way to transition your code/settings onto the XIM4?

Or should I just toss my XIM4 out now and order an Apex? Cause thatís what itís looking like for everything.

There are two things you cannot do with Xim4. 1000hz and Sync off. You can mimic the rest by doing the following.

Hip - 8.5
ADS - 5.5
ADS delay - 700 (400 minimum, they feel the same)
Smooth Aim Transition [on]
Boost - 550

Unfortunately you may have to use higher boost because you can't change Hz and Sync settings. But that's as close as you can get.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Gilmani on 08:28 PM - 12/04/18
RML the last config feels better for ADS delay but its not perfect.

This config with smooth aim transition still doesn't feel right.




Man RML...for real?!😁😂
First match with the settings icebreaker gunship 75-27 win 6.5k damage.

Glad you're enjoying it.

So I only play multiplayer and I like the previous code better. So with this new one if I just turn sync off it should be better for MP?

I'll add a code for Sync Off settings. Seems a lot prefer sync off for multiplayer.

Also, just an Fyi for everyone. After some more testing I've determined that the key to the ADS delay fix is just making sure you have Smooth Aim Transition [on] and the delay value set to be longer then the slowest ADS transition in the game. Now, I'm not sure what the slowest transition time is, but I'd guess somewhere in the 300's. So I'd think you'd be safe with an ADS delay around 400. However 400 doesn't feel any different to me them 700. So I see no need to change it. The only time I have an issue with the Hip to ADS transition while smooth aim is active is when my delay is set lower then my slowest transitioning loadout.

Hope that makes sense. In short, just keep it at 700, it's fine! Lol
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: FNATIKX on 10:16 PM - 12/04/18
Smooth aim transition [on] where can I find that? I canít seem to find it
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Shredly on 10:19 PM - 12/04/18
Using default sync I felt the AA to be a bit on the stronger side in multiplayer I play zero blackout. Sync off feels great using red dot weapons swordfish with mod is my  try hard class. With this build and sync off Iím able to use the swordfish as an smg better than RMLís curves and older builds. Good job RML!
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 10:47 PM - 12/04/18
Smooth aim transition [on] where can I find that? I canít seem to find it

It's in your ADS profile, right under the delay setting.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: another1ne on 10:52 PM - 12/04/18
so the only thing i had to change was my aim transition i believe.... if i keep sync off.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: AahTist on 11:14 PM - 12/04/18
RML what do you play more of multi or blackout?
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: S13002931 on 02:16 AM - 12/05/18
Switched to Sync off, lower HIP to 60 and ADS 37.50
Very smooth, i like it.😁

Sync off is a great way to go if you're not playing Blackout. You may struggle with long sniper shots though without default Sync.

Btw... You guys are not making this easy for me, I'm really trying to stick with Default Sync so I don't have to switch configs for Blackout and other multiplayer modes. But I really like sync off as well. Default is just more diverse and also really good!


Had to raise ads to 6.5 other than that LOVE IT

Played BO4 for first time today and used the most recent profile....amazing.  Just like being on the PC.


Thanks for the feedback!

Thanks for posting one with Sync Off for  Multiplayer.   
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Rohy on 04:52 AM - 12/05/18
Been trying the new config out today with a few minor tweaks, set delay to 500 and boost to 450 with default sync and can honestly say itís perfect for me in multiplayer and blackout, thanks for all your extensive testing RML! You really outdo yourself and I couldnít thank you more for this!

~Rohy
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Helvetic on 08:22 AM - 12/05/18
are you guys liking the new code with Multiplayer or just Blackout?

Had to turn the sens down, but it's great for both blackout and multiplayer.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 10:11 AM - 12/05/18
Been trying the new config out today with a few minor tweaks, set delay to 500 and boost to 450 with default sync and can honestly say itís perfect for me in multiplayer and blackout, thanks for all your extensive testing RML! You really outdo yourself and I couldnít thank you more for this!

~Rohy

Appreciate the feedback, I do invest alot of time in this crap when I'm not happy with a games behavior. So sharing is as much for me as it is to help all of you, kind of justifies me anality in my own head lol. In the past I've primarily been a Battlefield guy so I've never spent this much time trying to dial in a COD game. BO3 was the last time I attempted, and Apex has some really cool new features that XIM4 just can't match. Blackout and BFV's POS game is the only reason I jumped into this setup 110%.  But after playing BO4 multiplayer, I have to say it's a fun game. I really like the stim pack system. I always hated the bloody screen, heavy breathing, wait to heal crap. It's still there, but atleast you feel like there's something you can do about it now. Strangely, it makes the experience alot better for me personally.

Anyways, for you folks that still enjoy other COD games, I have a challenge for you. If you like this setup, copy/paste it into any other COD game and just make minor tweaks to Boost and sensitivity. I think you'll be shocked how well this works with every COD game! As a matter of fact, BO4 is the worst one with this setup IMO. I have IW, MWR & BO3 in my library and every one of them feel like a brand new experience. MWR - Good God man, I was calling in KS constantly, literally ridiculous! I would suggest Sync Off for all of those games.


RML what do you play more of multi or blackout?


I play both about the same right now. My personal preference is Sync Off for Multiplayer and Default Sync for Blackout.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: HanSolo82 on 10:32 AM - 12/05/18
Wow big special thank you to RML for this early xmas gift. Took a few games to get used to due to the Aim Assist but I didnt have any issues getting into and out of the hitboxes. Well done sir!

Speaking of Xmas- cant wait to try these out on the Xmas Noobs.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Lastwords on 11:00 AM - 12/05/18
For anyone that plays bo4 on xbox and PC, does your xbox controls feel the same? I can't get mine to feel as fluent as my PC. When I copy and pasted it into xim and apply the curves it said SUCCESS on the button in the app but the line is still straight and not like the pictures in post. Any help is appreciated.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 12:00 PM - 12/05/18
For anyone that plays bo4 on xbox and PC, does your xbox controls feel the same? I can't get mine to feel as fluent as my PC. When I copy and pasted it into xim and apply the curves it said SUCCESS on the button in the app but the line is still straight and not like the pictures in post. Any help is appreciated.

Weíre not talking apples to apples here. XIM Apex is an Amazing product but it cannot make BO4 feel just like PC. The game development isnít even Apples to Apples. Ones made specially for a mouse and kB. The other for a controller, the look mechanics are different, thereís a turn speed limit on console and then thereís Aim Assist. You have to learn to play a little different on console. XIM does not change a games look mechanic, it works within it.

Have you read the OP lately? Everything is different, there are no curves. Boost and Smooth Aim Transition with a high Ads delay setting is what makes this setup shine. You donít need curves with this, imo. If anything though, the lack of curves will make it feel as close to PC as possible. Except for AA of course. The more Boost you add the less AA youíll feel. Too much boost though will mess up micro movements. Also, Sync off will feel closer to PC IMO, except for those darn micro movements.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Balor1712 on 12:25 PM - 12/05/18
RML, do you have both settings of AA on in the game controls?
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 03:31 PM - 12/05/18
RML, do you have both settings of AA on in the game controls?

I believe COD has Target Assist and Aim Assist (or slow down, something of that nature). Anyway's, only one affects multiplayer, the other only affects Zombies. I leave them both on.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Rohy on 03:44 PM - 12/05/18
Been trying the new config out today with a few minor tweaks, set delay to 500 and boost to 450 with default sync and can honestly say itís perfect for me in multiplayer and blackout, thanks for all your extensive testing RML! You really outdo yourself and I couldnít thank you more for this!

~Rohy

Appreciate the feedback, I do invest alot of time in this crap when I'm not happy with a games behavior. So sharing is as much for me as it is to help all of you, kind of justifies me anality in my own head lol. In the past I've primarily been a Battlefield guy so I've never spent this much time trying to dial in a COD game. BO3 was the last time I attempted, and Apex has some really cool new features that XIM4 just can't match. Blackout and BFV's POS game is the only reason I jumped into this setup 110%.  But after playing BO4 multiplayer, I have to say it's a fun game. I really like the stim pack system. I always hated the bloody screen, heavy breathing, wait to heal crap. It's still there, but atleast you feel like there's something you can do about it now. Strangely, it makes the experience alot better for me personally.

Anyways, for you folks that still enjoy other COD games, I have a challenge for you. If you like this setup, copy/paste it into any other COD game and just make minor tweaks to Boost and sensitivity. I think you'll be shocked how well this works with every COD game! As a matter of fact, BO4 is the worst one with this setup IMO. I have IW, MWR & BO3 in my library and every one of them feel like a brand new experience. MWR - Good God man, I was calling in KS constantly, literally ridiculous! I would suggest Sync Off for all of those games.


RML what do you play more of multi or blackout?


I did mess up the config of mine last night, was using the 700 delay and 550 boost without the smooth aim transition, hopefully get to see the full effects of the beast of a setup tonight haha, Iíll be sure to try out some other cods with this config and see how I go! Will be weird not healing myself though thatís for sure!
Thanks again!  ;D ;D

~Rohy
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 03:48 PM - 12/05/18
^ Man, that must have felt like crap without Smooth Aim active! I'm surprised you liked it.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Helvetic on 04:00 PM - 12/05/18
Hip and Ads sens values adapt to own needs?Much to fast for my setup.
I want to use sync off can i put some smoothing on it?

Greetz

Yes and yes.


are you guys liking the new code with Multiplayer or just Blackout?

...and correct answer is yes! Both! Lol

Hey RML, thanks for all your hard work! I'm excited to try this when I get home tonight!
Quick Question: does this work well with blackout as well?

Yes


Thanks RML for putting the time in to do this.  I just tried it and feel that I am having a hard time locking onto targets and seemed to have better initial lock on with the previous code.
I am using the code with no changes and same settings on my g502 as yours.
Not sure if I am missing something?

I raised my boost from 400 to 550. Try 400 again if that was working well for you. It will give you more Aim Assist, but make it slightly harder to move your reticle in the hit box.

This is a great comment btw. Boost and Sensitivity are subjective. If you guys are feeling too much AA the raise boost value a little. Too little AA then lower your boost a little. I'd use increments of 50.

Where is this "boost" everyone keeps referring too?
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: jeffpaw96 on 05:10 PM - 12/05/18
Hip and Ads sens values adapt to own needs?Much to fast for my setup.
I want to use sync off can i put some smoothing on it?

Greetz

Yes and yes.


are you guys liking the new code with Multiplayer or just Blackout?

...and correct answer is yes! Both! Lol

Hey RML, thanks for all your hard work! I'm excited to try this when I get home tonight!
Quick Question: does this work well with blackout as well?

Yes


Thanks RML for putting the time in to do this.  I just tried it and feel that I am having a hard time locking onto targets and seemed to have better initial lock on with the previous code.
I am using the code with no changes and same settings on my g502 as yours.
Not sure if I am missing something?

I raised my boost from 400 to 550. Try 400 again if that was working well for you. It will give you more Aim Assist, but make it slightly harder to move your reticle in the hit box.

This is a great comment btw. Boost and Sensitivity are subjective. If you guys are feeling too much AA the raise boost value a little. Too little AA then lower your boost a little. I'd use increments of 50.

Where is this "boost" everyone keeps referring too?
Enable expert config under global settings. Then click the three dots under your sensitivity on the ADS page
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Rohy on 05:16 PM - 12/05/18
I lowered my delay to 550 and it actually felt really good without smooth aim transition but it deal feel pretty @#$% at 700 without it haha but I couldnít figure out why until I jumped off and was thinking of my config and realised I hadnít turned it on yet haha
Excited to finish work and try it out tonight though with the 700 delay and transition on!

~Rohy
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Helvetic on 05:59 PM - 12/05/18

Enable expert config under global settings. Then click the three dots under your sensitivity on the ADS page
[/quote]

That's what I did and I recall seeing it in the past. Expert config mode is turned on. The options I have after expanding the menu on ADS are as follows:

Key, Delay, Smooth Aim Transition, Deactivation Keys, Aim, Ballistics Editor, Sync, Smoothing, Y/X Ratio,Turn Ratio.

No options for boost under ADS or any other page. 
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Trshy on 06:01 PM - 12/05/18

Enable expert config under global settings. Then click the three dots under your sensitivity on the ADS page

That's what I did and I recall seeing it in the past. Expert config mode is turned on. The options I have after expanding the menu on ADS are as follows:

Key, Delay, Smooth Aim Transition, Deactivation Keys, Aim, Ballistics Editor, Sync, Smoothing, Y/X Ratio,Turn Ratio.

No options for boost under ADS or any other page.
[/quote]

you need to update your xim software to the latese beta firmware. both xim apex and xim manager need to be updated
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Helvetic on 06:11 PM - 12/05/18

Enable expert config under global settings. Then click the three dots under your sensitivity on the ADS page

That's what I did and I recall seeing it in the past. Expert config mode is turned on. The options I have after expanding the menu on ADS are as follows:

Key, Delay, Smooth Aim Transition, Deactivation Keys, Aim, Ballistics Editor, Sync, Smoothing, Y/X Ratio,Turn Ratio.

No options for boost under ADS or any other page.

you need to update your xim software to the latese beta firmware. both xim apex and xim manager need to be updated
[/quote]

Right, all the options show up when I plug the Apex into the PC and run the manager.

My Apple phone says the manager is up to date, but clearly it isn't.  Trying to trouble shoot it at the moment by searching the forums.


Resolved: Didn't have the beta firmware & testflight on my phone.

Thanks for helping out.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: CameronMC on 07:31 PM - 12/05/18
Been trying the new one for Blackout (All I play) and even with changing sensitivity values so they sorta match the old Default Sync config you posted a few days back I find myself going back to the previous config

The new one while it does allow you to escape the AA bubble easier it seems to aim to the left or right of the target for me, where as the old one pretty much aims in the center of the target.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Rohy on 07:39 PM - 12/05/18
^ Man, that must have felt like crap without Smooth Aim active! I'm surprised you liked it.

Now that iím Home from work and actually tested with smooth aim transition on oh boy does it feel good! Didnít have to change anything but lower my sensitivity a little bit and itís smooth as heck! First game of blackout had a 15 kill win and a couple 100+ kill games in multiplayer, can easily say your newest default sync config is godly!
Very excited to try it out on some other cods too tonight!  ;D ;D

~Rohy
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 07:42 PM - 12/05/18
Been trying the new one for Blackout (All I play) and even with changing sensitivity values so they sorta match the old Default Sync config you posted a few days back I find myself going back to the previous config

The new one while it does allow you to escape the AA bubble easier it seems to aim to the left or right of the target for me, where as the old one pretty much aims in the center of the target.

Are you using the 224 delay setting, with SAT off?


Now that iím Home from work and actually tested with smooth aim transition on oh boy does it feel good! Didnít have to change anything but lower my sensitivity a little bit and itís smooth as heck! First game of blackout had a 15 kill win and a couple 100+ kill games in multiplayer, can easily say your newest default sync config is godly!
Very excited to try it out on some other cods too tonight!  ;D ;D

~Rohy

Glad it's working for you, let us know your experience with other COD's please. I'm curious about WWII as I don't have that one.

Thanks
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: FNATIKX on 08:36 PM - 12/05/18
I don't have the expert config option.... I believe it is only available on the beta manager etc which is only available for Apex users  :-\

so smooth aim transition is not an option for me unfortunately..  unless I'm doing something wrong?
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: sonicwall4500 on 08:47 PM - 12/05/18
I don't have the expert config option.... I believe it is only available on the beta manager etc which is only available for Apex users  :-\

so smooth aim transition is not an option for me unfortunately..  unless I'm doing something wrong?

in the manager on your phone hit the 3 dots in the upper right corner and then choose global settings. then put the check mark in enable expert configuration
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: FNATIKX on 09:25 PM - 12/05/18
(http://)
I don't have the expert config option.... I believe it is only available on the beta manager etc which is only available for Apex users  :-\

so smooth aim transition is not an option for me unfortunately..  unless I'm doing something wrong?

in the manager on your phone hit the 3 dots in the upper right corner and then choose global settings. then put the check mark in enable expert configuration
[img][/]img] (http://img)Not a valid %s URL

All it shows me when I go to ĎGlobalsí is as follows...

ĎConfig cycling hot keys: previous& nextí
ĎDisable breathe light animationsí
ĎDisable USB device hot swappingí
ĎForce games library downloadí


Thatís all.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: sonicwall4500 on 09:30 PM - 12/05/18
(http://)
I don't have the expert config option.... I believe it is only available on the beta manager etc which is only available for Apex users  :-\

so smooth aim transition is not an option for me unfortunately..  unless I'm doing something wrong?

in the manager on your phone hit the 3 dots in the upper right corner and then choose global settings. then put the check mark in enable expert configuration
[img][/]img] (http://img)Not a valid %s URL

All it shows me when I go to ĎGlobalsí is as follows...

ĎConfig cycling hot keys: previous& nextí
ĎDisable breathe light animationsí
ĎDisable USB device hot swappingí
ĎForce games library downloadí


Thatís all.


hit the 3 dots and then about.

what version are you running for both
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: CameronMC on 09:33 PM - 12/05/18
Been trying the new one for Blackout (All I play) and even with changing sensitivity values so they sorta match the old Default Sync config you posted a few days back I find myself going back to the previous config

The new one while it does allow you to escape the AA bubble easier it seems to aim to the left or right of the target for me, where as the old one pretty much aims in the center of the target.

Are you using the 224 delay setting, with SAT off?


Yeah mate, the 224 with SAT off config the one just before the new one.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: FNATIKX on 09:38 PM - 12/05/18
(http://)
I don't have the expert config option.... I believe it is only available on the beta manager etc which is only available for Apex users  :-\

so smooth aim transition is not an option for me unfortunately..  unless I'm doing something wrong?

in the manager on your phone hit the 3 dots in the upper right corner and then choose global settings. then put the check mark in enable expert configuration
[img][/]img] (http://img)Not a valid %s URL

All it shows me when I go to ĎGlobalsí is as follows...

ĎConfig cycling hot keys: previous& nextí
ĎDisable breathe light animationsí
ĎDisable USB device hot swappingí
ĎForce games library downloadí


Thatís all.


hit the 3 dots and then about.

what version are you running for both


I have,it doesnít show.

Iím on Manager 4.00.20171001
          Firmware 4.00.20171004

The latest for XIM4 from my understanding
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 11:18 PM - 12/05/18
FINATIKX, the code won't work with Xim4. Xim4 also doesn't have 1000hz polling option so the performance won't quite be the same.

Does Xim4 have progressive aim? I don't remember.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: FNATIKX on 12:24 AM - 12/06/18
FINATIKX, the code won't work with Xim4. Xim4 also doesn't have 1000hz polling option so the performance won't quite be the same.

Does Xim4 have progressive aim? I don't remember.

Negative ghost rider
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 12:43 AM - 12/06/18
 :'(
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: CameronMC on 03:57 AM - 12/06/18
Sorry yeah RML I prefer the no SAT with 224 delay default sync config you made with 500 boost, its perfect for me I hit a 20 kill quad game with it.

I guess itís just muscle memory thatís why but I only play blackout and assault rifle, never sniper.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Hacksaw1942 on 05:24 AM - 12/06/18
Thanks RML for posting the NO SYNC option!!! I just tried it on Multiplayer and it is awesome better then the previous code and better then the Sync On optional code.  Very happy with it and am running everything stock from the your code.
Thanks as always for putting in all the time and effort into this!!!!!!
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: PKRocker27 on 08:28 AM - 12/06/18
RML I love your configs for almost all the games I play. I tried the new Blackout settings,but I find myself always going back to one of your original BO4 configs with a curve. ( IDK why)  I'm a little impatient, I probably need to put in a little more time with the latest settings. I have one question with the latest config, although we have a similar play style, is there any adverse affects to raising the HIP and ADS sens a little? if so what and what can I do to keep it similar to your latest config? I took a look at your recommendations on how to match HIP and ADS and did so. Any help would be much appreciated.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 10:30 AM - 12/06/18
RML I love your configs for almost all the games I play. I tried the new Blackout settings,but I find myself always going back to one of your original BO4 configs with a curve. ( IDK why)  I'm a little impatient, I probably need to put in a little more time with the latest settings. I have one question with the latest config, although we have a similar play style, is there any adverse affects to raising the HIP and ADS sens a little? if so what and what can I do to keep it similar to your latest config? I took a look at your recommendations on how to match HIP and ADS and did so. Any help would be much appreciated.

What is it about the previous setup that makes it feel better to you? I have a feeling it's just the lesser AA. I honestly like the lesser AA feel more myself as well. But if I'm honest and just let gameplay and performance speak for itself, I get more kills and even really Rediculous kills sometimes with these settings. It's about maximizing AA not eliminating it. And it does improve my game over previous settings. Even if previous settings may have felt a little better, my aim wasn't as accurate and I couldn't stay on target as well.

Another thing I like about this new setup is that it always feels good to me when I take sometime away and then comeback. With my prior setups it always felt like I had to go through a bit of a learning curve. This is really easy to pick up with where I left off. At the very most I may adjust my sensitivity by 5-10 (Sync off) or boost by 50-100 here and there. But some of that depends on netcode, etc.

Yes, you should always feel free to adjust sensitivity to your liking. Once your sens is set, then Adjust Boost by a value of 50 at a time to tweak Aim Assist to your liking. More boost = Less AA and vice versa.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Saltman11 on 10:34 AM - 12/06/18
Hey RML,

Love your settings and curves man, always amazing to play with.

I was using your previous updated config before these settings.

My HIP sens is 3 and ADS is 2.5 with 12k DPI. Slow sens but it works awesome for me. Im confused as to what values I should put with the new updated settings since the HIP and ADS sens are soo much higher so I have no idea what new values I should put in to get the same sens. Any help would be appreciated  because I've very comfortable with my previous HIP and ADS sens.

Thanks again bud !
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 10:45 AM - 12/06/18
Hey RML,

Love your settings and curves man, always amazing to play with.

I was using your previous updated config before these settings.

My HIP sens is 3 and ADS is 2.5 with 12k DPI. Slow sens but it works awesome for me. Im confused as to what values I should put with the new updated settings since the HIP and ADS sens are soo much higher so I have no idea what new values I should put in to get the same sens. Any help would be appreciated  because I've very comfortable with my previous HIP and ADS sens.

Thanks again bud !

What's up dude?

I'm assuming you're using Default Sync. If you're happy with those settings then you should stick with it. You should try the ADS delay fix though as that's a real gamer changer for me personally and what really separates this setup from my previous one (assuming you're on the previous one and not the one before that! Lol... been quite a few. But you're using no curves correct, just boost?).

So just add the ADS delay fix - Smooth Aim Transition [on] and delay set to at least 400.

Cheers!
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 11:01 AM - 12/06/18
Sorry yeah RML I prefer the no SAT with 224 delay default sync config you made with 500 boost, its perfect for me I hit a 20 kill quad game with it.

I guess itís just muscle memory thatís why but I only play blackout and assault rifle, never sniper.

If you could, test this for me please.

- Go into a private match, no bots.
- Create your favorite AR classes (sense that's all you run, or others you may want to test).
- Make sure SAT is deactivated.
- While in game swipe your mouse at a slow to medium "consistent speed" across your mouse pad. Activate ADS and hold it for at least more then 224ms (longer then your delay setting). Try this several times and just get a good feel for how your aims behaving. Does the reticle seem to be Exactly where you feel it should be when it pops up? Do you feel any slow down or sudden lurches in turn speed?
- Now activate SAT and raise the delay value to 400-700, 400 min.
- Repeat the process above. How does it feel now?

Appreciate it if you can give it a go.

Thanks In advance.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Saltman11 on 11:08 AM - 12/06/18
Hey RML,

Love your settings and curves man, always amazing to play with.

I was using your previous updated config before these settings.

My HIP sens is 3 and ADS is 2.5 with 12k DPI. Slow sens but it works awesome for me. Im confused as to what values I should put with the new updated settings since the HIP and ADS sens are soo much higher so I have no idea what new values I should put in to get the same sens. Any help would be appreciated  because I've very comfortable with my previous HIP and ADS sens.

Thanks again bud !

What's up dude?

I'm assuming you're using Default Sync. If you're happy with those settings then you should stick with it. You should try the ADS delay fix though as that's a real gamer changer for me personally and what really separates this setup from my previous one (assuming you're on the previous one and not the one before that! Lol... been quite a few. But you're using no curves correct, just boost?).

So just add the ADS delay fix - Smooth Aim Transition [on] and delay set to at least 400.

Cheers!

Thanks for the quick reply !

I was using Sync set to common and using your ADS curve. I believe itís the one I found with all of your other profiles. I just copied your new settings and configured the ads and hip sens to something as close to what I was using. I was wondering why the HIP and ADS values  are so much higher than your previous sens of HIP 4 and ADS 2. Does it have to do with smoothing and boosting so the values increased dramatically?

Thanks as always man !
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 11:34 AM - 12/06/18
Hey RML,

Love your settings and curves man, always amazing to play with.

I was using your previous updated config before these settings.

My HIP sens is 3 and ADS is 2.5 with 12k DPI. Slow sens but it works awesome for me. Im confused as to what values I should put with the new updated settings since the HIP and ADS sens are soo much higher so I have no idea what new values I should put in to get the same sens. Any help would be appreciated  because I've very comfortable with my previous HIP and ADS sens.

Thanks again bud !

What's up dude?

I'm assuming you're using Default Sync. If you're happy with those settings then you should stick with it. You should try the ADS delay fix though as that's a real gamer changer for me personally and what really separates this setup from my previous one (assuming you're on the previous one and not the one before that! Lol... been quite a few. But you're using no curves correct, just boost?).

So just add the ADS delay fix - Smooth Aim Transition [on] and delay set to at least 400.

Cheers!

Thanks for the quick reply !

I was using Sync set to common and using your ADS curve. I believe itís the one I found with all of your other profiles. I just copied your new settings and configured the ads and hip sens to something as close to what I was using. I was wondering why the HIP and ADS values  are so much higher than your previous sens of HIP 4 and ADS 2. Does it have to do with smoothing and boosting so the values increased dramatically?

Thanks as always man !

No, they're different because of the Sync Settings. Neither of the codes I posted are for Common Sync. Ones for Default and ones for Sync Off.

You haven't been around in a bit man, everything has changed. No curves! If you want to use common you'll have to divide Default settings by 8 and Sync Off settings by 16. Common will make Aim Assist stronger though. I would suggest creating a New BO4 config and adding my new settings to it. Now test side by side with your current setup and see which works best for you.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Saltman11 on 11:42 AM - 12/06/18
Hahaha no wonder I was so confused ! I found your second updated settings and stuck with it cause it was just too good for me. Thanks for clearing it up for me man. Gonna do just that and see how it goes  :D
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: PKRocker27 on 12:38 PM - 12/06/18
RML I love your configs for almost all the games I play. I tried the new Blackout settings,but I find myself always going back to one of your original BO4 configs with a curve. ( IDK why)  I'm a little impatient, I probably need to put in a little more time with the latest settings. I have one question with the latest config, although we have a similar play style, is there any adverse affects to raising the HIP and ADS sens a little? if so what and what can I do to keep it similar to your latest config? I took a look at your recommendations on how to match HIP and ADS and did so. Any help would be much appreciated.

What is it about the previous setup that makes it feel better to you? I have a feeling it's just the lesser AA. I honestly like the lesser AA feel more myself as well. But if I'm honest and just let gameplay and performance speak for itself, I get more kills and even really Rediculous kills sometimes with these settings. It's about maximizing AA not eliminating it. And it does improve my game over previous settings. Even if previous settings may have felt a little better, my aim wasn't as accurate and I couldn't stay on target as well.

Another thing I like about this new setup is that it always feels good to me when I take sometime away and then comeback. With my prior setups it always felt like I had to go through a bit of a learning curve. This is really easy to pick up with where I left off. At the very most I may adjust my sensitivity by 5-10 (Sync off) or boost by 50-100 here and there. But some of that depends on netcode, etc.

Yes, you should always feel free to adjust sensitivity to your liking. Once your sens is set, then Adjust Boost by a value of 50 at a time to tweak Aim Assist to your liking. More boost = Less AA and vice versa.


I forgot to mention that I'm not at 12KDPI I'm running 4K. (only reason is I need to pickup a hard pad first) I feel like my aim is more on point with the older Config.. When I aim I can hit center mass dead nuts and just raise it a bit for the headshot. Even if I'm not the first to shoot I still win the fight. With the latest settings I just feel as if I'm over aiming and having to correct more often. I'll put some more time in on the new settings adjust boost to my liking.. Thanks for the quick reply!! Hope all is well with you!!
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: LastStandD on 01:12 PM - 12/06/18
Hey RML,

New settings feel super smooth, Feels like I'm playing on PC. Aim assist isn't as strong as your previous config or you tear through the AA in this config alot easier not too sure what one it is yet.

Either way the smoothest config i have used on blackout and multiplayer. Great job

Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Domenic.HRO on 01:18 PM - 12/06/18
Can i play your config better with 16k dpi?  I have the g502 hero with 16k dpi. Mybe it is better for black ops 4?
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Domenic.HRO on 01:24 PM - 12/06/18
RML maybe play Battlefield 5? If so, can you tell me which sync you can recommend and if I should use a curve? Thank you
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Dodge on 02:07 PM - 12/06/18
Can i play your config better with 16k dpi?  I have the g502 hero with 16k dpi. Mybe it is better for black ops 4?



Absolutely try it out.Hero performs outstanding with 16k DPI and the Apex.

Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: dexter1134 on 04:36 PM - 12/06/18
Hey i just got the xim apex im trying to understand ur config.
ive been trying to copy and paste ur config but i keep getting an error, i updated to the newest firmware on my pc.

when i copy and paste do I copy the entire text like where it starts xim start here or do i copy and paste after the >>


also..i use 3500 dpi with 1000 polling what would that convert to on your settings?
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Dodge on 05:06 PM - 12/06/18
Hey i just got the xim apex im trying to understand ur config.
ive been trying to copy and paste ur config but i keep getting an error, i updated to the newest firmware on my pc.

when i copy and paste do I copy the entire text like where it starts xim start here or do i copy and paste after the >>


also..i use 3500 dpi with 1000 polling what would that convert to on your settings?

  >>> XIM APEX [BO4 (Sync Off)] START COPY >>>
X5C:AAAAGgA1AC4AMAAwAC4AMgAwADEAOAAxADEAMAA5AAAAHABCAE8ANAAgACgAUwB5AG4AYwAgAE8AZgBmACkAAAwBAQAAAAAAAAAGAEgAaQBwAQAAAAAAAAEAAAAAAAAAABqQAGQAAAAAAAMAAAAAAAAAAAAAyAGQAlgDIAPoBLAFeAZABwgH0AiYCWAKKArwC7gMgA1IDhAO2A+gEGgRMBH4EsATiBRQFRgV4BaoF3AYOBkAGcgakBtYHCAc6B2wHngfQCAIINAhmCJgIygj8CS4JYAmSCcQYwRgEGCAYkAAAAAAAAAAAAAAAAAAAAECBAUAAB1MHUwUFEABoBCgBIBAawRAEEACQAhrCKAIgAGAAoAIgASBIIEQgQQAAAAAAAAAAKAQawJrAgAAAAAAAGtAAAAAAAAAAAAAAAAAAAAAAAAAABwAQQBpAG0AIABEAG8AdwBuACAAUwBpAGcAaAB0AQCgEAACvAEAAAAAAAAAABEwAGQAAAAAAAMAAAEAAAImAAAAyAGQAlgDIAPoBLAFeAZABwgH0AiYCWAKKArwC7gMgA1IDhAO2A+gEGgRMBH4EsATiBRQFRgV4BaoF3AYOBkAGcgakBtYHCAc6B2wHngfQCAIINAhmCJgIygj8CS4JYAmSCcQYwRgEGCAYkAAAAAAAAAAAAAAAAAAAAECBAUAAB1MHUwUFEABoBCgBIBAawRAEEACQAhrCKAIgAGAAoAIgASBIIEQgQQAAAAAAAAAAKAQawJrAgAAAAAAAGtAAAAAAAAAAAAAAAAAAAAAAAAAABIAQQB1AHgAaQBsAGkAYQByAHkAAGsCAQK8AQAAAAAAAAAAC7gAZAABQAIAAAAAAAAAA+gAAADIAZACWAMgA+gEsAV4BkAHCAfQCJgJYAooCvALuAyADUgOEA7YD6AQaBEwEfgSwBOIFFAVGBXgFqgXcBg4GQAZyBqQG1gcIBzoHbAeeB9AIAgg0CGYImAjKCPwJLglgCZIJxBjBGAQYIBiQAAAAAAAAAAAAAAAAAAAAQIEBQAAHUwdTBQUQAGgEKAEgEBrBEAQQAJACGsIoAiAAYACgAiABIEggRCBBAAAAAAAAAAAoBBrAmsCAAAAAAAAa0AAAAAAAAAAAAAAAAAAAAAAAAAAFgBBAHUAeABpAGwAaQBhAHIAeQAgADIAAQAAAAAAAQAAAAAAAAAABdwAZAABAAAAAAAAAAAAAAAAAADdAboClwN0BFEFLgYLBugHxQijCYAKXQs6DBcM9A3RDq4Pi5BoETAR+BLAE4gUUBUYFeAWqBdwGDgZABnIGpAbWBwgHOgdsB54n0CgIaEbomCkIqcQpxAnECcQJxCnECcQJxBjBGAQYIBiQAAAAAAAAAAAAAAAAAAAAQIEBQAAHUwdTBQUQAFAAmEBfAJhBGIQZRBgQGIgY0BqBGoCaYBqAWkBZQhlAgAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAFgBBAHUAeABpAGwAaQBhAHIAeQAgADMAAQAAAAAAAQAAAAAAAAAABdwAZAABAAAAAAAAAAAAAAAAAADIAZACWAMgA+gEsAV4BkAHCAfQCJgJYAooCvALuAyADUgOEA7YD6AQaBEwEfgSwBOIFFAVGBXgFqgXcBg4GQAZyBqQG1gcIBzoHbAeeB9AIAgg0CGYImAjKCPwJLglgCZIJxBjBGAQYIBiQAAAAAAAAAAAAAAAAAAAAQIEBQAAHUwdTBQUQAFAAmEBfAJhBGIQZRBgQGIgY0BqBGoCaYBqAWkBZQhlAgAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAFgBBAHUAeABpAGwAaQBhAHIAeQAgADQAAQAAAAAAAQAAAAAAAAAABdwAZAABAAAAAAAAAAAAAAAAAADIAZACWAMgA+gEsAV4BkAHCAfQCJgJYAooCvALuAyADUgOEA7YD6AQaBEwEfgSwBOIFFAVGBXgFqgXcBg4GQAZyBqQG1gcIBzoHbAeeB9AIAgg0CGYImAjKCPwJLglgCZIJxBjBGAQYIBiQAAAAAAAAAAAAAAAAAAAAQIEBQAAHUwdTBQUQAFAAmEBfAJhBGIQZRBgQGIgY0BqBGoCaYBqAWkBZQhlAgAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA:X5C <<< XIM APEX END COPY <<<   

Above is the Off sync config copy the whole text.

For 3500 DPI change hip to 233 and ads to 150.85.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: jeffpaw96 on 05:13 PM - 12/06/18
Hey i just got the xim apex im trying to understand ur config.
ive been trying to copy and paste ur config but i keep getting an error, i updated to the newest firmware on my pc.

when i copy and paste do I copy the entire text like where it starts xim start here or do i copy and paste after the >>


also..i use 3500 dpi with 1000 polling what would that convert to on your settings?

The error is probably because you need to update your manager app. The update is not available on google play or app store yet so you will need to sideload the apk file on android or use test flight or something on iOS (not familiar with iPhone)

New sensitivity = (current DPI x current sensitivity)/new DPI - assuming you are using the same sync as RML config. If you are using a different sync level you would need to account for that as well
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 06:11 PM - 12/06/18
Hey RML,

New settings feel super smooth, Feels like I'm playing on PC. Aim assist isn't as strong as your previous config or you tear through the AA in this config alot easier not too sure what one it is yet.

Either way the smoothest config i have used on blackout and multiplayer. Great job

Thanks for the feedback.


Hey i just got the xim apex im trying to understand ur config.
ive been trying to copy and paste ur config but i keep getting an error, i updated to the newest firmware on my pc.

when i copy and paste do I copy the entire text like where it starts xim start here or do i copy and paste after the >>


also..i use 3500 dpi with 1000 polling what would that convert to on your settings?

The error is probably because you need to update your manager app. The update is not available on google play or app store yet so you will need to sideload the apk file on android or use test flight or something on iOS (not familiar with iPhone)

New sensitivity = (current DPI x current sensitivity)/new DPI - assuming you are using the same sync as RML config. If you are using a different sync level you would need to account for that as well

Yes, you need the Beta Firmware and manager. It's linked in the OP.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 06:47 PM - 12/06/18
RML maybe play Battlefield 5? If so, can you tell me which sync you can recommend and if I should use a curve? Thank you

Just bought it for $30.00 lol... So yeah, I'll be playing it tonight!  ;D
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: dexter1134 on 12:52 AM - 12/07/18
hey so i find ur sensitivy to be way too fast...
and I play competitive where keyboarding is not allowed and I was called out on keyboarding for swiping

at what ratio should i decrease both sensitives?

just wondering if decreasing my hip i should decrease ads at the same rate
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: baadnewz on 01:20 AM - 12/07/18
I also tried your config last night. Actually I tried all your configs,before. None of them suited me. I got tired of changing polling rates,DPI,Syncs so I've decided to stay at 12K DPI, 1000 Hz. I played with your config last night and I went negative in 2 out of 5 games. NEGATIVE! With an Apex. And they weren't even that good. I don't know what I  am doing wrong. In the pre game loby against the same team,same map,I swithed to the my config. That means,12k DPI,1000 Hz polling rate,common sync and went double positive. I stayed on my settings and also went positive the next few games,then I went to bed. I don't know what I am doing wrong. I like your config because it cuts through AA very well but I don't seem to be as accurate,as I am with my config. I play 5 HIP   2,2 ADS  common sync,1000 Hz.

Can someone help me translate that into your config? I seem to reckon that at 1000 Hz going from sync common to off is your sens x 16. So that would be HIP 80   ADS 35.2. The biggest problem that I had with your config is that I get some stutter when I swipe my mouse across the mouse pad and try to center it again. That was happening before,but when I used common sync it stopped. I read that has something to do with the mouse lift off distance. But I don't understand why is so much more obvious when using SYNC OFF.



I know that when using SYNC OFF the mouse can get jittery, but I added 10 smoothing on HIP and it still feels like I get stutter when I lift my mouse. When I use Common Sync and no smoothing I don't get that stutter at all. So in other words,maybe can you post a code for Common SYNC? Or maybe help me with my problem? I don't really know if I am doing something wrong. All I know is that I play worse with that config but I like the fact that it cuts so easy  through AA.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: N1TRO on 01:21 AM - 12/07/18
This is very interesting i have been using default as it produces the best crosshair movements with the lowest aim assist possible. I have been messing with boost a lot, origionally i liked 300 as i was clinging to my normalised feeling of cursor movement rather than performance. Today i was using 900 boost and really liked it but it made aim feel a little to accelerated at times so i scaled it back to 600 and am really happy with it. If you go more in depth with default sync id highly recommended 600 boost. 400 boost did feel really good with off sync though.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: N1TRO on 01:23 AM - 12/07/18
If you want specifics of sync conversions. Default to off on 1000hz is x by 8.33, on 500hz is x by 4.165. Common to off on 1000hz is x16.66 and on 500hz is x 8.33.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Omarf826 on 01:31 AM - 12/07/18
This is very interesting i have been using default as it produces the best crosshair movements with the lowest aim assist possible. I have been messing with boost a lot, origionally i liked 300 as i was clinging to my normalised feeling of cursor movement rather than performance. Today i was using 900 boost and really liked it but it made aim feel a little to accelerated at times so i scaled it back to 600 and am really happy with it. If you go more in depth with default sync id highly recommended 600 boost. 400 boost did feel really good with off sync though.

I did something similiar to your setup, i have a g502 hero sensor and it goes up to 16k dpi, i ran RMLs settings on 16k instead of 12 and i found out for some reason their was still alot of AA so i bumped boost to 600-650, the 650 ended up being the sweet spot for my config... + on top of that i added some SAB anywhere from 40-50 max, super snappy and you still have micro movement at any range... if anyone wants my config im posting it below... (btw you dont need to add sab to this config but try 40-55 range, and change your sens obv..)



Black out 16k DPI/1000hz

>>> XIM APEX [BLACKOUT RML BO4 16kDPI (Default sync)(squads)] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Domenic.HRO on 02:04 AM - 12/07/18
RML maybe play Battlefield 5? If so, can you tell me which sync you can recommend and if I should use a curve? Thank you

Just bought it for $30.00 lol... So yeah, I'll be playing it tonight!  ;D

That's great. I know you know very well and know which configuration is best for Battlefield 5. Could you maybe share your settings this evening if you've found a good attitude? I have the g502 hero and currently play with 16000 dpi and 1000hz on sync commun without ballistic curve. I am grateful for any suggestion for improvement. Maybe tonight you can tell me which sync works best for Battlefield v. And how I should adjust the config perfectly to get the best result.thank you
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: TGC on 10:23 AM - 12/07/18

Hello everyone, I created a wingsuit and vehicle configuration that I think is much better than what I'm seeing in most tutorials. It consists of placing an activation button on some extra button on the mouse, replacing the W with that same button, increasing the sensitivity in 10 ~ 15 times, put the camera control on the WASD keys, so as soon as you press the activation button you control the Wingsuit with the WASD keys, the dive becomes much faster and less laborious than controlling with the mouse, and it is very easy to control the steering, I particularly prefer to change the W and S keys in this configuration to dive with the W like an airplane, do the test, as the vehicle is the same, press the activation key to accelerate and turn the with the A and D keys.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: JDSNatt on 01:30 PM - 12/07/18
Dumb question.. in the title it says 20181204 and I thought that was the beta firmware but I can only find 20181109 as the latest one downloadable.. am I doing something wrong?
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: damstr on 02:03 PM - 12/07/18
Dumb question.. in the title it says 20181204 and I thought that was the beta firmware but I can only find 20181109 as the latest one downloadable.. am I doing something wrong?
I believe it's just when his config was last updated in the original post.

EDIT: To clarify it has nothing to do with firmware per se so long as you are running the latest one that is mentioned.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: sonicwall4500 on 03:22 PM - 12/07/18
these settings work great for AR's sub and the rest. anyone have any specific settings for sniping. i don't do quick scope. just trying to get gold on all the weapons but the sniping rifles are really slow going for me.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Boonersooner on 07:19 PM - 12/07/18
If you want specifics of sync conversions. Default to off on 1000hz is x by 8.33, on 500hz is x by 4.165. Common to off on 1000hz is x16.66 and on 500hz is x 8.33.

Are you sure? Ive found so many different answers on this matter. Look at this thread what mist post.

 https://community.xim.tech/index.php?topic=71731.msg722835#msg722835


Just trying to get the correct info not saying your wrong cuz I found that answer you posted too!

And RML thanks for spending so much time on this for us! I have to agree this config setup is the best I've tried out or all of yours and anyone else's out there!

Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Darik on 11:42 PM - 12/07/18
hello guys
I like this config but I wanna try  a different dpi and I donít understand how to use this calc =/
Who can explain or tell me which settings  I  should use for 3200 dpi.
Thanks
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: N1TRO on 02:12 AM - 12/08/18
If you want specifics of sync conversions. Default to off on 1000hz is x by 8.33, on 500hz is x by 4.165. Common to off on 1000hz is x16.66 and on 500hz is x 8.33.

Are you sure? Ive found so many different answers on this matter. Look at this thread what mist post.

 https://community.xim.tech/index.php?topic=71731.msg722835#msg722835


Just trying to get the correct info not saying your wrong cuz I found that answer you posted too!

And RML thanks for spending so much time on this for us! I have to agree this config setup is the best I've tried out or all of yours and anyone else's out there!

Best way to explain this is slow runs at 30hz common 60hz default 120hz and off 1000hz
This makes it easier to see how they divide into each other. If you want the closest possible off sync sense from your common or default sense you should technically use 16.666 for common and 8.333 for default as this gives you an off sync value to two dp.

Hope this helps explain things. I know this subject is very unclear and there isnt really any decisive accurate answers.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 09:56 AM - 12/08/18
I also tried your config last night. Actually I tried all your configs,before. None of them suited me. I got tired of changing polling rates,DPI,Syncs so I've decided to stay at 12K DPI, 1000 Hz. I played with your config last night and I went negative in 2 out of 5 games. NEGATIVE! With an Apex. And they weren't even that good. I don't know what I  am doing wrong. In the pre game loby against the same team,same map,I swithed to the my config. That means,12k DPI,1000 Hz polling rate,common sync and went double positive. I stayed on my settings and also went positive the next few games,then I went to bed. I don't know what I am doing wrong. I like your config because it cuts through AA very well but I don't seem to be as accurate,as I am with my config. I play 5 HIP   2,2 ADS  common sync,1000 Hz.

Can someone help me translate that into your config? I seem to reckon that at 1000 Hz going from sync common to off is your sens x 16. So that would be HIP 80   ADS 35.2. The biggest problem that I had with your config is that I get some stutter when I swipe my mouse across the mouse pad and try to center it again. That was happening before,but when I used common sync it stopped. I read that has something to do with the mouse lift off distance. But I don't understand why is so much more obvious when using SYNC OFF.



I know that when using SYNC OFF the mouse can get jittery, but I added 10 smoothing on HIP and it still feels like I get stutter when I lift my mouse. When I use Common Sync and no smoothing I don't get that stutter at all. So in other words,maybe can you post a code for Common SYNC? Or maybe help me with my problem? I don't really know if I am doing something wrong. All I know is that I play worse with that config but I like the fact that it cuts so easy  through AA.

At the end of the day, you should use whatever works best for you. Based on your description, I'd say you like more Aim Assist then I do. Or at least it helps your performance. However, I feel absolutely NO Stutter when I play games with Sync Off. This sounds like a mouse or mouse pad problem.


these settings work great for AR's sub and the rest. anyone have any specific settings for sniping. i don't do quick scope. just trying to get gold on all the weapons but the sniping rifles are really slow going for me.

They also work great for Snipers with all scopes, are you having an issue?


@ Everyone, You should Not be affraid to use different sensitivities, Boost settings, Sync Settings, etc. Do what feels right to you. There are already variables in peoples setups that will make things slightly feel different then my setup. The only ones that typically like my settings as is are the folks that have almost identical setup as I do.

G502
NAV
Hard mouse Pad (Steel Series 9HD)
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Domenic.HRO on 10:20 AM - 12/08/18
RML maybe play Battlefield 5? If so, can you tell me which sync you can recommend and if I should use a curve? Thank you

Just bought it for $30.00 lol... So yeah, I'll be playing it tonight!  ;D

That's great. I know you know very well and know which configuration is best for Battlefield 5. Could you maybe share your settings this evening if you've found a good attitude? I have the g502 hero and currently play with 16000 dpi and 1000hz on sync commun without ballistic curve. I am grateful for any suggestion for improvement. Maybe tonight you can tell me which sync works best for Battlefield v. And how I should adjust the config perfectly to get the best result.thank you
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 11:07 AM - 12/08/18
Sorry Domenic, I tried the game and it felt like garbage! It's so buggy I'm afraid to even touch it!. Dice needs to fix alot with that game and the look mechanic is just a piece of it.

I have a strong feeling Mist is going to have to make another ST in the coming months (if not several) for this game. I may play some more this weekend. But overall, I'm really pissed off at this game series! They're literally destroying it!

The game plays bad (feels like you're running at about 2 mph), Looks bad (some graphics don't even render the whole match) Sounds bad, Vehicles feel horrible, and it is Buggy as @#$%!

 >:(

Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: jeffpaw96 on 02:14 PM - 12/08/18
550 boost makes shots at range with tactical rifles a little too hard to manage imo. Went back to 400 boost which is perfect at mid to long range but sometimes can get caught up in AA bubble every once in a while up close. I guess I'm left to experiment with 450 and 500 now and see what I like best :P
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 09:58 PM - 12/08/18
550 boost makes shots at range with tactical rifles a little too hard to manage imo. Went back to 400 boost which is perfect at mid to long range but sometimes can get caught up in AA bubble every once in a while up close. I guess I'm left to experiment with 450 and 500 now and see what I like best :P

Yeah, it's really about finding that happy middle ground and then just mastering the different encounters. I varied from 300-550 on BLACKOUT. But since I decided to use Default Sync with Blackout 550 feels good. Regular multi using Sync Off, 550 still feels good. But that's my sweet spot, everyone will have slight preferences, plus the differences in our setups (mouse, mouse pad, kb, etc.) It all plays into it a little As well.

That's why I keep telling everyone, fine tune, fine tune, fin e tune! ;)
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: letshoot on 10:47 AM - 12/10/18
Hello RML, I see the team release new beta firmware "20181204". If were usinng your advanced BO4 settings should we update to latest firmware and manager or stay with the 1109 update?
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: JDSNatt on 11:56 AM - 12/10/18
I seem to be getting an error code everytime I try and paste either configs for multiplayer/blackout. Both my manager and my apex are up to date
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 12:51 PM - 12/10/18
Hello RML, I see the team release new beta firmware "20181204". If were usinng your advanced BO4 settings should we update to latest firmware and manager or stay with the 1109 update?

I'm currently on the 20181204 firmware and I will be updating the Full Config codes to that firmware ASAP. My advice to everyone is to update to that build as well. There are some cool new features there, especially for RDR2 fans.


I seem to be getting an error code everytime I try and paste either configs for multiplayer/blackout. Both my manager and my apex are up to date

Make sure you update to this firmware and NEW Manager as well. I'll be updating Full config codes tonight.

https://community.xim.tech/index.php?topic=73173.0
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: another1ne on 01:19 PM - 12/10/18
Hello RML, I see the team release new beta firmware "20181204". If were usinng your advanced BO4 settings should we update to latest firmware and manager or stay with the 1109 update?

I'm currently on the 20181204 firmware and I will be updating the Full Config codes to that firmware ASAP. My advice to everyone is to update to that build as well. There are some cool new features there, especially for RDR2 fans.


I seem to be getting an error code everytime I try and paste either configs for multiplayer/blackout. Both my manager and my apex are up to date

Make sure you update to this firmware and NEW Manager as well. I'll be updating Full config codes tonight.

https://community.xim.tech/index.php?topic=73173.0

finally got my settings right im scared to update hahaha is there anything in update that is an advantage?
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 01:26 PM - 12/10/18
The update adds a deactivation delay setting and handles Aux profiles in a much better fashion. If that doesnít sound like anything that applies to you then donít worry. Although I have already updated, So everything I share going forward will be on newer firmware.

Also, share those settings man.. whatís working for you?  :)
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: Domenic.HRO on 01:33 PM - 12/10/18
Sorry Domenic, I tried the game and it felt like garbage! It's so buggy I'm afraid to even touch it!. Dice needs to fix alot with that game and the look mechanic is just a piece of it.

I have a strong feeling Mist is going to have to make another ST in the coming months (if not several) for this game. I may play some more this weekend. But overall, I'm really pissed off at this game series! They're literally destroying it!

The game plays bad (feels like you're running at about 2 mph), Looks bad (some graphics don't even render the whole match) Sounds bad, Vehicles feel horrible, and it is Buggy as @#$%!

 >:(

Did you try it again on the weekend with battlefield 5?
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 01:38 PM - 12/10/18

Did you try it again on the weekend with battlefield 5?


(https://i.imgur.com/k1FaUcl.gif)

Sorry.. couldn't do it. Maybe tmw. I have to update a bunch of stuff with new codes.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: tsdbhg on 03:57 PM - 12/10/18

Hey bud, I updated to 1204 and your configs give me error messages when I try to paste them. Was the firmware update a breaking change for current posted configs? Can you recreate them so we have something to use while you fiddle around with the new firmware? thanks bud.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 04:08 PM - 12/10/18
Hey bud, I updated to 1204 and your configs give me error messages when I try to paste them. Was the firmware update a breaking change for current posted configs? Can you recreate them so we have something to use while you fiddle around with the new firmware? thanks bud.


(https://i.imgur.com/k1FaUcl.gif)

Sorry.. couldn't do it. Maybe tmw. I have to update a bunch of stuff with new codes.

 :P


Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: S13002931 on 05:32 PM - 12/10/18
Hey bud, I updated to 1204 and your configs give me error messages when I try to paste them. Was the firmware update a breaking change for current posted configs? Can you recreate them so we have something to use while you fiddle around with the new firmware? thanks bud.


(https://i.imgur.com/k1FaUcl.gif)

Sorry.. couldn't do it. Maybe tmw. I have to update a bunch of stuff with new codes.

 :P

Hi

Are you on ps4 or xbox?  If on ps4 , are you going to  try Pubg ? If you are going to try Pubg, will you please  create configuration for Pubg ps4 ?

Thanks
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: JDSNatt on 05:46 PM - 12/10/18
Looking forward to your update on the configs!
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 05:50 PM - 12/10/18
Looking forward to your update on the configs!

I should have them all updated tonight to the new firmware/manager. I will be offering my PUBG settings soon as well. PUBG has NO Aim Assist though so it's pretty straight forward and mostly about in game settings.

I'm on Xbox
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: another1ne on 06:59 PM - 12/10/18
The update adds a deactivation delay setting and handles Aux profiles in a much better fashion. If that doesnít sound like anything that applies to you then donít worry. Although I have already updated, So everything I share going forward will be on newer firmware.

Also, share those settings man.. whatís working for you?  :)

I am just using your set up basically on MP sync off no curve but i am using 400 boost. 175 hip sense and 115 ads sense 3200 dpi.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: JDM on 07:14 PM - 12/10/18
I noticed you said you were having issues getting out of the aa bubble so you added more boost, I know you've said you've perfected your settings but what worked for me (  this also helps my extremely snappy playstyle ) was decreasing the boost and turning my ADS delay down to 30. Noticed this really early ( the lower ads delay ) but it has helped alot with takinh out multiple enemy in clutch, short period gunfights. Now all I need is better servers lol.
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: RML on 07:24 PM - 12/10/18
I noticed you said you were having issues getting out of the aa bubble so you added more boost, I know you've said you've perfected your settings but what worked for me (  this also helps my extremely snappy playstyle ) was decreasing the boost and turning my ADS delay down to 30. Noticed this really early ( the lower ads delay ) but it has helped alot with takinh out multiple enemy in clutch, short period gunfights. Now all I need is better servers lol.

Yeah, what I really meant was "I'm tired of tinkering damnit!" Lol..

In all seriousness. I'm pretty comfortable with my current settings. The boost really is for both, to get in and out of the bubble. But Hell, I've gone back to my AAA curves on occasion too and been like, "@#$%, that felt good!"

Grrrr....
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: tsdbhg on 08:08 PM - 12/10/18
BO4 1.09 patch dropped not too long ago.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 08:57 PM - 12/10/18
Updated codes for 20181204 Beta firmware/manager.


BO4 1.09 patch dropped not too long ago.

Lol... Awesome!  :'(
Title: Re: BO4 My Advanced Setup (20181210)
Post by: grman on 09:07 PM - 12/10/18
Have both manager and XIM on new beta and for the life of me canít copy this into my manager.  Brand new xim user (had every other one up to this new apex, just received today;), using my iPad with the TestFlight version (says itís the new version 1204).  Says error whenever I paste.  Any thoughts anyone?
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 09:18 PM - 12/10/18
I tested the codes, they paste fine.  :-\
Title: Re: BO4 My Advanced Setup (20181210)
Post by: grman on 09:19 PM - 12/10/18
Iím sure itís not an error on your work.  Just not sure where iím going wrong on my end.

EDIT:  Somehow it now says success!  Again, Iím sure itís on my end but I have no idea why it works now. 
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 09:25 PM - 12/10/18
Iím sure itís not an error on your work.  Just not sure where iím going wrong on my end.

I know the issue, this Beta Manager isn't out on IOS yet. You'll need and Android or computer. Takes awhile for Apple to approve new @#$%! Sry. I know Obs is waiting.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: grman on 09:31 PM - 12/10/18
Yeah, I saw that it said waiting approval and got excited when I saw the new version listed on TestFlight (I wonder what version I have?).  Anyway, it did say success on my last attempt but ended up not having curves when I looked so something is not right for sure.  Thanks for the replies and for your work on these configs!

Sidenote:it says itís the right version in TestFlight and that it was just released today, weird.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 09:40 PM - 12/10/18
No curves is right, I don't have any in this setup
Title: Re: BO4 My Advanced Setup (20181210)
Post by: tsdbhg on 09:53 PM - 12/10/18
Updated codes for 20181204 Beta firmware/manager.
Thank you. Feels great!
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 10:57 PM - 12/10/18
Updated codes for 20181204 Beta firmware/manager.
Thank you. Feels great!

Glad it works for you.  :)

For those of you that feel like you may prefer an Anti Aim Assist curve, I've added a Full Config code to the OP. Within that config are every AAA curve that I currently recommend. Please note, it is not a Full Config code for BO4! It's a generic ST and is only used as a storage config for ballistic curves. Once you paste the Full config within your library, then you should copy/paste individual curves from the AAA config into whatever game you want.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: redacted on 11:55 PM - 12/10/18
Well, I'm having a hard time deciding which config I like best now... damnit....
Title: Re: BO4 My Advanced Setup (20181210)
Post by: Statik_Kill on 12:56 AM - 12/11/18
I tested the codes, they paste fine.  :-\

Having the same issue, copy and pasting codes isnít working. They used to work, now they donít.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: grman on 01:00 AM - 12/11/18
On iOS devices (iPhone/iPad), I have to cut and past rather than copy and paste.  I copy the code to the notepad to make sure itís all there and then have to cut it rather than copy it before pasting it into the manager.  Donít know why but it works.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: Statik_Kill on 01:38 AM - 12/11/18
I fixed it by updating manager again. What does this new aim delay stuff do? I didnít see anything different from last configs besides the hip/ads. Ads delay is still at 700
Title: Re: BO4 My Advanced Setup (20181204 Final Update)
Post by: S13002931 on 03:28 AM - 12/11/18
Looking forward to your update on the configs!

I should have them all updated tonight to the new firmware/manager. I will be offering my PUBG settings soon as well. PUBG has NO Aim Assist though so it's pretty straight forward and mostly about in game settings.

I'm on Xbox

Many thanks
Title: Re: BO4 My Advanced Setup (20181210)
Post by: Steppi on 05:48 AM - 12/11/18
Hi, Rml,

first of all many thanks for your hard work ;) . Your last config is the best I ever had for the game.

My question now is, will it be necessary to update the BETA, especially after patch 1.09 or is there a serious change in the config on your part?

To be honest, I would hate to change the config again...
Title: Re: BO4 My Advanced Setup (20181210)
Post by: destined1ne on 06:15 AM - 12/11/18
Hi, Rml,

first of all many thanks for your hard work ;) . Your last config is the best I ever had for the game.

My question now is, will it be necessary to update the BETA, especially after patch 1.09 or is there a serious change in the config on your part?

To be honest, I would hate to change the config again...

https://community.xim.tech/index.php?topic=71097.msg732723#msg732723
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 08:08 AM - 12/11/18
The 20181204 update is just a firmware/Manager update.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: Trshy on 11:18 AM - 12/11/18
The 20181204 update is just a firmware/Manager update.

hello RML, have you tried the new ads sens inside the game settings? i feel like it will be better and eleminate the aim assist better? waiting for your results! thanks
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 12:05 PM - 12/11/18
I have yet to find this sensitivity adjustment in game. Is this on Xbox as well, or just PS?
Title: Re: BO4 My Advanced Setup (20181210)
Post by: Trshy on 12:09 PM - 12/11/18
I have yet to find this sensitivity adjustment in game. Is this on Xbox as well, or just PS?

i don't know if the xbox got the 15 gb update, if yes, then you should find it under control settings, i did find it on my ps.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 12:18 PM - 12/11/18
NVR mind, just found a 26gb update on my Xbox. Jeez... 26gb!

Updating now
Title: Re: BO4 My Advanced Setup (20181210)
Post by: destined1ne on 12:32 PM - 12/11/18
NVR mind, just found a 26gb update on my Xbox. Jeez... 26gb!

Updating now

That's weird, because xbox usually gets the update a week later than PS4.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: dexter1134 on 02:15 PM - 12/11/18
Waiting for your update on this new ads sens!
also with this new update do i need to paste ur settings again and change all my binds again? has anything changed?
hope it didnt break anything im updating now :(
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 02:57 PM - 12/11/18
Is it just me or does AA feel significantly weaker sense the update?  ???
Title: Re: BO4 My Advanced Setup (20181210)
Post by: redacted on 02:58 PM - 12/11/18
Feels the same to be, boss  8)
Title: Re: BO4 My Advanced Setup (20181210)
Post by: ryder553 on 03:19 PM - 12/11/18
Something feels off after this BO4 game update...
My sensitivity and aim feels way choppier and I didn't change any in-game or XIM settings.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: tsdbhg on 03:46 PM - 12/11/18
Is it just me or does AA feel significantly weaker sense the update?  ???
AA feels the same. I will say that all your previous settings I had to increase hip/ads sensitivity as it felt too slow. Your newest settings feel just fine. Maybe your using a higher sensitivity that can have an effect on how AA feels.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 03:49 PM - 12/11/18
They nerfed my fav loadout! Lol

Koshka with elo now has very little to No Aim Assist. As do all snipers I've tried so far.

Title: Re: BO4 My Advanced Setup (20181210)
Post by: Omarf826 on 04:17 PM - 12/11/18
100% they messed with the AA or mechanics of the game, the 700 delay config feels a litle off now, wasnt laser beam accurate like before, bullets dont seem to  register into the hitbox as good as before anymore. It is defintelty inconsistent from my games that i played last night on the new patch..

RML i think its time we all hit the drawing boards again 😔😣
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 04:28 PM - 12/11/18
100% they messed with the AA or mechanics of the game, the 700 delay config feels a litle off now, wasnt laser beam accurate like before, bullets dont seem to  register into the hitbox as good as before anymore. It is defintelty inconsistent from my games that i played last night on the new patch..

RML i think its time we all hit the drawing boards again 😔😣

It feels like they actually smoothed out there ADS transition. As long as you set your delay longer then the animation takes you no longer need Smooth Aim Transition.

Try using 400-500 delay with Smooth Aim Disabled.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: CameronMC on 05:18 PM - 12/11/18
20181204 vs 20181109 for Black Ops, it's all I play..
Title: Re: BO4 My Advanced Setup (20181210)
Post by: The prodigy on 05:46 PM - 12/11/18
They nerfed my fav loadout! Lol

Koshka with elo now has very little to No Aim Assist. As do all snipers I've tried so far.

There has never been any aim assist for snipers in bo4.  Unless you're quickscoping because hipfire does still have it.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 06:21 PM - 12/11/18
They nerfed my fav loadout! Lol

Koshka with elo now has very little to No Aim Assist. As do all snipers I've tried so far.

There has never been any aim assist for snipers in bo4.  Unless you're quickscoping because hipfire does still have it.

That setup used to have Aim Assist. It no longer does, trust me, I used it ALOT!
Title: Re: BO4 My Advanced Setup (20181210)
Post by: Boonersooner on 06:24 PM - 12/11/18
Is it just me or does AA feel significantly weaker sense the update?  ???


I thought the same thing.. gunna try out common when I get home or may just take out the boost all together... plus if  you dont have all the new sensitivities on max "4x" it feels pretty floaty imo... idk the whole game felt off to me and it seemed like they messed with the lighting also which didnt help my OCD lol
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 06:31 PM - 12/11/18
I honestly couldn't feel a difference between 1x and 4x. I could definitely feel .75 though.

Here's what I'm currently using with Multiplayer. Haven't had time for Blackout yet and it takes longer to setup.

Left in game settings at basically default.
Sensitivity - Insane
ADS 1x
Zoom 1x
Aim Assist on
12000 dpi, 1000 polling
Apex 1000hz
Sync Off
Hip - 68
Smoothing - 3
Ads - 48
Smoothing - 3
Ads delay - 400 (Smooth Aim Transition Off)
Boost - 1000 (not sure why, but this just felt better tonight. Strictly ARs and SMGs, no snipers. For snipers no boost and 40 Ads sens.)

That's it, was working great for me tonight. They seem to have smoothed out the aim transition in game so SAT doesn't feel needed anymore.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: dexter1134 on 06:56 PM - 12/11/18
I honestly couldn't feel a difference between 1x and 4x. I could definitely feel .75 though.

Here's what I'm currently using with Multiplayer. Haven't had time for Blackout yet and it takes longer to setup.

Left in game settings at basically default.
Sensitivity - Insane
ADS 1x
Zoom 1x
Aim Assist on
12000 dpi, 1000 polling
Apex 1000hz
Sync Off
Hip - 68
Smoothing - 3
Ads - 48
Smoothing - 3
Ads delay - 400 (Smooth Aim Transition Off)
Boost - 1000 (not sure why, but this just felt better tonight. Strictly ARs and SMGs, no snipers. For snipers no boost and 40 Ads sens.)

That's it, was working great for me tonight. They seem to have smoothed out the aim transition in game so SAT doesn't feel needed anymore.

for the boost is that only under ads? or hip? or both?
Title: Re: BO4 My Advanced Setup (20181210)
Post by: Boonersooner on 07:12 PM - 12/11/18
I honestly couldn't feel a difference between 1x and 4x. I could definitely feel .75 though.

Here's what I'm currently using with Multiplayer. Haven't had time for Blackout yet and it takes longer to setup.

Left in game settings at basically default.
Sensitivity - Insane
ADS 1x
Zoom 1x
Aim Assist on
12000 dpi, 1000 polling
Apex 1000hz
Sync Off
Hip - 68
Smoothing - 3
Ads - 48
Smoothing - 3
Ads delay - 400 (Smooth Aim Transition Off)
Boost - 1000 (not sure why, but this just felt better tonight. Strictly ARs and SMGs, no snipers. For snipers no boost and 40 Ads sens.)

That's it, was working great for me tonight. They seem to have smoothed out the aim transition in game so SAT doesn't feel needed anymore.


Really! I didnt mess around with the  in game multipliers  that much since I only play blackout but I'll give that setup using default a shot on blackout tonight and go from there! Thanks rml.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 07:30 PM - 12/11/18
Boost was just ADS.

I think the multipliers may be more beneficial for sniping in Blackout then anything else. They're not really game changing settings as ADS was all ready fast enough IMO. The fact that they seemed to have smoothed out the ADS delay is a pretty cool fix.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: Boonersooner on 07:37 PM - 12/11/18
Idk might be a dumb question but  I was thinking wouldn't it be best to use the max sensitivities  tho ? as in both ads and scope on the in game to "4x" so you have a  higher turn speed limit in the game and may help ppl not hit the cap (if they even are) ? Or am I thinking wrong?
Title: Re: BO4 My Advanced Setup (20181210)
Post by: Boonersooner on 08:01 PM - 12/11/18
Boost was just ADS.

I think the multipliers may be more beneficial for sniping in Blackout then anything else. They're not really game changing settings as ADS was all ready fast enough IMO. The fact that they seemed to have smoothed out the ADS delay is a pretty cool fix.

Your prob right! Cuz when I used the sdm it seemed slower than any other guns with a scope attached. Definitely going to look into this once I get off work for blackouts Do you still think they reduced AA in this patch? I personally thought they did or maybe I was just having a off day and it's all in my head.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 08:21 PM - 12/11/18
Idk might be a dumb question but  I was thinking wouldn't it be best to use the max sensitivities  tho ? as in both ads and scope on the in game to "4x" so you have a  higher turn speed limit in the game and may help ppl not hit the cap (if they even are) ? Or am I thinking wrong?

No sounds like a sound theory. Problem is, I honestly can't tell a difference between 1x and 4x. They literally feel the same to me. Maybe because we're already playing at max sensitivity.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: dexter1134 on 09:45 PM - 12/11/18
hey i got a question for you
i use 3500 dpi
when converting ur sens using ur calculator i find the sens to still be too high.
if i am playing on a much low dpi with 3500 dpi withfor example  130 hip and 70 ads with all ur settings like 400 delay and 1000 boost, is it the same? what can you suggest to me to change to match ur settings on a lower sens? i find it to be clunkier on this low of a setting.
but i want to play on a lower mouse seting if that makes sense. i want to have an overall lower sens but have similar settings to yours..i feel like just turning the sens down is not right
Title: Re: BO4 My Advanced Setup (20181210)
Post by: PKRocker27 on 07:34 AM - 12/12/18
I honestly couldn't feel a difference between 1x and 4x. I could definitely feel .75 though.

Here's what I'm currently using with Multiplayer. Haven't had time for Blackout yet and it takes longer to setup.

Left in game settings at basically default.
Sensitivity - Insane
ADS 1x
Zoom 1x
Aim Assist on
12000 dpi, 1000 polling
Apex 1000hz
Sync Off
Hip - 68
Smoothing - 3
Ads - 48
Smoothing - 3
Ads delay - 400 (Smooth Aim Transition Off)
Boost - 1000 (not sure why, but this just felt better tonight. Strictly ARs and SMGs, no snipers. For snipers no boost and 40 Ads sens.)

That's it, was working great for me tonight. They seem to have smoothed out the aim transition in game so SAT doesn't feel needed anymore.

I haven't played any Multi yet, but as far as Blackout is concerned I'm still using one of your original setups with a curve. I have it saved in 3 different places. ( lol ) For whatever reason it still and always feels the best to me for Blackout. Your multiplayer setting with high delay and boost has been awesome! I have had my best games since using it..
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 07:48 AM - 12/12/18
hey i got a question for you
i use 3500 dpi
when converting ur sens using ur calculator i find the sens to still be too high.
if i am playing on a much low dpi with 3500 dpi withfor example  130 hip and 70 ads with all ur settings like 400 delay and 1000 boost, is it the same? what can you suggest to me to change to match ur settings on a lower sens? i find it to be clunkier on this low of a setting.
but i want to play on a lower mouse seting if that makes sense. i want to have an overall lower sens but have similar settings to yours..i feel like just turning the sens down is not right

Lower dpi, lower sens, lower polling rates, syncs, mouse, mouse pads, NAV or KB. All of these things effect how aim feels. Unfortunately all you can do is the math and match my dpi through higher sensitivity or more boost. But it's still not going to feel exactly like mine. You'd have to have the exact same peripherals with the exact same settings to do that.

But it should be close! Lol...

My advice to everyone. When using someone else's setup, you should look at it as a foundation. If that foundation feels wobbly or just messed up from the get go, then move on IMMEDIATELY! But if that foundation feels pretty solid, then build on it. I know a lot of people are looking for a quick fix or the holy grail. I'm sorry but it rarely works that way. You're typically going to have to dial things in. And never forget, were doing all this to play games on the internet. The internet itself is a variable for many of us!

Cheers!
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 07:53 AM - 12/12/18
Another suggestion... always trial new setups offline, in private matches! Dial it in there, then take it online. If you dial in your settings online, you're going to be tweaking @#$% constantly based on your connection at the time.

Build that foundation offline, then learn the minor tweaks needed to perform better based on connection and netcode online.

All I can do is show you the tools and how I build with them.

Man... I feel like I'm creating a bunch of Xim killers out there. As if this product wasn't beast enough already! Lol
Title: Re: BO4 My Advanced Setup (20181210)
Post by: S13002931 on 08:00 AM - 12/12/18
Waiting for your pubg config   ,  Mr RML 
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 08:12 AM - 12/12/18
Waiting for your pubg config   ,  Mr RML

Sry man, haven't had time and haven't played it a ton since they raised the turn speed. It's going to be pretty simple though, so don't get your hopes too high. That games pretty basic and has no Aim Assist. The problem with it is purely look mech. Not a lot we can do about that. Also, I'm not about doing things half @#$% and it's hard to build something if you're not feeling it. But I have a setup I used back in the day (so to speak, games old to Xbox users). I'll spend some time later and see if it's still solid. I was actually enjoying BF5 last night, so there's that.   ;)

Plus I'm still working on a Blackout update.  :o
Title: Re: BO4 My Advanced Setup (20181210)
Post by: Omarf826 on 08:55 AM - 12/12/18
Waiting for your pubg config   ,  Mr RML

Sry man, haven't had time and haven't played it a ton since they raised the turn speed. It's going to be pretty simple though, so don't get your hopes too high. That games pretty basic and has no Aim Assist. The problem with it is purely look mech. Not a lot we can do about that. Also, I'm not about doing things half @#$% and it's hard to build something if you're not feeling it. But I have a setup I used back in the day (so to speak, games old to Xbox users). I'll spend some time later and see if it's still solid. I was actually enjoying BF5 last night, so there's that.   ;)

Plus I'm still working on a Blackout update.  :o

Patiently waiting on that blackout update...! (Not rlly) but yeahh release that @#$% asap! I
Title: Re: BO4 My Advanced Setup (20181210)
Post by: Omarf826 on 08:58 AM - 12/12/18
100% they messed with the AA or mechanics of the game, the 700 delay config feels a litle off now, wasnt laser beam accurate like before, bullets dont seem to  register into the hitbox as good as before anymore. It is defintelty inconsistent from my games that i played last night on the new patch..

RML i think its time we all hit the drawing boards again 😔😣

It feels like they actually smoothed out there ADS transition. As long as you set your delay longer then the animation takes you no longer need Smooth Aim Transition.

Try using 400-500 delay with Smooth Aim Disabled.

550 with SAT OFF defintelty did tweak it better for sure, but it still feels off no where near perfect, reticles tend to still lurch left or right violently at times when before they were almost laser beam and barely nudged.. seems off digging deeper..
Title: Re: BO4 My Advanced Setup (20181210)
Post by: Dodge on 08:58 AM - 12/12/18
Another suggestion... always trial new setups offline, in private matches! Dial it in there, then take it online...


Bots in privates have same AA like opponent in MP?
Title: Re: BO4 My Advanced Setup (20181210)
Post by: Haghgoy on 11:27 AM - 12/12/18
So RML, are we going to recieve an update for your excelent setup in BO4?
Title: Re: BO4 My Advanced Setup (20181210)
Post by: Domenic.HRO on 11:34 AM - 12/12/18
Waiting for your pubg config   ,  Mr RML

Sry man, haven't had time and haven't played it a ton since they raised the turn speed. It's going to be pretty simple though, so don't get your hopes too high. That games pretty basic and has no Aim Assist. The problem with it is purely look mech. Not a lot we can do about that. Also, I'm not about doing things half @#$% and it's hard to build something if you're not feeling it. But I have a setup I used back in the day (so to speak, games old to Xbox users). I'll spend some time later and see if it's still solid. I was actually enjoying BF5 last night, so there's that.   ;)

Plus I'm still working on a Blackout update.  :o

That's nice to hear that you enjoyed battlefield 5. Do you have a recommendation for me which config is the best? Thank you
Title: Re: BO4 My Advanced Setup (20181210)
Post by: Statik_Kill on 11:40 AM - 12/12/18
It has been feeling off since the update. Iím using your exact code copied and pasted for multiplayer.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: Radz108 on 12:03 PM - 12/12/18
I honestly couldn't feel a difference between 1x and 4x. I could definitely feel .75 though.

Here's what I'm currently using with Multiplayer. Haven't had time for Blackout yet and it takes longer to setup.

Left in game settings at basically default.
Sensitivity - Insane
ADS 1x
Zoom 1x
Aim Assist on
12000 dpi, 1000 polling
Apex 1000hz
Sync Off
Hip - 68
Smoothing - 3
Ads - 48
Smoothing - 3
Ads delay - 400 (Smooth Aim Transition Off)
Boost - 1000 (not sure why, but this just felt better tonight. Strictly ARs and SMGs, no snipers. For snipers no boost and 40 Ads sens.)

That's it, was working great for me tonight. They seem to have smoothed out the aim transition in game so SAT doesn't feel needed anymore.
Do you have steady aim activated and what value if on?
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 01:54 PM - 12/12/18
I never use Steady Aim.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: Shredly on 02:30 PM - 12/12/18
You using same settings with new update? Also does a lower boost help with sniping accuracy movement is fast sometimes with scope but not with a red dot.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: sheeponfire on 04:01 PM - 12/12/18
Can someone please explain how to use the full non-sync profile code. I select copy and then paste it into the xim manager app under the identity tab. When I select the paste button, it states there is an error. The light turned purple and I see BO4 sync off as the name, but the ADS section is blank and the hipfire section has nothing for turn speed.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: Boonersooner on 05:18 PM - 12/12/18
Can someone please explain how to use the full non-sync profile code. I select copy and then paste it into the xim manager app under the identity tab. When I select the paste button, it states there is an error. The light turned purple and I see BO4 sync off as the name, but the ADS section is blank and the hipfire section has nothing for turn speed.


Do you have the most updated firmware? https://community.xim.tech/index.php?topic=73173.0
Click there that's the most up to date firm.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 06:05 PM - 12/12/18
I just updated the OP with a new code for Blackout on 20181204 firmware/manager.

Here's the base settings for those of you that already have it.

In game settings.
Sens - 14 insane
ADS - 1x
High Zoom - .75x

1000hz
Sync Default
Hip - 8.5
ADS - 6.75
ADS delay - 400ms (Smooth Aim OFF)
Boost - 400

I don't use Steady Aim @#$% it and neither should you! (Just my opinion)


Title: Re: BO4 My Advanced Setup (20181210)
Post by: sheeponfire on 07:51 PM - 12/12/18
Can someone please explain how to use the full non-sync profile code. I select copy and then paste it into the xim manager app under the identity tab. When I select the paste button, it states there is an error. The light turned purple and I see BO4 sync off as the name, but the ADS section is blank and the hipfire section has nothing for turn speed.


Do you have the most updated firmware? https://community.xim.tech/index.php?topic=73173.0
Click there that's the most up to date firm.

That was my problem.... I just assumed I had the most updated version since the previous beta is only a few weeks old.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: Mongoose87 on 01:22 AM - 12/13/18
I honestly couldn't feel a difference between 1x and 4x. I could definitely feel .75 though.

Here's what I'm currently using with Multiplayer. Haven't had time for Blackout yet and it takes longer to setup.

Left in game settings at basically default.
Sensitivity - Insane
ADS 1x
Zoom 1x
Aim Assist on
12000 dpi, 1000 polling
Apex 1000hz
Sync Off
Hip - 68
Smoothing - 3
Ads - 48
Smoothing - 3
Ads delay - 400 (Smooth Aim Transition Off)
Boost - 1000 (not sure why, but this just felt better tonight. Strictly ARs and SMGs, no snipers. For snipers no boost and 40 Ads sens.)

That's it, was working great for me tonight. They seem to have smoothed out the aim transition in game so SAT doesn't feel needed anymore.

Can we adjust the in game zoom sensitivity to get a little bit of tuning for sniping without having to have a seperate Xim sniper setup? Can this be used to lessen the need to have a seperate profile with boost turned off and sensitivity slightly lowered.

Eg. would turning zoom down to 0.75x simply lower sniping sensitivity to 75% (25% reduction) of our Xim ADS setting. That obviously is a big jump and doesnít give much fine tuning. If was using in game ADS 4x instead of 1x would this allow for a bit more fine tuning. That way could set zoom at 3.5x with ADS at 4x for a less dramatic reduction (12.5% reduction instead of 25%).

Hope that rambling made some sense. Been absolutely loving you setups for Black Ops 4 every step of the way.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: Hacksaw1942 on 05:12 AM - 12/13/18
Did you update the Multiplayer code as well since the patch? Thanks!
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 06:40 AM - 12/13/18
Did you update the Multiplayer code as well since the patch? Thanks!


Yes, these were my only changes.


I honestly couldn't feel a difference between 1x and 4x. I could definitely feel .75 though.

Here's what I'm currently using with Multiplayer. Haven't had time for Blackout yet and it takes longer to setup.

Left in game settings at basically default.
Sensitivity - Insane
ADS 1x
Zoom 1x
Aim Assist on
12000 dpi, 1000 polling
Apex 1000hz
Sync Off
Hip - 68
Smoothing - 3
Ads - 48
Smoothing - 3
Ads delay - 400 (Smooth Aim Transition Off)
Boost - 1000 (not sure why, but this just felt better tonight. Strictly ARs and SMGs, no snipers. For snipers no boost and 40 Ads sens.)

That's it, was working great for me tonight. They seem to have smoothed out the aim transition in game so SAT doesn't feel needed anymore.


Can we adjust the in game zoom sensitivity to get a little bit of tuning for sniping without having to have a seperate Xim sniper setup? Can this be used to lessen the need to have a seperate profile with boost turned off and sensitivity slightly lowered.

Eg. would turning zoom down to 0.75x simply lower sniping sensitivity to 75% (25% reduction) of our Xim ADS setting. That obviously is a big jump and doesnít give much fine tuning. If was using in game ADS 4x instead of 1x would this allow for a bit more fine tuning. That way could set zoom at 3.5x with ADS at 4x for a less dramatic reduction (12.5% reduction instead of 25%).

Hope that rambling made some sense. Been absolutely loving you setups for Black Ops 4 every step of the way.

Don't know if you saw my update for Blackout. I did lower High Zoom to 75% and then compensated for this by Lowering Boost for better Micros and slightly raising ADS sensitivity in XIM to offset the 25% decrease in zoom. If you noticed for Multiplayer my sens was 48, 48/8 = 6. My ADS sensitivity in Blackout is 6.75. Here are the changes to Blackout (incase you missed it. I know this thread is busy and it's hard to keep up lol, trust me... I KNOW!  :)

I just updated the OP with a new code for Blackout on 20181204 firmware/manager.

Here's the base settings for those of you that already have it.

In game settings.
Sens - 14 insane
ADS - 1x
High Zoom - .75x

1000hz
Sync Default
Hip - 8.5
ADS - 6.75
ADS delay - 400ms (Smooth Aim OFF)
Boost - 400

I don't use Steady Aim @#$% it and neither should you! (Just my opinion)






So RML, are we going to recieve an update for your excelent setup in BO4?

They're both done and codes are updated, incase you missed it.  :P



Bots in privates have same AA like opponent in MP?

For the most part, YES! The only difference really is Strafing and other quick movements that can effect AA. That's why I said it's best to practice against a buddy in privates, but Bots will do. Then you'll have to fine tune in Multi. If you're only going against bots, my general rule of thumb is to add 10-25% more Boost to Multiplayer. Bots in multiplayer are very good for setting up your settings for Blackout and I typically don't change a thing there.

Another tip, when going against bots. I use a small map like "Nuke town" for practice when setting up for Multi and the bigger map "Ice Breaker" for setting up Blackout.


You using same settings with new update? Also does a lower boost help with sniping accuracy movement is fast sometimes with scope but not with a red dot.

I fixed this with the latest Blackout update. The settings are quoted above (you must've missed it, see a trend here folks?). I get it though, but please try to help me out here a little guys.

Thanks...  Cheers!

RML











Title: Re: BO4 My Advanced Setup (20181210)
Post by: dexter1134 on 12:59 PM - 12/13/18
If I'm playing on a much lower dpi like 3500 and a much lower sens, what settings can you suggest for me to adjust? Like what should I look to lower or increase in the xim settings to match yours.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 02:43 PM - 12/13/18
If I'm playing on a much lower dpi like 3500 and a much lower sens, what settings can you suggest for me to adjust? Like what should I look to lower or increase in the xim settings to match yours.

If you're using both Lower DPI and Lower Sensitivity, then there's no way for you to match my settings without a curve. And all that curve will be doing is pretty much raising your sensitivity. So that wouldn't even make much sense.

If your question is.. How do I lower Sensitivity and DPI and yet still overcome Aim Assist?

Then the answer is... You've just made the issue much more difficult to over come. So you need either ALOT of Boost (which will negatively affect micro movements) or an aggressive curve (which will add acceleration).

I explained this in the OP, but I use 12000 dpi because it helps over come AA a little. I use SYNC OFF, because it helps over come AA a little, I use 1000hz. because it helps over come AA a little. Then I use Boost to do the rest.

The objective would be to use as little Boost as possible because its the only one of these that will have a negative impact on Linear movement. I've taken all of these things into account, and came up with the settings I've shared. The goal being to make Aim Assist feel more manageable without degrading linear and micro movements to noticeably.

Morale of the story... The more you lower DPI and Sensitivity, the more you have to compensate with curves and boost if Aim Assist is too strong. I understand wanting to use lower DPI, I honestly Used to be "That Guy!" Od1n and myself were probably the biggest "known members" here that have spoken this way. I swore on 4000 dpi! That was my thing with my Destiny Setup. 4000 DPI, that's because I grew up with it. 12000 dpi felt jittery to me.

Then APEX came along. As an Alpha tester I was committed to test and trial running at 1000hz. At first this felt pretty Jittery to me and I had some real concerns about the quality of performance. But after about a week of playing at 1000hz. and after I realized how much better Aim Assist felt to me while playing at 1000hz. I was completely sold that this is the future of XIM! It takes performance up a few notches, it's more responsive, it cuts through AA better!

Then HE4DHUNTER convinced me to do something I swore I NEVER would do, convert to 12000 DPI. Again, at first this felt jittery to me as much or more so then 1000hz. But I learned to dial in my sensitivity with these new settings and my G502. I learned to steady my hand a little. Now, I won't stray from 12000 DPI either.

(If you don't know who HE4DHUNTER is, watch any of the Admin videos advertising a XIM product since EDGE, if it's COD, then it's HH behind the mouse. The guy is the best XIM COD player on the planet, period!)

My point is. I do these things for a reason. It made sense to me to alter my style and switch to 12000 dpi because I liked how it made AA feel for me when compared to lower DPI settings.

Aim Assist has always been my one and only Nemesis ever since I bought my first XIM and it seems to be just getting stronger with most games. So what you see in my setup is quite literally an evolution of my gaming style over the last 5 years (maybe more)! But it was a necessity for me personally. In order to make AA work for me, to my expectations and still keep linear movement as crisp and clean as possible. This setup is what I had to do.

That being said, everyone is different. This is the story behind my setup. You asked what you could do to match my settings. I don't know how to explain that to you without sharing my journey. So sorry for the long winded, ba,blah,ba blah. But that's my answer. Lol

Cheers!
Title: Re: BO4 My Advanced Setup (20181210)
Post by: jeffpaw96 on 04:22 PM - 12/13/18
Hey, I have not had a chance to get on BO4 since the update. Does the new high zoom slider affect multiplayer or only certain blackout scopes? Thanks
Title: Re: BO4 My Advanced Setup (20181210)
Post by: S13002931 on 04:43 PM - 12/13/18
People using low dpi   think   aim assist will turn into aimbot   which is  stupid.    12k dpi on hard pad 1k polling is   future :)
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 05:39 PM - 12/13/18


Hey, I have not had a chance to get on BO4 since the update. Does the new high zoom slider affect multiplayer or only certain blackout scopes? Thanks

Guys, please refrain from quoting the OP... holy cow! Thanks!

To answer the question. The high zoom adjustment only effects sniper scopes. 2 - 4x are not affected. Also, the ADS adjustment only effects turn speed if set lower then 1x. Otherwise 1x feels exactly like 4x. This is because they didn't increase the turn speed. All they did was cater to controller players that play on lower sensitivities. Now those players can adjust sensitivity higher or lower then Hip. We are already playing at max speed 14. It doesn't get any faster then that.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: bastyen on 05:59 PM - 12/13/18
If I'm playing on a much lower dpi like 3500 and a much lower sens, what settings can you suggest for me to adjust? Like what should I look to lower or increase in the xim settings to match yours.

If you're using both Lower DPI and Lower Sensitivity, then there's no way for you to match my settings without a curve. And all that curve will be doing is pretty much raising your sensitivity. So that wouldn't even make much sense.

If your question is.. How do I lower Sensitivity and DPI and yet still overcome Aim Assist?

Then the answer is... You've just made the issue much more difficult to over come. So you need either ALOT of Boost (which will negatively affect micro movements) or an aggressive curve (which will add acceleration).

I explained this in the OP, but I use 12000 dpi because it helps over come AA a little. I use SYNC OFF, because it helps over come AA a little, I use 1000hz. because it helps over come AA a little. Then I use Boost to do the rest.

The objective would be to use as little Boost as possible because its the only one of these that will have a negative impact on Linear movement. I've taken all of these things into account, and came up with the settings I've shared. The goal being to make Aim Assist feel more manageable without degrading linear and micro movements to noticeably.

Morale of the story... The more you lower DPI and Sensitivity, the more you have to compensate with curves and boost if Aim Assist is too strong. I understand wanting to use lower DPI, I honestly Used to be "That Guy!" Od1n and myself were probably the biggest "known members" here that have spoken this way. I swore on 4000 dpi! That was my thing with my Destiny Setup. 4000 DPI, that's because I grew up with it. 12000 dpi felt jittery to me.

Then APEX came along. As an Alpha tester I was committed to test and trial running at 1000hz. At first this felt pretty Jittery to me and I had some real concerns about the quality of performance. But after about a week of playing at 1000hz. and after I realized how much better Aim Assist felt to me while playing at 1000hz. I was completely sold that this is the future of XIM! It takes performance up a few notches, it's more responsive, it cuts through AA better!

Then HE4DHUNTER convinced me to do something I swore I NEVER would do, convert to 12000 DPI. Again, at first this felt jittery to me as much or more so then 1000hz. But I learned to dial in my sensitivity with these new settings and my G502. I learned to steady my hand a little. Now, I won't stray from 12000 DPI either.

(If you don't know who HE4DHUNTER is, watch any of the Admin videos advertising a XIM product since EDGE, if it's COD, then it's HH behind the mouse. The guy is the best XIM COD player on the planet, period!)

My point is. I do these things for a reason. It made sense to me to alter my style and switch to 12000 dpi because I liked how it made AA feel for me when compared to lower DPI settings.

Aim Assist has always been my one and only Nemesis ever since I bought my first XIM and it seems to be just getting stronger with most games. So what you see in my setup is quite literally an evolution of my gaming style over the last 5 years (maybe more)! But it was a necessity for me personally. In order to make AA work for me, to my expectations and still keep linear movement as crisp and clean as possible. This setup is what I had to do.

That being said, everyone is different. This is the story behind my setup. You asked what you could do to match my settings. I don't know how to explain that to you without sharing my journey. So sorry for the long winded, ba,blah,ba blah. But that's my answer. Lol

Cheers!

Hello RML,
I have a roccat tyon and the max dpi is 8200
So, can I use your settings and just adjust the ADS and HIP sensitivity or it is more complex ?
Regards
S
Title: Re: BO4 My Advanced Setup (20181210)
Post by: CameronMC on 06:05 PM - 12/13/18
HE4DHUNTER was known to use Sync Off for World War 2 CoD but I wonder what his Sync would have been for Blackout, only asking because I only play Blackout.. currently using Default Sync and it works great.

But I mean he is the XIM GOD so there must have been a reason for Sync Off
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 06:11 PM - 12/13/18
Hello RML,
I have a roccat tyon and the max dpi is 8200
So, can I use your settings and just adjust the ADS and HIP sensitivity or it is more complex ?
Regards
S

Yes you can, you will feel slightly more Aim Assist then I do. However, you never know, that may be your sweet spot. Most seem to like slightly more AA then I do. If AA is too weak or strong, then lower or raise the Boost value 100 at a time until it feels acceptable to you. Then fine tune boost by 50 at a time from there.


HE4DHUNTER was known to use Sync Off for World War 2 CoD but I wonder what his Sync would have been for Blackout, only asking because I only play Blackout.. currently using Default Sync and it works great.

But I mean he is the XIM GOD so there must have been a reason for Sync Off

Same reason he used 12000 dpi... it's more responsive and cuts through Aim Assist better then other settings without Boost or Curves.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: ianscott87 on 06:21 PM - 12/13/18
Sorry for my english i'm French but the France topic is dead 😭
I have some questions
Config for Apex is the same for Xim4 or there are some diffťrences ? I've got the xim4
What is better low DPI ex 800 or High DPI 12000 (G502) ?
Someone can give me the better config (mouse configuration and curve) ?
Thanks a lot for your help 👍
Title: Re: BO4 My Advanced Setup (20181210)
Post by: letshoot on 06:31 PM - 12/13/18
Hey RML, why should we turn SAT off now it feels fine on. Is there something we need to know?
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 06:39 PM - 12/13/18
Sorry for my english i'm French but the France topic is dead 😭
I have some questions
Config for Apex is the same for Xim4 or there are some diffťrences ? I've got the xim4
What is better low DPI ex 800 or High DPI 12000 (G502) ?
Someone can give me the better config (mouse configuration and curve) ?
Thanks a lot for your help 👍

Read through the OP for my take. For other opinions you'll have to search the forum.

(https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcQ1TN9Ue7qPsmH0N0EEnsRj6zRwCY7-gUX2HVI0TjyPPvpV4VW5-g)



Hey RML, why should we turn SAT off now it feels fine on. Is there something we need to know?


You can leave it if you want, I don't think it truly matters. I did feel a couple of times I had this weird lurch in movement during the ADS transition when Aiming at a target from certain angles in CQC. I'm not sure it's related to SAT, it's more then likely a flaw with the games look mechanic. But I haven't experienced it so far with SAT disabled.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: letshoot on 06:44 PM - 12/13/18
thanks man lastly should i keep my ads delay at 400 or the games default which is 224?

i dont noticed a difference
Title: Re: BO4 My Advanced Setup (20181210)
Post by: Obie_1_Kenobi on 06:48 PM - 12/13/18
Great Work RML!

This setup has been the best pc feel experience I have had to date! I have always ran max dpi and felt it worked better for me since xim3 days. Had the G502 "12000 dpi" for a while and decided to look into a similar mouse with a little higher dpi and there it was. Just picked up a G502 Hero which is at 16000 dpi and works better in my experience.The AA is still there. Can even breakout of the AA bubble better. I highly recommend it! Cheers!

Title: Re: BO4 My Advanced Setup (20181210)
Post by: another1ne on 07:05 PM - 12/13/18
People using low dpi   think   aim assist will turn into aimbot   which is  stupid.    12k dpi on hard pad 1k polling is   future :)

my mouse only goes to 3200 dpi... and i will not change mice. zowie ec2a is $$$$
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 07:53 PM - 12/13/18
People using low dpi   think   aim assist will turn into aimbot   which is  stupid.    12k dpi on hard pad 1k polling is   future :)

my mouse only goes to 3200 dpi... and i will not change mice. zowie ec2a is $$$$

That is a good mouse, just not enough buttons for yours truly. DPI is subjective and some may prefer more AA then others, so it is hard to give up on a familiar peripheral. That's why I used 4000 dpi for along time, my favorite mouse would only go that high.

Just picked up a G502 Hero which is at 16000 dpi and works better in my experience.The AA is still there. Can even breakout of the AA bubble better. I highly recommend it! Cheers!

I'll probably pick one up soon. As a NAV user, I NEED the buttons!


thanks man lastly should i keep my ads delay at 400 or the games default which is 224?

i dont noticed a difference

I choose 400 because I wanted it to be longer then the longest ADS transition in the game. I believe that to be around 365. With the latest update most guns feel good no matter the setting. But 400 is safe, so I kept it there.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: tsdbhg on 09:56 PM - 12/13/18
I choose 400 because I wanted it to be longer then the longest ADS transition in the game. I believe that to be around 365. With the latest update most guns feel good no matter the setting. But 400 is safe, so I kept it there.

Your new settings aren't reflected in your posted code for multiplayer.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 10:06 PM - 12/13/18
I choose 400 because I wanted it to be longer then the longest ADS transition in the game. I believe that to be around 365. With the latest update most guns feel good no matter the setting. But 400 is safe, so I kept it there.

Your new settings aren't reflected in your posted code for multiplayer.

Strange, I'll check it.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: Dodge on 03:10 AM - 12/14/18
RML as a keyboard user would you use SAB?

Greetz
Title: Re: BO4 My Advanced Setup (20181210)
Post by: vzuke on 03:51 AM - 12/14/18
thank you very much for your config. However I try to paste your blackout config and it gave me an error in apex.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: Hacksaw1942 on 05:16 AM - 12/14/18
thank you very much for your config. However I try to paste your blackout config and it gave me an error in apex.


Make sure you are using the correct firmware for both the apex and manager. See  OP with details
Title: Re: BO4 My Advanced Setup (20181210)
Post by: Roronoa on 06:33 AM - 12/14/18
hello rml, thank you for your work and your sharing! I use your config, which I like a lot, but since the maj, I feel that assist is stronger. how to correct this? thank you
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 07:18 AM - 12/14/18
RML as a keyboard user would you use SAB?

Greetz

No, I would not. IMO, KB is superior for games like COD. SAB adds Aim Assist from everything I've read, I have not tried it though.


hello rml, thank you for your work and your sharing! I use your config, which I like a lot, but since the maj, I feel that assist is stronger. how to correct this? thank you

Sure, just raise your sensitivity a little, add boost 100 at a time or both.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: trotsky on 10:28 AM - 12/14/18
thank you very much for your config. However I try to paste your blackout config and it gave me an error in apex.


Make sure you are using the correct firmware for both the apex and manager. See  OP with details

Actually, I'm running into this issue too. I've verified that I'm running the latest beta firmware and have copied/pasted RML's configs from this post as recently as a week ago successfully. As of this AM both configs for apex result on a copy/paste error for me. Did something change that Im missing here ?
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 10:42 AM - 12/14/18
thank you very much for your config. However I try to paste your blackout config and it gave me an error in apex.


Make sure you are using the correct firmware for both the apex and manager. See  OP with details

Actually, I'm running into this issue too. I've verified that I'm running the latest beta firmware and have copied/pasted RML's configs from this post as recently as a week ago successfully. As of this AM both configs for apex result on a copy/paste error for me. Did something change that Im missing here ?


Guys, in manager where you load configs, global settings etc. There's also an option for Info, or something to that nature (I don't have my Apex here), maybe it "about". Anyways go there and it will tell you what version of firmware and manager you're running. Make sure it says 20181204 for both firmware and manager.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: slickrick on 10:52 AM - 12/14/18
Hi RML. so I understend it a little more. If I increase boost will it increase AA or lower?
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 11:03 AM - 12/14/18
Hi RML. so I understend it a little more. If I increase boost will it increase AA or lower?

Higher the Boost = Lower Aim Assist. However, high Boost level will degrade micro movements. That's why I use alot of variables to combat AA and not just Boost.

Title: Re: BO4 My Advanced Setup (20181210)
Post by: trotsky on 11:05 AM - 12/14/18
thank you very much for your config. However I try to paste your blackout config and it gave me an error in apex.


Make sure you are using the correct firmware for both the apex and manager. See  OP with details

Actually, I'm running into this issue too. I've verified that I'm running the latest beta firmware and have copied/pasted RML's configs from this post as recently as a week ago successfully. As of this AM both configs for apex result on a copy/paste error for me. Did something change that Im missing here ?


Guys, in manager where you load configs, global settings etc. There's also an option for Info, or something to that nature (I don't have my Apex here), maybe it "about". Anyways go there and it will tell you what version of firmware and manager you're running. Make sure it says 20181204 for both firmware and manager.

Yup youre right. I have the beta installed but its one version old. Sorry didn't know where I could check it and assumed the beta firmware manager would let me know it was outdated. I guess each beta needs its own firmware manager ?
Title: Re: BO4 My Advanced Setup (20181210)
Post by: Roronoa on 12:36 PM - 12/14/18
thank you rml, I use exactly the same config as you, except sensi. so the boost is 500 ads, if I put 600 it will not degrade my micromotion?
Title: Re: BO4 My Advanced Setup (20181210)
Post by: Barry.McCockiner on 02:17 PM - 12/14/18

Yup youre right. I have the beta installed but its one version old. Sorry didn't know where I could check it and assumed the beta firmware manager would let me know it was outdated. I guess each beta needs its own firmware manager ?

That is correct, each beta firmware manager has a specific firmware version baked into the manager itself. Each release will require downloading the newest version of the firmware manager.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 03:00 PM - 12/14/18
Some Beta firmware you can use with the same Manager, some you can't. Really depends on if OBsIV changed a feature within manager itself.

I believe you can use the 1109 and 1204 firmware on the same manager. Not 100% on that though. OBsIV is the only one that can truly answer that question.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: InZaneHD on 03:56 PM - 12/14/18
Nice Job RML, i got a few questions: Using g502 12k 1000hz but the multiplayer senses was way to high for me. Should hip be 1.6x Ads?

And im using toggle aim in xim ads settings, this does not work with the 400ms delay? Is there a way to do it?
Title: Re: BO4 My Advanced Setup (20181210)
Post by: slickrick on 04:05 PM - 12/14/18
how do I copy your settings? when I hit select and copy it disappears ! I'm doing this on my laptop. do I need to do it on the phone the Xim managers on?
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 04:54 PM - 12/14/18
Nice Job RML, i got a few questions: Using g502 12k 1000hz but the multiplayer senses was way to high for me. Should hip be 1.6x Ads?

And im using toggle aim in xim ads settings, this does not work with the 400ms delay? Is there a way to do it?

You don't need to worry about ADS delay rules anymore with this game. They seem to have fixed this issue with there latest update. I would suggest setting the delay at a higher value then your Slowest transition loadout though. That's why I use 400. I think some snipers are around 300-400 to ADS when Sprinting. However, even 0 seems to work 90% of the time anymore without issue.

Also I wouldn't update to the beta firmware if you're using ADS Toggle. Another user was having issues with it that OBsIV is currently working on.

how do I copy your settings? when I hit select and copy it disappears ! I'm doing this on my laptop. do I need to do it on the phone the Xim managers on?

You can try it on your phone, or manually highlight everything in the code box and then copy.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: InZaneHD on 05:37 PM - 12/14/18
Ty RML! But when i use lets say 400ms ads and toggle it takes some time for IT to ads
Title: Re: BO4 My Advanced Setup (20181210)
Post by: HypRusAmp on 06:28 PM - 12/14/18

...Also I wouldn't update to the beta firmware if you're using ADS Toggle. Another user was having issues with it that OBsIV is currently working on.


I Toggle ADS. 
This morning after updating FW I ran into that issue:

What would happen is when I would Press ADS it resulted in:
(Brief Pause)-->Activate ADS-->(Brief Pause)-->Deactivate ADS.

The Longer the Activation Delay, the more the issue would be exaggerated.

But, I've always kept ADS Delay between 72-96...Close to these values, you won't notice any issues, so all seems to be well.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 07:39 PM - 12/14/18

...Also I wouldn't update to the beta firmware if you're using ADS Toggle. Another user was having issues with it that OBsIV is currently working on.


I Toggle ADS. 
This morning after updating FW I ran into that issue:

What would happen is when I would Press ADS it resulted in:
(Brief Pause)-->Activate ADS-->(Brief Pause)-->Deactivate ADS.

The Longer the Activation Delay, the more the issue would be exaggerated.

But, I've always kept ADS Delay between 72-96...Close to these values, you won't notice any issues, so all seems to be well.

Appreciate the Info.. Thanks!
Title: Re: BO4 My Advanced Setup (20181210)
Post by: Haghgoy on 04:15 AM - 12/15/18
I have seen just a small ďmistakeĒ in your settings for multiplayer.
As you already said you turned off smooth ads transition and you set the delay around 400 ms but still in your code they are not applied,and those setting are like your previous setup which were 700 ms and ads transition on, which i fixed that issue myself.
Was it intentional? Or it was a mistake?
Thanks again for your setup and time you put on to this
Title: Re: BO4 My Advanced Setup (20181210)
Post by: S13002931 on 05:54 AM - 12/15/18
https://youtu.be/Tqz3ZuF0ZDE

22-0 unedited   Team death match montage  with  RML'S  config    :)
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 10:10 AM - 12/15/18
I have seen just a small ďmistakeĒ in your settings for multiplayer.
As you already said you turned off smooth ads transition and you set the delay around 400 ms but still in your code they are not applied,and those setting are like your previous setup which were 700 ms and ads transition on, which i fixed that issue myself.
Was it intentional? Or it was a mistake?
Thanks again for your setup and time you put on to this

Crap, i forgot to check the code. Someone else pointed this out too.

It was unintentional and i need to update the code.

Thanks!
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 10:18 AM - 12/15/18
I updated the code for multiplayer, as a few pointed out my settings were off compared to what i posted. Thanks for that.

It should also be noted i ramped up Boost in this code to 1000 for multiplayer only! I did this because i strictly Run N Gun with SMG's and ARs in multi. If its too much for you, my old setting was 550.
Title: Re: BO4 My Advanced Setup (20181210)
Post by: ChrisV on 12:54 PM - 12/15/18
Did they changed anything in the last game update with the aim? Or with the new apex beta?  With the 109 (?) apex beta i played pretty good, but with the new 1.09 game update and the 204 apex beta i cant hit shiaaat in blackout. Is this just placebo?
Title: Re: BO4 My Advanced Setup (20181210)
Post by: redacted on 12:58 PM - 12/15/18
Did they changed anything in the last game update with the aim? Or with the new apex beta?  With the 109 (?) apex beta i played pretty good, but with the new 1.09 game update and the 204 apex beta i cant hit shiaaat in blackout. Is this just placebo?
Several users reporting similar "issues". I personally think it's placebo, but with so many chatting about it - might actually be a real issue
Title: Re: BO4 My Advanced Setup (20181210)
Post by: RML on 01:17 PM - 12/15/18
Did they changed anything in the last game update with the aim? Or with the new apex beta?  With the 109 (?) apex beta i played pretty good, but with the new 1.09 game update and the 204 apex beta i cant hit shiaaat in blackout. Is this just placebo?

The more i play the more it feels the same to me. I do have to get rid of Default Sync... its GONE! I wont listen to it any more lol.... SYNC OFF at 1000hz is so crisp and clean compared to everything else. I have to make it work witn Blackout!

Thats it, period!

Also, for Multiplayer... im removing all smoothing! Feels better and has less AA withiut it. Ill update the code again!
Title: Re: BO4 My Advanced Setup (20181210)
Post by: ChrisV on 01:23 PM - 12/15/18
GL, i ll try it if my equipment is still alive to this time. Rage mode is strong in me.
Title: Re: BO4 My Advanced Setup (20181215)
Post by: RML on 01:43 PM - 12/15/18
After removing all Smoothing, I was able to also remove all Boost.

Title: Re: BO4 My Advanced Setup (20181215)
Post by: ChrisV on 01:52 PM - 12/15/18
So is sync now off in Blackout? I guess you need to add version numbers to your first page ^^ so ppl know what config you changed.
Title: Re: BO4 My Advanced Setup (20181215)
Post by: Davano on 03:48 PM - 12/15/18
Is the blackout code updated with sync off on the first page?
Title: Re: BO4 My Advanced Setup (20181215)
Post by: Dodge on 04:04 PM - 12/15/18
@RML why do you prefer boost instead of SA?I have dealt with it today for the first longer time and could firstly determine no negative effect with the given values but secondly already a positive about AA.My problem with boost is that i cant find any value that satisfies me completely for all situations.
I also have to adapt to changed boost values ​​over and over again which somehow with SA is also different as I believe.
That's why I thought I'd just ask you

Greetz and thanks in advance.
Title: Re: BO4 My Advanced Setup (20181215)
Post by: RML on 04:58 PM - 12/15/18
So is sync now off in Blackout? I guess you need to add version numbers to your first page ^^ so ppl know what config you changed.

Not yet, working on some new settings for Blackout.


@RML why do you prefer boost instead of SA?I have dealt with it today for the first longer time and could firstly determine no negative effect with the given values but secondly already a positive about AA.My problem with boost is that i cant find any value that satisfies me completely for all situations.
I also have to adapt to changed boost values ​​over and over again which somehow with SA is also different as I believe.
That's why I thought I'd just ask you

Greetz and thanks in advance.

I dont like the way SA affects my movement, everything feels floaty to me with SA. But everyones different. I like Super Responsive movement.

Im currently not using SA or Boost. I removed all Smoothing as well and raised my sens slightly.

Currently testing these settings in both Multi and Blackout, if anyone wants to give it a go.


1000hz. 800 DPI - Because it feels snappy like SYNC OFF but doesnt mess with micro movements as much as SYNC OFF.
Code: [Select]
>>> XIM APEX [BLACKOUT ] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<< 
Title: Re: BO4 My Advanced Setup (20181215)
Post by: Deazly on 05:25 PM - 12/15/18
Thanks for the AAA Curve ST!  Awesome share!

This might need its own post and a sticky! Tutorial section or ?... anyhow. Thanks.
Title: Re: BO4 My Advanced Setup (20181215)
Post by: Dodge on 05:33 PM - 12/15/18
Quote
1000hz. 800 DPI - Because it feels snappy like SYNC OFF but doesnt mess with micro movements as much as SYNC OFF.   

mad was about to go to bed.😆will turn a few rounds against bots.
Title: Re: BO4 My Advanced Setup (20181215)
Post by: RML on 05:40 PM - 12/15/18
Quote
1000hz. 800 DPI - Because it feels snappy like SYNC OFF but doesnt mess with micro movements as much as SYNC OFF.   

mad was about to go to bed.😆will turn a few rounds against bots.

Lol.. if youre tired youll probably want to stay away from this, its a bit fast. But im really liking it fir multiplayer. May have to turn it down a notch for Blackout.



Thanks for the AAA Curve ST!  Awesome share!

This might need its own post and a sticky! Tutorial section or ?... anyhow. Thanks.

Alot of TLC in that ST  :D
Title: Re: BO4 My Advanced Setup (20181215)
Post by: Dodge on 05:58 PM - 12/15/18
is fast but still goes against bots.In the heat of a battle i am not sure.
🤣
Also crisp though only 800 DPI and nothing else.
Hmmm...and AA bubble with ease to enter.
Title: Re: BO4 My Advanced Setup (20181215)
Post by: Cantijustchooseausername on 06:01 PM - 12/15/18
Im trying to copy and paste but it doesnt let me? Im on the latest update that you provided. What am i doing wrong
Title: Re: BO4 My Advanced Setup (20181215)
Post by: RML on 06:07 PM - 12/15/18
is fast but still goes against bots.In the heat of a battle i am not sure.
🤣
Also crisp though only 800 DPI and nothing else.
Hmmm...and AA bubble with ease to enter.

Right now, yes. Thats the only DPI that felt snappy to me with the higher sensitivity. The rest get kind of floaty. This feels more like Sync Off but with better micros.

These same settings feel pretty nice in Infinite warfare and MWR.
Title: Re: BO4 My Advanced Setup (20181215)
Post by: tsdbhg on 06:07 PM - 12/15/18
1000hz. 800 DPI - Because it feels snappy like SYNC OFF but doesnt mess with micro movements as much as SYNC OFF.

You went from 12k DPI to 800?
Title: Re: BO4 My Advanced Setup (20181215)
Post by: RML on 06:08 PM - 12/15/18
1000hz. 800 DPI - Because it feels snappy like SYNC OFF but doesnt mess with micro movements as much as SYNC OFF.

You went from 12k DPI to 800?

Lol... crazy, right?

Its a test, Kind of an explanation in my last post.
Title: Re: BO4 My Advanced Setup (20181215)
Post by: Dodge on 06:17 PM - 12/15/18
With a faster cloth pad instead of a hard pad, it feels really good
Title: Re: BO4 My Advanced Setup (20181215)
Post by: tsdbhg on 06:22 PM - 12/15/18
Lol... crazy, right?

Its a test, Kind of an explanation in my last post.

I'm trying it and something doesn't feel right  Without smoothing, the aim in multiplayer feels very jittery, especially more so with hip.
Title: Re: BO4 My Advanced Setup (20181215)
Post by: RML on 09:03 PM - 12/15/18
Lol... crazy, right?

Its a test, Kind of an explanation in my last post.

I'm trying it and something doesn't feel right  Without smoothing, the aim in multiplayer feels very jittery, especially more so with hip.

Yeah, theres more then one way to skin a cat. I can see this being too responsive for some (jittery). Actually feels kind of like PC to me though, tbh.

This is my setup for IW and MWR. Feels awesome with those games, trying to tweak it for BO4, AA in this game is just bonkers. So many different ranges to deal with.
Title: Re: BO4 My Advanced Setup (20181215)
Post by: letshoot on 09:26 PM - 12/15/18
RML, bro i was just starting to love 12000 DPI haha. What made you switch to 800 im always down to experiment with you haha!

And did you make that switch for multiplayer or just blackout
Title: Re: BO4 My Advanced Setup (20181215)
Post by: RML on 09:53 PM - 12/15/18
RML, bro i was just starting to love 12000 DPI haha. What made you switch to 800 im always down to experiment with you haha!

And did you make that switch for multiplayer or just blackout

Just testing some things. There was an interesting setup created by another user. Got me thinking, 800 dpi has a strange effect on things. Im trying to get my sensitivity as high as i can "comfortably" to combat AA without boost. Higher sensitivity feels better to me at 800 dpi when using Default Sync.
Title: Re: BO4 My Advanced Setup (20181215)
Post by: N1TRO on 08:30 AM - 12/16/18
Really I'm also using higher sensitivities I will give 800dpi a try again and leave feedback here.
Title: Re: BO4 My Advanced Setup (20181215)
Post by: Haghgoy on 09:51 AM - 12/16/18
I used your latest code in the first page which doesnít have boost and SA, but man its so jttery, it shakes a lot.
Have you come up with anything better?
Title: Re: BO4 My Advanced Setup (20181215)
Post by: RML on 09:59 AM - 12/16/18
Really I'm also using higher sensitivities I will give 800dpi a try again and leave feedback here.

So far it seems to be a game specific thing. What I mean is, the exact settings I posted to test, I use in Infinite Warfare and it works perfectly. As a matter of fact it works so well Iím literally enjoying that game for the first time. Itís hard not to play, my aim is that @#$% good.

A similar setup also works extremely well in BFV. But that game literally has NO Aim Assist.

However, I havenít been able to quite dial this in with BO4 yet. Partially because Iím slightly burned out on testing and tweaking and IW is so @#$% fun to play with those settings. Iím getting some insane results and itís so consistent. Iím also getting pretty frustrated with BO4 servers. I honestly believe theyíre the biggest reason Iím not enjoying the game that much. Iím getting consistent connection errors and my hit registration and tracking feel different on a hour to hour basis.

Bottom line is, When the connection is solid my setup feels solid. But that doesnít seem to be very consistent. The games kind of a mess right now IMO.


I used your latest code in the first page which doesnít have boost and SA, but man its so jttery, it shakes a lot.
Have you come up with anything better?

Just add smoothing back to it and maybe lower your sens a little. It doesnít feel jittery to me tbh. But like I said in the OP, I tested 1000hz and Sync Off for along time so I became accustomed to it. And itís the purest way to cut through AA.

In the past, when I first started using Sync off, I used between 5-8 smoothing. That removes the jitter, but also adds more AA and makes movement feel more washed out and less responsive to me.

You can also try using 500hz and see if it helps.
Title: Re: BO4 My Advanced Setup (20181215)
Post by: ChrisV on 10:03 AM - 12/16/18
I use now
hip:
1000hz
12k dpi
sync off
boost 200
sens 85
x/y ratio 1,25

ads
sens 85
sync off
x/y ratio 1,25

works okay for me
Title: Re: BO4 My Advanced Setup (20181215)
Post by: RML on 10:15 AM - 12/16/18
Thanks ChrisV, why the x/y ratio change to Hip?
Title: Re: BO4 My Advanced Setup (20181215)
Post by: ChrisV on 10:42 AM - 12/16/18
Thanks ChrisV, why the x/y ratio change to Hip?

r6s days, just old behavior i guess.
Title: Re: BO4 My Advanced Setup (20181215)
Post by: ceebs on 11:23 AM - 12/16/18
I've tweaked your config a little and I can honestly say, this is the most PC-like experience I've had in BO4. Very fluid with a tiny bit of AA, but no bubble effect and crisp, snappy aim.

Thank you.

Manager 1000Hz
Mouse 1000Hz
DPI 3200

Hip 250
Sync Off
Smoothing 4
Y/X 1.25
SA 0
Boost 0

ADS 150
Activation Delay 400
SAT Off
My own 'Sniper' BC (https://community.xim.tech/index.php?topic=71233.msg724303#msg724303)
Sync Off
Smoothing 3
Y/X Ratio 1.25
SA 0
Boost 0


Title: Re: BO4 My Advanced Setup (20181215)
Post by: RML on 11:26 AM - 12/16/18
Thanks ChrisV, why the x/y ratio change to Hip?

r6s days, just old behavior i guess.

I see, yeah everyone has a diffferent feel, no hurt in that.



I've tweaked your config a little and I can honestly say, this is the most PC-like experience I've had in BO4. Very fluid with a tiny bit of AA, but no bubble effect and crisp, snappy aim.

Thank you.

Manager 1000Hz
Mouse 1000Hz
DPI 3200

Hip 250
Sync Off
Smoothing 4
Y/X 1.25
SA 0
Boost 0

ADS 150
Activation Delay 400
SAT Off
My own 'Sniper' BC (https://community.xim.tech/index.php?topic=71233.msg724303#msg724303)
Sync Off
Smoothing 3
Y/X Ratio 1.25
SA 0
Boost 0




Thanks ceebs, The sniper curve is interesting. Ive done things similar in the past but struggled with tracking and getting in the bubble sometimes. I think that was Xim4 though. I dont believe ive experimented with it much at 1000hz and Sync Off. Ill give it a try later.
Title: Re: BO4 My Advanced Setup (20181215)
Post by: RML on 03:00 PM - 12/16/18
Alright, so after going back to the drawing board and trying all kinds of new ideas. Ive found that ive pretty much come full circle. I think ive found some better settings though that meet the needs for both Multi and Blackout. This should allow atleast most of you to be able to use Sync Off without the Jitters.

Here it is.
In game sens 14
Ads 1x
High zoom .75
12000 DPI
1000hz
Sync off
Hip 68,
Smoothing 8
Ads delay 400 SAT off
Ads 50
Smoothing 8
Boost 600

Code: [Select]
  >>> XIM APEX [BLACKOUT ] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<   

Title: Re: BO4 My Advanced Setup (20181216)
Post by: Deazly on 03:24 PM - 12/16/18
And DPI? =].

Nm. I see it. 12k
Title: Re: BO4 My Advanced Setup (20181216)
Post by: N1TRO on 03:58 PM - 12/16/18
hi rml i did a bunch of testing. firstly regarding 800dpi with the new xim apex features. i still do not like 800dpi as it feels like mouse movements are imperfect. this is the same reason i do not use under 1600dpi on pc. 3200dpi or 4500 will always be my go tos for xim apex.
 
Also in regards to to overwatch and lowering the aim assist strength it seems to me that the same problems you get with full strength still occur with lower values you just have overall less aim assist so for overwatch specifically full strength and a small boost value is definitely superior.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Dodge on 05:21 PM - 12/16/18
After hours of hours of testing back to a raw setting.

16K
Sync Off
1000 pol
hip 47 smoothing 4
ads 30 smoothing 4  X/Y 1.25
Ads delay 400 SAT off

For me the solution lies in the appropriate sync and higher sensitivity. For BO4 definitely also in higher DPI values but higher sensitivity beats here DPI.

...and has anyone noticed more jitter since the last firmware update or is it just me?




Title: Re: BO4 My Advanced Setup (20181216)
Post by: Hacksaw1942 on 08:01 PM - 12/16/18
I notice something is different since the update.  Everything was perfect prior with RML's settings.  Now it is feeling slightly off.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: hegsy on 08:03 PM - 12/16/18
Hey RML when i try copy paste the very last config you posted I get an error, using the beta firmware 204.

What am I doing wrong?

Cheers
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Mattie on 09:07 PM - 12/16/18
BOPS4 config
12k DPI
1000 Polling
Buttery Smooth for Twitch Shooters

S/n: I do use the cap locks activation for run n gun classes.


>>> XIM APEX [Call of Duty: Black Ops 3] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Mattie on 09:27 PM - 12/16/18
First game using and no issues in Merc TDM.

https://imgur.com/a/beHmOTt

I was using a GKS and picked up some guys ABR.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 11:26 PM - 12/16/18
Updated latest settings. (Hip was feeling off before)

Please let me know if this doesnt paste into 1204 firmware. Also make sure you update manager on your phone to 1204 as well. Multiplayer is feeling REALLY ggod again with this. Havent played much Blackout yet.

Code: [Select]
  >>> XIM APEX [BLACKOUT ] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<< 
Title: Re: BO4 My Advanced Setup (20181216)
Post by: redacted on 11:50 PM - 12/16/18
Testing on Blackout now, cheers again for all the work!
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 11:58 PM - 12/16/18
Testing on Blackout now, cheers again for all the work!

Yeah i finally got it back to where it was prior to update for me.. maybe even better. Feels nice!
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Dodge on 12:37 AM - 12/17/18
Testing on Blackout now, cheers again for all the work!

Yeah i finally got it back to where it was prior to update for me.. maybe even better. Feels nice!

Yo feels good.👍
Title: Re: BO4 My Advanced Setup (20181216)
Post by: jeffpaw96 on 12:40 AM - 12/17/18
Updated latest settings. (Hip was feeling off before)

Please let me know if this doesnt paste into 1204 firmware. Also make sure you update manager on your phone to 1204 as well. Multiplayer is feeling REALLY ggod again with this. Havent played much Blackout yet.

Code: [Select]
  >>> XIM APEX [BLACKOUT ] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<< 

What has changed with this update just now? I have just been using your one from early today as a starting point.

I bumped down smoothing to zero for hip because any value except 0 really messes with tempest aim assist (do you use this specialist at all?) Smoothing seems to make or break this and I feel it's one of the better ways to test hipfiring.

For ads the 8 smoothing and 600 boost was good for 90% of gunfights but there were times when I would get stuck in the mud on fast moving smg players (even on 12k/70ads/hardpad). I fixed this by lowering smoothing to 4 and decreased boost to 550 to compensate for micros and this really seems to work at all ranges. My issue has always been that smg/AR feel great but tactical rifle was too hard to use at range. These values have worked for every setup I have now.

Thank you again for all your groundwork.... It really makes a huge difference and has helped me to both learn about and tune my own settings very nicely!
Title: Re: BO4 My Advanced Setup (20181216)
Post by: redacted on 01:37 AM - 12/17/18
Testing on Blackout now, cheers again for all the work!

Yeah i finally got it back to where it was prior to update for me.. maybe even better. Feels nice!

Blackout test was a success! New favorite config :D I'm even starting to become accustomed to the RML high-sens.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: domontaco on 04:29 AM - 12/17/18
I'm pretty surprised at how well I'm doing with these settings. I bought the game like a week ago and am at rank 50 now. I usually do 1.0-1.5, my last 10 game avg is 1.4.

First game with RML's settings I did 12-7. I know its not very good but it felt above average for me.

Then I tweaked it since something felt a bit off and used Jeffpaw96 's tweak - changed ADS to 4 smoothing and 550 boost. Then I had a 28-4 game. This was with an Auger running High Caliber 1 and long barrel only lol. Both the 12-7 game and the 28-4 game were with the same lobby on the same map and both with the Auger. This setup rocks.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 07:02 AM - 12/17/18


Code: [Select]
  >>> XIM APEX [BLACKOUT ] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<< 


What has changed with this update just now? I have just been using your one from early today as a starting point.

I bumped down smoothing to zero for hip because any value except 0 really messes with tempest aim assist (do you use this specialist at all?) Smoothing seems to make or break this and I feel it's one of the better ways to test hipfiring.

For ads the 8 smoothing and 600 boost was good for 90% of gunfights but there were times when I would get stuck in the mud on fast moving smg players (even on 12k/70ads/hardpad). I fixed this by lowering smoothing to 4 and decreased boost to 550 to compensate for micros and this really seems to work at all ranges. My issue has always been that smg/AR feel great but tactical rifle was too hard to use at range. These values have worked for every setup I have now.

Thank you again for all your groundwork.... It really makes a huge difference and has helped me to both learn about and tune my own settings very nicely!

Thatís a good idea about Tempest. I havenít used him in awhile and had no idea about that. Should be easy to setup against Bots. Overall, I think weíre pretty much on the same page. My latest change was to lower hip sens and smoothing on both Hip and ADS.

Iím glad youíre learning how to use the tools, thats really what this thread is all about! Itís also about sharing and feedback, so thank you for that.

Cheers!


I'm pretty surprised at how well I'm doing with these settings. I bought the game like a week ago and am at rank 50 now. I usually do 1.0-1.5, my last 10 game avg is 1.4.

First game with RML's settings I did 12-7. I know its not very good but it felt above average for me.

Then I tweaked it since something felt a bit off and used Jeffpaw96 's tweak - changed ADS to 4 smoothing and 550 boost. Then I had a 28-4 game. This was with an Auger running High Caliber 1 and long barrel only lol. Both the 12-7 game and the 28-4 game were with the same lobby on the same map and both with the Auger. This setup rocks.

Stories like this is what makes it all worthwhile. Iím glad itís helped, I know how you feel, Iíve been there. Itís a relief to find something that works for you. And it feels good knowing thereís tools out there that you can learn to use to improve your gaming experience. And again kudos to Jeffpaw for sharing!





Blackout test was a success! New favorite config :D I'm even starting to become accustomed to the RML high-sens.

Thanks for testing and for the feedback, Iím glad itís working for you. Iím relieved to be back to a good point and looking forward to destroying some lobbyís for awhile.

And Dodge, I appreciate you as well!

Cheers!

Title: Re: BO4 My Advanced Setup (20181216)
Post by: bastyen on 07:04 AM - 12/17/18
Updated latest settings. (Hip was feeling off before)

Please let me know if this doesnt paste into 1204 firmware. Also make sure you update manager on your phone to 1204 as well. Multiplayer is feeling REALLY ggod again with this. Havent played much Blackout yet.

Code: [Select]
  >>> XIM APEX [BLACKOUT ] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<< 

Hello
It is for blackout only?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 07:08 AM - 12/17/18
Updated latest settings. (Hip was feeling off before)

Please let me know if this doesnt paste into 1204 firmware. Also make sure you update manager on your phone to 1204 as well. Multiplayer is feeling REALLY ggod again with this. Havent played much Blackout yet.

Code: [Select]
  >>> XIM APEX [BLACKOUT ] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<< 

Hello
It is for blackout only?

No actually setup in multiplayer. But Iíll be using in both. I should probably change the title huh? Lol

Thanks!
Title: Re: BO4 My Advanced Setup (20181216)
Post by: BFlamboyant on 07:35 AM - 12/17/18
I get an error when trying to paste it, just updated my xim apex with the latest beta software, i just wanted to use it to check if u use any curves now at all and what the amount of smoothing you are currently using with sync off
Title: Re: BO4 My Advanced Setup (20181216)
Post by: tsdbhg on 09:16 AM - 12/17/18
I get an error when trying to paste it, just updated my xim apex with the latest beta software, i just wanted to use it to check if u use any curves now at all and what the amount of smoothing you are currently using with sync off
If I had a nickel for every person that posts this. You need to update the manager. The new firmware doesn't work with the old manager.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: BFlamboyant on 10:59 AM - 12/17/18
I get an error when trying to paste it, just updated my xim apex with the latest beta software, i just wanted to use it to check if u use any curves now at all and what the amount of smoothing you are currently using with sync off
If I had a nickel for every person that posts this. You need to update the manager. The new firmware doesn't work with the old manager.

yeah im sorry, just wanted to edit i found out how to do it
Title: Re: BO4 My Advanced Setup (20181216)
Post by: jeffpaw96 on 02:16 PM - 12/17/18
Updated latest settings. (Hip was feeling off before)

Please let me know if this doesnt paste into 1204 firmware. Also make sure you update manager on your phone to 1204 as well. Multiplayer is feeling REALLY ggod again with this. Havent played much Blackout yet.

Code: [Select]
  >>> XIM APEX [BLACKOUT ] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<< 

Hello
It is for blackout only?

No actually setup in multiplayer. But Iíll be using in both. I should probably change the title huh? Lol

Thanks!
One more day to enjoy this game on xbox before I decide if zero makes me delete it >_<. I'm already getting super frustrated by seekers, mines, 9bang, grav slam, ballistic shield, war machine, cluster grenades, armor, reactor core, attack dog, barbed wires, flashlight shotgun, etc. Just typing that out makes me realize how much BS is truly in this game designed to end your kill streak. And now for playing well you are rewarded by...... your streaks turning against you or destroyed altogether with one button press? This game is giving me gray hair....
Title: Re: BO4 My Advanced Setup (20181216)
Post by: tsdbhg on 04:49 PM - 12/17/18
One more day to enjoy this game on xbox before I decide if zero makes me delete it >_<. I'm already getting super frustrated by seekers, mines, 9bang, grav slam, ballistic shield, war machine, cluster grenades, armor, reactor core, attack dog, barbed wires, flashlight shotgun, etc. Just typing that out makes me realize how much BS is truly in this game designed to end your kill streak. And now for playing well you are rewarded by...... your streaks turning against you or destroyed altogether with one button press? This game is giving me gray hair....

Actually the ability requires 2 button press to bring up the hack menu and then a 3rd button to activate it. I agree that Zero is by far the worst aspect of this game. A lot of other posts and reviewers are saying the same thing.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Davano on 06:02 PM - 12/17/18
Updated latest settings. (Hip was feeling off before)

Please let me know if this doesnt paste into 1204 firmware. Also make sure you update manager on your phone to 1204 as well. Multiplayer is feeling REALLY ggod again with this. Havent played much Blackout yet.

Code: [Select]
  >>> XIM APEX [BLACKOUT ] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<< 

Anyone try this code in blackout yet? If so is it good, how does it feel?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: redacted on 06:10 PM - 12/17/18
Updated latest settings. (Hip was feeling off before)

Please let me know if this doesnt paste into 1204 firmware. Also make sure you update manager on your phone to 1204 as well. Multiplayer is feeling REALLY ggod again with this. Havent played much Blackout yet.

Code: [Select]
  >>> XIM APEX [BLACKOUT ] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<< 

Anyone try this code in blackout yet? If so is it good, how does it feel?

I love it personally. I'm not much of an AA fan, so I play with TA/AA turned off and thus, I have to move the Boost values to 0. But when I actually _DO_ play with TA/AA,  no other config feels this good.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: puinsai on 06:12 PM - 12/17/18
Updated latest settings. (Hip was feeling off before)

Please let me know if this doesnt paste into 1204 firmware. Also make sure you update manager on your phone to 1204 as well. Multiplayer is feeling REALLY ggod again with this. Havent played much Blackout yet.

Code: [Select]
  >>> XIM APEX [BLACKOUT ] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<< 

Anyone try this code in blackout yet? If so is it good, how does it feel?

Nuts...!
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Mongoose87 on 07:39 PM - 12/17/18
Updated latest settings. (Hip was feeling off before)

Please let me know if this doesnt paste into 1204 firmware. Also make sure you update manager on your phone to 1204 as well. Multiplayer is feeling REALLY ggod again with this. Havent played much Blackout yet.

Code: [Select]
  >>> XIM APEX [BLACKOUT ] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<< 

Are you still using high zoom at 0.75x in game settings with this?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 08:05 PM - 12/17/18
Yes
Title: Re: BO4 My Advanced Setup (20181216)
Post by: d1sable on 08:09 PM - 12/17/18
Not been able to test it as im on holiday till Jan but maybe one of you might like to try it.

Similar to Fortnite where disabling the ADS page is generally a good move imo i think with the added ads sensitivity in game now its worth exploring to get perfect hip to ads delay transition.

Try making the in game hip x and y at something like 10 rather than 14 (insane).

Crack up your sense in the hip page so its comfortable.  Disable the ads page and then use in game ads to tweak. I appreciate with increments of 0.25 if may be less customisable and therefore might not work for everyone but it should give perfect transition.

I would personally use default sync with SAB around 50 and no other changes but again thats preference.

If anyone tries it let me know how it feels.

Cheers

Title: Re: BO4 My Advanced Setup (20181216)
Post by: another1ne on 08:44 PM - 12/17/18
So in the newest config you use No boost?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: puinsai on 08:47 PM - 12/17/18
So in the newest config you use No boost?
HIP (0) ADS (600)
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 09:35 PM - 12/17/18
So in the newest config you use No boost?
HIP (0) ADS (600)

I literally bounce around with boost depending on how my connection feels. Im typically between 300-600.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Balor1712 on 09:53 PM - 12/17/18
The new settings are killer. The game feels great. Landing shots at all times.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: puinsai on 10:36 PM - 12/17/18
So in the newest config you use No boost?
HIP (0) ADS (600)

I literally bounce around with boost depending on how my connection feels. Im typically between 300-600.

Interested !
can you explain how the connection influences the boost ?
for a ping of 92-100 ms (my best for blackout) what is the best boost for ADS, HIP always at 0 ?
thanks you
Title: Re: BO4 My Advanced Setup (20181216)
Post by: AahTist on 12:00 AM - 12/18/18
So is everything pretty standard but you have boost 600 and Smoothing 5?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: NinjaWizard on 03:26 AM - 12/18/18
Hey RML thanks for all the work you put into these setups!

Though I seem to be having trouble with your latest one, I'm really struggling to land shots as the AA feels way too strong for me and pushes my aim off target.  I seem to have more luck with your older setup (which I think is now your alternative anti AA).  I can always go back to that setup but just wanted to check if there was anything I could do to the latest setup to help? as everyone here seems to be swearing by it.

Im on latest beta firmware, 12000dpi, 1000hz.
Thanks again.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Trshy on 09:43 AM - 12/18/18
Hey RML thanks for all the work you put into these setups!

Though I seem to be having trouble with your latest one, I'm really struggling to land shots as the AA feels way too strong for me and pushes my aim off target.  I seem to have more luck with your older setup (which I think is now your alternative anti AA).  I can always go back to that setup but just wanted to check if there was anything I could do to the latest setup to help? as everyone here seems to be swearing by it.

Im on latest beta firmware, 12000dpi, 1000hz.
Thanks again.

me too, however i changed my hip to smoothing 2 to prevent jitter, and ads to 1 smoothing and 500 boost. and it feels crisp to me, i tried RML's settings ( 600boost, 5 smoothing) but the aim assist feels sticky and throws me off target most of the time.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: puinsai on 10:53 AM - 12/18/18
Hey RML thanks for all the work you put into these setups!

Though I seem to be having trouble with your latest one, I'm really struggling to land shots as the AA feels way too strong for me and pushes my aim off target.  I seem to have more luck with your older setup (which I think is now your alternative anti AA).  I can always go back to that setup but just wanted to check if there was anything I could do to the latest setup to help? as everyone here seems to be swearing by it.

Im on latest beta firmware, 12000dpi, 1000hz.
Thanks again.
can you post the old one ? i erase it with the new one :-)

i think it was this :

1000hz
Sync Default
Hip - 8.5
ADS - 6.75
ADS delay - 400ms (Smooth Aim OFF)
Boost - 400
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 11:52 AM - 12/18/18
Hey RML thanks for all the work you put into these setups!

Though I seem to be having trouble with your latest one, I'm really struggling to land shots as the AA feels way too strong for me and pushes my aim off target.  I seem to have more luck with your older setup (which I think is now your alternative anti AA).  I can always go back to that setup but just wanted to check if there was anything I could do to the latest setup to help? as everyone here seems to be swearing by it.

Im on latest beta firmware, 12000dpi, 1000hz.
Thanks again.

me too, however i changed my hip to smoothing 2 to prevent jitter, and ads to 1 smoothing and 500 boost. and it feels crisp to me, i tried RML's settings ( 600boost, 5 smoothing) but the aim assist feels sticky and throws me off target most of the time.

Did you keep my ADS Sensitivity or turn it down?

This was meant as a common ground for Multi and Blackout. You can create a config for each, but this worked well enough for me. Just took a little practice, I don't mind sticky so long as I'm getting in and out of the hit box with ease. If I were to run pure Multi I would lower Smoothing to 3 on both. Pure Blackout I would run 5 and 300 Boost.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Darik on 01:14 PM - 12/18/18
What happened with configuration for multiplayer ? I donít see in the first post =/
There is only for blackout.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Darik on 01:36 PM - 12/18/18
What happened with configuration for multiplayer ? I donít see in the first post =/
There is only for blackout.
Ops
 this config turned out to be for multiplayer, just it has the wrong name ;)
Title: Re: BO4 My Advanced Setup (20181216)
Post by: NinjaWizard on 02:02 PM - 12/18/18
Hey RML thanks for all the work you put into these setups!

Though I seem to be having trouble with your latest one, I'm really struggling to land shots as the AA feels way too strong for me and pushes my aim off target.  I seem to have more luck with your older setup (which I think is now your alternative anti AA).  I can always go back to that setup but just wanted to check if there was anything I could do to the latest setup to help? as everyone here seems to be swearing by it.

Im on latest beta firmware, 12000dpi, 1000hz.
Thanks again.

me too, however i changed my hip to smoothing 2 to prevent jitter, and ads to 1 smoothing and 500 boost. and it feels crisp to me, i tried RML's settings ( 600boost, 5 smoothing) but the aim assist feels sticky and throws me off target most of the time.

Did you keep my ADS Sensitivity or turn it down?

This was meant as a common ground for Multi and Blackout. You can create a config for each, but this worked well enough for me. Just took a little practice, I don't mind sticky so long as I'm getting in and out of the hit box with ease. If I were to run pure Multi I would lower Smoothing to 3 on both. Pure Blackout I would run 5 and 300 Boost.

I kept your ADS sensitivity at fist as it felt ok to me until I go for a shot and the AA bubble kept pushing me away.  Then increased the sensitivity but didn't help much.  I will try changing the smoothing and the boost though, thanks.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 03:36 PM - 12/18/18
Added the following to the OP. Hopefully it will help answer alot of the questions.

THEORY BEHIND THIS SETUP:
- High DPI helps cut through AA (Aim Assist).
- 1000hz helps cut through AA.
- SYNC OFF helps cut through AA.
- Higher Sensitivity helps cut through AA.
- Boost helps cut through AA.
- Smoothing increases AA.



HOW TO APPLY THIS CONCEPT TO YOUR GAME:
- Use your mouses Max DPI setting.
- Activate Advanced settings in XIM Manager.
- Use 1000hz in XIM Manager and 1000 polling on your mouse. (if your mouse doesn't poll at 1000hz consistently and you're feeling Stutter, then run XIM manager at 500hz. This will make AA slightly stronger but fix the stutter. If you're unsure if it's your mouse's polling rate, then add Smoothing and see if it fixes the issue. You should add Smoothing in increments of 1 until stutter is gone. You want to keep Smoothing as low as possible as it will also make AA stronger).
- Change your Sync setting from DEFAULT to SYNC OFF, in manager.
- Adjust your Hip sensitivity in game until you feel comfortable. Adjust your ADS sensitivity the same, but maybe push it a little toward the fast side. Remember higher sens = less AA and raising your ADS sensitivity is the Purest way of eliminating AA. So push it but make sure it's controllable, I suggest you test it on bots in a private game to get the feel for how AA is effecting your aim.
- While testing your aim in a private match, Adjust boost in increments of 100 until AA feels manageable to you. You can then fine tune in smaller increments if you'd like, I'd suggest 25 minimum.

If needed, I suggest the following for applying Smoothing to your setup.
- MUTIPLAYER: 0-4
- BLACKOUT: 4-8

If needed, I suggest the following for applying Boost to your setup.
- BLACKOUT: 0-400 (Going above 400 in Blackout may make long range sniping difficult).
- MULTIPLAYER: 0-1000 (All depends on how much AA you like, if you go above 1000 though aiming gets to responsive IMO).
Title: Re: BO4 My Advanced Setup (20181216)
Post by: S13002931 on 04:49 AM - 12/19/18
Hi

Is it possible if you can make pubg  config ?

Thanks
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Darik on 09:49 AM - 12/19/18
Added the following to the OP. Hopefully it will help answer alot of the questions.

THEORY BEHIND THIS SETUP:
- High DPI helps cut through AA (Aim Assist).
- 1000hz helps cut through AA.
- SYNC OFF helps cut through AA.
- Higher Sensitivity helps cut through AA.
- Boost helps cut through AA.
- Smoothing increases AA.



HOW TO APPLY THIS CONCEPT TO YOUR GAME:
- Use your mouses Max DPI setting.
- Activate Advanced settings in XIM Manager.
- Use 1000hz in XIM Manager and 1000 polling on your mouse. (if your mouse doesn't poll at 1000hz consistently and you're feeling Stutter, then run XIM manager at 500hz. This will make AA slightly stronger but fix the stutter. If you're unsure if it's your mouse's polling rate, then add Smoothing and see if it fixes the issue. You should add Smoothing in increments of 1 until stutter is gone. You want to keep Smoothing as low as possible as it will also make AA stronger).
- Change your Sync setting from DEFAULT to SYNC OFF, in manager.
- Adjust your Hip sensitivity in game until you feel comfortable. Adjust your ADS sensitivity the same, but maybe push it a little toward the fast side. Remember higher sens = less AA and raising your ADS sensitivity is the Purest way of eliminating AA. So push it but make sure it's controllable, I suggest you test it on bots in a private game to get the feel for how AA is effecting your aim.
- While testing your aim in a private match, Adjust boost in increments of 100 until AA feels manageable to you. You can then fine tune in smaller increments if you'd like, I'd suggest 25 minimum.

If needed, I suggest the following for applying Smoothing to your setup.
- MUTIPLAYER: 0-4
- BLACKOUT: 4-8

If needed, I suggest the following for applying Boost to your setup.
- BLACKOUT: 0-400 (Going above 400 in Blackout may make long range sniping difficult).
- MULTIPLAYER: 0-1000 (All depends on how much AA you like, if you go above 1000 though aiming gets to responsive IMO).


Nice, thanks )
I have only one question, do you set any special settings for sniper class ? or maybe curve ?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Phoenix10 on 09:50 AM - 12/19/18
New settings are on the first page??
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 10:21 AM - 12/19/18
(https://static1.squarespace.com/static/54dcf6e0e4b06d0344874a08/t/5a5cfdd9c83025289ab5cde4/1516043743077/lead+a+horse+to+water.jpg)



Title: Re: BO4 My Advanced Setup (20181216)
Post by: N1TRO on 10:24 AM - 12/19/18
Added the following to the OP. Hopefully it will help answer alot of the questions.

THEORY BEHIND THIS SETUP:
- High DPI helps cut through AA (Aim Assist).
- 1000hz helps cut through AA.
- SYNC OFF helps cut through AA.
- Higher Sensitivity helps cut through AA.
- Boost helps cut through AA.
- Smoothing increases AA.



HOW TO APPLY THIS CONCEPT TO YOUR GAME:
- Use your mouses Max DPI setting.
- Activate Advanced settings in XIM Manager.
- Use 1000hz in XIM Manager and 1000 polling on your mouse. (if your mouse doesn't poll at 1000hz consistently and you're feeling Stutter, then run XIM manager at 500hz. This will make AA slightly stronger but fix the stutter. If you're unsure if it's your mouse's polling rate, then add Smoothing and see if it fixes the issue. You should add Smoothing in increments of 1 until stutter is gone. You want to keep Smoothing as low as possible as it will also make AA stronger).
- Change your Sync setting from DEFAULT to SYNC OFF, in manager.
- Adjust your Hip sensitivity in game until you feel comfortable. Adjust your ADS sensitivity the same, but maybe push it a little toward the fast side. Remember higher sens = less AA and raising your ADS sensitivity is the Purest way of eliminating AA. So push it but make sure it's controllable, I suggest you test it on bots in a private game to get the feel for how AA is effecting your aim.
- While testing your aim in a private match, Adjust boost in increments of 100 until AA feels manageable to you. You can then fine tune in smaller increments if you'd like, I'd suggest 25 minimum.

If needed, I suggest the following for applying Smoothing to your setup.
- MUTIPLAYER: 0-4
- BLACKOUT: 4-8

If needed, I suggest the following for applying Boost to your setup.
- BLACKOUT: 0-400 (Going above 400 in Blackout may make long range sniping difficult).
- MULTIPLAYER: 0-1000 (All depends on how much AA you like, if you go above 1000 though aiming gets to responsive IMO).


Can I convince you to try 3200dpi again? With the boost feature mouse movements feel so smooth and generally perfect but you don't have the hastle of obnoctious aim assist. I see why people used 12000dpi previously as there were less ways to deal with aim assist I think now however having a very high dpi is equivalent to using steady aim yes it works but it also has an impact on your mouse movements and there are now better solutions. Just my thoughts but I would suggest giving it a try.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 10:41 AM - 12/19/18

Can I convince you to try 3200dpi again? With the boost feature mouse movements feel so smooth and generally perfect but you don't have the hastle of obnoctious aim assist. I see why people used 12000dpi previously as there were less ways to deal with aim assist I think now however having a very high dpi is equivalent to using steady aim yes it works but it also has an impact on your mouse movements and there are now better solutions. Just my thoughts but I would suggest giving it a try.

This is actually a good point. Part of what I was trying to suggest to people was that there are quite a few tools at our disposal now to combat AA. So yeah, it is easier then ever to do.

My thing with DPI is it's probably the MOST subjective part of this setup and has the smallest impact on AA, when compared to everything else I've listed. However, this is also why I shared my story. I was totally against high DPI and felt it created too much jitter. I've learned to fine tune around it though for best AA performance with minimal boost. The key for me is "Do all you can First, then add Boost if it's not enough!" Boost should be avoided if at all possible. As should Steady Aim and curves.

Higher DPI helps me accomplish that goal, even if it is a small difference. My point is you can adapt as I have, but you don't have too. Especially if AA isn't that big of a deal for you. When I was running at 4000 dpi (which I did for a few years), I disliked 12000 dpi. It felt too jittery. Now that I've become accustomed to 12000 DPI I feel the complete opposite. When I use 4000 DPI it feels floaty and less responsive.

At the end of the day though, if you guys are set on using a certain DPI then do it. Use the other tools to make it work for you. 12000 dpi isn't a "Must" it's just an option that helps me minimize Boost just a little bit more. If you have an unsteady hand then it can be problematic at first. But if you learn to dial in your sensitivity, It doesn't feel much different then other DPI settings, just more responsive IMO. But it is harder to find your sensitivity sweet spot at higher DPI, that's true!
Title: Re: BO4 My Advanced Setup (20181216)
Post by: N1TRO on 02:40 PM - 12/19/18
Fair enough that's the best reasoning for using 12000dpi I've heard with actual reasons behind it. I also agree that higher dpi feels more responsive but I feel that responsiveness is in fact more of a hindrance as it asks a lot of your mouses sensor meaning minor issues like dust on the lense have a much larger impact.

The overall it really doesn't matter but I will always prefer 3k to 4k doing it feels by far the best for sniping accuracy wise and therefore I assume the overall accuracy is better to an extremely minimal extent.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 03:52 PM - 12/19/18
Lol.. fine, I'll try 3200 dpi when I get sometime. Like I said though, to me this is really user preference. I could probably get used to 3200 after a week or so and then 12000 would feel off. Why you gotta do me like that? ;)
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Shredly on 08:52 PM - 12/19/18
What can I do to decrease the lag/stutter when adsing?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: N1TRO on 09:05 PM - 12/19/18
Haha you know the itch you get that tells you things could be better haha us xim users will always be striving for perfection.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 09:14 PM - 12/19/18
Fair enough that's the best reasoning for using 12000dpi I've heard with actual reasons behind it. I also agree that higher dpi feels more responsive but I feel that responsiveness is in fact more of a hindrance as it asks a lot of your mouses sensor meaning minor issues like dust on the lense have a much larger impact.

The overall it really doesn't matter but I will always prefer 3k to 4k doing it feels by far the best for sniping accuracy wise and therefore I assume the overall accuracy is better to an extremely minimal extent.

Well, ok. I just set my mouse up for 12000, 3200 and 800 DPI. I rotated through all 3 over the last couple hours.

My conclusion.... I cant stand 3200 dpi lol. Im seriously not trying to be argumentative at all. I literally couldnt hit anything. You know what it felt like to me, it felt like i was playing on my old Xim4. It just felt off. The even stranger thing is I prefer 800 dpi over 3200. For some reason 800 feels more like 12000 then 3200 does. As a matter of fact, except for the AA being slightly stronger at 800 then 12000, they felt nearly identical. Both felt snappy, then id go to 3200 and it instantly felt super tight like i had Angle Snapping on or something wierd!

I can see why Xim4 users may like your settings though, they would probably feel familiar. To me it feels restrictive though. I dont really know how else to describe it.

Everyones got a different feel though. I would suggest that if you like using low dpi though to try 800. It feels alot better and even the AA felt weaker. Strange i know, but thats my conclusion.

Cheers!


What can I do to decrease the lag/stutter when adsing?

Try adding smoothing in increments of 1 until it smoothes out. If that doesnt work, try using default sync or lowering xim to 500hz.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: tsdbhg on 09:25 PM - 12/19/18

Well, ok. I just set my mouse up for 12000, 3200 and 800 DPI. I rotated through all 3 over the last couple hours.

My conclusion.... I cant stand 3200 dpi lol. Im seriously not trying to be argumentative at all. I literally couldnt hit anything. You know what it felt like to me, it felt like i was playing on my old Xim4. It just felt off. The even stranger thing is I prefer 800 dpi over 3200. For some reason 800 feels more like 12000 then 3200 does. As a matter of fact, except for the AA being slightly stronger at 800 then 12000, they felt nearly identical. Both felt snappy, then id go to 3200 and it instantly felt super tight like i had Angle Snapping on or something wierd!

I can see why Xim4 users may like your settings though, they would probably feel familiar. To me it feels restrictive though. I dont really know how else to describe it.

Everyones got a different feel though. I would suggest that if you like using low dpi though to try 800. It feels alot better and even the AA felt weaker. Strange i know, but thats my conclusion.

Cheers!

It could be a trait of the sensor in your mouse. Maybe try a different mouse with a different sensor to see if the same issue persists?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: B0wl_of_weed on 09:56 PM - 12/19/18
Rml what sens are you using at 800 dpi and smoothing etc?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: bastyen on 03:26 AM - 12/20/18
Lol.. fine, I'll try 3200 dpi when I get sometime. Like I said though, to me this is really user preference. I could probably get used to 3200 after a week or so and then 12000 would feel off. Why you gotta do me like that? ;)

Cool ! 👍😉
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 06:10 AM - 12/20/18

Well, ok. I just set my mouse up for 12000, 3200 and 800 DPI. I rotated through all 3 over the last couple hours.

My conclusion.... I cant stand 3200 dpi lol. Im seriously not trying to be argumentative at all. I literally couldnt hit anything. You know what it felt like to me, it felt like i was playing on my old Xim4. It just felt off. The even stranger thing is I prefer 800 dpi over 3200. For some reason 800 feels more like 12000 then 3200 does. As a matter of fact, except for the AA being slightly stronger at 800 then 12000, they felt nearly identical. Both felt snappy, then id go to 3200 and it instantly felt super tight like i had Angle Snapping on or something wierd!

I can see why Xim4 users may like your settings though, they would probably feel familiar. To me it feels restrictive though. I dont really know how else to describe it.

Everyones got a different feel though. I would suggest that if you like using low dpi though to try 800. It feels alot better and even the AA felt weaker. Strange i know, but thats my conclusion.

Cheers!

It could be a trait of the sensor in your mouse. Maybe try a different mouse with a different sensor to see if the same issue persists?

I have a feeling it has more to do with my mouse pad and maybe tuning the mouse then anything. I use a semi hard pad SS 9HD. I have a feeling those of you that like 3200 may be using a soft pad. I also DONOT like tuning my mouse to the pad. It feels better on default settings IMO. When I tune it, it feels less responsive and more robotic. Kind of like 3200 dpi did.

The biggest thing for me though was what a difference it made at 3200. I could probably get used to it, but I didn't expect it to feel that strange. Especially when 800 doesn't feel to bad. It's got to be the pad and possibly tuning, that's all that makes sense to me. But I really struggled and that was a little bit of an eye opener. I didn't think DPI could mess up my aim that badly! Maybe I'll have to try 3200 at Default Sync. I did leave that part out. I used 800 at default (because it stutters way too much with Sync off, unplayable!). Problem is, if I wanted to play at default SYNC I'd play with my XIM4. Default IMO can't come close to the responsiveness of Sync off. Again, maybe it's your mouse pad, but there's a distinct difference between the two. Default just feels sluggish and robotic, kind of restricted. When compared to Sync off. Unless you're playing at 800 DPI, then default feels more like 12000 dpi with Sync off.

Strange, I know!


Lol.. fine, I'll try 3200 dpi when I get sometime. Like I said though, to me this is really user preference. I could probably get used to 3200 after a week or so and then 12000 would feel off. Why you gotta do me like that? ;)

Cool ! 👍😉


No, Not Cool! Lol...


Rml what sens are you using at 800 dpi and smoothing etc?

I'll have to look later, I just took my sense and did the math.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Lzy on 09:19 AM - 12/20/18
i dont feel a difference between 3200 and 12000  ???
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 10:32 AM - 12/20/18
i dont feel a difference between 3200 and 12000  ???

Mouse and pad?

1000hz?

Sync?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: TheBestAkaliNA on 11:32 AM - 12/20/18
Hey RML, Iím glad you listened to my previous post about XuK and Ruhsky. I honestly think sync off and 12k is the golden combo for CoD. Unfortunately I only have mobile at the moment to use my Xim Manager and itís not letting me input your xim string, could you let me know which hip/ads/delay/boost youíre using on your current config?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 12:41 PM - 12/20/18
Hey RML, Iím glad you listened to my previous post about XuK and Ruhsky.

 ???

could you let me know which hip/ads/delay/boost youíre using on your current config?

Multiplayer
Hip - 58
ADS - 50, Boost 600
Delay - 400

Blackout
High Zoom .75
Hip - 58
ADS - 48, Boost 300
Delay - 400
Title: Re: BO4 My Advanced Setup (20181216)
Post by: redacted on 12:48 PM - 12/20/18
I feel an epic difference in AA handling between 12k and 3200. That being said, I'm finding myself playing with TA/AA turned off more often than not in Blackout. Multiplayer is a different story.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: HypeR on 12:57 PM - 12/20/18
Hey RML, Iím glad you listened to my previous post about XuK and Ruhsky.

 ???

could you let me know which hip/ads/delay/boost youíre using on your current config?

Multiplayer
Hip - 58
ADS - 50, Boost 600
Delay - 400

Blackout
High Zoom .75
Hip - 58
ADS - 48, Boost 300
Delay - 400


No other changes or rml? Smoothing and the other settings still the same?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: N1TRO on 05:12 PM - 12/20/18
Fair enough that's the best reasoning for using 12000dpi I've heard with actual reasons behind it. I also agree that higher dpi feels more responsive but I feel that responsiveness is in fact more of a hindrance as it asks a lot of your mouses sensor meaning minor issues like dust on the lense have a much larger impact.

The overall it really doesn't matter but I will always prefer 3k to 4k doing it feels by far the best for sniping accuracy wise and therefore I assume the overall accuracy is better to an extremely minimal extent.

Well, ok. I just set my mouse up for 12000, 3200 and 800 DPI. I rotated through all 3 over the last couple hours.

My conclusion.... I cant stand 3200 dpi lol. Im seriously not trying to be argumentative at all. I literally couldnt hit anything. You know what it felt like to me, it felt like i was playing on my old Xim4. It just felt off. The even stranger thing is I prefer 800 dpi over 3200. For some reason 800 feels more like 12000 then 3200 does. As a matter of fact, except for the AA being slightly stronger at 800 then 12000, they felt nearly identical. Both felt snappy, then id go to 3200 and it instantly felt super tight like i had Angle Snapping on or something wierd!

I can see why Xim4 users may like your settings though, they would probably feel familiar. To me it feels restrictive though. I dont really know how else to describe it.

Everyones got a different feel though. I would suggest that if you like using low dpi though to try 800. It feels alot better and even the AA felt weaker. Strange i know, but thats my conclusion.

Cheers!

Wow that's super strange man did not expect that result for you. Also I know your not trying to be argumentative lol we all have different settups and settings we prefer I am very surprised that you like 800dpi but hate 3200 though. Also I will add if you like 800dpi 1600 feels very similar just a whole lot smoother perhaps you may like it.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: N1TRO on 05:31 PM - 12/20/18
Replied before looking at the other post. I usually do use soft pads imo they are simply far far superior much better control and still fast enough movement if your mouse isn't a heavy lump of junk.

Talking about that I don't suppose you use the g502 a lot of people like it for the sensor and large amount of buttons? If so this maybe the reason for two things your liking of hard pads and therefore your love of 12000dpi. I used to have the g502 and my aim was good with it and I liked the buttons but the bulkiness of the shape and the overall weight ruined the mouse for me quick wrist flicks were an absolute choir and big swipes were cancer. I would recommend to anyone who plays for games to ditch it but I know that's not practical for some users who use the nav which is why I suspect you probably use a g502 BTW.

I have some quality of life suggestions that may help you a lot from my experience. The first is just a tip. If you like hard pads and hate soft pads stick to what you like but if you want a hybrid kind of pad that is just excellent quality the zowie gsr is amazing 48cm wide 40cm high smooth and fast with great control and easy flick stop time.

The second I'm is a must for your own sanity if you use the g502. Get yourself a set of hyperglides it makes the heavy @#$% lump of a mouse so much more nimble and less of a wrist killer. It also helps a lot while doing larger swipes. This may also reduce the need for hard pads as you will glide over any mouse pad with ease. Also I would also never recommend using the pad tuning software I agree that it makes movements feel less snappy and more comebersome plus it is a semi faulty feature anyway.

I will also add I don't feel any difference between 3200dpi and 12000dpi other than a tad more snappiness and less accuracy at 12000. The setups I've used are.

Steelseries qck heavy
G502, deathader chroma, ec1-a and g pro
Preferred 3200 on all of them but barely noticed a difference

Currently
Zowie gsr
Ec1-a, g pro and fk2

Fk2 is my main mouse and the 3200dpi didn't even factor into my decision making perhaps lower doing feels a bit @#$% on hard pads. I personally never got on with hard pads I felt way to inconsistant.

Hope you find this useful or at least interesting. I know od1n is also a big fan of 3200dpi maybe he would be good to ask as well.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 06:01 PM - 12/20/18
Hey RML, Iím glad you listened to my previous post about XuK and Ruhsky.

 ???

could you let me know which hip/ads/delay/boost youíre using on your current config?

Multiplayer
Hip - 58
ADS - 50, Boost 600
Delay - 400

Blackout
High Zoom .75
Hip - 58
ADS - 48, Boost 300
Delay - 400


No other changes or rml? Smoothing and the other settings still the same?

Smoothing
Blackout - 3 and 5
Multi - 3 and 3


Wow that's super strange man did not expect that result for you. Also I know your not trying to be argumentative lol we all have different settups and settings we prefer I am very surprised that you like 800dpi but hate 3200 though. Also I will add if you like 800dpi 1600 feels very similar just a whole lot smoother perhaps you may like it.

Me either.. I don't know about 1600. I've tried as low as 2000 before and didn't care for it. That's why I was surprised at how 800 felt.

Have you tried 800? I can't say I like it "alot" but it feels better then 3200. 12000 is still where it's at for me, until I pick up a hero...  :)



Title: Re: BO4 My Advanced Setup (20181216)
Post by: xthenothingx on 06:15 PM - 12/20/18
I get an error when trying to paste it, just updated my xim apex with the latest beta software, i just wanted to use it to check if u use any curves now at all and what the amount of smoothing you are currently using with sync off
If I had a nickel for every person that posts this. You need to update the manager. The new firmware doesn't work with the old manager.

So I also get an error when pasting and I updated to the Firmware 20180501 | Manager 20180528. Which from what I can tell is the latest of each.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 06:52 PM - 12/20/18
Hey N1TRO, thanks.

Have you read my little story in the OP by chance? I'm a high DPI guy man, I've been there with low dpi (I swore by 4000), soft pads, lighter mice (I have the G303 for god sakes). Would I like to use a lighter mouse, eh.. yeah, maybe. I really value the buttons though. At the end of the day, you can literally adapt to just about anything. But yeah, maybe the weight of the G502 helps keep 12000 dpi steady a little. However, I also  preferred it with the 303 and that thing moves like lightning.

I know 0d1ns style well, we're both Alpha testers. There aren't many people that know more about XIM then 0d1n, that's a fact! That being said, I can't hit a @#$% thing with his setup lol... It's like trying to play on PC but with Aim Assist. I can't play that way. I watch his videos and I swear I have no idea how he does it. My aim gets stuck in the mud with low dpi and sensitivity. I never could learn how to adapt to that play style. 

At the end of the day I had to find my own way. That stuff just doesn't work for me. Believe me I tried! Besides, I've always wanted to play fast. I wish I could play faster, the faster the better IMO. Is it harder to learn and adapt to? Of course! But I really don't feel like my setup is that fast. I've played with young bucks that absolutely destroy my turn speed and they turn Aim Assist off. Little bastard doing 360 quick scopes and getting head shots, with Aim Assist off and higher sensitivity then me! Drives me absolutely crazy.

I have no idea how these guys try to play on console like they do on PC. It's just not Apples to Apples.


I get an error when trying to paste it, just updated my xim apex with the latest beta software, i just wanted to use it to check if u use any curves now at all and what the amount of smoothing you are currently using with sync off
If I had a nickel for every person that posts this. You need to update the manager. The new firmware doesn't work with the old manager.

So I also get an error when pasting and I updated to the Firmware 20180501 | Manager 20180528. Which from what I can tell is the latest of each.

There's a link in the OP guys. https://community.xim.tech/index.php?topic=73173.0

Title: Re: BO4 My Advanced Setup (20181216)
Post by: N1TRO on 06:54 PM - 12/20/18


Me either.. I don't know about 1600. I've tried as low as 2000 before and didn't care for it. That's why I was surprised at how 800 felt.

Have you tried 800? I can't say I like it "alot" but it feels better then 3200. 12000 is still where it's at for me, until I pick up a hero...  :)
[/quote]

My thoughts on 800dpi are actually quite ironic considering your thoughts on 3200dpi. I feel 800dpi feels like the old xim4 experience. Fat blobby aim assist that feels unclean for lack of a better word. I also hate he mouse feel, it feels jagged and somewhat floaty in comparison to 2k dpi plus. I cannot snipe for @#$% on 800dpi it feels way to sloppy and inaccurate. I would easily say 3-4kdpi is my favourite doing range +4kdpi is all good as it feels basically identical just a tad more inaccurate the higher the dpi resolution goes and anything under 1600 dpi is total aids. It's usable but offers a much worse experience imo.

I wish you could @ people in this forum It'd be interesting to see users like antithesis and od1n way in on this subject.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: N1TRO on 06:58 PM - 12/20/18
Thanks I'll take a look and fair enough man I am on the opposite spectrum I have very similar settups to od1n but I agree you cannot play on him as if it is pc it just doesn't work.ni guess you just have to find what works for you. I would still heavily advise purchasing some hyperglides for the g502 I can imagine only positives. I use them on my fk2 a 82g mouse the g502 is around 125g without weights and anyone who adds weights is literally insane haha.

Edit:

Forgot to mention have you modified the g502 cable? I had to do it on the g pro it was way to stiff for a light mouse and was affecting my aim. This may be less of an issue with a heavier mouse but I'd still recommend it. No need to buy Paracord or anything just a bit of time and effort carefully unraveling the cables braid. Underneath is a soft rubber cable anyway similar to the zowie mice cable. I'd post a photo but my phones busted I'm currently using my tablet for smaller responses so I don't have to boot my pc.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: N1TRO on 07:10 PM - 12/20/18
Owww man this is some deja vu but I hate you rml after reading that op post on dpi I really want to try 12000dpi again :'(:'(:'(.
I agree completely with your opinion on 1000hz BTW it is technically less perfect in precision but the feeling in game is such a massive improvement in terms of responsiveness and clean flicks. This is the main thing that's got me wanting to test 12000dpi again. Funny how things work out.

PS what happened to headhunter anyways
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 07:17 PM - 12/20/18
Thanks I'll take a look and fair enough man I am on the opposite spectrum I have very similar settups to od1n but I agree you cannot play on him as if it is pc it just doesn't work.ni guess you just have to find what works for you. I would still heavily advise purchasing some hyperglides for the g502 I can imagine only positives. I use them on my fk2 a 82g mouse the g502 is around 125g without weights and anyone who adds weights is literally insane haha.

Edit:

Forgot to mention have you modified the g502 cable? I had to do it on the g pro it was way to stiff for a light mouse and was affecting my aim. This may be less of an issue with a heavier mouse but I'd still recommend it. No need to buy Paracord or anything just a bit of time and effort carefully unraveling the cables braid. Underneath is a soft rubber cable anyway similar to the zowie mice cable. I'd post a photo but my phones busted I'm currently using my tablet for smaller responses so I don't have to boot my pc.

Sorry, forgot to mention I actually do use the hyper glides. Haven't really had an issue with the cable, but that's an interesting take. Also the 9HD isn't necessarily a "hard pad" IMO. It's a hard plastic, but not the kind of pad that eats mice feet alive! My feet show very little wear after a few years of use.

  https://www.amazon.com/SteelSeries-Large-Professional-Gaming-Mouse/dp/B002J9G5AO


Owww man this is some deja vu but I hate you rml after reading that op post on dpi I really want to try 12000dpi again :'(:'(:'(.
I agree completely with your opinion on 1000hz BTW it is technically less perfect in precision but the feeling in game is such a massive improvement in terms of responsiveness and clean flicks. This is the main thing that's got me wanting to test 12000dpi again. Funny how things work out.

PS what happened to headhunter anyways

He was wrapped up in school, not sure what he's been up to lately. Maybe got a real job and doesn't have time for games anymore, IDK, Still, he's the man and plastered all over XIM advertisement. His COD video's have sold alot of units, I'm sure. He's also the one that got me to buy the G303. God that thing is tiny, I can't use it ahaha! @#$%!

By the way, his setup would be pretty vanilla. I guarantee you it would look alot like mine, just remove boost and lower sens a little and I think you'd be close to HH.

Title: Re: BO4 My Advanced Setup (20181216)
Post by: N1TRO on 07:45 PM - 12/20/18
Ahh fair enough don't know how people use plastic pads I can't track for @#$% on them haha.

Also just did some messing around and felt like you couldn't hit @#$% with identical settings 3200 was tones better. I realised the real reason I don't like 12000dpi though it's not the inacuracy as it's basically identical. It's the effect on aim assist. It does make the aim assist less apparent but it does it in a non uniform manner meaning that basically the aim assist you get feels very inconsistant in strength slowdown and even Bubble size.
I understand the reason for using it previously as it lowered the aim assist strength and was one of the only ways to do so but I definitely will not be using it any more with boost you can easily enter the aim assist at 3200dpi 1000hz and you get a very consistent aim assist feel that once you have adapted to improves your consistency a lot.

My take would be if you give 3200dpi a week of use with your current settings and adapt to the feeling of a proper aim assist bubble it may improve your aim but I may also be wrong and the inconsistant aim assist may be what you like about it and you very well may be better with it but for me the aim assist doesn't feel strong or weak on 12000dpi is just feels random.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: N1TRO on 07:56 PM - 12/20/18
Also I will add this has given me 3360 sensor envy again :-( the fk2 is so much better to aim with but the 3360 sensor is just so smooth and crisp guess I'm going to be wasting money soon lol
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 08:07 PM - 12/20/18
Sounds like you need to tone your sens down with 12000 dpi. if AA feels inconsistent it's because of inconsistent movement. The Jitters will do that lol... They'll cut through AA. I mean just look at OBsIV's algorithm AA curves, they're like perfect jitter! When I first started using 12000 dpi I was all over the place as well. Now, steady as a rock!  ;)

I adapted by using lower sens until I got used to how responsive it was.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: N1TRO on 08:14 PM - 12/20/18
Ahh there we go so I can confidently say for overwatch 3200dpi is superior as the game has a dogshit turn speed cap you need a reasonably high sense to be mobile enough to compete. Out of interest what cm/360 do you use if you know?

I now use 24.74cm/360 for overwatch


PS I don't suppose you have any gameplay footage I'd love to see something from you
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Lzy on 07:45 AM - 12/21/18
i dont feel a difference between 3200 and 12000  ???

Mouse and pad?

1000hz?

Sync?


QcK+

Logitech G Pro and G502

1000hz

Sync Default and OFF sometimes
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Roronoa on 11:16 AM - 12/21/18
hello RML, I got lost in the conversation! so in the end what is your config currently? I play 12k dpi, sync off 600 boost 3 smoothing, do you advise me to use the curve obsiv?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: InZaneHD on 12:03 PM - 12/21/18
Inventory config question: is there a way to use the same button as both activate and deactivate?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 12:15 PM - 12/21/18

QcK+

Logitech G Pro and G502

1000hz

Sync Default and OFF sometimes

Thanks Lzy, is the Qck+ a soft pad?


hello RML, I got lost in the conversation! so in the end what is your config currently? I play 12k dpi, sync off 600 boost 3 smoothing, do you advise me to use the curve obsiv?

I advise NO curves or Boost unless absolutely necessary. If AA is too strong though (as it is for me). Then try raising your sens as high as you can comfortably control. Then raise Boost by increments of 100 until AA feels manageable. If 600 isn't enough then maybe think about a curve instead. It's really user preference, kind of like N1TRO and I's conversation. Everyone is different man. But that's what I would do.

Ahh there we go so I can confidently say for overwatch 3200dpi is superior as the game has a dogshit turn speed cap you need a reasonably high sense to be mobile enough to compete.

You can say it, but that's still just an opinion.  ;)

Out of interest what cm/360 do you use if you know?

I now use 24.74cm/360 for overwatch

This is another PC trait and is something that every PC gamer Definitely should do. However, on console, with Aim Assist [ON], there's really no need for this. I used to do stuff like this several years ago. TBH I have such a good feel for what I like with XIM I don't even bother anymore, so I couldn't tell you. I mean if you're new to XIM, Mouse  & KB then this is a good starting point. But if you stop there you're not playing to your full potential IMO. This isn't PC, you have AA to help you not over aim. You really don't need such strict guidelines for aiming on consoles. They practically aim for you. IMO your goal should be to push speed to the limit ALWAYS! These are the biggest advantages we have over controller, speed and precision! If you're just going for precision your not pushing yourself to get better. You're in your comfort zone, and honestly that's fine for a lot of people. For me, being comfortable makes me uncomfortable! I hate complacency! Lol.. I'm a firm believer in constant progression. Will there be setbacks, of course! But you don't know if you don't try.


PS I don't suppose you have any gameplay footage I'd love to see something from you

I used to do this, but stopped back around the BF4/BO3 days. I'm sure I still have a few old clips or videos around I'll post a few. I don't like pushing setups based on video's or KD ratio's I think that's a very small part of the story. For example, if you looked up my KD and SPM, I'm typically around a 2.0 - 2.5 kd and 350 SPM player. However, this doesn't take into account several things. 1.) All the hours I spend dicking around testing things. 2.) I don't give a @#$% about statistics. I never quit games and I often get distracted while playing leading to a boot or negative KD. I'm on the phone, talking to my wife, petting the dog, IDC. 3.) I'm a reckless player, Push, Push, Push.. that's the only Gaming Style I know. @#$% even in PUBG people here would get mad at me for constantly pushing. My reply... don't play with me then, I'm not sorry! IDC, I have one speed. Point is, I'm not concerned about KD or SPM, it's not my thing. All I care about is that I create the most enjoyable experience for me when I do play. I also believe it is more important that others share their thoughts, clips, whatever, than I. IMO, we can all post some good and bad @#$% about our performance.

But if you're that interested in it here's a quick clip of what movement and Tracking look like for me currently in BO4 using this setup.
https://xboxclips.com/RockyMtn%20Legend/bb3bb620-4c7c-4f31-88e7-22acb2eab9ab


Here's some old @#$% to show you I can wreck with the best of them.
COD - I could paste these for pretty much ever!
https://xboxclips.com/RockyMtn%20Legend/befcaa1d-3d83-4953-9d82-43efaf2f234e
https://xboxclips.com/RockyMtn%20Legend/bfc97ca1-b874-486a-ab2c-d62e493a1205
https://xboxclips.com/RockyMtn%20Legend/027d6628-818e-4035-8cf6-52d25e841422
https://xboxclips.com/RockyMtn%20Legend/246c5292-5d33-43f1-865b-e609cef93d5e
https://xboxclips.com/RockyMtn%20Legend/fb2821b9-f4ad-406e-9d69-27f3f3dcb552

BF
https://xboxclips.com/RockyMtn%20Legend/80a705ae-5a53-42d2-a5aa-1972b88a724c
https://www.youtube.com/watch?v=6ZPW3crtRnA

Even Gears! (completely irrelevant, I know)
https://www.youtube.com/watch?v=vZ0HNHedCPg

Title: Re: BO4 My Advanced Setup (20181216)
Post by: Lzy on 12:42 PM - 12/21/18

QcK+

Logitech G Pro and G502

1000hz

Sync Default and OFF sometimes

Thanks Lzy, is the Qck+ a soft pad?



Yes it's a soft pad
Title: Re: BO4 My Advanced Setup (20181216)
Post by: N1TRO on 01:04 PM - 12/21/18
@#$% rml thats a huge post thanks for the effort man. i assume based on your comments their about maximising speed plus accuracy you use a very high sense then. Also i have come around to this way of thinking i used to use my pc setting of 33.63cm/360 but ye you just put yourself at a disadvantage a great example is a player called Lime on overwatch he uses an insanely high sens and is the best widow ive ever seen.

thanks for the links ill definately give them a look through :)
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Darik on 12:46 AM - 12/22/18
Who can share config or settings for sniper :(
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Phoenix10 on 02:58 AM - 12/22/18
I cant feel right the new settings for blackout?
Am also nav player
Any idea?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: InZaneHD on 07:31 AM - 12/22/18
Who can share config or settings for sniper :(

I use the config in OP and i snipe alot. Go to settings and set big zoom sens to 75%, helps alot and you dont have to worry about multiple configs
Title: Re: BO4 My Advanced Setup (20181216)
Post by: jeffpaw96 on 10:20 AM - 12/22/18
Who can share config or settings for sniper :(

Assuming you are talking about multiplayer the ADS page should have NO boost or smoothing. There is no aim assist with snipers in bo4 so linearity works better
Title: Re: BO4 My Advanced Setup (20181216)
Post by: mharkush on 09:54 PM - 12/22/18
hi rml when i copy your anti aim assist curve  to my xim manager it says error. why?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Darik on 10:16 AM - 12/23/18
Who can share config or settings for sniper :(

Assuming you are talking about multiplayer the ADS page should have NO boost or smoothing. There is no aim assist with snipers in bo4 so linearity works better
Thanks :)
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Adriancorona1007 on 01:01 PM - 12/23/18
New to the xim community and in need of help unfortunately. I am unable to copy the configuration and the curves. I have the newest firmware on both the xim apex and app manager. When copying I select all of the text then select copy go to the app and paste. It'll give me an error. However the name of load out appears named blackouts. Everything else is blank, the aim section is completely gone. I've tried doing this on two separate devices and the same thing occurred. Now with copying the curve nothing pops up, just an error. I'm not sure what I'm doing wrong :/ any help would be greatly appreciated!
Title: Re: BO4 My Advanced Setup (20181216)
Post by: ProxySoldier on 02:27 PM - 12/23/18
This happened to me too.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: obi-wan_legend on 02:30 PM - 12/23/18
The link to firmware is on 1st page its the latest beta build
Title: Re: BO4 My Advanced Setup (20181216)
Post by: grman on 03:28 PM - 12/23/18
This setup feels great with assault and LMG, but it feels sluggish when aimed in when I use SMGs or pistols.  It seems like raising my sensitivity isnít cutting it even when Iím up in the 200s.  Odd.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: jeffpaw96 on 05:07 PM - 12/23/18
New to the xim community and in need of help unfortunately. I am unable to copy the configuration and the curves. I have the newest firmware on both the xim apex and app manager. When copying I select all of the text then select copy go to the app and paste. It'll give me an error. However the name of load out appears named blackouts. Everything else is blank, the aim section is completely gone. I've tried doing this on two separate devices and the same thing occurred. Now with copying the curve nothing pops up, just an error. I'm not sure what I'm doing wrong :/ any help would be greatly appreciated!

Did you sideload the update on iOS or android? The version on google play/app store is not the latest version.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 10:27 AM - 12/24/18
This setup feels great with assault and LMG, but it feels sluggish when aimed in when I use SMGs or pistols.  It seems like raising my sensitivity isnít cutting it even when Iím up in the 200s.  Odd.

Add more Boost for SMG's. I've used up to 1000 in the past with the Saug and Spitfire. Also try adjusting your X/Y ratio to 1.25 for SMG's.

If I'm running pure SMG's in multiplayer my settings look like this.

12000 DPI
1000hz
Sync Off
Hip - 58, Smoothing 3
ADS - 50, ADS delay 400ms, Smoothing 3, Boost 600
Title: Re: BO4 My Advanced Setup (20181216)
Post by: grman on 01:57 PM - 12/24/18
Thank you for the reply an d the help!  I will def give it a shot.  I got used to the settings but still feel a little all over with the smgs, your insights will def help.  Maybe lowering the x/y is what Iím looking for as left/right movements are what feel sluggish but I guess the boost could compensate for that.

Itís funny, I have the same dpi/hz setup with the same mouse and my sensitivity is way higher, 75/175.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 02:05 PM - 12/24/18
Thank you for the reply an d the help!  I will def give it a shot.  I got used to the settings but still feel a little all over with the smgs, your insights will def help.  Maybe lowering the x/y is what Iím looking for as left/right movements are what feel sluggish but I guess the boost could compensate for that.

Itís funny, I have the same dpi/hz setup with the same mouse and my sensitivity is way higher, 75/175.

Are you using a cloth mouse pad?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: InZaneHD on 02:49 PM - 12/24/18
Just wondering. Why 1.25yx on smg? Or any other weapons for that sake. Wouldnt it destroy the muscle memory?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: ceebs on 04:54 PM - 12/24/18
Your arm swipes very quickly on the horizontal whilst your wrist moves much more slowly on the vertical. Increased Y/X compensates.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 05:00 PM - 12/24/18
Your arm swipes very quickly on the horizontal whilst your wrist moves much more slowly on the vertical. Increased Y/X compensates.

This and SMGs have quite a bit more recoil then other weapons.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Bushido-_-24 on 05:56 PM - 12/24/18
Per requests, here's my current setup for BO4.

I personally like utilizing Aim Assist (AA) as I believe it gives me an advantage. Why? Because when utilizing AA I can out maneuver and out aim "most" of my opponents that can't move and turn as fast as I can and maintain a high degree of accuracy. I can do this because I can play at higher sensitivity's then a controller player and still be accurate with my shots thanks to the slow down effects of AA. With a little practice XIM can easily put you into the "Elite" class of controller players. The biggest problem with AA is it can be a little over powering for a device as precise as a mouse. For more on that, please see the link in my signature titled "Anti Aim Assist curve set for any FPS game".

PLEASE NOTE: I'm currently getting away from any AA curves with APEX. APEX polling at 1000hz combined with SYNC OFF, 12000 DPI and some added boost cuts through AA nicely.

If you're newer to XIM and you don't know me and you're wondering if this setup may apply to you. Here's a little background on me and my setup.

"I use 12000 dpi because it helps over come AA a little. I use SYNC OFF, because it helps over come AA a little, I use 1000hz. because it helps over come AA a little. Then I use Boost to do the rest. The objective would be to use as little Boost as possible because its the only one of these that will have a negative impact on Linear movement. I've taken all of these things into account, and came up with the settings I've shared. The goal being to make Aim Assist feel more manageable without degrading linear and micro movements to noticeably.

Morale of the story... The more you lower DPI, Polling, SYNC settings and Sensitivity, the more you have to compensate with curves and boost if Aim Assist is too strong for you. I understand wanting to use lower DPI, I honestly Used to be "That Guy!" Od1n and myself were probably the biggest "known members" here that have spoken this way. I swore on 4000 dpi! That was my thing with my Destiny Setup. 4000 DPI, that's because I grew up with it. 12000 dpi felt jittery to me.

Then APEX came along. As an Alpha tester I was committed to test and trial running at 1000hz. At first this felt pretty Jittery to me and I had some real concerns about the quality of performance. But after about a week of playing at 1000hz. and after I realized how much better Aim Assist felt to me while playing at 1000hz. I was completely sold that this is the future of XIM! It takes performance up a few notches, it's more responsive, it cuts through AA better!

Then HE4DHUNTER convinced me to do something I swore I NEVER would do, convert to 12000 DPI. Again, at first this felt jittery to me as much or more so then 1000hz. But I learned to dial in my sensitivity with these new settings and my G502. I learned to steady my hand a little. Now, I won't stray from 12000 DPI either.

(If you don't know who HE4DHUNTER is, watch any of the Admin videos advertising a XIM product since EDGE, if it's COD, then it's HH behind the mouse. The guy is the best XIM COD player on the planet, period!)

My point is. I do these things for a reason. It made sense to me to alter my style and switch to 12000 dpi because I liked how it made AA feel for me when compared to lower DPI settings.

Aim Assist has always been my one and only Nemesis ever since I bought my first XIM and it seems to be just getting stronger with most games. So what you see in my setup is quite literally an evolution of my gaming style over the last 5 years (maybe more)! But it was a necessity for me personally. In order to make AA work for me, to my expectations and still keep linear movement as crisp and clean as possible. This setup is what I had to do.

That being said, everyone is different. This is the story behind my setup. If you asked "what could I do to match your settings?" I don't know how to fully explain that to you without sharing my journey. So sorry for the long winded, ba,blah,ba blah. But that's my answer.

Cheers!"   - RML



THEORY BEHIND THIS SETUP:
- High DPI helps cut through AA (Aim Assist).
- 1000hz helps cut through AA.
- SYNC OFF helps cut through AA.
- Higher Sensitivity helps cut through AA.
- Boost helps cut through AA.
- Smoothing increases AA.



HOW TO APPLY THIS CONCEPT TO YOUR GAME:
- Use your mouses Max DPI setting.
- Activate Advanced settings in XIM Manager.
- Use 1000hz in XIM Manager and 1000 polling on your mouse. (if your mouse doesn't poll at 1000hz consistently and you're feeling Stutter, then run XIM manager at 500hz. This will make AA slightly stronger but fix the stutter. If you're unsure if it's your mouse's polling rate, then add Smoothing and see if it fixes the issue. You should add Smoothing in increments of 1 until stutter is gone. You want to keep Smoothing as low as possible as it will also make AA stronger).
- Change your Sync setting from DEFAULT to SYNC OFF, in manager.
- Adjust your Hip sensitivity in game until you feel comfortable. Adjust your ADS sensitivity the same, but maybe push it a little toward the fast side. Remember higher sens = less AA and raising your ADS sensitivity is the Purest way of eliminating AA. So push it but make sure it's controllable, I suggest you test it on bots in a private game to get the feel for how AA is effecting your aim.
- While testing your aim in a private match, Adjust boost in increments of 100 until AA feels manageable to you. You can then fine tune in smaller increments if you'd like, I'd suggest 25 minimum.

If needed, I suggest the following for applying Smoothing to your setup.
- MUTIPLAYER: 0-4
- BLACKOUT: 4-8

If needed, I suggest the following for applying Boost to your setup.
- BLACKOUT: 0-400 (Going above 400 in Blackout may make long range sniping difficult).
- MULTIPLAYER: 0-1000 (All depends on how much AA you like, if you go above 1000 though aiming gets to responsive IMO).


Got it? Good! On to the setup...

Here's my Full Setup
Beta Firmware/Manager, Link - https://community.xim.tech/index.php?topic=73173.0
In game sensitivity should be maxed at Insane 14
Ads 1x
High Zoom .75x

Aim Assist in game should be [ON]
12000 DPI - http://www.csgosetup.com/dpi-calculator/
G502 Polling is set to 1000
BO4 ST
XIM APEX Polling - 1000
Sync Off


FULL CONFIG (Sync Off) - I'm a NAV user, so you'll have to assign buttons to your liking. This "Full Config Code" is for APEX ONLY!
Code: [Select]
   >>> XIM APEX [BLACKOUT ] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<< 


If the settings above don't work for you then you can try an Anti Aim Assist curve. If you're going to use any of these curves I suggest you first remove any Boost from your settings. Here's a full configuration code. This is an Alpha Stencil ST and not meant for use with ANY particular game. This Configs only purpose is to act as a storage area for AAA curves. Every sub within this config has a AAA curve in it. Every AAA curve I currently recommend is within this config. Just copy/paste the curve from this config into your own.

Anti Aim Assist Curves Storage Config.
Code: [Select]
  >>> XIM APEX [Anti Aim Assist Curves] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

Here's my G502 button mapping (cause several have asked).
(https://i.imgur.com/7nofMHZ.jpg)


CHEERS!

Hey bro why is giving me an error when I try to paste the curve
Title: Re: BO4 My Advanced Setup (20181216)
Post by: grman on 06:53 PM - 12/24/18
Make sure you are using the latest beta firmware and manager, that is usually the culprit.  Plus, the curves config is an entire config with different curves stored in it so you have to copy the curve out of the config after you created a new config and pasted this config in.

I use the Corsair aluminum-core hard double sided mouse pad.  Really like it by the way.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: mharkush on 03:19 AM - 12/25/18
Per requests, here's my current setup for BO4.

I personally like utilizing Aim Assist (AA) as I believe it gives me an advantage. Why? Because when utilizing AA I can out maneuver and out aim "most" of my opponents that can't move and turn as fast as I can and maintain a high degree of accuracy. I can do this because I can play at higher sensitivity's then a controller player and still be accurate with my shots thanks to the slow down effects of AA. With a little practice XIM can easily put you into the "Elite" class of controller players. The biggest problem with AA is it can be a little over powering for a device as precise as a mouse. For more on that, please see the link in my signature titled "Anti Aim Assist curve set for any FPS game".

PLEASE NOTE: I'm currently getting away from any AA curves with APEX. APEX polling at 1000hz combined with SYNC OFF, 12000 DPI and some added boost cuts through AA nicely.

If you're newer to XIM and you don't know me and you're wondering if this setup may apply to you. Here's a little background on me and my setup.

"I use 12000 dpi because it helps over come AA a little. I use SYNC OFF, because it helps over come AA a little, I use 1000hz. because it helps over come AA a little. Then I use Boost to do the rest. The objective would be to use as little Boost as possible because its the only one of these that will have a negative impact on Linear movement. I've taken all of these things into account, and came up with the settings I've shared. The goal being to make Aim Assist feel more manageable without degrading linear and micro movements to noticeably.

Morale of the story... The more you lower DPI, Polling, SYNC settings and Sensitivity, the more you have to compensate with curves and boost if Aim Assist is too strong for you. I understand wanting to use lower DPI, I honestly Used to be "That Guy!" Od1n and myself were probably the biggest "known members" here that have spoken this way. I swore on 4000 dpi! That was my thing with my Destiny Setup. 4000 DPI, that's because I grew up with it. 12000 dpi felt jittery to me.

Then APEX came along. As an Alpha tester I was committed to test and trial running at 1000hz. At first this felt pretty Jittery to me and I had some real concerns about the quality of performance. But after about a week of playing at 1000hz. and after I realized how much better Aim Assist felt to me while playing at 1000hz. I was completely sold that this is the future of XIM! It takes performance up a few notches, it's more responsive, it cuts through AA better!

Then HE4DHUNTER convinced me to do something I swore I NEVER would do, convert to 12000 DPI. Again, at first this felt jittery to me as much or more so then 1000hz. But I learned to dial in my sensitivity with these new settings and my G502. I learned to steady my hand a little. Now, I won't stray from 12000 DPI either.

(If you don't know who HE4DHUNTER is, watch any of the Admin videos advertising a XIM product since EDGE, if it's COD, then it's HH behind the mouse. The guy is the best XIM COD player on the planet, period!)

My point is. I do these things for a reason. It made sense to me to alter my style and switch to 12000 dpi because I liked how it made AA feel for me when compared to lower DPI settings.

Aim Assist has always been my one and only Nemesis ever since I bought my first XIM and it seems to be just getting stronger with most games. So what you see in my setup is quite literally an evolution of my gaming style over the last 5 years (maybe more)! But it was a necessity for me personally. In order to make AA work for me, to my expectations and still keep linear movement as crisp and clean as possible. This setup is what I had to do.

That being said, everyone is different. This is the story behind my setup. If you asked "what could I do to match your settings?" I don't know how to fully explain that to you without sharing my journey. So sorry for the long winded, ba,blah,ba blah. But that's my answer.

Cheers!"   - RML



THEORY BEHIND THIS SETUP:
- High DPI helps cut through AA (Aim Assist).
- 1000hz helps cut through AA.
- SYNC OFF helps cut through AA.
- Higher Sensitivity helps cut through AA.
- Boost helps cut through AA.
- Smoothing increases AA.



HOW TO APPLY THIS CONCEPT TO YOUR GAME:
- Use your mouses Max DPI setting.
- Activate Advanced settings in XIM Manager.
- Use 1000hz in XIM Manager and 1000 polling on your mouse. (if your mouse doesn't poll at 1000hz consistently and you're feeling Stutter, then run XIM manager at 500hz. This will make AA slightly stronger but fix the stutter. If you're unsure if it's your mouse's polling rate, then add Smoothing and see if it fixes the issue. You should add Smoothing in increments of 1 until stutter is gone. You want to keep Smoothing as low as possible as it will also make AA stronger).
- Change your Sync setting from DEFAULT to SYNC OFF, in manager.
- Adjust your Hip sensitivity in game until you feel comfortable. Adjust your ADS sensitivity the same, but maybe push it a little toward the fast side. Remember higher sens = less AA and raising your ADS sensitivity is the Purest way of eliminating AA. So push it but make sure it's controllable, I suggest you test it on bots in a private game to get the feel for how AA is effecting your aim.
- While testing your aim in a private match, Adjust boost in increments of 100 until AA feels manageable to you. You can then fine tune in smaller increments if you'd like, I'd suggest 25 minimum.

If needed, I suggest the following for applying Smoothing to your setup.
- MUTIPLAYER: 0-4
- BLACKOUT: 4-8

If needed, I suggest the following for applying Boost to your setup.
- BLACKOUT: 0-400 (Going above 400 in Blackout may make long range sniping difficult).
- MULTIPLAYER: 0-1000 (All depends on how much AA you like, if you go above 1000 though aiming gets to responsive IMO).


Got it? Good! On to the setup...

Here's my Full Setup
Beta Firmware/Manager, Link - https://community.xim.tech/index.php?topic=73173.0
In game sensitivity should be maxed at Insane 14
Ads 1x
High Zoom .75x

Aim Assist in game should be [ON]
12000 DPI - http://www.csgosetup.com/dpi-calculator/
G502 Polling is set to 1000
BO4 ST
XIM APEX Polling - 1000
Sync Off


FULL CONFIG (Sync Off) - I'm a NAV user, so you'll have to assign buttons to your liking. This "Full Config Code" is for APEX ONLY!
Code: [Select]
   >>> XIM APEX [BLACKOUT ] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<< 


If the settings above don't work for you then you can try an Anti Aim Assist curve. If you're going to use any of these curves I suggest you first remove any Boost from your settings. Here's a full configuration code. This is an Alpha Stencil ST and not meant for use with ANY particular game. This Configs only purpose is to act as a storage area for AAA curves. Every sub within this config has a AAA curve in it. Every AAA curve I currently recommend is within this config. Just copy/paste the curve from this config into your own.

Anti Aim Assist Curves Storage Config.
Code: [Select]
  >>> XIM APEX [Anti Aim Assist Curves] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

Here's my G502 button mapping (cause several have asked).
(https://i.imgur.com/7nofMHZ.jpg)


CHEERS!




RML when i try copy and paste your entire config to my xim manager it say error? can you help me pls..
Title: Re: BO4 My Advanced Setup (20181216)
Post by: mharkush on 06:01 AM - 12/25/18
Per requests, here's my current setup for BO4.

I personally like utilizing Aim Assist (AA) as I believe it gives me an advantage. Why? Because when utilizing AA I can out maneuver and out aim "most" of my opponents that can't move and turn as fast as I can and maintain a high degree of accuracy. I can do this because I can play at higher sensitivity's then a controller player and still be accurate with my shots thanks to the slow down effects of AA. With a little practice XIM can easily put you into the "Elite" class of controller players. The biggest problem with AA is it can be a little over powering for a device as precise as a mouse. For more on that, please see the link in my signature titled "Anti Aim Assist curve set for any FPS game".

PLEASE NOTE: I'm currently getting away from any AA curves with APEX. APEX polling at 1000hz combined with SYNC OFF, 12000 DPI and some added boost cuts through AA nicely.

If you're newer to XIM and you don't know me and you're wondering if this setup may apply to you. Here's a little background on me and my setup.

"I use 12000 dpi because it helps over come AA a little. I use SYNC OFF, because it helps over come AA a little, I use 1000hz. because it helps over come AA a little. Then I use Boost to do the rest. The objective would be to use as little Boost as possible because its the only one of these that will have a negative impact on Linear movement. I've taken all of these things into account, and came up with the settings I've shared. The goal being to make Aim Assist feel more manageable without degrading linear and micro movements to noticeably.

Morale of the story... The more you lower DPI, Polling, SYNC settings and Sensitivity, the more you have to compensate with curves and boost if Aim Assist is too strong for you. I understand wanting to use lower DPI, I honestly Used to be "That Guy!" Od1n and myself were probably the biggest "known members" here that have spoken this way. I swore on 4000 dpi! That was my thing with my Destiny Setup. 4000 DPI, that's because I grew up with it. 12000 dpi felt jittery to me.

Then APEX came along. As an Alpha tester I was committed to test and trial running at 1000hz. At first this felt pretty Jittery to me and I had some real concerns about the quality of performance. But after about a week of playing at 1000hz. and after I realized how much better Aim Assist felt to me while playing at 1000hz. I was completely sold that this is the future of XIM! It takes performance up a few notches, it's more responsive, it cuts through AA better!

Then HE4DHUNTER convinced me to do something I swore I NEVER would do, convert to 12000 DPI. Again, at first this felt jittery to me as much or more so then 1000hz. But I learned to dial in my sensitivity with these new settings and my G502. I learned to steady my hand a little. Now, I won't stray from 12000 DPI either.

(If you don't know who HE4DHUNTER is, watch any of the Admin videos advertising a XIM product since EDGE, if it's COD, then it's HH behind the mouse. The guy is the best XIM COD player on the planet, period!)

My point is. I do these things for a reason. It made sense to me to alter my style and switch to 12000 dpi because I liked how it made AA feel for me when compared to lower DPI settings.

Aim Assist has always been my one and only Nemesis ever since I bought my first XIM and it seems to be just getting stronger with most games. So what you see in my setup is quite literally an evolution of my gaming style over the last 5 years (maybe more)! But it was a necessity for me personally. In order to make AA work for me, to my expectations and still keep linear movement as crisp and clean as possible. This setup is what I had to do.

That being said, everyone is different. This is the story behind my setup. If you asked "what could I do to match your settings?" I don't know how to fully explain that to you without sharing my journey. So sorry for the long winded, ba,blah,ba blah. But that's my answer.

Cheers!"   - RML



THEORY BEHIND THIS SETUP:
- High DPI helps cut through AA (Aim Assist).
- 1000hz helps cut through AA.
- SYNC OFF helps cut through AA.
- Higher Sensitivity helps cut through AA.
- Boost helps cut through AA.
- Smoothing increases AA.



HOW TO APPLY THIS CONCEPT TO YOUR GAME:
- Use your mouses Max DPI setting.
- Activate Advanced settings in XIM Manager.
- Use 1000hz in XIM Manager and 1000 polling on your mouse. (if your mouse doesn't poll at 1000hz consistently and you're feeling Stutter, then run XIM manager at 500hz. This will make AA slightly stronger but fix the stutter. If you're unsure if it's your mouse's polling rate, then add Smoothing and see if it fixes the issue. You should add Smoothing in increments of 1 until stutter is gone. You want to keep Smoothing as low as possible as it will also make AA stronger).
- Change your Sync setting from DEFAULT to SYNC OFF, in manager.
- Adjust your Hip sensitivity in game until you feel comfortable. Adjust your ADS sensitivity the same, but maybe push it a little toward the fast side. Remember higher sens = less AA and raising your ADS sensitivity is the Purest way of eliminating AA. So push it but make sure it's controllable, I suggest you test it on bots in a private game to get the feel for how AA is effecting your aim.
- While testing your aim in a private match, Adjust boost in increments of 100 until AA feels manageable to you. You can then fine tune in smaller increments if you'd like, I'd suggest 25 minimum.

If needed, I suggest the following for applying Smoothing to your setup.
- MUTIPLAYER: 0-4
- BLACKOUT: 4-8

If needed, I suggest the following for applying Boost to your setup.
- BLACKOUT: 0-400 (Going above 400 in Blackout may make long range sniping difficult).
- MULTIPLAYER: 0-1000 (All depends on how much AA you like, if you go above 1000 though aiming gets to responsive IMO).


Got it? Good! On to the setup...

Here's my Full Setup
Beta Firmware/Manager, Link - https://community.xim.tech/index.php?topic=73173.0
In game sensitivity should be maxed at Insane 14
Ads 1x
High Zoom .75x

Aim Assist in game should be [ON]
12000 DPI - http://www.csgosetup.com/dpi-calculator/
G502 Polling is set to 1000
BO4 ST
XIM APEX Polling - 1000
Sync Off


FULL CONFIG (Sync Off) - I'm a NAV user, so you'll have to assign buttons to your liking. This "Full Config Code" is for APEX ONLY!
Code: [Select]
   >>> XIM APEX [BLACKOUT ] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<< 


If the settings above don't work for you then you can try an Anti Aim Assist curve. If you're going to use any of these curves I suggest you first remove any Boost from your settings. Here's a full configuration code. This is an Alpha Stencil ST and not meant for use with ANY particular game. This Configs only purpose is to act as a storage area for AAA curves. Every sub within this config has a AAA curve in it. Every AAA curve I currently recommend is within this config. Just copy/paste the curve from this config into your own.

Anti Aim Assist Curves Storage Config.
Code: [Select]
  >>> XIM APEX [Anti Aim Assist Curves] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

Here's my G502 button mapping (cause several have asked).
(https://i.imgur.com/7nofMHZ.jpg)


CHEERS!


RML do you have a config only for hip and ads not the full config coz everytime i try to paste your full set up it say error>? my xim apex has the latest update and xim manager too..
Title: Re: BO4 My Advanced Setup (20181216)
Post by: dawidmal22 on 07:07 AM - 12/25/18
Hi

I am using your setup.

Is there a way to get more AA using high DPI?

I have increased smoothing under ADS to 8 also lowered boost to 100.
What else i should do?

Can you advise me exactly what is should do to get max AA setings?

Right now when enemy strafing i have problem Killing it.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Trshy on 07:38 AM - 12/25/18
Hi

I am using your setup.

Is there a way to get more AA using high DPI?

I have increased smoothing under ADS to 8 also lowered boost to 100.
What else i should do?

Can you advise me exactly what is should do to get max AA setings?

Right now when enemy strafing i have problem Killing it.

that's because you have too much aim assist, aim assist and strafing don't work well with each other, with high aim assist your long shot will be perfect but your close combat shots will suffer the most due to strafing especially with smgs. your best bet is to lower aim assist and have each of both worlds, little aim assist for long shots, and little aim assist to help break through aim assist bubble easily. try lowering your smoothing to 3, and increase your boost to 400 maybe? and try it and adjust the boost for your liking. you need to find the perfect balance for you to handle close and long ranges.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: dawidmal22 on 10:26 AM - 12/25/18

Thanks,

My hip is 120 with 12000 dpi and ads is 70 now.

Well i was thinking if AA is working fine then strafing will not be a problem. AA will help, but from what you are writing things are different.





Hi

I am using your setup.

Is there a way to get more AA using high DPI?

I have increased smoothing under ADS to 8 also lowered boost to 100.
What else i should do?

Can you advise me exactly what is should do to get max AA setings?

Right now when enemy strafing i have problem Killing it.

that's because you have too much aim assist, aim assist and strafing don't work well with each other, with high aim assist your long shot will be perfect but your close combat shots will suffer the most due to strafing especially with smgs. your best bet is to lower aim assist and have each of both worlds, little aim assist for long shots, and little aim assist to help break through aim assist bubble easily. try lowering your smoothing to 3, and increase your boost to 400 maybe? and try it and adjust the boost for your liking. you need to find the perfect balance for you to handle close and long ranges.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: ceebs on 06:32 PM - 12/25/18
Sorry Trshy, I know youíre trying to help the guy, but I have to disagree with just about everything youíve just told him:
aim assist and strafing don't work well with each other
The opposite is true: whilst strafing you get both AA Slowdown and AA Autorate
with high aim assist your long shot will be perfect
You donít get either AA with long shots. The AA range is limited by weapon type, the longest being with ARs at about 20m. Sniper rifles have no AA at all
close combat shots will suffer the most
CQC is well within the AA range
your best bet is to lower aim assist
You canít lower AA. Itís either on or itís not
try lowering your smoothing to 3, and increase your boost to 400 maybe? and try it and adjust the boost for your liking. you need to find the perfect balance for you to handle close and long ranges.
Smoothing has hardly any effect on AA, it simply quantizes the vanilla BC and boost just increases the stickís DZ.

In response to dawidmal22, if youíre using RMLís latest setup (with the beta firmware and manager via Testflight) your config is optimised for utilising AA. Take it from me, you donít want stronger AA as youíll be constantly be fighting the bubble if you do. Donít forget, AA wonít aim for you, or pull you on target. Itís a hindrence as much as it is a help.
What specifically is happening when youíre strafing?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: jeffpaw96 on 08:41 PM - 12/25/18
Sorry Trshy, I know youíre trying to help the guy, but I have to disagree with just about everything youíve just told him:
aim assist and strafing don't work well with each other
The opposite is true: whilst strafing you get both AA Slowdown and AA Autorate
with high aim assist your long shot will be perfect
You donít get either AA with long shots. The AA range is limited by weapon type, the longest being with ARs at about 20m. Sniper rifles have no AA at all
close combat shots will suffer the most
CQC is well within the AA range
your best bet is to lower aim assist
You canít lower AA. Itís either on or itís not
try lowering your smoothing to 3, and increase your boost to 400 maybe? and try it and adjust the boost for your liking. you need to find the perfect balance for you to handle close and long ranges.
Smoothing has hardly any effect on AA, it simply quantizes the vanilla BC and boost just increases the stickís DZ.

In response to dawidmal22, if youíre using RMLís latest setup (with the beta firmware and manager via Testflight) your config is optimised for utilising AA. Take it from me, you donít want stronger AA as youíll be constantly be fighting the bubble if you do. Donít forget, AA wonít aim for you, or pull you on target. Itís a hindrence as much as it is a help.
What specifically is happening when youíre strafing?

I agree with most of what you've said but I'm surprised you don't notice the significant impact smoothing can have on AA. I'm far from an expert with xim but tracking fast moving targets (i.e. smg players with stock) is substantially better when in ADS with lower smoothing values. Even changing by only 1 whole number is very noticeable and leads to less "stuck in the mud" feeling. The same seems to be true when hip firing with heroes like tempest where smoothing make or breaks ability to consistently land shots.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: ceebs on 07:41 AM - 12/26/18
I play with Smoothing at 3, as my strafing is jittery without it, but I feel no difference in AA across all the different Smoothing values.
What youíre feeling is just the quantization (stair-stepping) effect. It does affect AA, but nowhere near as much as low DPI. But go with what works for you. The most important factor in setting up the Apex is what feels best to you as opposed to what works for somebody else. :)
Title: Re: BO4 My Advanced Setup (20181216)
Post by: dawidmal22 on 08:47 AM - 12/26/18
Hi,

Many thanks for your reply.

Well i dont have problems with aiming, pointing on the enemy.
The oroblem occurs when i strafe and enemy strafe. I was using swat rft and enemy was using same waepon he was able to kill me and i could not. Booth of us where using iron sights. Same lvl of health etc. So what went wrong?

I am using RML setup but i have increased hip
To 120 and ads to 70. Boost is 200 and smoothing is 4

Lets say i belive you guys i dont want to have problems with AA bubble. But can i just try for myself? Maybe i could develop settings for myself. Long time ago i was asking for help for bf4. I receive it moddifed it and my scores whent from 10 kills to 25 kills on SQDM HC.

Are you able to help me what i have to do? So if smoothing doesnt work and boost Should i low dpi on mouse and change pooling rate? Turn on synchronize to default?



Sorry Trshy, I know youíre trying to help the guy, but I have to disagree with just about everything youíve just told him:
aim assist and strafing don't work well with each other
The opposite is true: whilst strafing you get both AA Slowdown and AA Autorate
with high aim assist your long shot will be perfect
You donít get either AA with long shots. The AA range is limited by weapon type, the longest being with ARs at about 20m. Sniper rifles have no AA at all
close combat shots will suffer the most
CQC is well within the AA range
your best bet is to lower aim assist
You canít lower AA. Itís either on or itís not
try lowering your smoothing to 3, and increase your boost to 400 maybe? and try it and adjust the boost for your liking. you need to find the perfect balance for you to handle close and long ranges.
Smoothing has hardly any effect on AA, it simply quantizes the vanilla BC and boost just increases the stickís DZ.

In response to dawidmal22, if youíre using RMLís latest setup (with the beta firmware and manager via Testflight) your config is optimised for utilising AA. Take it from me, you donít want stronger AA as youíll be constantly be fighting the bubble if you do. Donít forget, AA wonít aim for you, or pull you on target. Itís a hindrence as much as it is a help.
What specifically is happening when youíre strafing?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Dodge on 09:48 AM - 12/26/18
Do not forget aspects like mouse (sensor/weight) and mouse surface on AA and aiming.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: S13002931 on 09:57 AM - 12/26/18
What boost do you recommend for AR ? With same exact setup as urs ? Thanks
Title: Re: BO4 My Advanced Setup (20181216)
Post by: TheFlash on 10:45 AM - 12/26/18
Ok. Iím completely new to xim Apex and Iím trying to copy and paste from original post but I canít do it on my phone. Iíve tried searching for how to do it but it never copies the entire code. Any help would be great
Title: Re: BO4 My Advanced Setup (20181216)
Post by: InZaneHD on 01:01 PM - 12/26/18
RML or anyone who might know. Do you have some tips with the setup when playing hardcore? Going for dark matter and struggling with the smgs.. only the smgs remaining
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 01:28 PM - 12/26/18
What boost do you recommend for AR ? With same exact setup as urs ? Thanks

I typically use 300-400 for AR's. But it depends on your play style. If you're camping corners 0-300, If you're pushing alot maybe 400-600. It really depends on your tactics. If you're planning on having ALOT of CQC, then more Boost will probably be necessary as AA is Stronger with Close encounters. If you're playing for mostly mid range fights, then you may not need any Boost. It's about finding your happy medium for your playstyle.

IMO, you're better off with a happy medium then multiple setups. Not every encounter will feel great, but you'll learn to adapt to different situations. If you constantly change your settings, it makes it harder to learn.


Ok. Iím completely new to xim Apex and Iím trying to copy and paste from original post but I canít do it on my phone. Iíve tried searching for how to do it but it never copies the entire code. Any help would be great


If the code select button doesn't work with your phone then try highlighting everything within the code and copying it that way.


RML or anyone who might know. Do you have some tips with the setup when playing hardcore? Going for dark matter and struggling with the smgs.. only the smgs remaining

I've pretty much answered this question multiple times now, however I understand it's a choir to read through this thread. Anyways, SMG's typically means more CQC, which equates to higher levels of Aim Assist. You can just practice and learn to deal with it, or you can use Higher Boost levels to combat the AA. I also like to use 1.25 X/Y ratio with SMG's as they typically have higher levels of recoil as well.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: andreaste on 02:15 PM - 12/26/18
Im using 16k dpi 1k hz and i really like the aim assist, but it ive got soo much jitter even with 20 smoothing. What can i do to reduce this issue? Thanks
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 03:33 PM - 12/26/18
Im using 16k dpi 1k hz and i really like the aim assist, but it ive got soo much jitter even with 20 smoothing. What can i do to reduce this issue? Thanks

3 options - Lower DPI, Lower hz, or Default Sync

I would try default Sync and see how it feels. Just divide your sensitivity by 8.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: ceebs on 04:44 PM - 12/26/18
Hi,

Many thanks for your reply.

Well i dont have problems with aiming, pointing on the enemy.
The oroblem occurs when i strafe and enemy strafe. I was using swat rft and enemy was using same waepon he was able to kill me and i could not. Booth of us where using iron sights. Same lvl of health etc. So what went wrong?

I am using RML setup but i have increased hip
To 120 and ads to 70. Boost is 200 and smoothing is 4

Lets say i belive you guys i dont want to have problems with AA bubble. But can i just try for myself? Maybe i could develop settings for myself. Long time ago i was asking for help for bf4. I receive it moddifed it and my scores whent from 10 kills to 25 kills on SQDM HC.

Are you able to help me what i have to do? So if smoothing doesnt work and boost Should i low dpi on mouse and change pooling rate? Turn on synchronize to
Honestly, there are so many variables (mouse, pad, playstyle and personal preference) that I would find it difficult, if not impossible, to go through all the options with you. Only RML has that kind of dedication/patience.
I can tell you though, that I have no difficulty with strafing and tracking targets in BO IIII. My settings are on page 39 of this thread. Hopefully, something in there will work for you.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: [email protected] on 11:30 PM - 12/26/18
Can someone please explain in detail (images if need be) how yo copy and paste these configurations in the apex manager??? I have downloaded the firmware and manager but everytime I click the Paste button it just says error.  Please HELP
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Poison on 11:43 PM - 12/26/18
Hey guys, so I'm hoping someone in this thread could help me out if possible. I'm having this issue where ADS speeds are different on certain guns I think? To give an example, on weapons like the Maddox or ICR my ADS speeds are fine and I can hit shots no problem, but on guns like the Saug and Spitfire, it seems like my sensitivity drops. I've tried to troubleshoot the problem but I can't tell if it's a ADS delay issue (I'm using 400 delay) or maybe the ADS speeds vary between different attachments? I typically use iron sights for SMG's and Reflex for AR's.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: andreaste on 05:00 AM - 12/27/18
Im using 16k dpi 1k hz and i really like the aim assist, but it ive got soo much jitter even with 20 smoothing. What can i do to reduce this issue? Thanks

3 options - Lower DPI, Lower hz, or Default Sync

I would try default Sync and see how it feels. Just divide your sensitivity by 8.
Right now im using 1000hz on mouse and 500hz on apex and it feels better, is it wrong or can i use this setup?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 07:44 AM - 12/27/18
Im using 16k dpi 1k hz and i really like the aim assist, but it ive got soo much jitter even with 20 smoothing. What can i do to reduce this issue? Thanks

3 options - Lower DPI, Lower hz, or Default Sync

I would try default Sync and see how it feels. Just divide your sensitivity by 8.
Right now im using 1000hz on mouse and 500hz on apex and it feels better, is it wrong or can i use this setup?

Yes that's fine, as a matter of fact, some of the best XIM players out there do exactly that. Me personally, I want things as responsive as possible. That means 1000hz, Sync Off and 12000 DPI. But for some this is either not possible, due to their mouse, or they just don't like how responsive it is. Especially coming from XIM4. People adapt to things, if you're used to how XIM4 feels then my settings may make you slightly uncomfortable.

Trust me, as I stated in the OP. I was slightly uncomfortable with my settings for a few weeks. However, now, everything that's not 1000hz, Sync Off and 12000 dpi feels sluggish and unresponsive to me. I literally can't stand XIM4 anymore, I gave it away and haven't looked back. It felt so outdated!


Hey guys, so I'm hoping someone in this thread could help me out if possible. I'm having this issue where ADS speeds are different on certain guns I think? To give an example, on weapons like the Maddox or ICR my ADS speeds are fine and I can hit shots no problem, but on guns like the Saug and Spitfire, it seems like my sensitivity drops. I've tried to troubleshoot the problem but I can't tell if it's a ADS delay issue (I'm using 400 delay) or maybe the ADS speeds vary between different attachments? I typically use iron sights for SMG's and Reflex for AR's.


Are you talking spamming ADS or while ADSed on a target?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: S13002931 on 08:13 AM - 12/27/18
 Will you please make 12k dpi 1k polling config for PUBG ?

Thanks
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Poison on 10:47 AM - 12/27/18
So after messing around in custom maches for a bit, I basically had to double my sens. I hadn't played BO4 since they added the ADS multiplier in the options, so i'm not sure if they messed with anything since then, but I found it super weird I had to up my sensitivity so much. It sucks too, my settings were perfect before I stopped playing.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: HanSolo82 on 04:05 PM - 12/27/18
So after messing around in custom maches for a bit, I basically had to double my sens. I hadn't played BO4 since they added the ADS multiplier in the options, so i'm not sure if they messed with anything since then, but I found it super weird I had to up my sensitivity so much. It sucks too, my settings were perfect before I stopped playing.

Dude same here, came back for Christmas Noobs and took me an hour in custom games to found that sweet spot again. My first few games readjusting I felt that I was the christmas noob.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: SwipeFPS on 08:50 PM - 12/27/18
Why use 1000hz on g502 if it canít poll consistently at 1000hz? Just wondering
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 11:16 PM - 12/27/18
Why use 1000hz on g502 if it canít poll consistently at 1000hz? Just wondering

Ive never had an issue with the 502 at 1000hz.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: SwipeFPS on 01:12 AM - 12/28/18
Why use 1000hz on g502 if it canít poll consistently at 1000hz? Just wondering

Ive never had an issue with the 502 at 1000hz.
how would I know if mine isnít polling right if indecide to try 1000hz
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 08:48 AM - 12/28/18
Why use 1000hz on g502 if it canít poll consistently at 1000hz? Just wondering

Ive never had an issue with the 502 at 1000hz.
how would I know if mine isnít polling right if indecide to try 1000hz

You'll have pretty bad stutter if it's not polling right.

Title: Re: BO4 My Advanced Setup (20181216)
Post by: Happy Camper Cavalry on 10:49 AM - 12/28/18
Why use 1000hz on g502 if it canít poll consistently at 1000hz? Just wondering

Ive never had an issue with the 502 at 1000hz.
how would I know if mine isnít polling right if indecide to try 1000hz

You'll have pretty bad stutter if it's not polling right.
I was having stuttering issues with my g502 also. Then I started messing around with the weights. On a hard pad it was getting caught and I couldn't imagine on a soft pad. I removed the two weights at the tips and only have the 3 chevron weights coming up from the base. This has helped the stuttering quite a bit, especially went I snipe.
Try it
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 01:17 PM - 12/28/18
I removed the entire bottom plate on my G502, it's just added weight and not needed. I'm not sure why anyone would use weights with a mouse. The whole concept of making it heavier has always boggled my mind.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: FopaUK on 04:05 PM - 12/28/18
Getting an error when pasting this config, running latest beta firmware, i am a fairly competent Xim user..  Any ideas?

I have a G502 @ 12k using 1khz apex.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: havoxxx on 04:11 PM - 12/28/18
I removed the entire bottom plate on my G502, it's just added weight and not needed. I'm not sure why anyone would use weights with a mouse. The whole concept of making it heavier has always boggled my mind.

I play with 2 x 3.6 gs added to the bottom to help with left and right pivot, helps me "V"  a lot easier.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 09:37 PM - 12/28/18
Getting an error when pasting this config, running latest beta firmware, i am a fairly competent Xim user..  Any ideas?

I have a G502 @ 12k using 1khz apex.

You have to update firmware and manager aswell. Make sure the old manager is off of your device. To check which firmware and manager youre on, tap the 3 dots at the top righg of your config. Then select About. You can then see which firmware and manager your running. Both should be 20181204.

Title: Re: BO4 My Advanced Setup (20181216)
Post by: wnb on 11:32 PM - 12/28/18
ok been a long road to get here.. dont think ive moved for 3 days cept bios n bed. so let me get this right please. im using the AA and then i want to be able to over power it enough to get my aimer to his head yer more or less?? cause i been using the xim trying to nullify all auto aim but it gets very hard to keep up with the pace

ive got your settings in now RML, just changed sens.. but im feeling like maybe im losing control on the auto aim ADS (currently im at 70 i think u were at 50) would i be right in saying the lower sens is alil bit more control?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 12:04 AM - 12/29/18
ok been a long road to get here.. dont think ive moved for 3 days cept bios n bed. so let me get this right please. im using the AA and then i want to be able to over power it enough to get my aimer to his head yer more or less?? cause i been using the xim trying to nullify all auto aim but it gets very hard to keep up with the pace

ive got your settings in now RML, just changed sens.. but im feeling like maybe im losing control on the auto aim ADS (currently im at 70 i think u were at 50) would i be right in saying the lower sens is alil bit more control?

Yes.. you'd be very right.  ;)
Title: Re: BO4 My Advanced Setup (20181216)
Post by: neat on 04:56 AM - 12/29/18
Any XIM4-users playin BO4 in here?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Roronoa on 05:45 PM - 12/29/18
hello RML, I use your config (12k dpi, sync off, 600 boost), with my g502 it was the fire! Since I had to change the mouse I have a rival 600, it is much lighter, my problem now is that when I aim, if I put a little mouse shots my viewer comes out of the bubble! there is a kind of acceleration, it's embarrassing and I do not understand what the problem is, can you please help me?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 07:11 PM - 12/29/18
hello RML, I use your config (12k dpi, sync off, 600 boost), with my g502 it was the fire! Since I had to change the mouse I have a rival 600, it is much lighter, my problem now is that when I aim, if I put a little mouse shots my viewer comes out of the bubble! there is a kind of acceleration, it's embarrassing and I do not understand what the problem is, can you please help me?

Sounds like you should lower your boost. Try lowering by 100 increments until it feels right again.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Roronoa on 08:53 PM - 12/29/18
thank you RML, it worked for me! I lowered my boost and my sensitivity, another question. the boost works in increments of 100 ?? I mean between 0 and 100 there are no effects ??
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Domenic.HRO on 10:39 AM - 12/30/18
Hello rml i use your config. Which boost value do you use with MP weapons and which boost value do Assault weapons use?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: FopaUK on 10:44 AM - 12/30/18
Getting an error when pasting this config, running latest beta firmware, i am a fairly competent Xim user..  Any ideas?

I have a G502 @ 12k using 1khz apex.

You have to update firmware and manager aswell. Make sure the old manager is off of your device. To check which firmware and manager youre on, tap the 3 dots at the top righg of your config. Then select About. You can then see which firmware and manager your running. Both should be 20181204.

You're right, my beta manager was out of sync.  Thanks!
Title: Re: BO4 My Advanced Setup (20181216)
Post by: jeffpaw96 on 10:47 AM - 12/30/18
thank you RML, it worked for me! I lowered my boost and my sensitivity, another question. the boost works in increments of 100 ?? I mean between 0 and 100 there are no effects ??
No, it is a sliding scale. 100 boost adjustments are a good place to start so you can easily detect differences. Personally, I adjust by 50
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Roronoa on 11:58 AM - 12/30/18
Ok thanks :)
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Jedi Master Bates on 02:02 PM - 12/30/18
Hi RML,

I've been using your setup here since day one, and it was really a big hit for me when the game first came out. Since, things have been feeling clunky and out of sync with all the new updates, so I decided to do some investigating. Turns out I had pretty old firmware for my Xim and Manager. I just recently downloaded the new beta firmware (20181109) for both my Xim and manager, but I am still getting the error message when I try to apply your new changes to my ST. I looked for the 20181204 update that you referenced, but the latest I can find in the forums is 20180501. Could you link me the new firmware update? I'm having a hell of a time with all this, mainly because I'm as green as they come when it comes to the Xim.

Cheers mate!
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Worthya1 on 02:22 PM - 12/30/18
I think this is the link that you are after.

https://community.xim.tech/index.php?topic=73173.0
Title: Re: BO4 My Advanced Setup (20181216)
Post by: wnb on 10:40 PM - 12/30/18
sniping... ok im dialed in ok at hip 55sens 5smoothing ads 45sens 400 delay   smoothing  600 boost do ok can win FFA but get carved just as often hiest im killer at cause its slower. i think i lose the ability to aim at longer range how do i combat that (what values for some reason i just cant get my cursor on his forehead like normal almost like it just wont follow that small movement)so then would i use something like hip/ads 45/35? or lower even ? also does hip and ads effect each other ? like can i have hip super high to turn and get into line of sight so auto aim just takes it closer  or will having the to values far apart effect it? more then if i had like 50/45 ?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: N1TRO on 09:59 AM - 12/31/18
Yes you can have a super high hip for turning and a low ads but it's not recommended as the massive difference in sense will throw you off and cause bad muscle memory. It's all about finding a middle ground. Find a sense that you can turn well enough with and also aim pretty well with then have a slightly lower ads value. Also at longer ranges you will notice higher boost values more meaning it will be harder to do tiny movements. If your sensitivity is high and you have a high boost you will struggle at range. Either lower your boost to 300-400 area or lower your sensitivity.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Roronoa on 11:00 AM - 12/31/18
I play with the config RML I am 100 in hip. to advise you which ads value? moreover I have the impression that AA has become stronger !! not you ?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: bastyen on 08:37 AM - 01/01/19
Hello RML
Happy new year 2019!
I have a question for you :
If you disable the AIM ASSIST in the game, what would be the settings of the XIM APEX compared to your settings?
Best regards
S
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 11:03 AM - 01/01/19
Hello RML
Happy new year 2019!
I have a question for you :
If you disable the AIM ASSIST in the game, what would be the settings of the XIM APEX compared to your settings?
Best regards
S

Thanks and Happy New Year to you and All Ximmers as well!

If I were going to turn AA off, the I would probably just play Vanilla ST, no curves, no boost, and a lower sensitivity then I generally run. 0d1n has a nice Video in the tutorial section on finding your perfect sensitivity. Thats what I'd do as a starting point.

Cheers!
Title: Re: BO4 My Advanced Setup (20181216)
Post by: bastyen on 12:11 PM - 01/01/19
Hello RML
Happy new year 2019!
I have a question for you :
If you disable the AIM ASSIST in the game, what would be the settings of the XIM APEX compared to your settings?
Best regards
S

Thanks and Happy New Year to you and All Ximmers as well!

If I were going to turn AA off, the I would probably just play Vanilla ST, no curves, no boost, and a lower sensitivity then I generally run. 0d1n has a nice Video in the tutorial section on finding your perfect sensitivity. Thats what I'd do as a starting point.

Cheers!

Thank you for your answer.
Can you tell me where I can find the VANILLA ST?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: stormynight on 12:26 PM - 01/01/19
Hello RML
Happy new year 2019!
I have a question for you :
If you disable the AIM ASSIST in the game, what would be the settings of the XIM APEX compared to your settings?
Best regards
S

Thanks and Happy New Year to you and All Ximmers as well!

If I were going to turn AA off, the I would probably just play Vanilla ST, no curves, no boost, and a lower sensitivity then I generally run. 0d1n has a nice Video in the tutorial section on finding your perfect sensitivity. Thats what I'd do as a starting point.

Cheers!

Thank you for your answer.
Can you tell me where I can find the VANILLA ST?

Itís just the ST you get in the manager.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: bastyen on 12:29 PM - 01/01/19
Ok, lol , thanks !  8)
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Roronoa on 04:04 PM - 01/03/19
hello rml, i had a question for you. why do not you recommend the boost?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 06:39 PM - 01/03/19
hello rml, i had a question for you. why do not you recommend the boost?

I think the best way to answer this question is to give you an RML explanation of Boost. Then I think you'll understand why it should be avoided unless absolutely necessary.

The real difference between Boost and Ballistics is Boost is instantaneous from point A to point B. It allows you to manipulate the starting point of the right stick. So if you pick up your controller and slowly move the right stick you will feel a certain amount of play "Dead Zone" before your movement actually registers on the screen. As you push harder on the right stick your movement speed will increase. Boost allows you to completely bypass that dead zone (if you wish) and you can pretty much choose the starting point of your right stick movement. So if you crank Boost WAY up, it's just like starting your movement at the point where the right stick is immediately pegged. Ballistics allow you the same benefit except you can slowly ramp up or down to the desired speed instead of getting there instantaneously. Also Boost only works as acceleration, where ballistics can also slow your movement down if so desired.

Think of it like an electric and a combustion motor.

- Unless you're using a VFD, Electric power is instantaneous, as soon as you turn it on, you have the max output that your motor can draw from it's power core. - BOOST -
- Combustion motors have a lot of mechanical parts that take longer to build up torque. - Ballistic curve -

(http://simanaitissays.files.wordpress.com/2013/07/torquecurves1.jpg)

Now ballistics can be instantaneous obviously, if you make a ballistic like the electric graph above.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: wnb on 10:34 PM - 01/03/19
hello rml, i had a question for you. why do not you recommend the boost?

I think the best way to answer this question is to give you an RML explanation of Boost. Then I think you'll understand why it should be avoided unless absolutely necessary.

The real difference between Boost and Ballistics is Boost is instantaneous from point A to point B. It allows you to manipulate the starting point of the right stick. So if you pick up your controller and slowly move the right stick you will feel a certain amount of play "Dead Zone" before your movement actually registers on the screen. As you push harder on the right stick your movement speed will increase. Boost allows you to completely bypass that dead zone (if you wish) and you can pretty much choose the starting point of your right stick movement. So if you crank Boost WAY up, it's just like starting your movement at the point where the right stick is immediately pegged. Ballistics allow you the same benefit except you can slowly ramp up or down to the desired speed instead of getting there instantaneously. Also Boost only works as acceleration, where ballistics can also slow your movement down if so desired.

Think of it like an electric and a combustion motor.

- Unless you're using a VFD, Electric power is instantaneous, as soon as you turn it on, you have the max output that your motor can draw from it's power core. - BOOST -
- Combustion motors have a lot of mechanical parts that take longer to build up torque. - Ballistic curve -

(http://simanaitissays.files.wordpress.com/2013/07/torquecurves1.jpg)

Now ballistics can be instantaneous obviously, if you make a ballistic like the electric graph above.

Relating Mechanics Lessons?
haha jks good explenation man,

i was going to ask something similar i understand now tho. but. when i use the ADS profile with no wepon attached i get my 360 at (roughly 15cm) as apposed to hip 30(cm) is that doing me a hinderance for my long range encounters? i am mainly playing Black out at the moment and im almost about to turn off AA and go to my settings, dont get me wrong i think your settings are ABSOLUTLELY FKN AMAZING! (no joke) but... when im in black out i feel i lose out on longer range encounters.. and some times i just cant stick to em ..mid range and longer..  is this because of the boost? im running 50 hip no boost and 38 ads with boost 600? 5 smoothing on each (your settings) and ingame i have 100% sense 75% zoomed sense ..
can you give me the messurements for what hip to ads should be ? like is it half or 2/3s point a to point b i mean eg 360/30
thanks sorry im abit convoluted in my posts.

also i dont know if i mis read your original post. but i was having real problems with the wing suit, (because i had the turn assist set to same button as ADS (RMouse) after changing this to another key so its not buggin out.. OMG that turn assist makes the wing suit brilliant.... 200sense/1500 boost and for driving OMG instant U turn.. with out dragging the mouse from one side of the table to the other...
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Phoenix10 on 02:02 AM - 01/04/19
RML

i dont know what is wrong with me
but i think your previous setup was better that the current set up ..

am a blackout player and i use G502 and Nav Controller !!

i fill the previous set up easiest to track and kill people from mid to long distances


what is wrong with me ????
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Roronoa on 05:38 AM - 01/04/19
I understood thank you very much for your explanation!
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 10:21 AM - 01/04/19
RML

i dont know what is wrong with me
but i think your previous setup was better that the current set up ..

am a blackout player and i use G502 and Nav Controller !!

i fill the previous set up easiest to track and kill people from mid to long distances


what is wrong with me ????

I don't think there's anything wrong with you. I think everyone has slight differences "some drastic". If my prior setup worked best for you, stick to it.  ;)
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Verone- on 12:42 PM - 01/04/19
@RML
If you'd have the g502 Hero, would you change your config to 16k dpi?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: InZaneHD on 03:12 PM - 01/04/19
Probably mentioned before but this post is to big to look for answer.

Im using 16k dpi 40hip 20ads sens. And it feels good. Im soon 10th Prestige and ~2kd  mp player want to improve my aim further.

Is there a hip/ads ratio thats better for improving muscle memory?
Also using 400-600 boost on ads.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Emahji- on 07:18 PM - 01/04/19
@RML, it wonít let me copy or paste anything. I keep receiving an error, any help? All other forums work for me dealing with copy and paste,
Title: Re: BO4 My Advanced Setup (20181216)
Post by: andreaste on 09:50 PM - 01/04/19
RML

i dont know what is wrong with me
but i think your previous setup was better that the current set up ..

am a blackout player and i use G502 and Nav Controller !!

i fill the previous set up easiest to track and kill people from mid to long distances


what is wrong with me ????

I don't think there's anything wrong with you. I think everyone has slight differences "some drastic". If my prior setup worked best for you, stick to it.  ;)

Same for me i really like the old setup, but unfortunately i lost it. Where i can find it? or can any of u link me here? It would be really appreciated ty
Title: Re: BO4 My Advanced Setup (20181216)
Post by: puinsai on 12:10 AM - 01/05/19
RML

i dont know what is wrong with me
but i think your previous setup was better that the current set up ..

am a blackout player and i use G502 and Nav Controller !!

i fill the previous set up easiest to track and kill people from mid to long distances


what is wrong with me ????

I don't think there's anything wrong with you. I think everyone has slight differences "some drastic". If my prior setup worked best for you, stick to it.  ;)

Same for me i really like the old setup, but unfortunately i lost it. Where i can find it? or can any of u link me here? It would be really appreciated ty

i think it was this :

1000hz
Sync Default
Hip - 8.5
ADS - 6.75
ADS delay - 400ms (Smooth Aim OFF)
Boost - 400
Title: Re: BO4 My Advanced Setup (20181216)
Post by: bastyen on 04:15 AM - 01/05/19
RML

i dont know what is wrong with me
but i think your previous setup was better that the current set up ..

am a blackout player and i use G502 and Nav Controller !!

i fill the previous set up easiest to track and kill people from mid to long distances


what is wrong with me ????

I don't think there's anything wrong with you. I think everyone has slight differences "some drastic". If my prior setup worked best for you, stick to it.  ;)

Same for me i really like the old setup, but unfortunately i lost it. Where i can find it? or can any of u link me here? It would be really appreciated ty

i think it was this :

1000hz
Sync Default
Hip - 8.5
ADS - 6.75
ADS delay - 400ms (Smooth Aim OFF)
Boost - 400

No curves?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: andreaste on 02:14 PM - 01/05/19
RML

i dont know what is wrong with me
but i think your previous setup was better that the current set up ..

am a blackout player and i use G502 and Nav Controller !!

i fill the previous set up easiest to track and kill people from mid to long distances


what is wrong with me ????

I don't think there's anything wrong with you. I think everyone has slight differences "some drastic". If my prior setup worked best for you, stick to it.  ;)

Same for me i really like the old setup, but unfortunately i lost it. Where i can find it? or can any of u link me here? It would be really appreciated ty

i think it was this :

1000hz
Sync Default
Hip - 8.5
ADS - 6.75
ADS delay - 400ms (Smooth Aim OFF)
Boost - 400

No curves?
i was using a curve, still waiting for someone to post it...
Title: Re: BO4 My Advanced Setup (20181216)
Post by: obi-wan_legend on 08:10 PM - 01/05/19
@RML, it wonít let me copy or paste anything. I keep receiving an error, any help? All other forums work for me dealing with copy and paste,

Your using the wrong firmwar/manager
Title: Re: BO4 My Advanced Setup (20181216)
Post by: freezer13111975 on 05:13 AM - 01/06/19
Hello RML I can not insert your full config is always an error of the Apex have the latest firmware on it please help
Title: Re: BO4 My Advanced Setup (20181216)
Post by: wnb on 03:47 PM - 01/06/19
download the latest beta firmware.. (in the download section at the top is the beta sections )
download the latest manager....
update both of them.
then try to copy the config... if your copying a config its the first page. b4 hip settings.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: sennsoph on 04:57 AM - 01/07/19

First of, thank you for your effort...

Been playing a few days with this full config... but now i noticed, copying your full config code doesnt give you any curves correct? All other details are well copied. Adding the second code to the balistic manager dont work. I use the exact same firmware as you do.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: JoTi on 09:33 AM - 01/07/19

First of, thank you for your effort...

Been playing a few days with this full config... but now i noticed, copying your full config code doesnt give you any curves correct? All other details are well copied. Adding the second code to the balistic manager dont work. I use the exact same firmware as you do.

PLEASE NOTE: I'm currently getting away from any AA curves with APEX. APEX polling at 1000hz combined with SYNC OFF, 12000 DPI and some added boost cuts through AA nicely.

RML play BO4 without curves.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: sennsoph on 10:21 AM - 01/07/19
Thank you mate. I missed that.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 04:05 PM - 01/07/19
Thanks to everyone helping out with the Copy/Paste - Firmware/Manager questions!

Cheers!
Title: Re: BO4 My Advanced Setup (20181216)
Post by: S13002931 on 09:59 AM - 01/08/19
Thanks to everyone helping out with the Copy/Paste - Firmware/Manager questions!

Cheers!

Hi

May I pls know if you happen to have  a configuration for  Cod WW2 ? 

Thanks
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 10:35 AM - 01/08/19
I've never played it, sry. Not really even a COD guy. I just like BO.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Roronoa on 10:43 AM - 01/08/19
finally in all this, what is your final config mister RML? :)
Title: Re: BO4 My Advanced Setup (20181216)
Post by: ceebs on 11:20 AM - 01/08/19
finally in all this, what is your final config mister RML? :)
lol! He gotcha, RML.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 02:26 PM - 01/08/19
finally in all this, what is your final config mister RML? :)
lol! He gotcha, RML.

I haven't played the game in almost a month. So yeah, when I come back... It's probably going to change!  ;)

IDK, there's alot of different ways to combat AA.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: destined1ne on 02:29 PM - 01/08/19
Do you play with Aim Assist setting on or off?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 04:25 PM - 01/08/19
AA [ON]
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Phoenix10 on 07:21 AM - 01/09/19
RML

See what problem i faced last week..

Until now both of your setups was working perfect for me..

Now I noticed that are getting laggy
I face problems on turning even if are ads on or hip
And i can't figure out what is the problem

Did cod make any changes?
Or it the setup problem or even my xims problem

I thing we hitting speed stop but am not really sure because some times i have problem even on slow motion
Title: Re: BO4 My Advanced Setup (20181216)
Post by: destined1ne on 08:19 AM - 01/09/19
RML

See what problem i faced last week..

Until now both of your setups was working perfect for me..

Now I noticed that are getting laggy
I face problems on turning even if are ads on or hip
And i can't figure out what is the problem

Did cod make any changes?
Or it the setup problem or even my xims problem

I thing we hitting speed stop but am not really sure because some times i have problem even on slow motion

did you change your in-game settings? make sure the sens is on max.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Phoenix10 on 02:24 PM - 01/09/19
Yes man its on max 😔
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Omarf826 on 03:53 PM - 01/09/19
I feel like also the latest config still there are issues with certain engagements..  long range battles with the abr/any AR have been a nightmare.. zero micro movement ontop of Virtually no AA, shots are just inaccurate at long range fights even with 3-400 boost and 3-4 smoothing..  before all these patches that wasnt the case.. i would easily mow ppl down w the abr from any range... and dont get me started on close range gun fights with subs.. its aids with the amount of AA you get.. you would have to run high boost 5-600 which in turn screws aim for your long range fights. Nothings merely set in stone in one config which also screws up muscle memory
Title: Re: BO4 My Advanced Setup (20181216)
Post by: d1sable on 06:37 PM - 01/09/19
Playing with any SA / Boost / curves whatever will cause that. Your not playing 1 to 1.

Playing 12k dpi default sync with no other changes feels completely bang on to me.

Title: Re: BO4 My Advanced Setup (20181216)
Post by: freezer13111975 on 01:28 AM - 01/10/19
Thank you very much helped me still have a question how can the gestures in BO still incorporate because someone has a good idea
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Omarf826 on 01:31 AM - 01/10/19
Playing with any SA / Boost / curves whatever will cause that. Your not playing 1 to 1.

Playing 12k dpi default sync with no other changes feels completely bang on to me.


Default sync with 0 boost/ no curves to help w strong AA??!  :o :o  thats a nono, i highly doubt your winning your gun fights cqc / etc.. im on sync off and i tried no boost and no curves and it was a nightmare.. too much AA
Title: Re: BO4 My Advanced Setup (20181216)
Post by: d1sable on 03:09 AM - 01/10/19
Each to there own i guess. I have a 3.3 kd so i assure u i am winning my gun fights. I dont find the AA to be a problem. I have tried with boost but it just leads to inconsistent fights at mid to long range for me.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: baadnewz on 03:15 AM - 01/10/19
Each to there own i guess. I have a 3.3 kd so i assure u i am winning my gun fights. I dont find the AA to be a problem. I have tried with boost but it just leads to inconsistent fights at mid to long range for me.

Weren't you using 4K DPI? You changed your settings mate?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: d1sable on 03:30 AM - 01/10/19
Yeah 12k now as i brought a G502 and just thought i would start at max. Feels great to me.

Anyway i didnt want to hijack the thread was simply suggesting to someone that was struggling at distance that playing with boost might be their issue.

We're all individuals ofc.

That led to that getting poo pooed and a suggestion i cant win gunfights. Think ill dip out again, was just trying to help.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Omarf826 on 04:13 AM - 01/10/19
Yeah 12k now as i brought a G502 and just thought i would start at max. Feels great to me.

Anyway i didnt want to hijack the thread was simply suggesting to someone that was struggling at distance that playing with boost might be their issue.

We're all individuals ofc.

That led to that getting poo pooed and a suggestion i cant win gunfights. Think ill dip out again, was just trying to help.

Not tryna talk down on you or anything.. that wasnt my intention at all.. im just saying based off my long personal experience of the game + a  bunch of other people on this thread are all complaining about AA issues especially when they dont incorporate boost into their setups..? I just dont see how your  running default sync in blackout wtih no boost or curves and not struggling with AA, when sync off has less AA and i still run into issues in close quarters etc.. on the contrary, running more boost still has diminishing returns for long range fights, someone else will have to shine some light on how to solve the issue with all range engagements in one config... without AA being an issue and totally hindering ur accuracy
Title: Re: BO4 My Advanced Setup (20181216)
Post by: d1sable on 04:45 AM - 01/10/19
Yeah its fine i was talking about mutliplayer mainly but i run the same in blackout and have around an 8 KD in that last i looked running default sync 12k.

Have quite a few solo squad wins too, i dont play it all that often though. (Think in level 50 ish).

I have tried boost and liked it in some engamenets (close with smgs mainly) like u say but overall i feel it takes away consistancey.

In regards to blackout

Snipers have no AA so they are easy
I don't use smgs past early game so no issues there.
So that leaves assault rifles at all ranges which i feel defualt sync on vanilla st is best at

Are u placing ur crosshair on people before using ADS where possible? I find if u ads then attempt to correct later it may cause more issues. Again just my thoughts, what works for me may not for others.

Title: Re: BO4 My Advanced Setup (20181216)
Post by: Verone- on 05:31 AM - 01/10/19
Yeah its fine i was talking about mutliplayer mainly but i run the same in blackout and have around an 8 KD in that last i looked running default sync 12k.

Have quite a few solo squad wins too, i dont play it all that often though. (Think in level 50 ish).

I have tried boost and liked it in some engamenets (close with smgs mainly) like u say but overall i feel it takes away consistancey.

In regards to blackout

Snipers have no AA so they are easy
I don't use smgs past early game so no issues there.
So that leaves assault rifles at all ranges which i feel defualt sync on vanilla st is best at

Are u placing ur crosshair on people before using ADS where possible? I find if u ads then attempt to correct later it may cause more issues. Again just my thoughts, what works for me may not for others.
You have some blackout video material? Always liked your videos, don't think I saw blackout yet tho. Did see some MP but don't like that mode
Title: Re: BO4 My Advanced Setup (20181216)
Post by: d1sable on 05:50 AM - 01/10/19
Have quite a few i think, ill try and sort one out later tonight.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: S13002931 on 06:32 AM - 01/10/19
Whats works for RML, works for me too. :)
Title: Re: BO4 My Advanced Setup (20181216)
Post by: d1sable on 07:22 AM - 01/10/19
Yeah thats fine guys was just trying to offer some advice which could be good or bad!

Can i ask that people dm me if they like rather than comment here as i do not want to take away from this great thread and RMLs work.

As i said i have tried this config and did enjoy parts of it.

Carry on gamers!
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 09:41 AM - 01/10/19
You can share here, I really donít care and thatís really what this thread is about. Besides Iíve stated many times already that you should avoid boost if possible. There are many ways to combat AA. Iíve includes all of them in this setup. Then added how to add boost if needed and included a link to multiple curves as well. Thereís really no ďone for allĒ setup. Thereís tools. Thatís the way this thread should be viewed. Hereís the tools, hereís how I use them. Now go young grasshopper, do with them what you will. And of course share. Itís ok.  :)
Title: Re: BO4 My Advanced Setup (20181216)
Post by: TropicThunder on 11:36 AM - 01/10/19
Hello fellow ximers, my Xbox gamer tag is LVLoLLy....
I have 171 wins in blackout with a 5.5 kd and 20% win rate. 71 solo wins btw.
I use the vanilla st with sync off and a little smoothing but nothing else. No curves no boost no steady aim. These setting I rarely ever have problems with. I have basically tried every set up posted on the forums and find this one works the best.
70 hip and 35 ads, 5 smoothing. Give it a try and add me on Xbox if youíd like to pay
Title: Re: BO4 My Advanced Setup (20181216)
Post by: cbredeyejedi on 12:02 PM - 01/10/19
Does XukHeadHunter use a really high sensitivity? I noticed on his old bo3 vids hes running 72ads and 78hip. Ive been toying with it and it feels really responsive and nice but longer range is a little squirrly. I saw some others run around 70 ads as well. 50 feels more accurate and reliable but sometimes i lose target if they are strafing.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: destined1ne on 12:16 PM - 01/10/19
Hello fellow ximers, my Xbox gamer tag is LVLoLLy....
I have 171 wins in blackout with a 5.5 kd and 20% win rate. 71 solo wins btw.
I use the vanilla st with sync off and a little smoothing but nothing else. No curves no boost no steady aim. These setting I rarely ever have problems with. I have basically tried every set up posted on the forums and find this one works the best.
70 hip and 35 ads, 5 smoothing. Give it a try and add me on Xbox if youíd like to pay

That's a lot of wins. Very impressive!! Let's play some time! Do you mind copying your xim config code here so I can paste into mine? Thanks!
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Phoenix10 on 01:07 PM - 01/10/19
Hello fellow ximers, my Xbox gamer tag is LVLoLLy....
I have 171 wins in blackout with a 5.5 kd and 20% win rate. 71 solo wins btw.
I use the vanilla st with sync off and a little smoothing but nothing else. No curves no boost no steady aim. These setting I rarely ever have problems with. I have basically tried every set up posted on the forums and find this one works the best.
70 hip and 35 ads, 5 smoothing. Give it a try and add me on Xbox if youíd like to pay

Can you share your config?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: d1sable on 02:12 PM - 01/10/19
Did a post with my config and a vid here for those that wanted to check it out - rocking around a 7 K/D upon checking stats - Cheers 

https://community.xim.tech/index.php?topic=74394.0

Title: Re: BO4 My Advanced Setup (20181216)
Post by: TropicThunder on 05:34 PM - 01/10/19
Hello fellow ximers, my Xbox gamer tag is LVLoLLy....
I have 171 wins in blackout with a 5.5 kd and 20% win rate. 71 solo wins btw.
I use the vanilla st with sync off and a little smoothing but nothing else. No curves no boost no steady aim. These setting I rarely ever have problems with. I have basically tried every set up posted on the forums and find this one works the best.
70 hip and 35 ads, 5 smoothing. Give it a try and add me on Xbox if youíd like to pay

Can you share your config?

Here you guys go,
>>> XIM APEX [BLACKOUT sync off] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

Btw itís 12000 dpi with my settings. 1000hz
Title: Re: BO4 My Advanced Setup (20181216)
Post by: TropicThunder on 05:36 PM - 01/10/19
Hello fellow ximers, my Xbox gamer tag is LVLoLLy....
I have 171 wins in blackout with a 5.5 kd and 20% win rate. 71 solo wins btw.
I use the vanilla st with sync off and a little smoothing but nothing else. No curves no boost no steady aim. These setting I rarely ever have problems with. I have basically tried every set up posted on the forums and find this one works the best.
70 hip and 35 ads, 5 smoothing. Give it a try and add me on Xbox if youíd like to pay

That's a lot of wins. Very impressive!! Let's play some time! Do you mind copying your xim config code here so I can paste into mine? Thanks!
sure we can play man add my gamer tag and shoot me a inv sometime. I may be appearing offline but shoot and inv and if Iím online Iíll join up. That goes for anyone.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: destined1ne on 08:07 AM - 01/11/19
Hello fellow ximers, my Xbox gamer tag is LVLoLLy....
I have 171 wins in blackout with a 5.5 kd and 20% win rate. 71 solo wins btw.
I use the vanilla st with sync off and a little smoothing but nothing else. No curves no boost no steady aim. These setting I rarely ever have problems with. I have basically tried every set up posted on the forums and find this one works the best.
70 hip and 35 ads, 5 smoothing. Give it a try and add me on Xbox if youíd like to pay

That's a lot of wins. Very impressive!! Let's play some time! Do you mind copying your xim config code here so I can paste into mine? Thanks!
sure we can play man add my gamer tag and shoot me a inv sometime. I may be appearing offline but shoot and inv and if Iím online Iíll join up. That goes for anyone.

Thanks for sharing. Still impressed by your win %! How do you win so much?!?!
Title: Re: BO4 My Advanced Setup (20181216)
Post by: TropicThunder on 07:55 PM - 01/11/19
You still have to be good at call of duty in general. The xim is not gonna turn you into a god lol. But I also have to say that not having your settings tuned right can definitely be a hindrance. Btw I changed hip to 80 ads to 40 smoothing 6 hip and ads
Title: Re: BO4 My Advanced Setup (20181216)
Post by: TropicThunder on 07:57 PM - 01/11/19
You could ideally keep the ads smoothing at 4. I just like my setting to match up.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: S60turbo on 10:22 PM - 01/11/19
Yeah 12k now as i brought a G502 and just thought i would start at max. Feels great to me.

Anyway i didnt want to hijack the thread was simply suggesting to someone that was struggling at distance that playing with boost might be their issue.

We're all individuals ofc.

That led to that getting poo pooed and a suggestion i cant win gunfights. Think ill dip out again, was just trying to help.
what is your hip, sync and ads? I also run 12k dpi but at 10 hip and 10 ads.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: TropicThunder on 11:18 PM - 01/11/19
Hello fellow ximers, my Xbox gamer tag is LVLoLLy....
I have 171 wins in blackout with a 5.5 kd and 20% win rate. 71 solo wins btw.
I use the vanilla st with sync off and a little smoothing but nothing else. No curves no boost no steady aim. These setting I rarely ever have problems with. I have basically tried every set up posted on the forums and find this one works the best.
70 hip and 35 ads, 5 smoothing. Give it a try and add me on Xbox if youíd like to pay

Updated settings:

>>> XIM APEX [BLACKOUT sync off] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

These are my best for now. Upped my wins to 180 and kd to 5.64 with these settings
Title: Re: BO4 My Advanced Setup (20181216)
Post by: TropicThunder on 11:20 PM - 01/11/19
Btw also changed xim response rate to 250 and left mouse polling at 1000
Title: Re: BO4 My Advanced Setup (20181216)
Post by: sjowiexo on 04:54 AM - 01/12/19
I use the exact settings as RML, but somehow I get no aim assist. The HIP and ADS are also very slow. I am using XIM Link, can this have anything to do with it?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: destined1ne on 05:34 AM - 01/12/19
I use the exact settings as RML, but somehow I get no aim assist. The HIP and ADS are also very slow. I am using XIM Link, can this have anything to do with it?

XIM link affects the sens. You need to adjust it accordingly.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: destined1ne on 05:35 AM - 01/12/19
Hello fellow ximers, my Xbox gamer tag is LVLoLLy....
I have 171 wins in blackout with a 5.5 kd and 20% win rate. 71 solo wins btw.
I use the vanilla st with sync off and a little smoothing but nothing else. No curves no boost no steady aim. These setting I rarely ever have problems with. I have basically tried every set up posted on the forums and find this one works the best.
70 hip and 35 ads, 5 smoothing. Give it a try and add me on Xbox if youíd like to pay

Updated settings:

>>> XIM APEX [BLACKOUT sync off] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

These are my best for now. Upped my wins to 180 and kd to 5.64 with these settings

I get an error when pasting this. What firmware/app version are you on? I'm on the latest beta.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: S13002931 on 07:00 AM - 01/12/19
I am sticking to RML's  setup.   I didn't need to change even hip or ads by  .5  !  It works best as it is.   N
Title: Re: BO4 My Advanced Setup (20181216)
Post by: sennsoph on 11:33 AM - 01/12/19

Hi there again.

Just wanted to say im really happy with the config. But for me personally I prefere to sync it with common sync. I dont know if its because my ps4 is pro, but it feels right for me. Get better results online with it turned on. I also tuned the smoothing and boosting a little bit to my own comfort. For the rest I use this config because the cool features you added like the parashooting and menus modes.

I dont know what it is with curves, most of the times I tested one i cant say it improves anything at all. Maybe it has to do with shooting at long range in blackout?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: TropicThunder on 01:21 PM - 01/12/19
Hello fellow ximers, my Xbox gamer tag is LVLoLLy....
I have 171 wins in blackout with a 5.5 kd and 20% win rate. 71 solo wins btw.
I use the vanilla st with sync off and a little smoothing but nothing else. No curves no boost no steady aim. These setting I rarely ever have problems with. I have basically tried every set up posted on the forums and find this one works the best.
70 hip and 35 ads, 5 smoothing. Give it a try and add me on Xbox if youíd like to pay

Updated settings:

>>> XIM APEX [BLACKOUT sync off] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

These are my best for now. Upped my wins to 180 and kd to 5.64 with these settings

I get an error when pasting this. What firmware/app version are you on? I'm on the latest beta.
Everything is the latest. Iíll post again




>>> XIM APEX [BLACKOUT sync default ] START COPY >>>
X5C:AAAAGgA1AC4AMAAwAC4AMgAwADEAOAAxADIAMAA0AAAALABCAEwAQQBDAEsATwBVAFQAIABzAHkAbgBjACAAZABlAGYAYQB1AGwAdAAgAAAFAQAAAAAAAAAABgBIAGkAcAEAAAAAAAABAAAAAAAAAAAAAAOEAGQAAWBAAAAAAAAAFAAAAAAAyAGQAlgDIAPoBLAFeAZABwgH0AiYCWAKKArwC7gMgA1IDhAO2A+gEGgRMBH4EsATiBRQFRgV4BaoF3AYOBkAGcgakBtYHCAc6B2wHngfQCAIINAhmCJgIygj8CS4JYAmSCcQYwRgEGCAYkAAAAAAAAAAAAAAAAAAAAECBAUAAB1MHUwUFEABQAJiCIBAYyCBAaAQYCBjCGMQgAGAAoAIgARiAYEQgQQAAAAAAAAAAEACAAAAAAAAgSAAAAAAoASgCGIgYYAAAAAAAAAAAAAAABwAQQBpAG0AIABEAG8AdwBuACAAUwBpAGcAaAB0AQFAAgABkAAAAAAAAAAAAAAAAcIAZAABAAAAAAAAAQAeAAAAAADIAZACWAMgA+gEsAV4BkAHCAfQCJgJYAooCvALuAyADUgOEA7YD6AQaBEwEfgSwBOIFFAVGBXgFqgXcBg4GQAZyBqQG1gcIBzoHbAeeB9AIAgg0CGYImAjKCPwJLglgCZIJxBjBGAQYIBiQAAAAAAAAAAAAAAAAAAAAQIEBQAAHUwdTBQUQAGgEIEBgEBrBEAQQAJACGsIa0CgBKAIayBrEIEggRCBBAAAAAAAAAAAAAAAAAAAAAAAAAAAa0CAAYACgAiABAAAAAAAAAAAAAAAEgBXAGkAbgBnACAAUwB1AGkAdAABYggBAAAAAAAAAAAAAAAAADawAGQAAGBAAAAAAAAAAAAAAAAAyAGQAlgDIAPoBLAFeAZABwgH0AiYCWAKKArwC7gMgA1IDhAO2A+gEGgRMBH4EsATiBRQFRgV4BaoF3AYOBkAGcgakBtYHCAc6B2wHngfQCAIINAhmCJgIygj8CS4JYAmSCcQYwRgEGCAYkAAAAAAAAAAAAAAAAAAAAECBAUAAB1MHUwUFEABoBCgBIBAawSBAUACQAhrCKAIQBCAAoAIgASBIIEQgQQAAAAAAAAAAKAQAAAAAAAAAAAAAGtAAAAAAAAAAAAAAAAAAAAAAAAAABIASQBuAHYAZQBuAHQAbwByAHkAAIEgAQAAAAAAQAgAAAAAAAAVfAAyAAEAAAAAAAEAAAAAAAAAAMgBkAJYAyAD6ASwBXgGQAcIB9AImAlgCigK8Au4DIANSA4QDtgPoBBoETAR+BLAE4gUUBUYFeAWqBdwGDgZABnIGpAbWBwgHOgdsB54H0AgCCDQIZgiYCMoI/AkuCWAJkgnEGMEYBBggGJAAAAAAAAAAAAAAAAAAAABAgQFAAAdTB1MFBRAAaAQoASAQGsEgQFAAkAIawigCEAQgAKACIAEgSCBEIEEAAAAAAAAAACgEAAAAAAAAAAAAABrQAAAAAAAAAAAAAAAAAAAAAAAAAAUAFEAdQBpAGMAawAgAE0AZQBuAHUAAEAQAQAAAAAAgEBACKAQAAADUgBkAAEAAAAAAAAAAAAAAAAAAMgBkAJYAyAD6ASwBXgGQAcIB9AImAlgCigK8Au4DIANSA4QDtgPoBBoETAR+BLAE4gUUBUYFeAWqBdwGDgZABnIGpAbWBwgHOgdsB54H0AgCCDQIZgiYCMoI/AkuCWAJkgnEGMEYBBggGJAAAAAAAAAAAAAAAAAAAABAgQFAAAdTB1MFBQAAKAQoASAQGsEgQEAAEAIawhrQEAQoAhAAkABgSCBEIEEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAUAEEAdQB4AGkAbABpAGEAcgB5ACAAAQAAAAAAAAAAAAAAAAAAAGwCowBkAAEAAAAAAAABAAABkAAAAMgBkAJYAyAD6ASwBXgGQAcIB9AImAlgCigK8Au4DIANSA4QDtgPoBBoETAR+BLAE4gUUBUYFeAWqBdwGDgZABnIGpAbWBwgHOgdsB54H0AgCCDQIZgiYCMoI/AkuCWAJkgnEGMEYBBggGJAAAAAAAAAAAAAAAAAAAABAgQFAAAdTB1MFBQAAKAQoASAQGsEQBAAAEAIawigCIEBoAhAAkABgSCBEIEEAAAAAAAAAACgEAAAAAAAAAAAAABrQAAAAAAAAAAAAAAAAAAAAAA=:X5C
<<< XIM APEX END COPY <<<
Title: Re: BO4 My Advanced Setup (20181216)
Post by: S60turbo on 10:29 AM - 01/14/19
Where should I have my MS delay at?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: kebab on 01:35 PM - 01/14/19
Hi,  thought it would give this load out a go,  had some luck with my own but it was always slightly jittery.

This seems very smooth,  I've had to increase hip to 95 and add to 65 and it still feels right

But... I can't work out the wing suit.  This has always been a bit of a problem but on my own build I have it sorted,  I can get pretty much right across the map.  I have done this with a 7x multiplier to the hip sensitivity.

However the turn assist option looks to what I was missing...  On the ground I activate the keys and it looks straight up,  point down and I look straight down.   But when I wingsuit I just glide forwards.   Any idea what I'm doing wrong?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: kebab on 03:42 PM - 01/14/19
Upped the hip sensitivity to 500 when toggled to wing suit and it works well.   Also seems OK for vehicles
Title: Re: BO4 My Advanced Setup (20181216)
Post by: sennsoph on 03:38 AM - 01/15/19
Yeah i had to turn it up too. You can do another one for driving if 500 is too much...
Title: Re: BO4 My Advanced Setup (20181216)
Post by: JDW182 on 04:36 AM - 01/15/19
I'm having trouble with the ADS delay, no matter what I do it always just seems a bit off. Especially on blackout when I sometimes have quickdraw, sometimes don't and also when i'm using snipers. If I set the ADS sens on the apex to 1 in the app but then change in game settings to 4x ADS speed, will I be able to have the delay set to 0?

Title: Re: BO4 My Advanced Setup (20181216)
Post by: Bann on 06:52 AM - 01/15/19
Im player of MP.  Please give me a config. With nice aim and comfort on action. My mouse max 6000dpi and i using keyboard. Please master.  Give me advice.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 10:18 AM - 01/15/19
Upped the hip sensitivity to 500 when toggled to wing suit and it works well.   Also seems OK for vehicles

You have to use Turn Assist with wing suit. This makes the same sensitivity really nice with vehicles.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Roronoa on 10:33 AM - 01/15/19
RML please come back the community needs you !!!
Title: Re: BO4 My Advanced Setup (20181216)
Post by: destined1ne on 12:09 PM - 01/15/19
RML please come back the community needs you !!!

Huh? He never left. In fact he just commented above.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Roronoa on 12:27 PM - 01/15/19
yes but on bo4 to fine tune its configuration :)
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Crosy on 01:37 PM - 01/15/19
Hey guys,

Anybody got any ideas how to use the mouse to loot in the new looting system they just added?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: destined1ne on 01:40 PM - 01/15/19
Hey guys,

Anybody got any ideas how to use the mouse to loot in the new looting system they just added?

Just use the arrow keys. I think mouse would be very slow/janky.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: kebab on 01:48 PM - 01/15/19
I'm going to try modding the quick equip option

Hold f
Then lmb for left
Rmb for right
Scroll up and down for up and down


Think it should work OK and not have to take your hand off the mouse
Title: Re: BO4 My Advanced Setup (20181216)
Post by: kebab on 05:06 PM - 01/15/19
Tried it and it works but it's not very intuitive.  I found it easier to let go of the mouse and use cursor keys.

Does seem like a improved system.  Just have to remember to swap to page 2....which needs a mouse wheel press  :'(
Title: Re: BO4 My Advanced Setup (20181216)
Post by: destined1ne on 07:52 PM - 01/15/19
Tried it and it works but it's not very intuitive.  I found it easier to let go of the mouse and use cursor keys.

Does seem like a improved system.  Just have to remember to swap to page 2....which needs a mouse wheel press  :'(

OMG the new loot system sucks! After you grab an item, you have to manually move over. It doesn't move everything over like in the old system. It's so much harder to loot now! Any solutions for this???
Title: Re: BO4 My Advanced Setup (20181216)
Post by: JDW182 on 01:44 AM - 01/16/19
What mouse do you have? I use the G502 and use the mouse scroll wheel to control the D-PAD. The fact the mouse wheel clicks left and right as extra inputs makes it super easy to navigate the menu. If you put your mouse middle click as your secondary bind for your pick up/reload key you basically do everything with one motion.
Tried it and it works but it's not very intuitive.  I found it easier to let go of the mouse and use cursor keys.

Does seem like a improved system.  Just have to remember to swap to page 2....which needs a mouse wheel press  :'(

OMG the new loot system sucks! After you grab an item, you have to manually move over. It doesn't move everything over like in the old system. It's so much harder to loot now! Any solutions for this???
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 04:28 AM - 01/16/19
For those of you sending me PMs for added help, I apologize, I wonít be gaming for another week and I havenít played this game in over a month.

Iím not the kind of guy that can stick to just ONE game and I typically burn myself out in about a months time with all the testing and crap I do.

Iíll be back at it soon and probably updating my settings before the end of the month.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Roronoa on 06:45 AM - 01/16/19
good new RML we look forward to you !!! :)
Title: Re: BO4 My Advanced Setup (20181216)
Post by: destined1ne on 08:42 AM - 01/16/19
Hello fellow ximers, my Xbox gamer tag is LVLoLLy....
I have 171 wins in blackout with a 5.5 kd and 20% win rate. 71 solo wins btw.
I use the vanilla st with sync off and a little smoothing but nothing else. No curves no boost no steady aim. These setting I rarely ever have problems with. I have basically tried every set up posted on the forums and find this one works the best.
70 hip and 35 ads, 5 smoothing. Give it a try and add me on Xbox if youíd like to pay

Updated settings:

>>> XIM APEX [BLACKOUT sync off] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

These are my best for now. Upped my wins to 180 and kd to 5.64 with these settings

I get an error when pasting this. What firmware/app version are you on? I'm on the latest beta.
Everything is the latest. Iíll post again




>>> XIM APEX [BLACKOUT sync default ] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

I'm still getting "Error" when pasting this. Has anyone had luck pasting this into the config?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: JDW182 on 11:49 AM - 01/16/19
When I try paste RMLís code on iPhone it says Ďerrorí does anyone else get this? Iím on the most up to date version of the XIM app.
Iím trying to paste this:
>>> XIM APEX [BLACKOUT ] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Dirty Ces on 02:50 PM - 01/16/19
where does RML have the ads delay set at ?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 03:11 PM - 01/16/19
When I try paste RMLís code on iPhone it says Ďerrorí does anyone else get this? Iím on the most up to date version of the XIM app.
Iím trying to paste this:
>>> XIM APEX [BLACKOUT ] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

You need the beta firmware and manager that I mentioned in the OP.

https://community.xim.tech/index.php?topic=73173.0

My ADS delay is 400... which is also mentioned in the OP.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: InZaneHD on 03:24 PM - 01/16/19
What setup are you guys using for the new looting system?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: destined1ne on 03:28 PM - 01/16/19
What setup are you guys using for the new looting system?

Looking for a good looting system as well.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Figga on 04:33 PM - 01/16/19
If you have a G502 like me, Iím using the mouse scroll with the push in button set to X. Works a treat:)
Title: Re: BO4 My Advanced Setup (20181216)
Post by: InZaneHD on 04:44 PM - 01/16/19
If you have a G502 like me, Iím using the mouse scroll with the push in button set to X. Works a treat:)

I use the g502, using scroll up/down sideways and back and forward to up and down but i feel that its weird
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Tetsurobash on 04:03 PM - 01/19/19
Upped the hip sensitivity to 500 when toggled to wing suit and it works well.   Also seems OK for vehicles

You have to use Turn Assist with wing suit. This makes the same sensitivity really nice with vehicles.

Or you can under the ďmovementĒ section is bind wasd or D pad to the right stick then bind ďleft clickĒ to (up) and ďright clickĒ to (down) on the opposite. Try not to move the mouse when diving down for speed and back up. It will interrupt the (wasd)inputs being used to pitch and down and cause brief pauses and delay the process of building speed for long distance drops. This also works great with vehicles... because it puts the gas and brake on the left and right click.

This setup letís you control direction with mouse and/or keys and puts speed control at the fingertips
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Figga on 12:04 AM - 01/20/19
If you have a G502 like me, Iím using the mouse scroll with the push in button set to X. Works a treat:)

I use the g502, using scroll up/down sideways and back and forward to up and down but i feel that its weird

I have since changed a little bit, I use another auxiliary with mouse wheel up and down and then left mouse for L and Right mouse for R, took a little getting use to but now it's spot on:) Helps because ive started using a Nav controller (which is amazing). especially for fixing armor on the move.   
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Dirty Ces on 10:55 AM - 01/20/19
When I try paste RMLís code on iPhone it says Ďerrorí does anyone else get this? Iím on the most up to date version of the XIM app.
Iím trying to paste this:
>>> XIM APEX [BLACKOUT ] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

You need the beta firmware and manager that I mentioned in the OP.

https://community.xim.tech/index.php?topic=73173.0

My ADS delay is 400... which is also mentioned in the OP.

Canít believe I missed it, thanks,,,,,, Quick question why 400 instead of the default ?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: InZaneHD on 12:36 PM - 01/20/19
I found a decent new looting setup. The only negative thing is that u cant move while looting. I created a new AUX and binded my back button on (G502) hold to activate the aux. Then using wasd to navigate the lootbag F/G as LB/RB and R as X (square on PS4)

Remember to uncheck inherit so you have a different key setup while in "loot mode"
I can share screenshots or my config if anyones interested. Using RMLs setup whit a few tweaks.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: d1sable on 03:30 PM - 01/20/19
If u wouldnt mind sharing th aux page set up that would be great. Not played blackout since new looting system so will just copy urs if thats ok as sounds good to me.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Figga on 01:37 AM - 01/21/19
If u wouldnt mind sharing th aux page set up that would be great. Not played blackout since new looting system so will just copy urs if thats ok as sounds good to me.

I use a G502 and I start new Aux, I bind the thumb button on mouse to activate Aux(hold), then use up and down on scroll wheel for up and down and then bind Left mouse button and right mouse button for left and right. Keep X as normal, match sensitivity from hip so your looks mechanics are the same. I can now repair armor and reorganisation my quick inventory while Iím moving and looking around:) Will only take a few games to get the hang of:) I use Nav controller and now I donít have to take my thumb off the left stick:)
Title: Re: BO4 My Advanced Setup (20181216)
Post by: d1sable on 04:21 AM - 01/21/19
Ty
Title: Re: BO4 My Advanced Setup (20181216)
Post by: lilnagle on 05:28 PM - 01/21/19
once i copy the ST from computer, i sent it to my email, copied it from there on my mobile...opened up xim app and now i dont know what to do with it...i still have the original xim 4 not the new apex.........this is my first time every copying something so im lost lol.....

Per requests, here's my current setup for BO4.

I personally like utilizing Aim Assist (AA) as I believe it gives me an advantage. Why? Because when utilizing AA I can out maneuver and out aim "most" of my opponents that can't move and turn as fast as I can and maintain a high degree of accuracy. I can do this because I can play at higher sensitivity's then a controller player and still be accurate with my shots thanks to the slow down effects of AA. With a little practice XIM can easily put you into the "Elite" class of controller players. The biggest problem with AA is it can be a little over powering for a device as precise as a mouse. For more on that, please see the link in my signature titled "Anti Aim Assist curve set for any FPS game".

PLEASE NOTE: I'm currently getting away from any AA curves with APEX. APEX polling at 1000hz combined with SYNC OFF, 12000 DPI and some added boost cuts through AA nicely.

If you're newer to XIM and you don't know me and you're wondering if this setup may apply to you. Here's a little background on me and my setup.

"I use 12000 dpi because it helps over come AA a little. I use SYNC OFF, because it helps over come AA a little, I use 1000hz. because it helps over come AA a little. Then I use Boost to do the rest. The objective would be to use as little Boost as possible because its the only one of these that will have a negative impact on Linear movement. I've taken all of these things into account, and came up with the settings I've shared. The goal being to make Aim Assist feel more manageable without degrading linear and micro movements to noticeably.

Morale of the story... The more you lower DPI, Polling, SYNC settings and Sensitivity, the more you have to compensate with curves and boost if Aim Assist is too strong for you. I understand wanting to use lower DPI, I honestly Used to be "That Guy!" Od1n and myself were probably the biggest "known members" here that have spoken this way. I swore on 4000 dpi! That was my thing with my Destiny Setup. 4000 DPI, that's because I grew up with it. 12000 dpi felt jittery to me.

Then APEX came along. As an Alpha tester I was committed to test and trial running at 1000hz. At first this felt pretty Jittery to me and I had some real concerns about the quality of performance. But after about a week of playing at 1000hz. and after I realized how much better Aim Assist felt to me while playing at 1000hz. I was completely sold that this is the future of XIM! It takes performance up a few notches, it's more responsive, it cuts through AA better!

Then HE4DHUNTER convinced me to do something I swore I NEVER would do, convert to 12000 DPI. Again, at first this felt jittery to me as much or more so then 1000hz. But I learned to dial in my sensitivity with these new settings and my G502. I learned to steady my hand a little. Now, I won't stray from 12000 DPI either.

(If you don't know who HE4DHUNTER is, watch any of the Admin videos advertising a XIM product since EDGE, if it's COD, then it's HH behind the mouse. The guy is the best XIM COD player on the planet, period!)

My point is. I do these things for a reason. It made sense to me to alter my style and switch to 12000 dpi because I liked how it made AA feel for me when compared to lower DPI settings.

Aim Assist has always been my one and only Nemesis ever since I bought my first XIM and it seems to be just getting stronger with most games. So what you see in my setup is quite literally an evolution of my gaming style over the last 5 years (maybe more)! But it was a necessity for me personally. In order to make AA work for me, to my expectations and still keep linear movement as crisp and clean as possible. This setup is what I had to do.

That being said, everyone is different. This is the story behind my setup. If you asked "what could I do to match your settings?" I don't know how to fully explain that to you without sharing my journey. So sorry for the long winded, ba,blah,ba blah. But that's my answer.

Cheers!"   - RML



THEORY BEHIND THIS SETUP:
- High DPI helps cut through AA (Aim Assist).
- 1000hz helps cut through AA.
- SYNC OFF helps cut through AA.
- Higher Sensitivity helps cut through AA.
- Boost helps cut through AA.
- Smoothing increases AA.



HOW TO APPLY THIS CONCEPT TO YOUR GAME:
- Use your mouses Max DPI setting.
- Activate Advanced settings in XIM Manager.
- Use 1000hz in XIM Manager and 1000 polling on your mouse. (if your mouse doesn't poll at 1000hz consistently and you're feeling Stutter, then run XIM manager at 500hz. This will make AA slightly stronger but fix the stutter. If you're unsure if it's your mouse's polling rate, then add Smoothing and see if it fixes the issue. You should add Smoothing in increments of 1 until stutter is gone. You want to keep Smoothing as low as possible as it will also make AA stronger).
- Change your Sync setting from DEFAULT to SYNC OFF, in manager.
- Adjust your Hip sensitivity in game until you feel comfortable. Adjust your ADS sensitivity the same, but maybe push it a little toward the fast side. Remember higher sens = less AA and raising your ADS sensitivity is the Purest way of eliminating AA. So push it but make sure it's controllable, I suggest you test it on bots in a private game to get the feel for how AA is effecting your aim.
- While testing your aim in a private match, Adjust boost in increments of 100 until AA feels manageable to you. You can then fine tune in smaller increments if you'd like, I'd suggest 25 minimum.

If needed, I suggest the following for applying Smoothing to your setup.
- MUTIPLAYER: 0-4
- BLACKOUT: 4-8

If needed, I suggest the following for applying Boost to your setup.
- BLACKOUT: 0-400 (Going above 400 in Blackout may make long range sniping difficult).
- MULTIPLAYER: 0-1000 (All depends on how much AA you like, if you go above 1000 though aiming gets to responsive IMO).


Got it? Good! On to the setup...

Here's my Full Setup
Beta Firmware/Manager, Link - https://community.xim.tech/index.php?topic=73173.0
In game sensitivity should be maxed at Insane 14
Ads 1x
High Zoom .75x

Aim Assist in game should be [ON]
12000 DPI - http://www.csgosetup.com/dpi-calculator/
G502 Polling is set to 1000
BO4 ST
XIM APEX Polling - 1000
Sync Off
ADS Delay 400ms


FULL CONFIG (Sync Off) - I'm a NAV user, so you'll have to assign buttons to your liking. This "Full Config Code" is for APEX ONLY!
Code: [Select]
   >>> XIM APEX [BLACKOUT ] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<< 


If the settings above don't work for you then you can try an Anti Aim Assist curve. If you're going to use any of these curves I suggest you first remove any Boost from your settings. Here's a full configuration code. This is an Alpha Stencil ST and not meant for use with ANY particular game. This Configs only purpose is to act as a storage area for AAA curves. Every sub within this config has a AAA curve in it. Every AAA curve I currently recommend is within this config. Just copy/paste the curve from this config into your own.

Anti Aim Assist Curves Storage Config.
Code: [Select]
  >>> XIM APEX [Anti Aim Assist Curves] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

Here's my G502 button mapping (cause several have asked).
(https://i.imgur.com/7nofMHZ.jpg)


CHEERS!
Title: Re: BO4 My Advanced Setup (20181216)
Post by: S13002931 on 03:11 AM - 01/22/19
This config is for Xim Apex.   NOT FOR XIM4.

So,  bye bye !    Did u see Xim4   mentioned any where in 1st post  of this topic ??

Xim Apex config isnt compatible with Xim4.   
Title: Re: BO4 My Advanced Setup (20181216)
Post by: RML on 07:11 AM - 01/22/19

Xim Apex config isnt compatible with Xim4.

This is True and Xim4 settings would be vastly different then my settings.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Phoenix10 on 07:17 AM - 01/22/19
RML i know you quit the game
But its possible please to make as new settings for blackout, that you will use default sync

I will love this
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Dirty Ces on 07:44 AM - 01/22/19
RML,

What are your feelings about Simulate Analog with this game ?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: jeffpaw96 on 09:03 PM - 01/23/19
RML,

What are your feelings about Simulate Analog with this game ?

I've asked this before and he doesn't use it because he has SONY NAV and not a keyboard.

SAB was added to circumvent fortnite players being kicked for digital keyboard input. SAB will worsen strafing momentum changes with SMGs or guns with stock attachment and thus you will be easier to track by opponents. Also, because aim assist is affected by left stick movement you may feel more "stuck in the mud" aim assist feel because the studen velocity changes with instant keyboard input help to break through the aim assist bubble.

However, it may increase the consistency of aim assist in fights because the game was developed for analog movement, but this comes with increased aim assist. So if you wish to experiment with MORE aim assist (Note that all RML setups strive for the opposite); you could give it a shot.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Dirty Ces on 12:02 PM - 01/24/19
RML,

What are your feelings about Simulate Analog with this game ?

I've asked this before and he doesn't use it because he has SONY NAV and not a keyboard.

SAB was added to circumvent fortnite players being kicked for digital keyboard input. SAB will worsen strafing momentum changes with SMGs or guns with stock attachment and thus you will be easier to track by opponents. Also, because aim assist is affected by left stick movement you may feel more "stuck in the mud" aim assist feel because the studen velocity changes with instant keyboard input help to break through the aim assist bubble.

However, it may increase the consistency of aim assist in fights because the game was developed for analog movement, but this comes with increased aim assist. So if you wish to experiment with MORE aim assist (Note that all RML setups strive for the opposite); you could give it a shot.

BRO ! Thanks a lot for this response very informative. I never got an answer for this one lets see if you or RML or anyone else has an answer.

Why does RML have his ADS DELAY at 400 and not at the default 224 ? I want to try 400 but I don't know the reasoning behind it. Thanks in advance
Title: Re: BO4 My Advanced Setup (20181216)
Post by: jeffpaw96 on 01:51 PM - 01/24/19
RML,

What are your feelings about Simulate Analog with this game ?

I've asked this before and he doesn't use it because he has SONY NAV and not a keyboard.

SAB was added to circumvent fortnite players being kicked for digital keyboard input. SAB will worsen strafing momentum changes with SMGs or guns with stock attachment and thus you will be easier to track by opponents. Also, because aim assist is affected by left stick movement you may feel more "stuck in the mud" aim assist feel because the studen velocity changes with instant keyboard input help to break through the aim assist bubble.

However, it may increase the consistency of aim assist in fights because the game was developed for analog movement, but this comes with increased aim assist. So if you wish to experiment with MORE aim assist (Note that all RML setups strive for the opposite); you could give it a shot.

BRO ! Thanks a lot for this response very informative. I never got an answer for this one lets see if you or RML or anyone else has an answer.

Why does RML have his ADS DELAY at 400 and not at the default 224 ? I want to try 400 but I don't know the reasoning behind it. Thanks in advance

Because 400ms is long enough to cover your aim transition for ALL guns in the game. Also note you should have smooth aim transition OFF because treyarch patched this into the game recently.

Let me give you an example; the spitfire ADS time is 250ms with no attachments. So what this means is in the crucial milliseconds of target acquisition, your aim is only smoothed over 224ms and the ADS translator is activated 26ms too early (almost 2 frames in game), and as a result you will experience aim slowdown because your character is not yet actually looking down the sight. This results in aim transition that is out of sync. However, having a value higher than the scope in time for the gun is fine because cod smooths out the transition between hip and ADS over the entire period of time you are acquiring a target; thus no sudden changes in movement speed unlike a lower ADS delay setting.

Technically, the best value is different for each gun, but it would be a pain to create a separate xim profile for every weapon in the game. If you only have a select few guns you ever run, you could match the value exactly by finding ADS times in theXclusiveAce's gun guides on youtube; note that there is a DIFFERENT value between using quickdraw and no quickdraw. Otherwise just use 400ms for the overall best experience for all guns.
Title: Re: BO4 My Advanced Setup (20181216)
Post by: Dirty Ces on 02:00 PM - 01/24/19
RML,

What are your feelings about Simulate Analog with this game ?

I've asked this before and he doesn't use it because he has SONY NAV and not a keyboard.

SAB was added to circumvent fortnite players being kicked for digital keyboard input. SAB will worsen strafing momentum changes with SMGs or guns with stock attachment and thus you will be easier to track by opponents. Also, because aim assist is affected by left stick movement you may feel more "stuck in the mud" aim assist feel because the studen velocity changes with instant keyboard input help to break through the aim assist bubble.

However, it may increase the consistency of aim assist in fights because the game was developed for analog movement, but this comes with increased aim assist. So if you wish to experiment with MORE aim assist (Note that all RML setups strive for the opposite); you could give it a shot.

BRO ! Thanks a lot for this response very informative. I never got an answer for this one lets see if you or RML or anyone else has an answer.

Why does RML have his ADS DELAY at 400 and not at the default 224 ? I want to try 400 but I don't know the reasoning behind it. Thanks in advance

Because 400ms is long enough to cover your aim transition for ALL guns in the game. Also note you should have smooth aim transition OFF because treyarch patched this into the game recently.

Let me give you an example; the spitfire ADS time is 250ms with no attachments. So what this means is in the crucial milliseconds of target acquisition, your aim is only smoothed over 224ms and the ADS translator is activated 26ms too early (almost 2 frames in game), and as a result you will experience aim slowdown because your character is not yet actually looking down the sight. This results in aim transition that is out of sync. However, having a value higher than the scope in time for the gun is fine because cod smooths out the transition between hip and ADS over the entire period of time you are acquiring a target; thus no sudden changes in movement speed unlike a lower ADS delay setting.

Technically, the best value is different for each gun, but it would be a pain to create a separate xim profile for every weapon in the game. If you only have a select few guns you ever run, you could match the value exactly by finding ADS times in theXclusiveAce's gun guides on youtube; note that there is a DIFFERENT value between using quickdraw and no quickdraw. Otherwise just use 400ms for the overall best experience for all guns.

Thanks again , Really appreciate the time taking to typing this reply. Very helpful. Thanks man. I'll try 400 tonight and I'll make sure I have smooth aim off,
Title: Re: BO4: Advanced Setup (20181216)
Post by: InZaneHD on 07:41 PM - 01/24/19
I have asked this before but still have some "problems" regarding ads delay
Im using toggle ads (toggle checkpoint) and 400ms delay is making my gun ads twice before full ads if u know what i mean.. Should i use about 70ms since thats about where the gun dont double ads?
Title: Re: BO4: Advanced Setup (20181216)
Post by: sjowiexo on 04:55 AM - 01/25/19
Does anyone use these settings with XIM Link and has an active AA? I somehow can't get it to work. Works fine without Link
Title: Re: BO4: Advanced Setup (20181216)
Post by: RML on 10:01 AM - 01/25/19
I have asked this before but still have some "problems" regarding ads delay
Im using toggle ads (toggle checkpoint) and 400ms delay is making my gun ads twice before full ads if u know what i mean.. Should i use about 70ms since thats about where the gun dont double ads?

The 20181204 firmware and manager was updated recently and it shouldíve fixed the issue (although I havenít been able to test yet). Youíll have to factory reset to download it though as itís still under the same identity.
Title: Re: BO4: Advanced Setup (20181216)
Post by: Omarf826 on 07:26 PM - 01/25/19
I have asked this before but still have some "problems" regarding ads delay
Im using toggle ads (toggle checkpoint) and 400ms delay is making my gun ads twice before full ads if u know what i mean.. Should i use about 70ms since thats about where the gun dont double ads?

The 20181204 firmware and manager was updated recently and it shouldíve fixed the issue (although I havenít been able to test yet). Youíll have to factory reset to download it though as itís still under the same identity.

Wait... , so i i have been using the old 204  version from the getgo the whole time??!  :-[ 

And now theres a renewed version of 204, if i understood correctly??  If thats the case no wonder why my aiming has been wonky lately :O . How do we factory reset, and go about this issue?
Title: Re: BO4: Advanced Setup (20181216)
Post by: jeffpaw96 on 02:19 PM - 01/26/19
I have asked this before but still have some "problems" regarding ads delay
Im using toggle ads (toggle checkpoint) and 400ms delay is making my gun ads twice before full ads if u know what i mean.. Should i use about 70ms since thats about where the gun dont double ads?

The 20181204 firmware and manager was updated recently and it shouldíve fixed the issue (although I havenít been able to test yet). Youíll have to factory reset to download it though as itís still under the same identity.

Wait... , so i i have been using the old 204  version from the getgo the whole time??!  :-[ 

And now theres a renewed version of 204, if i understood correctly??  If thats the case no wonder why my aiming has been wonky lately :O . How do we factory reset, and go about this issue?
Download the latest firmware and just press the factory reset button and it will both update you and wipe your xim. Dont use the update firmware button.
Title: Re: BO4: Advanced Setup (20181216)
Post by: InZaneHD on 02:37 PM - 01/26/19
Will this wipe all my game configs?
Title: Re: BO4: Advanced Setup (20181216)
Post by: Omarf826 on 03:53 PM - 01/26/19
I have asked this before but still have some "problems" regarding ads delay
Im using toggle ads (toggle checkpoint) and 400ms delay is making my gun ads twice before full ads if u know what i mean.. Should i use about 70ms since thats about where the gun dont double ads?

The 20181204 firmware and manager was updated recently and it shouldíve fixed the issue (although I havenít been able to test yet). Youíll have to factory reset to download it though as itís still under the same identity.

Wait... , so i i have been using the old 204  version from the getgo the whole time??!  :-[ 

And now theres a renewed version of 204, if i understood correctly??  If thats the case no wonder why my aiming has been wonky lately :O . How do we factory reset, and go about this issue?
Download the latest firmware and just press the factory reset button and it will both update you and wipe your xim. Dont use the update firmware button.

The latest firmware is 20190119??? Or download 204 again then do the factory reset?? Im a bit confused here
Title: Re: BO4 My Advanced Setup (20181216)
Post by: istainville on 05:41 PM - 01/26/19
Hello fellow ximers, my Xbox gamer tag is LVLoLLy....
I have 171 wins in blackout with a 5.5 kd and 20% win rate. 71 solo wins btw.
I use the vanilla st with sync off and a little smoothing but nothing else. No curves no boost no steady aim. These setting I rarely ever have problems with. I have basically tried every set up posted on the forums and find this one works the best.
70 hip and 35 ads, 5 smoothing. Give it a try and add me on Xbox if youíd like to pay

Updated settings:

>>> XIM APEX [BLACKOUT sync off] START COPY >>>
X5C:AAAAGgA1AC4AMAAwAC4AMgAwADEAOAAxADIAMAA0AAAAIgBCAEwAQQBDAEsATwBVAFQAIABzAHkAbgBjACAAbwBmAGYAAAUBAAAAAAAAAAAGAEgAaQBwAQAAAAAAAAEAAAAAAAAAAAAAA4QAZAABYEAAAAAAAAAUAAAAAADIAZACWAMgA+gEsAV4BkAHCAfQCJgJYAooCvALuAyADUgOEA7YD6AQaBEwEfgSwBOIFFAVGBXgFqgXcBg4GQAZyBqQG1gcIBzoHbAeeB9AIAgg0CGYImAjKCPwJLglgCZIJxBjBGAQYIBiQAAAAAAAAAAAAAAAAAAAAQIEBQAAHUwdTBQUQAFAAmIIgEBjIIEBoBBgIGMIYxCAAYACgAiABGIBgRCBBAAAAAAAAAAAQAIAAAAAAACBIAAAAACgBKAIYiBhgAAAAAAAAAAAAAAAHABBAGkAbQAgAEQAbwB3AG4AIABTAGkAZwBoAHQBAUACAAGQAAAAAAAAAAAAAAABwgBkAAEAAAAAAAABAB4AAAAAAMgBkAJYAyAD6ASwBXgGQAcIB9AImAlgCigK8Au4DIANSA4QDtgPoBBoETAR+BLAE4gUUBUYFeAWqBdwGDgZABnIGpAbWBwgHOgdsB54H0AgCCDQIZgiYCMoI/AkuCWAJkgnEGMEYBBggGJAAAAAAAAAAAAAAAAAAAABAgQFAAAdTB1MFBRAAaAQgQGAQGsEQBBAAkAIawhrQKAEoAhrIGsQgSCBEIEEAAAAAAAAAAAAAAAAAAAAAAAAAABrQIABgAKACIAEAAAAAAAAAAAAAAASAFcAaQBuAGcAIABTAHUAaQB0AAFiCAEAAAAAAAAAAAAAAAAANrAAZAAAYEAAAAAAAAAAAAAAAADIAZACWAMgA+gEsAV4BkAHCAfQCJgJYAooCvALuAyADUgOEA7YD6AQaBEwEfgSwBOIFFAVGBXgFqgXcBg4GQAZyBqQG1gcIBzoHbAeeB9AIAgg0CGYImAjKCPwJLglgCZIJxBjBGAQYIBiQAAAAAAAAAAAAAAAAAAAAQIEBQAAHUwdTBQUQAGgEKAEgEBrBIEBQAJACGsIoAhAEIACgAiABIEggRCBBAAAAAAAAAAAoBAAAAAAAAAAAAAAa0AAAAAAAAAAAAAAAAAAAAAAAAAAEgBJAG4AdgBlAG4AdABvAHIAeQAAgSABAAAAAABACAAAAAAAABV8ADIAAQAAAAAAAQAAAAAAAAAAyAGQAlgDIAPoBLAFeAZABwgH0AiYCWAKKArwC7gMgA1IDhAO2A+gEGgRMBH4EsATiBRQFRgV4BaoF3AYOBkAGcgakBtYHCAc6B2wHngfQCAIINAhmCJgIygj8CS4JYAmSCcQYwRgEGCAYkAAAAAAAAAAAAAAAAAAAAECBAUAAB1MHUwUFEABoBCgBIBAawSBAUACQAhrCKAIQBCAAoAIgASBIIEQgQQAAAAAAAAAAKAQAAAAAAAAAAAAAGtAAAAAAAAAAAAAAAAAAAAAAAAAABQAUQB1AGkAYwBrACAATQBlAG4AdQAAQBABAAAAAACAQEAIoBAAAANSAGQAAQAAAAAAAAAAAAAAAAAAyAGQAlgDIAPoBLAFeAZABwgH0AiYCWAKKArwC7gMgA1IDhAO2A+gEGgRMBH4EsATiBRQFRgV4BaoF3AYOBkAGcgakBtYHCAc6B2wHngfQCAIINAhmCJgIygj8CS4JYAmSCcQYwRgEGCAYkAAAAAAAAAAAAAAAAAAAAECBAUAAB1MHUwUFAAAoBCgBIBAawSBAQAAQAhrCGtAQBCgCEACQAGBIIEQgQQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAABQAQQB1AHgAaQBsAGkAYQByAHkAIAABAAAAAAAAAAAAAAAAAAAAbAKjAGQAAQAAAAAAAAEAAAGQAAAAyAGQAlgDIAPoBLAFeAZABwgH0AiYCWAKKArwC7gMgA1IDhAO2A+gEGgRMBH4EsATiBRQFRgV4BaoF3AYOBkAGcgakBtYHCAc6B2wHngfQCAIINAhmCJgIygj8CS4JYAmSCcQYwRgEGCAYkAAAAAAAAAAAAAAAAAAAAECBAUAAB1MHUwUFAAAoBCgBIBAawRAEAAAQAhrCKAIgQGgCEACQAGBIIEQgQQAAAAAAAAAAKAQAAAAAAAAAAAAAGtAAAAAAAAAAAAAAAAAAAAAAA==:X5C
<<< XIM APEX END COPY <<<

These are my best for now. Upped my wins to 180 and kd to 5.64 with these settings

I get an error when pasting this. What firmware/app version are you on? I'm on the latest beta.
Everything is the latest. Iíll post again




>>> XIM APEX [BLACKOUT sync default ] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

Any recent updates or modifications within the current/most recent beta? Thanks!
Title: Re: BO4: Advanced Setup (20181216)
Post by: InZaneHD on 01:32 PM - 01/27/19
Is it possible to make an "sniper/scoped" aux that activates when holding breath button for a sec or something? So i can get rid of the boost while ads. Same button is also sprint so is it possible to make it only activate when holding it for a second or more?
Title: Re: BO4: Advanced Setup (20181216)
Post by: Phoenix10 on 02:34 AM - 01/28/19
I have asked this before but still have some "problems" regarding ads delay
Im using toggle ads (toggle checkpoint) and 400ms delay is making my gun ads twice before full ads if u know what i mean.. Should i use about 70ms since thats about where the gun dont double ads?

The 20181204 firmware and manager was updated recently and it shouldíve fixed the issue (although I havenít been able to test yet). Youíll have to factory reset to download it though as itís still under the same identity.

Hey RML can you please update the set up
can you please make a new config
with the new firmware features ???
Title: Re: BO4: Advanced Setup (20181216)
Post by: Roronoa on 09:17 AM - 01/28/19
when did this config the features already existed. he does not use steady aim, for sab rml plays with the nav, so he does not use it.
Title: Re: BO4: Advanced Setup (20181216)
Post by: Roronoa on 09:18 AM - 01/28/19
when did this config the features already existed. he does not use steady aim, for sab rml plays with the nav, so he does not use it.
Title: Re: BO4: Advanced Setup (20181216)
Post by: Phoenix10 on 05:29 AM - 01/29/19
Yeap but i cant copy it
He needs to update it to the new firmware
Title: Re: BO4: Advanced Setup (20181216)
Post by: puinsai on 10:08 AM - 01/29/19
Yeap but i cant copy it
He needs to update it to the new firmware
That is the rml setup for blackout + personal setting for the new firmware
Code: [Select]
>>> XIM APEX [12k BLACKOUT (sync off)] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<
Title: Re: BO4: Advanced Setup (20181216)
Post by: Phoenix10 on 03:15 PM - 01/29/19
Thanks man
Title: Re: BO4: Advanced Setup (20181216)
Post by: MGT Gaming on 10:51 PM - 01/31/19
Is there a way to make it so when I hold my Wing suit config and hold free look it just keeps spinning in circles?
Title: Re: BO4: Advanced Setup (20181216)
Post by: destined1ne on 08:16 AM - 02/01/19
Is there a way to make it so when I hold my Wing suit config and hold free look it just keeps spinning in circles?

why would you want to keep spinning in circles?
Title: Re: BO4: Advanced Setup (20181216)
Post by: MGT Gaming on 01:11 AM - 02/02/19
Sorry i worded it wrong, the problem im having is that I just keep spinning and i dont want to
Title: Re: BO4 My Advanced Setup (20181216)
Post by: MGT Gaming on 05:21 AM - 02/02/19
Hello fellow ximers, my Xbox gamer tag is LVLoLLy....
I have 171 wins in blackout with a 5.5 kd and 20% win rate. 71 solo wins btw.
I use the vanilla st with sync off and a little smoothing but nothing else. No curves no boost no steady aim. These setting I rarely ever have problems with. I have basically tried every set up posted on the forums and find this one works the best.
70 hip and 35 ads, 5 smoothing. Give it a try and add me on Xbox if youíd like to pay

Updated settings:

>>> XIM APEX [BLACKOUT sync off] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

These are my best for now. Upped my wins to 180 and kd to 5.64 with these settings
\
Any updates?
Title: Re: BO4 My Advanced Setup (20181216)
Post by: lilnagle on 01:53 PM - 02/02/19
Hello fellow ximers, my Xbox gamer tag is LVLoLLy....
I have 171 wins in blackout with a 5.5 kd and 20% win rate. 71 solo wins btw.
I use the vanilla st with sync off and a little smoothing but nothing else. No curves no boost no steady aim. These setting I rarely ever have problems with. I have basically tried every set up posted on the forums and find this one works the best.
70 hip and 35 ads, 5 smoothing. Give it a try and add me on Xbox if youíd like to pay

what mouse and dpi etc...
Title: Re: BO4: Advanced Setup (20181216)
Post by: Phoenix10 on 02:01 AM - 02/04/19
Yeap but i cant copy it
He needs to update it to the new firmware
That is the rml setup for blackout + personal setting for the new firmware
Code: [Select]
>>> XIM APEX [12k BLACKOUT (sync off)] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

Hey man do you remember what was the original values for hip fire and ads??
Something its not feel right with the set up
Title: Re: BO4: Advanced Setup (20181216)
Post by: puinsai on 09:02 AM - 02/04/19
Yeap but i cant copy it
He needs to update it to the new firmware
That is the rml setup for blackout + personal setting for the new firmware
Code: [Select]
>>> XIM APEX [12k BLACKOUT (sync off)] START COPY >>>
X5C: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:X5C
<<< XIM APEX END COPY <<<

Hey man do you remember what was the original values for hip fire and ads??
Something its not feel right with the set up

Sync off -12k dpi 1000Hz

***Multiplayer***

Hip - 58
Smoothing 3

ADS - 50, Boost 600
Delay - 400
Smoothing 3

***Blackout***

High Zoom .75

Hip - 58
Smoothing 3

ADS - 48, Boost 300
Delay - 400
Smoothing 5
Title: Re: BO4: Advanced Setup (20181216)
Post by: Mikehinkle90 on 01:12 PM - 02/04/19
I swapped to this config. I'm using the logitech g502 hero. I'm on the same exact settings as the post and I am also using a nav. 50 ads was so fast I couldn't even get on target. I copied and pasted the ops config. I cant sort out what I did wrong? 58 hip was fine but the ads was insane.
Title: Re: BO4: Advanced Setup (20181216)
Post by: Phoenix10 on 04:33 AM - 02/05/19