XIM Community

XIM APEX => XIM APEX Discussions => Topic started by: PegasusActual on 04:38 AM - 03/09/18

Title: XIM4 to XIM APEX Ballistics Converter
Post by: PegasusActual on 04:38 AM - 03/09/18
https://ximconvert.000webhostapp.com/curve.php

Example usage:
(https://i.imgur.com/fMhPUt4.png) (https://ximconvert.000webhostapp.com/curve.php)

Example result (XIM4 input on left, converted Apex curve on right):
(https://i.imgur.com/nRNuSgQ.png)

Keep in mind that it's not possible to perfectly convert curves as XIM Apex uses incompatible intervals on the X axis (steps of 2% vs steps of 5%). That means that many values are interpolated and can be slightly off compared where they would be on XIM4. But I think it will work well for most curves or at the very least give a starting point for recreating curves.

Also keep in mind that I'm using free webhosting, so it may go down outside of my control and that it's not that well tested so if it doesn't work when it should, let me know and I will try to fix it.
Title: Re: XIM4 to XIM Apex Ballistics Converter
Post by: Epic_Gamer on 08:02 AM - 03/09/18
Thanks for this:-)
Title: Re: XIM4 to XIM Apex Ballistics Converter
Post by: wicked96ta on 12:41 PM - 03/09/18
Awesome. Thank you.
Title: Re: XIM4 to XIM Apex Ballistics Converter
Post by: Maxxgold on 02:47 PM - 03/09/18
Very nice, thank you!
Title: Re: XIM4 to XIM Apex Ballistics Converter
Post by: wicked96ta on 02:48 PM - 03/09/18
There was an awesome curve for BC2 made by LLIMIT that I thought I would lose. Going to try and convert it.
Title: Re: XIM4 to XIM Apex Ballistics Converter
Post by: Nudedude on 01:49 AM - 03/11/18
Im using also curves to simulate PC kind of behavior, first slower but little acceleration the end.

Could be wice to test others curves too.

But why just not draw (set) it to the apex as it eas earlier if you want the same?

Its not that complicated, and maybe its not so dangerous if its not symmetrical ( like that one in first post).
Title: Re: XIM4 to XIM Apex Ballistics Converter
Post by: PegasusActual on 04:59 AM - 03/11/18
I'm not entirely sure what you're trying to say, but if you don't find my tool useful then just don't use it.
Title: Re: XIM4 to XIM Apex Ballistics Converter
Post by: mjfame on 07:02 AM - 03/11/18
https://ximconvert.000webhostapp.com/curve.php

Example usage:
(https://i.imgur.com/fMhPUt4.png)

Example result (XIM4 input on left, converted Apex curve on right):
(https://i.imgur.com/nRNuSgQ.png)

Keep in mind that it's not possible to perfectly convert curves as XIM Apex uses incompatible intervals on the X axis (steps of 2% vs steps of 5%). That means that many values are interpolated and can be slightly off compared where they would be on XIM4. But I think it will work well for most curves or at the very least give a starting point for recreating curves.

Also keep in mind that I'm using free webhosting, so it may go down outside of my control and that it's not that well tested so if it doesn't work when it should, let me know and I will try to fix it.

thanks
Title: Re: XIM4 to XIM Apex Ballistics Converter
Post by: Nudedude on 08:22 AM - 03/11/18
I'm not entirely sure what you're trying to say, but if you don't find my tool useful then just don't use it.

Your tool is very nice if you want to copy exactly :)

Curves what i have used are not that fine-adjusted so i usually just set ”something like before” thats why faster to create.

Title: Re: XIM4 to XIM Apex Ballistics Converter
Post by: Lysek17 on 09:06 AM - 03/11/18
how to copy that?  :o
Title: Re: XIM4 to XIM Apex Ballistics Converter
Post by: PegasusActual on 09:12 PM - 03/11/18
How to copy what? You copy and paste the XIM4 curve you'd like into the tool. Then you submit, then you copy the thing it spits out below into the Ballistics Editor on the Apex which is located in the aim section of the hip/ads pages..
Title: Re: XIM4 to XIM Apex Ballistics Converter
Post by: thebside on 11:59 PM - 03/11/18
Thank you for this.  I spent a good portion of my day today fudging around in excel using the slope formula, and then the fill series to come up with the missing numbers that I needed for the Apex.  After getting through 2 of my games, I gave up as it was tedious. This is a much better option!
Title: Re: XIM4 to XIM Apex Ballistics Converter
Post by: Lysek17 on 01:15 AM - 03/12/18
This link is empty ? or just I got problem with this?
Title: Re: XIM4 to XIM Apex Ballistics Converter
Post by: PegasusActual on 04:24 AM - 03/12/18
The link is a simple HTML form. I cleaned up the HTML just now but I can't imagine any web browser having major issues with it as it was before. I also added a simple error message if it fails to parse the input curve. But it's not doing any particular validation besides looking for the telltale  X4MB: :X4MB bookends in the original curve.
Title: Re: XIM4 to XIM Apex Ballistics Converter
Post by: RML on 05:16 PM - 03/15/18
Thanks Pegasus, very nice!
Title: Re: XIM4 to XIM APEX Ballistics Converter
Post by: BLM3L3SS on 07:57 PM - 03/17/18
Can somebody please explain what curves are for???
Title: Re: XIM4 to XIM APEX Ballistics Converter
Post by: PegasusActual on 08:00 PM - 03/17/18
http://community.xim.tech/index.php?topic=48616.msg574800#msg574800
Title: Re: XIM4 to XIM APEX Ballistics Converter
Post by: Grarrg on 04:31 PM - 03/23/18
I haven't gotten my Apex yet.
This looks very helpful, thank you.

One thing though, I keep reading that there aren't really needs for curves, when using the Apex, in other threads.

Is that true?
Or am I mis-reading things?
Title: Re: XIM4 to XIM APEX Ballistics Converter
Post by: PegasusActual on 01:42 AM - 03/24/18
Curves are still useful. I don't know much about anti aim assist curves as I never really used them and I'm not playing any games currently that use aim assist. But things like curves for vehicles or acceleration curves for games with slow look mechanics will always be useful.

Anyway Grarrg if you are transitioning from XIM4 to XIM Apex you might want to try my full config converter here: http://community.xim.tech/index.php?topic=62975.msg668191#msg668191

If you don't like your old curves just flatten them out. It should convert your other settings to the new format but I haven't gotten much feedback.
Title: Re: XIM4 to XIM APEX Ballistics Converter
Post by: Grarrg on 11:05 AM - 03/24/18
Awesome blossom.
Thank you!
Title: Re: XIM4 to XIM APEX Ballistics Converter
Post by: 29137 on 10:54 AM - 03/25/18
This is cool but my scriPt doesn’t seem to project an output from the converter

Below is my script, can someone try and see if it works for them


>>> XIM4 [Booms Setup] START PASTE >>>
X4C: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:X4C
<<< XIM4 END PASTE <<<
Title: Re: XIM4 to XIM APEX Ballistics Converter
Post by: PegasusActual on 11:24 AM - 03/25/18
This is cool but my scriPt doesn’t seem to project an output from the converter

Below is my script, can someone try and see if it works for them


>>> XIM4 [Booms Setup] START PASTE >>>
X4C: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:X4C
<<< XIM4 END PASTE <<<
Code: [Select]
>>> XIM4 [CONVERTED] START PASTE >>>
X5C:AAAAGgA1AC4AMAAwAC4AMgAwADEANwAxADAAMAAxAAAAFgBCAG8AbwBtAHMAIABTAGUAdAB1AHAAAAwBAAAAAAAAABIATwB2AGUAcgB3AGEAdABjAGgBAAAAAAAAAQAAAAAAAAAACcQAlgAAAAAAAAAAAASwBXgGQAcIB9AImAlgCigK8Au4DIANSA4QDtgPoBBoETAR+BLAE4gUUBUYFeAWqBdwGDgZABnIGpAbWBwgHOgdsB54H0AgCCDQIZgiYCMoI/AkuCWAJiAmmCcQJxAnECcQJxAnEGMEYBBggGJAAAAAAAAAAAAAAAAABAUBAgAAHUwdTBQUQAFAAkAQQAhhAmEBZRBgQGIgYhBqBGoCYwJpgGEQZQhlAgAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAIACQAQAAAAAYgEAAAAAAAAAAAABQAIAAAABAAAAAAAAAAAPoABkAAAAAAAAAAABAAAAyAGQAlgDIAPoBLAFeAZABwgH0AiYCWAKKArwC7gMgA1IDhAO2A+gEGgRMBH4EsATiBRQFRgV4BaoF3AYOBkAGcgakBtYHCAc6B2wHngfQCAIINAhmCJgIygj8CS4JYAmSCcQYwRgEGCAYkAAAAAAAAAAAAAAAAAEBQECAAAdTB1MFBRAAUACYQF8AmEEYhBlEGBAYiBjQGoEagJpgGoBaQFlCGUCAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAD/////AAEAAAAAAAEAAAAAAAAAAA+gAGQAAAAAAAAAAAAAAADIAZACWAMgA+gEsAV4BkAHCAfQCJgJYAooCvALuAyADUgOEA7YD6AQaBEwEfgSwBOIFFAVGBXgFqgXcBg4GQAZyBqQG1gcIBzoHbAeeB9AIAgg0CGYImAjKCPwJLglgCZIJxAAAAAAAAAAAAAAAAAAAAAAAAAAAAQFAQIAAAAAAAAUFAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAP////8AAQAAAAAAAQAAAAAAAAAAD6AAZAAAAAAAAAAAAAAAAMgBkAJYAyAD6ASwBXgGQAcIB9AImAlgCigK8Au4DIANSA4QDtgPoBBoETAR+BLAE4gUUBUYFeAWqBdwGDgZABnIGpAbWBwgHOgdsB54H0AgCCDQIZgiYCMoI/AkuCWAJkgnEAAAAAAAAAAAAAAAAAAAAAAAAAAABAUBAgAAAAAAABQUAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA/////wABAAAAAAABAAAAAAAAAAAPoABkAAAAAAAAAAAAAAAAyAGQAlgDIAPoBLAFeAZABwgH0AiYCWAKKArwC7gMgA1IDhAO2A+gEGgRMBH4EsATiBRQFRgV4BaoF3AYOBkAGcgakBtYHCAc6B2wHngfQCAIINAhmCJgIygj8CS4JYAmSCcQAAAAAAAAAAAAAAAAAAAAAAAAAAAEBQECAAAAAAAAFBQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAD/////AAEAAAAAAAEAAAAAAAAAAA+gAGQAAAAAAAAAAAAAAADIAZACWAMgA+gEsAV4BkAHCAfQCJgJYAooCvALuAyADUgOEA7YD6AQaBEwEfgSwBOIFFAVGBXgFqgXcBg4GQAZyBqQG1gcIBzoHbAeeB9AIAgg0CGYImAjKCPwJLglgCZIJxAAAAAAAAAAAAAAAAAAAAAAAAAAAAQFAQIAAAAAAAAUFAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA==:X5C
<<< XIM4 END PASTE <<<
Gave me output, I didn't validate it. I didn't adjust the sens or add smoothing though as you didn't specify. The page just outputs the translated profiles at the bottom of the page.
Title: Re: XIM4 to XIM APEX Ballistics Converter
Post by: 29137 on 11:54 AM - 03/25/18
So what do I do with the script now can I put it into the ballistics curve on the app??

Sorry I’m just very confused
Title: Re: XIM4 to XIM APEX Ballistics Converter
Post by: PegasusActual on 08:58 PM - 03/25/18
You posted a full config, not a curve. So you would paste it into the full config part of the apex app. At the beginning near where you set up the color for the config.
Title: Re: XIM4 to XIM APEX Ballistics Converter
Post by: Createanaccountalready on 09:25 AM - 04/04/18
This site cannot be reached
Title: Re: XIM4 to XIM APEX Ballistics Converter
Post by: Skorries on 11:09 PM - 04/04/18
I'm trying to access this link and it says the site cannot be reached? Is anybody else having this issue? Any help is appreciated.
Title: Re: XIM4 to XIM APEX Ballistics Converter
Post by: TSARGA on 09:56 AM - 04/05/18
Good job.
Title: Re: XIM4 to XIM APEX Ballistics Converter
Post by: Incredibowls on 03:04 PM - 05/16/18
I tried converting my script but keeps saying “could not parse input curve”. Here is my script

>>> XIM4 [cplw1dow pr3cision] START PASTE >>> X4C: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:X4C <<< XIM4 END PASTE <<<
Title: Re: XIM4 to XIM APEX Ballistics Converter
Post by: PegasusActual on 01:32 AM - 05/18/18
I tried converting my script but keeps saying “could not parse input curve”. Here is my script

>>> XIM4 [cplw1dow pr3cision] START PASTE >>> X4C: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:X4C <<< XIM4 END PASTE <<<
That's a full config. Not a ballistics curve. I don't currently have a converter for a full config. Well, I do, but it's for an older version and would need some work for current firmware..
Title: Re: XIM4 to XIM APEX Ballistics Converter
Post by: TheRealJoker31 on 07:10 AM - 05/23/18
Thank you very much!
Just Received my Apex, gonna try it tomorrow.
Let's see how Well it does his job :)
Title: Re: XIM4 to XIM APEX Ballistics Converter
Post by: juxtaposn on 07:46 PM - 10/10/18
this tool has given me a deceptive website warning with every browser  i’ve tried to access it for at least the past few weeks. has anything changed, or can you explain why this is happening
Title: Re: XIM4 to XIM APEX Ballistics Converter
Post by: PegasusActual on 04:39 AM - 10/12/18
Not sure, I guess something to do with the free webhosting ads? I'm not telling anyone to put anything in other than their XIM curves. If anyone knows any free php webhosting that isn't total junk I'm all ears.
Title: Re: XIM4 to XIM APEX Ballistics Converter
Post by: Glavas_ZG on 12:17 AM - 10/18/18
Hi  :)
I owned xim4, it worked great except one for thing.

If u move your mouse very fast (''to fast'') it would not respond inside the game, that was a problem in some games for me so i stop using xim4.

I would love to buy xim apex if this ''problem was solved'' ?

Tnx, best regards  :)
Title: Re: XIM4 to XIM APEX Ballistics Converter
Post by: SourWax702 on 03:00 AM - 10/18/18
Does anyone have some good curves for pubg? /= also how can i get my red dot zoom to be slower than when just using the reddot