I use default aswell. IVe got a razer deathadder at 10k dpi but no matter how low I put the sensitivity in the manager it always tells me it's going too fast. It doesn't really feel like that and even if I put sensitivity on 1 and the turn speeds are slow in game it still blinks as the turn speed is "too high" anyone else got this?
Using 6400 DPI and 500 hz now instead of 12k DPI and 1k hz and it seems to be working MUCH better.
Xim HIP sensitivity: 10
In-game sensitivity: max
Relative zoom sensitivity: 0
Still trying to figure out whether to use steady aim or not.
For the people saying it works so well... I'm at a loss.
Lowering the DPI and Tick Rate helped getting rid of some of the stuttering but I still get excessive aim assist when I look in the general direction of an enemy.
For comparison, Destiny has aim assist but it is far less intrusive than The Division and Overwatch.
At this point, I might just try to play the game with a controller and try to compare how the game feels.
Can't decide on 6,400 or 8,200 DPII use this with 8,200 at 500 hz.
1000Hz
Hip sensitivity 15
in-game settings maxed
Widow's maker in game zoom sensitivity set to 0
For the people saying it works so well... I'm at a loss.
DPI = dots per inch
It's how many dots per inch of mouse movement your mouse can track.
hz = hertz
It's how often your mouse reads those mouse movement signals.
I personally lowered both DPI and hz and it's been better than with a higher DPI and hz. To each their own, tho. I'd suggest you keep tinkering around with these Settings.
The easiest way is to try your max possible DPI + hz versus something lower. You will notice a difference right away and will instantly know which setting you prefer.
It's hard to explain how they behave. A picture is worth a thousand words, or in this case.. You get the idea.
The easiest way is to try your max possible DPI + hz versus something lower. You will notice a difference right away and will instantly know which setting you prefer.
It's hard to explain how they behave. A picture is worth a thousand words, or in this case.. You get the idea.
Thanks again, but it seems as if I might not make myself clear.
I have tried lowering DPI+Hz. I have a g502 mouse with max 5700 DPI / 1000Hz polling. What I would like to know (if it's even possible to explain) is how it "should feel" if I play with 5700 DPI /500Hz instead, or how it "should feel" with e.g. 4000 DPI / 1000 Hz.
Yesterday I finished at 3000 DPI / 1000Hz, but it still doesn't feel 100%. Going to try 3500 DPI / 1000Hz today.
But yeah, any explanations as to what exactly it feels like with lower/higher DPI vs lower/higher Hz would be gratly appreciated :)
´The easiest way is to try your max possible DPI + hz versus something lower. You will notice a difference right away and will instantly know which setting you prefer.
It's hard to explain how they behave. A picture is worth a thousand words, or in this case.. You get the idea.
Thanks again, but it seems as if I might not make myself clear.
I have tried lowering DPI+Hz. I have a g502 mouse with max 5700 DPI / 1000Hz polling. What I would like to know (if it's even possible to explain) is how it "should feel" if I play with 5700 DPI /500Hz instead, or how it "should feel" with e.g. 4000 DPI / 1000 Hz.
Yesterday I finished at 3000 DPI / 1000Hz, but it still doesn't feel 100%. Going to try 3500 DPI / 1000Hz today.
But yeah, any explanations as to what exactly it feels like with lower/higher DPI vs lower/higher Hz would be gratly appreciated :)
Why don't you just try every option and see what feels best to you personally? It takes less time to test it out then to make all these posts. Everyone has different opinions and preferences so I wouldn't just take everyone's word on "feel" in regards to games like this.
´The easiest way is to try your max possible DPI + hz versus something lower. You will notice a difference right away and will instantly know which setting you prefer.
It's hard to explain how they behave. A picture is worth a thousand words, or in this case.. You get the idea.
Thanks again, but it seems as if I might not make myself clear.
I have tried lowering DPI+Hz. I have a g502 mouse with max 5700 DPI / 1000Hz polling. What I would like to know (if it's even possible to explain) is how it "should feel" if I play with 5700 DPI /500Hz instead, or how it "should feel" with e.g. 4000 DPI / 1000 Hz.
Yesterday I finished at 3000 DPI / 1000Hz, but it still doesn't feel 100%. Going to try 3500 DPI / 1000Hz today.
But yeah, any explanations as to what exactly it feels like with lower/higher DPI vs lower/higher Hz would be gratly appreciated :)
Why don't you just try every option and see what feels best to you personally? It takes less time to test it out then to make all these posts. Everyone has different opinions and preferences so I wouldn't just take everyone's word on "feel" in regards to games like this.
I respectfully disagree :)
I can set DPI to any integer between 0-5700, and I have about 10 or so different polling-rate steps. Trying every option would be very time-consuming, and the problem is I am not 100% sure what I am looking for (so there's is a high risk of "placebo" effect or misinterpreting what's going on).
Thus, getting a more in-depth explanation of how a higher vs lower DPI (e.g. is it more jittery and precise with higher, and smoother but less precise with lower?), and polling rates (honestly have no idea what to even suggest here :) ) would be fantastic!
Edit: Also, trust me, I HAVE tried out a lot of things. Spent many hours doing it. But just like I wouldn't be fiddling with overclocking my PC or GPU without knowing what to look for (FPS changes, temperatures, artefacts, crashes, etc etc), I would like to have as much background knowledge on this as possible to save time. It also helps the community, because I am sure I am not the only one wondering.
what ST is everyone else runningSo far I haven't seen anyone with stable 2014xxx firmware report back if aim assist feels better :\
and are they having issues with vertical combat (i.e. hitting a phara as she's floating around (which is fairness should be an easy kill...)
when I'm turning or looking it will ALWAYS like float off to the right side
I cant play this game with my xim as is. The AA is to the point im fighting fan the hammer trying to pull it down. Playing phara is almost impossible fighting the aim assist to lead shots.
´The easiest way is to try your max possible DPI + hz versus something lower. You will notice a difference right away and will instantly know which setting you prefer.
It's hard to explain how they behave. A picture is worth a thousand words, or in this case.. You get the idea.
Thanks again, but it seems as if I might not make myself clear.
I have tried lowering DPI+Hz. I have a g502 mouse with max 5700 DPI / 1000Hz polling. What I would like to know (if it's even possible to explain) is how it "should feel" if I play with 5700 DPI /500Hz instead, or how it "should feel" with e.g. 4000 DPI / 1000 Hz.
Yesterday I finished at 3000 DPI / 1000Hz, but it still doesn't feel 100%. Going to try 3500 DPI / 1000Hz today.
But yeah, any explanations as to what exactly it feels like with lower/higher DPI vs lower/higher Hz would be gratly appreciated :)
Why don't you just try every option and see what feels best to you personally? It takes less time to test it out then to make all these posts. Everyone has different opinions and preferences so I wouldn't just take everyone's word on "feel" in regards to games like this.
I respectfully disagree :)
I can set DPI to any integer between 0-5700, and I have about 10 or so different polling-rate steps. Trying every option would be very time-consuming, and the problem is I am not 100% sure what I am looking for (so there's is a high risk of "placebo" effect or misinterpreting what's going on).
Thus, getting a more in-depth explanation of how a higher vs lower DPI (e.g. is it more jittery and precise with higher, and smoother but less precise with lower?), and polling rates (honestly have no idea what to even suggest here :) ) would be fantastic!
Edit: Also, trust me, I HAVE tried out a lot of things. Spent many hours doing it. But just like I wouldn't be fiddling with overclocking my PC or GPU without knowing what to look for (FPS changes, temperatures, artefacts, crashes, etc etc), I would like to have as much background knowledge on this as possible to save time. It also helps the community, because I am sure I am not the only one wondering.
So you're saying you don't know 100% what you're looking for, have tried tons of settings, but still want others opinions? That's because like I said, it's subjective as can be in a game that doesn't come close to 1:1 PC feel like this.
I settled on 8200 DPI 500hz after playing a bit with 1000hz as well. Seemed a tiny bit more steady when playing Tracer, didn't notice on others. My biggest issue is that I also play on PC so it's a bit of a funky feeling going back and forth control wise.
If you want to bring up that it "helps the community", why haven't you posted all of your settings that you tested and how they actually "feel"? You spent so many hours, so please share.
´The easiest way is to try your max possible DPI + hz versus something lower. You will notice a difference right away and will instantly know which setting you prefer.
It's hard to explain how they behave. A picture is worth a thousand words, or in this case.. You get the idea.
Thanks again, but it seems as if I might not make myself clear.
I have tried lowering DPI+Hz. I have a g502 mouse with max 5700 DPI / 1000Hz polling. What I would like to know (if it's even possible to explain) is how it "should feel" if I play with 5700 DPI /500Hz instead, or how it "should feel" with e.g. 4000 DPI / 1000 Hz.
Yesterday I finished at 3000 DPI / 1000Hz, but it still doesn't feel 100%. Going to try 3500 DPI / 1000Hz today.
But yeah, any explanations as to what exactly it feels like with lower/higher DPI vs lower/higher Hz would be gratly appreciated :)
Why don't you just try every option and see what feels best to you personally? It takes less time to test it out then to make all these posts. Everyone has different opinions and preferences so I wouldn't just take everyone's word on "feel" in regards to games like this.
I respectfully disagree :)
I can set DPI to any integer between 0-5700, and I have about 10 or so different polling-rate steps. Trying every option would be very time-consuming, and the problem is I am not 100% sure what I am looking for (so there's is a high risk of "placebo" effect or misinterpreting what's going on).
Thus, getting a more in-depth explanation of how a higher vs lower DPI (e.g. is it more jittery and precise with higher, and smoother but less precise with lower?), and polling rates (honestly have no idea what to even suggest here :) ) would be fantastic!
Edit: Also, trust me, I HAVE tried out a lot of things. Spent many hours doing it. But just like I wouldn't be fiddling with overclocking my PC or GPU without knowing what to look for (FPS changes, temperatures, artefacts, crashes, etc etc), I would like to have as much background knowledge on this as possible to save time. It also helps the community, because I am sure I am not the only one wondering.
So you're saying you don't know 100% what you're looking for, have tried tons of settings, but still want others opinions? That's because like I said, it's subjective as can be in a game that doesn't come close to 1:1 PC feel like this.
I settled on 8200 DPI 500hz after playing a bit with 1000hz as well. Seemed a tiny bit more steady when playing Tracer, didn't notice on others. My biggest issue is that I also play on PC so it's a bit of a funky feeling going back and forth control wise.
If you want to bring up that it "helps the community", why haven't you posted all of your settings that you tested and how they actually "feel"? You spent so many hours, so please share.
Wow, what's with the tone?
I did not say I want other's opinions. Read my example again please. Or, if you're gonna keep being a dick about it, don't.
´The easiest way is to try your max possible DPI + hz versus something lower. You will notice a difference right away and will instantly know which setting you prefer.
It's hard to explain how they behave. A picture is worth a thousand words, or in this case.. You get the idea.
Thanks again, but it seems as if I might not make myself clear.
I have tried lowering DPI+Hz. I have a g502 mouse with max 5700 DPI / 1000Hz polling. What I would like to know (if it's even possible to explain) is how it "should feel" if I play with 5700 DPI /500Hz instead, or how it "should feel" with e.g. 4000 DPI / 1000 Hz.
Yesterday I finished at 3000 DPI / 1000Hz, but it still doesn't feel 100%. Going to try 3500 DPI / 1000Hz today.
But yeah, any explanations as to what exactly it feels like with lower/higher DPI vs lower/higher Hz would be gratly appreciated :)
Why don't you just try every option and see what feels best to you personally? It takes less time to test it out then to make all these posts. Everyone has different opinions and preferences so I wouldn't just take everyone's word on "feel" in regards to games like this.
I respectfully disagree :)
I can set DPI to any integer between 0-5700, and I have about 10 or so different polling-rate steps. Trying every option would be very time-consuming, and the problem is I am not 100% sure what I am looking for (so there's is a high risk of "placebo" effect or misinterpreting what's going on).
Thus, getting a more in-depth explanation of how a higher vs lower DPI (e.g. is it more jittery and precise with higher, and smoother but less precise with lower?), and polling rates (honestly have no idea what to even suggest here :) ) would be fantastic!
Edit: Also, trust me, I HAVE tried out a lot of things. Spent many hours doing it. But just like I wouldn't be fiddling with overclocking my PC or GPU without knowing what to look for (FPS changes, temperatures, artefacts, crashes, etc etc), I would like to have as much background knowledge on this as possible to save time. It also helps the community, because I am sure I am not the only one wondering.
So you're saying you don't know 100% what you're looking for, have tried tons of settings, but still want others opinions? That's because like I said, it's subjective as can be in a game that doesn't come close to 1:1 PC feel like this.
I settled on 8200 DPI 500hz after playing a bit with 1000hz as well. Seemed a tiny bit more steady when playing Tracer, didn't notice on others. My biggest issue is that I also play on PC so it's a bit of a funky feeling going back and forth control wise.
If you want to bring up that it "helps the community", why haven't you posted all of your settings that you tested and how they actually "feel"? You spent so many hours, so please share.
Wow, what's with the tone?
I did not say I want other's opinions. Read my example again please. Or, if you're gonna keep being a dick about it, don't.
´The easiest way is to try your max possible DPI + hz versus something lower. You will notice a difference right away and will instantly know which setting you prefer.
It's hard to explain how they behave. A picture is worth a thousand words, or in this case.. You get the idea.
Thanks again, but it seems as if I might not make myself clear.
I have tried lowering DPI+Hz. I have a g502 mouse with max 5700 DPI / 1000Hz polling. What I would like to know (if it's even possible to explain) is how it "should feel" if I play with 5700 DPI /500Hz instead, or how it "should feel" with e.g. 4000 DPI / 1000 Hz.
Yesterday I finished at 3000 DPI / 1000Hz, but it still doesn't feel 100%. Going to try 3500 DPI / 1000Hz today.
But yeah, any explanations as to what exactly it feels like with lower/higher DPI vs lower/higher Hz would be gratly appreciated :)
Why don't you just try every option and see what feels best to you personally? It takes less time to test it out then to make all these posts. Everyone has different opinions and preferences so I wouldn't just take everyone's word on "feel" in regards to games like this.
I respectfully disagree :)
I can set DPI to any integer between 0-5700, and I have about 10 or so different polling-rate steps. Trying every option would be very time-consuming, and the problem is I am not 100% sure what I am looking for (so there's is a high risk of "placebo" effect or misinterpreting what's going on).
Thus, getting a more in-depth explanation of how a higher vs lower DPI (e.g. is it more jittery and precise with higher, and smoother but less precise with lower?), and polling rates (honestly have no idea what to even suggest here :) ) would be fantastic!
Edit: Also, trust me, I HAVE tried out a lot of things. Spent many hours doing it. But just like I wouldn't be fiddling with overclocking my PC or GPU without knowing what to look for (FPS changes, temperatures, artefacts, crashes, etc etc), I would like to have as much background knowledge on this as possible to save time. It also helps the community, because I am sure I am not the only one wondering.
So you're saying you don't know 100% what you're looking for, have tried tons of settings, but still want others opinions? That's because like I said, it's subjective as can be in a game that doesn't come close to 1:1 PC feel like this.
I settled on 8200 DPI 500hz after playing a bit with 1000hz as well. Seemed a tiny bit more steady when playing Tracer, didn't notice on others. My biggest issue is that I also play on PC so it's a bit of a funky feeling going back and forth control wise.
If you want to bring up that it "helps the community", why haven't you posted all of your settings that you tested and how they actually "feel"? You spent so many hours, so please share.
Wow, what's with the tone?
I did not say I want other's opinions. Read my example again please. Or, if you're gonna keep being a dick about it, don't.
How can you hear tone from text? I'm not being a dick, I'm giving my opinion on settings stating this game is definitely subjective on "feel" which is what you asked about. You're asking about hz and dpi, there's not much to talk about outside of opinion on that "feel". You didn't mention curves or anything. No need to be overly sensitive. I highlighted where you asked for feel, which is an opinion.
Like I said, please share your findings so far. I'm genuinely interested since you invested hours into testing.
Here you go: http://literarydevices.net/tone/
My findings so far? All settings feel different. No common theme. Hence the question.
The official ST is definitely the best. If you feel otherwise, you have something broken or configured wrong.I use a G502 12k DPI 1k polling. I dont use curves or boost for any game i play. Nothing is broking or configured wrong, just didnt like the way it felt.
1) Use the highest NATIVE DPI that your mouse can do. Not all 12k DPIs are the same. Some sensors max at 4k or 6k and use "software multipliers".
2) Start with 500hz polling first. You can try 1000hz. Honestly, I've tried each for months at a time and struggle to find a huge difference with the XIM.
3) Don't use boost on official curves
4) I usually recommend no curves for official STs as well. At a minimum, make sure official STs feel 1to1ish without a curve first and THEN add a curve if you like. The best good use of curves I can think of are for people who like to play low sensitivity for aiming but still have a way to turn / look quickly for movement.
I use G502. No issues whatsoever. I've been using XIM for several years now.
Not all games "feel" the same, even on PC.
Sent from my Nexus 6P using Tapatalk
I've played all the games and did very well with all of them using the same general strat for settings as I've outlined above.
Destiny felt different than CoD that felt different than BF that felt WAY different than L4D that felt different than The Division, etc.
The only thing you should be worried about:
1) ST is out
2) General sensitivity
3) If you like super low sensitivity for aiming, you MAY want to consider a curve with acceleration in it.
That's it.
Boost, wacky curves, etc.... placebo,imo.
Sent from my Nexus 6P using Tapatalk
The point I'm trying to make is that there is no way to make every game feel a certain mostly-the-same way.I agree, that's why i'm saying making a statement like: "Official ST is out if you don't like it something is wrong with your setup" is wrong..Xim has always been about making it feel the way you like it. I know it's advertized as 1:1 just like the PC but that;s not true. I don't mind that, been using xim since V1. All i said was, The doom st feels the best for me, just putting that out there because maybe someone else will use the official ST and be like "Hmm feels a bit off.." and reads this thread, tries out the Doom one and likes it more. You never know..and that's the beauty of the Xim, you can try all kinds of crazy setups to find your preferable way of playing.
Once the ST is out, it's all about playing and getting good at learning to operate within the game's max turn speed.
There is no magical trick to aim faster than the game allows, get rid of aim assist, etc.
The amount of time you spend looking for a unicorn is all time that could be spent learning how to play with as good as it gets.... an ST.
Sent from my Nexus 6P using Tapatalk
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AA8fLj5OWmNrc3uCipKaoamxuMDI:X4MB
<<< XIM4 END PASTE <<<
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANQAxADEAMgAwAA8eLTxLW2VveYONl6Grtb/IyMjI:X4MB
<<< XIM4 END PASTE <<<
Ok so I've found mine.Thanks for this! Works great!
Overwatch ST
G502 - 8200DPI 500 poll
Seeing as Treyarch helped out Blizzard on their AA. I thought, hmm maybe I should try RML's curve to fight it. OH @#$%! 1st game spent tweaking sensitivity. 2nd game dropped a 42 elimination 5 death game
Hip
12
RML's BlackOps3 Curve
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AA8fLj5OWmNrc3uCipKaoamxuMDI:X4MB
<<< XIM4 END PASTE <<<
Hope it helps someone.
*UPDATE*
Since posting I've gone on nothing but 30+ elimination games. Solo queue Wins. Not bad. Taking a break to make videos lol
Considered making another thread about Aim Assist only as this one is getting derailed, hopefully people find the information.
These are my latest attempts at making the game playable against aim assist.
HIP
Steady Aim: ON
Curve:Code: [Select]>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AA8fLj5OWmNrc3uCipKaoamxuMDI:X4MB
<<< XIM4 END PASTE <<<
Feels pretty good compared to the hitbox drowning you in mud before. Thanks to SugahFree who reported testing this CoD curve earlier in the day here.
ADS
Curve:Code: [Select]>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANQAxADEAMgAwAA8eLTxLW2VveYONl6Grtb/IyMjI:X4MB
<<< XIM4 END PASTE <<<
Not very good solution, and I'm not happy about having to use a curve. But, it seems to burst the aim assist bubble a few more times a game than before and even that is something, as the game is unplayable for a sniper at 1:1.
It has initial acceleration for your drag to hopefully burst the aim assist bubble, and then evens out so you don't overshoot. Curve was made for Destiny by RML. Further refinment and testing welcome.
Reference
DPI: 8200
Tick: 500
HIP: 16
ADS: 8
Ok so I've found mine.
Overwatch ST
G502 - 8200DPI 500 poll
Seeing as Treyarch helped out Blizzard on their AA. I thought, hmm maybe I should try RML's curve to fight it. OH @#$%! 1st game spent tweaking sensitivity. 2nd game dropped a 42 elimination 5 death game
Hip
12
RML's BlackOps3 Curve
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AA8fLj5OWmNrc3uCipKaoamxuMDI:X4MB
<<< XIM4 END PASTE <<<
Hope it helps someone.
*UPDATE*
Since posting I've gone on nothing but 30+ elimination games. Solo queue Wins. Not bad. Taking a break to make videos lol
What the hell is "STv2"? Can someone please explain?
@SugahFree
You're only using a HIP curve, no ADS? Why would it affect your ADS then? :o
What the hell is "STv2"? Can someone please explain?
Are you 100% certain that a HIP curve does also affect ADS?
Since you can change your sensitivity with each character, how do you set that up in xim4? Say if you want to change the sensitivity of the sniper but you still wanted another sense for hanzo
How do people deal with the general "floatyness" of the gaming?
And what's the reason for it, could someone explain?
My dudes, you are all asking way to many questions. Just make a second Overwatch ST and give it a shot.
Btw, having an ADS profile isn't good for Zenyatta's right click. Even Mercy's too. Just saying
Btw, having an ADS profile isn't good for Zenyatta's right click. Even Mercy's too. Just saying
That's why "Activation Delay" can be enabled as it takes like 500ms for Widowmaker scope to finish its animation.
Btw for Mercy I found a setting that lets you toggle her beams and I prefer to use it that way. Keeps the beam active until your next click, it conveniently also avoids activating the ADS profile.
Btw for Mercy I found a setting that lets you toggle her beams and I prefer to use it that way. Keeps the beam active until your next click, it conveniently also avoids activating the ADS profile.
How do people deal with the general "floatyness" of the gaming?
And what's the reason for it, could someone explain?
its the game, its has an inputlag
so in order to not have even more inputlag id play from a gaming monitor, then its not so noticeable
if you have to play from a TV make sure its in gamingmode so the lag from the TV isnt so big
That's why "Activation Delay" can be enabled as it takes like 500ms for Widowmaker scope to finish its animation.
My dudes, you are all asking way to many questions. Just make a second Overwatch ST and give it a shot.
I currently don't use an ADS profile since the HIP one is being used as default and TO ME it works magnificent to my likings. Since I use to play a lot of CS 1.0-Source I did a lot of flick shots with the AWP and i've been use to that type of movement. RML's Destiny hip curve still allows that same feel to me. I don't feel that nasty AA tug when people get close.
As of now I have no plans of experimenting any more. I am beyond happy with my current settings. I'm just glad my curiosity won this time around lol.
Played with various settings and I cannot get the game to feel good. Some characters are especially bad, widowmaker.. characters that require 'tracking' aim don't feel all that great either, not sure if it's because of the AA or what. Maybe a different mouse would make a difference, I'm using a g400. At max DPI the xim is blinking like crazy even when I make slow movements. At the lowest DPI I need to turn the xim sensitivity up to like 300, and it still feels too slow. Adjusting aim vertically feels really terrible in general too, not sure what's the deal with it, just feels sluggish. Pharah sitting up in the air should be a free kill. Super annoying.
How do people deal with the general "floatyness" of the gaming?
And what's the reason for it, could someone explain?
its the game, its has an inputlag
so in order to not have even more inputlag id play from a gaming monitor, then its not so noticeable
if you have to play from a TV make sure its in gamingmode so the lag from the TV isnt so big
Thanks for the reply, already playing from a gaming monitor. Any other suggestions as to how I can reduce the feeling?
Edit: would it be possible to work around it with a curve lowering the deadzone (making it smaller and thus making the crosshair react faster to mousse movements), or am I misunderstanding something?
How do people deal with the general "floatyness" of the gaming?
And what's the reason for it, could someone explain?
its the game, its has an inputlag
so in order to not have even more inputlag id play from a gaming monitor, then its not so noticeable
if you have to play from a TV make sure its in gamingmode so the lag from the TV isnt so big
Thanks for the reply, already playing from a gaming monitor. Any other suggestions as to how I can reduce the feeling?
Edit: would it be possible to work around it with a curve lowering the deadzone (making it smaller and thus making the crosshair react faster to mousse movements), or am I misunderstanding something?
use boost for that and not a curve
but no the lag comes from the game, even with boost its still there
go with increments of 100, i assume something like 1000 might already be too much
[/quote
hi, so if I understood correctly , the boost value allows you to speed up turning with your hero?
Ok so I've found mine.
Overwatch ST
G502 - 8200DPI 500 poll
Seeing as Treyarch helped out Blizzard on their AA. I thought, hmm maybe I should try RML's curve to fight it. OH @#$%! 1st game spent tweaking sensitivity. 2nd game dropped a 42 elimination 5 death game
Hip
12
RML's BlackOps3 Curve
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AA8fLj5OWmNrc3uCipKaoamxuMDI:X4MB
<<< XIM4 END PASTE <<<
Hope it helps someone.
*UPDATE*
Since posting I've gone on nothing but 30+ elimination games. Solo queue Wins. Not bad. Taking a break to make videos lol
go with increments of 100, i assume something like 1000 might already be too muchhi, so if I understood correctly , the boost value allows you to speed up turning with your hero?
Ok so after playing all day lol I've found the following curve to work far better than the one I previously suggested.
Again big thanks goes to the Curve King RML.
Overwatch ST
STv2
G502
8200 DPI
CURVE - RML's Destiny HIP Curve
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANQAxADEAMgAwAA0aJzRBTlxreoyescjIyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
HIP
14.85
Steady Aim - ON
Widowmaker Sensitivity - 36
This breaks the AA Bubble even better than RML's Blops3 Curve.
I don't want to sound like I am exaggerating but I was pulling off some CRAZY stuff. I want to even say PC like lol with McCree, Widowmaker, Hanzo. The aim is on point and so easy to make minor adjustments. IT also allows you to do flick shots.
Use controlled swiped movements or you'll be red lighting in the XIM.
Good luck boys, I'll see you all in game.
If you're a sweaty try hard shoot me a FR on PSN
I want to start a ranked team for serious players only.
Overwatch ST
STv2
G502
8200 DPI
CURVE - RML's Destiny HIP Curve
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANQAxADEAMgAwAA0aJzRBTlxreoyescjIyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
HIP
14.85
Steady Aim - ON
Use controlled swiped movements or you'll be red lighting in the XIM.
Use controlled swiped movements or you'll be red lighting in the XIM.
It means you are losing speed because you are moving your mouse too fast for the game's turning cap to keep up. You need to turn slower (controlled swipes) . My Xim is blinking red as well but I can still turn quick enough so it does not bother me.
Overwatch ST
STv2
G502
8200 DPI
CURVE - RML's Destiny HIP Curve
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANQAxADEAMgAwAA0aJzRBTlxreoyescjIyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
HIP
14.85
Steady Aim - ON
So I tried this and my Xim keeps on red blinkingUse controlled swiped movements or you'll be red lighting in the XIM.
What's "controlled swiped movements" and how do I use it?
Try this RML Curve and let me know how it works for you guys. I know I said I'd stop but I want you guys to enjoy this game.Only for ADS?
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1ABcvRl52goyWoKq0vsjIyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
this one has even better feel and control of the AA
8200 dpi
8 sensitivity
100 boost
Use it for ADS as well and mess around. I wanna say I found a winner
Steady aim OFF
Try this RML Curve and let me know how it works for you guys. I know I said I'd stop but I want you guys to enjoy this game.
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1ABcvRl52goyWoKq0vsjIyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
this one has even better feel and control of the AA
8200 dpi
8 sensitivity
100 boost
Use it for ADS as well and mess around. I wanna say I found a winner
Steady aim OFF
Try this RML Curve and let me know how it works for you guys. I know I said I'd stop but I want you guys to enjoy this game.
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1ABcvRl52goyWoKq0vsjIyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
this one has even better feel and control of the AA
8200 dpi
8 sensitivity
100 boost
Use it for ADS as well and mess around. I wanna say I found a winner
Steady aim OFF
Try this RML Curve and let me know how it works for you guys. I know I said I'd stop but I want you guys to enjoy this game.
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1ABcvRl52goyWoKq0vsjIyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
this one has even better feel and control of the AA
8200 dpi
8 sensitivity
100 boost
Use it for ADS as well and mess around. I wanna say I found a winner
Steady aim OFF
How can I tell what version of ST I'm using? My XIM is up to date but I wanna know what ST version I'm using, just in case
On your mobile app, upper right corner. I think the tab is called "About" you will see your Firmware and Manager version right away.
Try this RML Curve and let me know how it works for you guys. I know I said I'd stop but I want you guys to enjoy this game.Only for ADS?
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1ABcvRl52goyWoKq0vsjIyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
this one has even better feel and control of the AA
8200 dpi
8 sensitivity
100 boost
Use it for ADS as well and mess around. I wanna say I found a winner
Steady aim OFF
Ah sugah for hip i use your config now at 8000 dpi and i love it! Thank you!
Inviato dal mio SM-G935F utilizzando Tapatalk
Try this RML Curve and let me know how it works for you guys. I know I said I'd stop but I want you guys to enjoy this game.
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1ABcvRl52goyWoKq0vsjIyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
this one has even better feel and control of the AA
8200 dpi
8 sensitivity
100 boost
Use it for ADS as well and mess around. I wanna say I found a winner
Steady aim OFF
hello sugahfree, did you change it again? a couple of days ago I picked your settings and they are PERFECT for me, I only swap between 12k dpi and 8k dpi depending on the hero i m using.
But now from this post of yours, I see that it's different, like steady aim off? and 8sens from 15? 100 boost? Is the curve still the same?
Tell me from these settings and the one u posted a couple of days ago, what s the difference? because I m having a blast with the settings u posted 2days ago!
edit: I used this config posted by you:
Overwatch ST
STv2
G502
8200 DPI
CURVE - RML's Destiny HIP Curve
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANQAxADEAMgAwAA0aJzRBTlxreoyescjIyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
HIP
14.85
Steady Aim - ON
Widowmaker Sensitivity - 36
I just put the hip sens on 30 but the rest its the same and for me its perfect, playing genji like on pc
Try this RML Curve and let me know how it works for you guys. I know I said I'd stop but I want you guys to enjoy this game.
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1ABcvRl52goyWoKq0vsjIyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
this one has even better feel and control of the AA
8200 dpi
8 sensitivity
100 boost
Use it for ADS as well and mess around. I wanna say I found a winner
Steady aim OFF
with 5600 dpi what would you change on the settings? Because it still fills not 100% anyone know what I would changge these too?
Does the curve really feel better? Shouldn't we just trust the official ST? Or is it personal preference?
Either way - I'll try this tonight.
-------------------------
From Sugah - http://xim4.com/community/index.php?topic=47152.0
"Try this RML Curve and let me know how it works for you guys. I know I said I'd stop but I want you guys to enjoy this game.
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1ABcvRl52goyWoKq0vsjIyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
this one has even better feel and control of the AA
8200 dpi
8 sensitivity
100 boost
Use it for ADS as well and mess around. I wanna say I found a winner
Steady aim OFF"
Yes I changed it again. My curiosity was bugging me again. The last curve I used from RML was his destiny curve. It was good but there were times I would still feel that AA tug with Pharrah, McCree and it bugged me. So I tested RMLs BLOPs3 ADS CURVE he uses for his 'Agreesive SMG' and found out after 15 games far more enjoyable than the previous ones I posted. This curve I am using for my HIP
Guys if you want a close 1:1 on overwatch simply switch to X1 config if you are on PS4 and if you are X1 switch to PS4 config, enjoy the game:)
Guys if you want a close 1:1 on overwatch simply switch to X1 config if you are on PS4 and if you are X1 switch to PS4 config, enjoy the game:)
Wat? :o
Guys if you want a close 1:1 on overwatch simply switch to X1 config if you are on PS4 and if you are X1 switch to PS4 config, enjoy the game:)
Wat? :o
Sorry haha, I meant use the Xbox One Overwatch ST for ps4 and Ps4 Overwatch ST for X1, i did it and i'm playing close to 1:1, try it!:)
Guys if you want a close 1:1 on overwatch simply switch to X1 config if you are on PS4 and if you are X1 switch to PS4 config, enjoy the game:)
Wat? :o
Sorry haha, I meant use the Xbox One Overwatch ST for ps4 and Ps4 Overwatch ST for X1, i did it and i'm playing close to 1:1, try it!:)
You know what, I may tinker with this idea. Totally never thought of that lol. The analog resolution on Xbox one controllers are higher than PS4s.
Thank you sir!
use the Xbox One Overwatch ST for ps4 [...] i did it and i'm playing close to 1:1, try it!:)
[..] i'm currently trying sugahfree's settings it seems slow for my liking but 'll give it a shot.
Hello guys, what i have to say is that this piece of "equipment" didn't live up to it expectations (IMHO). I've tried R6 siege, COD as said it was the BEST experience with it, Overwatch, many and many configs and tries. After all tries and errors, i came to the conclusion that, to sum it up, NONE of them comes EVEN CLOSE to PC 1:1 as adverstised. :( NONE. So disappointed. Well, that's what i get for not learnig to play the controller.
Sorry guys, didn't want to sound like raging or nothing, but for me, i'm not even sure if it's best than the controller. Maybe a little, but far from PC experience 1:1.
Unfortunately Overwatch has terrible input lag. I waited for the game for so long only to be disappointed by the aim assist and the input lag.
Someone made a comparison of CoD and Overwatch with a high speed camera on Reddit. Overwatch results were horrible, and Blizzard won't respond to any questions about it. Just like they ignore every inquiry about aim assist.
the console has a big inputlag which delays all your actions, that alone pushes it miles away from the PC
you cannot do something against that other than telling the developer to code their games more efficient for consoles
Whats your settings Od1n/BeamImpact? I still watch your vid's on youtube and you seem to be doing alright in the game, you using a curve if so which one? Im guessing your sense is around 13 - 16? :)
(http://i.imgur.com/SEDKBfQ.jpg)
Boom!
(http://women2.com/wp-content/uploads/2014/07/Barney-Stinson-Robin-Sparkles-Celebrate-With-Champagne-Jumping-On-Beds.gif)
now all thats let to fix is the inputlag of the game!
Overwatch for consoles are terrible compare to pc in terms of look mechanics.
some people here really need to try both versions of the game.
I wish I never tried the PC version because its not even close.
Accel and slow aim needs to go. I wonder why they did it like this.
You'll still need aim assist with hitscan heroes like Soldier/McCree because of how terrible the vertical movement this game has
On thing at a time guys... the AA removal is a great thing. I'm sure there will be more to come.Check out the link tehcrs posted above. Let's try to get what we want lol
Is anyone a good Widowmaker on the PS4? As in - Widowmaker is your main character?
Curve or no curve, my XIM keeps red blinking
Anyway to fix this?
I love Widowmaker on Xim
http://masteroverwatch.com/profile/psn/global/ForZaKRC (http://masteroverwatch.com/profile/psn/global/ForZaKRC)
36 Killstreak video
https://youtu.be/in399wXhOto (https://youtu.be/in399wXhOto)
Standard ST btw, no curves or boost
ForZaKRC - lol at the play of the game in that vid, will add you and TYGER-1988 tonight.
Add me - http://masteroverwatch.com/profile/psn/global/UnSurreal
I love Widowmaker on Xim
http://masteroverwatch.com/profile/psn/global/ForZaKRC (http://masteroverwatch.com/profile/psn/global/ForZaKRC)
36 Killstreak video
https://youtu.be/in399wXhOto (https://youtu.be/in399wXhOto)
Standard ST btw, no curves or boost
Someone correct me if I'm wrong, but all my setups blink on purpose.
Blinking is not bad. You should have all your setups blinking when you move the mouse at "Your physical max movement speed"
If it doesn't blink (and the setting is on) then you are essentially never putting an analog stick to 100% tilt
I love Widowmaker on Xim
http://masteroverwatch.com/profile/psn/global/ForZaKRC (http://masteroverwatch.com/profile/psn/global/ForZaKRC)
36 Killstreak video
https://youtu.be/in399wXhOto (https://youtu.be/in399wXhOto)
Standard ST btw, no curves or boost
Whats your Widowmaker scoped setting? 100?
Also what mouse/xim sensitivity?
Nice sniping
I love Widowmaker on XimBtw....sorry but what is Btw?
http://masteroverwatch.com/profile/psn/global/ForZaKRC (http://masteroverwatch.com/profile/psn/global/ForZaKRC)
36 Killstreak video
https://youtu.be/in399wXhOto (https://youtu.be/in399wXhOto)
Standard ST btw, no curves or boost
By the way..
Everybody just chime in and leave their two cents, the more the merrier!
Link again: http://us.battle.net/forums/en/overwatch/topic/20745265289
So, people who have played characters who are nimble but also need to be highly accurate (Genji comes to mind) what settings do you use?I always planned on using this curve for fast turns, but when I discovered how bad aim assist is had to use one that accelerates much sooner. Now that we know aim assist will be tunable in the future I will go back to it. Test it in the training range right now, maybe it helps you:
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANQAwADgAMQA2AAoUHigyPElacIupyMjIyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
(http://i.imgur.com/wOxEsSk.jpg)
[..] i really appreciate your work there tehcrs! :) [..]
When the AA swivel gets released, does that mean Overwatch will have to be retrained?
When the AA swivel gets released, does that mean Overwatch will have to be retrained?
Everybody just chime in and leave their two cents, the more the merrier!
Link again: http://us.battle.net/forums/en/overwatch/topic/20745265289
guys bump this topic on battle.net, im not kidding! :)
maybe we should open a new topic in the xim forum to even reach out to the non overwatch players to bump it ;P
Sorry if this is a dumb question but I have a Razer Deathadder i'm using and I have to have the sensitivity at like 90+ on overwatch for it to be decent. How do I increase the DPI on the mouse when on PS4 or do I plug it into the pc and change it there and it will stay that way?If you're mouse has onboard memory (not sure about the DeathAdder) you'd plug it into your PC, change the DPI in Razer Synapse and save it.
McCree will also be nerfed on consolesWait how is D.VA bad?! She's a great off tank.
Not sure about Widow but she's already a bad hero because of the terrible movement this game has and a nerf would make her worse than the worst hero in the game aka D.Va
Yeah MCree will get nerfed but the console guys haven't mentioned widow at all. And D'va has one of the lowest win % in the game currently.Interesting. I didn't know that about D.VA. Maybe my successes have been lucky.
Sorry if this is a dumb question but I have a Razer Deathadder i'm using and I have to have the sensitivity at like 90+ on overwatch for it to be decent. How do I increase the DPI on the mouse when on PS4 or do I plug it into the pc and change it there and it will stay that way?If you're mouse has onboard memory (not sure about the DeathAdder) you'd plug it into your PC, change the DPI in Razer Synapse and save it.
The DPI should be set when you plug it back into the XIM.
Sent from my Nexus 6P using Tapatalk
Sorry if this is a dumb question but I have a Razer Deathadder i'm using and I have to have the sensitivity at like 90+ on overwatch for it to be decent. How do I increase the DPI on the mouse when on PS4 or do I plug it into the pc and change it there and it will stay that way?If you're mouse has onboard memory (not sure about the DeathAdder) you'd plug it into your PC, change the DPI in Razer Synapse and save it.
The DPI should be set when you plug it back into the XIM.
Sent from my Nexus 6P using Tapatalk
Does the DPI make any big difference though? I mean would it just allow me to lower sensitivity but still feel the same just a different setting? I have a logitech G502 laying around I could use if that would be better.
McCree and Widowmaker nerfs coming this week - http://us.battle.net/forums/en/overwatch/topic/20745045439?page=2#post-23
Sorry if this is a dumb question but I have a Razer Deathadder i'm using and I have to have the sensitivity at like 90+ on overwatch for it to be decent. How do I increase the DPI on the mouse when on PS4 or do I plug it into the pc and change it there and it will stay that way?
I was just reading this:
https://www.reddit.com/r/Overwatch/comments/4lu9re/for_ps4_players_of_overwatch_can_we_please_talk/
Basically they say the deadzone is a square and some of the angles just aren't covered which explains why we can't hit a @#$% thing in the air. Diagonal movement is trash with thumbsticks and mouse both.
I knew something is wrong when trying to hit Pharah but I just couldn't articulate it, never experienced it before. You are dragging upwards in a diagonal and the cursor is kind of wobbling around, and speeding up counterintuitively thanks to built-in acceleration.
But is there anything we can do/tune at all to work around that flaw in the game? I remember in Killzone ST people tuned deadzone setting to achieve [what?]Quote from: 2pumpchumpSo, people who have played characters who are nimble but also need to be highly accurate (Genji comes to mind) what settings do you use?I always planned on using this curve for fast turns, but when I discovered how bad aim assist is had to use one that accelerates much sooner. Now that we know aim assist will be tunable in the future I will go back to it. Test it in the training range right now, maybe it helps you:Code: [Select]>>> XIM4 [Mouse Ballistics] START PASTE >>>
(http://i.imgur.com/wOxEsSk.jpg)
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANQAwADgAMQA2AAoUHigyPElacIupyMjIyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
Yeah MCree will get nerfed but the console guys haven't mentioned widow at all. And D'va has one of the lowest win % in the game currently.
Bought a xim pretty much for overwatch, just got around to playing battlefield and call of duty and wow... This game feels so off compared to those. The floatiness is now much more noticeable
16 pages in, I don't see a stand out config.. has anyone found the 'be all and end all' set up? I'm still running a G502 12k DPI, 1k Polling & 20 in-game sense..
16 pages in, I don't see a stand out config.. has anyone found the 'be all and end all' set up? I'm still running a G502 12k DPI, 1k Polling & 20 in-game sense..
16 pages in, I don't see a stand out config.. has anyone found the 'be all and end all' set up? I'm still running a G502 12k DPI, 1k Polling & 20 in-game sense..
Blizzard is adding a slider to adjust the strength of aim assist in game. It will be released in an update later this month according to them. You may just have to fight the AA until that patch is released.
Let's make another thread on OW forum calling out Bliz for the XY ratio and the god awful input lag
I can live with the slow sensitivity. Just not with those two problems
Sorry to spoil the party but removing aim assist won't fix the problem. In fact, (as I've posted earlier) you'll need aim assist with most hitscan heroes because of the awful look mechanic
Btw @Odin, are you sure there's AA on Widow's scope? I'm pretty sure there's none. I've tested it with my friends and we didn't feel it at all
How can one be a "monster" Widowmaker on consoles lol
How can one be a "monster" Widowmaker on consoles lol
Try this RML Curve and let me know how it works for you guys. I know I said I'd stop but I want you guys to enjoy this game.
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1ABcvRl52goyWoKq0vsjIyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
this one has even better feel and control of the AA
8200 dpi
8 sensitivity
100 boost
Use it for ADS as well and mess around. I wanna say I found a winner
Steady aim OFF
Try this RML Curve and let me know how it works for you guys. I know I said I'd stop but I want you guys to enjoy this game.
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1ABcvRl52goyWoKq0vsjIyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
this one has even better feel and control of the AA
8200 dpi
8 sensitivity
100 boost
Use it for ADS as well and mess around. I wanna say I found a winner
Steady aim OFF
Try this RML Curve and let me know how it works for you guys. I know I said I'd stop but I want you guys to enjoy this game.
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1ABcvRl52goyWoKq0vsjIyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
this one has even better feel and control of the AA
8200 dpi
8 sensitivity
100 boost
Use it for ADS as well and mess around. I wanna say I found a winner
Steady aim OFF
Hi guys,
How do I copy and paste this information in my xim4 app? Sorry i'm completely new to this!
Thanks.
I don't know what's up with the standard ST, but when I used the doom ST before the OW one was out I was absolutely dominating. Now I can't seem to hit anything. Using a g303 / 12000dpi / 1000hz default settings in app for xim 4.
Reading the post about the Doom ST I switched back to that one and finding it also better so sticking with Doom ST for the moment. I don't know what it is exactly but somehow it 'feels' better.
Playing with G502 @ 6400 dpi
This is my config for Doom ST
>>> XIM4 [Overwatch Test v2] START PASTE >>>
X4C: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:X4C
<<< XIM4 END PASTE <<<
Zenyatta play with Doom ST
https://youtu.be/yFi3l_Mg_xo (https://youtu.be/yFi3l_Mg_xo)
I think it's time to join the PC Master RaceYeah...it's unfortunate that most of my friends are on Xbox. The game on PC is great.
guys dont forget to check this outThanks is Od1n.
http://xim4.com/community/index.php?topic=47462.0
how do you watch ranks? Somebody said, thai he is top 100 widowmaker. Can you give me a link of this statistics. Or, maybe it is in the game and i just havent found it.
how do you watch ranks? Somebody said, thai he is top 100 widowmaker. Can you give me a link of this statistics. Or, maybe it is in the game and i just havent found it.
www.masteroverwatch.com, simply type ur username.
I'm rank 192 bastion)))Gross ;)
https://overwatchtracker.com/profile/psn/global/Kaiord?utm_source=recentgames&utm_medium=link&utm_campaign=recentgames
64 Hanzo xD I'm going to hit 35 hrs on him then swap to Genji as a main for a while I think.
Side note: The posting verification is hell for one as color blind as me :D
So for the past week or so i have been using settings similar to what Odin / Beamimpact posted earlier on in this thread.
HIP: 25 sens
ADS: 18 sens
No curve
Some Soldier gameplay: https://www.youtube.com/watch?v=PWuYBG6BYWQ
And yes i still struggle with Aim Assist at times and Pharah = FML
Will this help us XIM4 users possibly?
The competitive play patch is apparently going to make some changes to look mechanics, I am not 100% sure if this will help us drastically though.
https://playoverwatch.com/en-us/blog/20157263
"Improved dead-zone controls, giving players increased accuracy during off-center and diagonal stick movement"
Is everybody else getting something similar to mouse acceleration on this game? I am always off target when I do the 360 degree test.
So for the past week or so i have been using settings similar to what Odin / Beamimpact posted earlier on in this thread.
HIP: 25 sens
ADS: 18 sens
No curve
Some Soldier gameplay: https://www.youtube.com/watch?v=PWuYBG6BYWQ
And yes i still struggle with Aim Assist at times and Pharah = FML
Nice soldier gameplay, you seem to do really well with him and your aiming looks to be accurate.
Could you please share some more detail on your config? Like your mouse DPI and polling rate?
By the way anyone got a good keybinding for Melee?? I have mine on E and i find it abit offsetting for some weird reason.
By the way anyone got a good keybinding for Melee?? I have mine on E and i find it abit offsetting for some weird reason.
Same here [emoji1]By the way anyone got a good keybinding for Melee?? I have mine on E and i find it abit offsetting for some weird reason.
my melee key is always mouse thumb forward
(the front one of those side button on the mouse)
Can anyone please help me what is the difference between Hip activation key and other config activation key. For example, I have hip set up. Then I have a different config e.g "high dpi". If I had the activation key as '0'. How do I go back to "Hip" setting. I have set it on toggle but I can't see the difference if I pressed the activation key. I hope someone understands what I'm trying to say. I've got the new beta version
Sent from my E6653 using Tapatalk
Can anyone please help me what is the difference between Hip activation key and other config activation key. For example, I have hip set up. Then I have a different config e.g "high dpi". If I had the activation key as '0'. How do I go back to "Hip" setting. I have set it on toggle but I can't see the difference if I pressed the activation key. I hope someone understands what I'm trying to say. I've got the new beta version
Sent from my E6653 using Tapatalk
when you have set it as toggle itll mean your new config runs permanently when you click 0
when you click 0 again you are back to your original config :)
So last night I was playing Overwatch and I was destroying with Mcree and thought to myself "Hmm, my aim is pretty on point today". Then I realized I had the DPI on my Zowie FK2 set to 1600 instead of the max 3200. I switched to 3200 and suddenly my aim sucked...
So basically, aim feels much better at the lower DPI... why is that?
So last night I was playing Overwatch and I was destroying with Mcree and thought to myself "Hmm, my aim is pretty on point today". Then I realized I had the DPI on my Zowie FK2 set to 1600 instead of the max 3200. I switched to 3200 and suddenly my aim sucked...
So basically, aim feels much better at the lower DPI... why is that?
you probably have better aim with half the mouse speed is what i guess
Is the Overwatch St still plagued with issues or is it better now? I'm getting a xim 4 soon and I am really looking forward to using a mouse and keyboard.It's definitely usable. The problems are with the game's look mechanic and deadzone, which Blizzard has acknowledged and is in the process of being fixed.
Wow, I can't wait now! Is hanzo also viable with mouse and keyboard or only widow? Your bastion rank is really high too! I'll check out those settings when my xim4 comes in! Anything else you can reccomend? I'm getting the g303 so it'll use the same sensor as your g502 I believe.
Hello guys,
is there anyone that can share their shortcut setting for social interaction?
and also do we need any curve for this game?i find sometimes aim assist is distracting my crosshair
thank you
Honestly can't wait till all those aiming issues are fixed. This game is tons of fun but the aiming just ruins it right now. Still manage to do somewhat decent though.Is the Overwatch St still plagued with issues or is it better now? I'm getting a xim 4 soon and I am really looking forward to using a mouse and keyboard.It's definitely usable. The problems are with the game's look mechanic and deadzone, which Blizzard has acknowledged and is in the process of being fixed.
I use the default profile with no curves and run Widowmaker primarily. Widow and Bastion I feel are easiest to use with MKB. Widow for obvious reasons and Bastion because his sentry mode has the least aim assist of all the heroes.
However, you're probably better off playing the other heroes with a controller. Aim assist and the atrocious vertical and diagonal look mechanic can be pretty frustrating. Hopefully once this is fixed and the aim assist slider is included in the UI, MKB will be more viable.
I'm ranked #110 as Widow on PS4 at the time of writing this post. http://masteroverwatch.com/profile/psn/global/VideepVK
G502 @ 12,000 DPI / 1,000 Hz
15 Hip / 10 ADS
No Curve
Widow maker relative zoom sens @ 100
Sent from my XT1562 using Tapatalk
Is the Overwatch St still plagued with issues or is it better now? I'm getting a xim 4 soon and I am really looking forward to using a mouse and keyboard.It's definitely usable. The problems are with the game's look mechanic and deadzone, which Blizzard has acknowledged and is in the process of being fixed.
I use the default profile with no curves and run Widowmaker primarily. Widow and Bastion I feel are easiest to use with MKB. Widow for obvious reasons and Bastion because his sentry mode has the least aim assist of all the heroes.
However, you're probably better off playing the other heroes with a controller. Aim assist and the atrocious vertical and diagonal look mechanic can be pretty frustrating. Hopefully once this is fixed and the aim assist slider is included in the UI, MKB will be more viable.
I'm ranked #110 as Widow on PS4 at the time of writing this post. http://masteroverwatch.com/profile/psn/global/VideepVK
G502 @ 12,000 DPI / 1,000 Hz
15 Hip / 10 ADS
No Curve
Widow maker relative zoom sens @ 100
Sent from my XT1562 using Tapatalk
Do you have any solo game-play videos as widow? I feel like some MLG pro when I play with my group of friends, but when I play solo Im pretty terrible... How well you do makes a difference based on your team for sure since you have more support. http://masteroverwatch.com/profile/xbl/global/MetalxTempest
Do you have any solo game-play videos as widow? I feel like some MLG pro when I play with my group of friends, but when I play solo Im pretty terrible... How well you do makes a difference based on your team for sure since you have more support. http://masteroverwatch.com/profile/xbl/global/MetalxTempest
I've got some on my PS4 DVR - will post a link here once I've had a chance to upload them. But largely, yes, definitely helps to play with a pre-made with someone watching flanks, warning with call outs, etc.
Good to see you're making Hanzo work! I've barely played him since the open beta. Any tips on making him work with the XIM (crosshairs/curves/sensitivity)?
I also did not mean what I said to seem insulting to your statistics, I just think people are too quick to see stats here and think someone has "the best" Xim settings to use. This is why videos are useful...you can observe the mouse. If you play with 5 other friends you'll do better than playing solo most of the time which will make you think your Xim settings are great. Then you play solo and lose 9 games in a row... does that mean your settings are bad? Many variables here in this game...I hope people understand. Looking forward to your videos will gladly watch!
any news yet on when the update comes out?
they said this month a while ago but it seems like thats no longer a thing
couldnt find any news updates since then :/
any news yet on when the update comes out?
they said this month a while ago but it seems like thats no longer a thing
couldnt find any news updates since then :/
Last time I looked, they were saying mid to late July.
I'm kind of nervous that they didn't mention AA in a while. I understand that the vertical/diagonal aiming is terrble but the AA is a bigger problem for me (I'm trying to enjoy classes like Tracer and Pharah and simply can't).
Is the Overwatch St still plagued with issues or is it better now? I'm getting a xim 4 soon and I am really looking forward to using a mouse and keyboard..
I'm ranked #110 as Widow on PS4 at the time of writing this post. http://masteroverwatch.com/profile/psn/global/VideepVK
G502 @ 12,000 DPI / 1,000 Hz
15 Hip / 10 ADS
No Curve
Widow maker relative zoom sens @ 100
Sent from my XT1562 using Tapatalk
You're clearly a better player than I am. My intention was not to gloat but to merely say that while not ideal, Overwatch is playable on console with MKB.Is the Overwatch St still plagued with issues or is it better now? I'm getting a xim 4 soon and I am really looking forward to using a mouse and keyboard..
I'm ranked #110 as Widow on PS4 at the time of writing this post. http://masteroverwatch.com/profile/psn/global/VideepVK
G502 @ 12,000 DPI / 1,000 Hz
15 Hip / 10 ADS
No Curve
Widow maker relative zoom sens @ 100
Sent from my XT1562 using Tapatalk
Sorry to say but this rank is based on time played. not to mention you only have an accuracy score of 33% coupled with a win rate of 60ish %... this is kind of weak for a mouse using Widow mate..
I place top 50 as Mccree (based on time played and not skill) and top 70 as Mcree SPM (based on skill) and currently ranked 31st globally on XBOX (based on skill) for winrate and I've gone back to a controller because this game doesn't work correctly with a Mouse and keyboard.
Is the Overwatch St still plagued with issues or is it better now? I'm getting a xim 4 soon and I am really looking forward to using a mouse and keyboard..
I'm ranked #110 as Widow on PS4 at the time of writing this post. http://masteroverwatch.com/profile/psn/global/VideepVK
G502 @ 12,000 DPI / 1,000 Hz
15 Hip / 10 ADS
No Curve
Widow maker relative zoom sens @ 100
Sent from my XT1562 using Tapatalk
Sorry to say but this rank is based on time played. not to mention you only have an accuracy score of 33% coupled with a win rate of 60ish %... this is kind of weak for a mouse using Widow mate..
I place top 50 as Mccree (based on time played and not skill) and top 70 as Mcree SPM (based on skill) and currently ranked 31st globally on XBOX (based on skill) for winrate and I've gone back to a controller because this game doesn't work correctly with a Mouse and keyboard.
Is the Overwatch St still plagued with issues or is it better now? I'm getting a xim 4 soon and I am really looking forward to using a mouse and keyboard..
I'm ranked #110 as Widow on PS4 at the time of writing this post. http://masteroverwatch.com/profile/psn/global/VideepVK
G502 @ 12,000 DPI / 1,000 Hz
15 Hip / 10 ADS
No Curve
Widow maker relative zoom sens @ 100
Sent from my XT1562 using Tapatalk
Sorry to say but this rank is based on time played. not to mention you only have an accuracy score of 33% coupled with a win rate of 60ish %... this is kind of weak for a mouse using Widow mate..
I place top 50 as Mccree (based on time played and not skill) and top 70 as Mcree SPM (based on skill) and currently ranked 31st globally on XBOX (based on skill) for winrate and I've gone back to a controller because this game doesn't work correctly with a Mouse and keyboard.
What's your gamertag?
Is the Overwatch St still plagued with issues or is it better now? I'm getting a xim 4 soon and I am really looking forward to using a mouse and keyboard..
I'm ranked #110 as Widow on PS4 at the time of writing this post. http://masteroverwatch.com/profile/psn/global/VideepVK
G502 @ 12,000 DPI / 1,000 Hz
15 Hip / 10 ADS
No Curve
Widow maker relative zoom sens @ 100
Sent from my XT1562 using Tapatalk
Sorry to say but this rank is based on time played. not to mention you only have an accuracy score of 33% coupled with a win rate of 60ish %... this is kind of weak for a mouse using Widow mate..
I place top 50 as Mccree (based on time played and not skill) and top 70 as Mcree SPM (based on skill) and currently ranked 31st globally on XBOX (based on skill) for winrate and I've gone back to a controller because this game doesn't work correctly with a Mouse and keyboard.
What's your gamertag?
shouldn't really matter but http://masteroverwatch.com/profile/xbl/global/Karma%20And%20Chaos (http://masteroverwatch.com/profile/xbl/global/Karma%20And%20Chaos)
I tried the XIM out for a full day when the official ST released and it's simply unusable. I've tried various different configs settings, curves, ST1 & ST2 etc and it's a simple fact that this game on console is only good with a controller.... I'm sure it's down to the @#$% looking mechanics but either way.. use a controller over the XIM for this game if you can..
I'm not knocking the XIM - it works wonders for games like COD.. but simply put Overwatches looking mechanics have a negative impact on my playing experience when using a KBM
I wish I could use a KBM... could you imagine what could be done?!
Is the Overwatch St still plagued with issues or is it better now? I'm getting a xim 4 soon and I am really looking forward to using a mouse and keyboard..
I'm ranked #110 as Widow on PS4 at the time of writing this post. http://masteroverwatch.com/profile/psn/global/VideepVK
G502 @ 12,000 DPI / 1,000 Hz
15 Hip / 10 ADS
No Curve
Widow maker relative zoom sens @ 100
Sent from my XT1562 using Tapatalk
Sorry to say but this rank is based on time played. not to mention you only have an accuracy score of 33% coupled with a win rate of 60ish %... this is kind of weak for a mouse using Widow mate..
I place top 50 as Mccree (based on time played and not skill) and top 70 as Mcree SPM (based on skill) and currently ranked 31st globally on XBOX (based on skill) for winrate and I've gone back to a controller because this game doesn't work correctly with a Mouse and keyboard.
What's your gamertag?
shouldn't really matter but http://masteroverwatch.com/profile/xbl/global/Karma%20And%20Chaos (http://masteroverwatch.com/profile/xbl/global/Karma%20And%20Chaos)
I tried the XIM out for a full day when the official ST released and it's simply unusable. I've tried various different configs settings, curves, ST1 & ST2 etc and it's a simple fact that this game on console is only good with a controller.... I'm sure it's down to the @#$% looking mechanics but either way.. use a controller over the XIM for this game if you can..
I'm not knocking the XIM - it works wonders for games like COD.. but simply put Overwatches looking mechanics have a negative impact on my playing experience when using a KBM
I wish I could use a KBM... could you imagine what could be done?!
You're that gamer girl from Destiny? You're pretty good, and on my friends list, no idea you used a Xim. Can you post some gameplay videos?
Is the Overwatch St still plagued with issues or is it better now? I'm getting a xim 4 soon and I am really looking forward to using a mouse and keyboard..
I'm ranked #110 as Widow on PS4 at the time of writing this post. http://masteroverwatch.com/profile/psn/global/VideepVK
G502 @ 12,000 DPI / 1,000 Hz
15 Hip / 10 ADS
No Curve
Widow maker relative zoom sens @ 100
Sent from my XT1562 using Tapatalk
Sorry to say but this rank is based on time played. not to mention you only have an accuracy score of 33% coupled with a win rate of 60ish %... this is kind of weak for a mouse using Widow mate..
I place top 50 as Mccree (based on time played and not skill) and top 70 as Mcree SPM (based on skill) and currently ranked 31st globally on XBOX (based on skill) for winrate and I've gone back to a controller because this game doesn't work correctly with a Mouse and keyboard.
What's your gamertag?
shouldn't really matter but http://masteroverwatch.com/profile/xbl/global/Karma%20And%20Chaos (http://masteroverwatch.com/profile/xbl/global/Karma%20And%20Chaos)
I tried the XIM out for a full day when the official ST released and it's simply unusable. I've tried various different configs settings, curves, ST1 & ST2 etc and it's a simple fact that this game on console is only good with a controller.... I'm sure it's down to the @#$% looking mechanics but either way.. use a controller over the XIM for this game if you can..
I'm not knocking the XIM - it works wonders for games like COD.. but simply put Overwatches looking mechanics have a negative impact on my playing experience when using a KBM
I wish I could use a KBM... could you imagine what could be done?!
You're that gamer girl from Destiny? You're pretty good, and on my friends list, no idea you used a Xim. Can you post some gameplay videos?
umm, defo not a girl and 2nd. I don't use a XIM that was my point - I purchased one back at the beginning of May for Overwatch and it doesn't work so it's in its box until either a. the profile for this game gets better or b. a better game comes out where i can be used!
as i said before I've use a XIm for about 12 hours with no success and it went back in the box and the elite controller took its place.
Is the Overwatch St still plagued with issues or is it better now? I'm getting a xim 4 soon and I am really looking forward to using a mouse and keyboard..
I'm ranked #110 as Widow on PS4 at the time of writing this post. http://masteroverwatch.com/profile/psn/global/VideepVK
G502 @ 12,000 DPI / 1,000 Hz
15 Hip / 10 ADS
No Curve
Widow maker relative zoom sens @ 100
Sent from my XT1562 using Tapatalk
Sorry to say but this rank is based on time played. not to mention you only have an accuracy score of 33% coupled with a win rate of 60ish %... this is kind of weak for a mouse using Widow mate..
I place top 50 as Mccree (based on time played and not skill) and top 70 as Mcree SPM (based on skill) and currently ranked 31st globally on XBOX (based on skill) for winrate and I've gone back to a controller because this game doesn't work correctly with a Mouse and keyboard.
What's your gamertag?
shouldn't really matter but http://masteroverwatch.com/profile/xbl/global/Karma%20And%20Chaos (http://masteroverwatch.com/profile/xbl/global/Karma%20And%20Chaos)
I tried the XIM out for a full day when the official ST released and it's simply unusable. I've tried various different configs settings, curves, ST1 & ST2 etc and it's a simple fact that this game on console is only good with a controller.... I'm sure it's down to the @#$% looking mechanics but either way.. use a controller over the XIM for this game if you can..
I'm not knocking the XIM - it works wonders for games like COD.. but simply put Overwatches looking mechanics have a negative impact on my playing experience when using a KBM
I wish I could use a KBM... could you imagine what could be done?!
You're that gamer girl from Destiny? You're pretty good, and on my friends list, no idea you used a Xim. Can you post some gameplay videos?
umm, defo not a girl and 2nd. I don't use a XIM that was my point - I purchased one back at the beginning of May for Overwatch and it doesn't work so it's in its box until either a. the profile for this game gets better or b. a better game comes out where i can be used!
as i said before I've use a XIm for about 12 hours with no success and it went back in the box and the elite controller took its place.
Oh sorry!! All of your destiny characters were females so that's what I assumed. No videos though? I don't see many top tier McCrees on console and would love to check it out. I'm getting bored of Hanzo.
Sorry for being so dumb, but where do yall see DPI/HZ settings in xim4??
All I see is hip sensitivity and that's it. I put it on 110...seems fine. Haven't tried the in the real game yet oly on target practice, still waiting for my new keyboard to arrive, but would like to know more about mouse settings. Thanks.
a new ST has to be made, then it will feel perfect again :)
I don't know if it's just me but I think I'm at crazy high numbers through the xim app and I still feel somewhat slow. I can't make a full 360 and when I have to move around behind and to the rear and then front again I feel like I'm moving my mouse off my mouse pad and it gets me killed.
I have 120 xim sensitivity
My x/y is at a 3.O
My mouse is a razor naga (2.0 I think) and I max the dpi from the mouse..
I want to get it like the Korean pros where you can snap behind you then to front with no problem. Anyone have any crazy settings used by pros ?
Any news about a new st??
Inviato dal mio SM-G935F utilizzando Tapatalk
I thought there's no Ads on overwatch St
Sent from my E6653 using Tapatalk
Curious to know if anyone still has any difficulty tracking pharahs.
So far my settings are pretty basic:
Logitech G502
DPI 12000
Sensitivity: 25
Polling: 500 hz
In-game aim assist: 100%
This has been working for me so far. I've been playing a lot of soldier 76 lately and my KD in ranked is 3.91 with around a 35% accuracy. I'm pretty happy with the results. Anyone have any suggestions?
I'm familiar with the advanced settings of the xim but preferred not to change anything for overwatch. Loving the new ST :)
My latest profile:
Mouse DPI: 5600 (before 8200)
- 500Hz and 1000Hz tick interchangeably, I can't notice a difference
In-game vert/horiz sensitivity: 100
In-game Aim Assist strenght: 0
Xim HIP sensitivity: 22 (was 16 at 8200DPI)
Xim ADS sensitivity: 15 (was 11 at 8200DPI)
In-game Widowmaker relative sensitivity: 100
- I am stumbling up and down from 44% to 100% of my 22 Hip sensitivity. Right now at 15 (69% of 22) I am hitting a lot of twitchy drag shots but I also underaim or overaim all over the place... 'thanks' to the weird look and acceleration of this game it is very hard to reliably predict where your scope will end up on a drag shot.
Xim ADS curve, boost, x/y, steady-aim: none, defaults
Xim HIP boost, x/y, steady-aim: none, defaults
Xim HIP curve: linear aim, faster turnCode: [Select]>>> XIM4 [Mouse Ballistics] START PASTE >>>
(http://i.imgur.com/wOxEsSk.jpg)
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANQAwADgAMQA2AAoUHigyPElacIupyMjIyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
got a G502 for testing today, but still struggeling with the right sens. At the moment i'm using something between 9-15 sens (12000dpi, 500hz) with 0-50 aim assist. Still testing around.PC :)
What are you guys using?
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAoUHigyPEZQUFBQUFBQUFBQUFBQ:X4MB
<<< XIM4 END PASTE <<<
4000 dpi with 200 on hip? Wow that's too much bro. I'm at 6000 dpi with 36 hip. And I still find a bit too fast when using soldier 76If I use high dpi mouse, will the problem be solved? I mean increasing the dpi and redusing the hip.
Sent from my E6653 using Tapatalk
U can always tryThe maximum dpi of my G402 is 4000. I would like to know if there is any different on the higher dpi Logitech G502 before I buy one.
Sent from my E6653 using Tapatalk
U can always tryThe maximum dpi of my G402 is 4000. I would like to know if there is any different on the higher dpi Logitech G502 before I buy one.
Sent from my E6653 using Tapatalk
U can always tryThe maximum dpi of my G402 is 4000. I would like to know if there is any different on the higher dpi Logitech G502 before I buy one.
Sent from my E6653 using Tapatalk
You should try using the curve I posted above. I think you will find that 200 to be extremely high with the curve on. But it should prevent you from red dotting (going past max turn speed) which you seem to be doing a lot of. That is why you are feeling your aim slow to a crawl.4000 dpi with 200 on hip? Wow that's too much bro. I'm at 6000 dpi with 36 hip. And I still find a bit too fast when using soldier 76If I use high dpi mouse, will the problem be solved? I mean increasing the dpi and redusing the hip.
Sent from my E6653 using Tapatalk
Alright guys,I believe you.
Wanted to post a curve that I have been having some success with the last couple of days. When you input the curve you will notice that it pretty much cuts off at 40.
@xeem4ovwThank you! Do you use your G502 exclusively for the XIM4 or you switch between PC and XIM4? If so, is the only way to do it to constantly switch between profiles of an onboard memory // onboard vs application in LGS manually? 12000 on PC is a disaster :)
you could try this:
-sens ingame both 100, i didn't touch the scoop sens and I play sometimes widowmaker
-aim assist 0-50 (I'm still testing on this, atm I have 50)
-G502 profile with 12000dpi, 500hz, trained to my mousepad (have a look that you save the settings on the mouse)
- Sens on XIM 14,4 - no curve or anything else
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANQAxADEAMgAwAAQJDRIXGyAkKS4yNztARUlOUldc:X4MB
<<< XIM4 END PASTE <<<
Based on work from gunit2004 and AkS0n- here's a curve to try.
I don't know what is going on with this game and its acceleration, this right here is the best movement and aiming feel the game ever had for me.
About double your current sensitivity when testing this curve if you used default curve before, or the one from gunit2004:Code: [Select]>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANQAxADEAMgAwAAQJDRIXGyAkKS4yNztARUlOUldc:X4MB
<<< XIM4 END PASTE <<<
It goes to 46 not 40. It will look like the equivalent of this in your manager:
what firmware are you using?
Ok guys. Been MIA for a bit but I finally dialed in my settings that worked fantastic for me.
G502
8200 DPI
1,000 poll
Using same old RML Destiny curve
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AA8eLTxLW2VveYONl6Grtb/IyMjI:X4MB
<<< XIM4 END PASTE <<<
20160405 FIRMWARE
HIP : 11
All characters aim assist is set to 90. Pharah at 70, MCCree at 100
Steady Aim ON
Widowmaker - will get back to you I just shut it off lol my bad. Still no ADS profile for her.
Try it out. Let me know if it helps. It's helped two of my good PS4 buds so I figure I'd share what's worked for me.
Catch my streams over at twitch.tv/SugahFree_
G502 + Orbweaver (curious what yall using KB)
It goes to 46 not 40. It will look like the equivalent of this in your manager:Gonna have to redo sensitivity one last time. Was extremely happy w/ 40.0 and went back & forth keeping sensitivity same but... yeah just knowing. I cant keep 40.0
(http://i.imgur.com/wXOEW95.jpg)
Out of all the things I have tried for Overwatch, the single biggest improvement was me ditching the TV and hooking up my old 2ms samsung lcd monitor. I'm now using 12000 dpi, 1000hz poll, no curves, and it feels great. I don't know why I didnt hook this up before, seriously big improvement in the xim across the board.That is due to input lag. Which is extremely complicated and varies depending on which TV or Monitor and settings you are using.
Ok guys. Been MIA for a bit but I finally dialed in my settings that worked fantastic for me.Going to try your setting.
G502
8200 DPI
1,000 poll
Using same old RML Destiny curve
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AA8eLTxLW2VveYONl6Grtb/IyMjI:X4MB
<<< XIM4 END PASTE <<<
20160405 FIRMWARE
HIP : 11
All characters aim assist is set to 90. Pharah at 70, MCCree at 100
Steady Aim ON
Widowmaker - will get back to you I just shut it off lol my bad. Still no ADS profile for her.
Try it out. Let me know if it helps. It's helped two of my good PS4 buds so I figure I'd share what's worked for me.
Catch my streams over at twitch.tv/SugahFree_
Hello, a stupid question: I am not able to use the rapid menu with xim 4; I can't make emotion or ask life, some one can help me, thanks. Sorry for my bad englishbind the key on F or 2.
Hello, a stupid question: I am not able to use the rapid menu with xim 4; I can't make emotion or ask life, some one can help me, thanks. Sorry for my bad englishYou could also add a 2nd page, set Activation Key, turn off mouse control, and just use D-Pad or Analog over mouse to select. I use an Orbweaver D-Pad and find it less bothersome than selecting with a mouse.
Quick question - how do I know if I'm on the new ST? ST 2?
I've been on vacation for 2 weeks... and just started playing again tonight. =)
I got 60 elimination 19,000 demage 40 final shot in a rank yesterdays with 76, verything seems good,my setting here:How did you do that??
12,000dpi, 1000pull
latest beta vision(steady aim)0624
sensitivity:40
boost:80
steady aim on
curve:
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAoUHigyPEZQWmRobHB0eHyAhIiM:X4MB
<<< XIM4 END PASTE <<<
in game setting:
aim assist 70~80
Holy crap Henry that curve is amazing, i had to change my sense because I also play 12k 1k but I can actually use aim assist with the curve! I played with 0 usually with default I dont know what this curve does, but it's magic. I tried soldier in qp right now and the buffed mcree raged at me and sent me a pm "nice scuf bro" oohhhh if only he knew!this curve must work the aim assist, hope you like it
I got 60 elimination 19,000 demage 40 final shot in a rank yesterdays with 76, verything seems good,my setting here:
12,000dpi, 1000pull
latest beta vision(steady aim)0624
sensitivity:40
boost:80
steady aim on
curve:
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAoUHigyPEZQWmRobHB0eHyAhIiM:X4MB
<<< XIM4 END PASTE <<<
in game setting:
aim assist 70~80
I got 60 elimination 19,000 demage 40 final shot in a rank yesterdays with 76, verything seems good,my setting here:
12,000dpi, 1000pull
latest beta vision(steady aim)0624
sensitivity:40
boost:80
steady aim on
curve:
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAoUHigyPEZQWmRobHB0eHyAhIiM:X4MB
<<< XIM4 END PASTE <<<
in game setting:
aim assist 70~80
I got 60 elimination 19,000 demage 40 final shot in a rank yesterdays with 76, verything seems good,my setting here:
12,000dpi, 1000pull
latest beta vision(steady aim)0624
sensitivity:40
boost:80
steady aim on
curve:
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAoUHigyPEZQWmRobHB0eHyAhIiM:X4MB
<<< XIM4 END PASTE <<<
in game setting:
aim assist 70~80
But when i play with this curve my light on the xim is often red, why?
yes but I cant say it's good and this hero not good now, you can try macreeI got 60 elimination 19,000 demage 40 final shot in a rank yesterdays with 76, verything seems good,my setting here:
12,000dpi, 1000pull
latest beta vision(steady aim)0624
sensitivity:40
boost:80
steady aim on
curve:
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAoUHigyPEZQWmRobHB0eHyAhIiM:X4MB
<<< XIM4 END PASTE <<<
in game setting:
aim assist 70~80
Do you have a curve for Widowmaker?
I got 60 elimination 19,000 demage 40 final shot in a rank yesterdays with 76, verything seems good,my setting here:
12,000dpi, 1000pull
latest beta vision(steady aim)0624
sensitivity:40
boost:80
steady aim on
curve:
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAoUHigyPEZQWmRobHB0eHyAhIiM:X4MB
<<< XIM4 END PASTE <<<
in game setting:
aim assist 70~80
I got 60 elimination 19,000 demage 40 final shot in a rank yesterdays with 76, verything seems good,my setting here:
12,000dpi, 1000pull
latest beta vision(steady aim)0624
sensitivity:40
boost:80
steady aim on
curve:
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAoUHigyPEZQWmRobHB0eHyAhIiM:X4MB
<<< XIM4 END PASTE <<<
in game setting:
aim assist 70~80
This is hacks, lock it up. ;)
This curve had me disappointed at first. What I experienced using it was that you almost have to be using a high aim assist or it performs poorly. When I first switched to this curve and played with, Mccree (who I had at 10% aim assist), I was experiencing reticle knock back off enemy hit boxes. I then bumped the aim assist up to 75% and it was aim assist city, the reticle was sucking in on players like cod.
Great curve for hit scan heroes.
I don't know about the 40 sensitivity though, I went with 9.5
is the rml curve and steady aim important for Overwatch? i saw an Pharah Video on Youtube and his settings are Black Ops RML Hip Curve and Steady Aim on.
I got 60 elimination 19,000 demage 40 final shot in a rank yesterdays with 76, verything seems good,my setting here:
12,000dpi, 1000pull
latest beta vision(steady aim)0624
sensitivity:40
boost:80
steady aim on
curve:
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAoUHigyPEZQWmRobHB0eHyAhIiM:X4MB
<<< XIM4 END PASTE <<<
in game setting:
aim assist 70~80
im happy you like it
Opinion:
I can't make henry's settings work for me at all. 12kdpi, 40 sensitivity and 80 boost throws my crosshair all over the screen with very little movement on my end. I could see making it work for you on fast-quick turning or close range heroes such as reaper, dva, and tracer.
I use humanfemale setting as I find them pretty smooth for hitscan heroes.
I got 60 elimination 19,000 demage 40 final shot in a rank yesterdays with 76, verything seems good,my setting here:
12,000dpi, 1000pull
latest beta vision(steady aim)0624
sensitivity:40
boost:80
steady aim on
curve:
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAoUHigyPEZQWmRobHB0eHyAhIiM:X4MB
<<< XIM4 END PASTE <<<
in game setting:
aim assist 70~80
So I tried Henry's curve and like it. Wasn't using a curve before and was doing well, but had some trouble consistently hitting pharah while playing 76. Will see if this curve helps.
Two questions: Do most folks use steady aim? What exactly does it do in Overwatch?
Another question: What does Henry's curve do in theory?
I got 60 elimination 19,000 demage 40 final shot in a rank yesterdays with 76, verything seems good,my setting here:
12,000dpi, 1000pull
latest beta vision(steady aim)0624
sensitivity:40
boost:80
steady aim on
curve:
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAoUHigyPEZQWmRobHB0eHyAhIiM:X4MB
<<< XIM4 END PASTE <<<
in game setting:
aim assist 70~80
I would really like to try this setup, however i can't find a place to download the latest beta version(steady aim)0624
Could anybody help me out?
tried Henrys curve too and i like it, makes longer/faster mouse movements more predictable since the timed acceleration is toned down by it
Hey guys just wondering if any of you could post a screenshot of what your advanced mouse settings look like with Henry's curve? Thanks a ton!Copy and paste the config. Bottom left corner of the curve.
using henrys curve and exact settings and 12kdpi mouse.. i can not kill anything i dont understand why
using henrys curve and exact settings and 12kdpi mouse.. i can not kill anything i dont understand why
I got 60 elimination 19,000 demage 40 final shot in a rank yesterdays with 76, verything seems good,my setting here:
12,000dpi, 1000pull
latest beta vision(steady aim)0624
sensitivity:40
boost:80
steady aim on
curve:
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAoUHigyPEZQWmRobHB0eHyAhIiM:X4MB
<<< XIM4 END PASTE <<<
in game setting:
aim assist 70~80
Doh. Well, can someone explain how to "install" a curve?
I got 60 elimination 19,000 demage 40 final shot in a rank yesterdays with 76, verything seems good,my setting here:Hi guys, just tried some new stuff, make the sensitivity to 20 aim assist 70 ,this will seems more smooth. I got 95% accuracy with Roadhog in a match 20 enemies hooked.
12,000dpi, 1000pull
latest beta vision(steady aim)0624
sensitivity:40
boost:80
steady aim on
curve:
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAoUHigyPEZQWmRobHB0eHyAhIiM:X4MB
<<< XIM4 END PASTE <<<
in game setting:
aim assist 70~80
the latest beta firm 0624I got 60 elimination 19,000 demage 40 final shot in a rank yesterdays with 76, verything seems good,my setting here:
12,000dpi, 1000pull
latest beta vision(steady aim)0624
sensitivity:40
boost:80
steady aim on
curve:
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAoUHigyPEZQWmRobHB0eHyAhIiM:X4MB
<<< XIM4 END PASTE <<<
in game setting:
aim assist 70~80
Hei,
Noob question, does this curve work with the latest firmware 20160405?
Or do I need to install the "beta vision" Henry is talking about? If so, where can I get that version?
Thanks!
Seen many references to Henry's curve. Can someone post for reference?just copy the curve and past it to your XIM manager
Also, can someone explain how to install a curve?
it should works with every hero.I got 60 elimination 19,000 demage 40 final shot in a rank yesterdays with 76, verything seems good,my setting here:
12,000dpi, 1000pull
latest beta vision(steady aim)0624
sensitivity:40
boost:80
steady aim on
curve:
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAoUHigyPEZQWmRobHB0eHyAhIiM:X4MB
<<< XIM4 END PASTE <<<
in game setting:
aim assist 70~80
Might be a dumb question to ask but I main D.Va, Roadhog and Ana. Will this work for them?
Has anyone compared Henry's to humanfemale's curve? - http://xim4.com/community/index.php?topic=47953.0maybe two things, my curve goes for aim assist and i see humanfemale always turn the aim assist off.
For the people saying it works so well... I'm at a loss.
Lowering the DPI and Tick Rate helped getting rid of some of the stuttering but I still get excessive aim assist when I look in the general direction of an enemy.
For comparison, Destiny has aim assist but it is far less intrusive than The Division and Overwatch.
At this point, I might just try to play the game with a controller and try to compare how the game feels.
I have just recently purchased a XIM4 and set it up today. I wanted to hear some feedback from people who now know exactly what they are doing and things they wish they knew when they first got the XIM4. First, I use XIM4 for Overwatch. I am very used to using a keyboard and mouse, however I am having difficulty finding a good starting point settings wise. Would someone who plays Overwatch please share with me their settings and any information that would be good for a novice user?
it should works with every hero.I got 60 elimination 19,000 demage 40 final shot in a rank yesterdays with 76, verything seems good,my setting here:
12,000dpi, 1000pull
latest beta vision(steady aim)0624
sensitivity:40
boost:80
steady aim on
curve:
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAoUHigyPEZQWmRobHB0eHyAhIiM:X4MB
<<< XIM4 END PASTE <<<
in game setting:
aim assist 70~80
Might be a dumb question to ask but I main D.Va, Roadhog and Ana. Will this work for them?
So whats our best choice then?
So, according to this, what should be in game vertical and horizontal sensivity?
I've tried the default curve (i.e. no curve) with a variety of DPIs and HIP sensitivity. What I found is that you need to go down to 5-10 with the default curve to avoid the jitters.this curve needs to work with the aim assist,just set to 70~80
I then tried Henry's curve, and no matter the mouse sense, no jitters. I, however, have turned aim assist to 20, and use HIP sens of 9-10 and boost at 50 with steady aim. I have not tried humanefemale's curve, yet.
I wonder two things:
(1) with herny's curve, should you have aim assist at 70-80, or not. I've tried it both ways, and can't tell a difference. From what I've seen about OW aim assist, it seems like it may hurt trying to tract targets. Does anyone have any anecdotal stories that they can share about this?
(2) how is humanefemale's curve vs. henry's curve with heroes like Genji, and Tracer?
Mouse Logitech G502HOw do you change these settings? is it in the config or is this a mouse setting in the pc..if so how do i get there..please be detailed
500polling, 12,000 DPI
XIM4 settings.
HIP - 15.
these settings are gold for me.
If anyone has a better settings than this pls let me know, someone else might have platinum or diamond lol
I have a basic Microsoft Mouse, is there any point for me to buy a Xim4 or will I need to upgrade my mouse first?
Thinking of using it for Overwatch, how good does it get? Seems to be a quite problematic to get good settings?
Mouse Logitech G502HOw do you change these settings? is it in the config or is this a mouse setting in the pc..if so how do i get there..please be detailed
500polling, 12,000 DPI
XIM4 settings.
HIP - 15.
these settings are gold for me.
If anyone has a better settings than this pls let me know, someone else might have platinum or diamond lol
Can someone help me with my settings? I'm new to using the XIM4, and new to using keyboard and mouse controls in general. It seems like I have a vastly different setup from everyone else.
Mouse & Keyboard: Cooler Master Devastator II
DPI: 2000
HIP Sensitivity: 175
ADS: 200
Boost: 1600
In-Game Sensitivity: 100
In-Game Aim-Assist: 0
Everything else is set to default.
I've noticed my sensitivity seems to be way higher than everyone else's. But I'm guessing that's a result of my mouse having a lower DPI. I've tried playing at around 100 initially, but it seemed way too slow. I had it as high as 275 at one point because it seemed like the game still wasn't fully responding to my mouse movements. (Although, this was before I knew about the boost setting.)
I still feel like something is off with my settings though, especially whenever I try out a sniper like Ana or Widowmaker. I feel like I can't hit anything unless it's completely still. I end up playing Lucio most of the time and simply not caring about my aim; which in retrospect, makes using the XIM4 feel kind of pointless.
Does anyone have any recommendations? I know I need more practice for sure, but aiming feels wrong in this game with the XIM4. Also I should mention my crosshairs seem to jitter around sometimes, which I presume is a bad thing.
Having tried humanfemales and henry's curve, I've been just using no curve at all for a few games and been doing very well. I've been mainly playing Tracer, that means I need the movement to be unrestricted, and I need the time based acceleration built in or I can't turn fast enough.
http://xboxdvr.com/gamer/Sensational/video/20924046
Here's some gameplay - I've come gold in damage in 90% of the games I've played and basically carried in terms of eliminations.
Mouse: Zowie ZA11 @ 1600dpi
FW: latest non steadyaimboost drop
No curve
45 Sensitivity
1500 boost
30 aim assist
I've tried so many settings, curves etc from this thread many hours and i must say its hard to find out which one is the best...they re some like the same..have still Problems to Hit flying pharahs..
Everyone want the best overwatch setting/curve but meanwhile i think there is no best setting for this game. Blizzard change the turnspeed on porpuse. Sorry for my bad english.
I've made a new breakthrough in terms of curves for Overwatch.
Using the standard STV2 Latest firmware(not the beta drop which changes the curve ratio), the 1:1 movement stops at 44.9. If you map all movement linearly to 44.9%, the have 4 plots after that ramp to 100% you get the both of both worlds in terms of movement and accuracy.
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAYMExkgJi0zOUBGTVNZyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
Here is an example of the curve. I'm still tuning exactly where you should have the jump to 100, it would definitely be personal preference, depends on your sensitivity too. I'm currently trying 27 sens, 3200DPI with the curve above and reking as every character using 15 aim assist in game. Give it a try and let me know how it feels for you. I'm using no boost as well.
I've tried so many settings, curves etc from this thread many hours and i must say its hard to find out which one is the best...they re some like the same..have still Problems to Hit flying pharahs..
Everyone want the best overwatch setting/curve but meanwhile i think there is no best setting for this game. Blizzard change the turnspeed on porpuse. Sorry for my bad english.
I've made a new breakthrough in terms of curves for Overwatch.
Using the standard STV2 Latest firmware(not the beta drop which changes the curve ratio), the 1:1 movement stops at 44.9. If you map all movement linearly to 44.9%, the have 4 plots after that ramp to 100% you get the both of both worlds in terms of movement and accuracy.
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAYMExkgJi0zOUBGTVNZyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
Here is an example of the curve. I'm still tuning exactly where you should have the jump to 100, it would definitely be personal preference, depends on your sensitivity too. I'm currently trying 27 sens, 3200DPI with the curve above and reking as every character using 15 aim assist in game. Give it a try and let me know how it feels for you. I'm using no boost as well.
I've made a new breakthrough in terms of curves for Overwatch.
Using the standard STV2 Latest firmware(not the beta drop which changes the curve ratio), the 1:1 movement stops at 44.9. If you map all movement linearly to 44.9%, the have 4 plots after that ramp to 100% you get the both of both worlds in terms of movement and accuracy.
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAYMExkgJi0zOUBGTVNZyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
Here is an example of the curve. I'm still tuning exactly where you should have the jump to 100, it would definitely be personal preference, depends on your sensitivity too. I'm currently trying 27 sens, 3200DPI with the curve above and reking as every character using 15 aim assist in game. Give it a try and let me know how it feels for you. I'm using no boost as well.
I've made a new breakthrough in terms of curves for Overwatch.
Using the standard STV2 Latest firmware(not the beta drop which changes the curve ratio), the 1:1 movement stops at 44.9. If you map all movement linearly to 44.9%, the have 4 plots after that ramp to 100% you get the both of both worlds in terms of movement and accuracy.
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAYMExkgJi0zOUBGTVNZyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
Here is an example of the curve. I'm still tuning exactly where you should have the jump to 100, it would definitely be personal preference, depends on your sensitivity too. I'm currently trying 27 sens, 3200DPI with the curve above and reking as every character using 15 aim assist in game. Give it a try and let me know how it feels for you. I'm using no boost as well.
I've made a new breakthrough in terms of curves for Overwatch.
Using the standard STV2 Latest firmware(not the beta drop which changes the curve ratio), the 1:1 movement stops at 44.9. If you map all movement linearly to 44.9%, the have 4 plots after that ramp to 100% you get the both of both worlds in terms of movement and accuracy.
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAYMExkgJi0zOUBGTVNZyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
Here is an example of the curve. I'm still tuning exactly where you should have the jump to 100, it would definitely be personal preference, depends on your sensitivity too. I'm currently trying 27 sens, 3200DPI with the curve above and reking as every character using 15 aim assist in game. Give it a try and let me know how it feels for you. I'm using no boost as well.
hmmm okay no I have to correct myself. As u said, personal preferences :) I changes it all a bit and now it feels better :)
I would love to hear more from you if u keep improving ur tracer settings :) !
Sent from my iPhone using Tapatalk
Don't expect it to make you a god instantly, I still find it hard to attack airborne targets, genjis, lucios up close, but with a bit of practice you can get gold damage and elims every game with this curve as I've been doing.
Hey guys
#Beam1mpact and me are very proud to present you the best possible widowmaker config.
#Im using the firmware 20160624-Steadyaim1.exe
#We worked on it around 2 weeks finally ive found my perfect settings i got like every 1-2 Games PotG easily the accuracy is straight on around 50-60% what is really impressive if you check the overall Widow Accuracy in the world. (38%)
#Feel free to give any improves or tipps this is meant to be shared for all xim4 users in the world.
#Check out this Videos:
https://www.youtube.com/watch?v=Dm0xvEEImhI
https://www.youtube.com/watch?v=UIeSa0fYuws
https://www.youtube.com/watch?v=nWAmmS7r1pE
https://www.youtube.com/watch?v=mngjO3ROcCw
#cplw1dow config:Code: [Select]>>> XIM4 [cplw1dow] START PASTE >>>
X4C: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:X4C
<<< XIM4 END PASTE <<<
#My Equipment
#Logitech G410 Keyboard
#Logitech G502 Mouse
#ZOWIE P-SR Mousepad
#My Settings: (Logitech Software)
#2400 dpi
#1000 tickrate
#default mousepad Logitech settings
#My Overwatch Settings:
#Sensitivity on max 100/100
#Aim Assist 0
#Widow Sensitivity 100 (This is very important otherwise you wont be able to score reflex headshots!)
#Xim4 Hip Settings:
#Sensitivity 35.0
#henrylibre curve (to be allowed to turn fast with a quite low sens in hip fire state)
#Steady Aim ON
#Boost: 80
Curve:Code: [Select]>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAoUHigyPEZQWmRobHB0eHyAhIiM:X4MB
<<< XIM4 END PASTE <<<
#ADS Xim4 Settings:
#Sensitivity 12.50
#henrylibre curve as well (to be able to do reflex shots)
#Steady Aim ON
#Boost: 0
Curve:Code: [Select]>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAoUHigyPEZQWmRobHB0eHyAhIiM:X4MB
<<< XIM4 END PASTE <<<
Enjoy guys i really tell you if u practice with it a few hours you will already feel this config!
I've made a new breakthrough in terms of curves for Overwatch.
Using the standard STV2 Latest firmware(not the beta drop which changes the curve ratio), the 1:1 movement stops at 44.9. If you map all movement linearly to 44.9%, the have 4 plots after that ramp to 100% you get the both of both worlds in terms of movement and accuracy.
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAYMExkgJi0zOUBGTVNZyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
Here is an example of the curve. I'm still tuning exactly where you should have the jump to 100, it would definitely be personal preference, depends on your sensitivity too. I'm currently trying 27 sens, 3200DPI with the curve above and reking as every character using 15 aim assist in game. Give it a try and let me know how it feels for you. I'm using no boost as well.
hmmm okay no I have to correct myself. As u said, personal preferences :) I changes it all a bit and now it feels better :)
I would love to hear more from you if u keep improving ur tracer settings :) !
Sent from my iPhone using Tapatalk
For this curve to work the best, you want it so you when you are aiming with your wrist, the turn speed indicator of the XIM doesn't flash, and when you move your whole arm fast, it does. THis means when you are wrist aiming the movement is kept from 0-44.9% - which is the 1:1 movement zone. You will be able to track targets really well. When you need to turn quickly, you should move your whole forearm or flick fast, which will activate the 100% part of the curve, letting you turn at full speed as normal.
I would mess around in practive range first you you can get the hang of where the curve acitvates for you. I've been playing on the following for the past 2 hours and been doing well:
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAULEBYcISctMjg9Q0lOVFnIyMjI:X4MB
<<< XIM4 END PASTE <<<
I'm using 40 sensitivity at 3200DPI. I would recommend the same DPI or same near abouts, as lower DPI seems to make the movement more responsive. I keep aim assist less than 30 at all times.
For me this is as close to PC as I could get, I've played Overwatch on PC since release and just started Xbox One a week ago. Overwatch console definitely needs a curve with the time based acceleration, and delaying this acceleration unless you are turning instead of aiming is key.
Just use my curve above, and keep playing around with your sensitivitity. Ideally you want it so your aiming wrist movement speed will not activate the turn speed cap(this is when the red lights flash on the xim)
Don't expect it to make you a god instantly, I still find it hard to attack airborne targets, genjis, lucios up close, but with a bit of practice you can get gold damage and elims every game with this curve as I've been doing.
Also as Tracer, use the right click to blink if you don't already, makes it way easier to blink backwards/sideways that using shift.
Edit:
http://xboxdvr.com/gamer/Sensational/video/20995846
Here's a clip I just got with this curve, notice gold elims, damage and 48% accuracy as tracer :)
I've made a new breakthrough in terms of curves for Overwatch.
Using the standard STV2 Latest firmware(not the beta drop which changes the curve ratio), the 1:1 movement stops at 44.9. If you map all movement linearly to 44.9%, the have 4 plots after that ramp to 100% you get the both of both worlds in terms of movement and accuracy.
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAYMExkgJi0zOUBGTVNZyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
Here is an example of the curve. I'm still tuning exactly where you should have the jump to 100, it would definitely be personal preference, depends on your sensitivity too. I'm currently trying 27 sens, 3200DPI with the curve above and reking as every character using 15 aim assist in game. Give it a try and let me know how it feels for you. I'm using no boost as well.
I've made a new breakthrough in terms of curves for Overwatch.
Using the standard STV2 Latest firmware(not the beta drop which changes the curve ratio), the 1:1 movement stops at 44.9. If you map all movement linearly to 44.9%, the have 4 plots after that ramp to 100% you get the both of both worlds in terms of movement and accuracy.
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAYMExkgJi0zOUBGTVNZyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
Here is an example of the curve. I'm still tuning exactly where you should have the jump to 100, it would definitely be personal preference, depends on your sensitivity too. I'm currently trying 27 sens, 3200DPI with the curve above and reking as every character using 15 aim assist in game. Give it a try and let me know how it feels for you. I'm using no boost as well.
hmmm okay no I have to correct myself. As u said, personal preferences :) I changes it all a bit and now it feels better :)
I would love to hear more from you if u keep improving ur tracer settings :) !
Sent from my iPhone using Tapatalk
For this curve to work the best, you want it so you when you are aiming with your wrist, the turn speed indicator of the XIM doesn't flash, and when you move your whole arm fast, it does. THis means when you are wrist aiming the movement is kept from 0-44.9% - which is the 1:1 movement zone. You will be able to track targets really well. When you need to turn quickly, you should move your whole forearm or flick fast, which will activate the 100% part of the curve, letting you turn at full speed as normal.
I would mess around in practive range first you you can get the hang of where the curve acitvates for you. I've been playing on the following for the past 2 hours and been doing well:
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAULEBYcISctMjg9Q0lOVFnIyMjI:X4MB
<<< XIM4 END PASTE <<<
I'm using 40 sensitivity at 3200DPI. I would recommend the same DPI or same near abouts, as lower DPI seems to make the movement more responsive. I keep aim assist less than 30 at all times.
For me this is as close to PC as I could get, I've played Overwatch on PC since release and just started Xbox One a week ago. Overwatch console definitely needs a curve with the time based acceleration, and delaying this acceleration unless you are turning instead of aiming is key.
Just use my curve above, and keep playing around with your sensitivitity. Ideally you want it so your aiming wrist movement speed will not activate the turn speed cap(this is when the red lights flash on the xim)
Don't expect it to make you a god instantly, I still find it hard to attack airborne targets, genjis, lucios up close, but with a bit of practice you can get gold damage and elims every game with this curve as I've been doing.
Also as Tracer, use the right click to blink if you don't already, makes it way easier to blink backwards/sideways that using shift.
Edit:
http://xboxdvr.com/gamer/Sensational/video/20995846
Here's a clip I just got with this curve, notice gold elims, damage and 48% accuracy as tracer :)
What is your steady aim setting on or off?I've made a new breakthrough in terms of curves for Overwatch.
Using the standard STV2 Latest firmware(not the beta drop which changes the curve ratio), the 1:1 movement stops at 44.9. If you map all movement linearly to 44.9%, the have 4 plots after that ramp to 100% you get the both of both worlds in terms of movement and accuracy.
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAYMExkgJi0zOUBGTVNZyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
Here is an example of the curve. I'm still tuning exactly where you should have the jump to 100, it would definitely be personal preference, depends on your sensitivity too. I'm currently trying 27 sens, 3200DPI with the curve above and reking as every character using 15 aim assist in game. Give it a try and let me know how it feels for you. I'm using no boost as well.
hmmm okay no I have to correct myself. As u said, personal preferences :) I changes it all a bit and now it feels better :)
I would love to hear more from you if u keep improving ur tracer settings :) !
Sent from my iPhone using Tapatalk
For this curve to work the best, you want it so you when you are aiming with your wrist, the turn speed indicator of the XIM doesn't flash, and when you move your whole arm fast, it does. THis means when you are wrist aiming the movement is kept from 0-44.9% - which is the 1:1 movement zone. You will be able to track targets really well. When you need to turn quickly, you should move your whole forearm or flick fast, which will activate the 100% part of the curve, letting you turn at full speed as normal.
I would mess around in practive range first you you can get the hang of where the curve acitvates for you. I've been playing on the following for the past 2 hours and been doing well:
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAULEBYcISctMjg9Q0lOVFnIyMjI:X4MB
<<< XIM4 END PASTE <<<
I'm using 40 sensitivity at 3200DPI. I would recommend the same DPI or same near abouts, as lower DPI seems to make the movement more responsive. I keep aim assist less than 30 at all times.
For me this is as close to PC as I could get, I've played Overwatch on PC since release and just started Xbox One a week ago. Overwatch console definitely needs a curve with the time based acceleration, and delaying this acceleration unless you are turning instead of aiming is key.
Just use my curve above, and keep playing around with your sensitivitity. Ideally you want it so your aiming wrist movement speed will not activate the turn speed cap(this is when the red lights flash on the xim)
Don't expect it to make you a god instantly, I still find it hard to attack airborne targets, genjis, lucios up close, but with a bit of practice you can get gold damage and elims every game with this curve as I've been doing.
Also as Tracer, use the right click to blink if you don't already, makes it way easier to blink backwards/sideways that using shift.
Edit:
http://xboxdvr.com/gamer/Sensational/video/20995846
Here's a clip I just got with this curve, notice gold elims, damage and 48% accuracy as tracer :)
I've made a new breakthrough in terms of curves for Overwatch.
Using the standard STV2 Latest firmware(not the beta drop which changes the curve ratio), the 1:1 movement stops at 44.9. If you map all movement linearly to 44.9%, the have 4 plots after that ramp to 100% you get the both of both worlds in terms of movement and accuracy.
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAYMExkgJi0zOUBGTVNZyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
Here is an example of the curve. I'm still tuning exactly where you should have the jump to 100, it would definitely be personal preference, depends on your sensitivity too. I'm currently trying 27 sens, 3200DPI with the curve above and reking as every character using 15 aim assist in game. Give it a try and let me know how it feels for you. I'm using no boost as well.
hmmm okay no I have to correct myself. As u said, personal preferences :) I changes it all a bit and now it feels better :)
I would love to hear more from you if u keep improving ur tracer settings :) !
Sent from my iPhone using Tapatalk
For this curve to work the best, you want it so you when you are aiming with your wrist, the turn speed indicator of the XIM doesn't flash, and when you move your whole arm fast, it does. THis means when you are wrist aiming the movement is kept from 0-44.9% - which is the 1:1 movement zone. You will be able to track targets really well. When you need to turn quickly, you should move your whole forearm or flick fast, which will activate the 100% part of the curve, letting you turn at full speed as normal.
I would mess around in practive range first you you can get the hang of where the curve acitvates for you. I've been playing on the following for the past 2 hours and been doing well:
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAULEBYcISctMjg9Q0lOVFnIyMjI:X4MB
<<< XIM4 END PASTE <<<
I'm using 40 sensitivity at 3200DPI. I would recommend the same DPI or same near abouts, as lower DPI seems to make the movement more responsive. I keep aim assist less than 30 at all times.
For me this is as close to PC as I could get, I've played Overwatch on PC since release and just started Xbox One a week ago. Overwatch console definitely needs a curve with the time based acceleration, and delaying this acceleration unless you are turning instead of aiming is key.
Just use my curve above, and keep playing around with your sensitivitity. Ideally you want it so your aiming wrist movement speed will not activate the turn speed cap(this is when the red lights flash on the xim)
Don't expect it to make you a god instantly, I still find it hard to attack airborne targets, genjis, lucios up close, but with a bit of practice you can get gold damage and elims every game with this curve as I've been doing.
Also as Tracer, use the right click to blink if you don't already, makes it way easier to blink backwards/sideways that using shift.
Edit:
http://xboxdvr.com/gamer/Sensational/video/20995846
Here's a clip I just got with this curve, notice gold elims, damage and 48% accuracy as tracer :)
I tried out theactualstevie curve; while aiming at mid to long range is excellent, close range combat is definitely a problem, especially against high mobility targets and strafe spamming. I spent 3-4 hours customizing the sensitivities and trying to find a good middle ground between maintaining accuracy at mid to long range and allowing enough sensitivity for tracking targets up close but in the end I don't think it is a curve for me.
I found it very hard to track targets within melee range as I would constantly overshoot due to the ramp up in the mouse curve. I play a lot of roadhog and I found making quick adjustments to aim after hooking my target was not as accurate as I am used to. Right now I will stick to henrylibre's curve as I can still manage great games with McCree with 40-50% weapon accuracy while also being able to track close range targets very easily.
If anyone is wondering what my current settings are for henrylibre's curve:
Xim sensitivity: Hip 20 ADS 10
Steady aim: on
Mouse: G502
DPI: 6400
Polling: 1000hz
AA: 70
(http://www.interload.co.il/upload/8742457.jpg)
63% weapon accuracy
with mccree
Since the aim assist changes, I have been playing around with curves again. I now use 85 aim assist. I've tried no curve for a while with 1250 boost. On tracer this seemed to work very well.
http://masteroverwatch.com/profile/xbl/global/Sensational/heroes/7
Above is my season 2 stats so far, I've only played 5 games but I think in 4 of them I got top damage and eliminations. Bear in mind I'm playing top people in premades so it's harder to do well.
I keep forgetting to record clips, but I'm finding it really easy as tracer recently, can cause the enemy a lot of annoyance. I had a ranked game on Lijuang tower with 72 eliminations as her.
With aim assist on I don't think you really need a curve to be good, but I think it helps. I was playing with a friend who is top 500 and was on par/doing better than him.
Still using Zowie ZA-12 @ 3200dpi, sens is around 45-55 hip.
Also I made an alt to mess around on, playing agaisnt only high ranked players all the time is tiring. On this alt here are my tracer stats:
http://masteroverwatch.com/profile/xbl/global/Harambenis/heroes/7
9.47KD.. Xim4 OP pls nerf
Since the aim assist changes, I have been playing around with curves again. I now use 85 aim assist. I've tried no curve for a while with 1250 boost. On tracer this seemed to work very well.
http://masteroverwatch.com/profile/xbl/global/Sensational/heroes/7
Above is my season 2 stats so far, I've only played 5 games but I think in 4 of them I got top damage and eliminations. Bear in mind I'm playing top people in premades so it's harder to do well.
I keep forgetting to record clips, but I'm finding it really easy as tracer recently, can cause the enemy a lot of annoyance. I had a ranked game on Lijuang tower with 72 eliminations as her.
With aim assist on I don't think you really need a curve to be good, but I think it helps. I was playing with a friend who is top 500 and was on par/doing better than him.
Still using Zowie ZA-12 @ 3200dpi, sens is around 45-55 hip.
Also I made an alt to mess around on, playing agaisnt only high ranked players all the time is tiring. On this alt here are my tracer stats:
http://masteroverwatch.com/profile/xbl/global/Harambenis/heroes/7
9.47KD.. Xim4 OP pls nerf
And are u currently using a curve or just the boost eventually ? :o
Sent from my iPhone using Tapatalk
Hi all. I'm having a hard time coming up with settings that feel right to me. Perhaps I'm just bad at figuring out the XIM settings. I play with a Razer Abyssus at 3500dpi and 1000Hz polling rate. The closest I've come to what I'd like is theactualstevie's curve. I have my XIM sensitivity set so that hand movements don't red-light. I believe I'm on the latest XIM firmware, nothing special.
I guess my biggest thing is I can't find a setting/sensitivity that allows we to perform 180 degree turns with even full arm movements on the mouse. I red-blink the XIM when moving that quickly, and yet my turn rate in-game is still not as fast as holding the right stick on the actual controller to the side. So it seems like I still have in-game movement "headroom" that I should be able to achieve, but I can't do it through mouse movements if that makes sense. I've tried diddling with various options in the game to no avail. What am I missing? I have in-game sensitivity at 100% on both vertical and horizontal, 0% aim assist.
Hi all. I'm having a hard time coming up with settings that feel right to me. Perhaps I'm just bad at figuring out the XIM settings. I play with a Razer Abyssus at 3500dpi and 1000Hz polling rate. The closest I've come to what I'd like is theactualstevie's curve. I have my XIM sensitivity set so that hand movements don't red-light. I believe I'm on the latest XIM firmware, nothing special.
I guess my biggest thing is I can't find a setting/sensitivity that allows we to perform 180 degree turns with even full arm movements on the mouse. I red-blink the XIM when moving that quickly, and yet my turn rate in-game is still not as fast as holding the right stick on the actual controller to the side. So it seems like I still have in-game movement "headroom" that I should be able to achieve, but I can't do it through mouse movements if that makes sense. I've tried diddling with various options in the game to no avail. What am I missing? I have in-game sensitivity at 100% on both vertical and horizontal, 0% aim assist.
Since the patch to aim assist last week have you tried with aim assist on now?
I use the standard curve/no curve applied, with 97 aim assist(100 feels like it sticks to the area around targets and not actaully on them). I then added 1000-1250 boost so it feels more responsive.
I'm using 3200dpi, and using around 40 sensitivity, feel like I can turn instantly.
No steady aim. To be honest I haven't tested Overwatch with steady aim for long but it didn't feel good at all. I think it's only useful for very high DPI(12,000)
Can someone please post a link to where in the patch notes it mentions anything about a change to aim assist. I saw the dev comment saying they would look into it, but that is not confirmation that anything has changed in game.
Since the aim assist changes, I have been playing around with curves again. I now use 85 aim assist. I've tried no curve for a while with 1250 boost. On tracer this seemed to work very well.
http://masteroverwatch.com/profile/xbl/global/Sensational/heroes/7
Above is my season 2 stats so far, I've only played 5 games but I think in 4 of them I got top damage and eliminations. Bear in mind I'm playing top people in premades so it's harder to do well.
I keep forgetting to record clips, but I'm finding it really easy as tracer recently, can cause the enemy a lot of annoyance. I had a ranked game on Lijuang tower with 72 eliminations as her.
With aim assist on I don't think you really need a curve to be good, but I think it helps. I was playing with a friend who is top 500 and was on par/doing better than him.
Still using Zowie ZA-12 @ 3200dpi, sens is around 45-55 hip.
Also I made an alt to mess around on, playing agaisnt only high ranked players all the time is tiring. On this alt here are my tracer stats:
http://masteroverwatch.com/profile/xbl/global/Harambenis/heroes/7
9.47KD.. Xim4 OP pls nerf
Can someone post a picture of the graph they use. I just got my xim4 today, I'm also using g502 mouse.
I've been searching the forum but all I see is start past.... and end paste and no actual image.
i tried doing it and I get a red triangle with and exclamation mark.
i tried doing it and I get a red triangle with and exclamation mark.
No i didn't. What are your setting for the g502?
Since the aim assist changes, I have been playing around with curves again. I now use 85 aim assist. I've tried no curve for a while with 1250 boost. On tracer this seemed to work very well.
http://masteroverwatch.com/profile/xbl/global/Sensational/heroes/7
Above is my season 2 stats so far, I've only played 5 games but I think in 4 of them I got top damage and eliminations. Bear in mind I'm playing top people in premades so it's harder to do well.
I keep forgetting to record clips, but I'm finding it really easy as tracer recently, can cause the enemy a lot of annoyance. I had a ranked game on Lijuang tower with 72 eliminations as her.
With aim assist on I don't think you really need a curve to be good, but I think it helps. I was playing with a friend who is top 500 and was on par/doing better than him.
Still using Zowie ZA-12 @ 3200dpi, sens is around 45-55 hip.
Also I made an alt to mess around on, playing agaisnt only high ranked players all the time is tiring. On this alt here are my tracer stats:
http://masteroverwatch.com/profile/xbl/global/Harambenis/heroes/7
9.47KD.. Xim4 OP pls nerf
Since the aim assist changes, I have been playing around with curves again. I now use 85 aim assist. I've tried no curve for a while with 1250 boost. On tracer this seemed to work very well.
http://masteroverwatch.com/profile/xbl/global/Sensational/heroes/7
Above is my season 2 stats so far, I've only played 5 games but I think in 4 of them I got top damage and eliminations. Bear in mind I'm playing top people in premades so it's harder to do well.
I keep forgetting to record clips, but I'm finding it really easy as tracer recently, can cause the enemy a lot of annoyance. I had a ranked game on Lijuang tower with 72 eliminations as her.
With aim assist on I don't think you really need a curve to be good, but I think it helps. I was playing with a friend who is top 500 and was on par/doing better than him.
Still using Zowie ZA-12 @ 3200dpi, sens is around 45-55 hip.
Also I made an alt to mess around on, playing agaisnt only high ranked players all the time is tiring. On this alt here are my tracer stats:
http://masteroverwatch.com/profile/xbl/global/Harambenis/heroes/7
9.47KD.. Xim4 OP pls nerf
Thanks for the update! I had been using your curve with Genji and had really high accuracy (35%) with a lower sens (31.50) but I found I couldn't turn quickly enough. Now with the curve taken off and boost at 1250, as well as aim assist at 95, I can turn much more rapidly to acquire targets and still stay on target. My accuracy has taken a little of a hit (30% in two games) but my K/D ratio has been through the roof. I appreciate your time and effort!
EDIT: Here's a video of me using the new settings.
https://youtu.be/MHbzw1UltPo
https://youtu.be/MHbzw1UltPo (https://youtu.be/MHbzw1UltPo)
Thought I'd finally register and post my settings since a lot of people seem to be trying lots of different things
I use a G502 @ 12k DPI with 500 polling at 23 sensitivity in the OW profile
I'm using a ballistic curve where all I've done is modify the rightmost value to be ~46% (as that's where I get the red flashes on current DPI/sens)
I have aim assist defaulted to 40, with it on 0 for projectile classes like Mei or Pharah or Junkrat and at 100 specifically for McCree.
I've found that this provides the smoothest aiming and tracking for me without forcing me to over-correct for aim assist but still using a small amount to make up for the console input delay.
I used to use this curve, but vertical aiming feels very messed up. Moving mouse horizontally will never hit limit/red light, but when moving the mouse up and down, you will hit the limit a lot.I've noticed this but it hasn't seemed to impact my vertical aiming very much. I'll mess around with the X/Y ratio but I'm really liking this curve.
I used to use this curve, but vertical aiming feels very messed up. Moving mouse horizontally will never hit limit/red light, but when moving the mouse up and down, you will hit the limit a lot.I've noticed this but it hasn't seemed to impact my vertical aiming very much. I'll mess around with the X/Y ratio but I'm really liking this curve.
The only real problem I had with it was a sense that fine-aiming was not very responsive, but changing the boost to ~1250 has fixed that entirely.
I was already a top Pharah in the 70's last season without the boost and curve, and now I'm flying through these ranks. 50-70 points a win.
TBH I'm not sure how to copy the curve so I can paste it on the board, but it's not a very complicated curve. Just go all the way to the rightmost column and change the max value from 100 to ~45 (move it up or down until you're just barely avoiding the flashing red lights with fast horizontal motion). It's just a way to compress the translator output so you have the full range of velocity available to you (instead of it ramping up to max at only 45% velocity)
could u copy ur curve in here I would love to try it ? :)
Sent from my iPhone using Tapatalk
I used to use this curve, but vertical aiming feels very messed up. Moving mouse horizontally will never hit limit/red light, but when moving the mouse up and down, you will hit the limit a lot.I've noticed this but it hasn't seemed to impact my vertical aiming very much. I'll mess around with the X/Y ratio but I'm really liking this curve.
The only real problem I had with it was a sense that fine-aiming was not very responsive, but changing the boost to ~1250 has fixed that entirely.
I was already a top Pharah in the 70's last season without the boost and curve, and now I'm flying through these ranks. 50-70 points a win.
TBH I'm not sure how to copy the curve so I can paste it on the board, but it's not a very complicated curve. Just go all the way to the rightmost column and change the max value from 100 to ~45 (move it up or down until you're just barely avoiding the flashing red lights with fast horizontal motion). It's just a way to compress the translator output so you have the full range of velocity available to you (instead of it ramping up to max at only 45% velocity)
could u copy ur curve in here I would love to try it ? :)
Sent from my iPhone using Tapatalk
@actualstevie
Have you tried the curve I'm using with lowered aim assist? At values above even 50 I absolutely have to overcorrect on moving targets, but at 40 my Soldier 76 play seems phenomenal. At close ranges it doesn't seem to have much of an impact at all beyond some slight pull up/down but at long ranges it helps center smaller targets.
The only character I think benefits from high aim assist is McCree, as you can essentially cheat by turning it to 100 and then flicking your reticle on and off of targets, shooting in time. You're not gonna get a lot of headshots but 75%+ accuracy on bodyshots more than makes up for that.
Since the aim assist changes, I have been playing around with curves again. I now use 85 aim assist. I've tried no curve for a while with 1250 boost. On tracer this seemed to work very well.
http://masteroverwatch.com/profile/xbl/global/Sensational/heroes/7
Above is my season 2 stats so far, I've only played 5 games but I think in 4 of them I got top damage and eliminations. Bear in mind I'm playing top people in premades so it's harder to do well.
I keep forgetting to record clips, but I'm finding it really easy as tracer recently, can cause the enemy a lot of annoyance. I had a ranked game on Lijuang tower with 72 eliminations as her.
With aim assist on I don't think you really need a curve to be good, but I think it helps. I was playing with a friend who is top 500 and was on par/doing better than him.
Still using Zowie ZA-12 @ 3200dpi, sens is around 45-55 hip.
Also I made an alt to mess around on, playing agaisnt only high ranked players all the time is tiring. On this alt here are my tracer stats:
http://masteroverwatch.com/profile/xbl/global/Harambenis/heroes/7
9.47KD.. Xim4 OP pls nerf
Thanks for the update! I had been using your curve with Genji and had really high accuracy (35%) with a lower sens (31.50) but I found I couldn't turn quickly enough. Now with the curve taken off and boost at 1250, as well as aim assist at 95, I can turn much more rapidly to acquire targets and still stay on target. My accuracy has taken a little of a hit (30% in two games) but my K/D ratio has been through the roof. I appreciate your time and effort!
EDIT: Here's a video of me using the new settings.
https://youtu.be/MHbzw1UltPo (https://youtu.be/MHbzw1UltPo)
Glad to hear it! My accuracy also dropped too, but my movement speed increased so much more so it was definitely worth changing - Especially when playing Tracer and Genji. I'm always happier using no curve, less messing around and tweaking needed. Now I can finally build up some muscle memory
Edit: nice gameplay!
@actualstevie
Have you tried the curve I'm using with lowered aim assist? At values above even 50 I absolutely have to overcorrect on moving targets, but at 40 my Soldier 76 play seems phenomenal. At close ranges it doesn't seem to have much of an impact at all beyond some slight pull up/down but at long ranges it helps center smaller targets.
The only character I think benefits from high aim assist is McCree, as you can essentially cheat by turning it to 100 and then flicking your reticle on and off of targets, shooting in time. You're not gonna get a lot of headshots but 75%+ accuracy on bodyshots more than makes up for that.
That's something I haven't tried yet. I'll definitely give it a go later.
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAQJDhMXHCEmKi80OT1CR0xQVVpf:X4MB
<<< XIM4 END PASTE <<<
Keep in mind the point is for the rightmost value to be where your xim starts giving the red flashing lights, so you'll want to calibrate it to your mouse.
@actualstevie
Have you tried the curve I'm using with lowered aim assist? At values above even 50 I absolutely have to overcorrect on moving targets, but at 40 my Soldier 76 play seems phenomenal. At close ranges it doesn't seem to have much of an impact at all beyond some slight pull up/down but at long ranges it helps center smaller targets.
The only character I think benefits from high aim assist is McCree, as you can essentially cheat by turning it to 100 and then flicking your reticle on and off of targets, shooting in time. You're not gonna get a lot of headshots but 75%+ accuracy on bodyshots more than makes up for that.
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAQJDhMXHCEmKi80OT1CR0xQVVpf:X4MB
<<< XIM4 END PASTE <<<
Keep in mind the point is for the rightmost value to be where your xim starts giving the red flashing lights, so you'll want to calibrate it to your mouse.
@actualstevie
Have you tried the curve I'm using with lowered aim assist? At values above even 50 I absolutely have to overcorrect on moving targets, but at 40 my Soldier 76 play seems phenomenal. At close ranges it doesn't seem to have much of an impact at all beyond some slight pull up/down but at long ranges it helps center smaller targets.
The only character I think benefits from high aim assist is McCree, as you can essentially cheat by turning it to 100 and then flicking your reticle on and off of targets, shooting in time. You're not gonna get a lot of headshots but 75%+ accuracy on bodyshots more than makes up for that.
TBH I rarely play tracer or genji so turn speed isn't that important to me, but if you were looking for something with a big difference between fine-aim sens and turning speed you'd want something that looks like this:
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAIEBwkMDhATFRgpO0xecIGTpLbI:X4MB
<<< XIM4 END PASTE <<<
Note that this was a guesstimate curve I made with zero testing, just to give you an idea of the shape you might want for that kind of curve.
If I'm mistaken someone please correct me, but as I understand it the curve is mapping input velocity (X axis) to output velocity (Y axis)
The grey line represents a perfectly even scaling. At 50% input XIM is providing 50% output, at 20% input it's 20% output, etc.
If you're below the grey line then you're reducing the output compared to the input (maybe 50% input only translates to 20% output)
The idea for the curve I use is that the XIM maxes out (is simulating the stick at maximum tilt) for me at around 46%, so by limiting the 100% input to 45% output I'm getting the full range of motion out of my mouse (as opposed to default curve where any speed beyond 45% input is pointless)
the idea for the curve I just posted is that you have very low output up to a certain threshhold for fine-aiming, but beyond a certain point the output ramps up quickly to allow for fast turning.
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAQJDhMXHCEmKi80OT1CR0xQVVpf:X4MB
<<< XIM4 END PASTE <<<
Keep in mind the point is for the rightmost value to be where your xim starts giving the red flashing lights, so you'll want to calibrate it to your mouse.
@actualstevie
Have you tried the curve I'm using with lowered aim assist? At values above even 50 I absolutely have to overcorrect on moving targets, but at 40 my Soldier 76 play seems phenomenal. At close ranges it doesn't seem to have much of an impact at all beyond some slight pull up/down but at long ranges it helps center smaller targets.
The only character I think benefits from high aim assist is McCree, as you can essentially cheat by turning it to 100 and then flicking your reticle on and off of targets, shooting in time. You're not gonna get a lot of headshots but 75%+ accuracy on bodyshots more than makes up for that.
Or maybe, do u think there is any way I could improve my turnspeed without loosing accuracy ?
Sent from my iPhone using Tapatalk
Hi all, just getting started with xim4 with a g502 mouse and tartarus (+nav controller as backup since I'm not used to keyboard yet), I just have a couple questions before jumping into it.
First off, in Overwatch I have a different control scheme (using controller) for basically every character. I'm used to the "bumper jumper" layout so L1 has always served as my jump, but I use triangle on the less mobile characters so that I can use their abilities easier. I also have swapped the abilities on many of the characters to what makes more sense to me. All this to ask, will mapping the controls to keys and mouse be effected by or affect the controls I have set ingame? I would like to keep all the configurations if possible, but if for example I map spacebar to jump through xim I don't want it to jump on some characters and use ability on others, does that make sense?
Also, what is a good control scheme for keys and mouse? or nav+mouse? I see a lot about sensitivity in this thread but not so much about button layout
You need to reset your controls for everyone before you set the keys on your Xim4, otherwise everything is going to be messed up.
As for the control scheme, I would go with the default on PC and then modify it from there to your liking.
For myself, this is my control scheme:
X = Spacebar
[_] = R
Triangle = Q
O = Left Control
L1 = Left Shift
R1 = One of my mouse buttons
L2 = Right Click
R2 = Left Click
R3 = One of my mouse buttons
Hey does anybody know, If I'll delete my Overwatch Game on ps4 and reinstall it..will my progress still be there ?
Sent from my iPhone using Tapatalk
Hey does anybody know, If I'll delete my Overwatch Game on ps4 and reinstall it..will my progress still be there ?
Sent from my iPhone using Tapatalk
Since the aim assist changes, I have been playing around with curves again. I now use 85 aim assist. I've tried no curve for a while with 1250 boost. On tracer this seemed to work very well.
http://masteroverwatch.com/profile/xbl/global/Sensational/heroes/7
Above is my season 2 stats so far, I've only played 5 games but I think in 4 of them I got top damage and eliminations. Bear in mind I'm playing top people in premades so it's harder to do well.
I keep forgetting to record clips, but I'm finding it really easy as tracer recently, can cause the enemy a lot of annoyance. I had a ranked game on Lijuang tower with 72 eliminations as her.
With aim assist on I don't think you really need a curve to be good, but I think it helps. I was playing with a friend who is top 500 and was on par/doing better than him.
Still using Zowie ZA-12 @ 3200dpi, sens is around 45-55 hip.
Also I made an alt to mess around on, playing agaisnt only high ranked players all the time is tiring. On this alt here are my tracer stats:
http://masteroverwatch.com/profile/xbl/global/Harambenis/heroes/7
9.47KD.. Xim4 OP pls nerf
Thanks for the update! I had been using your curve with Genji and had really high accuracy (35%) with a lower sens (31.50) but I found I couldn't turn quickly enough. Now with the curve taken off and boost at 1250, as well as aim assist at 95, I can turn much more rapidly to acquire targets and still stay on target. My accuracy has taken a little of a hit (30% in two games) but my K/D ratio has been through the roof. I appreciate your time and effort!
EDIT: Here's a video of me using the new settings.
https://youtu.be/MHbzw1UltPo (https://youtu.be/MHbzw1UltPo)
Glad to hear it! My accuracy also dropped too, but my movement speed increased so much more so it was definitely worth changing - Especially when playing Tracer and Genji. I'm always happier using no curve, less messing around and tweaking needed. Now I can finally build up some muscle memory
Edit: nice gameplay!
As I get used to the new config, my aim is getting better and my K/D ratio is going up. I just wanted to say thanks again, I can't say it enough! And I'm glad you enjoyed the gameplay clip!
Wait, are you guys using high aim assist with Genji?
I can understand with tracer since she's hitscan and also need quick turning, but Genji is a projectile character who needs to lead his shots. I'd think AA would be counter-productive to a Genji player.
Wait, are you guys using high aim assist with Genji?
I can understand with tracer since she's hitscan and also need quick turning, but Genji is a projectile character who needs to lead his shots. I'd think AA would be counter-productive to a Genji player.
Wait, are you guys using high aim assist with Genji?
I can understand with tracer since she's hitscan and also need quick turning, but Genji is a projectile character who needs to lead his shots. I'd think AA would be counter-productive to a Genji player.
Got my XIM this week and tried the no curve and 95 aim assist yesterday with tracer. Seems to work pretty nice. Thanks!
Didn't play much with tracer before, but was doing quite ok. Will try some other characters as well tonight
Got my XIM this week and tried the no curve and 95 aim assist yesterday with tracer. Seems to work pretty nice. Thanks!
Didn't play much with tracer before, but was doing quite ok. Will try some other characters as well tonight
Try Reaper with 100 AA..u'll destroy everything :D
Sent from my iPhone using Tapatalk
Got my XIM this week and tried the no curve and 95 aim assist yesterday with tracer. Seems to work pretty nice. Thanks!
Didn't play much with tracer before, but was doing quite ok. Will try some other characters as well tonight
Try Reaper with 100 AA..u'll destroy everything :D
Sent from my iPhone using Tapatalk
will do! Played a lot with him before i got the xim. I figured i would use some characters with more range now, but let's see. Are you only using 100 for reaper?
No steady aim. To be honest I haven't tested Overwatch with steady aim for long but it didn't feel good at all. I think it's only useful for very high DPI(12,000)Thx. Just tried your setup with no curve and boost. Bumped my aa to quite high number. Feels great only muscle memory needs to get used to it lol. After all aa in the games we play on console why not take advantage of it? 😊
Getting ready to jump into Overwatch. Anyone here playing with a 12K mouse and have found settings that work well? I'm on the G900 mouse.Morty!! You're alive!
Beginner here. Just ordered the Xim4 from ADZ.
I have my G502 (bought yesterday, the new one if that matters).
Could anyone recommend settings for the mouse that I can do already to start out with?
What Xim4 software should I download?
Beginner here. Just ordered the Xim4 from ADZ.
I have my G502 (bought yesterday, the new one if that matters).
Could anyone recommend settings for the mouse that I can do already to start out with?
What Xim4 software should I download?
U should download the latest software and I personally have my G502 at 12.000 DPI and 1.000 polling rate at the moment :)
Sent from my iPhone using Tapatalk
Beginner here. Just ordered the Xim4 from ADZ.
I have my G502 (bought yesterday, the new one if that matters).
Could anyone recommend settings for the mouse that I can do already to start out with?
What Xim4 software should I download?
U should download the latest software and I personally have my G502 at 12.000 DPI and 1.000 polling rate at the moment :)
Sent from my iPhone using Tapatalk
1. XIM4Flash-20160405.exe run this and connect via USB on port C.
1a. Factory Reset
2a. Update Firmware
2. Connect the Xim4 to keyboard, mouse, dual shock (without turning on). Then connect to PS4 that is on and press the PS-button on the dual shock.
3. (Unplug everything and) connect via bluetooth to Windows and run XIM4 Manager 20160405 and setup Overwatch.
Is that the correct order?
Hi I am a new xim 4 user. For Overwatch I am mainly planning on playing mccree and hanzo. I am confused by all of this curve and dpi setting, etc. So I am just going to ask what settings should I have it set on for those type of character that I play. I know that it may depend on the user but I want to get around the ball park range for the settings so I can play at an efficient level.
I hit 25, so now it's time for placements. Is there a thread or place you guys go to to group up?
I hit 25, so now it's time for placements. Is there a thread or place you guys go to to group up?
Not to be a stickler, but you should learn the game before going straight in to Competitive >.<
So what is everyones settings for those that need fast 180 turn speeds? Dpi, hip, boost and or curves please. I want to compare and see if my current setup is optimal. I have my g502 at 12000dpi anf at a low hip sens of 15 with a high boost around the 2000s. Its working quite well for me but wondering if anyone else has more optimal settings as im always hitting the red lights. Maybe a higher hip with low to no boost? Im running high aa btw.Sometimes it helps to move the mouse slower and in an even pace. Boost should already help as well. I played around with turn assist yesterday. Just bind it and try, makes you spin around like a madmen
The last days i got often detected as M/K Player by the other team.
I got some nice messages and some will show the clips blizzard that they can ban me.
What i can do that my gaming dont look like a M/K Playaer? Is that even possible?
If i go down with spped and boost ,than the game dont work for me. I need very fast movement in OW.
In other games i mainly low sens player but that not work for me in OW.
The last days i got often detected as M/K Player by the other team.
I got some nice messages and some will show the clips blizzard that they can ban me.
What i can do that my gaming dont look like a M/K Playaer? Is that even possible?
If i go down with spped and boost ,than the game dont work for me. I need very fast movement in OW.
In other games i mainly low sens player but that not work for me in OW.
Been messing around with settings and found one that I really like. I'm a genji main so this is particularly to him.
Mouse:G502
Dpi:12000
Polling: 1000
Xim sensitivity:7
Curve:none
Boost:1250
Steady aim:on
Aim assist:95
Im a diamond solo queue player. I get gold elimations and damage almost every game. If anyone has any questions or if I missed anything just let me know! 😆
Been messing around with settings and found one that I really like. I'm a genji main so this is particularly to him.Do you use a cloth mouse pad or plastic? I have the same mouse and the turnspeed seems to be slow for me
Mouse:G502
Dpi:12000
Polling: 1000
Xim sensitivity:7
Curve:none
Boost:1250
Steady aim:on
Aim assist:95
Im a diamond solo queue player. I get gold elimations and damage almost every game. If anyone has any questions or if I missed anything just let me know! 😆
you can use the turn assist feature or the right stick bind for it :)I turned turn assist on, but still not fluid and not easy to make selections.
you can use the turn assist feature or the right stick bind for it :)I turned turn assist on, but still not fluid and not easy to make selections.
I then tried right stick, but this made it so I couldn't turn at all in game.
Sent from my SM-G925V using Tapatalk
Been messing around with settings and found one that I really like. I'm a genji main so this is particularly to him.
Mouse:G502
Dpi:12000
Polling: 1000
Xim sensitivity:7
Curve:none
Boost:1250
Steady aim:on
Aim assist:95
Im a diamond solo queue player. I get gold elimations and damage almost every game. If anyone has any questions or if I missed anything just let me know! 😆
I'm curious as to how you're able to turn quickly with the XIM sens that low, but if I had to guess it would be because your DPI is so high. I have a Zowie EC-2A and I have my DPI set at 3200 and XIM sens at 33. Anything lower than 33 and I can't do a 180 without lifting my mouse and swiping again.
Can somebody please tell me what the best config is for tracer with G502? Ballistic curve or not? Aim assist?u can look it up by urself actually
You dont think i alredy tried to do that?? If i new the answer i wouldnt ask for help genius einstein!Can somebody please tell me what the best config is for tracer with G502? Ballistic curve or not? Aim assist?u can look it up by urself actually
Sent from my iPhone using Tapatalk
So after trying default curve I didn't really feel comfortable so I started trying new curves. I main tracer, but this curve worked with everyone including widow/ana. I basically made it for quick turn speeds to accommodate any hero I use aim assist with without losing accuracy at slow speeds. Please make sure you have the g502 or another 12k mouse as this curve may not work for lower DPI mice. Here are my settings:Hey hoodlums, i will try your setting today and then i tell you how i like this. Do you use a cloth Or plastic pad?
12k DPI / 100hz polling
Hip sens 6 / no ads profile
I'm game sens for relative zoom set to 50. Normal vert/hor sens still 100
0.85 y/x ratio
1000 boost
Steady Aim: on
Curve: >>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1ABQoPGuBkJyns73IyMjIyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
I do not notice any pulling even with high aim assist and feel like the curve has very smooth movement. I am sure there may be tweaking you can do but these settings are gold for me. Let me know if u try and how u like them
Can somebody please tell me what the best config is for tracer with G502? Ballistic curve or not? Aim assist?
Dear lord, 12k DPI with 20+ sensitivity is extremely sensitive. Don't your XIMs scream red flashes all the time? Can you actually play heroes that require aiming with this setup (like Mcree)?
Can somebody please tell me what the best config is for tracer with G502? Ballistic curve or not? Aim assist?
It's really down to preference.
I'm at ~3300 SR and my settings seem just fine for all heroes (only adjustments are done with in-game settings)
12k DPI / 500hz polling
Hip sens 23 / no ads profile
All in-game sens 100
1.00 y/x ratio
1250 boost
Steady Aim: on
Curve: >>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAQJDhMXHCEmKi80OT1CR0xQVVpf:X4MB
<<< XIM4 END PASTE <<< (it's linear, less of a curve and more of a compression)
This is with a G502 on a flat wooden surface (no pad)
I've had tremendous success in my comp matches with Pharah, Reaper, Tracer, Zarya, Roadhog, and Ana.
For Tracer I use about 60 AA since I don't want my aim to be dragged off my target if I'm attacking a clump from behind
Dear lord, 12k DPI with 20+ sensitivity is extremely sensitive. Don't your XIMs scream red flashes all the time? Can you actually play heroes that require aiming with this setup (like Mcree)?
Yeah it flashes but for Tracer it's totally fine :) I like very high sensitivities as long as I can handle them. But no I have a different set up for e.g. McCree
Sent from my iPhone using Tapatalk
Can somebody please tell me what the best config is for tracer with G502? Ballistic curve or not? Aim assist?
It's really down to preference.
I'm at ~3300 SR and my settings seem just fine for all heroes (only adjustments are done with in-game settings)
12k DPI / 500hz polling
Hip sens 23 / no ads profile
All in-game sens 100
1.00 y/x ratio
1250 boost
Steady Aim: on
Curve: >>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAQJDhMXHCEmKi80OT1CR0xQVVpf:X4MB
<<< XIM4 END PASTE <<< (it's linear, less of a curve and more of a compression)
This is with a G502 on a flat wooden surface (no pad)
I've had tremendous success in my comp matches with Pharah, Reaper, Tracer, Zarya, Roadhog, and Ana.
For Tracer I use about 60 AA since I don't want my aim to be dragged off my target if I'm attacking a clump from behind
Hei HiddenBros, since you have steady aim on, are you using the BetaSteadyAim01.exe firmware build with it?
Or just the normal official release firmware?
What is the justification behind steady aim btw?
Thanks!Dear lord, 12k DPI with 20+ sensitivity is extremely sensitive. Don't your XIMs scream red flashes all the time? Can you actually play heroes that require aiming with this setup (like Mcree)?
Yeah it flashes but for Tracer it's totally fine :) I like very high sensitivities as long as I can handle them. But no I have a different set up for e.g. McCree
Sent from my iPhone using Tapatalk
@arthred: What setup would that be exactly for McCree? If you don't mind sharing.
Thanks!
• Controller users can now choose between two aiming mods
• Dual-Zone mode (New default): The vast majority of the thumbstick's range moves with reduced sensitivity and relatively high acceleration. However, when the thumbstick crosses to the outer 10% of its range, it will move with high sensitivity and relatively low acceleration. This mode will allow for more precise aiming, while still allowing players to turn around quickly.
• Exponential Ramp mode (Old default): As the thumbstick moves towards the outside of its range, the sensitivity is ramped up exponentially. The acceleration remains relatively high throughout.
12kDPI 1000HZ
Sensitivity: 35.00
Y/X Ratio: 1.0
Boost: 1000
Steady Aim: On
Ballistic Curve:
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAwZJTI+S1dkcH2JlpyiqK+1u8HI:X4MB
<<< XIM4 END PASTE <<<
Overwatch Game Settings:
Horizontal Sens: 90
Vertical Sens: 90
Aim Assist Strength: 95 (Really helps you out in taking down Pharah)
are you playing on a TV?
the game has an inputlag but its not 1-2 seconds delay, that usually comes from playing on a TV that isnt set to gamingmode for less lag
also 12.000 dpi and your xim sensitivity sounds a bit too high
yeah im playing on tv, you think that this is the main issue? i meant 2000dpi, sorry misspelled.
But i also wonder is it possible to catch pc-mouse quality on ps ?
p.s : BTW it doesnt catch fast moves, meaning when i try to make a fast left or right it moves just a little
I have read this entire thread and tried almost every different variation I could. I have gone from 1600 DPI to 10k and basically what I found is the Logitech mice work better with the xim4 at higher DPI and pretty much everything else needs to be lower to your preference. I have also tried every curve in this forum and I am still using Henry's curve with the 1250 boost for characters like genji and tracer. If I am playing mcree or anything that's hitscan I will run 80 boost with a higher xim sensitivity. I placed top 500 season 1 and am currently top 5 in season 2. I could probably write 10 paragraphs on here about the different curves and options so if your not running the g502 and have questions let me know I will be glad to answer. I am also open to any objections or ideas to help me out.
DPI: 6400
Xim: 55 with 1250 boost and 65 with 80 boost
Razer Deathadder chroma
Henry's Curve
Aim assist 95 projectile 100 hitscan
Benq Rlq monitor
Also I am not using a keyboard for movement. Tried it but doesn't seem to go with console very well so I am running the Sony nav controller works really well with any character in the game.
I'm currently top 5 and all the xim users I know are running the same curve DPI as I am. Try my post above if you like. Just understand almost everyone's setup is a little different in ways of preferred sensitivity for certain heroes and mainly depends on what you play and also your equipment. There is no perfect setup yet and I'm still working on it along with many others but as for now this thread really has everything that's out there being used now.
Are most of you guys running henrys curve still or going without it?
Whats the overall consensus on curves since the most recent aim assist change?
I seriously have been changing my settings way too often and really need to settle on something and its down to henrys curve or the default. I prefer henrys most days but sometimes not sure.
DPI: 6400
Xim: 55 with 1250 boost and 65 with 80 boost
Razer Deathadder chroma
Henry's Curve
Aim assist 95 projectile 100 hitscan
Benq Rlq monitor
...so if your not running the g502 and have questions let me know I will be glad to answer. I am also open to any objections or ideas to help me out.
Hey! After the recent patch of ow the aiming feels a lot worse than before, does anyone have the same feeling?
well, im glad im not the only one getting this problem but it is so annoying for all of us. Where is that dynamic and original mode? In the game settings or in xim menu?
Go to controls, under the sensitivity settings will be an "advanced settings" tab with a plus sign. Hit that to open up the advanced controls. The two aiming modes are "Dual-Zone" and "Exponential Ramp" The exponential ramp mode is the original aiming mode that the Overwatch ST was trained on. Although other people are reporting that they aren't getting the same pre-patch performance using the "Exponential Ramp" mode, but in the one game I ran, I personally didn't experience any issues, everything seemed the same to me.
i guess ill be playing destiny until they decide to revert the changes, all i can say is f*** blizzard
in retrospect i've tweaked my config so's Tracer's melee+ability1 combo is bound exclusively to mouse3 so i don't have to deal with the reload interrupt if i don't want to
>>> XIM4 [Overwatch: Tracer.cfg Curveless] START PASTE >>>
X4C: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:X4C
<<< XIM4 END PASTE <<<
I can't really see a reasonable drawback to changing it for D.Va or Winston, but ability 1 is bound by its lonesome to mouse3 should i need it.
>>> XIM4 [Overwatch: D.Va.cfg Curveless] START PASTE >>>
X4C: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:X4C
<<< XIM4 END PASTE <<<
how much dpi do u have? and why do u have 1,10 at ur x/y ratio? I'm just curious :)
Hi,
I come from PC FPS Games like CS where mouse sensitivity is a highly talked about topic and generally pros and myself have used relatively really low DPI and then you adjust sensitivity from there. Using something like a Steel Series Rival at 400 DPI with an ingame sensitivity of like 3. Can someone explain to me why is it that we're using such high DPI and low sensitivity? There was much analysis that using lower DPI and adjusting sensitivity from there was much better than say using high DPI and low sensitivity. Please correct me if I am wrong! =)
Is it possible to grab the new ST through the mobile app or does the new ST require hooking the xim up to the PC and then updating it this way?
Sent from my SM-G925V using Tapatalk
[...] why do u have 1,10 at ur x/y ratio? I'm just curious :)
New ST feels good, definitely less "floaty". But is it just me feeling like the horizontal sensitivity is quite a bit slower than the vertical?
New ST feels good, definitely less "floaty". But is it just me feeling like the horizontal sensitivity is quite a bit slower than the vertical?
I don't have that feeling
Sent from my iPhone using Tapatalk
[...] why do u have 1,10 at ur x/y ratio? I'm just curious :)
now i'm worried i don't correctly understand what that x/y thing does haha eek!
my understanding was that it boosted the speed of your vertical sensitivity... is that wrong?
Steady aim on or off? Is there a new steady aim patch out? If there is, big difference than the old?
Hi everyone,
I wanted to know if my Henry curve was correct. Is any able to post an image of their curve ?
Basically, I'm turning too slow still.. I can't seem to turn 180 degrees in one fast motion. :(
Hi everyone,
I wanted to know if my Henry curve was correct. Is any able to post an image of their curve ?
Basically, I'm turning too slow still.. I can't seem to turn 180 degrees in one fast motion. :(
I wouldn't use the old curves (Henry's,humanfemale, etc) with the old or new ST, as they aren't designed for them. And you can't turn really fast like PC as there's a maximum turn rate on console. If you see a red light flash on your xim4 when turning, you are moving the mouse to fast. When you move the mouse, you are basically moving the joystick. The mouse can't do anything that the joystick can't.
If you have trouble turning around but want to keep a low sensitivity, use turn assist / bind a profile with high sens for when you need to snap around, what people do in destiny when sprinting.
my mouse stutters or twitches a lot [...]
there is a turn assist option that you can keybind. Makes you turn like a madmen. With regards to profile binding and switching, you can do it, but imo that is to slow to switch in a fight
Thanks rawr123.
Should I use a newer curve or none at all ? If a new one, can you point me in the right direction ?
Much appreciated.
my mouse stutters or twitches a lot [...]
if you're running sandhawc make sure you don't have mouse acceleration turned on in windows
my mouse stutters or twitches a lot [...]
if you're running sandhawc make sure you don't have mouse acceleration turned on in windows
Im not running any certain settings, its my custom settings, in playing PS4. Max sensitivity in game, 12,000 DPI mouse and 10 sensitivity in XIM4.
Hello everyone, looking for some advice on any solid settings that they are using? I am currently running no curve, 1250 boost, 6000-8000 DPI (playing around with different DPI), Max in game sensitivity, aim assist ~ 70 for most characters, using the current ST, Steady Aim on, mouse sensitivity 30-35. Ever since Blizzard added the new Aim assist, Dual Zone, shot just doesn't feel right. I have switched back to the so said original aim assist, exponential ramp, and it feels somewhat different. If anyone could help that would be much appreciated.
Side note- I typically like to play Hit scan characters like Mcree, pre-update I could easily average around +50% accuracy, now average around 40-50%. So if anyone has a specific Mcree setting that is working and could let me know, that would be awesome.
-Thanks
I just got my XIM4 and I'm having issues with what I believe to be aim acceleration. For example, if I move my mouse across my mouse pad slowly I'll do several circles. But if i move the same distance by flicking then my aim only moves about an inch cross the screen. I know the XIM is emulating the analog stick so there are limitations, but does anyone have advice for someone who's used to playing on PC with a very high sens and a flick shot playstyle? Right now the game just isn't keeping up. I did notice that it wasn't nearly as bad in Battlefield 1, so it's probably just part of the games aim mechanics.
And I should clarify that I followed all the instructions for basic setup. Max in-game sens and exponential ramp with latest support for the game.
my mouse stutters or twitches a lot [...]
if you're running sandhawc make sure you don't have mouse acceleration turned on in windows
Im not running any certain settings, its my custom settings, in playing PS4. Max sensitivity in game, 12,000 DPI mouse and 10 sensitivity in XIM4.
Has anyone already gained experience since the new patch of today?
Has anyone already gained experience since the new patch of today?
What do you mean gained experience?
What are you guys doing for ana settings? can't seem to settle on anything, especially for scoped.
What are you guys doing for ana settings? can't seem to settle on anything, especially for scoped.
100% relative zoom sensitivity in-game. Create ADS profile in xim manager, activation right mouse button obviously. Set sensitivity to half of your current Hip sensitivity to start with, tweak in small increments up or down if you are not happy.
I also settled on 70ms delay for ADS profile activation to not mess with Mei and McCree's right click fire.
But also because scope-in time for Widowmaker and Ana is not as rapid as in some games and as you are still doing micro adjustments off the hip to line up a shot while the scope-in animation is in progress, the sensitivity reduction in the middle of the animation can be jarring. 70ms seems to be the sweet spot for me where transition happens smoothly and I don't notice it.
Hi guys
Just got XIM and I have a Logitech G400 mouse @ max DPI 3800 @1000Hz polling. Am I right if I use someone's settings who has 12K DPI. I should 2.5 X the XIM Sensitivity. I'm more of a snappy player rather than moving my arm to aim kinda one.
I can happily answer any other questions as well.
HR
Hey!! I'm a main pc player, master rank. But I have an account on ps4. Currently my roommate is playing on it, but I have this old xim4 I was using back when I was playing destiny. I kind of want to try it on OW to see how it is.
On pc I play at 800 dpi I think on a razer deathadder. Ingame sensitivity is 26.
How should I setup my xim4 in the app?
Thanks !
Can someone please help me with this weird problem
i just bought xim4 everything is good the turning speed is perfect for me but i only have one problem
when i move the mouse very slowly it's not smooth at all, it's really stuttering so i can't track far enemies. but when i move the mouse a bit faster it's smooth.
Mouse: G402
DPI: 4000 , 1000hz
in game sens maxed
XIM4 sens: 95 HIP, i'm also using Henry's curve . Boost: 1250. Steady aim ON
I'm also using steelseries mousepad
i don't get this stuttering when i use a controller. i don't think it's the game.Can someone please help me with this weird problem
i just bought xim4 everything is good the turning speed is perfect for me but i only have one problem
when i move the mouse very slowly it's not smooth at all, it's really stuttering so i can't track far enemies. but when i move the mouse a bit faster it's smooth.
Mouse: G402
DPI: 4000 , 1000hz
in game sens maxed
XIM4 sens: 95 HIP, i'm also using Henry's curve . Boost: 1250. Steady aim ON
I'm also using steelseries mousepad
Overwatch look mechanic sucks and will always feel somewhat floaty unless they decide to fix it. I would suggest lowest sens you can handle for maximum accuracy. Also, no curve is needed with the NEW ST and I would also suggest turning steady aim off. Give it a try and see what you think, you can always change back.
Hey guys,
Sorry if this is the wrong thread for this; I just purchased the xim4 for OW PS4. I'll be using the Sony Nav controller so I can couch game. But for those of you using a 4 button mouse, how are you able to bind all your buttons? Wouldn't you need a 6 button mouse or do you count the scroll wheel? I would imagine accidentally scrolling up or down when trying to press the wheel would be a problem. Haven't purchased a mouse yet, so opinions would be great! Thanks all!
How is the G602 with the Xim4? Are there still issues? Looking at going all wireless and this mouse seems to be pretty top notch, work well for Overwatch?
I have a question:
While playing Reinhardt with XIM. When you charge - Usually in the controller you can slightly modify your direction but a full peg to any direction results in slight movement.
With XIM+KBM I get that this might not be possible but even when I try to flick the mouse quick as if I am pegging Reinhardt doesnt change direction.
Do i need to have turn assist during charge enabled or something else I am missing?
Disclaimer: I am quite new to XIM but I think I have the basics down :)
A lot of Gamers with a 12000 DPI Mouse set the Sens to 10-15, but Gamers wit a 8000dpi Mouse to 50....why?
10 sens @ 12K converted to 3K:
DPI: 12K / 3K = 4
Sensitivity: 4 x 10 = 40
= 40 sens @ 3K
Im confused here. What if my mouse is only capable of 3200 max. What settings do i need to input on my Xim?Depends on what you prefer, a low or high sensitivity. I personally recommend low.
how can i calibrate the surface with G402?
how can i calibrate the surface with G402?
same for me with the G700S. How can I find the Settings?
how can i calibrate the surface with G402?
The only problem that i'm having is the tracking
for example when i try to track a far lucio with Soldier 76 the aim is not smooth at all it's jittery. i don't know i it's my mousepad or the settings
Okay so, I've read this thread in depth and have a pretty good understanding about how this product works and thrives.
That being said I have a few questions:
-Aim-Assist, yes or no?
-DPI: Highest and Adjust from there?
-The Overwatch ST that comes on the device are the optimal settings at this time?[/li]
Also when it comes to larger displays I.E. Tvs, will the input lag be unbearable? I have a 4k smart Tv but my girlfriends TV (where I mostly play) is not 4k.
Also when it comes to larger displays I.E. Tvs, will the input lag be unbearable? I have a 4k smart Tv but my girlfriends TV (where I mostly play) is not 4k.
For the sake of you being able to justify your purchase, you should plug in the deathadder and use it for a game and then use the logitech so you know what i'm talking about. I can't explain it, but it feels smoother and just better. A monitor is always the better choice.
TV's do not ALL have BAD input lag. Even those with BAD input lag can be very playable, just not at high ranks due to small details and split second decisions that decide rounds. You would have to look up each TV individually. I personally had a huge 4k Vizio and it lagged pretty bad. Ones with gaming modes should be fine and usually the smaller the better is a good starting point. I don't think you could ever tell the difference unless its between a big tv without gaming mode (which I had) to a monitor. We're talking milliseconds of difference here and obviously the lower you go, the human eye wont be able to notice it.
You sound like me always wanting to make sure all the correct parts and pieces are in place. I was ablel to reach grandmaster+ with what I have posted which is the reason I posted it to help some others, hopefully you can find it useful too.
Yeah, I'm just going to take your word for it, this mouse is old and out of date anyway (death adder).
Also, yes you are right, details are important for me since the money isn't an issue. I just had to sell my girlfriend on the idea of having a whole separate desk set up for my Xbox lol. Now that issue is settled is all about the details. I'm currently platinum on XBOX ONE S, I have had great success in video games on PC, especially blizzard games (I am a 3x Gladiator in WOW Arena). I also played Counter-Stike 1.6 at a very high level. My problem is I'm GARBAGE with a controller, I'm probably being hard on myself for only playing for about a month and NEVER play console before this, but the point is I find myself several times a game thinking "if only i had a mouse that farah would be dead" or something like that. I already main hitscan and tanks so this is a no brainer. I just hope it works well.
Chances are if you've played some games like CS you probably have pretty good game sense. (I never played WoW but I played Guild Wars PVP & Perfect World in that genre) but mainly played shooters. XIM4 will definitely give you an edge AIMING, but the rest is up to you I can assure you that. Overwatch is the type of game that one player can lose you the game before it even starts so sometimes it depends on your team and it always depends on game sense especially the higher you go.
Don't be discouraged if you don't do well at first, trust me I did worse when I first made the switch from controller to xim4. When you do finally get used to it which could be quick or could take some time, for me it took me roughly 3 months to use the xim efficiently, you will be a beast assuming you are coupling xim4 aiming with good game sense and positioning. Thats really the difference between a high level player and a low level player. You can see stuff coming bc you keep track in your head, or you run and gun like cod and get @#$% on by someone who can see it coming everytime you come out of spawn.
So, got everything working, very happy with the results. I climbed 300 in ranked rating last night going to push diamond this weekend. HOORAHHHH
P.S. Thanks a lot size for your help.
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANQAxADEAMgAwAAoUHigyPDw8PDw8PDw8PDw8PDw8:X4MB
<<< XIM4 END PASTE <<<
Hiya everyone!
I'm fairly new to xim4 and how it works and I've learned quite a bit over the past two weeks of me having it. But alas, I've come to realize I'm a bit of a copycat when it comes to people's configs. Lol. I've learned to tweak settings pretty well after seeing other people's configs for certain hero's in the game but I'm having a big trouble with one hero in general... Tracer.
It's funny because Tracer is actually my main. I use her religiously on controller. Lol
I've tried tweaking some settings for a config I have for mccree but it either feels to sluggish or to jittery. Just depends on what I play around with.
But anyways, I was curious... Can someone help me out and share their tracer configs? I can adjust my settings and dpi if necessary. Like I said, I'm a bit of a copycat so please forgive me for not being ultra unoriginal when it comes to configs... But if it's not broken, why fix it? :P lol
I'd extremely appreciate it and I hope everyone has a nice day! :)
Mouse: g502 Logitech
Keyboard: g513 Logitech
Ps4: YAASSSGAGA
>>> XIM4 [Overwatch Size] START PASTE >>>
X4C: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:X4C
<<< XIM4 END PASTE <<<
Hiya everyone!
I'm fairly new to xim4 and how it works and I've learned quite a bit over the past two weeks of me having it. But alas, I've come to realize I'm a bit of a copycat when it comes to people's configs. Lol. I've learned to tweak settings pretty well after seeing other people's configs for certain hero's in the game but I'm having a big trouble with one hero in general... Tracer.
It's funny because Tracer is actually my main. I use her religiously on controller. Lol
I've tried tweaking some settings for a config I have for mccree but it either feels to sluggish or to jittery. Just depends on what I play around with.
But anyways, I was curious... Can someone help me out and share their tracer configs? I can adjust my settings and dpi if necessary. Like I said, I'm a bit of a copycat so please forgive me for not being ultra unoriginal when it comes to configs... But if it's not broken, why fix it? :P lol
I'd extremely appreciate it and I hope everyone has a nice day! :)
Mouse: g502 Logitech
Keyboard: g513 Logitech
Ps4: YAASSSGAGA
Don't worry most of us are copycats :)
A lot of other XIM Users and I have had great success using Size's Settings for all heroes for G502 @ 12,000dpi 1000hz polling from: http://xim4.com/community/index.php?topic=50099.msg585676#msg585676
If you're lazy like me here is the exact code for the settingsCode: [Select]>>> XIM4 [Overwatch Size] START PASTE >>>
X4C: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:X4C
<<< XIM4 END PASTE <<<
You can paste it in the manager by clicking on the three dots top right and then clicking on the down arrow.
(https://i.imgur.com/5rqr2DO.png)
Hiya everyone!
I'm fairly new to xim4 and how it works and I've learned quite a bit over the past two weeks of me having it. But alas, I've come to realize I'm a bit of a copycat when it comes to people's configs. Lol. I've learned to tweak settings pretty well after seeing other people's configs for certain hero's in the game but I'm having a big trouble with one hero in general... Tracer.
It's funny because Tracer is actually my main. I use her religiously on controller. Lol
I've tried tweaking some settings for a config I have for mccree but it either feels to sluggish or to jittery. Just depends on what I play around with.
But anyways, I was curious... Can someone help me out and share their tracer configs? I can adjust my settings and dpi if necessary. Like I said, I'm a bit of a copycat so please forgive me for not being ultra unoriginal when it comes to configs... But if it's not broken, why fix it? :P lol
I'd extremely appreciate it and I hope everyone has a nice day! :)
Mouse: g502 Logitech
Keyboard: g513 Logitech
Ps4: YAASSSGAGA
Don't worry most of us are copycats :)
A lot of other XIM Users and I have had great success using Size's Settings for all heroes for G502 @ 12,000dpi 1000hz polling from: http://xim4.com/community/index.php?topic=50099.msg585676#msg585676
If you're lazy like me here is the exact code for the settingsCode: [Select]>>> XIM4 [Overwatch Size] START PASTE >>>
X4C: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:X4C
<<< XIM4 END PASTE <<<
You can paste it in the manager by clicking on the three dots top right and then clicking on the down arrow.
(https://i.imgur.com/5rqr2DO.png)
I am rocking
Mouse: Deatheader Chroma
DPI : 10k
Pulling: 1k
Just bought xim4 so can anyone help me with the best config any curve like Henrry's curve I would love if someone could help me out. I play Zen as my main but need a config to help me and maybe a config with all around ok for all heros
I just bought the g502 and asking since there no need for curves no longer what is a good dpi to play at with g502
Widow makers there's an ADS curve I experimented with. Xim4 ballistic curve tool has been deleted from googledrive[1] unfortunately so I can't include a picture.Code: [Select]>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANQAxADEAMgAwAAoUHigyPDw8PDw8PDw8PDw8PDw8:X4MB
<<< XIM4 END PASTE <<<
Experimented with many curves against unpredictable exponential acceleration. I don't know why this feels better than 1:1 or 20/40/xx cut-off.
Slow drags and fast twitch movements seem consistent. Obviously if you know Overwatch look mechanic you know I'm not claiming any perfection here. Willing to tolerate floaty movement and any other quirks for consistency.
Mouse: 5600 DPI, 500Hz
Horiz/Vert sens: Exponential Ramp 100/100
Windowmaker Relative sens: 100%
Widowmaker Aim Assist: 0%
Xim4 ADS sens: 3.0
Xim4 ADS delay: 100ms
Xim4 ADS boost: 300
Xim4 ADS curve: see above
By the way 3.0 is a 90 degree ADS turn across my Steelseries QcK mousepad. This is a 180 hip turn across that same mouse pad:
Xim4 Hip sens: 6.75
Xim4 Hip curve: no curve
1. https://05ddc01dc59366e39e7814b8ed266a7ea1554b8e.googledrive.com/host/0B8EFYcEZMa4deTNOUjM2OTlKTVU/ximballisticcurvetool.html
I don't understand why you'd do this to yourself. After playing Overwatch in 144Hz there is no way of going back. Why do people play this game using a laggy pathetic mimic of a mouse when they could buy the PC version and experience true control with a buttery smooth mouse input. Oh yeah, it's because they are scared they'll fail when the playing field is equal and they do not innately have an advantage by using m/kb. No. You do not admit that because you're in denial, well how about the fact you've never played on a PC and sunk cost fallacy tells you to invest in over priced pieces of plastic (xim) instead of joining the meme masterrace.
I don't understand why you'd do this to yourself. After playing Overwatch in 144Hz there is no way of going back. Why do people play this game using a laggy pathetic mimic of a mouse when they could buy the PC version and experience true control with a buttery smooth mouse input. Oh yeah, it's because they are scared they'll fail when the playing field is equal and they do not innately have an advantage by using m/kb. No. You do not admit that because you're in denial, well how about the fact you've never played on a PC and sunk cost fallacy tells you to invest in over priced pieces of plastic (xim) instead of joining the meme masterrace.Do you normally join forums you stand against or are you that triggered from losing that you find the easiest scapegoat to be XIM4 to blame instead of yourself?
There's no value for the investment either, for me. 144Hz monitor and 144FPS capable graphic card most importantly... then all the rest of the junk CPU/RAM/HDD. All for a single game. Two games possibly, Titanfall2, but that game has no players on PC unfortunately.Yeah Im not wasting all that money on a PC for just one game.
I don't understand why you'd do this to yourself. After playing Overwatch in 144Hz there is no way of going back. Why do people play this game using a laggy pathetic mimic of a mouse when they could buy the PC version and experience true control with a buttery smooth mouse input. Oh yeah, it's because they are scared they'll fail when the playing field is equal and they do not innately have an advantage by using m/kb. No. You do not admit that because you're in denial, well how about the fact you've never played on a PC and sunk cost fallacy tells you to invest in over priced pieces of plastic (xim) instead of joining the meme masterrace.
Hey guys,
Is there any trick to get Hold to crouch instead of Toggle on Overwatch?
Lmao @ this salty guy. I as well have an Overkill PC and a PG279Q Monitor which extends over 144 hz. I Can run OW on epic no problem but you know why I invested in a XIM4? Because honestly yes I did want an advantage on PS4. BUT the main reason is i have so many friends on PS4, real and online. I dont feel like starting over on PC even though I been a PC gamer most of my life. As someone else stated, if you can't afford it dont knock it, because chances are a XIM4 is a fraction of the cost of a PC that can actually run OW well enough to give you that split second visual advantage.
Kid probably lost to someone with a scuf and immediately came to the XIM4 forums to cry wolf. You want to know what is the best part? On the first page of top 500 currently, they are ALL scuf users. I play against them every day and talk to them every day as well. Not a single one uses a XIM4. Just goes to show you can still be just as good or better without a XIM4. So what reason do you have to knock it now?
Lmao @ this salty guy. I as well have an Overkill PC and a PG279Q Monitor which extends over 144 hz. I Can run OW on epic no problem but you know why I invested in a XIM4? Because honestly yes I did want an advantage on PS4. BUT the main reason is i have so many friends on PS4, real and online. I dont feel like starting over on PC even though I been a PC gamer most of my life. As someone else stated, if you can't afford it dont knock it, because chances are a XIM4 is a fraction of the cost of a PC that can actually run OW well enough to give you that split second visual advantage.
Kid probably lost to someone with a scuf and immediately came to the XIM4 forums to cry wolf. You want to know what is the best part? On the first page of top 500 currently, they are ALL scuf users. I play against them every day and talk to them every day as well. Not a single one uses a XIM4. Just goes to show you can still be just as good or better without a XIM4. So what reason do you have to knock it now?
Which region you play on?
Lmao @ this salty guy. I as well have an Overkill PC and a PG279Q Monitor which extends over 144 hz. I Can run OW on epic no problem but you know why I invested in a XIM4? Because honestly yes I did want an advantage on PS4. BUT the main reason is i have so many friends on PS4, real and online. I dont feel like starting over on PC even though I been a PC gamer most of my life. As someone else stated, if you can't afford it dont knock it, because chances are a XIM4 is a fraction of the cost of a PC that can actually run OW well enough to give you that split second visual advantage.Ive seen a few M/GM vids for Overwatch... I would say, from what Ive witnessed. That there is zero skill differential from Platinum on up. The game itself is based on alot more than just individual ability. It's all team work, communication and strategy. The M/GM I have seen could be using default settings w/ stock controllers by the looks of it. Even XIM4 settings are not all created equal coupled w/ the addition of Dual Zone added to settings... XIM4 is definitely not creating any great gaps between m+kb vs controllers. XIM4 is just easier to blame than collectively learning from losses as a group. "They MUST be using M+KB" ...probly not. I seen a GM streamer create a smurf account and now doing the typical From Bronze to GrandMaster vids like others have done. Will never reach it.
Kid probably lost to someone with a scuf and immediately came to the XIM4 forums to cry wolf. You want to know what is the best part? On the first page of top 500 currently, they are ALL scuf users. I play against them every day and talk to them every day as well. Not a single one uses a XIM4. Just goes to show you can still be just as good or better without a XIM4. So what reason do you have to knock it now?
I decided to try to get to top500 with only Widowmaker. Mission succeeded ;D
http://imgur.com/a/XM0U9
I decided to try to get to top500 with only Widowmaker. Mission succeeded ;DSettings?
http://imgur.com/a/XM0U9
I decided to try to get to top500 with only Widowmaker. Mission succeeded ;DSettings?
http://imgur.com/a/XM0U9
Well that's amazing, if it was solo queue and not with friends.
After 100 hours of Widowmaker in S1 I had to switch to Ana for S3 because the moment I would pick Widowmaker in Ranked there would be instant whining, complaints, quitting or trolling by jumping off the map whole match.
Yeah it was all solo Q.
The problem was that Widowmaker has @#$% ton of counter heroes (I think she's the easiest hero to counter).
I didn't met many trollers luckily, sometimes we had 3 DPS heroes but those games were still winnable.
ADS Settings here: https://gyazo.com/0214d31bf4ecd8fbbe13d4bbccb67313 and https://gyazo.com/8933457d478f7dfd641eb1ea4741ac71
With SteadyAim05 and DPI 12k
Curve is from here: http://xim4.com/community/index.php?topic=31309.msg400143#msg400143
I only started using this recently so things might change once SA06 is out.Code: [Select]>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AA4cKDZCTlpkbniCjJagqrS+yMjI:X4MB
<<< XIM4 END PASTE <<<
I decided to try to get to top500 with only Widowmaker. Mission succeeded ;D
http://imgur.com/a/XM0U9
I decided to try to get to top500 with only Widowmaker. Mission succeeded ;D
http://imgur.com/a/XM0U9
I did the exact same on my smurf, got gm within 15 games widow only and by 50 games played I was top 500 at 4200
This is awesome! I have found no few widows, including ximmers who I trust in game on PS4. What you did is very impressive m8! I still hate widows though lol never lost to one especially in this meta, just quad tank and GG.
For the people saying it works so well... I'm at a loss.You can Turn:OFF or set it to whatever % you wish for Aim Assist in OW. The Division idk. I play OW w/ 0% AA
Lowering the DPI and Tick Rate helped getting rid of some of the stuttering but I still get excessive aim assist when I look in the general direction of an enemy.
For comparison, Destiny has aim assist but it is far less intrusive than The Division and Overwatch.
At this point, I might just try to play the game with a controller and try to compare how the game feels.
This probably won't work for all of you since I use a mouse and keyboard with a weird DPI and Polling
DPI - 1750
Polling - 1000hz
HIP - 114
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAoUHigyPktZan6axsjIyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
Logitech g900
Sony Nav Controller
Logitech g640 Mousepad
1000Polling
12000 DPI
Angle Snaping ON
Sens 12
Boost 1250
Steady Aim ON (3)
Aim Assist 90%
Works good for me
Are there so many Mouse & Keyboard Players on Console ?Yeah I think so
Logitech g900
Sony Nav Controller
Logitech g640 Mousepad
1000Polling
12000 DPI
Angle Snaping ON
Sens 12
Boost 1250
Steady Aim ON (3)
Aim Assist 90%
Works good for me
Logitech g900
Sony Nav Controller
Logitech g640 Mousepad
1000Polling
12000 DPI
Angle Snaping ON
Sens 12
Boost 1250
Steady Aim ON (3)
Aim Assist 90%
Works good for me
OMG Thanks for pointing out Angle Snapping! That increased my accuracy by almost 6%~10%!
XIM4 Settings
HIP Sens = 45-55 (I use 48) depends on what you like
X/Y ration 1,00
Boost = 0
Steady Aim = OFF
Mouse Settings - G502
DPI = 6,000
Pooling = 1,000
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1ABAdKzlIV2h4hpWktsjIyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
In Overwatch game Settings
Vertical Sens = 100
Horizontal Sens = 100
Aiming Mode = Exponential Ramp Mode
AA (Still tweaking this) = Really up to you. AA is fine for hit scanners but worse for projetile heroes.
Im 3580 atm.
XIM4 Settings
HIP Sens = 45-55 (I use 48) depends on what you like
X/Y ration 1,00
Boost = 0
Steady Aim = OFF
Mouse Settings - G502
DPI = 6,000
Pooling = 1,000
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1ABAdKzlIV2h4hpWktsjIyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
In Overwatch game Settings
Vertical Sens = 100
Horizontal Sens = 100
Aiming Mode = Exponential Ramp Mode
AA (Still tweaking this) = Really up to you. AA is fine for hit scanners but worse for projetile heroes.
Im 3580 atm.
Which heroes do you mainly play with with these settings?
Just got back to PS4 after a looong hiatus. Apparently Overwatch has been updated, and so has the XIM.
Are people using the normal, latest firmware? Or any of the release candidates? Overwatch primarily, but also BF1.
(I guess OW is a bit different since it doesn't use ADS)
Just got back to PS4 after a looong hiatus. Apparently Overwatch has been updated, and so has the XIM.
Are people using the normal, latest firmware? Or any of the release candidates? Overwatch primarily, but also BF1.
(I guess OW is a bit different since it doesn't use ADS)
Widowmaker and Ana use ADS lol
Just got back to PS4 after a looong hiatus. Apparently Overwatch has been updated, and so has the XIM.
Are people using the normal, latest firmware? Or any of the release candidates? Overwatch primarily, but also BF1.
(I guess OW is a bit different since it doesn't use ADS)
Widowmaker and Ana use ADS lol
Did you really not get what I meant?
Has anyone tried a profile based on the dual zone sensitivity
Halo 4 grants the player a relatively large analog stick range (about 90%) at a low rotation speed and without any smoothing. The idea, I think, is to give the player a large 'aiming range' where the stick position is honored immediately. Only with a full stick deflection of 90%-100% (the 'twitching range') does the shooter accelerate to the high speed required for target searching
I main Widow and Ana, with no aim assist and 800 dpi.
What curves are currently the best for getting rid of the blinking red light and making my turns consistent but accurate. As well as being able to 180 faster with relative mouse speed.
I main Widow and Ana, with no aim assist and 800 dpi.
Start using 8000 DPI not 800 DPI with the xim4, it's different from PC.QuoteWhat curves are currently the best for getting rid of the blinking red light and making my turns consistent but accurate. As well as being able to 180 faster with relative mouse speed.
Any extra acceleration in the curve would make it reach the turn limit even faster. You need to learn to move your hand just fast enough to turn quickly but without going over the limit too much.
When aiming my wrist rests on the mouse pad, and I make flicks or adjustments with the wrist.
When turning my wrist does not touch the mouse pad, my arm is planted on the desk around the elbow area and I make a large sweeping motion.
Steady Aim and Boost features were invented for some other games that had problems with aim assist and deadzones, you don't have to worry about them for Overwatch.
I'm a total first timer so I'm not sure what curves settings mean or how to gind the setting.
Also then I need to turn fast I move the mouse fast like you would on a PC but in the game it turns slower. Is this normal?
I'm using the Logitech G502 BTW
Please forgive my noob queston, but if I have ADS set up to right mouse button activation is this activating for all heroes? Do I need to switch between different profiles when using Widow/Ana vs. everyone else?
Please forgive my noob queston, but if I have ADS set up to right mouse button activation is this activating for all heroes? Do I need to switch between different profiles when using Widow/Ana vs. everyone else?
Yeah as long as u're using the same config all the time, ur ADS will activate for all heroes. I would recommend creating one config for Widow with ADS, one config for Ana with ADS and some more for different heroes like Soldier,Mcree etc. but without ADS
Please forgive my noob queston, but if I have ADS set up to right mouse button activation is this activating for all heroes? Do I need to switch between different profiles when using Widow/Ana vs. everyone else?
Yeah as long as u're using the same config all the time, ur ADS will activate for all heroes. I would recommend creating one config for Widow with ADS, one config for Ana with ADS and some more for different heroes like Soldier,Mcree etc. but without ADS
Thank you for the reply. When creating different profiles, how do you activate the different profiles? Do I need to go into Xim Manager and switch one on before changing heroes?
Not sure if someone can help out with a few things:
1) I would like to play with fellow XIM players on PS4. I started at 1500s and climbed to 2400 but am back down to 1900 due to really bad teammates. I have decent game sense, polite on the mic, and just want a good team to win together with. I know it's not about the gold medals, it's about working together, combining ults, communicating, and I have all of that -- just missing the team mates! (it helps that I'm averaging over 40 elims per game though! :))
2) I am using a 4000dpi mouse (steel series 100 rival). Working okay, but I'm def using my wrist instead of whole arm... but it isn't bothering me and I'm getting really good tracking/aiming -- but my xim4 sensitivity is like up to 55..... does that make sense technilically speaking if I'm on a 4000dpi mouse?
3) What is the "best" hero to use with a xim4 to pure dominate in your opinion? For what I've tested in the past 2 weeks, it would be soldier, bastion, zarya, and mei with AA cranked to 100 -- anyone else feel the same? I've tried widowmaker but it brings way to much toxicity from teammates so I don't even bother
4) xim4 boost settings is at 300 (not sure what this does, read it in someone elses settings.... )
Not sure if someone can help out with a few things:
1) I would like to play with fellow XIM players on PS4. I started at 1500s and climbed to 2400 but am back down to 1900 due to really bad teammates. I have decent game sense, polite on the mic, and just want a good team to win together with. I know it's not about the gold medals, it's about working together, combining ults, communicating, and I have all of that -- just missing the team mates! (it helps that I'm averaging over 40 elims per game though! :))
2) I am using a 4000dpi mouse (steel series 100 rival). Working okay, but I'm def using my wrist instead of whole arm... but it isn't bothering me and I'm getting really good tracking/aiming -- but my xim4 sensitivity is like up to 55..... does that make sense technilically speaking if I'm on a 4000dpi mouse?
3) What is the "best" hero to use with a xim4 to pure dominate in your opinion? For what I've tested in the past 2 weeks, it would be soldier, bastion, zarya, and mei with AA cranked to 100 -- anyone else feel the same? I've tried widowmaker but it brings way to much toxicity from teammates so I don't even bother
4) xim4 boost settings is at 300 (not sure what this does, read it in someone elses settings.... )
I am in the same boat as you was 2024 now gone back down to around 1650 it's so fustrating as no one works as a team.
Just before the new season starts I will contact you and maybe we can group up?
Please forgive my noob queston, but if I have ADS set up to right mouse button activation is this activating for all heroes? Do I need to switch between different profiles when using Widow/Ana vs. everyone else?
Yeah as long as u're using the same config all the time, ur ADS will activate for all heroes. I would recommend creating one config for Widow with ADS, one config for Ana with ADS and some more for different heroes like Soldier,Mcree etc. but without ADS
Thank you for the reply. When creating different profiles, how do you activate the different profiles? Do I need to go into Xim Manager and switch one on before changing heroes?
U can set up a hot key for every profile in the upper left corner of the config on ur smartphone app :) And it's not important when u click ur hotkey u don't have to neccessarily do it before u change the hero. U can do it before, meanwhile or afterwards :)
Please forgive my noob queston, but if I have ADS set up to right mouse button activation is this activating for all heroes? Do I need to switch between different profiles when using Widow/Ana vs. everyone else?
Yeah as long as u're using the same config all the time, ur ADS will activate for all heroes. I would recommend creating one config for Widow with ADS, one config for Ana with ADS and some more for different heroes like Soldier,Mcree etc. but without ADS
Thank you for the reply. When creating different profiles, how do you activate the different profiles? Do I need to go into Xim Manager and switch one on before changing heroes?
U can set up a hot key for every profile in the upper left corner of the config on ur smartphone app :) And it's not important when u click ur hotkey u don't have to neccessarily do it before u change the hero. U can do it before, meanwhile or afterwards :)
Thanks again! Does the xim flash when a new profile is activated? Also, if I press the hotkey again will it turn it off? Thanks!
After looking through a lot of this forum, I came to the conclusion we don't necessarily need curves? I saw with and some without, I saw some such as Henry's curve but this was from a while back and I'm not sure if it's up to date or not. I'm getting this game tomorrow btw so I'm just trying to be prepared. Thanks
Hey I was wondering if it was possible for someone to give me a good setup for 76,tracer, or Ana?
I've been holding onto this set up for a long time and I would like to pass it on to you guys. In game settings ""REDO INGAME SETTINGS EVERY TIME YOU LOG IN!"" 100h /100v AA: 0 for Pharah and Junkrat, everyone else 95. Exponential Ramp. MOUSE G502 10,000 DPI 1000 Pooling also turn on Angle Snapping in your mouse settings. If you don't know how , just plug in your mouse to the computer click the Settings button to the bottom right go to G502 tab and enable Angle Snapping.
My Xim4 Settings
HIP
(https://image.ibb.co/bx85wF/16976391_10210281408165550_1409484011_n.png)
ADS
(https://image.ibb.co/bNq4Ov/17005998_10210281407365530_1314085476_n.png)
CURVE
HIP/ADS
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1ABw4VWuBkJyns73IyMjIyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
Also a little advice if you want to slow down your aim hold Left mouse button while holding the trigger right click and hold the Right mouse button afterwords. it will use ADS Speed and will allow you to slow down aim in case you need it. works with most. (MAKE SURE YOU HOLD THEM BOTH DOWN FOR IT TO WORK AS LONG AS YOU HOLD THE FIRE BUTTON FIRST IT WILL NOT USE SECONDARY)
How come we would have to redo in game settings everytime we have to log on?
How come we would have to redo in game settings everytime we have to log on?
There was a bug in Overwatch where your custom settings are reset to default even though the sliders in the settings menu are still claiming that your custom settings are active. This bug was (supposedly) fixed with the game update that was released yesterday.
Hey all, here is my curve. This is my variation of henrys curve tweaked in a few spots slightly for better blending on the curve drop acceleration.
It's a great curve for wristy high sens players (well, for me it's good for others maybe not their cup of tea)
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAoVHyo0P0lUXmlvcnV4e36BhIeL:X4MB
<<< XIM4 END PASTE <<<
Xim settings: 4.50 x/y 1.00 Boost 0 Steady aim off
I use Logitech g502 mouse on 10000 sensitivity and 500hz polling rate.
In game horizontal and vertical 100 with ranging from 70-100 aim assist depending on the hero.
It's still a work in progress, but I seem to play and track targets well with a slightly higher starting point on the curve.
I main tracer just in case anyone wanted that info too.
I hope you enjoy!
How come we would have to redo in game settings everytime we have to log on?
There was a bug in Overwatch where your custom settings are reset to default even though the sliders in the settings menu are still claiming that your custom settings are active. This bug was (supposedly) fixed with the game update that was released yesterday.
Really???????????????????? This would explain my extreme inconsistent play last season and how broken season 3 was. I reached 4500 with broken inconsistent settings due to a friggin ow bug. Wonder what i can do this season... thinking emoji
How come we would have to redo in game settings everytime we have to log on?
There was a bug in Overwatch where your custom settings are reset to default even though the sliders in the settings menu are still claiming that your custom settings are active. This bug was (supposedly) fixed with the game update that was released yesterday.
Really???????????????????? This would explain my extreme inconsistent play last season and how broken season 3 was. I reached 4500 with broken inconsistent settings due to a friggin ow bug. Wonder what i can do this season... thinking emoji
Hey Size. Do you use your Settings with 1500 Boost at the moment? Or did you change your Settings?
I tested a lot of different Settings without a Curve...but the movements are to slow for me.
Today il test it with my new Mouse, the G900. Should i use it with 12000DPI or lower?
Hey all, here is my curve. This is my variation of henrys curve tweaked in a few spots slightly for better blending on the curve drop acceleration.
It's a great curve for wristy high sens players (well, for me it's good for others maybe not their cup of tea)
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAoVHyo0P0lUXmlvcnV4e36BhIeL:X4MB
<<< XIM4 END PASTE <<<
Xim settings: 4.50 x/y 1.00 Boost 0 Steady aim off
I use Logitech g502 mouse on 10000 sensitivity and 500hz polling rate.
In game horizontal and vertical 100 with ranging from 70-100 aim assist depending on the hero.
It's still a work in progress, but I seem to play and track targets well with a slightly higher starting point on the curve.
I main tracer just in case anyone wanted that info too.
I hope you enjoy!
If it helps I play this on ~8-9 with 1500 boost and SA3 on, maining tracer, mcree and soldier.
If it helps I play this on ~8-9 with 1500 boost and SA3 on, maining tracer, mcree and soldier.
How do you like SA3? I've thought about messing with the SA's but it seems like a pita to reflash the Xim4 everytime I want to change it.
Just confirming guys Xbox overwatch St is currently at 1.2? Is that right? I already forced download but not sure if this is the current one
Sent from my E6653 using Tapatalk
For starting, where do I change the DPI from my mouse? I´m using the Logitech G502
QuoteFor starting, where do I change the DPI from my mouse? I´m using the Logitech G502
You need access to a PC with Microsoft Windows. You install "Logitech Gaming Software" which is a manager for all the Logitech peripherals.
You choose your DPI settings and you save it to the on-board memory of the mouse. After that you don't need the PC any more.
And how do I change the HIP?
And how do I change the HIP?
This is a strange question, because you either already have Overwatch profile loaded to your xim4, or you don't and you are asking in advance how to change aiming sensitivity for the hip.
When you load an Overwatch profile to your xim4 from the manager, the very first configuration screen is for hip look/aim. In the section called "Mouse" you set your sensitivity, by default it starts at 40.0, change that number to what ever you want.
Are you really asking how to enter configuration again? Click on the icon in the top left corner, above the Overwatch picture, that looks like a pencil writing into an empty square.
Im really struggling so far. I main tracer and im using Henrys cfg but i changed it a bit. I use 4000dpi which is the maximum my mouse will go, its a steelseries rival 100.
I use 1250 boost, steady aim and henrys curve. My sens is 25.50 but idk it feels very weird. So far im waaay better with a controller but ive only been playing for a day.
Any suggestions?
EDIT : I played a game with soldier with no advanced settings. no curve no boost steady aim off and 19.5 sens on xim. Im gonna try a game with steady aim on now
Im really struggling so far. I main tracer and im using Henrys cfg but i changed it a bit. I use 4000dpi which is the maximum my mouse will go, its a steelseries rival 100.
I use 1250 boost, steady aim and henrys curve. My sens is 25.50 but idk it feels very weird. So far im waaay better with a controller but ive only been playing for a day.
Any suggestions?
EDIT : I played a game with soldier with no advanced settings. no curve no boost steady aim off and 19.5 sens on xim. Im gonna try a game with steady aim on now
i use a similar config with 5600 dpi and xim sense 22 but i see you said you've only been playing for a day so that's probably the "issue" probably just need to get more use to using m&kb.
and what is it that feels weird exactly?
Im really struggling so far. I main tracer and im using Henrys cfg but i changed it a bit. I use 4000dpi which is the maximum my mouse will go, its a steelseries rival 100.
I use 1250 boost, steady aim and henrys curve. My sens is 25.50 but idk it feels very weird. So far im waaay better with a controller but ive only been playing for a day.
Any suggestions?
EDIT : I played a game with soldier with no advanced settings. no curve no boost steady aim off and 19.5 sens on xim. Im gonna try a game with steady aim on now
i use a similar config with 5600 dpi and xim sense 22 but i see you said you've only been playing for a day so that's probably the "issue" probably just need to get more use to using m&kb.
and what is it that feels weird exactly?
Yeah i definitely need more practice for sure.
It just feels very unnatural. I found a new curve and play with 500 boost and steady aim on and so far its going pretty well. I just dont feel confident enough jumping in a comp yet. Im 3300 sr
Im really struggling so far. I main tracer and im using Henrys cfg but i changed it a bit. I use 4000dpi which is the maximum my mouse will go, its a steelseries rival 100.
I use 1250 boost, steady aim and henrys curve. My sens is 25.50 but idk it feels very weird. So far im waaay better with a controller but ive only been playing for a day.
Any suggestions?
EDIT : I played a game with soldier with no advanced settings. no curve no boost steady aim off and 19.5 sens on xim. Im gonna try a game with steady aim on now
i use a similar config with 5600 dpi and xim sense 22 but i see you said you've only been playing for a day so that's probably the "issue" probably just need to get more use to using m&kb.
and what is it that feels weird exactly?
Yeah i definitely need more practice for sure.
It just feels very unnatural. I found a new curve and play with 500 boost and steady aim on and so far its going pretty well. I just dont feel confident enough jumping in a comp yet. Im 3300 sr
yea I don't blame you I made a alt account just to practice but yeah console overwatch aiming mechanics is the worst for xim but it can work. I recently started using Henry's curve and its the best curve for overwatch in my opinion. Throughout all the post ive seen that most people have their boost set on 1250 some higher to give your aim a "snappy" feeling.
Im really struggling so far. I main tracer and im using Henrys cfg but i changed it a bit. I use 4000dpi which is the maximum my mouse will go, its a steelseries rival 100.
I use 1250 boost, steady aim and henrys curve. My sens is 25.50 but idk it feels very weird. So far im waaay better with a controller but ive only been playing for a day.
Any suggestions?
EDIT : I played a game with soldier with no advanced settings. no curve no boost steady aim off and 19.5 sens on xim. Im gonna try a game with steady aim on now
i use a similar config with 5600 dpi and xim sense 22 but i see you said you've only been playing for a day so that's probably the "issue" probably just need to get more use to using m&kb.
and what is it that feels weird exactly?
Yeah i definitely need more practice for sure.
It just feels very unnatural. I found a new curve and play with 500 boost and steady aim on and so far its going pretty well. I just dont feel confident enough jumping in a comp yet. Im 3300 sr
yea I don't blame you I made a alt account just to practice but yeah console overwatch aiming mechanics is the worst for xim but it can work. I recently started using Henry's curve and its the best curve for overwatch in my opinion. Throughout all the post ive seen that most people have their boost set on 1250 some higher to give your aim a "snappy" feeling.
is henrys curve really good? I heard people saying its not good anymore but idk i might try it again. If i use his curve what boost should i set? steady aim on or off? and also what hz should i use? 500 or 1000? Thanks
Im really struggling so far. I main tracer and im using Henrys cfg but i changed it a bit. I use 4000dpi which is the maximum my mouse will go, its a steelseries rival 100.
I use 1250 boost, steady aim and henrys curve. My sens is 25.50 but idk it feels very weird. So far im waaay better with a controller but ive only been playing for a day.
Any suggestions?
EDIT : I played a game with soldier with no advanced settings. no curve no boost steady aim off and 19.5 sens on xim. Im gonna try a game with steady aim on now
i use a similar config with 5600 dpi and xim sense 22 but i see you said you've only been playing for a day so that's probably the "issue" probably just need to get more use to using m&kb.
and what is it that feels weird exactly?
Yeah i definitely need more practice for sure.
It just feels very unnatural. I found a new curve and play with 500 boost and steady aim on and so far its going pretty well. I just dont feel confident enough jumping in a comp yet. Im 3300 sr
yea I don't blame you I made a alt account just to practice but yeah console overwatch aiming mechanics is the worst for xim but it can work. I recently started using Henry's curve and its the best curve for overwatch in my opinion. Throughout all the post ive seen that most people have their boost set on 1250 some higher to give your aim a "snappy" feeling.
is henrys curve really good? I heard people saying its not good anymore but idk i might try it again. If i use his curve what boost should i set? steady aim on or off? and also what hz should i use? 500 or 1000? Thanks
What Henry's curve does is that it allows you to move your mouse faster without reaching the speed limit for overwatch. so if you wanna make fast movements with your mouse the curve allows you to do so without the red flash from the xim. without the curve you would hit the speed limit for overwatch in which the xim wouldn't recognize your input and that would throw you aim off for a bit.
Most people set their boost to 1250 but i would say start from about 500 then raise to to your liking from there. (mine is at 1250)
I've tried polling at 500 and 1000 never really noticed a difference so i guess whichever is fine
and from what I know steady aim is used for cod (to fight its aim assist) but doesn't have any use in any other game as far as i know (I might be wrong) either way I've tested it myself and seen no difference with it on or off
Im really struggling so far. I main tracer and im using Henrys cfg but i changed it a bit. I use 4000dpi which is the maximum my mouse will go, its a steelseries rival 100.
I use 1250 boost, steady aim and henrys curve. My sens is 25.50 but idk it feels very weird. So far im waaay better with a controller but ive only been playing for a day.
Any suggestions?
EDIT : I played a game with soldier with no advanced settings. no curve no boost steady aim off and 19.5 sens on xim. Im gonna try a game with steady aim on now
i use a similar config with 5600 dpi and xim sense 22 but i see you said you've only been playing for a day so that's probably the "issue" probably just need to get more use to using m&kb.
and what is it that feels weird exactly?
Yeah i definitely need more practice for sure.
It just feels very unnatural. I found a new curve and play with 500 boost and steady aim on and so far its going pretty well. I just dont feel confident enough jumping in a comp yet. Im 3300 sr
yea I don't blame you I made a alt account just to practice but yeah console overwatch aiming mechanics is the worst for xim but it can work. I recently started using Henry's curve and its the best curve for overwatch in my opinion. Throughout all the post ive seen that most people have their boost set on 1250 some higher to give your aim a "snappy" feeling.
is henrys curve really good? I heard people saying its not good anymore but idk i might try it again. If i use his curve what boost should i set? steady aim on or off? and also what hz should i use? 500 or 1000? Thanks
What Henry's curve does is that it allows you to move your mouse faster without reaching the speed limit for overwatch. so if you wanna make fast movements with your mouse the curve allows you to do so without the red flash from the xim. without the curve you would hit the speed limit for overwatch in which the xim wouldn't recognize your input and that would throw you aim off for a bit.
Most people set their boost to 1250 but i would say start from about 500 then raise to to your liking from there. (mine is at 1250)
I've tried polling at 500 and 1000 never really noticed a difference so i guess whichever is fine
and from what I know steady aim is used for cod (to fight its aim assist) but doesn't have any use in any other game as far as i know (I might be wrong) either way I've tested it myself and seen no difference with it on or off
Okay thanks. My boost is now at 1250 and ill turn steady aim off. The curve isnt bad so far but man im losing all my games its unreal....i lost like 250sr in an hour i really dont know how i feel about that xim4. It really seems like its not made for overwatch....anyway ill give it another try and use it for a bit longer to see if i can get used to it but so far im way better with a controller for sure...Thanks for the advice anyway
Im really struggling so far. I main tracer and im using Henrys cfg but i changed it a bit. I use 4000dpi which is the maximum my mouse will go, its a steelseries rival 100.
I use 1250 boost, steady aim and henrys curve. My sens is 25.50 but idk it feels very weird. So far im waaay better with a controller but ive only been playing for a day.
Any suggestions?
EDIT : I played a game with soldier with no advanced settings. no curve no boost steady aim off and 19.5 sens on xim. Im gonna try a game with steady aim on now
i use a similar config with 5600 dpi and xim sense 22 but i see you said you've only been playing for a day so that's probably the "issue" probably just need to get more use to using m&kb.
and what is it that feels weird exactly?
Yeah i definitely need more practice for sure.
It just feels very unnatural. I found a new curve and play with 500 boost and steady aim on and so far its going pretty well. I just dont feel confident enough jumping in a comp yet. Im 3300 sr
yea I don't blame you I made a alt account just to practice but yeah console overwatch aiming mechanics is the worst for xim but it can work. I recently started using Henry's curve and its the best curve for overwatch in my opinion. Throughout all the post ive seen that most people have their boost set on 1250 some higher to give your aim a "snappy" feeling.
is henrys curve really good? I heard people saying its not good anymore but idk i might try it again. If i use his curve what boost should i set? steady aim on or off? and also what hz should i use? 500 or 1000? Thanks
What Henry's curve does is that it allows you to move your mouse faster without reaching the speed limit for overwatch. so if you wanna make fast movements with your mouse the curve allows you to do so without the red flash from the xim. without the curve you would hit the speed limit for overwatch in which the xim wouldn't recognize your input and that would throw you aim off for a bit.
Most people set their boost to 1250 but i would say start from about 500 then raise to to your liking from there. (mine is at 1250)
I've tried polling at 500 and 1000 never really noticed a difference so i guess whichever is fine
and from what I know steady aim is used for cod (to fight its aim assist) but doesn't have any use in any other game as far as i know (I might be wrong) either way I've tested it myself and seen no difference with it on or off
Okay thanks. My boost is now at 1250 and ill turn steady aim off. The curve isnt bad so far but man im losing all my games its unreal....i lost like 250sr in an hour i really dont know how i feel about that xim4. It really seems like its not made for overwatch....anyway ill give it another try and use it for a bit longer to see if i can get used to it but so far im way better with a controller for sure...Thanks for the advice anyway
No its not the xims fault its blizzards fault for a terrible aiming mechanic for the console version. The thing you have to keep in mind is that your not gonna become "godlike" overnight. Almost everybody here can tell you they did way worst before they got better. when i first got xim in season two i dropped from masters (around 3700) to low diamond and i thought about getting rid of my xim as well but i stuck to it now this season so far i have two accounts in grand master and one that's high master (all 3 i solo q). you still have to get over the learning curve as well with m&kb on console by developing muscle memory and game awareness. Its rough at the start but put in some work and you'll climb eventually.
Is it allowed to use Xim4 in Overwatch?
people always send me messages saying you will reported and stuff
It's actually considered cheating. We as xim players don't admit it but technically it's cheating. It's cheating because well..its because we're using mouse and keyboard even though the xim only translates the input from controller to M&k. Therefore the precision is there. Now there would be a lot of us would be denying after my post to counter the arguement.
Sent from my E6653 using Tapatalk
A controller is a controller bro. Don't know much about scuff but it looks like it's just modified friction for the thumbs and extra things. But yeah u can modified to physical appearance but a controller is a controller. Mouse is more precise when it comes to aiming and much faster
Sent from my E6653 using Tapatalk
So I got to play ow on the PC for the first time. The only thing that really felt different was the keyboard. When you A and D on PC you could do micro movement side strafing. With the xim 4 it feels like a side jump. Is there a way to fix this?
Yeah im definitely switching to PC after school. Im losing all hope with this xim4. Its an amazing product but overwatch isnt good to use it. Ive been on a constant loss streak, losing more sr than ever and im trying all the settings, curve on off, boost, steady aim, aim assist...i just cant. And impossible to find any players to play with on ps4 in this community, almost as if people are avoiding each other... On cod it feels like PC almost its really good but man on overwatch its unreal how hard it is to get used to....Like it takes 27 mouse movement to do a 180 if someone is shooting at you from the back...its unreal...
So I got to play ow on the PC for the first time. The only thing that really felt different was the keyboard. When you A and D on PC you could do micro movement side strafing. With the xim 4 it feels like a side jump. Is there a way to fix this?
side jump? nope never had that issueYeah im definitely switching to PC after school. Im losing all hope with this xim4. Its an amazing product but overwatch isnt good to use it. Ive been on a constant loss streak, losing more sr than ever and im trying all the settings, curve on off, boost, steady aim, aim assist...i just cant. And impossible to find any players to play with on ps4 in this community, almost as if people are avoiding each other... On cod it feels like PC almost its really good but man on overwatch its unreal how hard it is to get used to....Like it takes 27 mouse movement to do a 180 if someone is shooting at you from the back...its unreal...
Idk what the deal is either but xim played don't usually play with others as far as i know but the ones that are willing to play are usually lower ranked. maybe they don't want more ppl knowing their using xim. doesn't matter much to me tho i solo q most of the time anyway.
So I got to play ow on the PC for the first time. The only thing that really felt different was the keyboard. When you A and D on PC you could do micro movement side strafing. With the xim 4 it feels like a side jump. Is there a way to fix this?
side jump? nope never had that issueYeah im definitely switching to PC after school. Im losing all hope with this xim4. Its an amazing product but overwatch isnt good to use it. Ive been on a constant loss streak, losing more sr than ever and im trying all the settings, curve on off, boost, steady aim, aim assist...i just cant. And impossible to find any players to play with on ps4 in this community, almost as if people are avoiding each other... On cod it feels like PC almost its really good but man on overwatch its unreal how hard it is to get used to....Like it takes 27 mouse movement to do a 180 if someone is shooting at you from the back...its unreal...
Idk what the deal is either but xim played don't usually play with others as far as i know but the ones that are willing to play are usually lower ranked. maybe they don't want more ppl knowing their using xim. doesn't matter much to me tho i solo q most of the time anyway.
I enjoy solo q as well but im tired of losing 10+ games a day and losing 3 to 4 times the sr i win. So i want xim4 user on my team to start destroying the ennemy team cause im tired of losing. Its extremely frustrating for someone that is very competitive like me. People are just not good. Im better with DPS but i try to fill in to make the team more balanced but i always end up with @#$% retarded kids that want to play genji or widow no matter what. I lost another 150sr today solo q. This game is just poorly designed and leaves no room for improvement. Losing more sr on a loss streak? How the hell is that even a thing?
any tips for getting more crits with soldier. Overbuff show me at 3% only now. Feels to low, but maybe it is just fine. Feedback is appreciated :D
Using 12k dpi
1250 boost
95% aim assist
no curve
PSN: giootje30
Hello,
any tips to improve the "feeling" with Soldier on PS4? BF1 feels soooo much better....
What firmware version do you guys use? What do they mean by "ST"?
Thanks
any tips for getting more crits with soldier. Overbuff show me at 3% only now. Feels to low, but maybe it is just fine. Feedback is appreciated :D
Using 12k dpi
1250 boost
95% aim assist
no curve
PSN: giootje30
just more pratice really but one thing that may help some is lowering your AA with him slightly. That would allow you to move your cursor a bit easier for the headshot.
any tips for getting more crits with soldier. Overbuff show me at 3% only now. Feels to low, but maybe it is just fine. Feedback is appreciated :D
Using 12k dpi
1250 boost
95% aim assist
no curve
PSN: giootje30
just more pratice really but one thing that may help some is lowering your AA with him slightly. That would allow you to move your cursor a bit easier for the headshot.Hello,
any tips to improve the "feeling" with Soldier on PS4? BF1 feels soooo much better....
What firmware version do you guys use? What do they mean by "ST"?
Thanks
Well theres no way for overwatch to feel as good as bf1 but curves and boost can help some. Having your boost high like around 1250 can give you a more snappy feeling.
zombies curve might help
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AAsWIjBBVGyHpcjIyMjIyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
Even though i feel like with with the latest updates its not necessary.
Super excited but also not sure what settings I should be running.
can anyone tell me whats the sense behind henry curve. I tryed it, and in my settings the movement slows down on a quick mouse movement. now im using kind of a opposit curve and it works so great while turning around.
Gesendet von iPhone mit Tapatalk
thanks for the reply, I sifted through the forums some and saw people posting for example "widow config" is that recommend for each character you play. Like for every hero am I gonna need to really tweak the settings a whole bunchQuoteSuper excited but also not sure what settings I should be running.
You will create Overwatch "profile" in the xim4 manager, you will bind a few keyboard buttons to your liking and it is ready to go, tuned by xim4 developers for this game.
(Except for the mouse sensitivity value which will default to number "40" and you will want to tune that number up or down to something that feels good to you.)
When you practice in the training range and play Quickplay for a few days or weeks if you happen to notice any specific problems with your mouse aiming then you have a few advanced settings at your disposal to try and address those problems.
You don't have to deviate those advanced settings from the defaults if you don't have any problems (if you get this nagging feeling that you are missing out on something big because you didn't deviate advanced settings from the defaults ignore it, you're not).
people posting for example "widow config" is that recommend for each character you play. Like for every hero am I gonna need to really tweak the settings a whole bunch
people posting for example "widow config" is that recommend for each character you play. Like for every hero am I gonna need to really tweak the settings a whole bunch
Widowmaker (and Ana) are special because they have ADS mode (Aim Down Sights) and other characters do not. In the xim4 manager Overwatch profile you will have a separate page for ADS mode where you will configure sensitivity for ADS mode.
If we ignore ADS characters for a moment... Overwatch is a game that's kind of divided on precision and non-precision characters. In that sense you may indeed want to make multiple Overwatch profiles -- for example, one for Tracer/Reaper/Genji/Reinheardt with very high sensitivity so you can turn around quickly and spray and one for McCree and Hanzo with lower sensitivity so you can hit headshots at a distance more easily.
But there's an alternative way to achieve the same. Many modern mice allow you to switch your DPI on the fly. That way you can have a single Overwatch profile with a single sensitivity value. When you play Tracer you press the DPI switch on your mouse up to 12000DPI (or whatever value) and when you play McCree you shift it down to 8200DPI (or whatever value).
tan(46 [Sniper zoom 5x is half of FOV] / 2 deg) / tan(92 [Console FOV] / 2 deg) * 100 = 40.991 = 41 round
Thanks again for the reply. How many profiles would you recommend, I'm pretty versatile in my hero selection since sometime I'll play flex for my team.people posting for example "widow config" is that recommend for each character you play. Like for every hero am I gonna need to really tweak the settings a whole bunch
Widowmaker (and Ana) are special because they have ADS mode (Aim Down Sights) and other characters do not. In the xim4 manager Overwatch profile you will have a separate page for ADS mode where you will configure sensitivity for ADS mode.
If we ignore ADS characters for a moment... Overwatch is a game that's kind of divided on precision and non-precision characters. In that sense you may indeed want to make multiple Overwatch profiles -- for example, one for Tracer/Reaper/Genji/Reinheardt with very high sensitivity so you can turn around quickly and spray and one for McCree and Hanzo with lower sensitivity so you can hit headshots at a distance more easily.
But there's an alternative way to achieve the same. Many modern mice allow you to switch your DPI on the fly. That way you can have a single Overwatch profile with a single sensitivity value. When you play Tracer you press the DPI switch on your mouse up to 12000DPI (or whatever value) and when you play McCree you shift it down to 8200DPI (or whatever value).
can anyone tell me whats the sense behind henry curve. I tryed it, and in my settings the movement slows down on a quick mouse movement. now im using kind of a opposit curve and it works so great while turning around.
Gesendet von iPhone mit Tapatalk
raise your xim sense some that should help
Using only Hip sensitivity and calibrating ADS with character specific game settings is definitely an option.
I just wouldn't recommend it as the "best available option". Anything below 100 for "Relative Aim Sensitivity When Zoomed" further reduces the turn speed. Also if someone is trying to achieve 1:1 pixel ratio between Hip and ADS the most accurate I could get it is when Hip and ADS in the game behaved equally, then setting xim4 ADS sensitivity to 41% of personal xim4 Hip sensitivity.
Explanation of numbers is between "[]"Quotetan(46 [Sniper zoom 5x is half of FOV] / 2 deg) / tan(92 [Console FOV] / 2 deg) * 100 = 40.991 = 41 round
That formula helps a lot. But how do we go about discovering the hip and the ads fov? Is there a way to calculate that?
Thinking about applying it to other games.
It feels too floaty like I can't be precise, it's really annoying, anyone know of anything so I can improve it
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANQAxADEAMgAwAAQJDRIXGyAkKS4yNztARUlOUldc:X4MB
<<< XIM4 END PASTE <<<
can anyone tell me whats the sense behind henry curve. I tryed it, and in my settings the movement slows down on a quick mouse movement. now im using kind of a opposit curve and it works so great while turning around.
Gesendet von iPhone mit Tapatalk
raise your xim sense some that should help
Hey man, I read your post in another thread that seems to have been deleted that you have lowered your DPI to 3200? Is this with the G900? If so, what hip sens are you running?
I'm also running the G900, and after reading the Widow config thread about cloth mouse pads being better on lower DPI, I changed my DPI from 12000 to 6000 and noticed a big difference in precision and control.
I find the aiming to feel so "floaty" on overwatch..
I have G502 12K DPI
XIM Sensitivity 30
No Curve
No Steady Aim
No Boost
Aim Assist 90
It feels too floaty like I can't be precise, it's really annoying, anyone know of anything so I can improve it because I am tempted to get rid of the game tomorrow as it frustrates me more than anything.
Any tips for my set up?
>>> XIM4 [Mouse Ballistics] START PASTE >>>
X4MB:AAAAGgA0AC4AMAAwAC4AMgAwADEANgAwADQAMAA1AEKFyMjIyMjIyMjIyMjIyMjIyMjI:X4MB
<<< XIM4 END PASTE <<<
That formula helps a lot. But how do we go about discovering the hip and the ads fov? Is there a way to calculate that?
Thinking about applying it to other games.
I'm not sure how to determine a game's field of view. Some have it in the menu to change (Titanfall2), for some where it's locked developers of the game say what it is (Overwatch 92, Destiny 72).
One problem is most games are not like Overwatch where you can define your ADS sensitivity to be equal to hip. Destiny has only one sensitivity value and automatically reduces your ADS speed can't be avoided. Battlefield has that "universal soldier aiming" system, or something called like that.
When we play multiple games we want to have identical sensitivity among them but they have different FOV, different sensitivity settings and different look mechanics. Best we can do between games that are so much different is "calibrating to a point".
In Overwatch training you pick a focal point on some wall and line up the crosshair with it. Then you imagine what is the distance of your average flick shot, remember that second point on the screen and measure the distance between focal point and that second point. Then you measure how much your mouse moved from edge of the mouse pad to reach from focal point to the second point.
Titanfall runs at same resolution and can use same FOV, tweak sensitivity until it moves as much as Overwatch, then I shift FOV down to 72 write down those values and go to Destiny locked at 72 to verify with 4.9x sniper (there's no 5x in that game).
This is only going to be accurate up to around that point, the further you are from it the more they will deviate... so choosing an average flick distance earlier is a good average to go on.
I Play on pc and bought a xim4, Is there any way i can get close to the settings i use on pc for ps4?
i know it wont be perfect but I would like to know how i would go about replicating my pc settings if possible.
I use a logitech g900
1000 polling
1800 DPI
and 8 sens in game.
any help would be appreciated.
Am I really the only one here who thinks the AimAssist is strange since this orisa update? :o
Am I really the only one here who thinks the AimAssist is strange since this orisa update? :o
Strange in what sense?
I was missing some shots yesterday which I would swear went right through opponents
I thought you were supposed to disable aim assist when using a XIM? As it feels more like playing on a PC without it?
I thought you were supposed to disable aim assist when using a XIM? As it feels more like playing on a PC without it?
Generally speaking yes it is detrimental to precision.
But it varies, it could be an on/off switch (like in Mass Effect) or it could be a scale (like in Overwatch).
Overwatch console aiming acceleration is not the greatest, but because aim assist is a scale a little amount of its crosshair slowdown can help you sense when you are on target and not overshoot as much.
I thought you were supposed to disable aim assist when using a XIM? As it feels more like playing on a PC without it?
Generally speaking yes it is detrimental to precision.
But it varies, it could be an on/off switch (like in Mass Effect) or it could be a scale (like in Overwatch).
Overwatch console aiming acceleration is not the greatest, but because aim assist is a scale a little amount of its crosshair slowdown can help you sense when you are on target and not overshoot as much.
Most of the people ive talked to here that are grand master and above all play with with at least 90 aim assist.
On my part since ive got the xim4 i dont think ive ever been on a biggest loss streak. Going for 10 loss a day with usually 45+ kills a day....considering about switching to pc
Here are some people who described the issue in detail :)
Source : https://www.reddit.com/r/OWConsole/comments/62cooh/huge_aim_bugglitch_tryed_everything/?st=J0ZAB61R&sh=441be4bc
- shared from the Reddit app (https://reddit.app.link/3CsFK8W7iB)
https://www.reddit.com/r/OWConsole/comments/62m4d3/aiming_bugs_are_back_and_nobody_cares/?st=J0ZB7710&sh=fdee6339
- shared from the Reddit app (https://reddit.app.link/3CsFK8W7iB)
Here are some people who described the issue in detail :)
Source : https://www.reddit.com/r/OWConsole/comments/62cooh/huge_aim_bugglitch_tryed_everything/?st=J0ZAB61R&sh=441be4bc
- shared from the Reddit app (https://reddit.app.link/3CsFK8W7iB)
https://www.reddit.com/r/OWConsole/comments/62m4d3/aiming_bugs_are_back_and_nobody_cares/?st=J0ZB7710&sh=fdee6339
- shared from the Reddit app (https://reddit.app.link/3CsFK8W7iB)
so what exactly is the bug?
the guy doesnt explain it at all and only refers to two videos in which he doesnt explain anything too
all you see is a guy trying to make circles and jumps with his aim like crazy while once in a while he does absolutly random 360 spins
i mean this guy might as well not peg perfect circles with his stick - or even more likely is using Dual Zone Mode and pegs the stick near the velocity jump which results in these strange aim jumps in the video
also hes aiming in such a large circle that sometimes he might get affected by the robots behind the walls, which funnily do activate the aim assist in the testrange sometimes too
so theres way too many factors that could cause this, the guy in the video needs to make it more obvious
just talking from how a developer would look at this, if anyone wants to see a change then better videos need to be made id say
Most of the people ive talked to here that are grand master and above all play with with at least 90 aim assist.
Hello guys. First i want to say thanks you for your support this community is very good.
I have my xim4 since 2 weeks. I play Overwatch. My configuration is G502 / 12KDPI / NO CURVES / NO STEADY AIM / NO ADS/ TURN ASSIST ON...
SENS XIM : 12,58
GAME SENS : 100/100
EXPONENTIAL RAMP
ANA/WIDOW SCOOP IG : 50
AIM ASSIST: 50
I have same sens for all heros.
But I have a question. My Xim4 flash red when I move my mouse. Is it a problem ? Or i can continues to play with this lights ? I am really satisfied with my settings but if it's bad thing to have this red lights i can change...
PS: sorry for my bad english. French here.
@Arthred thank you :)
Also why so many ppl play with curves ?
I play without curves and use turn assist to turn fast and i have no problem when i play genji/tracer... SR:3975
Hopefully getting the XIM in a week or so, can anyone recommend any other settings that have worked well?
I understand there are recommended settings when you have updated firmware etc.. But my mouse 'only' has 5k DPI so im not sure it will be optimal.
Im just gonna have to test and try different settings out obviously, just came in here for different options to try, hopefully that will take my 3,3k pleb console-pad rating upwards so i can push the 4k's :) I've played CS 1.6 professionally so hoping that'll help, even though i understand its not entirely 1:1 PC feel.
Hopefully getting the XIM in a week or so, can anyone recommend any other settings that have worked well?
I understand there are recommended settings when you have updated firmware etc.. But my mouse 'only' has 5k DPI so im not sure it will be optimal.
Im just gonna have to test and try different settings out obviously, just came in here for different options to try, hopefully that will take my 3,3k pleb console-pad rating upwards so i can push the 4k's :) I've played CS 1.6 professionally so hoping that'll help, even though i understand its not entirely 1:1 PC feel.
5k dpi is more then enough for xim just don't get the xim and think you're gonna be great overnight besides that like you said just try out different configs for yourself. everybody is different I've got two accounts in top 500 with my config but then theres people that tried my config and said it was @#$% :)
I would say start with no advance setting at first and just adjust your xim hip sense and get use to the xim overall then work your way from there.
Hopefully getting the XIM in a week or so, can anyone recommend any other settings that have worked well?
I understand there are recommended settings when you have updated firmware etc.. But my mouse 'only' has 5k DPI so im not sure it will be optimal.
Im just gonna have to test and try different settings out obviously, just came in here for different options to try, hopefully that will take my 3,3k pleb console-pad rating upwards so i can push the 4k's :) I've played CS 1.6 professionally so hoping that'll help, even though i understand its not entirely 1:1 PC feel.
5k dpi is more then enough for xim just don't get the xim and think you're gonna be great overnight besides that like you said just try out different configs for yourself. everybody is different I've got two accounts in top 500 with my config but then theres people that tried my config and said it was @#$% :)
I would say start with no advance setting at first and just adjust your xim hip sense and get use to the xim overall then work your way from there.
Yeah exactly what i was thinking, and im trying to have low expectations to avoid dissapointment and i realize it will be a learning curve. But the possibilities and advantages i foresee with my mouse aim are huge :P 8).
Probably will make a smurf and learn the XIM leveling it to 25.
Hey Body,
thank you so much for the advice, will absolutely bump my DPI to the max, do you what my XIM4 sensitivity should be if DPI is at 1750, is there a method of calculating balance DPI and XIM4 sens?
would you mind sharing your full setting with me please?
can you please explain what steady aim do ?
Thanks !
Hey bro,
what about boost, do you think I should add some too? if so, where should i begin, 500 ?
and thanks for your help
PS I sent you msg on PSN as well :D
Hey just wanted to share my config, I've reached top 100 on different 7 accounts and 4 of them have been top 10 at some point (I was number 1 just before the leaderboards came out season 4)
--------
equipment:
g502 Logitech mouse (12k dpi and angle snapping on)
k30 keyboard
Corsair gaming mouse mat (not sure exactly which one)
xim config:
sens 14
no curve
y/x ratio 1.1
boost 80
in game settings:
100 sens for both
aim assist 90% for mostly everything
some background:
I had never used MnK before getting the xim while I have had the xim for almost 4 months now I only started getting good on it about 2 months in. At first I got the xim just for fun to try it out but it grew on me and now I can't go back to controller ( I wasn't bad on controller I finished number 7 eu season 2) I main tracer/soldier but I can play pretty much everything at the highest tier. anyway just wanted to add my input ps all of my accounts are on avoid me because people be hatin thx
Hey just wanted to share my config, I've reached top 100 on different 7 accounts and 4 of them have been top 10 at some point (I was number 1 just before the leaderboards came out season 4)
--------
equipment:
g502 Logitech mouse (12k dpi and angle snapping on)
k30 keyboard
Corsair gaming mouse mat (not sure exactly which one)
xim config:
sens 14
no curve
y/x ratio 1.1
boost 80
in game settings:
100 sens for both
aim assist 90% for mostly everything
some background:
I had never used MnK before getting the xim while I have had the xim for almost 4 months now I only started getting good on it about 2 months in. At first I got the xim just for fun to try it out but it grew on me and now I can't go back to controller ( I wasn't bad on controller I finished number 7 eu season 2) I main tracer/soldier but I can play pretty much everything at the highest tier. anyway just wanted to add my input ps all of my accounts are on avoid me because people be hatin thx
How do you get out of the 2800-3200 ish area? Ive been hovering here for a while, and 1/3 of the games are either trolls and/or teammembers leaving. I also main DPS, mostly soldier but i play a pretty good Roadhog/Zarya aswell. I usually get 3-4 gold medals even sometimes when playing tank.. Whenever our setup sucks i try to pick whats necessary but then we usually lack damage output. I really dont want to blame "elo hell teams" but sometimes its very clear this game is really hard to carry in.
/rant over :D
Personally cant wait for the patch which will hopefully make the aiming more consistent.
Hey just wanted to share my config, I've reached top 100 on different 7 accounts and 4 of them have been top 10 at some point (I was number 1 just before the leaderboards came out season 4)
--------
equipment:
g502 Logitech mouse (12k dpi and angle snapping on)
k30 keyboard
Corsair gaming mouse mat (not sure exactly which one)
xim config:
sens 14
no curve
y/x ratio 1.1
boost 80
in game settings:
100 sens for both
aim assist 90% for mostly everything
some background:
I had never used MnK before getting the xim while I have had the xim for almost 4 months now I only started getting good on it about 2 months in. At first I got the xim just for fun to try it out but it grew on me and now I can't go back to controller ( I wasn't bad on controller I finished number 7 eu season 2) I main tracer/soldier but I can play pretty much everything at the highest tier. anyway just wanted to add my input ps all of my accounts are on avoid me because people be hatin thx
How do you get out of the 2800-3200 ish area? Ive been hovering here for a while, and 1/3 of the games are either trolls and/or teammembers leaving. I also main DPS, mostly soldier but i play a pretty good Roadhog/Zarya aswell. I usually get 3-4 gold medals even sometimes when playing tank.. Whenever our setup sucks i try to pick whats necessary but then we usually lack damage output. I really dont want to blame "elo hell teams" but sometimes its very clear this game is really hard to carry in.
/rant over :D
Personally cant wait for the patch which will hopefully make the aiming more consistent.
I do boosts sometimes and the easiest way to carry is either play tracer or run phara n mercy
Yeah my relative scope sensitivity was between 75 and 100. At first it was at 100 but then I started to lower it a little bit: Some higlights from Season 3:http://www.youtube.com/v/VOD6Xs4-Rz0&hd=1
Link: http://www.youtube.com/watch?v=VOD6Xs4-Rz0