XIM Community

Black Ops 3 "Anti-sticky Aim" Setup. (Updated 09/16/16)  (Read 170214 times)

Offline bluesfanpat

  • Member
  • *
  • Posts: 112
    • View Profile
  • Gamertag: Bluesfanpat
Re: Black Ops 3 (Anti-sticky Aim) Setup.
« Reply #15 on: 04:44 PM - 11/25/15 »
Can anyone post a screenshot of this curve? Just want to make sure it looks correct on my XIM :)

I'm currently at work, I'll try to get around to it soon.

Thanks! Also a quick question - are you using this same curve on both ADS and HIP?

Offline PUBzZz

  • MVP
  • *
  • Posts: 564
    • View Profile
Re: Black Ops 3 (Anti-sticky Aim) Setup.
« Reply #16 on: 06:09 PM - 11/25/15 »
Can anyone post a screenshot of this curve? Just want to make sure it looks correct on my XIM :)

I'm currently at work, I'll try to get around to it soon.

Thanks! Also a quick question - are you using this same curve on both ADS and HIP?

No the hip and ads curve are different.  The "Code" he gave us is for his whole BO3 profile.  You can just load his profile and take the Hip/Ads curves and set them up in a a new config if you want.
« Last Edit: 08:51 PM - 11/25/15 by PUBzZz »
PS4 | Xbox 1 | Xbox 360
Logitech G502 w/Hotline Comp Feet
Logitech G440 mouse pad
Logitech G13
Netduma
BenQ XL2420T
Sennheiser PC360 w/Astro Mixamp

Offline PUBzZz

  • MVP
  • *
  • Posts: 564
    • View Profile
Re: Black Ops 3 (Anti-sticky Aim) Setup.
« Reply #17 on: 06:12 PM - 11/25/15 »
I'm glad it worked out for you PUBzZz. Funny thing is, as much as I like the ADS curve, I'm really proud of that little HIP curve and Y,X ratio combo. I thought it was just me though, thanks for confirming. I tear it up with SMG's and shotguns at close range!

On a side note, I'll have to update the code later. I just noticed there's a NEW manager out.

Yeah that Hip fire is on point. Best I've seen out of any curve by far.  You do good work my friend.  It's truly a Happy Thanksgiving! lol

Also I see you have "angle snapping" in your signature. Are you still using that on your G502 in this game?  In the past I messed around with it but wasn't sure if it felt right to me.  I know some people say it's a NO NO but some people say Mouse on Console it's a YES YES. 
PS4 | Xbox 1 | Xbox 360
Logitech G502 w/Hotline Comp Feet
Logitech G440 mouse pad
Logitech G13
Netduma
BenQ XL2420T
Sennheiser PC360 w/Astro Mixamp

Offline RML

  • MVP
  • *
  • Posts: 4758
  • L1vE DiFfeR3nT
    • View Profile
Re: Black Ops 3 (Anti-sticky Aim) Setup.
« Reply #18 on: 06:30 PM - 11/25/15 »
Thanks! Also a quick question - are you using this same curve on both ADS and HIP?

No, the curves are drastically different. The HIP curve is to help with accurate HIP fire and yet maintain the ability to quickly turn around if necessary. The ADS curve is solely to help combat Aim Assist. It's not going to completely eliminate it, that wasn't my goal. IMO some aim assist is a good thing and you are doing yourself a disservice if you don't take advantage of it. However, TOO much aim assist is a BAD, BAD thing and can often mess with your aim. It either drags your cursor or can feel like an invisible bubble around the enemy that you have to push through. This can often cause you to over correct and over shoot your target.

When used correctly this curve will help you track targets without having to burst through that invisible bubble and also will keep fast moving targets from jerking your cursor all over the place.


I'm glad it worked out for you PUBzZz. Funny thing is, as much as I like the ADS curve, I'm really proud of that little HIP curve and Y,X ratio combo. I thought it was just me though, thanks for confirming. I tear it up with SMG's and shotguns at close range!

On a side note, I'll have to update the code later. I just noticed there's a NEW manager out.

Yeah that Hip fire is on point. Best I've seen out of any curve by far.  You do good work my friend.  It's truly a Happy Thanksgiving! lol

Also I see you have "angle snapping" in your signature. Are you still using that on your G502 in this game?  In the past I messed around with it but wasn't sure if it felt right to me.  I know some people say it's a NO NO but some people say Mouse on Console it's a YES YES. 

Yes, I still use Angle Snapping. I can't recommend it one way or the other. I will just say that it works for me because it's what I've always used and it's what I'm used to. So for me, YES I love AS and I feel like it helps my aim. I don't feel like I fight it at all, it simply helps me control the jitters a little bit. For some others that may have come from PC gaming it may be a NO GO.
« Last Edit: 06:35 PM - 11/25/15 by RML »
XB1 | C:M$ | XIM4 | Latest | BenQ 24" Monitor | Pad: Steel Series 9HD | Sony Nav | A: Sennheiser 650's/Mod mic/Sound Blaster X7 | M: G402 | D: 4000 | P: 1000 | AAA setup [ON]

Advanced Settings Info - http://community.xim.tech/index.php?topic=41264.0
Anti Aim Assist curve set for ANY FPS Game - http://community.xim.tech/index.php?topic=49063.0
Destiny Advanced Setup - http://community.xim.tech/index.php?topic=39989.0
Battlefield 1 Setup - http://community.xim.tech/index.php?topic=50289.0

Offline PUBzZz

  • MVP
  • *
  • Posts: 564
    • View Profile
Re: Black Ops 3 (Anti-sticky Aim) Setup.
« Reply #19 on: 09:12 PM - 11/25/15 »
So I tried 4000 Dpi.  let me just say this. Some people on here would say you buy a 12k dpi mouse and use it with the XIM4 which gets the best results when you use the mouses native/highest dpi.  However a good number of the G502 users on here use 8k dpi because it feels better. 

So going down to 4k just seems nuts but let me tell you I think you maybe a genius. Man I was getting dudes out of head glitches with a smg when I went to 4k dpi.  It just tracks so much better. I converted my sensitives from 8k to 4k and movement felt the same except my shot was even tighter.
PS4 | Xbox 1 | Xbox 360
Logitech G502 w/Hotline Comp Feet
Logitech G440 mouse pad
Logitech G13
Netduma
BenQ XL2420T
Sennheiser PC360 w/Astro Mixamp

Offline bluesfanpat

  • Member
  • *
  • Posts: 112
    • View Profile
  • Gamertag: Bluesfanpat
Re: Black Ops 3 (Anti-sticky Aim) Setup.
« Reply #20 on: 10:17 PM - 11/25/15 »
So I tried 4000 Dpi.  let me just say this. Some people on here would say you buy a 12k dpi mouse and use it with the XIM4 which gets the best results when you use the mouses native/highest dpi.  However a good number of the G502 users on here use 8k dpi because it feels better. 

So going down to 4k just seems nuts but let me tell you I think you maybe a genius. Man I was getting dudes out of head glitches with a smg when I went to 4k dpi.  It just tracks so much better. I converted my sensitives from 8k to 4k and movement felt the same except my shot was even tighter.

I switched to 4k on a 502 as well, pleased with the results so far!

Offline bluesfanpat

  • Member
  • *
  • Posts: 112
    • View Profile
  • Gamertag: Bluesfanpat
Re: Black Ops 3 (Anti-sticky Aim) Setup.
« Reply #21 on: 10:24 PM - 11/25/15 »
Thanks! Also a quick question - are you using this same curve on both ADS and HIP?

No, the curves are drastically different. The HIP curve is to help with accurate HIP fire and yet maintain the ability to quickly turn around if necessary. The ADS curve is solely to help combat Aim Assist. It's not going to completely eliminate it, that wasn't my goal. IMO some aim assist is a good thing and you are doing yourself a disservice if you don't take advantage of it. However, TOO much aim assist is a BAD, BAD thing and can often mess with your aim. It either drags your cursor or can feel like an invisible bubble around the enemy that you have to push through. This can often cause you to over correct and over shoot your target.

When used correctly this curve will help you track targets without having to burst through that invisible bubble and also will keep fast moving targets from jerking your cursor all over the place.


I'm glad it worked out for you PUBzZz. Funny thing is, as much as I like the ADS curve, I'm really proud of that little HIP curve and Y,X ratio combo. I thought it was just me though, thanks for confirming. I tear it up with SMG's and shotguns at close range!

On a side note, I'll have to update the code later. I just noticed there's a NEW manager out.

Yeah that Hip fire is on point. Best I've seen out of any curve by far.  You do good work my friend.  It's truly a Happy Thanksgiving! lol

Also I see you have "angle snapping" in your signature. Are you still using that on your G502 in this game?  In the past I messed around with it but wasn't sure if it felt right to me.  I know some people say it's a NO NO but some people say Mouse on Console it's a YES YES. 

Yes, I still use Angle Snapping. I can't recommend it one way or the other. I will just say that it works for me because it's what I've always used and it's what I'm used to. So for me, YES I love AS and I feel like it helps my aim. I don't feel like I fight it at all, it simply helps me control the jitters a little bit. For some others that may have come from PC gaming it may be a NO GO.

Thanks, what I meant was I only saw one curve code posted in your OP. Am I missing something? Normally in your posts (and others) you include one for HIP, one for ADS, and perhaps others as well like the Destiny one. But I only see the code for one curve currently

Offline RML

  • MVP
  • *
  • Posts: 4758
  • L1vE DiFfeR3nT
    • View Profile
Re: Black Ops 3 (Anti-sticky Aim) Setup.
« Reply #22 on: 10:36 PM - 11/25/15 »
Can anyone post a screenshot of this curve? Just want to make sure it looks correct on my XIM :)

I'm currently at work, I'll try to get around to it soon.

Thanks! Also a quick question - are you using this same curve on both ADS and HIP?

I added pics to the OP.

Also, I only posted one code because that's a FULL setup code. I'll have to update it though as there's a new 1115 manager now. That code includes my entire setup, just copy and paste it into a new BO3 config.


So I tried 4000 Dpi.  let me just say this. Some people on here would say you buy a 12k dpi mouse and use it with the XIM4 which gets the best results when you use the mouses native/highest dpi.  However a good number of the G502 users on here use 8k dpi because it feels better. 

So going down to 4k just seems nuts but let me tell you I think you maybe a genius. Man I was getting dudes out of head glitches with a smg when I went to 4k dpi.  It just tracks so much better. I converted my sensitives from 8k to 4k and movement felt the same except my shot was even tighter.

I don't know about the genius part, I would just say that we obviously like similar setups.  ;)

I believe that STv2 is just so precise that it no longer needs the high DPI values that STv1 worked well with.
« Last Edit: 11:08 PM - 11/25/15 by RML »
XB1 | C:M$ | XIM4 | Latest | BenQ 24" Monitor | Pad: Steel Series 9HD | Sony Nav | A: Sennheiser 650's/Mod mic/Sound Blaster X7 | M: G402 | D: 4000 | P: 1000 | AAA setup [ON]

Advanced Settings Info - http://community.xim.tech/index.php?topic=41264.0
Anti Aim Assist curve set for ANY FPS Game - http://community.xim.tech/index.php?topic=49063.0
Destiny Advanced Setup - http://community.xim.tech/index.php?topic=39989.0
Battlefield 1 Setup - http://community.xim.tech/index.php?topic=50289.0

Offline RML

  • MVP
  • *
  • Posts: 4758
  • L1vE DiFfeR3nT
    • View Profile
Re: Black Ops 3 (Anti-sticky Aim) Setup.
« Reply #23 on: 11:00 PM - 11/25/15 »
Added pics and ballistic codes to OP. Also updated all codes to the latest Firmware/Manager 20151120.
XB1 | C:M$ | XIM4 | Latest | BenQ 24" Monitor | Pad: Steel Series 9HD | Sony Nav | A: Sennheiser 650's/Mod mic/Sound Blaster X7 | M: G402 | D: 4000 | P: 1000 | AAA setup [ON]

Advanced Settings Info - http://community.xim.tech/index.php?topic=41264.0
Anti Aim Assist curve set for ANY FPS Game - http://community.xim.tech/index.php?topic=49063.0
Destiny Advanced Setup - http://community.xim.tech/index.php?topic=39989.0
Battlefield 1 Setup - http://community.xim.tech/index.php?topic=50289.0

Offline bluesfanpat

  • Member
  • *
  • Posts: 112
    • View Profile
  • Gamertag: Bluesfanpat
Re: Black Ops 3 "Anti-sticky Aim" Setup. (Updated 11/25/15)
« Reply #24 on: 12:13 AM - 11/26/15 »
Thanks! Makes so much more sense now :)

I'm set up trying this now. Feels pretty solid so far. I'm definitely at the very low end of sensitivity players from years of competitive CS with XXXXL mousepads haha.

Not sure if you snipe much, but would you probably not use this ADS curve for sniping since there's no aim assist  on those supposedly?

Offline RML

  • MVP
  • *
  • Posts: 4758
  • L1vE DiFfeR3nT
    • View Profile
Re: Black Ops 3 "Anti-sticky Aim" Setup. (Updated 11/25/15)
« Reply #25 on: 09:08 AM - 11/26/15 »
Thanks! Makes so much more sense now :)

I'm set up trying this now. Feels pretty solid so far. I'm definitely at the very low end of sensitivity players from years of competitive CS with XXXXL mousepads haha.

Not sure if you snipe much, but would you probably not use this ADS curve for sniping since there's no aim assist  on those supposedly?

I have not sniped at all with this TBH. My COD experience typically goes like this. Bought the game, AR's only for the first week or so. Bored with AR's, add Overkill and use the AR/Shotty combo. Bored with Overkill, pick up SMG. Bored with SMG, move on to sniping. Suck at sniping, finish off my COD experience with my Fav. SMG before shelving it and moving on to a DICE game.  :P

 
XB1 | C:M$ | XIM4 | Latest | BenQ 24" Monitor | Pad: Steel Series 9HD | Sony Nav | A: Sennheiser 650's/Mod mic/Sound Blaster X7 | M: G402 | D: 4000 | P: 1000 | AAA setup [ON]

Advanced Settings Info - http://community.xim.tech/index.php?topic=41264.0
Anti Aim Assist curve set for ANY FPS Game - http://community.xim.tech/index.php?topic=49063.0
Destiny Advanced Setup - http://community.xim.tech/index.php?topic=39989.0
Battlefield 1 Setup - http://community.xim.tech/index.php?topic=50289.0

Offline vel360

  • Member
  • *
  • Posts: 140
    • View Profile
Re: Black Ops 3 "Anti-sticky Aim" Setup. (Updated 11/25/15)
« Reply #26 on: 09:20 AM - 11/26/15 »
Nice curve ✌️

Hc-TDM k/d : 3.00 - 5,00

6000dpi

Hip: 5
ads: 2,5

Offline PUBzZz

  • MVP
  • *
  • Posts: 564
    • View Profile
Re: Black Ops 3 "Anti-sticky Aim" Setup. (Updated 11/25/15)
« Reply #27 on: 11:36 AM - 11/26/15 »
For anyone not 100% comfy with their current curve or setup they should give this curve/setup a try.  RML's hip curve is a game changer when it comes to hip firing.  Both the Hip and Ads curves are great in my opinion but that Hip curve will have you in awe. 

PS4 | Xbox 1 | Xbox 360
Logitech G502 w/Hotline Comp Feet
Logitech G440 mouse pad
Logitech G13
Netduma
BenQ XL2420T
Sennheiser PC360 w/Astro Mixamp

Offline marhag81

  • Member
  • *
  • Posts: 19
    • View Profile
Re: Black Ops 3 "Anti-sticky Aim" Setup. (Updated 11/25/15)
« Reply #28 on: 07:30 AM - 11/29/15 »
Can't you just turn off aim assist in-game if you don't like it?

Offline RML

  • MVP
  • *
  • Posts: 4758
  • L1vE DiFfeR3nT
    • View Profile
Re: Black Ops 3 "Anti-sticky Aim" Setup. (Updated 11/25/15)
« Reply #29 on: 08:49 AM - 11/29/15 »
Can't you just turn off aim assist in-game if you don't like it?



IMO some aim assist is a good thing and you are doing yourself a disservice if you don't take advantage of it. However, TOO much aim assist is a BAD, BAD thing and can often mess with your aim.

It's really about finding a happy medium.



« Last Edit: 09:01 AM - 11/29/15 by RML »
XB1 | C:M$ | XIM4 | Latest | BenQ 24" Monitor | Pad: Steel Series 9HD | Sony Nav | A: Sennheiser 650's/Mod mic/Sound Blaster X7 | M: G402 | D: 4000 | P: 1000 | AAA setup [ON]

Advanced Settings Info - http://community.xim.tech/index.php?topic=41264.0
Anti Aim Assist curve set for ANY FPS Game - http://community.xim.tech/index.php?topic=49063.0
Destiny Advanced Setup - http://community.xim.tech/index.php?topic=39989.0
Battlefield 1 Setup - http://community.xim.tech/index.php?topic=50289.0