XIM Community

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - slickrick

Pages: [1] 2 3 ... 6
Support / Re: [ACTIVE] Move controller freezes during game
« on: 01:24 PM - 03/18/18 »
that happens to me sometimes,  not often, the quick fix is to unplug the navs usb cable from the Apex and plug right back in. I use to have my dead zone setting higher on the nav and it would happen more frequent [ getting stuck in one direction] . I lower it down and it don't happen as much.  being ever nav  can have a little different deadzone you have to figure it out on your on. which is pretty easy. start with 75 if its a cod game and go up from there.

General Discussion / Re: Cronus max and APEX
« on: 10:50 PM - 03/17/18 »
I think CM is going to need to update their device to support 1000Hz throughput from the Apex. All I'm seeing on a CM is a big fat E code on the display when Apex is connected. Is your's working?

Titan One works at 125 and 250Hz, 500 and 1000Hz support is coming. Titan Two works at all Apex rates, including 500 and 1000Hz.

One option you can try is to bind Sprint to W (or whatever the Nav equivalent is) on the HIP page on the Apex. Deselect "Inherit" on ADS and unbind Sprint. That'll automatically activate sprint whenever in HIP, but will disable it in ADS.

It works well for most games, as long as it doesn't have a stamina bar (Fortnite PvE), or a kooky Sprint mechanic (Destiny).

Another option is to connect the Nav to the CM, then see if the CM works when connected to the Apex hub. I haven't tried that yet and have no idea if it works, but that'll bypass any 1000Hz performance hit and allow the auto-sprint to work.
mine works fine. lol I just turn on the xbox1x , stick in the cm and then plug the apex in with mouse and kb and controller already hooked to apex. I don't see a change in game witch was confusing because of the 1000Hz that I'm running the apex.I figure if the CM changed the Hz I  would have to change my ADS and hip sen. but it s the same. weird  .I think if the  CM is from an older batch it will not work.   what sucks is that if you buy a CM  you have to request a new one or you could be buying one pre 2015 that will not work according to CM website.

General Discussion / Cronus max and APEX
« on: 06:59 PM - 03/17/18 »
I'm going to get in trouble for asking this but here it goes. lol  . if I'm using my Apex at 1000Hz and the cronus cant run 1000Hz, whats that going to do to my performance? for what its worth I use the cronus with the sony nav so I only have to press analog stick forward instead of in to sprint. [its harder to press analog stick in holding it with one hand verses a controller with two] 

I've got the g903,  on it you can use all 4 buttons but the two forward buttons assign the same and so does the back, meaning that if I hit either forward button it does the same action.  does that make any since. lol

Hardware Compatbility / Re: Charging the Nintendo Joycon
« on: 06:44 PM - 03/13/18 »
I bought a docking charger at Walmart when I bought the joy con.

I'm left handed too. I use the g903.  just pull the game up on apex manager , tap the pencil in the left upper corner , scroll down on the hip window to actions.  when you get to the buttons you want  on the mouse make them what ever you want.

Support / Re: RESOLVED] APEX controller issue
« on: 03:51 AM - 03/12/18 »
got a new 2.0 usb hub and its working fine again.

Support / Re: [ACTIVE] APEX controller issue
« on: 10:49 AM - 03/11/18 »
thank you. ill get one today and go from there.lol

Support / Re: [ACTIVE] APEX controller issue
« on: 10:37 AM - 03/11/18 »
I'm not woried about the money I just want to confirm its a regular usb 2.0

Support / Re: [ACTIVE] APEX controller issue
« on: 10:28 AM - 03/11/18 »
I never tried it in game but on the apex manager app the controller is not being detected in slot 3 , but it is in the other 2....  is that just a regular usb hub? if so ill try replacing it.

Support / Re: [ACTIVE] APEX controller issue
« on: 09:47 AM - 03/11/18 »
I tried that before posting to the forum, for some reason on the apex manger app nothing is being detected in slot 3 where you would plug in the controller, if I put the controller in any other slot its detected. but what ever is pulgged into slot 3 is not. every thing has worked great until this morning. the same mouse and sony nav. is working fine with the xim4 but not the apex.

Support / [RESOLVED] APEX controller issue
« on: 08:57 AM - 03/11/18 »
 I'm having the same problem, I got the apex 5 days ago its worked perfect. turned on xbox1x this morning and its not detecting the elite controller. if I plug the apex in alone without  usb plugged in it does the same thing, it goes from red,yellow,green blue, to red. the same if I got the usb hub plugged in with g903, Sony nav.  I tried a hard reset of the xbox also.

General Discussion / Re: Looking for Xbox one players
« on: 07:26 AM - 03/11/18 »
 slickrick 6922 , if you add me as a friend  send me a IM on xbox so I no how you are.

General Discussion / Re: XB1 Club “XIM APEX”
« on: 04:59 PM - 03/09/18 »
don't they put people in different areas in different match's because of the ping?

Pages: [1] 2 3 ... 6